diff options
Diffstat (limited to 'target/linux/ath79/dts')
| -rw-r--r-- | target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts new file mode 100644 index 0000000000..d899cff9ef --- /dev/null +++ b/target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9344.dtsi" + +/ { + model = "ZBT WD323"; + compatible = "zbtlink,zbt-wd323", "qca,ar9344"; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&enable_gpio15 &enable_gpio19>; + + sda-gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + + /* can be removed on 4.19 */ + gpios = <&gpio 19 GPIO_ACTIVE_LOW>, + <&gpio 15 GPIO_ACTIVE_LOW>; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&enable_gpio20_gpio22>; + + wifi { + label = "zbt-wd323:green:wifi"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + lan1 { + label = "zbt-wd323:orange:lan1"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "zbt-wd323:orange:lan2"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + }; +}; + +&wdt { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&enable_gpio21>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; +}; + +&usb { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +ð0 { + status = "okay"; + phy-handle = <&swphy4>; + mtd-mac-address = <&art 0x0>; +}; + +ð1 { + status = "okay"; + mtd-mac-address = <&art 0x6>; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <22000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot@0 { + reg = <0x0 0x40000>; + read-only; + }; + + uboot-env@40000 { + reg = <0x40000 0x10000>; + read-only; + }; + + firmware@50000 { + compatible = "denx,uimage"; + reg = <0x50000 0xfa0000>; + }; + + art: art@ff0000 { + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x1002>; +}; + +&pinmux { + enable_gpio15: pinmux_enable_gpio15 { + pinctrl-single,bits = <0xc 0x0 0xff000000>; + }; + + enable_gpio19: pinmux_enable_gpio19 { + pinctrl-single,bits = <0x10 0x0 0xff000000>; + }; + + enable_gpio20_gpio22: pinmux_enable_gpio20_gpio22 { + pinctrl-single,bits = <0x14 0x0 0xff00ff>; + }; + + enable_gpio21: pinmux_enable_gpio21 { + pinctrl-single,bits = <0x14 0x0 0xff00>; + }; +}; |