diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch new file mode 100644 index 0000000000..69deca161f --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch @@ -0,0 +1,135 @@ +From 092ccf0415c720a1e9458a46fe75f77574027a55 Mon Sep 17 00:00:00 2001 +From: Florian Fainelli <f.fainelli@gmail.com> +Date: Tue, 18 Jul 2017 12:37:37 -0700 +Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board + support + +Adds support for the Broadcom reference board BCM947189ACDMBR which +features the following: + +* 128MB of DRAM +* External MoCA support through a Broadcom BCM6802 chip +* 1x external Gigabit PHY through the external BCM6802 +* 1x USB 2.0 port +* 1x PCIE slot +* Few configurable buttons and LEDs + +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/Makefile | 3 +- + arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++ + 2 files changed, 99 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -93,7 +93,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm953012hr.dtb \ + bcm953012k.dtb + dtb-$(CONFIG_ARCH_BCM_53573) += \ +- bcm47189-tenda-ac9.dtb ++ bcm47189-tenda-ac9.dtb \ ++ bcm947189acdbmr.dtb + dtb-$(CONFIG_ARCH_BCM_63XX) += \ + bcm963138dvt.dtb + dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm947189acdbmr.dts +@@ -0,0 +1,97 @@ ++/* ++ * Copyright (C) 2017 Broadcom ++ * Author: Florian Fainelli <f.fainelli@gmail.com> ++ * ++ * Licensed under the ISC license. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm53573.dtsi" ++ ++/ { ++ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573"; ++ model = "Broadcom BCM947189ACDBMR"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200 earlycon"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ wps { ++ label = "bcm53xx:blue:wps"; ++ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ 5ghz { ++ label = "bcm53xx:blue:5ghz"; ++ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ 2ghz { ++ label = "bcm53xx:blue:2ghz"; ++ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ restart { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wps { ++ label = "WPS"; ++ linux,code = <KEY_WPS_BUTTON>; ++ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ spi { ++ compatible = "spi-gpio"; ++ num-chipselects = <1>; ++ gpio-sck = <&chipcommon 21 0>; ++ gpio-miso = <&chipcommon 22 0>; ++ gpio-mosi = <&chipcommon 23 0>; ++ cs-gpios = <&chipcommon 24 0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ /* External BCM6802 MoCA chip is connected */ ++ }; ++}; ++ ++&pcie0 { ++ ranges = <0x00000000 0 0 0 0 0x00100000>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ bridge@0,0,0 { ++ reg = <0x0000 0 0 0 0>; ++ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ wifi@0,1,0 { ++ reg = <0x0000 0 0 0 0>; ++ ranges = <0x00000000 0 0 0 0x00100000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ }; ++ }; ++}; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>; ++}; |