diff options
Diffstat (limited to 'target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch')
-rw-r--r-- | target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch | 249 |
1 files changed, 0 insertions, 249 deletions
diff --git a/target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch b/target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch deleted file mode 100644 index 4ca9c8ba41..0000000000 --- a/target/linux/generic/backport-5.10/757-net-next-net-dsa-qca8k-initial-conversion-to-regmap-heper.patch +++ /dev/null @@ -1,249 +0,0 @@ -From 8b5f3f29a81a71934d004e21a1292c1148b05926 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith <ansuelsmth@gmail.com> -Date: Mon, 22 Nov 2021 16:23:44 +0100 -Subject: net: dsa: qca8k: initial conversion to regmap helper - -Convert any qca8k set/clear/pool to regmap helper and add -missing config to regmap_config struct. -Read/write/rmw operation are reworked to use the regmap helper -internally to keep the delta of this patch low. These additional -function will then be dropped when the code split will be proposed. - -Ipq40xx SoC have the internal switch based on the qca8k regmap but use -mmio for read/write/rmw operation instead of mdio. -In preparation for the support of this internal switch, convert the -driver to regmap API to later split the driver to common and specific -code. The overhead introduced by the use of regamp API is marginal as the -internal mdio will bypass it by using its direct access and regmap will be -used only by configuration functions or fdb access. - -Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - drivers/net/dsa/qca8k.c | 107 +++++++++++++++++++++--------------------------- - 1 file changed, 47 insertions(+), 60 deletions(-) - ---- a/drivers/net/dsa/qca8k.c -+++ b/drivers/net/dsa/qca8k.c -@@ -10,6 +10,7 @@ - #include <linux/phy.h> - #include <linux/netdevice.h> - #include <linux/bitfield.h> -+#include <linux/regmap.h> - #include <net/dsa.h> - #include <linux/of_net.h> - #include <linux/of_mdio.h> -@@ -152,6 +153,25 @@ qca8k_set_page(struct mii_bus *bus, u16 - static int - qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val) - { -+ return regmap_read(priv->regmap, reg, val); -+} -+ -+static int -+qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val) -+{ -+ return regmap_write(priv->regmap, reg, val); -+} -+ -+static int -+qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) -+{ -+ return regmap_update_bits(priv->regmap, reg, mask, write_val); -+} -+ -+static int -+qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) -+{ -+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx; - struct mii_bus *bus = priv->bus; - u16 r1, r2, page; - int ret; -@@ -172,8 +192,9 @@ exit: - } - - static int --qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val) -+qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) - { -+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx; - struct mii_bus *bus = priv->bus; - u16 r1, r2, page; - int ret; -@@ -194,8 +215,9 @@ exit: - } - - static int --qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) -+qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val) - { -+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx; - struct mii_bus *bus = priv->bus; - u16 r1, r2, page; - u32 val; -@@ -223,34 +245,6 @@ exit: - return ret; - } - --static int --qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val) --{ -- return qca8k_rmw(priv, reg, 0, val); --} -- --static int --qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val) --{ -- return qca8k_rmw(priv, reg, val, 0); --} -- --static int --qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) --{ -- struct qca8k_priv *priv = (struct qca8k_priv *)ctx; -- -- return qca8k_read(priv, reg, val); --} -- --static int --qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) --{ -- struct qca8k_priv *priv = (struct qca8k_priv *)ctx; -- -- return qca8k_write(priv, reg, val); --} -- - static const struct regmap_range qca8k_readable_ranges[] = { - regmap_reg_range(0x0000, 0x00e4), /* Global control */ - regmap_reg_range(0x0100, 0x0168), /* EEE control */ -@@ -282,26 +276,19 @@ static struct regmap_config qca8k_regmap - .max_register = 0x16ac, /* end MIB - Port6 range */ - .reg_read = qca8k_regmap_read, - .reg_write = qca8k_regmap_write, -+ .reg_update_bits = qca8k_regmap_update_bits, - .rd_table = &qca8k_readable_table, -+ .disable_locking = true, /* Locking is handled by qca8k read/write */ -+ .cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */ - }; - - static int - qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) - { -- int ret, ret1; - u32 val; - -- ret = read_poll_timeout(qca8k_read, ret1, !(val & mask), -- 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, -- priv, reg, &val); -- -- /* Check if qca8k_read has failed for a different reason -- * before returning -ETIMEDOUT -- */ -- if (ret < 0 && ret1 < 0) -- return ret1; -- -- return ret; -+ return regmap_read_poll_timeout(priv->regmap, reg, val, !(val & mask), 0, -+ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC); - } - - static int -@@ -568,7 +555,7 @@ qca8k_mib_init(struct qca8k_priv *priv) - int ret; - - mutex_lock(&priv->reg_mutex); -- ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); -+ ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); - if (ret) - goto exit; - -@@ -576,7 +563,7 @@ qca8k_mib_init(struct qca8k_priv *priv) - if (ret) - goto exit; - -- ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); -+ ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); - if (ret) - goto exit; - -@@ -597,9 +584,9 @@ qca8k_port_set_status(struct qca8k_priv - mask |= QCA8K_PORT_STATUS_LINK_AUTO; - - if (enable) -- qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask); -+ regmap_set_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask); - else -- qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask); -+ regmap_clear_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask); - } - - static u32 -@@ -861,8 +848,8 @@ qca8k_setup_mdio_bus(struct qca8k_priv * - * a dt-overlay and driver reload changed the configuration - */ - -- return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL, -- QCA8K_MDIO_MASTER_EN); -+ return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL, -+ QCA8K_MDIO_MASTER_EN); - } - - /* Check if the devicetree declare the port:phy mapping */ -@@ -1099,16 +1086,16 @@ qca8k_setup(struct dsa_switch *ds) - return ret; - - /* Make sure MAC06 is disabled */ -- ret = qca8k_reg_clear(priv, QCA8K_REG_PORT0_PAD_CTRL, -- QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); -+ ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL, -+ QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); - if (ret) { - dev_err(priv->dev, "failed disabling MAC06 exchange"); - return ret; - } - - /* Enable CPU Port */ -- ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, -- QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); -+ ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, -+ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); - if (ret) { - dev_err(priv->dev, "failed enabling CPU port"); - return ret; -@@ -1176,8 +1163,8 @@ qca8k_setup(struct dsa_switch *ds) - return ret; - - /* Enable ARP Auto-learning by default */ -- ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i), -- QCA8K_PORT_LOOKUP_LEARN); -+ ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i), -+ QCA8K_PORT_LOOKUP_LEARN); - if (ret) - return ret; - -@@ -1745,9 +1732,9 @@ qca8k_port_bridge_join(struct dsa_switch - /* Add this port to the portvlan mask of the other ports - * in the bridge - */ -- ret = qca8k_reg_set(priv, -- QCA8K_PORT_LOOKUP_CTRL(i), -- BIT(port)); -+ ret = regmap_set_bits(priv->regmap, -+ QCA8K_PORT_LOOKUP_CTRL(i), -+ BIT(port)); - if (ret) - return ret; - if (i != port) -@@ -1777,9 +1764,9 @@ qca8k_port_bridge_leave(struct dsa_switc - /* Remove this port to the portvlan mask of the other ports - * in the bridge - */ -- qca8k_reg_clear(priv, -- QCA8K_PORT_LOOKUP_CTRL(i), -- BIT(port)); -+ regmap_clear_bits(priv->regmap, -+ QCA8K_PORT_LOOKUP_CTRL(i), -+ BIT(port)); - } - - /* Set the cpu port to be the only one in the portvlan mask of |