aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx/base-files')
-rwxr-xr-x[-rw-r--r--]target/linux/ar71xx/base-files/etc/board.d/01_leds (renamed from target/linux/ar71xx/base-files/etc/uci-defaults/01_leds)10
-rwxr-xr-x[-rw-r--r--]target/linux/ar71xx/base-files/etc/board.d/02_network (renamed from target/linux/ar71xx/base-files/etc/uci-defaults/02_network)209
2 files changed, 117 insertions, 102 deletions
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 816ca42d69..892b56738d 100644..100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -3,9 +3,11 @@
# Copyright (C) 2011 OpenWrt.org
#
-. /lib/functions/uci-defaults.sh
+. /lib/functions/uci-defaults-new.sh
. /lib/ar71xx.sh
+board_config_update
+
board=$(ar71xx_board_name)
case "$board" in
@@ -211,8 +213,8 @@ dlan-pro-500-wp)
dlan-pro-1200-ac)
ucidef_set_led_wlan "wlan" "WLAN" "devolo:status:wlan" "phy0radio"
- ucidef_set_led_trigger_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
- ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
+ ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
+ ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
;;
gl-ar150)
@@ -667,6 +669,6 @@ zcn-1523h-5)
;;
esac
-ucidef_commit_leds
+board_config_flush
exit 0
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 88071146a7..72156b25cf 100644..100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -1,19 +1,18 @@
#!/bin/sh
#
-# Copyright (C) 2011 OpenWrt.org
+# Copyright (C) 2011-2015 OpenWrt.org
#
-[ -e /etc/config/network ] && exit 0
-
-touch /etc/config/network
-
-. /lib/functions/uci-defaults.sh
+. /lib/functions/uci-defaults-new.sh
. /lib/ar71xx.sh
+board_config_update
+
ucidef_set_interface_loopback
board=$(ar71xx_board_name)
+
case "$board" in
all0315n |\
all0258n |\
@@ -27,30 +26,24 @@ ap132 |\
wlr8100)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
esr1750 |\
epg5000)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
- ;;
-
-ap136-010)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "5 6"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
+ap136-010 |\
ap147-010)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "5 6"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
;;
ap136-020 |\
@@ -59,8 +52,8 @@ tl-wr1043nd-v2 |\
wzr-450hp2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "5 6"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
;;
archer-c5 |\
@@ -68,29 +61,30 @@ archer-c7 |\
tl-wdr4900-v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "1 6"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
bsb)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth1" "1:lan" "3:lan" # XXX: confirm cpu port!
ucidef_set_interface_wlan
;;
cpe510)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 4"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "5:lan" "4:wan"
;;
airgatewaypro)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "4:lan" "5:wan"
;;
db120 |\
@@ -101,45 +95,53 @@ rb-2011uas-2hnd|\
rb-2011uias-2hnd)
ucidef_set_interfaces_lan_wan "eth0.1 eth1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
- ucidef_add_switch "switch1" "1" "1"
- ucidef_add_switch_vlan "switch1" "1" "0 1 2 3 4 5"
case "$board" in
rb-2011uas* | rb-2011uias | rb-2011uias-2hnd)
- ucidef_set_interface_raw "sfp" "eth0.3"
- ucidef_add_switch_vlan "switch0" "3" "0t 6"
- ;;
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp"
+ ;;
+ *)
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+ ;;
esac
+
+ ucidef_add_switch "switch1" "1" "1"
+ ucidef_add_switch_ports "switch1" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
;;
dir-825-b1|\
tew-673gru)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+ ucidef_add_switch_ports "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
f9k1115v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6"
- ucidef_add_switch_vlan "switch0" "2" "0 1"
+ ucidef_add_switch_ports "switch0" \
+ "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" \
+ "0@eth0" "1:wan" # XXX: confirm cpu ports!
;;
nbg460n_550n_550nh)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "0" "0 1 2 3 5"
+ ucidef_add_switch_ports "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
nbg6616 |\
nbg6716)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "5 6"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" \
+ "5:wan" "6@eth1"
;;
ap143 |\
@@ -147,26 +149,30 @@ rb-433 |\
rb-433u)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "1 2 5"
+ ucidef_add_switch_ports "switch0" \
+ "1:lan" "2:lan" "5@eth1"
;;
rb-435g)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth1" "1:lan" "2:lan" # XXX: confirm!
