diff options
Diffstat (limited to 'target/linux/ath79/dts')
25 files changed, 0 insertions, 2748 deletions
diff --git a/target/linux/ath79/dts/ar7100.dtsi b/target/linux/ath79/dts/ar7100.dtsi deleted file mode 100644 index 9957b8df60..0000000000 --- a/target/linux/ath79/dts/ar7100.dtsi +++ /dev/null @@ -1,204 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,ar7100"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar7100-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - interrupts = <3>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - usb_phy: usb-phy@18030000 { - compatible = "qca,ar7100-usb-phy"; - reg = <0x18030000 0x10>; - - reset-names = "usb-phy", "usb-host", "usb-ohci-dll"; - resets = <&rst 4>, <&rst 5>, <&rst 6>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <16>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar7100-pll", "syscon"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - /* The board must provides the ref clock */ - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - - rst: reset-controller@18060024 { - compatible = "qca,ar7100-reset"; - reg = <0x18060024 0x4>; - - #reset-cells = <1>; - }; - - pcie0: pcie-controller@180c0000 { - compatible = "qca,ar7100-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x17010000 0x100>; - reg-names = "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&cpuintc>; - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie0 0>; - status = "disabled"; - }; - }; - }; - - usb2: usb@1b000000 { - compatible = "generic-ehci"; - reg = <0x1b000000 0x1000>; - - interrupt-parent = <&cpuintc>; - interrupts = <3>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - has-synopsys-hc-bug; - - status = "disabled"; - }; - - usb1: usb@1c000000 { - compatible = "generic-ohci"; - reg = <0x1c000000 0x1000>; - - interrupt-parent = <&miscintc>; - interrupts = <6>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; - - spi: spi@1f000000 { - compatible = "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; -}; - -&cpuintc { - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; -}; - -&miscintc { - compatible = "qca,ar7100-misc-intc"; -}; - -ð0 { - compatible = "qca,ar7100-eth"; - reg = <0x19000000 0x200 - 0x18070000 0x4>; - - pll-data = <0x00110000 0x00001099 0x00991099>; - pll-reg = <0x4 0x10 17>; - pll-handle = <&pll>; - phy-mode = "rgmii"; - - resets = <&rst 8>, <&rst 9>; - reset-names = "phy", "mac"; -}; - -&mdio1 { - builtin-switch; -}; - -ð1 { - compatible = "qca,ar7100-eth"; - reg = <0x1a000000 0x200 - 0x18070004 0x4>; - - pll-data = <0x00110000 0x00001099 0x00991099>; - pll-reg = <0x4 0x14 19>; - pll-handle = <&pll>; - - phy-mode = "rgmii"; - - resets = <&rst 12>, <&rst 13>; - reset-names = "phy", "mac"; -}; diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts deleted file mode 100644 index a175fd7698..0000000000 --- a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts +++ /dev/null @@ -1,192 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar7100.dtsi" - -/ { - compatible = "netgear,wndr3800", "qca,ar7161"; - model = "Netgear WNDR3800"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "ref"; - clock-frequency = <40000000>; - }; - - reset-leds { - compatible = "reset-leds"; - - wps { - label = "netgear:green:usb"; - resets = <&rst 12>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - wps { - label = "netgear:orange:wps"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - power_green { - label = "netgear:green:power"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - power_orange { - label = "netgear:orange:power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wps_green { - label = "netgear:green:wps"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wan_green { - label = "netgear:green:wan"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - }; - - button@2 { - label = "wifi"; - linux,code = <BTN_2>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - }; - - rtl8366s { - compatible = "realtek,rtl8366s"; - gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>; - gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>; - - mdio-bus { - status = "okay"; - - phy-mask = <0x10>; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - }; - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l12805d"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x050000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x050000 0x020000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x70000 0xf80000>; - }; - - partition@3 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -ð0 { - status = "okay"; - - pll-data = <0x11110000 0x00001099 0x00991099>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -ð1 { - status = "okay"; - - pll-data = <0x11110000 0x00001099 0x00991099>; - - resets = <&rst 13>; - reset-names = "mac"; - - phy-handle = <&phy4>; -}; diff --git a/target/linux/ath79/dts/ar7241.dtsi b/target/linux/ath79/dts/ar7241.dtsi deleted file mode 100644 index 91ebea54e0..0000000000 --- a/target/linux/ath79/dts/ar7241.