diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.10/950-0375-overlays-Deprecate-and-delete-the-sdtweak-overlay.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.10/950-0375-overlays-Deprecate-and-delete-the-sdtweak-overlay.patch | 112 |
1 files changed, 112 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.10/950-0375-overlays-Deprecate-and-delete-the-sdtweak-overlay.patch b/target/linux/bcm27xx/patches-5.10/950-0375-overlays-Deprecate-and-delete-the-sdtweak-overlay.patch new file mode 100644 index 0000000000..72dc8877ce --- /dev/null +++ b/target/linux/bcm27xx/patches-5.10/950-0375-overlays-Deprecate-and-delete-the-sdtweak-overlay.patch @@ -0,0 +1,112 @@ +From 068c8b508a0501de9bda9d6d9a8c4ddc06cf7ff8 Mon Sep 17 00:00:00 2001 +From: Phil Elwell <phil@raspberrypi.com> +Date: Wed, 4 Nov 2020 11:25:02 +0000 +Subject: [PATCH] overlays: Deprecate and delete the sdtweak overlay + +The sdtweak overlay has been superseded by the board-specific +sd_* parameters such as sd_poll_once, sd_overclock etc. + +For example, replace: + + dtoverlay=sdtweak,poll_once + +with: + + dtparam=sd_poll_once + +Signed-off-by: Phil Elwell <phil@raspberrypi.com> +--- + arch/arm/boot/dts/overlays/Makefile | 1 - + arch/arm/boot/dts/overlays/README | 27 +++---------------- + arch/arm/boot/dts/overlays/overlay_map.dts | 4 +++ + .../arm/boot/dts/overlays/sdtweak-overlay.dts | 25 ----------------- + 4 files changed, 8 insertions(+), 49 deletions(-) + delete mode 100644 arch/arm/boot/dts/overlays/sdtweak-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -158,7 +158,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + sc16is752-spi1.dtbo \ + sdhost.dtbo \ + sdio.dtbo \ +- sdtweak.dtbo \ + sh1106-spi.dtbo \ + smi.dtbo \ + smi-dev.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2409,29 +2409,10 @@ Load: <Deprecated> + + + Name: sdtweak +-Info: Tunes the bcm2835-sdhost SD/MMC driver +- N.B. This functionality is now available via the sd_* dtparams in the +- base DTB. +-Load: dtoverlay=sdtweak,<param>=<val> +-Params: overclock_50 Clock (in MHz) to use when the MMC framework +- requests 50MHz +- +- force_pio Disable DMA support (default off) +- +- pio_limit Number of blocks above which to use DMA +- (default 1) +- +- debug Enable debug output (default off) +- +- poll_once Looks for a card once after booting. Useful +- for network booting scenarios to avoid the +- overhead of continuous polling. N.B. Using +- this option restricts the system to using a +- single card per boot (or none at all). +- (default off) +- +- enable Set to off to completely disable the interface +- (default on) ++Info: This overlay is now deprecated. Use the sd_* dtparams in the ++ base DTB, e.g. "dtoverlay=sdtweak,poll_once" becomes ++ "dtparam=sd_poll_once". ++Load: <Deprecated> + + + Name: sh1106-spi +--- a/arch/arm/boot/dts/overlays/overlay_map.dts ++++ b/arch/arm/boot/dts/overlays/overlay_map.dts +@@ -61,6 +61,10 @@ + deprecated = "use sdio,bus_width=1,gpios_22_25"; + }; + ++ sdtweak { ++ deprecated = "use 'dtparam=sd_poll_once' etc."; ++ }; ++ + spi0-cs { + renamed = "spi0-2cs"; + }; +--- a/arch/arm/boot/dts/overlays/sdtweak-overlay.dts ++++ /dev/null +@@ -1,25 +0,0 @@ +-/dts-v1/; +-/plugin/; +- +-/* Provide backwards compatible aliases for the old sdhost dtparams. */ +- +-/{ +- compatible = "brcm,bcm2835"; +- +- fragment@0 { +- target = <&sdhost>; +- frag0: __overlay__ { +- brcm,overclock-50 = <0>; +- brcm,pio-limit = <1>; +- }; +- }; +- +- __overrides__ { +- overclock_50 = <&frag0>,"brcm,overclock-50:0"; +- force_pio = <&frag0>,"brcm,force-pio?"; +- pio_limit = <&frag0>,"brcm,pio-limit:0"; +- debug = <&frag0>,"brcm,debug?"; +- enable = <&frag0>,"status"; +- poll_once = <&frag0>,"non-removable?"; +- }; +-}; |