aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch')
-rw-r--r--target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch1026
1 files changed, 0 insertions, 1026 deletions
diff --git a/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
deleted file mode 100644
index b85f62e680..0000000000
--- a/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
+++ /dev/null
@@ -1,1026 +0,0 @@
-Subject: [PATCH v2 1/5] usb: xhci: add firmware loader for uPD720201 and uPD720202 w/o ROM
-Date: Fri, 21 Jun 2019 14:29:09 +0530
-Message-Id: <20190621085913.8722-2-vkoul@kernel.org>
-From: Christian Lamparter <chunkeey@googlemail.com>
-
-This patch adds a firmware loader for the uPD720201K8-711-BAC-A
-and uPD720202K8-711-BAA-A variant. Both of these chips are listed
-in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
-devices which need the firmware loader on page 2 in order to
-work as they "do not support the External ROM".
-
-The "Firmware Download Sequence" is describe in chapter
-"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
-
-The firmware "K2013080.mem" is available from a USB3.0 Host to
-PCIe Adapter (PP2U-E card) "Firmware download" archive. An
-alternative version can be sourced from Netgear's WNDR4700 GPL
-archives.
-
-The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
-(2012-06-15) state that the firmware is for the following devices:
- - uPD720201 ES 2.0 sample whose revision ID is 2.
- - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-
-Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-[vkoul: fixed comments:
- used macros for timeout count and delay
- removed renesas_fw_alive_check
- cleaned renesas_fw_callback
- removed recurion for renesas_fw_download
- added MODULE_FIRMWARE]
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- drivers/usb/host/xhci-pci.c | 458 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 458 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -12,6 +12,8 @@
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/acpi.h>
-+#include <linux/firmware.h>
-+#include <linux/unaligned/access_ok.h>
-
- #include "xhci.h"
- #include "xhci-trace.h"
-@@ -72,6 +74,44 @@
- #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142
- #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242
-
-+#define RENESAS_FW_VERSION 0x6C
-+#define RENESAS_ROM_CONFIG 0xF0
-+#define RENESAS_FW_STATUS 0xF4
-+#define RENESAS_FW_STATUS_MSB 0xF5
-+#define RENESAS_ROM_STATUS 0xF6
-+#define RENESAS_ROM_STATUS_MSB 0xF7
-+#define RENESAS_DATA0 0xF8
-+#define RENESAS_DATA1 0xFC
-+
-+#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7)
-+#define RENESAS_FW_VERSION_OFFSET 8
-+
-+#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0)
-+#define RENESAS_FW_STATUS_LOCK BIT(1)
-+#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4)
-+ #define RENESAS_FW_STATUS_INVALID 0
-+ #define RENESAS_FW_STATUS_SUCCESS BIT(4)
-+ #define RENESAS_FW_STATUS_ERROR BIT(5)
-+#define RENESAS_FW_STATUS_SET_DATA0 BIT(8)
-+#define RENESAS_FW_STATUS_SET_DATA1 BIT(9)
-+
-+#define RENESAS_ROM_STATUS_ACCESS BIT(0)
-+#define RENESAS_ROM_STATUS_ERASE BIT(1)
-+#define RENESAS_ROM_STATUS_RELOAD BIT(2)
-+#define RENESAS_ROM_STATUS_RESULT GENMASK(6, 4)
-+ #define RENESAS_ROM_STATUS_INVALID 0
-+ #define RENESAS_ROM_STATUS_SUCCESS BIT(4)
-+ #define RENESAS_ROM_STATUS_ERROR BIT(5)
-+#define RENESAS_ROM_STATUS_SET_DATA0 BIT(8)
-+#define RENESAS_ROM_STATUS_SET_DATA1 BIT(9)
-+#define RENESAS_ROM_STATUS_ROM_EXISTS BIT(15)
-+
-+#define RENESAS_ROM_ERASE_MAGIC 0x5A65726F
-+#define RENESAS_ROM_WRITE_MAGIC 0x53524F4D
-+
-+#define RENESAS_RETRY 1000
-+#define RENESAS_DELAY 10
-+
- static const char hcd_name[] = "xhci_hcd";
-
- static struct hc_driver __read_mostly xhci_pci_hc_driver;
-@@ -327,6 +367,873 @@ static void xhci_pme_acpi_rtd3_enable(st
- static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
- #endif /* CONFIG_ACPI */
-
-+static const struct renesas_fw_entry {
-+ const char *firmware_name;
-+ u16 device;
-+ u8 revision;
-+ u16 expected_version;
-+} renesas_fw_table[] = {
-+ /*
-+ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
-+ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
-+ * need the software loader.
