diff options
Diffstat (limited to 'package/madwifi/patches/127-regaccess.patch')
| -rw-r--r-- | package/madwifi/patches/127-regaccess.patch | 312 |
1 files changed, 312 insertions, 0 deletions
diff --git a/package/madwifi/patches/127-regaccess.patch b/package/madwifi/patches/127-regaccess.patch new file mode 100644 index 0000000000..a1fd96cc6d --- /dev/null +++ b/package/madwifi/patches/127-regaccess.patch @@ -0,0 +1,312 @@ +Index: madwifi-dfs-r2996/ath_hal/ah_os.h +=================================================================== +--- madwifi-dfs-r2996.orig/ath_hal/ah_os.h 2007-12-01 19:36:04.943396719 +0100 ++++ madwifi-dfs-r2996/ath_hal/ah_os.h 2007-12-01 19:37:06.182886560 +0100 +@@ -33,7 +33,7 @@ + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * +- * $Id: ah_os.h 2727 2007-10-05 17:42:53Z mtaylor $ ++ * $Id: ah_os.h 2933 2007-11-23 09:38:18Z proski $ + */ + #ifndef _ATH_AH_OS_H_ + #define _ATH_AH_OS_H_ +@@ -42,16 +42,16 @@ + * Atheros Hardware Access Layer (HAL) OS Dependent Definitions. + */ + +-/* +-MadWifi safe register operations: ++/* ++ MadWifi safe register operations: + +- When hacking on registers directly we need to use the macros +- below, to avoid concurrent PCI access and abort mode errors. ++ When hacking on registers directly, we need to use the macros below to ++ avoid concurrent PCI access and abort mode errors. + + * ath_reg_read + * ATH_REG_WRITE + +-HAL-ONLY register operations: ++ HAL-ONLY register operations: + + * _OS_REG_READ + * _OS_REG_WRITE +@@ -60,26 +60,27 @@ + * ath_hal_reg_read. + * ath_hal_reg_write + +- When compiled in HAL: +- * We do not require locking overhead and function call unless user is debugging. +- * All HAL operations are executed in the context of a MadWifi wrapper call which holds +- the HAL lock. +- * Normally HAL is build with the non-modified version of this file so it doesnt have our +- funny macros anyway. +- +- When compiled in MadWifi: +- * The HAL wrapper API takes the HAL lock before invoking the HAL. +- * HAL access is already protected, and MadWifi must NOT access the functions listed above. +- ++ When compiled in HAL: ++ * We don't require locking overhead and function call except for ++ debugging. ++ * All HAL operations are executed in the context of a MadWifi wrapper ++ call that holds the HAL lock. ++ * Normally HAL is built with the non-modified version of this file, so ++ it doesn't have our funny macros anyway. ++ ++ When compiled in MadWifi: ++ * The HAL wrapper API takes the HAL lock before invoking the HAL. ++ * HAL access is already protected, and MadWifi must NOT access the ++ functions listed above. + */ + + /* +- * When building the HAL proper we use no GPL-contaminated include +- * files and must define these types ourself. Beware of these being +- * mismatched against the contents of <linux/types.h> ++ * When building the HAL proper, we use no GPL-licensed include files and must ++ * define Linux types ourselves. Please note that the definitions below don't ++ * exactly match those in <linux/types.h> + */ + #ifndef _LINUX_TYPES_H +-/* NB: arm defaults to unsigned so be explicit */ ++/* NB: ARM defaults to unsigned, so be explicit */ + typedef signed char int8_t; + typedef short int16_t; + typedef int int32_t; +@@ -93,36 +94,33 @@ + typedef unsigned int size_t; + typedef unsigned int u_int; + typedef void* va_list; +-#endif ++#endif /* !_LINUX_TYPES_H */ + + /* + * Linux/BSD gcc compatibility shims. + */ +-#define __printflike(_a,_b) \ +- __attribute__ ((__format__ (__printf__, _a, _b))) +-#define __va_list va_list ++#define __va_list va_list + #define OS_INLINE __inline + + extern int ath_hal_dma_beacon_response_time; + extern int ath_hal_sw_beacon_response_time; + extern int ath_hal_additional_swba_backoff; + +-void __ahdecl ath_hal_vprintf(struct ath_hal *ah, const char* fmt, +- va_list ap); +-void __ahdecl ath_hal_printf(struct ath_hal *ah, const char* fmt, ...); +-const char* __ahdecl ath_hal_ether_sprintf(const u_int8_t *mac); ++void __ahdecl ath_hal_vprintf(struct ath_hal *ah, const char *fmt, va_list ap); ++void __ahdecl