diff options
Diffstat (limited to 'target/linux/ath79/dts')
| -rw-r--r-- | target/linux/ath79/dts/ar9344_pcs_cr5000.dts | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9344_pcs_cr5000.dts b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts new file mode 100644 index 0000000000..0d38a3557e --- /dev/null +++ b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9344.dtsi" + +/ { + model = "PowerCloud Systems CR5000"; + compatible = "pcs,cr5000", "qca,ar9344"; + + aliases { + serial0 = &uart; + led-status = &status; + }; + + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + reset { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + wps { + label = "WPS button"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + status: power { + label = "pcs:amber:power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan2g { + label = "pcs:blue:wlan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + + wps_white { + label = "pcs:white:wps"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&spi { + num-cs = <1>; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x050000 0x07a0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&usb { + status = "okay"; + + port@1 { + reg = <1>; + #trigger-source-cells = <0>; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + +}; + +&usb_phy { + status = "okay"; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@168c,0030 { + compatible = "168c,0030"; + mtd-mac-address = <&art 0x5002>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + qca,ar8327-initvals = < + 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ + 0x10 0x81000080 /* POWER_ON_STRAP */ + 0x50 0xcc35cc35 /* LED_CTRL0 */ + 0x54 0xca35ca35 /* LED_CTRL1 */ + 0x58 0xc935c935 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M */ + pll-data = <0x06000000 0x00000101 0x00001616>; + + mtd-mac-address = <&art 0x0>; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + + aliases { + ag0 = ð1; + }; + + port@0 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <1 1>; + }; + + port@1 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <2 2>; + }; + + port@2 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <3 3>; + }; + + port@3 { + compatible = "swconfig,port"; + swconfig,segment = "lan"; + swconfig,portmap = <4 4>; + }; + + port@4 { + compatible = "swconfig,port"; + swconfig,segment = "wan"; + swconfig,portmap = <5 5>; + }; + +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x1002>; +}; |