-+ *
-+ * PP2U/ReleaseNote_USB3-201-202-FW.txt:
-+ *
-+ * Note: This firmware is for the following devices.
-+ * - uPD720201 ES 2.0 sample whose revision ID is 2.
-+ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
-+ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-+ *
-+ * Entry expected_version should be kept in increasing order for a
-+ * chip, so that driver will pick first version and if that fails
-+ * then next one will be picked
-+ */
-+ { "K2013080.mem", 0x0014, 0x02, 0x2013 },
-+ { "K2013080.mem", 0x0014, 0x03, 0x2013 },
-+ { "K2026090.mem", 0x0014, 0x03, 0x2026 },
-+ { "K2013080.mem", 0x0015, 0x02, 0x2013 },
-+ { "K2026090.mem", 0x0015, 0x02, 0x2026 },
-+};
-+
-+MODULE_FIRMWARE("K2013080.mem");
-+MODULE_FIRMWARE("K2026090.mem");
-+
-+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
-+{
-+ const struct renesas_fw_entry *entry;
-+ size_t i;
-+
-+ /* This loader will only work with a RENESAS device. */
-+ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
-+ return NULL;
-+
-+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
-+ entry = &renesas_fw_table[i];
-+ if (entry->device == dev->device &&
-+ entry->revision == dev->revision)
-+ return entry;
-+ }
-+
-+ return NULL;
-+}
-+
-+static const struct
-+renesas_fw_entry *renesas_get_next_entry(struct pci_dev *dev,
-+ const struct renesas_fw_entry *entry)
-+{
-+ const struct renesas_fw_entry *next_entry;
-+ size_t i;
-+
-+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
-+ next_entry = &renesas_fw_table[i];
-+ if (next_entry->device == dev->device &&
-+ next_entry->revision == dev->revision &&
-+ next_entry->expected_version > entry->expected_version)
-+ return next_entry;
-+ }
-+
-+ return NULL;
-+}
-+
-+static int renesas_fw_download_image(struct pci_dev *dev,
-+ const u32 *fw,
-+ size_t step)
-+{
-+ size_t i;
-+ int err;
-+ u8 fw_status;
-+ bool data0_or_data1;
-+
-+ /*
-+ * The hardware does alternate between two 32-bit pages.
-+ * (This is because each row of the firmware is 8 bytes).
-+ *
-+ * for even steps we use DATA0, for odd steps DATA1.
-+ */
-+ data0_or_data1 = (step & 1) == 1;
-+
-+ /* step+1. Read "Set DATAX" and confirm it is cleared. */
-+ for (i = 0; i < RENESAS_RETRY; i++) {
-+ err = pci_read_config_byte(dev, RENESAS_FW_STATUS_MSB,
-+ &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (!(fw_status & BIT(data0_or_data1)))
-+ break;
-+
-+ udelay(RENESAS_DELAY);
-+ }
-+ if (i == RENESAS_RETRY)
-+ return -ETIMEDOUT;
-+
-+ /*
-+ * step+2. Write FW data to "DATAX".
-+ * "LSB is left" => force little endian
-+ */
-+ err = pci_write_config_dword(dev, data0_or_data1 ?
