diff options
Diffstat (limited to 'target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch')
| -rw-r--r-- | target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch b/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch new file mode 100644 index 0000000000..f2491f3496 --- /dev/null +++ b/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch @@ -0,0 +1,34 @@ +--- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c 2007-05-28 16:44:36.000000000 +0200 +@@ -618,7 +618,6 @@ + + + #if defined(CONFIG_NEW_LEDS) +- + static struct platform_device at91_leds = { + .name = "at91_leds", + .id = -1, +@@ -724,6 +723,10 @@ + * We need to drive the pin manually. Default is off (RTS is active low). + */ + at91_set_gpio_output(AT91_PIN_PA21, 1); ++ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */ ++ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */ ++ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */ ++ at91_set_deglitch(AT91_PIN_PA19, 1); + } + + static struct resource uart1_resources[] = { +@@ -835,6 +838,12 @@ + { + at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ + at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ ++ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ ++ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ ++ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */ ++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */ ++ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */ ++ at91_set_deglitch(AT91_PIN_PA24, 1); + } + + struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ |