diff options
Diffstat (limited to 'target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch b/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch new file mode 100644 index 0000000000..46657940b8 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/200-spi-ath79-fix-initial-GPIO-CS-line-setup.patch @@ -0,0 +1,37 @@ +From 3a7853f0dd24e81dc920c98a5c7e8cfdde81bb45 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Thu, 16 Jan 2014 16:58:58 +0100 +Subject: [PATCH] spi-ath79: fix initial GPIO CS line setup + +The 'ath79_spi_setup_cs' function initializes the chip +select line of a given SPI device in order to make sure +that the device is inactive. + +If the SPI_CS_HIGH bit is set for a given device, it +means that the CS line of that device is active HIGH +so it must be set to LOW initially. In case of GPIO +CS lines, the 'ath79_spi_setup_cs' function does the +opposite of that due to the wrong GPIO flags. + +Fix the code to use the correct GPIO flags. + +Reported-by: Ronald Wahl <ronald.wahl@raritan.com> +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + drivers/spi/spi-ath79.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -132,9 +132,9 @@ static int ath79_spi_setup_cs(struct spi + + flags = GPIOF_DIR_OUT; + if (spi->mode & SPI_CS_HIGH) +- flags |= GPIOF_INIT_HIGH; +- else + flags |= GPIOF_INIT_LOW; ++ else ++ flags |= GPIOF_INIT_HIGH; + + status = gpio_request_one(cdata->gpio, flags, + dev_name(&spi->dev)); |