diff options
Diffstat (limited to 'target/linux/ath79/dts')
| -rw-r--r-- | target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts b/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts new file mode 100644 index 0000000000..61597c8909 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qca955x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "compex,wpj558-16m", "qca,qca9558"; + model = "Compex WPJ558 (16MB flash)"; + + aliases { + label-mac-device = ð0; + led-boot = &led_sig4; + led-failsafe = &led_sig4; + led-running = &led_sig4; + led-upgrade = &led_sig4; + }; + + leds { + compatible = "gpio-leds"; + + sig1 { + label = "red:sig1"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + sig2 { + label = "yellow:sig2"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + sig3 { + label = "green:sig3"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + led_sig4: sig4 { + label = "green:sig4"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + beeper { + compatible = "gpio-beeper"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x030000>; + read-only; + }; + + firmware@30000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x030000 0xfc0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ + 0x50 0xcc35cc35 /* LED_CTRL0 */ + 0x54 0x00000000 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6 STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x56000000 0x00000101 0x00001616>; + phy-handle = <&phy0>; + + nvmem-cells = <&macaddr_uboot_2e010>; + nvmem-cell-names = "mac-address"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; + +&pcie0 { + status = "okay"; +}; + +&uboot { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_uboot_2e010: macaddr@2e010 { + reg = <0x2e010 0x6>; + }; +}; |