ath_hal_printf(struct ath_hal *ah, const char *fmt, ...); ++const char *__ahdecl ath_hal_ether_sprintf(const u_int8_t *mac); + int __ahdecl ath_hal_memcmp(const void *a, const void *b, size_t n); +-void * __ahdecl ath_hal_malloc(size_t size); +-void __ahdecl ath_hal_free(void* p); ++void *__ahdecl ath_hal_malloc(size_t size); ++void __ahdecl ath_hal_free(void *p); + + /* Delay n microseconds. */ +-extern void __ahdecl ath_hal_delay(int); ++extern void __ahdecl ath_hal_delay(int); + #define OS_DELAY(_n) ath_hal_delay(_n) + + #define OS_MEMZERO(_a, _n) ath_hal_memzero((_a), (_n)) + extern void __ahdecl ath_hal_memzero(void *, size_t); + #define OS_MEMCPY(_d, _s, _n) ath_hal_memcpy(_d,_s,_n) +-extern void * __ahdecl ath_hal_memcpy(void *, const void *, size_t); ++extern void *__ahdecl ath_hal_memcpy(void *, const void *, size_t); + + #ifndef abs + #define abs(_a) __builtin_abs(_a) +@@ -133,7 +131,7 @@ + #endif + + struct ath_hal; +-extern u_int32_t __ahdecl ath_hal_getuptime(struct ath_hal *); ++extern u_int32_t __ahdecl ath_hal_getuptime(struct ath_hal *); + #define OS_GETUPTIME(_ah) ath_hal_getuptime(_ah) + + /* Byte order/swapping support. */ +@@ -142,9 +140,8 @@ + + #ifndef AH_BYTE_ORDER + /* +- * When the .inc file is not available (e.g. when building +- * in a kernel source tree); look for some other way to +- * setup the host byte order. ++ * When the .inc file is not available (e.g. when building in the kernel source ++ * tree), look for some other way to determine the host byte order. + */ + #ifdef __LITTLE_ENDIAN + #define AH_BYTE_ORDER AH_LITTLE_ENDIAN +@@ -155,93 +152,98 @@ + #ifndef AH_BYTE_ORDER + #error "Do not know host byte order" + #endif +-#endif /* AH_BYTE_ORDER */ ++#endif /* AH_BYTE_ORDER */ + + /* +- * Note that register accesses are done using target-specific +- * functions when debugging is enabled (AH_DEBUG) or we are +- * explicitly configured this way. +- * +- * The hardware registers are native little-endian byte order. +- * Big-endian hosts are handled by enabling hardware byte-swap +- * of register reads and writes at reset. But the PCI clock +- * domain registers are not byte swapped! Thus, on big-endian +- * platforms we have to byte-swap thoese registers specifically. +- * Most of this code is collapsed at compile time because the +- * register values are constants. +- * +- * Presumably when talking about hardware byte-swapping, the above +- * text is referring to the Atheros chipset, as the registers +- * referred to are in the PCI memory address space, and these are +- * never byte-swapped by PCI chipsets or bridges, but always +- * written directly (i.e. the format defined by the manufacturer). ++ * Some big-endian architectures don't set CONFIG_GENERIC_IOMAP, but fail to ++ * implement iowrite32be and ioread32be. Provide compatibility macros when ++ * it's needed. ++ * ++ * As of Linux 2.6.24, only MIPS, PARISC and PowerPC implement iowrite32be and ++ * ioread32be as functions. ++ * ++ * The downside or the replacement macros it that we may be byte-swapping data ++ * for the second time, so the native implementations should be preferred. + */ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12)) && \ ++ !defined(CONFIG_GENERIC_IOMAP) && (AH_BYTE_ORDER == AH_BIG_ENDIAN) && \ ++ !defined(__mips__) && !defined(__hppa__) && !defined(__powerpc__) ++# ifndef iowrite32be ++# define iowrite32be(_val, _addr) iowrite32(swab32((_val)), (_addr)) ++# endif ++# ifndef ioread32be ++# define ioread32be(_addr) swab32(ioread32((_addr))) ++# endif ++#endif ++ ++/* ++ * The register accesses are done using target-specific functions when ++ * debugging is enabled (AH_DEBUG) or it's explicitly requested for the target. ++ * ++ * The hardware registers use little-endian byte order natively. Big-endian ++ * systems are configured by HAL to enable hardware byte-swap of register reads ++ * and writes at reset. This avoid the need to byte-swap the data in software. ++ * However, the registers in a certain area from 0x4000 to 0x4fff (PCI clock ++ * domain registers) are not byte swapped! ++ * ++ * Since Linux