diff options
Diffstat (limited to 'package/mac80211')
10 files changed, 6 insertions, 5577 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index 1367d9a24d..1766628bfe 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -10,12 +10,12 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=mac80211 -PKG_VERSION:=2009-10-09 +PKG_VERSION:=2009-11-03 PKG_RELEASE:=1 PKG_SOURCE_URL:= \ http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/10 \ http://wireless.kernel.org/download/compat-wireless-2.6 -PKG_MD5SUM:=15c310560765cbc35ed930fb0e815284 +PKG_MD5SUM:=f8434790c9552abb9c98926d7ae616fe PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION) diff --git a/package/mac80211/patches/200-mac80211_fix_incorrect_seq_num_hostapd.patch b/package/mac80211/patches/200-mac80211_fix_incorrect_seq_num_hostapd.patch deleted file mode 100644 index 5762c101f9..0000000000 --- a/package/mac80211/patches/200-mac80211_fix_incorrect_seq_num_hostapd.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 9b1ce526eb917c8b5c8497c327768130ee683392 Mon Sep 17 00:00:00 2001 -From: =?utf8?q?Bj=C3=B6rn=20Smedman?= <bjorn.smedman@venatech.se> -Date: Sat, 24 Oct 2009 20:55:09 +0200 -Subject: [PATCH] mac80211: fix for incorrect sequence number on hostapd injected frames -MIME-Version: 1.0 -Content-Type: text/plain; charset=utf8 -Content-Transfer-Encoding: 8bit - -When hostapd injects a frame, e.g. an authentication or association -response, mac80211 looks for a suitable access point virtual interface -to associate the frame with based on its source address. This makes it -possible e.g. to correctly assign sequence numbers to the frames. - -A small typo in the ethernet address comparison statement caused a -failure to find a suitable ap interface. Sequence numbers on such -frames where therefore left unassigned causing some clients -(especially windows-based 11b/g clients) to reject them and fail to -authenticate or associate with the access point. This patch fixes the -typo in the address comparison statement. - -Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se> -Reviewed-by: Johannes Berg <johannes@sipsolutions.net> -Cc: stable@kernel.org -Signed-off-by: John W. Linville <linville@tuxdriver.com> ---- - net/mac80211/tx.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c -index db4bda6..eaa4118 100644 ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1445,7 +1445,7 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, - if (tmp_sdata->vif.type != NL80211_IFTYPE_AP) - continue; - if (compare_ether_addr(tmp_sdata->dev->dev_addr, -- hdr->addr2)) { -+ hdr->addr2) == 0) { - dev_hold(tmp_sdata->dev); - dev_put(sdata->dev); - sdata = tmp_sdata; --- -1.6.5.1 - diff --git a/package/mac80211/patches/201-ath5k-WAR-for-AR71xx-PCI-bug.patch b/package/mac80211/patches/201-ath5k-WAR-for-AR71xx-PCI-bug.patch index 90fba05efc..25e6f3ddd6 100644 --- a/package/mac80211/patches/201-ath5k-WAR-for-AR71xx-PCI-bug.patch +++ b/package/mac80211/patches/201-ath5k-WAR-for-AR71xx-PCI-bug.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c -@@ -1372,10 +1372,18 @@ int ath5k_hw_reset(struct ath5k_hw *ah, +@@ -1357,10 +1357,18 @@ int ath5k_hw_reset(struct ath5k_hw *ah, * guess we can tweak it and see how it goes ;-) */ if (ah->ah_version != AR5K_AR5210) { diff --git a/package/mac80211/patches/301-rt2x00-Add-rt2x00soc-bus-module.patch b/package/mac80211/patches/301-rt2x00-Add-rt2x00soc-bus-module.patch deleted file mode 100644 index 5709432168..0000000000 --- a/package/mac80211/patches/301-rt2x00-Add-rt2x00soc-bus-module.patch +++ /dev/null @@ -1,249 +0,0 @@ -From 671e062837669b6d4a5e75d7d08ff485a7510e80 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 8 Aug 2009 23:42:51 +0200 -Subject: [PATCH 1/3] rt2x00: Add rt2x00soc bus module - -Add new library module for SoC drivers. -This is needed to fully support the platform -driver part of rt2800pci. - -Based on original patch from Felix. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/Kconfig | 4 + - drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2x00soc.c | 159 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2x00soc.h | 52 ++++++++++ - 4 files changed, 216 insertions(+), 0 deletions(-) - create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.c - create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.h - ---- a/drivers/net/wireless/rt2x00/Makefile -+++ b/drivers/net/wireless/rt2x00/Makefile -@@ -11,6 +11,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2 - - obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o - obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o -+obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o - obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o - obj-$(CONFIG_RT2400PCI) += rt2400pci.o - obj-$(CONFIG_RT2500PCI) += rt2500pci.o ---- /dev/null -+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c -@@ -0,0 +1,159 @@ -+/* -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project -+ <http://rt2x00.serialmonkey.com> -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the -+ Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ */ -+ -+/* -+ Module: rt2x00soc -+ Abstract: rt2x00 generic soc device routines. -+ */ -+ -+#include <linux/bug.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+ -+#include "rt2x00.h" -+#include "rt2x00soc.h" -+ -+static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev) -+{ -+ kfree(rt2x00dev->rf); -+ rt2x00dev->rf = NULL; -+ -+ kfree(rt2x00dev->eeprom); -+ rt2x00dev->eeprom = NULL; -+} -+ -+static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev) -+{ -+ struct platform_device *pdev = to_platform_device(rt2x00dev->dev); -+ struct resource *res; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) -+ return -ENODEV; -+ -+ rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start); -+ if (!rt2x00dev->csr.base) -+ goto exit; -+ -+ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); -+ if (!rt2x00dev->eeprom) -+ goto exit; -+ -+ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); -+ if (!rt2x00dev->rf) -+ goto exit; -+ -+ return 0; -+ -+exit: -+ ERROR_PROBE("Failed to allocate registers.\n"); -+ rt2x00soc_free_reg(rt2x00dev); -+ -+ return -ENOMEM; -+} -+ -+int rt2x00soc_probe(struct platform_device *pdev, -+ const unsigned short chipset, -+ const struct rt2x00_ops *ops) -+{ -+ struct ieee80211_hw *hw; -+ struct rt2x00_dev *rt2x00dev; -+ int retval; -+ -+ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); -+ if (!hw) { -+ ERROR_PROBE("Failed to allocate hardware.\n"); -+ return -ENOMEM; -+ } -+ -+ platform_set_drvdata(pdev, hw); -+ -+ rt2x00dev = hw->priv; -+ rt2x00dev->dev = &pdev->dev; -+ rt2x00dev->ops = ops; -+ rt2x00dev->hw = hw; -+ rt2x00dev->irq = platform_get_irq(pdev, 0); -+ rt2x00dev->name = pdev->dev.driver->name; -+ -+ rt2x00_set_chip_rt(rt2x00dev, chipset); -+ -+ retval = rt2x00soc_alloc_reg(rt2x00dev); -+ if (retval) -+ goto exit_free_device; -+ -+ retval = rt2x00lib_probe_dev(rt2x00dev); -+ if (retval) -+ goto exit_free_reg; -+ -+ return 0; -+ -+exit_free_reg: -+ rt2x00soc_free_reg(rt2x00dev); -+ -+exit_free_device: -+ ieee80211_free_hw(hw); -+ -+ return retval; -+} -+ -+int rt2x00soc_remove(struct platform_device *pdev) -+{ -+ struct ieee80211_hw *hw = platform_get_drvdata(pdev); -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ -+ /* -+ * Free all allocated data. -+ */ -+ rt2x00lib_remove_dev(rt2x00dev); -+ rt2x00soc_free_reg(rt2x00dev); -+ ieee80211_free_hw(hw); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(rt2x00soc_remove); -+ -+#ifdef CONFIG_PM -+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct ieee80211_hw *hw = platform_get_drvdata(pdev); -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ -+ return rt2x00lib_suspend(rt2x00dev, state); -+} -+EXPORT_SYMBOL_GPL(rt2x00soc_suspend); -+ -+int rt2x00soc_resume(struct platform_device *pdev) -+{ -+ struct ieee80211_hw *hw = platform_get_drvdata(pdev); -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ -+ return rt2x00lib_resume(rt2x00dev); -+} -+EXPORT_SYMBOL_GPL(rt2x00soc_resume); -+#endif /* CONFIG_PM */ -+ -+/* -+ * rt2x00soc module information. -+ */ -+MODULE_AUTHOR(DRV_PROJECT); -+MODULE_VERSION(DRV_VERSION); -+MODULE_DESCRIPTION("rt2x00 soc library"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h -@@ -0,0 +1,52 @@ -+/* -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project -+ <http://rt2x00.serialmonkey.com> -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the -+ Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ */ -+ -+/* -+ Module: rt2x00soc -+ Abstract: Data structures for the rt2x00soc module. -+ */ -+ -+#ifndef RT2X00SOC_H -+#define RT2X00SOC_H -+ -+#define KSEG1ADDR(__ptr) __ptr -+ -+#define __rt2x00soc_probe(__chipset, __ops) \ -+static int __rt2x00soc_probe(struct platform_device *pdev) \ -+{ \ -+ return rt2x00soc_probe(pdev, (__chipset), (__ops)); \ -+} -+ -+/* -+ * SoC driver handlers. -+ */ -+int rt2x00soc_probe(struct platform_device *pdev, -+ const unsigned short chipset, -+ const struct rt2x00_ops *ops); -+int rt2x00soc_remove(struct platform_device *pdev); -+#ifdef CONFIG_PM -+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state); -+int rt2x00soc_resume(struct platform_device *pdev); -+#else -+#define rt2x00soc_suspend NULL -+#define rt2x00soc_resume NULL -+#endif /* CONFIG_PM */ -+ -+#endif /* RT2X00SOC_H */ diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch deleted file mode 100644 index 80ff246cfe..0000000000 --- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch +++ /dev/null @@ -1,5225 +0,0 @@ -From 8dff6729a634d7cf223679d9a29a3df77927540c Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 8 Aug 2009 23:47:53 +0200 -Subject: [PATCH 2/3] rt2x00: Implement support for rt2800pci - -Add support for the rt2800pci chipset. - -Includes various patches from Luis, Mattias, Mark, Felix and Xose. - -Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> -Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> -Signed-off-by: Mark Asselstine <asselsm@gmail.com> -Signed-off-by: Felix Fietkau <nbd@openwrt.org> -Signed-off-by: Luis Correia <luis.f.correia@gmail.com> -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/Kconfig | 26 + - drivers/net/wireless/rt2x00/Makefile | 1 + - drivers/net/wireless/rt2x00/rt2800pci.c | 3243 +++++++++++++++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800pci.h | 1929 ++++++++++++++++++ - drivers/net/wireless/rt2x00/rt2x00.h | 6 + - 5 files changed, 5205 insertions(+), 0 deletions(-) - create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c - create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h - ---- a/drivers/net/wireless/rt2x00/Makefile -+++ b/drivers/net/wireless/rt2x00/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u - obj-$(CONFIG_RT2400PCI) += rt2400pci.o - obj-$(CONFIG_RT2500PCI) += rt2500pci.o - obj-$(CONFIG_RT61PCI) += rt61pci.o -+obj-$(CONFIG_RT2800PCI) += rt2800pci.o - obj-$(CONFIG_RT2500USB) += rt2500usb.o - obj-$(CONFIG_RT73USB) += rt73usb.o - obj-$(CONFIG_RT2800USB) += rt2800usb.o ---- /dev/null -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c -@@ -0,0 +1,3240 @@ -+/* -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project -+ <http://rt2x00.serialmonkey.com> -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the -+ Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ */ -+ -+/* -+ Module: rt2800pci -+ Abstract: rt2800pci device specific routines. -+ Supported chipsets: RT2800E & RT2800ED. -+ */ -+ -+#include <linux/crc-ccitt.h> -+#include <linux/delay.h> -+#include <linux/etherdevice.h> -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/pci.h> -+#include <linux/platform_device.h> -+#include <linux/eeprom_93cx6.h> -+ -+#include "rt2x00.h" -+#include "rt2x00pci.h" -+#include "rt2x00soc.h" -+#include "rt2800pci.h" -+ -+#ifdef CONFIG_RT2800PCI_PCI_MODULE -+#define CONFIG_RT2800PCI_PCI -+#endif -+ -+#ifdef CONFIG_RT2800PCI_WISOC_MODULE -+#define CONFIG_RT2800PCI_WISOC -+#endif -+ -+/* -+ * Allow hardware encryption to be disabled. -+ */ -+static int modparam_nohwcrypt = 0; -+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -+ -+/* -+ * Register access. -+ * BBP and RF register require indirect register access, -+ * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. -+ * These indirect registers work with busy bits, -+ * and we will try maximal REGISTER_BUSY_COUNT times to access -+ * the register while taking a REGISTER_BUSY_DELAY us delay -+ * between each attampt. When the busy bit is still set at that time, -+ * the access attempt is considered to have failed, -+ * and we will print an error. -+ */ -+#define WAIT_FOR_BBP(__dev, __reg) \ -+ rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) -+#define WAIT_FOR_RFCSR(__dev, __reg) \ -+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) -+#define WAIT_FOR_RF(__dev, __reg) \ -+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) -+#define WAIT_FOR_MCU(__dev, __reg) \ -+ rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \ -+ H2M_MAILBOX_CSR_OWNER, (__reg)) -+ -+static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, const u8 value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the BBP becomes available, afterwards we -+ * can safely write the new data into the register. -+ */ -+ if (WAIT_FOR_BBP(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); -+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); -+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); -+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); -+ -+ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg); -+ } -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ -+static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, u8 *value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the BBP becomes available, afterwards we -+ * can safely write the read request into the register. -+ * After the data has been written, we wait until hardware -+ * returns the correct value, if at any time the register -+ * doesn't become available in time, reg will be 0xffffffff -+ * which means we return 0xff to the caller. -+ */ -+ if (WAIT_FOR_BBP(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); -+ rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); -+ rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); -+ -+ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg); -+ -+ WAIT_FOR_BBP(rt2x00dev, ®); -+ } -+ -+ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ -+static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, const u8 value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the RFCSR becomes available, afterwards we -+ * can safely write the new data into the register. -+ */ -+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ -+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); -+ } -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ -+static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, u8 *value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the RFCSR becomes available, afterwards we -+ * can safely write the read request into the register. -+ * After the data has been written, we wait until hardware -+ * returns the correct value, if at any time the register -+ * doesn't become available in time, reg will be 0xffffffff -+ * which means we return 0xff to the caller. -+ */ -+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ -+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); -+ -+ WAIT_FOR_RFCSR(rt2x00dev, ®); -+ } -+ -+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ -+static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev, -+ const unsigned int word, const u32 value) -+{ -+ u32 reg; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the RF becomes available, afterwards we -+ * can safely write the new data into the register. -+ */ -+ if (WAIT_FOR_RF(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); -+ rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); -+ rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); -+ rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); -+ -+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg); -+ rt2x00_rf_write(rt2x00dev, word, value); -+ } -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ -+static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev, -+ const u8 command, const u8 token, -+ const u8 arg0, const u8 arg1) -+{ -+ u32 reg; -+ -+ /* -+ * RT2880 and RT3052 don't support MCU requests. -+ */ -+ if (rt2x00_rt(&rt2x00dev->chip, RT2880) || -+ rt2x00_rt(&rt2x00dev->chip, RT3052)) -+ return; -+ -+ mutex_lock(&rt2x00dev->csr_mutex); -+ -+ /* -+ * Wait until the MCU becomes available, afterwards we -+ * can safely write the new data into the register. -+ */ -+ if (WAIT_FOR_MCU(rt2x00dev, ®)) { -+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); -+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); -+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); -+ rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); -+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); -+ -+ reg = 0; -+ rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); -+ rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); -+ } -+ -+ mutex_unlock(&rt2x00dev->csr_mutex); -+} -+ -+static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) -+{ -+ unsigned int i; -+ u32 reg; -+ -+ for (i = 0; i < 200; i++) { -+ rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, ®); -+ -+ if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) || -+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) || -+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) || -+ (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token)) -+ break; -+ -+ udelay(REGISTER_BUSY_DELAY); -+ } -+ -+ if (i == 200) -+ ERROR(rt2x00dev, "MCU request failed, no response from hardware\n"); -+ -+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); -+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); -+} -+ -+#ifdef CONFIG_RT2800PCI_WISOC -+static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) -+{ -+ u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */ -+ -+ memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); -+} -+#else -+static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) -+{ -+} -+#endif /* CONFIG_RT2800PCI_WISOC */ -+ -+#ifdef CONFIG_RT2800PCI_PCI -+static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -+{ -+ struct rt2x00_dev *rt2x00dev = eeprom->data; -+ u32 reg; -+ -+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); -+ -+ eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); -+ eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); -+ eeprom->reg_data_clock = -+ !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); -+ eeprom->reg_chip_select = -+ !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); -+} -+ -+static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -+{ -+ struct rt2x00_dev *rt2x00dev = eeprom->data; -+ u32 reg = 0; -+ -+ rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); -+ rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); -+ rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, -+ !!eeprom->reg_data_clock); -+ rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, -+ !!eeprom->reg_chip_select); -+ -+ rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); -+} -+ -+static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) -+{ -+ struct eeprom_93cx6 eeprom; -+ u32 reg; -+ -+ rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); -+ -+ eeprom.data = rt2x00dev; -+ eeprom.register_read = rt2800pci_eepromregister_read; -+ eeprom.register_write = rt2800pci_eepromregister_write; -+ eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ? -+ PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; -+ eeprom.reg_data_in = 0; -+ eeprom.reg_data_out = 0; -+ eeprom.reg_data_clock = 0; -+ eeprom.reg_chip_select = 0; -+ -+ eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, -+ EEPROM_SIZE / sizeof(u16)); -+} -+#else -+static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) -+{ -+} -+#endif /* CONFIG_RT2800PCI_PCI */ -+ -+#ifdef CONFIG_RT2X00_LIB_DEBUGFS -+static const struct rt2x00debug rt2800pci_rt2x00debug = { -+ .owner = THIS_MODULE, -+ .csr = { -+ .read = rt2x00pci_register_read, -+ .write = rt2x00pci_register_write, -+ .flags = RT2X00DEBUGFS_OFFSET, -+ .word_base = CSR_REG_BASE, -+ .word_size = sizeof(u32), -+ .word_count = CSR_REG_SIZE / sizeof(u32), -+ }, -+ .eeprom = { -+ .read = rt2x00_eeprom_read, -+ .write = rt2x00_eeprom_write, -+ .word_base = EEPROM_BASE, -+ .word_size = sizeof(u16), -+ .word_count = EEPROM_SIZE / sizeof(u16), -+ }, -+ .bbp = { -+ .read = rt2800pci_bbp_read, -+ .write = rt2800pci_bbp_write, -+ .word_base = BBP_BASE, -+ .word_size = sizeof(u8), -+ .word_count = BBP_SIZE / sizeof(u8), -+ }, -+ .rf = { -+ .read = rt2x00_rf_read, -+ .write = rt2800pci_rf_write, -+ .word_base = RF_BASE, -+ .word_size = sizeof(u32), -+ .word_count = RF_SIZE / sizeof(u32), -+ }, -+}; -+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -+ -+static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -+{ -+ u32 reg; -+ -+ rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); -+ return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); -+} -+ -+#ifdef CONFIG_RT2X00_LIB_LEDS -+static void rt2800pci_brightness_set(struct led_classdev *led_cdev, -+ enum led_brightness brightness) -+{ -+ struct rt2x00_led *led = -+ container_of(led_cdev, struct rt2x00_led, led_dev); -+ unsigned int enabled = brightness != LED_OFF; -+ unsigned int bg_mode = -+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); -+ unsigned int polarity = -+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, -+ EEPROM_FREQ_LED_POLARITY); -+ unsigned int ledmode = -+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, -+ EEPROM_FREQ_LED_MODE); -+ -+ if (led->type == LED_TYPE_RADIO) { -+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, -+ enabled ? 0x20 : 0); -+ } else if (led->type == LED_TYPE_ASSOC) { -+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, -+ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); -+ } else if (led->type == LED_TYPE_QUALITY) { -+ /* -+ * The brightness is divided into 6 levels (0 - 5), -+ * The specs tell us the following levels: -+ * 0, 1 ,3, 7, 15, 31 -+ * to determine the level in a simple way we can simply -+ * work with bitshifting: -+ * (1 << level) - 1 -+ */ -+ rt2800pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, -+ (1 << brightness / (LED_FULL / 6)) - 1, -+ polarity); -+ } -+} -+ -+static int rt2800pci_blink_set(struct led_classdev *led_cdev, -+ unsigned long *delay_on, -+ unsigned long *delay_off) -+{ -+ struct rt2x00_led *led = -+ container_of(led_cdev, struct rt2x00_led, led_dev); -+ u32 reg; -+ -+ rt2x00pci_register_read(led->rt2x00dev, LED_CFG, ®); -+ rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); -+ rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); -+ rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); -+ rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); -+ rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); -+ rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); -+ rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); -+ rt2x00pci_register_write(led->rt2x00dev, LED_CFG, reg); -+ -+ return 0; -+} -+ -+static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00_led *led, -+ enum led_type type) -+{ -+ led->rt2x00dev = rt2x00dev; -+ led->type = type; -+ led->led_dev.brightness_set = rt2800pci_brightness_set; -+ led->led_dev.blink_set = rt2800pci_blink_set; -+ led->flags = LED_INITIALIZED; -+} -+#endif /* CONFIG_RT2X00_LIB_LEDS */ -+ -+/* -+ * Configuration handlers. -+ */ -+static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_crypto *crypto, -+ struct ieee80211_key_conf *key) -+{ -+ struct mac_wcid_entry wcid_entry; -+ struct mac_iveiv_entry iveiv_entry; -+ u32 offset; -+ u32 reg; -+ -+ offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); -+ -+ rt2x00pci_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, -+ !