1 files changed, 132 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c
new file mode 100644
index 0000000000..1c74fed98e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c
@@ -0,0 +1,132 @@
+/*
+ *  TP-LINK TL-WA830RE v2 board support
+ *
+ *  Copyright (C) 2014 Fredrik Jonson <fredrik@famjonson.se>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WA830REV2_GPIO_LED_WLAN	13
+#define TL_WA830REV2_GPIO_LED_QSS	15
+#define TL_WA830REV2_GPIO_LED_LAN	18
+#define TL_WA830REV2_GPIO_LED_SYSTEM	14
+
+#define TL_WA830REV2_GPIO_BTN_RESET	17
+#define TL_WA830REV2_GPIO_SW_RFKILL	16	/* WPS for MR3420 v2 */
+
+#define TL_WA830REV2_GPIO_USB_POWER	4
+
+#define TL_WA830REV2_KEYS_POLL_INTERVAL	20	/* msecs */
+#define TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA830REV2_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa830re_v2_part_probes[] = {
+	"tp-link",
+	NULL,
+};
+
+static struct flash_platform_data tl_wa830re_v2_flash_data = {
+	.part_probes	= tl_wa830re_v2_part_probes,
+};
+
+static struct gpio_led tl_wa830re_v2_leds_gpio[] __initdata = {
+	{
+		.name		= "tp-link:green:qss",
+		.gpio		= TL_WA830REV2_GPIO_LED_QSS,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:system",
+		.gpio		= TL_WA830REV2_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:lan",
+		.gpio		= TL_WA830REV2_GPIO_LED_LAN,
+		.active_low	= 1,
+	}, {
+		.name		= "tp-link:green:wlan",
+		.gpio		= TL_WA830REV2_GPIO_LED_WLAN,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button tl_wa830re_v2_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_WA830REV2_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "RFKILL switch",
+		.type		= EV_SW,
+		.code		= KEY_RFKILL,
+		.debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_WA830REV2_GPIO_SW_RFKILL,
+		.active_low	= 0,
+	}
+};
+
+static void __init tl_ap123_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	/* Disable JTAG, enabling GPIOs 0-3 */
+	/* Configure OBS4 line, for GPIO 4*/
+	ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+				 AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+	/* config gpio4 as normal gpio function */
+	ath79_gpio_output_select(TL_WA830REV2_GPIO_USB_POWER,
+				 AR934X_GPIO_OUT_GPIO);
+
+	ath79_register_m25p80(&tl_wa830re_v2_flash_data);
+
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+
+	ath79_register_mdio(1, 0x0);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+	/* GMAC0 is connected to the PHY0 of the internal switch */
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_switch_data.phy_poll_mask = BIT(0);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.phy_mask = BIT(0);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+	ath79_register_eth(0);
+
+	ath79_register_wmac(ee, mac);
+}
+
+static void __init tl_wa830re_v2_setup(void)
+{
+	tl_ap123_setup();
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa830re_v2_leds_gpio) - 1,
+				 tl_wa830re_v2_leds_gpio);
+
+	ath79_register_gpio_keys_polled(1, TL_WA830REV2_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wa830re_v2_gpio_keys),
+					tl_wa830re_v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA830RE_V2, "TL-WA830RE-v2", "TP-LINK TL-WA830RE v2",
+	     tl_wa830re_v2_setup);