diff options
Diffstat (limited to 'package')
3 files changed, 166 insertions, 0 deletions
diff --git a/package/boot/uboot-sunxi/patches/002-sun5i-give-pll6-a-sane-value.patch b/package/boot/uboot-sunxi/patches/002-sun5i-give-pll6-a-sane-value.patch new file mode 100644 index 0000000000..b4e0ee1847 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/002-sun5i-give-pll6-a-sane-value.patch @@ -0,0 +1,39 @@ +From 75ec90fda763b491e5169dcb6dce8abe3856d946 Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Sat, 14 Dec 2013 20:58:57 +0100 +Subject: [PATCH] sun5i: Give PLL6 a sane initial value + +The upstream kernel does not override PLL values as set by power-on-reset +and/or the bootloader if it can avoid doing so. + +The power-on-reset value for PLL6 is 2400MHz, which does not actually work, +the kernel does not know this and 2400 / 48 is 50 MHz, so the kernel happily +tries to use it as is for mmc. + +Set PLL6 to a working frequency so that the kernel can use it. This fixes +mmc in the upstream kernel not working on sun5i. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/cpu/armv7/sunxi/clock.c | 5 +++++ + 1 file changed, 5 insertions(+) + +diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c +index 57b136d..b9dd608 100644 +--- a/arch/arm/cpu/armv7/sunxi/clock.c ++++ b/arch/arm/cpu/armv7/sunxi/clock.c +@@ -43,6 +43,11 @@ static void clock_init_safe(void) + sdelay(200); + writel(AXI_DIV_1 << 0 | AHB_DIV_2 << 4 | APB0_DIV_1 << 8 | + CPU_CLK_SRC_PLL1 << 16, &ccm->cpu_ahb_apb0_cfg); ++#ifdef CONFIG_SUN5I ++ /* Power on reset default for PLL6 is 2400 MHz, which is faster then ++ * it can reliable do :| Set it to a 600 MHz instead. */ ++ writel(0x21009900, &ccm->pll6_cfg); ++#endif + #ifdef CONFIG_SUN7I + writel(0x1 << 6 | readl(&ccm->ahb_gate0), &ccm->ahb_gate0); + writel(0x1 << 31 | readl(&ccm->pll6_cfg), &ccm->pll6_cfg); +-- +1.8.5.1 + diff --git a/package/boot/uboot-sunxi/patches/003-sun5i-tweak-pll6-init-value.patch b/package/boot/uboot-sunxi/patches/003-sun5i-tweak-pll6-init-value.patch new file mode 100644 index 0000000000..3300f42bf9 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/003-sun5i-tweak-pll6-init-value.patch @@ -0,0 +1,33 @@ +From 8f70a049daa30be894158411439a36f920f0d11c Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Wed, 15 Jan 2014 20:13:04 +0100 +Subject: [PATCH] sun5i: Tweak pll6 init value + +There are multiple ways to get 600 MHz from PLL6, the sun5i ccmu is very +similar to the sun4i and sun7i ccmu. + +This commit changes the PLL6 initialization we do for sun5i to make the PLL6 +reg value match that of sun4i and sun7i. This also makes it closer to the +sun5i power on default, as we are now only changing the K-factor from 3 to 1. + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + arch/arm/cpu/armv7/sunxi/clock.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/cpu/armv7/sunxi/clock.c b/arch/arm/cpu/armv7/sunxi/clock.c +index b9dd608..54b8753 100644 +--- a/arch/arm/cpu/armv7/sunxi/clock.c ++++ b/arch/arm/cpu/armv7/sunxi/clock.c +@@ -46,7 +46,7 @@ static void clock_init_safe(void) + #ifdef CONFIG_SUN5I + /* Power on reset default for PLL6 is 2400 MHz, which is faster then + * it can reliable do :| Set it to a 600 MHz instead. */ +- writel(0x21009900, &ccm->pll6_cfg); ++ writel(0x21009911, &ccm->pll6_cfg); + #endif + #ifdef CONFIG_SUN7I + writel(0x1 << 6 | readl(&ccm->ahb_gate0), &ccm->ahb_gate0); +-- +1.8.5.1 + diff --git a/package/boot/uboot-sunxi/patches/004-a10-lime-fixup.patch b/package/boot/uboot-sunxi/patches/004-a10-lime-fixup.patch new file mode 100644 index 0000000000..32edb9c0b0 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/004-a10-lime-fixup.patch @@ -0,0 +1,94 @@ +From eccc92de2d133957fe2c126f18a5a5faef0bb93b Mon Sep 17 00:00:00 2001 +From: Hans de Goede <hdegoede@redhat.com> +Date: Thu, 9 Jan 2014 23:26:05 +0100 +Subject: [PATCH] sunxi: A10-OLinuXino-Lime support fixup + +Fix: +-code indentation +-dram timings, the used cas and tpr0 - tpr2 were typical sun5i / sun7i + settings, while they should be sun4i settings +-Properly sort boards.cfg entry +-Add status led support + +Signed-off-by: Hans de Goede <hdegoede@redhat.com> +--- + board/sunxi/dram_a10_olinuxino_l.c | 40 +++++++++++++++++++------------------- + boards.cfg | 2 +- + 2 files changed, 21 insertions(+), 21 deletions(-) + +diff --git a/board/sunxi/dram_a10_olinuxino_l.c b/board/sunxi/dram_a10_olinuxino_l.c +index 31b6542..24a1bd9 100644 +--- a/board/sunxi/dram_a10_olinuxino_l.c ++++ b/board/sunxi/dram_a10_olinuxino_l.c +@@ -4,28 +4,28 @@ + #include <asm/arch/dram.h> + + static struct dram_para dram_para = { +- .clock = 480, +- .type = 3, +- .rank_num = 1, +- .density = 4096, +- .io_width = 16, +- .bus_width = 16, +- .cas = 9, +- .zq = 123, +- .odt_en = 0, +- .size = 512, +- .tpr0 = 0x42d899b7, +- .tpr1 = 0xa090, +- .tpr2 = 0x22a00, +- .tpr3 = 0, +- .tpr4 = 0, +- .tpr5 = 0, +- .emr1 = 0x4, +- .emr2 = 0x10, +- .emr3 = 0, ++ .clock = 480, ++ .type = 3, ++ .rank_num = 1, ++ .density = 4096, ++ .io_width = 16, ++ .bus_width = 16, ++ .cas = 6, ++ .zq = 123, ++ .odt_en = 0, ++ .size = 512, ++ .tpr0 = 0x30926692, ++ .tpr1 = 0x1090, ++ .tpr2 = 0x1a0c8, ++ .tpr3 = 0, ++ .tpr4 = 0, ++ .tpr5 = 0, ++ .emr1 = 0x4, ++ .emr2 = 0, ++ .emr3 = 0, + }; + + unsigned long sunxi_dram_init(void) + { +- return dramc_init(&dram_para); ++ return dramc_init(&dram_para); + } +diff --git a/boards.cfg b/boards.cfg +index eda05de..dfeb07a 100644 +--- a/boards.cfg ++++ b/boards.cfg +@@ -345,6 +345,7 @@ Active arm armv7 s5pc1xx samsung goni + Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang@samsung.com> + Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - + Active arm armv7 sunxi - sunxi A10_MID_1GB sun4i:A10_MID_1GB,SPL - ++Active arm armv7 sunxi - sunxi A10-OLinuXino-Lime sun4i:A10_OLINUXINO_L,STATUSLED=226,SPL,SUNXI_EMAC - + Active arm armv7 sunxi - sunxi A10s-OLinuXino-M sun5i:A10S_OLINUXINO_M,STATUSLED=131,AXP152_POWER,CONS_INDEX=1,SPL,SUNXI_EMAC - + Active arm armv7 sunxi - sunxi A10s-OLinuXino-M_FEL sun5i:A10S_OLINUXINO_M,STATUSLED=131,AXP152_POWER,CONS_INDEX=1,SPL_FEL,SUNXI_EMAC - + Active arm armv7 sunxi - sunxi A13-OLinuXino sun5i:A13_OLINUXINO,SPL,STATUSLED=201,CONS_INDEX=2 - +@@ -415,7 +416,6 @@ Active arm armv7 sunxi - sunxi + Active arm armv7 sunxi - sunxi uhost_u1a sun4i:UHOST_U1A,SPL,STATUSLED=34 - + Active arm armv7 sunxi - sunxi wobo-i5 sun5i:WOBO_I5,SPL,STATUSLED=34 - + Active arm armv7 sunxi - sunxi xzpad700 sun5i:XZPAD700,SPL - +-Active arm armv7 sunxi - sunxi A10-OLinuXino-Lime sun4i:A10_OLINUXINO_L,SPL,SUNXI_EMAC - + Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org> + Active arm armv7 u8500 st-ericsson u8500 u8500_href - - + Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965@freescale.com> +-- +1.8.5.1 + |