diff options
Diffstat (limited to 'target/linux/ath79/patches-5.15/939-mikrotik-rb91x.patch')
| -rw-r--r-- | target/linux/ath79/patches-5.15/939-mikrotik-rb91x.patch | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/target/linux/ath79/patches-5.15/939-mikrotik-rb91x.patch b/target/linux/ath79/patches-5.15/939-mikrotik-rb91x.patch new file mode 100644 index 0000000000..4a852886bf --- /dev/null +++ b/target/linux/ath79/patches-5.15/939-mikrotik-rb91x.patch @@ -0,0 +1,68 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -353,6 +353,13 @@ config GPIO_IXP4XX + IXP4xx series of chips. + + If unsure, say N. ++ ++config GPIO_LATCH ++ tristate "MikroTik RouterBOARD GPIO latch support" ++ depends on ATH79 ++ help ++ GPIO driver for latch on some MikroTik RouterBOARDs. ++ + config GPIO_LOGICVC + tristate "Xylon LogiCVC GPIO support" + depends on MFD_SYSCON && OF +@@ -529,6 +536,10 @@ config GPIO_ROCKCHIP + help + Say yes here to support GPIO on Rockchip SoCs. + ++config GPIO_RB91X_KEY ++ tristate "MikroTik RB91x board series reset key support" ++ depends on ATH79 ++ + config GPIO_SAMA5D2_PIOBU + tristate "SAMA5D2 PIOBU GPIO support" + depends on MFD_SYSCON +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -75,6 +75,7 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o + obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o + obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o + obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o ++obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o + obj-$(CONFIG_GPIO_LOGICVC) += gpio-logicvc.o + obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o + obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o +@@ -123,6 +124,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio + obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o + obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o + obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o ++obj-$(CONFIG_GPIO_RB91X_KEY) += gpio-rb91x-key.o + obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o + obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o + obj-$(CONFIG_GPIO_RDA) += gpio-rda.o +--- a/drivers/mtd/nand/raw/Kconfig ++++ b/drivers/mtd/nand/raw/Kconfig +@@ -570,4 +570,10 @@ config MTD_NAND_RB4XX + Enables support for the NAND flash chip on Mikrotik Routerboard + RB4xx series. + ++config MTD_NAND_RB91X ++ tristate "MikroTik RB91x NAND driver support" ++ depends on ATH79 && MTD_RAW_NAND ++ help ++ Enables support for the NAND flash chip on MikroTik RB91x series. ++ + endif # MTD_RAW_NAND +--- a/drivers/mtd/nand/raw/Makefile ++++ b/drivers/mtd/nand/raw/Makefile +@@ -60,6 +60,7 @@ obj-$(CONFIG_MTD_NAND_ROCKCHIP) += rock + obj-$(CONFIG_MTD_NAND_PL35X) += pl35x-nand-controller.o + obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o + obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o ++obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o + + nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o + nand-objs += nand_onfi.o |