diff options
Diffstat (limited to 'target/linux/generic/pending-3.18/027-bcma-from-4.1.patch')
| -rw-r--r-- | target/linux/generic/pending-3.18/027-bcma-from-4.1.patch | 680 |
1 files changed, 680 insertions, 0 deletions
diff --git a/target/linux/generic/pending-3.18/027-bcma-from-4.1.patch b/target/linux/generic/pending-3.18/027-bcma-from-4.1.patch new file mode 100644 index 0000000000..c88a816fef --- /dev/null +++ b/target/linux/generic/pending-3.18/027-bcma-from-4.1.patch @@ -0,0 +1,680 @@ +--- a/drivers/bcma/bcma_private.h ++++ b/drivers/bcma/bcma_private.h +@@ -24,6 +24,7 @@ bool bcma_wait_value(struct bcma_device + int timeout); + void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core); + void bcma_init_bus(struct bcma_bus *bus); ++void bcma_unregister_cores(struct bcma_bus *bus); + int bcma_bus_register(struct bcma_bus *bus); + void bcma_bus_unregister(struct bcma_bus *bus); + int __init bcma_bus_early_register(struct bcma_bus *bus); +@@ -40,6 +41,9 @@ int bcma_bus_scan(struct bcma_bus *bus); + int bcma_sprom_get(struct bcma_bus *bus); + + /* driver_chipcommon.c */ ++void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); ++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); ++void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); + #ifdef CONFIG_BCMA_DRIVER_MIPS + void bcma_chipco_serial_init(struct bcma_drv_cc *cc); + extern struct platform_device bcma_pflash_dev; +@@ -50,6 +54,8 @@ int bcma_core_chipcommon_b_init(struct b + void bcma_core_chipcommon_b_free(struct bcma_drv_cc_b *ccb); + + /* driver_chipcommon_pmu.c */ ++void bcma_pmu_early_init(struct bcma_drv_cc *cc); ++void bcma_pmu_init(struct bcma_drv_cc *cc); + u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc); + u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc); + +@@ -98,7 +104,35 @@ static inline void __exit bcma_host_soc_ + #endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */ + + /* driver_pci.c */ ++#ifdef CONFIG_BCMA_DRIVER_PCI + u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++void bcma_core_pci_early_init(struct bcma_drv_pci *pc); ++void bcma_core_pci_init(struct bcma_drv_pci *pc); ++void bcma_core_pci_up(struct bcma_drv_pci *pc); ++void bcma_core_pci_down(struct bcma_drv_pci *pc); ++#else ++static inline void bcma_core_pci_early_init(struct bcma_drv_pci *pc) ++{ ++ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI); ++} ++static inline void bcma_core_pci_init(struct bcma_drv_pci *pc) ++{ ++ /* Initialization is required for PCI hosted bus */ ++ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI); ++} ++#endif ++ ++/* driver_pcie2.c */ ++#ifdef CONFIG_BCMA_DRIVER_PCI ++void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2); ++void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2); ++#else ++static inline void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2) ++{ ++ /* Initialization is required for PCI hosted bus */ ++ WARN_ON(pcie2->core->bus->hosttype == BCMA_HOSTTYPE_PCI); ++} ++#endif + + extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc); + +@@ -115,6 +149,39 @@ static inline void bcma_core_pci_hostmod + } + #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + ++/************************************************** ++ * driver_mips.c ++ **************************************************/ ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); ++void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ return 0; ++} ++static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) ++{ ++} ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++} ++#endif ++ ++/************************************************** ++ * driver_gmac_cmn.c ++ **************************************************/ ++ ++#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN ++void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc); ++#else ++static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) ++{ ++} ++#endif ++ + #ifdef CONFIG_BCMA_DRIVER_GPIO + /* driver_gpio.c */ + int bcma_gpio_init(struct bcma_drv_cc *cc); +--- a/drivers/bcma/driver_gpio.c ++++ b/drivers/bcma/driver_gpio.c +@@ -17,6 +17,8 @@ + + #include "bcma_private.h" + ++#define BCMA_GPIO_MAX_PINS 32 ++ + static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip) + { + return container_of(chip, struct bcma_drv_cc, gpio); +@@ -76,7 +78,7 @@ static void bcma_gpio_free(struct gpio_c + bcma_chipco_gpio_pullup(cc, 1 << gpio, 0); + } + +-#if IS_BUILTIN(CONFIG_BCM47XX) ++#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X) + static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) + { + struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); +@@ -204,6 +206,7 @@ static void bcma_gpio_irq_domain_exit(st + + int bcma_gpio_init(struct bcma_drv_cc *cc) + { ++ struct bcma_bus *bus = cc->core->bus; + struct gpio_chip *chip = &cc->gpio; + int err; + +@@ -215,14 +218,14 @@ int bcma_gpio_init(struct bcma_drv_cc *c + chip->set = bcma_gpio_set_value; + chip->direction_input = bcma_gpio_direction_input; + chip->direction_output = bcma_gpio_direction_output; +-#if IS_BUILTIN(CONFIG_BCM47XX) ++#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X) + chip->to_irq = bcma_gpio_to_irq; + #endif + #if IS_BUILTIN(CONFIG_OF) + if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) + chip->of_node = cc->core->dev.of_node; + #endif +- switch (cc->core->bus->chipinfo.id) { ++ switch (bus->chipinfo.id) { + case BCMA_CHIP_ID_BCM5357: + case BCMA_CHIP_ID_BCM53572: + chip->ngpio = 32; +@@ -231,13 +234,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c + chip->ngpio = 16; + } + +- /* There is just one SoC in one device and its GPIO addresses should be +- * deterministic to address them more easily. The other buses could get +- * a random base number. */ +- if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) +- chip->base = 0; +- else +- chip->base = -1; ++ /* ++ * On MIPS we register GPIO devices (LEDs, buttons) using absolute GPIO ++ * pin numbers. We don't have Device Tree there and we can't really use ++ * relative (per chip) numbers. ++ * So let's use predictable base for BCM47XX and "random" for all other. ++ */ ++#if IS_BUILTIN(CONFIG_BCM47XX) ++ chip->base = bus->num * BCMA_GPIO_MAX_PINS; ++#else ++ chip->base = -1; ++#endif + + err = bcma_gpio_irq_domain_init(cc); + if (err) +--- a/drivers/bcma/driver_pci.c ++++ b/drivers/bcma/driver_pci.c +@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm + } + EXPORT_SYMBOL_GPL(bcma_core_pci_power_save); + +-int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, +- bool enable) +-{ +- struct pci_dev *pdev; +- u32 coremask, tmp; +- int err = 0; +- +- if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) { +- /* This bcma device is not on a PCI host-bus. So the IRQs are +- * not routed through the PCI core. +- * So we must not enable routing through the PCI core. */ +- goto out; +- } +- +- pdev = pc->core->bus->host_pci; +- +- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); +- if (err) +- goto out; +- +- coremask = BIT(core->core_index) << 8; +- if (enable) +- tmp |= coremask; +- else +- tmp &= ~coremask; +- +- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); +- +-out: +- return err; +-} +-EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); +- + static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) + { + u32 w; +@@ -328,28 +295,12 @@ static void bcma_core_pci_extend_L1timer + bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); + } + +-void bcma_core_pci_up(struct bcma_bus *bus) ++void bcma_core_pci_up(struct bcma_drv_pci *pc) + { +- struct bcma_drv_pci *pc; +- +- if (bus->hosttype != BCMA_HOSTTYPE_PCI) +- return; +- +- pc = &bus->drv_pci[0]; +- + bcma_core_pci_extend_L1timer(pc, true); + } +-EXPORT_SYMBOL_GPL(bcma_core_pci_up); + +-void bcma_core_pci_down(struct bcma_bus *bus) ++void bcma_core_pci_down(struct bcma_drv_pci *pc) + { +- struct bcma_drv_pci *pc; +- +- if (bus->hosttype != BCMA_HOSTTYPE_PCI) +- return; +- +- pc = &bus->drv_pci[0]; +- + bcma_core_pci_extend_L1timer(pc, false); + } +-EXPORT_SYMBOL_GPL(bcma_core_pci_down); +--- a/drivers/bcma/driver_pci_host.c ++++ b/drivers/bcma/driver_pci_host.c +@@ -11,6 +11,7 @@ + + #include "bcma_private.h" + #include <linux/pci.h> ++#include <linux/slab.h> + #include <linux/export.h> + #include <linux/bcma/bcma.h> + #include <asm/paccess.h> +--- a/drivers/bcma/driver_pcie2.c ++++ b/drivers/bcma/driver_pcie2.c +@@ -10,6 +10,7 @@ + + #include "bcma_private.h" + #include <linux/bcma/bcma.h> ++#include <linux/pci.h> + + /************************************************** + * R/W ops. +@@ -156,14 +157,23 @@ static void pciedev_reg_pm_clk_period(st + + void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2) + { +- struct bcma_chipinfo *ci = &pcie2->core->bus->chipinfo; ++ struct bcma_bus *bus = pcie2->core->bus; ++ struct bcma_chipinfo *ci = &bus->chipinfo; + u32 tmp; + + tmp = pcie2_read32(pcie2, BCMA_CORE_PCIE2_SPROM(54)); + if ((tmp & 0xe) >> 1 == 2) + bcma_core_pcie2_cfg_write(pcie2, 0x4e0, 0x17); + +- /* TODO: Do we need pcie_reqsize? */ ++ switch (bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM4360: ++ case BCMA_CHIP_ID_BCM4352: ++ pcie2->reqsize = 1024; ++ break; ++ default: ++ pcie2->reqsize = 128; ++ break; ++ } + + if (ci->id == BCMA_CHIP_ID_BCM4360 && ci->rev > 3) + bcma_core_pcie2_war_delay_perst_enab(pcie2, true); +@@ -173,3 +183,18 @@ void bcma_core_pcie2_init(struct bcma_dr + pciedev_crwlpciegen2_180(pcie2); + pciedev_crwlpciegen2_182(pcie2); + } ++ ++/************************************************** ++ * Runtime ops. ++ **************************************************/ ++ ++void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2) ++{ ++ struct bcma_bus *bus = pcie2->core->bus; ++ struct pci_dev *dev = bus->host_pci; ++ int err; ++ ++ err = pcie_set_readrq(dev, pcie2->reqsize); ++ if (err) ++ bcma_err(bus, "Error setting PCI_EXP_DEVCTL_READRQ: %d\n", err); ++} +--- a/drivers/bcma/host_pci.c ++++ b/drivers/bcma/host_pci.c +@@ -213,16 +213,26 @@ static int bcma_host_pci_probe(struct pc + /* Initialize struct, detect chip */ + bcma_init_bus(bus); + ++ /* Scan bus to find out generation of PCIe core */ ++ err = bcma_bus_scan(bus); ++ if (err) ++ goto err_pci_unmap_mmio; ++ ++ if (bcma_find_core(bus, BCMA_CORE_PCIE2)) ++ bus->host_is_pcie2 = true; ++ + /* Register */ + err = bcma_bus_register(bus); + if (err) +- goto err_pci_unmap_mmio; ++ goto err_unregister_cores; + + pci_set_drvdata(dev, bus); + + out: + return err; + ++err_unregister_cores: ++ bcma_unregister_cores(bus); + err_pci_unmap_mmio: + pci_iounmap(dev, bus->mmio); + err_pci_release_regions: +@@ -283,9 +293,12 @@ static const struct pci_device_id bcma_p + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */ + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */ +@@ -310,3 +323,65 @@ void __exit bcma_host_pci_exit(void) + { + pci_unregister_driver(&bcma_pci_bridge_driver); + } ++ ++/************************************************** ++ * Runtime ops for drivers. ++ **************************************************/ ++ ++/* See also pcicore_up */ ++void bcma_host_pci_up(struct bcma_bus *bus) ++{ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ if (bus->host_is_pcie2) ++ bcma_core_pcie2_up(&bus->drv_pcie2); ++ else ++ bcma_core_pci_up(&bus->drv_pci[0]); ++} ++EXPORT_SYMBOL_GPL(bcma_host_pci_up); ++ ++/* See also pcicore_down */ ++void bcma_host_pci_down(struct bcma_bus *bus) ++{ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ if (!bus->host_is_pcie2) ++ bcma_core_pci_down(&bus->drv_pci[0]); ++} ++EXPORT_SYMBOL_GPL(bcma_host_pci_down); ++ ++/* See also si_pci_setup */ ++int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core, ++ bool enable) ++{ ++ struct pci_dev *pdev; ++ u32 coremask, tmp; ++ int err = 0; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) { ++ /* This bcma device is not on a PCI host-bus. So the IRQs are ++ * not routed through the PCI core. ++ * So we must not enable routing through the PCI core. */ ++ goto out; ++ } ++ ++ pdev = bus->host_pci; ++ ++ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); ++ if (err) ++ goto out; ++ ++ coremask = BIT(core->core_index) << 8; ++ if (enable) ++ tmp |= coremask; ++ else ++ tmp &= ~coremask; ++ ++ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); ++ ++out: ++ return err; ++} ++EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl); +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -363,7 +363,7 @@ static int bcma_register_devices(struct + return 0; + } + +-static void bcma_unregister_cores(struct bcma_bus *bus) ++void bcma_unregister_cores(struct bcma_bus *bus) + { + struct