diff options
Diffstat (limited to 'target/linux/ath79/dts/ar724x.dtsi')
-rw-r--r-- | target/linux/ath79/dts/ar724x.dtsi | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/target/linux/ath79/dts/ar724x.dtsi b/target/linux/ath79/dts/ar724x.dtsi deleted file mode 100644 index 4108745113..0000000000 --- a/target/linux/ath79/dts/ar724x.dtsi +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,ar7240"; - - #address-cells = <1>; - #size-cells = <1>; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb: ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9132-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - interrupts = <3>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar7240-gpio", - "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <18>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar7240-pll", - "qca,ar7240-pll"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - /* The board must provides the ref clock */ - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - rst: reset-controller@1806001c { - compatible = "qca,ar7240-reset", - "qca,ar7100-reset"; - reg = <0x1806001c 0x4>; - - #reset-cells = <1>; - }; - - pcie: pcie-controller@180c0000 { - compatible = "qcom,ar7240-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x180c0000 0x1000>, /* CRP */ - <0x180f0000 0x100>, /* CTRL */ - <0x14000000 0x1000>; /* CFG */ - reg-names = "crp_base", "ctrl_base", "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&cpuintc>; - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie 0>; - status = "disabled"; - }; - }; - - spi: spi@1f000000 { - compatible = "qca,ar7240-spi", - "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&cpuintc { - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; -}; |