-+ RENESAS_DATA1 : RENESAS_DATA0,
-+ (__force u32)cpu_to_le32(fw[step]));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ udelay(100);
-+
-+ /* step+3. Set "Set DATAX". */
-+ err = pci_write_config_byte(dev, RENESAS_FW_STATUS_MSB,
-+ BIT(data0_or_data1));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ return 0;
-+}
-+
-+static int renesas_fw_verify(struct pci_dev *dev,
-+ const void *fw_data,
-+ size_t length)
-+{
-+ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
-+ u16 fw_version_pointer;
-+ u16 fw_version;
-+
-+ if (!entry)
-+ return -EINVAL;
-+
-+ /*
-+ * The Firmware's Data Format is describe in
-+ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
-+ */
-+
-+ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
-+ if (length % 8 != 0)
-+ dev_warn(&dev->dev, "firmware size is not a multiple of 8.");
-+
-+ /*
-+ * The bootrom chips of the big brother have sizes up to 64k, let's
-+ * assume that's the biggest the firmware can get.
-+ */
-+ if (length < 0x1000 || length >= 0x10000) {
-+ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
-+ length);
-+ return -EINVAL;
-+ }
-+
-+ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
-+ if (get_unaligned_le16(fw_data) != 0x55aa) {
-+ dev_err(&dev->dev, "no valid firmware header found.");
-+ return -EINVAL;
-+ }
-+
-+ /* verify the firmware version position and print it. */
-+ fw_version_pointer = get_unaligned_le16(fw_data + 4);
-+ if (fw_version_pointer + 2 >= length) {
-+ dev_err(&dev->dev,
-+ "firmware version pointer is outside of the firmware image.");
-+ return -EINVAL;
-+ }
-+
-+ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
-+ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
-+
-+ if (fw_version != entry->expected_version) {
-+ dev_err(&dev->dev,
-+ "firmware version mismatch, expected version: %02x.",
-+ entry->expected_version);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int renesas_check_rom_state(struct pci_dev *pdev)
-+{
-+ const struct renesas_fw_entry *entry;
-+ u16 rom_state;
-+ u32 version;
-+ bool valid_version = false;
-+ int err, i;
-+
-+ /* check FW version */
-+ err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ version &= RENESAS_FW_VERSION_FIELD;
-+ version = version >> RENESAS_FW_VERSION_OFFSET;
-+ dev_dbg(&pdev->dev, "Found FW version loaded is %x\n", version);
-+
-+ /* treat version in renesas_fw_table as correct ones */
-+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
-+ entry = &renesas_fw_table[i];
-+ if (version == entry->expected_version) {
-+ dev_dbg(&pdev->dev, "Detected valid ROM version..\n");
-+ valid_version = true;
-+ }
-+ }
-+
-+ /*
-+ * Test if ROM is present and loaded, if so we can skip everything
-+ */
-+ err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ if (rom_state & BIT(15)) {
-+ /* ROM exists */
-+ dev_dbg(&pdev->dev, "ROM exists\n");
-+
-+ /* Check the "Result Code" Bits (6:4) and act accordingly */
-+ switch (rom_state & RENESAS_ROM_STATUS_RESULT) {
-+ case RENESAS_ROM_STATUS_SUCCESS:
-+ dev_dbg(&pdev->dev, "Success ROM load...");
-+ /* we have valid version and status so success */
-+ if (valid_version)
-+ return 0;
-+ break;
-+
-+ case RENESAS_ROM_STATUS_INVALID: /* No result yet */
-+ dev_dbg(&pdev->dev, "No result as it is ROM...");
-+ /* we have valid version and status so success */
-+ if (valid_version)
-+ return 0;
-+ break;
-+
-+ case RENESAS_ROM_STATUS_ERROR: /* Error State */
-+ default: /* All other states are marked as "Reserved states" */
-+ dev_err(&pdev->dev, "Invalid ROM..");
-+ break;
-+ }
-+ }
-+
-+ return -EIO;
-+}
-+
-+static int renesas_fw_check_running(struct pci_dev *pdev)
-+{
-+ int err;
-+ u8 fw_state;
-+
-+ /* Check if device has ROM and loaded, if so skip everything */
-+ err = renesas_check_rom_state(pdev);
-+ if (!err)
-+ return err;
-+
-+ /*
-+ * Test if the device is actually needing the firmware. As most
-+ * BIOSes will initialize the device for us. If the device is
-+ * initialized.
-+ */
-+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /*
-+ * Check if "FW Download Lock" is locked. If it is and the FW is
-+ * ready we can simply continue. If the FW is not ready, we have
-+ * to give up.