bcma_device *core, *tmp; + +--- a/drivers/net/wireless/b43/main.c ++++ b/drivers/net/wireless/b43/main.c +@@ -4770,7 +4770,7 @@ static void b43_wireless_core_exit(struc + switch (dev->dev->bus_type) { + #ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: +- bcma_core_pci_down(dev->dev->bdev->bus); ++ bcma_host_pci_down(dev->dev->bdev->bus); + break; + #endif + #ifdef CONFIG_B43_SSB +@@ -4817,9 +4817,9 @@ static int b43_wireless_core_init(struct + switch (dev->dev->bus_type) { + #ifdef CONFIG_B43_BCMA + case B43_BUS_BCMA: +- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0], ++ bcma_host_pci_irq_ctl(dev->dev->bdev->bus, + dev->dev->bdev, true); +- bcma_core_pci_up(dev->dev->bdev->bus); ++ bcma_host_pci_up(dev->dev->bdev->bus); + break; + #endif + #ifdef CONFIG_B43_SSB +--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c +@@ -4669,7 +4669,7 @@ static int brcms_b_attach(struct brcms_c + brcms_c_coredisable(wlc_hw); + + /* Match driver "down" state */ +- bcma_core_pci_down(wlc_hw->d11core->bus); ++ bcma_host_pci_down(wlc_hw->d11core->bus); + + /* turn off pll and xtal to match driver "down" state */ + brcms_b_xtal(wlc_hw, OFF); +@@ -4960,7 +4960,7 @@ static int brcms_b_up_prep(struct brcms_ + * Configure pci/pcmcia here instead of in brcms_c_attach() + * to allow mfg hotswap: down, hotswap (chip power cycle), up. + */ +- bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core, ++ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core, + true); + + /* +@@ -4970,12 +4970,12 @@ static int brcms_b_up_prep(struct brcms_ + */ + if (brcms_b_radio_read_hwdisabled(wlc_hw)) { + /* put SB PCI in down state again */ +- bcma_core_pci_down(wlc_hw->d11core->bus); ++ bcma_host_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + return -ENOMEDIUM; + } + +- bcma_core_pci_up(wlc_hw->d11core->bus); ++ bcma_host_pci_up(wlc_hw->d11core->bus); + + /* reset the d11 core */ + brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); +@@ -5172,7 +5172,7 @@ static int brcms_b_down_finish(struct br + + /* turn off primary xtal and pll */ + if (!wlc_hw->noreset) { +- bcma_core_pci_down(wlc_hw->d11core->bus); ++ bcma_host_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + } + } +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -435,6 +435,27 @@ static inline struct bcma_device *bcma_f + return bcma_find_core_unit(bus, coreid, 0); + } + ++#ifdef CONFIG_BCMA_HOST_PCI ++extern void bcma_host_pci_up(struct bcma_bus *bus); ++extern void bcma_host_pci_down(struct bcma_bus *bus); ++extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus, ++ struct bcma_device *core, bool enable); ++#else ++static inline void bcma_host_pci_up(struct bcma_bus *bus) ++{ ++} ++static inline void bcma_host_pci_down(struct bcma_bus *bus) ++{ ++} ++static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus, ++ struct bcma_device *core, bool enable) ++{ ++ if (bus->hosttype == BCMA_HOSTTYPE_PCI) ++ return -ENOTSUPP; ++ return 0; ++} ++#endif ++ + extern bool bcma_core_is_enabled(struct bcma_device *core); + extern void bcma_core_disable(struct bcma_device *core, u32 flags); + extern int bcma_core_enable(struct bcma_device *core, u32 flags); +--- a/include/linux/bcma/bcma_driver_pci.h ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -238,13 +238,13 @@ struct bcma_drv_pci { + #define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) + #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +-extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc); +-extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +-extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, +- struct bcma_device *core, bool enable); +-extern void bcma_core_pci_up(struct bcma_bus *bus); +-extern void bcma_core_pci_down(struct bcma_bus *bus); ++#ifdef CONFIG_BCMA_DRIVER_PCI + extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up); ++#else ++static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up) ++{ ++} ++#endif + + extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); + extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); +--- a/include/linux/bcma/bcma_driver_pcie2.h ++++ b/include/linux/bcma/bcma_driver_pcie2.h +@@ -143,6 +143,8 @@ + + struct