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "ar724x.dtsi" - -/ { - usb_phy: usb-phy { - compatible = "qca,ar7200-usb-phy"; - - reset-names = "usb-phy", "usb-suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - - status = "disabled"; - }; -}; - -&gpio { - ngpios = <20>; -}; - -&ahb { - usb: usb@1b000000 { - compatible = "generic-ehci"; - reg = <0x1b000000 0x1000>; - - interrupts = <3>; - - resets = <&rst 5>; - reset-names = "usb-host"; - - has-transaction-translator; - caps-offset = <0x100>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; -}; - -&mdio0 { - regmap = <ð1>; - builtin-switch; - resets = <&rst 22>; - reset-names = "mdio"; -}; - -ð0 { - compatible = "qca,ar7241-eth", "syscon"; - - pll-data = <0x00110000 0x00001099 0x00991099>; - - resets = <&rst 8>, <&rst 9>; - reset-names = "mac", "phy"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; - builtin-switch; -}; - -ð1 { - compatible = "qca,ar7241-eth", "syscon"; - - pll-data = <0x00110000 0x00001099 0x00991099>; - - resets = <&rst 12>, <&rst 13>; - reset-names = "mac", "phy"; - - phy-mode = "gmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-bullet-m.dts b/target/linux/ath79/dts/ar7241_ubnt-bullet-m.dts deleted file mode 100644 index 067c612516..0000000000 --- a/target/linux/ath79/dts/ar7241_ubnt-bullet-m.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ar7241_ubnt-xm.dtsi" - -/ { - compatible = "ubnt,xm", "qca,ar7241"; - model = "Ubiquiti Bullet M"; -}; - -ð1 { - compatible = "syscon"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-nano-m.dts b/target/linux/ath79/dts/ar7241_ubnt-nano-m.dts deleted file mode 100644 index 8fbd7a6eec..0000000000 --- a/target/linux/ath79/dts/ar7241_ubnt-nano-m.dts +++ /dev/null @@ -1,9 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ar7241_ubnt-xm.dtsi" - -/ { - compatible = "ubnt,nm", "qca,ar7241"; - model = "Ubiquiti Nanostation M"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-rocket-m.dts b/target/linux/ath79/dts/ar7241_ubnt-rocket-m.dts deleted file mode 100644 index e1ef6d7095..0000000000 --- a/target/linux/ath79/dts/ar7241_ubnt-rocket-m.dts +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ar7241_ubnt-xm.dtsi" - -/ { - compatible = "ubnt,rm", "qca,ar7241"; - model = "Ubiquiti Rocket M"; -}; - -ð1 { - compatible = "syscon"; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-unifi.dts b/target/linux/ath79/dts/ar7241_ubnt-unifi.dts deleted file mode 100644 index 1cb45e6afc..0000000000 --- a/target/linux/ath79/dts/ar7241_ubnt-unifi.dts +++ /dev/null @@ -1,142 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar7241.dtsi" - -/ { - compatible = "ubnt,unifi", "qca,ar7241"; - model = "Ubiquiti UniFi AP"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - - poll-interval = <20>; - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - led@0 { - label = "ubnt:green:dome"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - - led@1 { - label = "ubnt:orange:dome"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&pll { - clocks = <&extosc>; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l6405d"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0x750000>; - }; - - partition@3 { - label = "board_config"; - reg = <0x7a0000 0x010000>; - read-only; - }; - - partition@4 { - label = "cfg"; - reg = <0x7b0000 0x040000>; - read-only; - }; - - art: partition@5 { - label = "art"; - reg = <0x7f0000 0x010000>; - read-only; - }; - }; - }; -}; - -&pcie { - status = "okay"; - - ath9k@0000 { - reg = <0x0000 0 0 0 0>; - qca,no-eeprom; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "mii"; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - phy-handle = <&phy4>; -}; - -ð1 { - status = "okay"; - - compatible = "syscon"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-xm.dts b/target/linux/ath79/dts/ar7241_ubnt-xm.dts deleted file mode 100644 index efb01f7b51..0000000000 --- a/target/linux/ath79/dts/ar7241_ubnt-xm.