-+ */
-+ if (fw_state & RENESAS_FW_STATUS_LOCK) {
-+ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
-+
-+ if (fw_state & RENESAS_FW_STATUS_SUCCESS)
-+ return 0;
-+
-+ dev_err(&pdev->dev,
-+ "FW Download Lock is set and FW is not ready. Giving Up.");
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Check if "FW Download Enable" is set. If someone (us?) tampered
-+ * with it and it can't be resetted, we have to give up too... and
-+ * ask for a forgiveness and a reboot.
-+ */
-+ if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
-+ dev_err(&pdev->dev,
-+ "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
-+ return -EIO;
-+ }
-+
-+ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
-+ switch (fw_state & RENESAS_FW_STATUS_RESULT) {
-+ case 0: /* No result yet */
-+ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
-+
-+ /* tell the caller, that this device needs the firmware. */
-+ return 1;
-+
-+ case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
-+ dev_dbg(&pdev->dev, "FW is ready.");
-+ return 0;
-+
-+ case RENESAS_FW_STATUS_ERROR: /* Error State */
-+ dev_err(&pdev->dev,
-+ "hardware is in an error state. Giving up (poweroff/reboot needed).");
-+ return -ENODEV;
-+
-+ default: /* All other states are marked as "Reserved states" */
-+ dev_err(&pdev->dev,
-+ "hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
-+ (fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
-+ return -EINVAL;
-+ }
-+}
-+
-+static int renesas_fw_download(struct pci_dev *pdev,
-+ const struct firmware *fw)
-+{
-+ const u32 *fw_data = (const u32 *)fw->data;
-+ size_t i;
-+ int err;
-+ u8 fw_status;
-+
-+ /*
-+ * For more information and the big picture: please look at the
-+ * "Firmware Download Sequence" in "7.1 FW Download Interface"
-+ * of R19UH0078EJ0500 Rev.5.00 page 131
-+ */
-+
-+ /*
-+ * 0. Set "FW Download Enable" bit in the
-+ * "FW Download Control & Status Register" at 0xF4
-+ */
-+ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
-+ RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* 1 - 10 follow one step after the other. */
-+ for (i = 0; i < fw->size / 4; i++) {
-+ err = renesas_fw_download_image(pdev, fw_data, i);
-+ if (err) {
-+ dev_err(&pdev->dev,
-+ "Firmware Download Step %zd failed at position %zd bytes with (%d).",
-+ i, i * 4, err);
-+ return err;
-+ }
-+ }
-+
-+ /*
-+ * This sequence continues until the last data is written to
-+ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
-+ * is cleared by the hardware beforehand.
-+ */
-+ for (i = 0; i < RENESAS_RETRY; i++) {
-+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
-+ &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (!(fw_status & (BIT(0) | BIT(1))))
-+ break;
-+
-+ udelay(RENESAS_DELAY);
-+ }
-+ if (i == RENESAS_RETRY)
-+ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
-+
-+ /*
-+ * 11. After finishing writing the last data of FW, the
-+ * System Software must clear "FW Download Enable"
-+ */
-+ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* 12. Read "Result Code" and confirm it is good. */
-+ for (i = 0; i < RENESAS_RETRY; i++) {
-+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (fw_status & RENESAS_FW_STATUS_SUCCESS)
-+ break;
-+
-+ udelay(RENESAS_DELAY);
-+ }
-+ if (i == RENESAS_RETRY) {
-+ /* Timed out / Error - let's see if we can fix this */
-+ err = renesas_fw_check_running(pdev);
-+ switch (err) {
-+ case 0: /*
-+ * we shouldn't end up here.
-+ * maybe it took a little bit longer.
-+ * But all should be well?
