diff options
Diffstat (limited to 'target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch')
| -rw-r--r-- | target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch | 110 |
1 files changed, 0 insertions, 110 deletions
diff --git a/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch b/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch deleted file mode 100644 index b581f78d4b..0000000000 --- a/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch +++ /dev/null @@ -1,110 +0,0 @@ -From 840202d23892baaff74be11ec71c3ffc6ad6298e Mon Sep 17 00:00:00 2001 -From: Tim Harvey <tharvey@gateworks.com> -Date: Tue, 20 Jan 2015 08:46:55 -0800 -Subject: [PATCH] ARM: dts: imx6 ventana: Add PCI nodes for on-board PCI - devices - -If the PCI nodes are defined, drivers can access information from the DT. -For example, the sky2 enet driver can obtain the mac address configured -from the bootloader (which is applied to the DT node with the ethernet1 alias). - -Signed-off-by: Tim Harvey <tharvey@gateworks.com> ---- - arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 38 +++++++++++++++++++++++++++++++++-- - arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 38 +++++++++++++++++++++++++++++++++-- - 2 files changed, 72 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi -@@ -280,8 +280,42 @@ - reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - -- eth1: sky2@8 { /* MAC/PHY on bus 8 */ -- compatible = "marvell,sky2"; -+ pcie@0,0 { -+ /* 00:00.0 0604: 16c3:abcd root host-bridge */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ reg = <0x0 0 0 0 0>; -+ -+ pcie@0,0 { -+ /* 01:00.0 0604: 10b5:8609 PEX switch bridge */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ reg = <0x0 0 0 0 0>; -+ -+ /* -+ * GigE PCI dev node needs to be defined so that enet -+ * driver can use it to obtain its boot-loader -+ * specified MAC -+ */ -+ pcie@4,0 { -+ /* 02:04.0 0604: 10b5:8609: PEX port bridge */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ reg = <0x2000 0 0 0 0>; -+ -+ eth1: pci@0,0 { -+ /* 04:00.0 0200: 11ab:4380: GigE */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ reg = <0x0 0 0 0 0>; -+ compatible = "marvell,sky2"; -+ }; -+ }; -+ }; - }; - }; - ---- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi -@@ -369,8 +369,42 @@ - reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - -- eth1: sky2@8 { /* MAC/PHY on bus 8 */ -- compatible = "marvell,sky2"; -+ pcie@0,0 { -+ /* 00:00.0 0604: 16c3:abcd root host-bridge */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ reg = <0x0 0 0 0 0>; -+ -+ pcie@0,0 { -+ /* 01:00.0 0604: 10b5:8609 PEX switch bridge */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ reg = <0x0 0 0 0 0>; -+ -+ /* -+ * GigE PCI dev node needs to be defined so that enet -+ * driver can use it to obtain its boot-loader -+ * specified MAC -+ */ -+ pcie@8,0 { -+ /* 02:08.0 0604: 10b5:8609: PEX port bridge */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ reg = <0x4000 0 0 0 0>; -+ -+ eth1: pci@0,0 { -+ /* 08:00.0 0200: 11ab:4380: GigE */ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ device_type = "pci"; -+ reg = <0x0 0 0 0 0>; -+ compatible = "marvell,sky2"; -+ }; -+ }; -+ }; - }; - }; - |