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "ar7241_ubnt-xm.dtsi" - -/ { - compatible = "ubnt,xm", "qca,ar7241"; - model = "Ubiquiti Networks XM (rev 1.0) board"; -}; - -ð1 { - compatible = "syscon"; -}; diff --git a/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi b/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi deleted file mode 100644 index bea9adc5d4..0000000000 --- a/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar7241.dtsi" - -/ { - compatible = "ubnt,xm", "qca,ar7241"; - model = "Ubiquiti Networks XM (rev 1.0) board"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - -/* extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; -*/ - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - - poll-interval = <20>; - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - led@0 { - label = "ubnt:red:link1"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - - led@1 { - label = "ubnt:orange:link2"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - }; - - led@2 { - label = "ubnt:green:link3"; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - - led@3 { - label = "ubnt:green:link4"; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -/*&pll { - clocks = <&extosc>; -};*/ - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l6405d"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0x750000>; - }; - - partition@3 { - label = "board_config"; - reg = <0x7a0000 0x010000>; - read-only; - }; - - partition@4 { - label = "cfg"; - reg = <0x7b0000 0x040000>; - read-only; - }; - - art: partition@5 { - label = "art"; - reg = <0x7f0000 0x010000>; - read-only; - }; - }; - }; -}; - -&pcie { - status = "okay"; - - ath9k@0000 { - reg = <0x0000 0 0 0 0>; - qca,no-eeprom; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "mii"; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - - phy-mode = "mii"; - phy-handle = <&phy4>; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x6>; -}; diff --git a/target/linux/ath79/dts/ar7242.dtsi b/target/linux/ath79/dts/ar7242.dtsi deleted file mode 100644 index a5909a9b31..0000000000 --- a/target/linux/ath79/dts/ar7242.dtsi +++ /dev/null @@ -1,69 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "ar724x.dtsi" - -/ { - usb_phy: usb-phy { - compatible = "qca,ar7200-usb-phy"; - - reset-names = "usb-phy", "usb-suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - - status = "disabled"; - }; -}; - -&gpio { - ngpios = <20>; -}; - -&ahb { - usb: usb@1b000000 { - compatible = "generic-ehci"; - reg = <0x1b000000 0x1000>; - - interrupts = <3>; - - resets = <&rst 5>; - reset-names = "usb-host"; - - has-transaction-translator; - caps-offset = <0x100>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; -}; - -&mdio0 { - resets = <&rst 22>; - reset-names = "mdio"; -}; - -ð0 { - compatible = "qca,ar7242-eth", "syscon"; - - pll-data = <0x16000000 0x00000101 0x00001616>; - pll-reg = <0x4 0x2c 17>; - pll-handle = <&pll>; - - resets = <&rst 8>, <&rst 9>; - reset-names = "mac", "phy"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; - builtin-switch; -}; - -ð1 { - compatible = "qca,ar7242-eth", "syscon"; - - resets = <&rst 12>, <&rst 13>; - reset-names = "mac", "phy"; -}; diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts deleted file mode 100644 index 4e52e30b9d..0000000000 --- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar7242.dtsi" - -/ { - compatible = "buffalo,wzr-hp-g450h", "qca,ar7242"; - model = "Buffalo WZR-HP-G450H"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - - poll-interval = <20>; - button@0 { - label = "usb"; - linux,code = <BTN_2>; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button@2 { - label = "movie_engine"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - debounce-interval = <60>; - }; - - button@3 { - label = "aoss"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button@4 { - label = "router_off"; - linux,code = <BTN_5>; - gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - debounce-interval = <60>; - }; - - }; - - leds { - compatible = "gpio-leds"; - led@0 { - label = "buffalo:orange:security"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - }; - - led@1 { - label = "buffalo:red:diag"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - gpio_usb_power { - gpio-export,name = "wzr-hp-g450h:usb-power"; - gpio-export,output = <1>; - gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio0 { - status = "okay"; - phy-mask = <0x1>; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; -}; - -ð0 { - status = "okay"; - - phy-mode = "rgmii"; - pll-data = <0x62000000 0 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&uart { - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&pcie { - status = "okay"; - - ath9k@0000 { - reg = <0x0000 0 0 0 0>; - qca,no-eeprom; - }; -}; diff --git a/target/linux/ath79/dts/ar724x.dtsi b/target/linux/ath79/dts/ar724x.dtsi deleted file mode 100644 index 4108745113..0000000000 --- a/target/linux/ath79/dts/ar724x.dtsi +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,ar7240"; - - #address-cells = <1>; - #size-cells = <1>; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb: ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9132-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - interrupts = <3>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar7240-gpio", - "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <18>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar7240-pll", - "qca,ar7240-pll"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - /* The board must provides the ref clock */ - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar7240-reset", - "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; - - pcie: pcie-controller@180c0000 { - compatible = "qcom,ar7240-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x180c0000 0x1000>, /* CRP */ - <0x180f0000 0x100>, /* CTRL */ - <0x14000000 0x1000>; /* CFG */ - reg-names = "crp_base", "ctrl_base", "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&cpuintc>; - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie 0>; - status = "disabled"; - }; - }; - - spi: spi@1f000000 { - compatible = "qca,ar7240-spi", - "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&cpuintc { - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; -}; diff --git a/target/linux/ath79/dts/ar9132.dtsi b/target/linux/ath79/dts/ar9132.dtsi deleted file mode 100644 index 7a7a5f1b3d..0000000000 --- a/target/linux/ath79/dts/ar9132.dtsi +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <dt-bindings/clock/ath79-clk.h> - -/ { - compatible = "qca,ar9132"; - - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - cpuintc: interrupt-controller { - compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc"; - - interrupt-controller; - #interrupt-cells = <1>; - - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; - }; - - ahb { - compatible = "simple-bus"; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&cpuintc>; - - apb { - compatible = "simple-bus"; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&miscintc>; - - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9132-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns8250"; - reg = <0x18020000 0x20>; - interrupts = <3>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar9132-gpio", - "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <22>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar9132-pll", - "qca,ar9130-pll"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - /* The board must provides the ref clock */ - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - miscintc: interrupt-controller@18060010 { - compatible = "qca,ar9132-misc-intc", - "qca,ar7100-misc-intc"; - reg = <0x18060010 0x8>; - - interrupt-parent = <&cpuintc>; - interrupts = <6>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar9132-reset", - "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; - }; - - usb: usb@1b000100 { - compatible = "qca,ar7100-ehci", "generic-ehci"; - reg = <0x1b000100 0x100>; - - interrupts = <3>; - resets = <&rst 5>; - - has-transaction-translator; - - phy-names = "usb"; - phys = <&usb_phy>; - - status = "disabled"; - }; - - spi: spi@1f000000 { - compatible = "qca,ar9132-spi", "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - usb_phy: usb-phy { - compatible = "qca,ar7200-usb-phy"; - - reset-names = "usb-phy", "usb-suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - - status = "disabled"; - }; -}; diff --git a/target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts b/target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts deleted file mode 100644 index c3efe6631a..0000000000 --- a/target/linux/ath79/dts/ar9132_tl_wr1043nd_v1.dts +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9132.dtsi" - -/ { - compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132"; - model = "TP-Link TL-WR1043ND Version 1"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - - poll-interval = <20>; - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - button@1 { - label = "qss"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - leds { - compatible = "gpio-leds"; - led@0 { - label = "tp-link:green:usb"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - - led@1 { - label = "tp-link:green:system"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - - led@2 { - label = "tp-link:green:qss"; - gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; - }; - - led@3 { - label = "tp-link:green:wlan"; - gpios = <&gpio 9 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&pll { - clocks = <&extosc>; -}; - -&usb { - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "s25sl064a"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x020000>; - read-only; - }; - - partition@1 { - label = "firmware"; - reg = <0x020000 0x7D0000>; - }; - - partition@2 { - label = "art"; - reg = <0x7F0000 0x010000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ath79/dts/ar9330.dtsi b/target/linux/ath79/dts/ar9330.dtsi deleted file mode 100644 index 1439de1e66..0000000000 --- a/target/linux/ath79/dts/ar9330.dtsi +++ /dev/null @@ -1,160 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,ar9330"; - - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - chosen { - bootargs = "console=ttyATH0,115200"; - }; - - ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "qca,ar9330-uart"; - reg = <0x18020000 0x14>; - - interrupts = <3>; - - clocks = <&pll ATH79_CLK_REF>; - clock-names = "uart"; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar7100-gpio"; - reg = <0x18040000 0x34>; - interrupts = <2>; - - ngpios = <30>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - status = "disabled"; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar9330-pll"; - reg = <0x18050000 0x100>; - - #clock-cells = <1>; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; - }; - - usb: usb@1b000100 { - compatible = "chipidea,usb2"; - reg = <0x1b000000 0x200>; - - interrupts = <3>; - resets = <&rst 5>; - reset-names = "usb-host"; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; - - spi: spi@1f000000 { - compatible = "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - gmac: gmac@18070000 { - compatible = "qca,ar9330-gmac"; - reg = <0x18070000 0x4>; - }; - }; - - usb_phy: usb-phy { - compatible = "qca,ar7200-usb-phy"; - - reset-names = "usb-phy", "usb-suspend-override"; - resets = <&rst 4>, <&rst 3>; - - #phy-cells = <0>; - - status = "disabled"; - }; -}; - -&cpuintc { - qca,ddr-wb-channel-interrupts = <2>, <3>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>; -}; - -ð0 { - compatible = "qca,ar9330-eth", "syscon"; - - pll-data = <0x00110000 0x00001099 0x00991099>; - - resets = <&rst 9>; - reset-names = "mac"; -}; - -&mdio0 { - regmap = <ð1>; - builtin-switch; - resets = <&rst 23>; - reset-names = "mdio"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; - - builtin-switch; -}; - -ð1 { - compatible = "qca,ar9330-eth", "syscon"; - - pll-data = <0x00110000 0x00001099 0x00991099>; - phy-mode = "gmii"; - - resets = <&rst 13>; - reset-names = "mac"; -}; diff --git a/target/linux/ath79/dts/ar9330_gl_ar150.dts b/target/linux/ath79/dts/ar9330_gl_ar150.dts deleted file mode 100644 index 97beab1490..0000000000 --- a/target/linux/ath79/dts/ar9330_gl_ar150.dts +++ /dev/null @@ -1,162 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9330.dtsi" - -/ { - model = "GL.iNet GL-AR150"; - compatible = "glinet,ar150"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - wlan { - label = "gl-ar150:orange:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - lan { - label = "gl-ar150:green:lan"; - gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - wan { - label = "gl-ar150:green:wan"; - gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - manual { - label = "manual"; - linux,code = <BTN_7>; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - }; - - auto { - label = "auto"; - linux,code = <BTN_8>; - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; - gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - spiflash { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0xfa0000>; - }; - - art: partition@3 { - label = "ART"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "mii"; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - - phy-handle = <&phy4>; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <0>; - switch-phy-swap = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ar9331.dtsi b/target/linux/ath79/dts/ar9331.dtsi deleted file mode 100644 index b29c88a958..0000000000 --- a/target/linux/ath79/dts/ar9331.dtsi +++ /dev/null @@ -1,6 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "ar9330.dtsi" - -/ { - compatible = "qca,ar9331"; -}; diff --git a/target/linux/ath79/dts/ar9331_dpt_module.dts b/target/linux/ath79/dts/ar9331_dpt_module.dts deleted file mode 100644 index bcd863605b..0000000000 --- a/target/linux/ath79/dts/ar9331_dpt_module.dts +++ /dev/null @@ -1,79 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "DPTechnics DPT-Module"; - compatible = "dptechnics,dpt-module"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - system { - label = "dpt-module:green:system"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Winbond 25Q128FVSG SPI flash */ - spiflash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ar9331_dragino_ms14.dts b/target/linux/ath79/dts/ar9331_dragino_ms14.dts deleted file mode 100644 index e7c446aa71..0000000000 --- a/target/linux/ath79/dts/ar9331_dragino_ms14.dts +++ /dev/null @@ -1,103 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "Dragino MS14 (Dragino 2)"; - compatible = "dragino,ms14"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - wlan { - label = "dragino2:red:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - lan { - label = "dragino2:red:lan"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wan { - label = "dragino2:red:wan"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - system { - label = "dragino2:red:system"; - gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "jumpstart"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Winbond 25Q128BVFG SPI flash */ - spiflash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ar9331_ew_dorin.dts b/target/linux/ath79/dts/ar9331_ew_dorin.dts deleted file mode 100644 index fd18593807..0000000000 --- a/target/linux/ath79/dts/ar9331_ew_dorin.dts +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "Embedded Wireless Dorin"; - compatible = "embeddedwireless,dorin"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - status { - label = "dorin:green:status"; - gpios = <&gpio 21 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - spiflash { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0xfa0000>; - }; - - art: partition@3 { - label = "ART"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x1002>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <1>; - switch-phy-swap = <1>; - }; -}; - -&mdio1 { - status = "okay"; -}; diff --git a/target/linux/ath79/dts/ar9331_omega.dts b/target/linux/ath79/dts/ar9331_omega.dts deleted file mode 100644 index 1225b245fd..0000000000 --- a/target/linux/ath79/dts/ar9331_omega.dts +++ /dev/null @@ -1,79 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "Onion Omega"; - compatible = "onion,omega"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - system { - label = "onion:amber:system"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Winbond 25Q128FVSG SPI flash */ - spiflash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ar9331_tl_mr3020.dts b/target/linux/ath79/dts/ar9331_tl_mr3020.dts deleted file mode 100644 index 7439768a2b..0000000000 --- a/target/linux/ath79/dts/ar9331_tl_mr3020.dts +++ /dev/null @@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "TP-Link TL-MR3020"; - compatible = "tplink,tl-mr3020"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x2000000>; - }; - - leds { - compatible = "gpio-leds"; - - wlan { - label = "tp-link:green:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - lan { - label = "tp-link:green:lan"; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wps { - label = "tp-link:green:wps"; - gpios = <&gpio 26 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3g { - label = "tp-link:green:3g"; - gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - }; - - button@1 { - label = "sw1"; - linux,code = <BTN_0>; - gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; - }; - - button@2 { - label = "sw2"; - linux,code = <BTN_1>; - gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; - }; - }; - - reg_usb_vbus: reg_usb_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&ref { - clock-frequency = <25000000>; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - vbus-supply = <®_usb_vbus>; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - /* Spansion S25FL032PIF SPI flash */ - spiflash: s25sl032p@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl032p", "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - }; -}; diff --git a/target/linux/ath79/dts/ath79.dtsi b/target/linux/ath79/dts/ath79.dtsi deleted file mode 100644 index baf348207e..0000000000 --- a/target/linux/ath79/dts/ath79.dtsi +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpuintc: interrupt-controller { - compatible = "qca,ar7100-cpu-intc"; - - interrupt-controller; - #interrupt-cells = <1>; - }; - - ahb { - compatible = "simple-bus"; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&cpuintc>; - - apb { - compatible = "simple-bus"; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&miscintc>; - - miscintc: interrupt-controller@18060010 { - compatible = "qca,ar7240-misc-intc"; - reg = <0x18060010 0x4>; - - interrupt-parent = <&cpuintc>; - interrupts = <6>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - eth0: eth@19000000 { - status = "disabled"; - - compatible = "qca,ath79-eth", "syscon"; - reg = <0x19000000 0x200>; - - interrupts = <4>; - phy-mode = "mii"; - - mdio0: mdio-bus { - status = "disabled"; - - regmap = <ð0>; - - clocks = <&pll ATH79_CLK_MDIO>; - clock-names = "ref"; - }; - }; - - eth1: eth@1a000000 { - status = "disabled"; - - compatible = "qca,ath79-eth", "syscon"; - reg = <0x1a000000 0x200>; - - interrupts = <5>; - phy-mode = "mii"; - - mdio1: mdio-bus { - status = "disabled"; - - regmap = <ð1>; - - clocks = <&pll ATH79_CLK_MDIO>; - clock-names = "ref"; - }; - }; - }; -}; diff --git a/target/linux/ath79/dts/qca9557.dtsi b/target/linux/ath79/dts/qca9557.dtsi deleted file mode 100644 index 6058552372..0000000000 --- a/target/linux/ath79/dts/qca9557.dtsi +++ /dev/null @@ -1,201 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,qca9557"; - - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9557-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - - interrupts = <3>; - - clocks = <&pll ATH79_CLK_REF>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar9557-gpio", - "qca,ar9340-gpio"; - reg = <0x18040000 0x28>; - - interrupts = <2>; - ngpios = <24>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pinmux: pinmux@1804002c { - compatible = "pinctrl-single"; - - reg = <0x1804002c 0x40>; - - #size-cells = <0>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - jtag_disable_pins: pinmux_jtag_disable_pins { - pinctrl-single,bits = <0x40 0x2 0x2>; - }; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar9557-pll", - "qca,qca9550-pll"; - reg = <0x18050000 0x20>; - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar9557-reset", - "qca,ar7100-reset", - "simple-bus"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - interrupt-parent = <&cpuintc>; - - intc2: interrupt-controller@2 { - compatible = "qcom,qca9556-intc"; - - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - qcom,pending-bits = <0x1f0>, /* pcie rc1 */ - <0xf>; /* wmac */ - }; - - intc3: interrupt-controller@3 { - compatible = "qcom,qca9556-intc"; - - interrupts = <3>; - - interrupt-controller; - #interrupt-cells = <1>; - - qcom,pending-bits = <0x1f000>, /* pcie rc2 */ - <0x1000000>, /* usb1 */ - <0x10000000>; /* usb2 */ - }; - }; - - pcie0: pcie-controller@180c0000 { - compatible = "qcom,ar7240-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x180c0000 0x1000>, /* CRP */ - <0x180f0000 0x100>, /* CTRL */ - <0x14000000 0x1000>; /* CFG */ - reg-names = "crp_base", "ctrl_base", "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&intc2>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie0 0>; - status = "disabled"; - }; - }; - - spi: spi@1f000000 { - compatible = "qca,ar9557-spi", "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&mdio0 { - resets = <&rst 22>; - reset-names = "mdio"; -}; - -ð0 { - compatible = "qca,qca9550-eth", "syscon"; - - pll-data = <0x82000101 0x80000101 0x80001313>; - phy-mode = "rgmii"; - - resets = <&rst 9>; - reset-names = "mac"; -}; - -&mdio1 { - resets = <&rst 23>; - reset-names = "mdio"; -}; - -ð1 { - compatible = "qca,qca9550-eth", "syscon"; - - pll-data = <0x82000101 0x80000101 0x80001313>; - phy-mode = "sgmii"; - - resets = <&rst 13>; - reset-names = "mac"; -}; diff --git a/target/linux/ath79/dts/qca9558_om5p_ac.dts b/target/linux/ath79/dts/qca9558_om5p_ac.dts deleted file mode 100644 index 974b1c61f0..0000000000 --- a/target/linux/ath79/dts/qca9558_om5p_ac.dts +++ /dev/null @@ -1,176 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "qca9557.dtsi" - -/ { - compatible = "openmesh,om5p-ac-v2", "qca,qca9557"; - model = "OpenMesh OM5P-AC V2"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "ref"; - clock-frequency = <40000000>; - }; - - leds { - compatible = "gpio-leds"; - - power { - label = "om5pac:blue:power"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wifi_green { - label = "om5pac:green:wifi"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wifi_yellow { - label = "om5pac:yellow:wifi"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wifi_red { - label = "om5pac:red:wifi"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - button@0 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - gpio_pa_dcdc { - gpio-export,name = "om5pac:pa_dcdc"; - gpio-export,output = <1>; - gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; - }; - gpio_pa_high { - gpio-export,name = "om5pac:pa_high"; - gpio-export,output = <1>; - gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinmux { - pinmux_pa_dcdc_pins { - pinctrl-single,bits = <0x0 0xff00 0x0>; - }; - - pinmux_pa_high_pins { - pinctrl-single,bits = <0x10 0xff 0x0>; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&pll { - clocks = <&extosc>; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l12805d"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x850000 0x7a0000>; - }; - - partition@3 { - label = "ART"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii-id"; - }; -}; - -&mdio1 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "sgmii"; - }; -}; - -ð0 { - status = "okay"; - - phy-handle = <&phy4>; - phy-mode = "rgmii"; -}; - -ð1 { - status = "okay"; - - phy-handle = <&phy1>; - phy-mode = "sgmii"; -}; |