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, -+ (crypto->cmd == SET_KEY) * crypto->cipher); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, -+ (crypto->cmd == SET_KEY) * crypto->bssidx); -+ rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); -+ rt2x00pci_register_write(rt2x00dev, offset, reg); -+ -+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx); -+ -+ memset(&iveiv_entry, 0, sizeof(iveiv_entry)); -+ if ((crypto->cipher == CIPHER_TKIP) || -+ (crypto->cipher == CIPHER_TKIP_NO_MIC) || -+ (crypto->cipher == CIPHER_AES)) -+ iveiv_entry.iv[3] |= 0x20; -+ iveiv_entry.iv[3] |= key->keyidx << 6; -+ rt2x00pci_register_multiwrite(rt2x00dev, offset, -+ &iveiv_entry, sizeof(iveiv_entry)); -+ -+ offset = MAC_WCID_ENTRY(key->hw_key_idx); -+ -+ memset(&wcid_entry, 0, sizeof(wcid_entry)); -+ if (crypto->cmd == SET_KEY) -+ memcpy(&wcid_entry, crypto->address, ETH_ALEN); -+ rt2x00pci_register_multiwrite(rt2x00dev, offset, -+ &wcid_entry, sizeof(wcid_entry)); -+} -+ -+static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_crypto *crypto, -+ struct ieee80211_key_conf *key) -+{ -+ struct hw_key_entry key_entry; -+ struct rt2x00_field32 field; -+ u32 offset; -+ u32 reg; -+ -+ if (crypto->cmd == SET_KEY) { -+ key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; -+ -+ memcpy(key_entry.key, crypto->key, -+ sizeof(key_entry.key)); -+ memcpy(key_entry.tx_mic, crypto->tx_mic, -+ sizeof(key_entry.tx_mic)); -+ memcpy(key_entry.rx_mic, crypto->rx_mic, -+ sizeof(key_entry.rx_mic)); -+ -+ offset = SHARED_KEY_ENTRY(key->hw_key_idx); -+ rt2x00pci_register_multiwrite(rt2x00dev, offset, -+ &key_entry, sizeof(key_entry)); -+ } -+ -+ /* -+ * The cipher types are stored over multiple registers -+ * starting with SHARED_KEY_MODE_BASE each word will have -+ * 32 bits and contains the cipher types for 2 bssidx each. -+ * Using the correct defines correctly will cause overhead, -+ * so just calculate the correct offset. -+ */ -+ field.bit_offset = 4 * (key->hw_key_idx % 8); -+ field.bit_mask = 0x7 << field.bit_offset; -+ -+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); -+ -+ rt2x00pci_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, field, -+ (crypto->cmd == SET_KEY) * crypto->cipher); -+ rt2x00pci_register_write(rt2x00dev, offset, reg); -+ -+ /* -+ * Update WCID information -+ */ -+ rt2800pci_config_wcid_attr(rt2x00dev, crypto, key); -+ -+ return 0; -+} -+ -+static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_crypto *crypto, -+ struct ieee80211_key_conf *key) -+{ -+ struct hw_key_entry key_entry; -+ u32 offset; -+ -+ if (crypto->cmd == SET_KEY) { -+ /* -+ * 1 pairwise key is possible per AID, this means that the AID -+ * equals our hw_key_idx. Make sure the WCID starts _after_ the -+ * last possible shared key entry. -+ */ -+ if (crypto->aid > (256 - 32)) -+ return -ENOSPC; -+ -+ key->hw_key_idx = 32 + crypto->aid; -+ -+ -+ memcpy(key_entry.key, crypto->key, -+ sizeof(key_entry.key)); -+ memcpy(key_entry.tx_mic, crypto->tx_mic, -+ sizeof(key_entry.tx_mic)); -+ memcpy(key_entry.rx_mic, crypto->rx_mic, -+ sizeof(key_entry.rx_mic)); -+ -+ offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); -+ rt2x00pci_register_multiwrite(rt2x00dev, offset, -+ &key_entry, sizeof(key_entry)); -+ } -+ -+ /* -+ * Update WCID information -+ */ -+ rt2800pci_config_wcid_attr(rt2x00dev, crypto, key); -+ -+ return 0; -+} -+ -+static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev, -+ const unsigned int filter_flags) -+{ -+ u32 reg; -+ -+ /* -+ * Start configuration steps. -+ * Note that the version error will always be dropped -+ * and broadcast frames will always be accepted since -+ * there is no filter for it at this time. -+ */ -+ rt2x00pci_register_read(rt2x00dev, RX_FILTER_CFG, ®); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, -+ !(filter_flags & FIF_FCSFAIL)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, -+ !(filter_flags & FIF_PLCPFAIL)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, -+ !(filter_flags & FIF_PROMISC_IN_BSS)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, -+ !(filter_flags & FIF_ALLMULTI)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, -+ !(filter_flags & FIF_CONTROL)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, -+ !(filter_flags & FIF_CONTROL)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, -+ !(filter_flags & FIF_CONTROL)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, -+ !(filter_flags & FIF_CONTROL)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, -+ !(filter_flags & FIF_CONTROL)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, -+ !(filter_flags & FIF_PSPOLL)); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); -+ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, -+ !(filter_flags & FIF_CONTROL)); -+ rt2x00pci_register_write(rt2x00dev, RX_FILTER_CFG, reg); -+} -+ -+static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00_intf *intf, -+ struct rt2x00intf_conf *conf, -+ const unsigned int flags) -+{ -+ unsigned int beacon_base; -+ u32 reg; -+ -+ if (flags & CONFIG_UPDATE_TYPE) { -+ /* -+ * Clear current synchronisation setup. -+ * For the Beacon base registers we only need to clear -+ * the first byte since that byte contains the VALID and OWNER -+ * bits which (when set to 0) will invalidate the entire beacon. -+ */ -+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); -+ rt2x00pci_register_write(rt2x00dev, beacon_base, 0); -+ -+ /* -+ * Enable synchronisation. -+ */ -+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); -+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); -+ } -+ -+ if (flags & CONFIG_UPDATE_MAC) { -+ reg = le32_to_cpu(conf->mac[1]); -+ rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); -+ conf->mac[1] = cpu_to_le32(reg); -+ -+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, -+ conf->mac, sizeof(conf->mac)); -+ } -+ -+ if (flags & CONFIG_UPDATE_BSSID) { -+ reg = le32_to_cpu(conf->bssid[1]); -+ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); -+ rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); -+ conf->bssid[1] = cpu_to_le32(reg); -+ -+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, -+ conf->bssid, sizeof(conf->bssid)); -+ } -+} -+ -+static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_erp *erp) -+{ -+ u32 reg; -+ -+ rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); -+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); -+ rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®); -+ rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, -+ !!erp->short_preamble); -+ rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, -+ !!erp->short_preamble); -+ rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, -+ erp->cts_protection ? 