;;
rb-450)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5"
+ ucidef_add_switch_ports "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth1"
;;
rb-450g |\
routerstation-pro)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
;;
ap136 |\
@@ -176,8 +182,8 @@ rb-951g-2hnd |\
wzr-hp-g450h)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
rb-951ui-2hnd)
@@ -187,10 +193,11 @@ rb-951ui-2hnd)
rb-493g)
ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
ucidef_add_switch "switch1" "1" "1"
- ucidef_add_switch_vlan "switch1" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch1" "2" "0t 5"
+ ucidef_add_switch_ports "switch1" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
wzr-hp-g300nh2 |\
@@ -198,36 +205,37 @@ pb92 |\
ap113)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 2"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
;;
el-m150)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+ ucidef_add_switch_ports "switch0" \
+ "0:lan" "1:lan" "3@eth1" # XXX: confirm!
;;
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
tl-wr1043nd)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
- ucidef_add_switch_vlan "switch0" "2" "0 5t"
+ ucidef_add_switch_ports "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
;;
tl-wr2543n)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
- ucidef_add_switch_vlan "switch0" "2" "0 9t"
+ ucidef_add_switch_ports "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
tl-wr841n-v1|\
@@ -252,33 +260,36 @@ wnr612-v2 |\
wnr1000-v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ucidef_add_switch_ports "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth1" # XXX: confirm!
;;
uap-pro)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1"
- ucidef_add_switch_vlan "switch0" "2" "0t 2"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:wan"
;;
nanostation-m-xw)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "5:lan" "1:wan"
;;
wrt160nl)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 5"
+ ucidef_add_switch_ports "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0"
;;
wzr-hp-g300nh)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+ ucidef_add_switch_ports "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
dgl-5500-a1 |\
@@ -286,8 +297,8 @@ dir-825-c1)
local mac
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
mac=$(mtd_get_mac_ascii nvram "wan_mac")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
@@ -296,8 +307,8 @@ mynet-n750)
local mac
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
mac=$(mtd_get_mac_ascii devdata "wanmac")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
@@ -312,8 +323,8 @@ wndr3700v4 | \
wndr4300)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
mac_lan=$(mtd_get_mac_binary caldata 0)
[ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan"
mac_wan=$(mtd_get_mac_binary caldata 6)
@@ -324,8 +335,8 @@ esr900)
local mac
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
@@ -338,7 +349,8 @@ dlan-pro-500-wp)
dlan-pro-1200-ac)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "switch0" "1" "0"
- ucidef_add_switch_vlan "switch0" "0" "0 2 3 4"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan"
;;
all0305 |\
@@ -413,14 +425,15 @@ wpe72)
gl-ar300)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
wpj344)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 3"
- ucidef_add_switch_vlan "switch0" "2" "0t 2"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "3:lan" "2:wan"
;;
wpj531)
@@ -430,8 +443,8 @@ wpj531)
wpj558)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "5 6t"
- ucidef_add_switch_vlan "switch0" "2" "1 6t"
+ ucidef_add_switch_ports "switch0" \
+ "5:lan" "1:wan" "6@eth0"
;;
ap121 |\
@@ -469,37 +482,39 @@ whr-hp-gn |\
wzr-hp-ag300h)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
wzr-hp-g450h)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
;;
ew-dorin)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2"
- ucidef_add_switch_vlan "switch0" "2" "0t 3"
+ ucidef_add_switch_ports "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:wan"
;;
ew-dorin-router)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 2 3"
+ ucidef_add_switch_ports "switch0" "0@eth0" "2:lan" "3:lan"
;;
wndr3700)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+ ucidef_add_switch_ports "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
- uci set network.@switch[-1].blinkrate='2'
+ ucidef_add_switch_attr "switch0" "blinkrate" 2
- ucidef_add_switch_port "switch0" "1"
# Port 1 controls the GREEN configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
@@ -509,18 +524,16 @@ wndr3700)
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
# 14: Link (master); 15: separate register
- uci set network.@switch_port[-1].led='6'
+ ucidef_add_switch_port_attr "switch0" 1 led 6
- ucidef_add_switch_port "switch0" "2"
# Port 2 controls the ORANGE configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
- uci set network.@switch_port[-1].led='9'
+ ucidef_add_switch_port_attr "switch0" 2 led 9
- ucidef_add_switch_port "switch0" "5"
# Port 5 controls the configuration of the WAN LED and the
# section does not correspond to a real switch port.
#
@@ -529,7 +542,7 @@ wndr3700)
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
- uci set network.@switch_port[-1].led='2'
+ ucidef_add_switch_port_attr "switch0" 5 led 2
;;
*)
@@ -537,6 +550,6 @@ wndr3700)
;;
esac
-uci commit network
+board_config_flush
exit 0
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 17:29:22 +0000