diff options
Diffstat (limited to 'target/linux/imx6/image/bootscript-cubox')
| -rw-r--r-- | target/linux/imx6/image/bootscript-cubox | 19 |
1 files changed, 12 insertions, 7 deletions
diff --git a/target/linux/imx6/image/bootscript-cubox b/target/linux/imx6/image/bootscript-cubox index b639590720..2ed48ab941 100644 --- a/target/linux/imx6/image/bootscript-cubox +++ b/target/linux/imx6/image/bootscript-cubox @@ -4,10 +4,15 @@ echo "CuBox OpenWrt Boot script" setenv console console=ttymxc0,115200 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 # Find correct dtb -if test ${board_name} = CUBOXI && test ${board_rev} = MX6DL; then - setenv fdt_name imx6dl.dtb; -elif test ${board_name} = CUBOXI && test ${board_rev} = MX6Q; then - setenv fdt_name imx6q-cubox-i.dtb; +if test ${board_rev} = MX6DL; then + setenv fdt_soc_type imx6dl; +elif test ${board_rev} = MX6Q; then + setenv fdt_soc_type imx6q; +fi +if test ${board_name} = CUBOXI; then + setenv fdt_name ${fdt_soc_type}-cubox-i.dtb; +elif test ${board_name} = HUMMINGBOARD; then + setenv fdt_name ${fdt_soc_type}-hummingboard.dtb; fi # Set correct devtype and partition @@ -19,8 +24,8 @@ elif mmc dev 1; then fi # Boot from the SD card is supported at the moment -setenv bootargs "${console} root=/dev/mmcblk1p1 rw rootwait" +setenv bootargs "${console} root=/dev/mmcblk1p2 rw rootwait" mmc dev ${mmcdev} -load ${devtype} ${mmcdev}:${devplist} ${kernel_addr_r} /boot/openwrt-imx6-cubox-i-uImage -load ${devtype} ${mmcdev}:${devplist} ${fdt_addr_r} /boot/openwrt-imx6-${fdt_name} +load ${devtype} ${mmcdev}:${devplist} ${kernel_addr_r} /uImage +load ${devtype} ${mmcdev}:${devplist} ${fdt_addr_r} /${fdt_name} bootz ${kernel_addr_r} - ${fdt_addr_r} |