-+ */
-+ break;
-+
-+ case 1: /* (No result yet! */
-+ return -ETIMEDOUT;
-+
-+ default:
-+ return err;
-+ }
-+ }
-+ /*
-+ * Optional last step: Engage Firmware Lock
-+ *
-+ * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
-+ * if (err)
-+ * return pcibios_err_to_errno(err);
-+ */
-+
-+ return 0;
-+}
-+
-+struct renesas_fw_ctx {
-+ struct pci_dev *pdev;
-+ const struct pci_device_id *id;
-+ bool resume;
-+ const struct renesas_fw_entry *entry;
-+};
-+
-+static int xhci_pci_probe(struct pci_dev *pdev,
-+ const struct pci_device_id *id);
-+
-+static bool renesas_check_rom(struct pci_dev *pdev)
-+{
-+ u16 rom_status;
-+ int retval;
-+
-+ /* 1. Check if external ROM exists */
-+ retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status);
-+ if (retval)
-+ return false;
-+
-+ rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS;
-+ if (rom_status) {
-+ dev_dbg(&pdev->dev, "External ROM exists\n");
-+ return true; /* External ROM exists */
-+ }
-+
-+ return false;
-+}
-+
-+static void renesas_rom_erase(struct pci_dev *pdev)
-+{
-+ int retval, i;
-+ u8 status;
-+
-+ dev_dbg(&pdev->dev, "Performing ROM Erase...\n");
-+ retval = pci_write_config_dword(pdev, RENESAS_DATA0,
-+ RENESAS_ROM_ERASE_MAGIC);
-+ if (retval) {
-+ dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n",
-+ pcibios_err_to_errno(retval));
-+ return;
-+ }
-+
-+ retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
-+ if (retval) {
-+ dev_err(&pdev->dev, "ROM status read failed: %d\n",
-+ pcibios_err_to_errno(retval));
-+ return;
-+ }
-+ status |= RENESAS_ROM_STATUS_ERASE;
-+ retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status);
-+ if (retval) {
-+ dev_err(&pdev->dev, "ROM erase set word write failed\n");
-+ return;
-+ }
-+
-+ /* sleep a bit while ROM is erased */
-+ msleep(20);
-+
-+ for (i = 0; i < RENESAS_RETRY; i++) {
-+ retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS,
-+ &status);
-+ status &= RENESAS_ROM_STATUS_ERASE;
-+ if (!status)
-+ break;
-+
-+ mdelay(RENESAS_DELAY);
-+ }
-+
-+ if (i == RENESAS_RETRY)
-+ dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status);
-+
-+ dev_dbg(&pdev->dev, "ROM Erase... Done success\n");
-+}
-+
-+static bool renesas_download_rom(struct pci_dev *pdev,
-+ const u32 *fw, size_t step)
-+{
-+ bool data0_or_data1;
-+ u8 fw_status;
-+ size_t i;
-+ int err;
-+
-+ /*
-+ * The hardware does alternate between two 32-bit pages.
-+ * (This is because each row of the firmware is 8 bytes).
-+ *
-+ * for even steps we use DATA0, for odd steps DATA1.
-+ */
-+ data0_or_data1 = (step & 1) == 1;
-+
-+ /* Read "Set DATAX" and confirm it is cleared. */
-+ for (i = 0; i < RENESAS_RETRY; i++) {
-+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
-+ &fw_status);
-+ if (err) {
-+ dev_err(&pdev->dev, "Read ROM Status failed: %d\n",
-+ pcibios_err_to_errno(err));
-+ return false;
-+ }
-+ if (!(fw_status & BIT(data0_or_data1)))
-+ break;
-+
-+ udelay(RENESAS_DELAY);
-+ }
-+ if (i == RENESAS_RETRY) {
-+ dev_err(&pdev->dev, "Timeout for Set DATAX step: %zd\n", step);
-+ return false;
-+ }
-+
-+ /*
-+ * Write FW data to "DATAX".
-+ * "LSB is left" => force little endian
-+ */
-+ err = pci_write_config_dword(pdev, data0_or_data1 ?
