diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-4.19/950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-4.19/950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch b/target/linux/bcm27xx/patches-4.19/950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch new file mode 100644 index 0000000000..7ad61b65fb --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0710-ARM-dts-bcm283x-Define-MMC-interfaces-at-board-level.patch @@ -0,0 +1,194 @@ +From a1905aed89ee45f6662f03b77dc604ff1a169671 Mon Sep 17 00:00:00 2001 +From: Stefan Wahren <wahrenst@gmx.net> +Date: Tue, 17 Sep 2019 19:16:17 +0200 +Subject: [PATCH] ARM: dts: bcm283x: Define MMC interfaces at board + level + +commit e7774049ff255c8ba72bcee9c7ab307a95e8d7bc upstream. + +Starting with RPi 4 this is the first board, which doesn't use sdhost +as default SD interface. So the MMC interfaces should be defined finally at +board level. Since all boards using sdhci already does this, we can drop the +pinctrl part from bcm2835-rpi.dtsi. + +Signed-off-by: Stefan Wahren <wahrenst@gmx.net> +Acked-by: Eric Anholt <eric@anholt.net> +--- + arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 7 +++++++ + arch/arm/boot/dts/bcm2835-rpi-a.dts | 7 +++++++ + arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 7 +++++++ + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 7 +++++++ + arch/arm/boot/dts/bcm2835-rpi-b.dts | 7 +++++++ + arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | 7 +++++++ + arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 7 +++++++ + arch/arm/boot/dts/bcm2835-rpi-zero.dts | 7 +++++++ + arch/arm/boot/dts/bcm2835-rpi.dtsi | 13 ------------- + arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 7 +++++++ + 10 files changed, 63 insertions(+), 13 deletions(-) + +--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +@@ -108,6 +108,13 @@ + status = "okay"; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; +--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts +@@ -103,6 +103,13 @@ + status = "okay"; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; +--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +@@ -110,6 +110,13 @@ + status = "okay"; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; +--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +@@ -103,6 +103,13 @@ + status = "okay"; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; +--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts +@@ -98,6 +98,13 @@ + status = "okay"; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; +--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts +@@ -81,6 +81,13 @@ + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; +--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +@@ -129,6 +129,13 @@ + }; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; +--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts ++++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts +@@ -105,6 +105,13 @@ + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -84,19 +84,6 @@ + status = "okay"; + }; + +-&sdhci { +- pinctrl-names = "default"; +- pinctrl-0 = <&emmc_gpio48>; +- bus-width = <4>; +-}; +- +-&sdhost { +- pinctrl-names = "default"; +- pinctrl-0 = <&sdhost_gpio48>; +- status = "okay"; +- bus-width = <4>; +-}; +- + &usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; + }; +--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +@@ -48,6 +48,13 @@ + status = "okay"; + }; + ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; |