diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-4.3/143-PCI-iproc-Fix-PCIe-reset-logic.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-4.3/143-PCI-iproc-Fix-PCIe-reset-logic.patch | 62 |
1 files changed, 0 insertions, 62 deletions
diff --git a/target/linux/bcm53xx/patches-4.3/143-PCI-iproc-Fix-PCIe-reset-logic.patch b/target/linux/bcm53xx/patches-4.3/143-PCI-iproc-Fix-PCIe-reset-logic.patch deleted file mode 100644 index b9020a5ac8..0000000000 --- a/target/linux/bcm53xx/patches-4.3/143-PCI-iproc-Fix-PCIe-reset-logic.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 199ff14100095d52cd1b232cc0f3b12f348b5b07 Mon Sep 17 00:00:00 2001 -From: Ray Jui <rjui@broadcom.com> -Date: Tue, 15 Sep 2015 17:39:18 -0700 -Subject: [PATCH 143/147] PCI: iproc: Fix PCIe reset logic - -The current reset logic does not always properly reset the device. For -example, in the case when the perst_b signal is already de-asserted in the -bootloader, the current reset logic fails to trigger a proper assert -> -de-assert reset sequence. - -Fix the issue by always triggering the proper reset sequence. - -Also explicitly select the desired reset source, i.e., perst_b, and reduce -the wait time after the device comes out of reset from 250 ms to 100 ms, -based on recommendation from the ASIC team. - -Tested-by: Vladimir Dreizin <vdreizin@broadcom.com> -Tested-by: Darren Edamura <dedamura@broadcom.com> -Signed-off-by: Ray Jui <rjui@broadcom.com> -Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> -Reviewed-by: Vladimir Dreizin <vdreizin@broadcom.com> -Reviewed-by: Trac Hoang <trhoang@broadcom.com> -Reviewed-by: Scott Branden <sbranden@broadcom.com> ---- - drivers/pci/host/pcie-iproc.c | 15 ++++++++++----- - 1 file changed, 10 insertions(+), 5 deletions(-) - ---- a/drivers/pci/host/pcie-iproc.c -+++ b/drivers/pci/host/pcie-iproc.c -@@ -31,6 +31,8 @@ - #include "pcie-iproc.h" - - #define CLK_CONTROL_OFFSET 0x000 -+#define EP_PERST_SOURCE_SELECT_SHIFT 2 -+#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) - #define EP_MODE_SURVIVE_PERST_SHIFT 1 - #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) - #define RC_PCIE_RST_OUTPUT_SHIFT 0 -@@ -119,15 +121,18 @@ static void iproc_pcie_reset(struct ipro - u32 val; - - /* -- * Configure the PCIe controller as root complex and send a downstream -- * reset -+ * Select perst_b signal as reset source. Put the device into reset, -+ * and then bring it out of reset - */ -- val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT; -+ val = readl(pcie->base + CLK_CONTROL_OFFSET); -+ val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & -+ ~RC_PCIE_RST_OUTPUT; - writel(val, pcie->base + CLK_CONTROL_OFFSET); - udelay(250); -- val &= ~EP_MODE_SURVIVE_PERST; -+ -+ val |= RC_PCIE_RST_OUTPUT; - writel(val, pcie->base + CLK_CONTROL_OFFSET); -- msleep(250); -+ msleep(100); - } - - static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus) |