-+ RENESAS_DATA1 : RENESAS_DATA0,
-+ (__force u32)cpu_to_le32(fw[step]));
-+ if (err) {
-+ dev_err(&pdev->dev, "Write to DATAX failed: %d\n",
-+ pcibios_err_to_errno(err));
-+ return false;
-+ }
-+
-+ udelay(100);
-+
-+ /* Set "Set DATAX". */
-+ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
-+ BIT(data0_or_data1));
-+ if (err) {
-+ dev_err(&pdev->dev, "Write config for DATAX failed: %d\n",
-+ pcibios_err_to_errno(err));
-+ return false;
-+ }
-+
-+ return true;
-+}
-+
-+static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw)
-+{
-+ const u32 *fw_data = (const u32 *)fw->data;
-+ int err, i;
-+ u8 status;
-+
-+ /* 2. Write magic word to Data0 */
-+ err = pci_write_config_dword(pdev, RENESAS_DATA0,
-+ RENESAS_ROM_WRITE_MAGIC);
-+ if (err)
-+ return false;
-+
-+ /* 3. Set External ROM access */
-+ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
-+ RENESAS_ROM_STATUS_ACCESS);
-+ if (err)
-+ goto remove_bypass;
-+
-+ /* 4. Check the result */
-+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
-+ if (err)
-+ goto remove_bypass;
-+ status &= GENMASK(6, 4);
-+ if (status) {
-+ dev_err(&pdev->dev,
-+ "setting external rom failed: %x\n", status);
-+ goto remove_bypass;
-+ }
-+
-+ /* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */
-+ for (i = 0; i < fw->size / 4; i++) {
-+ err = renesas_download_rom(pdev, fw_data, i);
-+ if (!err) {
-+ dev_err(&pdev->dev,
-+ "ROM Download Step %d failed at position %d bytes\n",
-+ i, i * 4);
-+ goto remove_bypass;
-+ }
-+ }
-+
-+ /*
-+ * wait till DATA0/1 is cleared
-+ */
-+ for (i = 0; i < RENESAS_RETRY; i++) {
-+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
-+ &status);
-+ if (err)
-+ goto remove_bypass;
-+ if (!(status & (BIT(0) | BIT(1))))
-+ break;
-+
-+ udelay(RENESAS_DELAY);
-+ }
-+ if (i == RENESAS_RETRY) {
-+ dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n");
-+ goto remove_bypass;
-+ }
-+
-+ /* 17. Remove bypass */
-+ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
-+ if (err)
-+ return false;
-+
-+ udelay(10);
-+
-+ /* 18. check result */
-+ for (i = 0; i < RENESAS_RETRY; i++) {
-+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
-+ if (err) {
-+ dev_err(&pdev->dev, "Read ROM status failed:%d\n",
-+ pcibios_err_to_errno(err));
-+ return false;
-+ }
-+ status &= RENESAS_ROM_STATUS_RESULT;
-+ if (status == RENESAS_ROM_STATUS_SUCCESS) {
-+ dev_dbg(&pdev->dev, "Download ROM success\n");
-+ break;
-+ }
-+ udelay(RENESAS_DELAY);
-+ }
-+ if (i == RENESAS_RETRY) { /* Timed out */
-+ dev_err(&pdev->dev,
-+ "Download to external ROM TO: %x\n", status);
-+ return false;
-+ }
-+
-+ dev_dbg(&pdev->dev, "Download to external ROM scuceeded\n");
-+
-+ /* Last step set Reload */
-+ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
-+ RENESAS_ROM_STATUS_RELOAD);
-+ if (err) {
-+ dev_err(&pdev->dev, "Set ROM execute failed: %d\n",
-+ pcibios_err_to_errno(err));
-+ return false;
-+ }
-+
-+ /*
-+ * wait till Reload is cleared
-+ */
-+ for (i = 0; i < RENESAS_RETRY; i++) {
-+ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
-+ if (err)
-+ return false;
-+ if (!(status & RENESAS_ROM_STATUS_RELOAD))
-+ break;
-+
-+ udelay(RENESAS_DELAY);
-+ }
-+ if (i == RENESAS_RETRY) {
-+ dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status);
-+ return false;
-+ }
-+
-+ return true;
-+