I/O primitives default to little-endian operations, we only ++ * need to suppress byte-swapping on big-endian systems outside the area used ++ * by the PCI clock domain registers. ++ */ ++#if (AH_BYTE_ORDER == AH_BIG_ENDIAN) ++#define is_reg_le(__reg) ((0x4000 <= (__reg) && (__reg) < 0x5000)) ++#else ++#define is_reg_le(__reg) 1 ++#endif ++ + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) +-# if (AH_BYTE_ORDER == AH_BIG_ENDIAN) + #define _OS_REG_WRITE(_ah, _reg, _val) do { \ +- (0x4000 <= (_reg) && (_reg) < 0x5000) ? \ ++ is_reg_le(_reg) ? \ + iowrite32((_val), (_ah)->ah_sh + (_reg)) : \ + iowrite32be((_val), (_ah)->ah_sh + (_reg)); \ + } while (0) + #define _OS_REG_READ(_ah, _reg) \ +- ((0x4000 <= (_reg) && (_reg) < 0x5000) ? \ ++ (is_reg_le(_reg) ? \ + ioread32((_ah)->ah_sh + (_reg)) : \ +- ioread32be((_ah)->ah_sh + (_reg))); +-# else /* AH_LITTLE_ENDIAN */ +-#define _OS_REG_WRITE(_ah, _reg, _val) do { \ +- iowrite32(_val, (_ah)->ah_sh + (_reg)); \ +- } while (0) +-#define _OS_REG_READ(_ah, _reg) \ +- ioread32((_ah)->ah_sh + (_reg)) +- +-# endif /* AH_BYTE_ORDER */ ++ ioread32be((_ah)->ah_sh + (_reg))) + #else +-# if (AH_BYTE_ORDER == AH_BIG_ENDIAN) + #define _OS_REG_WRITE(_ah, _reg, _val) do { \ +- writel((0x4000 <= (_reg) && (_reg) < 0x5000) ? \ ++ writel(is_reg_le(_reg) ? \ + (_val) : cpu_to_le32(_val), \ + (_ah)->ah_sh + (_reg)); \ + } while (0) + #define _OS_REG_READ(_ah, _reg) \ +- ((0x4000 <= (_reg) && (_reg) < 0x5000) ? \ ++ (is_reg_le(_reg) ? \ + readl((_ah)->ah_sh + (_reg)) : \ + cpu_to_le32(readl((_ah)->ah_sh + (_reg)))) +-# else /* AH_LITTLE_ENDIAN */ +-#define _OS_REG_WRITE(_ah, _reg, _val) do { \ +- writel(_val, (_ah)->ah_sh + (_reg)); \ +- } while (0) +-#define _OS_REG_READ(_ah, _reg) \ +- readl((_ah)->ah_sh + (_reg)) +-# endif /* AH_BYTE_ORDER */ +-#endif /* KERNEL_VERSON(2,6,12) */ +- +-/* +-The functions in this section are not intended to be invoked by MadWifi driver +-code, but by the HAL. They are NOT safe for direct invocation when the +-sc->sc_hal_lock is not held. Use ath_reg_read and ATH_REG_WRITE instead! ++#endif /* KERNEL_VERSION(2,6,12) */ ++ ++/* ++ * The functions in this section are not intended to be invoked by MadWifi ++ * driver code, but by the HAL. They are NOT safe to call directly when the ++ * sc->sc_hal_lock is not held. Use ath_reg_read and ATH_REG_WRITE instead! + */ + #if defined(AH_DEBUG) || defined(AH_REGOPS_FUNC) || defined(AH_DEBUG_ALQ) + #define OS_REG_WRITE(_ah, _reg, _val) ath_hal_reg_write(_ah, _reg, _val) + #define OS_REG_READ(_ah, _reg) ath_hal_reg_read(_ah, _reg) +-extern void __ahdecl ath_hal_reg_write(struct ath_hal *ah, u_int reg, u_int32_t val); +-extern u_int32_t __ahdecl ath_hal_reg_read(struct ath_hal *ah, u_int reg); ++extern void __ahdecl ath_hal_reg_write(struct ath_hal *ah, u_int reg, ++ u_int32_t val); ++extern u_int32_t __ahdecl ath_hal_reg_read(struct ath_hal *ah, u_int reg); + #else + #define OS_REG_WRITE(_ah, _reg, _val) _OS_REG_WRITE(_ah, _reg, _val) + #define OS_REG_READ(_ah, _reg) _OS_REG_READ(_ah, _reg) +-#endif /* AH_DEBUG || AH_REGFUNC || AH_DEBUG_ALQ */ ++#endif /* AH_DEBUG || AH_REGFUNC || AH_DEBUG_ALQ */ + + extern char *ath_hal_func; + static inline void ath_hal_set_function(const char *name) +-#if defined(AH_DEBUG) + { ++#ifdef AH_DEBUG + ath_hal_func = (char *)name; +-} +-#else +-{ } + #endif ++} + + #ifdef AH_DEBUG_ALQ +-extern void __ahdecl OS_MARK(struct ath_hal *, u_int id, u_int32_t value); ++extern void __ahdecl OS_MARK(struct ath_hal *, u_int id, u_int32_t value); + #else + #define OS_MARK(_ah, _id, _v) + #endif +@@ -253,8 +255,9 @@ + * compiled with the default calling convention and are not called + * from within the HAL. + */ +-extern struct ath_hal *_ath_hal_attach(u_int16_t devid, HAL_SOFTC, +- HAL_BUS_TAG, HAL_BUS_HANDLE, HAL_STATUS*); +-extern void _ath_hal_detach(struct ath_hal *); ++extern struct ath_hal *_ath_hal_attach(u_int16_t devid, HAL_SOFTC, ++ HAL_BUS_TAG, HAL_BUS_HANDLE, ++ HAL_STATUS *); ++extern void _ath_hal_detach(struct ath_hal *); + +-#endif /* _ATH_AH_OSDEP_H_ */ ++#endif /* _ATH_AH_OSDEP_H_ */ |