diff options
Diffstat (limited to 'target/linux/ar71xx')
10 files changed, 171 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index f3625712e0..b73e26dfaa 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -12,7 +12,8 @@ get_status_led() { all0305) status_led="eap7660d:green:ds4" ;; - antminer-s1) + antminer-s1|\ + antminer-s3) status_led="bitmain:green:system" ;; ap132) diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index ec7303c066..89aefca8f7 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -36,6 +36,12 @@ antminer-s1) ucidef_set_led_wlan "wlan" "WLAN" "bitmain:green:wlan" "phy0tpt" ;; +antminer-s3) + ucidef_set_led_wlan "wlan" "WLAN" "bitmain:green:wlan" "phy0tpt" + ucidef_set_led_default "sys" "SYS" "bitmain:green:sys" "0" + ucidef_set_led_default "lan" "LAN" "bitmain:yellow:lan" "0" + ;; + ap113) ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 6762adfdd4..0eeae2b8c0 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -346,6 +346,7 @@ wp543) ;; antminer-s1 |\ +antminer-s3 |\ dir-505-a1) ucidef_set_interface_lan "eth1" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 8dbc6af34f..df93557bde 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -110,6 +110,9 @@ tplink_board_detect() { "04440001"*) model="BITMAIN ANTMINER S1" ;; + "04440003"*) + model="BITMAIN ANTMINER S3" + ;; "120000"*) model="MERCURY MAC1200R" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index c8eb8e401f..a4de4689ac 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -302,6 +302,7 @@ platform_check_image() { ;; antminer-s1 | \ + antminer-s3 | \ archer-c5 | \ archer-c7 | \ el-m150 | \ diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18 index 0af087d8cf..3de7c53ecc 100644 --- a/target/linux/ar71xx/config-3.18 +++ b/target/linux/ar71xx/config-3.18 @@ -42,6 +42,7 @@ CONFIG_ATH79_MACH_AP96=y CONFIG_ATH79_MACH_ARCHER_C7=y CONFIG_ATH79_MACH_AW_NR580=y CONFIG_ATH79_MACH_ANTMINER_S1=y +CONFIG_ATH79_MACH_ANTMINER_S3=y CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_CARAMBOLA2=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c new file mode 100644 index 0000000000..010c461acc --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c @@ -0,0 +1,98 @@ +/* + * Bitmain Antminer S3 board support + * + * Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "dev-usb.h" + +#define ANTMINER_S3_GPIO_LED_WLAN 0 +#define ANTMINER_S3_GPIO_LED_SYSTEM 17 +#define ANTMINER_S3_GPIO_LED_LAN 22 + +#define ANTMINER_S3_GPIO_BTN_RESET 11 + +#define ANTMINER_S3_KEYSPOLL_INTERVAL 88 /* msecs */ +#define ANTMINER_S3_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S3_KEYSPOLL_INTERVAL) + +static const char *ANTMINER_S3_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data ANTMINER_S3_flash_data = { + .part_probes = ANTMINER_S3_part_probes, +}; + +static struct gpio_led ANTMINER_S3_leds_gpio[] __initdata = { + { + .name = "bitmain:green:wlan", + .gpio = ANTMINER_S3_GPIO_LED_WLAN, + .active_low = 0, + },{ + .name = "bitmain:green:system", + .gpio = ANTMINER_S3_GPIO_LED_SYSTEM, + .active_low = 0, + },{ + .name = "bitmain:yellow:lan", + .gpio = ANTMINER_S3_GPIO_LED_LAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ANTMINER_S3_GPIO_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ANTMINER_S3_KEYSDEBOUNCE_INTERVAL, + .gpio = ANTMINER_S3_GPIO_BTN_RESET, + .active_low = 0, + }, +}; + +static void __init antminer_s3_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S3_leds_gpio), + ANTMINER_S3_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ANTMINER_S3_KEYSPOLL_INTERVAL, + ARRAY_SIZE(ANTMINER_S3_GPIO_keys), + ANTMINER_S3_GPIO_keys); + ath79_register_usb(); + + ath79_register_m25p80(&ANTMINER_S3_flash_data); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + + ath79_register_mdio(0, 0x0); + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_wmac(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_ANTMINER_S3, "ANTMINER-S3", + "Bitmain Antminer S3", antminer_s3_setup); diff --git a/target/linux/ar71xx/generic/profiles/antminer.mk b/target/linux/ar71xx/generic/profiles/antminer.mk index 366982c885..404133b8ca 100644 --- a/target/linux/ar71xx/generic/profiles/antminer.mk +++ b/target/linux/ar71xx/generic/profiles/antminer.mk @@ -15,3 +15,14 @@ define Profile/ANTMINER_S1/Description Package set optimized for the Bitmain Antminer S1. endef $(eval $(call Profile,ANTMINER_S1)) + +define Profile/ANTMINER_S3 + NAME:=Antminer S3 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid +endef + + +define Profile/ANTMINER_S1/Description + Package set optimized for the Bitmain Antminer S3. +endef +$(eval $(call Profile,ANTMINER_S3)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 3c052424bd..018385dabf 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -338,6 +338,14 @@ define Device/antminer-s1 CONSOLE := ttyATH0,115200 endef +define Device/antminer-s3 + $(Device/tplink-8mlzma) + BOARDNAME := ANTMINER-S3 + DEVICE_PROFILE := ANTMINER_S3 + TPLINK_HWID := 0x04440003 + CONSOLE := ttyATH0,115200 +endef + define Device/el-m150 $(Device/tplink-8mlzma) BOARDNAME := EL-M150 @@ -353,7 +361,7 @@ define Device/el-mini TPLINK_HWID := 0x01530001 CONSOLE := ttyATH0,115200 endef -TARGET_DEVICES += antminer-s1 el-m150 el-mini +TARGET_DEVICES += antminer-s1 antminer-s3 el-m150 el-mini define Device/gl-inet-6408A-v1 $(Device/tplink-8mlzma) diff --git a/target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch b/target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch new file mode 100644 index 0000000000..66eac1c169 --- /dev/null +++ b/target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -22,6 +21,7 @@ + ATH79_MACH_ALL0305, /* Allnet ALL0305 */ + ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ + ATH79_MACH_ANTMINER_S1, /* Bitmain Antminer S1 */ ++ ATH79_MACH_ANTMINER_S3, /* Bitmain Antminer S3 */ + ATH79_MACH_AP113, /* Atheros AP113 reference board */ + ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -66,6 +66,16 @@ + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_ANTMINER_S3 ++ bool "Bitmain Antminer S3 support" ++ select SOC_AR933X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_AP113 + bool "Atheros AP113 board support" + select SOC_AR724X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -43,6 +43,7 @@ + obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o + obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o + obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o ++obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o + obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o + obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o + obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o |