-+remove_bypass:
-+ pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
-+ return false;
-+}
-+
-+static void renesas_fw_callback(const struct firmware *fw,
-+ void *context)
-+{
-+ struct renesas_fw_ctx *ctx = context;
-+ struct pci_dev *pdev = ctx->pdev;
-+ struct device *parent = pdev->dev.parent;
-+ const struct renesas_fw_entry *next_entry;
-+ bool rom;
-+ int err;
-+
-+ if (!fw) {
-+ dev_err(&pdev->dev, "firmware failed to load\n");
-+ /*
-+ * we didn't find firmware, check if we have another
-+ * entry for this device
-+ */
-+ next_entry = renesas_get_next_entry(ctx->pdev, ctx->entry);
-+ if (next_entry) {
-+ ctx->entry = next_entry;
-+ dev_dbg(&pdev->dev, "Found next entry, requesting: %s\n",
-+ next_entry->firmware_name);
-+ request_firmware_nowait(THIS_MODULE, 1,
-+ next_entry->firmware_name,
-+ &pdev->dev, GFP_KERNEL,
-+ ctx, renesas_fw_callback);
-+ return;
-+ } else {
-+ goto cleanup;
-+ }
-+ }
-+
-+ err = renesas_fw_verify(pdev, fw->data, fw->size);
-+ if (err)
-+ goto cleanup;
-+
-+ /* Check if the device has external ROM */
-+ rom = renesas_check_rom(pdev);
-+ if (rom) {
-+ /* perfrom chip erase first */
-+ renesas_rom_erase(pdev);
-+
-+ /* lets try loading fw on ROM first */
-+ rom = renesas_setup_rom(pdev, fw);
-+ if (!rom) {
-+ dev_err(&pdev->dev,
-+ "ROM load failed, falling back on FW load\n");
-+ } else {
-+ dev_dbg(&pdev->dev, "ROM load done..\n");
-+
-+ release_firmware(fw);
-+ goto do_probe;
-+ }
-+ }
-+
-+ err = renesas_fw_download(pdev, fw);
-+ release_firmware(fw);
-+ if (err) {
-+ dev_err(&pdev->dev, "firmware failed to download (%d).", err);
-+ goto cleanup;
-+ }
-+
-+do_probe:
-+ if (ctx->resume)
-+ return;
-+
-+ err = xhci_pci_probe(pdev, ctx->id);
-+ if (!err) {
-+ /* everything worked */
-+ devm_kfree(&pdev->dev, ctx);
-+ return;
-+ }
-+
-+cleanup:
-+ /* in case of an error - fall through */
-+ dev_info(&pdev->dev, "Unloading driver");
-+
-+ if (parent)
-+ device_lock(parent);
-+
-+ device_release_driver(&pdev->dev);
-+
-+ if (parent)
-+ device_unlock(parent);
-+
-+ pci_dev_put(pdev);
-+}
-+
-+static int renesas_fw_alive_check(struct pci_dev *pdev)
-+{
-+ const struct renesas_fw_entry *entry;
-+
-+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+ entry = renesas_needs_fw_dl(pdev);
-+ if (!entry)
-+ return 0;
-+
-+ return renesas_fw_check_running(pdev);
-+}
-+
-+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
-+ const struct pci_device_id *id,
-+ bool do_resume)
-+{
-+ const struct renesas_fw_entry *entry;
-+ struct renesas_fw_ctx *ctx;
-+ int err;
-+
-+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+ entry = renesas_needs_fw_dl(pdev);
-+ if (!entry)
-+ return 0;
-+
-+ err = renesas_fw_check_running(pdev);
-+ /* Continue ahead, if the firmware is already running. */
-+ if (err == 0)
-+ return 0;
-+
-+ if (err != 1)
-+ return err;
-+
-+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
-+ if (!ctx)
-+ return -ENOMEM;
-+ ctx->pdev = pdev;
-+ ctx->resume = do_resume;
-+ ctx->id = id;
-+ ctx->entry = entry;
-+
-+ pci_dev_get(pdev);
-+ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
-+ &pdev->dev, GFP_KERNEL,
-+ ctx, renesas_fw_callback);
-+ if (err) {
-+ pci_dev_put(pdev);
-+ return err;
-+ }
-+
-+ /*
-+ * The renesas_fw_callback() callback will continue the probe
-+ * process, once it aquires the firmware.