bcma_drv_pcie2 { + struct bcma_device *core; ++ ++ u16 reqsize; + }; + + #define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset) +@@ -153,6 +155,4 @@ struct bcma_drv_pcie2 { + #define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set) + #define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask) + +-void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2); +- + #endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */ +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE + config BCMA_HOST_PCI + bool "Support for BCMA on PCI-host bus" + depends on BCMA_HOST_PCI_POSSIBLE ++ select BCMA_DRIVER_PCI + default y + + config BCMA_DRIVER_PCI_HOSTMODE +@@ -44,6 +45,22 @@ config BCMA_HOST_SOC + + If unsure, say N + ++config BCMA_DRIVER_PCI ++ bool "BCMA Broadcom PCI core driver" ++ depends on BCMA && PCI ++ default y ++ help ++ BCMA bus may have many versions of PCIe core. This driver ++ supports: ++ 1) PCIe core working in clientmode ++ 2) PCIe Gen 2 clientmode core ++ ++ In general PCIe (Gen 2) clientmode core is required on PCIe ++ hosted buses. It's responsible for initialization and basic ++ hardware management. ++ This driver is also prerequisite for a hostmode PCIe core ++ support. ++ + config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" + depends on BCMA && MIPS +--- a/drivers/bcma/Makefile ++++ b/drivers/bcma/Makefile +@@ -3,8 +3,8 @@ bcma-y += driver_chipcommon.o driver + bcma-y += driver_chipcommon_b.o + bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o + bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o +-bcma-y += driver_pci.o +-bcma-y += driver_pcie2.o ++bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pci.o ++bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pcie2.o + bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o + bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o + bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -663,14 +663,6 @@ struct bcma_drv_cc_b { + #define bcma_cc_maskset32(cc, offset, mask, set) \ + bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) + +-extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); +-extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); +- +-extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +-extern void bcma_chipco_resume(struct bcma_drv_cc *cc); +- +-void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); +- + extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); + + extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); +@@ -690,9 +682,6 @@ u32 bcma_chipco_gpio_pullup(struct bcma_ + u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value); + + /* PMU support */ +-extern void bcma_pmu_init(struct bcma_drv_cc *cc); +-extern void bcma_pmu_early_init(struct bcma_drv_cc *cc); +- + extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, + u32 value); + extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, +--- a/include/linux/bcma/bcma_driver_gmac_cmn.h ++++ b/include/linux/bcma/bcma_driver_gmac_cmn.h +@@ -91,10 +91,4 @@ struct bcma_drv_gmac_cmn { + #define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val) + #define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val) + +-#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN +-extern void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc); +-#else +-static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { } +-#endif +- + #endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */ +--- a/include/linux/bcma/bcma_driver_mips.h ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -39,21 +39,6 @@ struct bcma_drv_mips { + u8 early_setup_done:1; + }; + +-#ifdef CONFIG_BCMA_DRIVER_MIPS +-extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +-extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); +- +-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); +-#else +-static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +-static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } +- +-static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev) +-{ +- return 0; +-} +-#endif +- + extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); + + #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ |