diff options
Diffstat (limited to 'target/linux/atheros/patches-3.10/100-board.patch')
| -rw-r--r-- | target/linux/atheros/patches-3.10/100-board.patch | 378 |
1 files changed, 211 insertions, 167 deletions
diff --git a/target/linux/atheros/patches-3.10/100-board.patch b/target/linux/atheros/patches-3.10/100-board.patch index d223677f54..36d861c3e0 100644 --- a/target/linux/atheros/patches-3.10/100-board.patch +++ b/target/linux/atheros/patches-3.10/100-board.patch @@ -144,8 +144,8 @@ + ar231x_board.radio = addr + 0x10000; + + if (ar231x_board.radio) { -+ /* broken board data detected, use radio data to find the offset, -+ * user will fix this */ ++ /* broken board data detected, use radio data to find the ++ * offset, user will fix this */ + return 1; + } + return 0; @@ -561,7 +561,7 @@ +#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h -@@ -0,0 +1,76 @@ +@@ -0,0 +1,79 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -590,24 +590,27 @@ + return 0; +} + -+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) ++static inline dma_addr_t ++plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return virt_to_phys(addr) + ar231x_dev_offset(dev); +} + -+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) ++static inline dma_addr_t ++plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return page_to_phys(page) + ar231x_dev_offset(dev); +} + -+static inline unsigned long plat_dma_addr_to_phys(struct device *dev, -+ dma_addr_t dma_addr) ++static inline unsigned long ++plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr - ar231x_dev_offset(dev); +} + -+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, -+ size_t size, enum dma_data_direction direction) ++static inline void ++plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size, ++ enum dma_data_direction direction) +{ +} + @@ -710,7 +713,7 @@ +#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h -@@ -0,0 +1,580 @@ +@@ -0,0 +1,615 @@ +/* + * Register definitions for AR2315+ + * @@ -759,56 +762,88 @@ +#define AR2315_RESET_COLD_APB 0x00000002 +#define AR2315_RESET_COLD_CPU 0x00000004 +#define AR2315_RESET_COLD_CPUWARM 0x00000008 -+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ ++#define AR2315_RESET_SYSTEM \ ++ (RESET_COLD_CPU |\ ++ RESET_COLD_APB |\ ++ RESET_COLD_AHB) /* full system */ +#define AR2317_RESET_SYSTEM 0x00000010 + + +#define AR2315_RESET (AR2315_DSLBASE + 0x0004) + -+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ -+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ -+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ -+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ -+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */ -+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */ -+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ -+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */ -+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */ -+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ -+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ -+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ ++/* warm reset WLAN0 MAC */ ++#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 ++/* warm reset WLAN0 BaseBand */ ++#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 ++/* warm reset MPEG-TS */ ++#define AR2315_RESET_MPEGTS_RSVD 0x00000004 ++/* warm reset PCI ahb/dma */ ++#define AR2315_RESET_PCIDMA 0x00000008 ++/* warm reset memory controller */ ++#define AR2315_RESET_MEMCTL 0x00000010 ++/* warm reset local bus */ ++#define AR2315_RESET_LOCAL 0x00000020 ++/* warm reset I2C bus */ ++#define AR2315_RESET_I2C_RSVD 0x00000040 ++/* warm reset SPI interface */ ++#define AR2315_RESET_SPI 0x00000080 ++/* warm reset UART0 */ ++#define AR2315_RESET_UART0 0x00000100 ++/* warm reset IR interface */ ++#define AR2315_RESET_IR_RSVD 0x00000200 ++/* cold reset ENET0 phy */ ++#define AR2315_RESET_EPHY0 0x00000400 ++/* cold reset ENET0 mac */ ++#define AR2315_RESET_ENET0 0x00000800 + +/* + * AHB master arbitration control + */ +#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008) + -+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */ -+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */ -+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ -+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */ -+#define AR2315_ARB_PCI 0x00000010 /* PCI */ -+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */ -+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */ ++/* CPU, default */ ++#define AR2315_ARB_CPU 0x00000001 ++/* WLAN */ ++#define AR2315_ARB_WLAN 0x00000002 ++/* MPEG-TS */ ++#define AR2315_ARB_MPEGTS_RSVD 0x00000004 ++/* LOCAL */ ++#define AR2315_ARB_LOCAL 0x00000008 ++/* PCI */ ++#define AR2315_ARB_PCI 0x00000010 ++/* Ethernet */ ++#define AR2315_ARB_ETHERNET 0x00000020 ++/* retry policy, debug only */ ++#define AR2315_ARB_RETRY 0x00000100 + +/* + * Config Register + */ +#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c) + -+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ -+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */ -+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ -+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */ -+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ -+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ -+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ -+ -+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ -+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */ ++/* EC - AHB bridge endianess */ ++#define AR2315_CONFIG_AHB 0x00000001 ++/* WLAN byteswap */ ++#define AR2315_CONFIG_WLAN 0x00000002 ++/* MPEG-TS byteswap */ ++#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 ++/* PCI byteswap */ ++#define AR2315_CONFIG_PCI 0x00000008 ++/* Memory controller endianess */ ++#define AR2315_CONFIG_MEMCTL 0x00000010 ++/* Local bus byteswap */ ++#define