-+ */
-+ return 1;
-+}
-+
-+static int renesas_check_if_fw_dl_is_needed(struct pci_dev *pdev)
-+{
-+ int err;
-+ u8 fw_state;
-+
-+ /*
-+ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
-+ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
-+ * need a firmware in order to work.
-+ *
-+ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-+ * - uPD720201 ES 2.0 sample whose revision ID is 2.
-+ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
-+ */
-+ if (!((pdev->vendor == PCI_VENDOR_ID_RENESAS) &&
-+ ((pdev->device == 0x0015 && pdev->revision == 0x02) ||
-+ (pdev->device == 0x0014 &&
-+ (pdev->revision == 0x02 || pdev->revision == 0x03)))))
-+ return 0;
-+
-+ /* Check if device has ROM and loaded, if so skip everything */
-+ err = renesas_check_rom_state(pdev);
-+ if (!err)
-+ return err;
-+
-+ /*
-+ * Test if the firmware was uploaded and is running.
-+ * As most BIOSes will initialize the device for us.
-+ */
-+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* Check the "Result Code" Bits (6:4) and act accordingly */
-+ switch (fw_state & RENESAS_FW_STATUS_RESULT) {
-+ case 0: /* No result yet */
-+ dev_err(&pdev->dev, "FW is not ready/loaded yet.");
-+ return -ENODEV;
-+
-+ case RENESAS_FW_STATUS_SUCCESS:
-+ dev_dbg(&pdev->dev, "FW is ready.");
-+ return 0;
-+
-+ case RENESAS_FW_STATUS_ERROR:
-+ dev_err(&pdev->dev, "HW is in an error state.");
-+ return -ENODEV;
-+
-+ default: /* All other states are marked as "Reserved states" */
-+ dev_err(&pdev->dev, "HW is in an invalid state (%x).",
-+ (fw_state & 0x70) >> 4);
-+ return -EINVAL;
-+ }
-+}
-+
- /* called during probe() after chip reset completes */
- static int xhci_pci_setup(struct usb_hcd *hcd)
- {
-@@ -368,6 +1275,27 @@ static int xhci_pci_probe(struct pci_dev
- struct hc_driver *driver;
- struct usb_hcd *hcd;
-
-+ /*
-+ * Check if this device is a RENESAS uPD720201/2 device.
-+ * Otherwise, we can continue with xhci_pci_probe as usual.
-+ */
-+ retval = renesas_fw_download_to_hw(dev, id, false);
-+ switch (retval) {
-+ case 0:
-+ break;
-+
-+ case 1: /* let it load the firmware and recontinue the probe. */
-+ return 0;
-+
-+ default:
-+ return retval;
-+ };
-+
-+ /* Check if this device is a RENESAS uPD720201/2 device. */
-+ retval = renesas_check_if_fw_dl_is_needed(dev);
-+ if (retval)
-+ return retval;
-+
- driver = (struct hc_driver *)id->driver_data;
-
- /* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -429,6 +1357,16 @@ static void xhci_pci_remove(struct pci_d
- {
- struct xhci_hcd *xhci;
-
-+ if (renesas_fw_alive_check(dev)) {
-+ /*
-+ * bail out early, if this was a renesas device w/o FW.
-+ * Else we might hit the NMI watchdog in xhci_handsake
-+ * during xhci_reset as part of the driver's unloading.
-+ * which we forced in the renesas_fw_callback().
-+ */
-+ return;
-+ }
-+
- xhci = hcd_to_xhci(pci_get_drvdata(dev));
- xhci->xhc_state |= XHCI_STATE_REMOVING;
-
-@@ -568,6 +1506,11 @@ static int xhci_pci_resume(struct usb_hc
- if (pdev->vendor == PCI_VENDOR_ID_INTEL)
- usb_enable_intel_xhci_ports(pdev);
-
-+ /* Check if this device is a RENESAS uPD720201/2 device. */
-+ retval = renesas_check_if_fw_dl_is_needed(pdev);
-+ if (retval)
-+ return retval;
-+
- if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
- xhci_ssic_port_unused_quirk(hcd, false);
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 09:24:30 +0000