AR2315_CONFIG_LOCAL 0x00000020 ++/* Ethernet byteswap */ ++#define AR2315_CONFIG_ETHERNET 0x00000040 ++ ++/* CPU write buffer merge */ ++#define AR2315_CONFIG_MERGE 0x00000200 ++/* CPU big endian */ ++#define AR2315_CONFIG_CPU 0x00000400 +#define AR2315_CONFIG_PCIAHB 0x00000800 +#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000 -+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */ ++/* SPI byteswap */ ++#define AR2315_CONFIG_SPI 0x00008000 +#define AR2315_CONFIG_CPU_DRAM 0x00010000 +#define AR2315_CONFIG_CPU_PCI 0x00020000 +#define AR2315_CONFIG_CPU_MMR 0x00040000 @@ -842,7 +877,8 @@ +#define AR2315_IF_DISABLED 0 +#define AR2315_IF_PCI 1 +#define AR2315_IF_TS_LOCAL 2 -+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */ ++/* only for emulation with separate pins */ ++#define AR2315_IF_ALL 3 +#define AR2315_IF_LOCAL_HOST 0x00000008 +#define AR2315_IF_PCI_HOST 0x00000010 +#define AR2315_IF_PCI_INTR 0x00000020 @@ -861,23 +897,23 @@ +#define AR2315_IMR (AR2315_DSLBASE + 0x0024) +#define AR2315_GISR (AR2315_DSLBASE + 0x0028) + -+#define AR2315_ISR_UART0 0x0001 /* high speed UART */ -+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */ -+#define AR2315_ISR_SPI 0x0004 /* SPI bus */ -+#define AR2315_ISR_AHB 0x0008 /* AHB error */ -+#define AR2315_ISR_APB 0x0010 /* APB error */ -+#define AR2315_ISR_TIMER 0x0020 /* timer */ -+#define AR2315_ISR_GPIO 0x0040 /* GPIO */ -+#define AR2315_ISR_WD 0x0080 /* watchdog */ -+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */ -+ -+#define AR2315_GISR_MISC 0x0001 -+#define AR2315_GISR_WLAN0 0x0002 -+#define AR2315_GISR_MPEGTS_RSVD 0x0004 -+#define AR2315_GISR_LOCALPCI 0x0008 -+#define AR2315_GISR_WMACPOLL 0x0010 -+#define AR2315_GISR_TIMER 0x0020 -+#define AR2315_GISR_ETHERNET 0x0040 ++#define AR2315_ISR_UART0 0x0001 /* high speed UART */ ++#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */ ++#define AR2315_ISR_SPI 0x0004 /* SPI bus */ ++#define AR2315_ISR_AHB 0x0008 /* AHB error */ ++#define AR2315_ISR_APB 0x0010 /* APB error */ ++#define AR2315_ISR_TIMER 0x0020 /* timer */ ++#define AR2315_ISR_GPIO 0x0040 /* GPIO */ ++#define AR2315_ISR_WD 0x0080 /* watchdog */ ++#define AR2315_ISR_IR_RSVD 0x0100 /* IR */ ++ ++#define AR2315_GISR_MISC 0x0001 ++#define AR2315_GISR_WLAN0 0x0002 ++#define AR2315_GISR_MPEGTS_RSVD 0x0004 ++#define AR2315_GISR_LOCALPCI 0x0008 ++#define AR2315_GISR_WMACPOLL 0x0010 ++#define AR2315_GISR_TIMER 0x0020 ++#define AR2315_GISR_ETHERNET 0x0040 + +/* + * Interrupt routing from IO to the processor IP bits @@ -898,9 +934,9 @@ +#define AR2315_WD (AR2315_DSLBASE + 0x0038) +#define AR2315_WDC (AR2315_DSLBASE + 0x003c) + -+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000 -+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */ -+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */ ++#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000 ++#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */ ++#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */ + +/* + * CPU Performance Counters @@ -908,21 +944,21 @@ +#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048) +#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c) + -+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */ -+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */ -+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */ -+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */ -+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */ -+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ -+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ -+ -+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */ -+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */ -+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ -+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ -+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */ -+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */ -+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */ ++#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */ ++#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */ ++#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */ ++#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */ ++#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */ ++#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ ++#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ ++ ++#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */ ++#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */ ++#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ ++#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ ++#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */ ++#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */ ++#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */ + +/* + * AHB Error Reporting. @@ -999,20 +1035,21 @@ +#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098) +#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0) + -+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */ -+#define AR2315_GPIO_CR_I(x) (0) /* input */ ++#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */ ++#define AR2315_GPIO_CR_I(x) (0) /* input */ + -+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */ -+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */ -+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */ -+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */ ++#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */ ++#define AR2315_GPIO_INT_M (0x3F) /* mask for int */ ++#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */ ++#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */ + -+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */ -+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */ -+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */ -+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */ -+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */ ++#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for ++ * AR5313_GPIO_INT_* macros */ ++#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */ ++#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */ ++#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */ ++#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */ + +#define AR2315_RESET_GPIO 5 +#define AR2315_NUM_GPIO 22 @@ -1096,7 +1133,7 @@ + * PCI Bus Interface Registers + */ +#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008) -+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ ++#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ + +#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c) +#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ @@ -1110,7 +1147,8 @@ +#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ +#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ +#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ -+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ ++#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache ++ * disable */ + +#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010) + @@ -1152,7 +1190,7 @@ +#define AR2315_PCI_EXT_INT 0x02000000 +#define AR2315_PCI_ABORT_INT 0x04000000 + -+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */ ++#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */ + +#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508) +#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ @@ -1170,44 +1208,44 @@ + * Local Bus Interface Registers + */ +#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000) -+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ -+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ -+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ -+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ -+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ -+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ -+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ -+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ -+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ -+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ -+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ -+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ -+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ -+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ -+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ -+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ -+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ -+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ -+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ -+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ -+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ -+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ -+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ -+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ -+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ ++#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ ++#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ ++#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ ++#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ ++#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ ++#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ ++#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ ++#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ ++#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ ++#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ ++#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ ++#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ ++#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ ++#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ ++#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ ++#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ ++#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ ++#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ ++#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ ++#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ ++#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ ++#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ ++#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ ++#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ ++#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ + +#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004) -+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */ ++#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */ + +#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008) -+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ ++#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ + +#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C) -+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ -+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ -+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ -+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ -+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ ++#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ ++#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ ++#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ ++#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ ++#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ +#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80 +#define AR2315_LBM_TIMEOUT_SHFT 7 +#define AR2315_LBM_PORTMUX 0x07000000 @@ -1255,32 +1293,32 @@ +/* + * IR Interface Registers + */ -+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000) -+ -+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */ -+ -+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800) -+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */ -+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */ -+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ -+#define AR2315_IRCTL_SAMPLECLK_SHFT 1 -+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ -+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14 -+ -+#define AR2315_IR_STATUS (AR2315_IR + 0x0804) -+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */ -+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */ -+ -+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808) -+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */ -+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */ -+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ -+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ -+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ -+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ -+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ -+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ -+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ ++#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000) ++ ++#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */ ++ ++#define AR2315_IR_CONTROL (AR2315_IR + 0x0800) ++#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */ ++#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */ ++#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor */ ++#define AR2315_IRCTL_SAMPLECLK_SHFT 1 ++#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk div */ ++#define AR2315_IRCTL_OUTPUTCLK_SHFT 14 ++ ++#define AR2315_IR_STATUS (AR2315_IR + 0x0804) ++#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */ ++#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */ ++ ++#define AR2315_IR_CONFIG (AR2315_IR + 0x0808) ++#define AR2315_IRCFG_INVIN 0x00000001 /* invert in polarity */ ++#define AR2315_IRCFG_INVOUT 0x00000002 /* invert out polarity */ ++#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ ++#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 ++#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 ++#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 ++#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 ++#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 ++#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 + +#define HOST_PCI_DEV_ID 3 +#define HOST_PCI_MBAR0 0x10000000 @@ -1517,11 +1555,11 @@ +#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ + +/* GPIO Control Register bit field definitions */ -+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */ -+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */ -+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ -+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ ++#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */ ++#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */ ++#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt*/ ++#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ +#define AR531X_NUM_GPIO 8 + + @@ -1529,7 +1567,7 @@ + --- /dev/null +++ b/arch/mips/ar231x/ar5312.c -@@ -0,0 +1,579 @@ +@@ -0,0 +1,582 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -1572,7 +1610,8 @@ +static void +ar5312_misc_irq_dispatch(void) +{ -+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR); ++ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ++ ar231x_read_reg(AR531X_IMR); + + if (ar231x_misc_intrs & AR531X_ISR_TIMER) { + do_IRQ(AR531X_MISC_IRQ_TIMER); @@ -1853,10 +1892,12 @@ + + /* Disable other flash banks */ + ar231x_write_reg(AR531X_FLASHCTL1, -+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC)); ++ ar231x_read_reg(AR531X_FLASHCTL1) & ++ ~(FLASHCTL_E | FLASHCTL_AC)); + + ar231x_write_reg(AR531X_FLASHCTL2, -+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); ++ ar231x_read_reg(AR531X_FLASHCTL2) & ++ ~(FLASHCTL_E | FLASHCTL_AC)); + + return (char *)KSEG1ADDR(AR531X_FLASH + 0x800000); +} @@ -2014,7 +2055,7 @@ + * + * cpu_freq = input_clock * MULT (where MULT is PLL multiplier) + * sys_freq = cpu_freq / 4 (used for APB clock, serial, -+ * flash, Timer, Watchdog Timer) ++ * flash, Timer, Watchdog Timer) + * + * cnt_freq = cpu_freq / 2 (use for CPU count/compare) + * @@ -2111,7 +2152,7 @@ + --- /dev/null +++ b/arch/mips/ar231x/ar2315.c -@@ -0,0 +1,693 @@ +@@ -0,0 +1,696 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -2171,7 +2212,8 @@ + ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO); + + /* Enable interrupt with edge detection */ -+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit)) ++ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != ++ AR2315_GPIO_CR_I(bit)) + return; + + if (bit >= 0) @@ -2197,7 +2239,8 @@ + else if (pending & CAUSEF_IP4) + do_IRQ(AR2315_IRQ_ENET0_INTRS); + else if (pending & CAUSEF_IP2) { -+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR); ++ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ++ ar231x_read_reg(AR2315_IMR); + + if (misc_intr & AR2315_ISR_SPI) + do_IRQ(AR531X_MISC_IRQ_SPI); @@ -2232,7 +2275,8 @@ + unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE; + + /* Enable interrupt with edge detection */ -+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio)) ++ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != ++ AR2315_GPIO_CR_I(gpio)) + return; + + gpiointmask |= (1 << gpio); @@ -2660,9 +2704,9 @@ + /* try reset the system via reset control */ + ar231x_write_reg(AR2315_COLD_RESET, AR2317_RESET_SYSTEM); + -+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround. -+ * give it some time to attempt a gpio based hardware reset -+ * (atheros reference design workaround) */ ++ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits ++ * a workaround. Give it some time to attempt a gpio based hardware ++ * reset (atheros reference design workaround) */ + gpio_request_one(AR2315_RESET_GPIO, GPIOF_OUT_INIT_LOW, "Reset"); + mdelay(100); + |