2 : 0); -+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, -+ erp->basic_rates); -+ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); -+ -+ rt2x00pci_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); -+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); -+ rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); -+ rt2x00pci_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, XIFS_TIME_CFG, ®); -+ rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); -+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); -+ rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); -+ rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); -+ rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); -+ rt2x00pci_register_write(rt2x00dev, XIFS_TIME_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); -+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, -+ erp->beacon_int * 16); -+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); -+} -+ -+static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev, -+ struct antenna_setup *ant) -+{ -+ u8 r1; -+ u8 r3; -+ -+ rt2800pci_bbp_read(rt2x00dev, 1, &r1); -+ rt2800pci_bbp_read(rt2x00dev, 3, &r3); -+ -+ /* -+ * Configure the TX antenna. -+ */ -+ switch ((int)ant->tx) { -+ case 1: -+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); -+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); -+ break; -+ case 2: -+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); -+ break; -+ case 3: -+ /* Do nothing */ -+ break; -+ } -+ -+ /* -+ * Configure the RX antenna. -+ */ -+ switch ((int)ant->rx) { -+ case 1: -+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); -+ break; -+ case 2: -+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); -+ break; -+ case 3: -+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); -+ break; -+ } -+ -+ rt2800pci_bbp_write(rt2x00dev, 3, r3); -+ rt2800pci_bbp_write(rt2x00dev, 1, r1); -+} -+ -+static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_conf *libconf) -+{ -+ u16 eeprom; -+ short lna_gain; -+ -+ if (libconf->rf.channel <= 14) { -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); -+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); -+ } else if (libconf->rf.channel <= 64) { -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); -+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); -+ } else if (libconf->rf.channel <= 128) { -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); -+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); -+ } else { -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); -+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); -+ } -+ -+ rt2x00dev->lna_gain = lna_gain; -+} -+ -+static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); -+ -+ if (rt2x00dev->default_ant.tx == 1) -+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); -+ -+ if (rt2x00dev->default_ant.rx == 1) { -+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); -+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); -+ } else if (rt2x00dev->default_ant.rx == 2) -+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); -+ -+ if (rf->channel > 14) { -+ /* -+ * When TX power is below 0, we should increase it by 7 to -+ * make it a positive value (Minumum value is -7). -+ * However this means that values between 0 and 7 have -+ * double meaning, and we should set a 7DBm boost flag. -+ */ -+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, -+ (info->tx_power1 >= 0)); -+ -+ if (info->tx_power1 < 0) -+ info->tx_power1 += 7; -+ -+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, -+ TXPOWER_A_TO_DEV(info->tx_power1)); -+ -+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, -+ (info->tx_power2 >= 0)); -+ -+ if (info->tx_power2 < 0) -+ info->tx_power2 += 7; -+ -+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, -+ TXPOWER_A_TO_DEV(info->tx_power2)); -+ } else { -+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, -+ TXPOWER_G_TO_DEV(info->tx_power1)); -+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, -+ TXPOWER_G_TO_DEV(info->tx_power2)); -+ } -+ -+ rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); -+ -+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1); -+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); -+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); -+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); -+ -+ udelay(200); -+ -+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1); -+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); -+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); -+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); -+ -+ udelay(200); -+ -+ rt2800pci_rf_write(rt2x00dev, 1, rf->rf1); -+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); -+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); -+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); -+} -+ -+static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ u8 rfcsr; -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1); -+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); -+ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, -+ TXPOWER_G_TO_DEV(info->tx_power1)); -+ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); -+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 24, -+ rt2x00dev->calibration[conf_is_ht40(conf)]); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); -+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); -+} -+ -+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ u32 reg; -+ unsigned int tx_pin; -+ u8 bbp; -+ -+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) -+ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info); -+ else -+ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info); -+ -+ /* -+ * Change BBP settings -+ */ -+ rt2800pci_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); -+ rt2800pci_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); -+ rt2800pci_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); -+ rt2800pci_bbp_write(rt2x00dev, 86, 0); -+ -+ if (rf->channel <= 14) { -+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { -+ rt2800pci_bbp_write(rt2x00dev, 82, 0x62); -+ rt2800pci_bbp_write(rt2x00dev, 75, 0x46); -+ } else { -+ rt2800pci_bbp_write(rt2x00dev, 82, 0x84); -+ rt2800pci_bbp_write(rt2x00dev, 75, 0x50); -+ } -+ } else { -+ rt2800pci_bbp_write(rt2x00dev, 82, 0xf2); -+ -+ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) -+ rt2800pci_bbp_write(rt2x00dev, 75, 0x46); -+ else -+ rt2800pci_bbp_write(rt2x00dev, 75, 0x50); -+ } -+ -+ rt2x00pci_register_read(rt2x00dev, TX_BAND_CFG, ®); -+ rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); -+ rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); -+ rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); -+ rt2x00pci_register_write(rt2x00dev, TX_BAND_CFG, reg); -+ -+ tx_pin = 0; -+ -+ /* Turn on unused PA or LNA when not using 1T or 1R */ -+ if (rt2x00dev->default_ant.tx != 1) { -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); -+ } -+ -+ /* Turn on unused PA or LNA when not using 1T or 1R */ -+ if (rt2x00dev->default_ant.rx != 1) { -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); -+ } -+ -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); -+ -+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); -+ -+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); -+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); -+ rt2800pci_bbp_write(rt2x00dev, 4, bbp); -+ -+ rt2800pci_bbp_read(rt2x00dev, 3, &bbp); -+ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); -+ rt2800pci_bbp_write(rt2x00dev, 3, bbp); -+ -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { -+ if (conf_is_ht40(conf)) { -+ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a); -+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a); -+ rt2800pci_bbp_write(rt2x00dev, 73, 0x16); -+ } else { -+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16); -+ rt2800pci_bbp_write(rt2x00dev, 70, 0x08); -+ rt2800pci_bbp_write(rt2x00dev, 73, 0x11); -+ } -+ } -+ -+ msleep(1); -+} -+ -+static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev, -+ const int txpower) -+{ -+ u32 reg; -+ u32 value = TXPOWER_G_TO_DEV(txpower); -+ u8 r1; -+ -+ rt2800pci_bbp_read(rt2x00dev, 1, &r1); -+ rt2x00_set_field8(®, BBP1_TX_POWER, 0); -+ rt2800pci_bbp_write(rt2x00dev, 1, r1); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_0, ®); -+ rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); -+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_0, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_1, ®); -+ rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); -+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_1, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_2, ®); -+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); -+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_2, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_3, ®); -+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); -+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_3, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_4, ®); -+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); -+ rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); -+ rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_4, reg); -+} -+ -+static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_conf *libconf) -+{ -+ u32 reg; -+ -+ rt2x00pci_register_read(rt2x00dev, TX_RTY_CFG, ®); -+ rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, -+ libconf->conf->short_frame_max_tx_count); -+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, -+ libconf->conf->long_frame_max_tx_count); -+ rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); -+ rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); -+ rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); -+ rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); -+ rt2x00pci_register_write(rt2x00dev, TX_RTY_CFG, reg); -+} -+ -+static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_conf *libconf) -+{ -+ enum dev_state state = -+ (libconf->conf->flags & IEEE80211_CONF_PS) ? -+ STATE_SLEEP : STATE_AWAKE; -+ u32 reg; -+ -+ if (state == STATE_SLEEP) { -+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); -+ -+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, -+ libconf->conf->listen_interval - 1); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); -+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); -+ -+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); -+ } else { -+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); -+ -+ rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); -+ rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); -+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); -+ } -+} -+ -+static void rt2800pci_config(struct rt2x00_dev *rt2x00dev, -+ struct rt2x00lib_conf *libconf, -+ const unsigned int flags) -+{ -+ /* Always recalculate LNA gain before changing configuration */ -+ rt2800pci_config_lna_gain(rt2x00dev, libconf); -+ -+ if (flags & IEEE80211_CONF_CHANGE_CHANNEL) -+ rt2800pci_config_channel(rt2x00dev, libconf->conf, -+ &libconf->rf, &libconf->channel); -+ if (flags & IEEE80211_CONF_CHANGE_POWER) -+ rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level); -+ if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) -+ rt2800pci_config_retry_limit(rt2x00dev, libconf); -+ if (flags & IEEE80211_CONF_CHANGE_PS) -+ rt2800pci_config_ps(rt2x00dev, libconf); -+} -+ -+/* -+ * Link tuning -+ */ -+static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev, -+ struct link_qual *qual) -+{ -+ u32 reg; -+ -+ /* -+ * Update FCS error count from register. -+ */ -+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®); -+ qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -+} -+ -+static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev) -+{ -+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) -+ return 0x2e + rt2x00dev->lna_gain; -+ -+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) -+ return 0x32 + (rt2x00dev->lna_gain * 5) / 3; -+ else -+ return 0x3a + (rt2x00dev->lna_gain * 5) / 3; -+} -+ -+static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev, -+ struct link_qual *qual, u8 vgc_level) -+{ -+ if (qual->vgc_level != vgc_level) { -+ rt2800pci_bbp_write(rt2x00dev, 66, vgc_level); -+ qual->vgc_level = vgc_level; -+ qual->vgc_level_reg = vgc_level; -+ } -+} -+ -+static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev, -+ struct link_qual *qual) -+{ -+ rt2800pci_set_vgc(rt2x00dev, qual, -+ rt2800pci_get_default_vgc(rt2x00dev)); -+} -+ -+static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev, -+ struct link_qual *qual, const u32 count) -+{ -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) -+ return; -+ -+ /* -+ * When RSSI is better then -80 increase VGC level with 0x10 -+ */ -+ rt2800pci_set_vgc(rt2x00dev, qual, -+ rt2800pci_get_default_vgc(rt2x00dev) + -+ ((qual->rssi > -80) * 0x10)); -+} -+ -+/* -+ * Firmware functions -+ */ -+static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) -+{ -+ return FIRMWARE_RT2860; -+} -+ -+static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev, -+ const u8 *data, const size_t len) -+{ -+ u16 fw_crc; -+ u16 crc; -+ -+ /* -+ * Only support 8kb firmware files. -+ */ -+ if (len != 8192) -+ return FW_BAD_LENGTH; -+ -+ /* -+ * The last 2 bytes in the firmware array are the crc checksum itself, -+ * this means that we should never pass those 2 bytes to the crc -+ * algorithm. -+ */ -+ fw_crc = (data[len - 2] << 8 | data[len - 1]); -+ -+ /* -+ * Use the crc ccitt algorithm. -+ * This will return the same value as the legacy driver which -+ * used bit ordering reversion on the both the firmware bytes -+ * before input input as well as on the final output. -+ * Obviously using crc ccitt directly is much more efficient. -+ */ -+ crc = crc_ccitt(~0, data, len - 2); -+ -+ /* -+ * There is a small difference between the crc-itu-t + bitrev and -+ * the crc-ccitt crc calculation. In the latter method the 2 bytes -+ * will be swapped, use swab16 to convert the crc to the correct -+ * value. -+ */ -+ crc = swab16(crc); -+ -+ return (fw_crc == crc) ? FW_OK : FW_BAD_CRC; -+} -+ -+static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev, -+ const u8 *data, const size_t len) -+{ -+ unsigned int i; -+ u32 reg; -+ -+ /* -+ * Wait for stable hardware. -+ */ -+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { -+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); -+ if (reg && reg != ~0) -+ break; -+ msleep(1); -+ } -+ -+ if (i == REGISTER_BUSY_COUNT) { -+ ERROR(rt2x00dev, "Unstable hardware.\n"); -+ return -EBUSY; -+ } -+ -+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); -+ rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); -+ -+ /* -+ * Disable DMA, will be reenabled later when enabling -+ * the radio. -+ */ -+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); -+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); -+ -+ /* -+ * enable Host program ram write selection -+ */ -+ reg = 0; -+ rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1); -+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg); -+ -+ /* -+ * Write firmware to device. -+ */ -+ rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, -+ data, len); -+ -+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000); -+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001); -+ -+ /* -+ * Wait for device to stabilize. -+ */ -+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { -+ rt2x00pci_register_read(rt2x00dev, PBF_SYS_CTRL, ®); -+ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) -+ break; -+ msleep(1); -+ } -+ -+ if (i == REGISTER_BUSY_COUNT) { -+ ERROR(rt2x00dev, "PBF system register not ready.\n"); -+ return -EBUSY; -+ } -+ -+ /* -+ * Disable interrupts -+ */ -+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF); -+ -+ /* -+ * Initialize BBP R/W access agent -+ */ -+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0); -+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); -+ -+ return 0; -+} -+ -+/* -+ * Initialization functions. -+ */ -+static bool rt2800pci_get_entry_state(struct queue_entry *entry) -+{ -+ struct queue_entry_priv_pci *entry_priv = entry->priv_data; -+ u32 word; -+ -+ if (entry->queue->qid == QID_RX) { -+ rt2x00_desc_read(entry_priv->desc, 1, &word); -+ -+ return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE)); -+ } else { -+ rt2x00_desc_read(entry_priv->desc, 1, &word); -+ -+ return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE)); -+ } -+} -+ -+static void rt2800pci_clear_entry(struct queue_entry *entry) -+{ -+ struct queue_entry_priv_pci *entry_priv = entry->priv_data; -+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); -+ u32 word; -+ -+ if (entry->queue->qid == QID_RX) { -+ rt2x00_desc_read(entry_priv->desc, 0, &word); -+ rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma); -+ rt2x00_desc_write(entry_priv->desc, 0, word); -+ -+ rt2x00_desc_read(entry_priv->desc, 1, &word); -+ rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0); -+ rt2x00_desc_write(entry_priv->desc, 1, word); -+ } else { -+ rt2x00_desc_read(entry_priv->desc, 1, &word); -+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1); -+ rt2x00_desc_write(entry_priv->desc, 1, word); -+ } -+} -+ -+static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev) -+{ -+ struct queue_entry_priv_pci *entry_priv; -+ u32 reg; -+ -+ /* -+ * Initialize registers. -+ */ -+ entry_priv = rt2x00dev->tx[0].entries[0].priv_data; -+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma); -+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit); -+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0); -+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0); -+ -+ entry_priv = rt2x00dev->tx[1].entries[0].priv_data; -+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma); -+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit); -+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0); -+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0); -+ -+ entry_priv = rt2x00dev->tx[2].entries[0].priv_data; -+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma); -+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit); -+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0); -+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0); -+ -+ entry_priv = rt2x00dev->tx[3].entries[0].priv_data; -+ rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma); -+ rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit); -+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0); -+ rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0); -+ -+ entry_priv = rt2x00dev->rx->entries[0].priv_data; -+ rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); -+ rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); -+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1); -+ rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0); -+ -+ /* -+ * Enable global DMA configuration -+ */ -+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); -+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0); -+ -+ return 0; -+} -+ -+static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev) -+{ -+ u32 reg; -+ unsigned int i; -+ -+ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); -+ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); -+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); -+ -+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); -+ -+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); -+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); -+ -+ rt2x00pci_register_read(rt2x00dev, BCN_OFFSET0, ®); -+ rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ -+ rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ -+ rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ -+ rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ -+ rt2x00pci_register_write(rt2x00dev, BCN_OFFSET0, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, BCN_OFFSET1, ®); -+ rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ -+ rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ -+ rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ -+ rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ -+ rt2x00pci_register_write(rt2x00dev, BCN_OFFSET1, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); -+ rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); -+ -+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); -+ -+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); -+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); -+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); -+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); -+ rt2x00pci_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_LINK_CFG, ®); -+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); -+ rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); -+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); -+ rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); -+ rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); -+ rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); -+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); -+ rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); -+ rt2x00pci_register_write(rt2x00dev, TX_LINK_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); -+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); -+ rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); -+ rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, ®); -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); -+ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && -+ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); -+ else -+ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); -+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); -+ rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); -+ rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); -+ -+ rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®); -+ rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); -+ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); -+ rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); -+ rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); -+ rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); -+ rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®); -+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); -+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); -+ rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); -+ rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); -+ rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); -+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®); -+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); -+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); -+ rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); -+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); -+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); -+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); -+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); -+ rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); -+ rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®); -+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); -+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); -+ rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); -+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); -+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); -+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); -+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); -+ rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); -+ rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®); -+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); -+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); -+ rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); -+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); -+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); -+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); -+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); -+ rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); -+ rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®); -+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); -+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); -+ rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); -+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); -+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); -+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); -+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); -+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); -+ rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); -+ rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); -+ rt2x00pci_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®); -+ rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); -+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, -+ IEEE80211_MAX_RTS_THRESHOLD); -+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); -+ rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); -+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); -+ -+ /* -+ * ASIC will keep garbage value after boot, clear encryption keys. -+ */ -+ for (i = 0; i < 256; i++) { -+ u32 wcid[2] = { 0xffffffff, 0x00ffffff }; -+ rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), -+ wcid, sizeof(wcid)); -+ -+ rt2x00pci_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); -+ rt2x00pci_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); -+ } -+ -+ for (i = 0; i < 16; i++) -+ rt2x00pci_register_write(rt2x00dev, -+ SHARED_KEY_MODE_ENTRY(i), 0); -+ -+ /* -+ * Clear all beacons -+ * For the Beacon base registers we only need to clear -+ * the first byte since that byte contains the VALID and OWNER -+ * bits which (when set to 0) will invalidate the entire beacon. -+ */ -+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); -+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); -+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); -+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); -+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE4, 0); -+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE5, 0); -+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE6, 0); -+ rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE7, 0); -+ -+ rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG0, ®); -+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); -+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); -+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); -+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); -+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); -+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); -+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); -+ rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); -+ rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG0, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG1, ®); -+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); -+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); -+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); -+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); -+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); -+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); -+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); -+ rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); -+ rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG1, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG0, ®); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 3); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); -+ rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); -+ rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG0, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG1, ®); -+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); -+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); -+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); -+ rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); -+ rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG1, reg); -+ -+ /* -+ * We must clear the error counters. -+ * These registers are cleared on read, -+ * so we may pass a useless variable to store the value. -+ */ -+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®); -+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT1, ®); -+ rt2x00pci_register_read(rt2x00dev, RX_STA_CNT2, ®); -+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT0, ®); -+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT1, ®); -+ rt2x00pci_register_read(rt2x00dev, TX_STA_CNT2, ®); -+ -+ return 0; -+} -+ -+static int rt2800pci_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) -+{ -+ unsigned int i; -+ u32 reg; -+ -+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { -+ rt2x00pci_register_read(rt2x00dev, MAC_STATUS_CFG, ®); -+ if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) -+ return 0; -+ -+ udelay(REGISTER_BUSY_DELAY); -+ } -+ -+ ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); -+ return -EACCES; -+} -+ -+static int rt2800pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -+{ -+ unsigned int i; -+ u8 value; -+ -+ /* -+ * BBP was enabled after firmware was loaded, -+ * but we need to reactivate it now. -+ */ -+ rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0); -+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); -+ msleep(1); -+ -+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { -+ rt2800pci_bbp_read(rt2x00dev, 0, &value); -+ if ((value != 0xff) && (value != 0x00)) -+ return 0; -+ udelay(REGISTER_BUSY_DELAY); -+ } -+ -+ ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); -+ return -EACCES; -+} -+ -+static int rt2800pci_init_bbp(struct rt2x00_dev *rt2x00dev) -+{ -+ unsigned int i; -+ u16 eeprom; -+ u8 reg_id; -+ u8 value; -+ -+ if (unlikely(rt2800pci_wait_bbp_rf_ready(rt2x00dev) || -+ rt2800pci_wait_bbp_ready(rt2x00dev))) -+ return -EACCES; -+ -+ rt2800pci_bbp_write(rt2x00dev, 65, 0x2c); -+ rt2800pci_bbp_write(rt2x00dev, 66, 0x38); -+ rt2800pci_bbp_write(rt2x00dev, 69, 0x12); -+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a); -+ rt2800pci_bbp_write(rt2x00dev, 73, 0x10); -+ rt2800pci_bbp_write(rt2x00dev, 81, 0x37); -+ rt2800pci_bbp_write(rt2x00dev, 82, 0x62); -+ rt2800pci_bbp_write(rt2x00dev, 83, 0x6a); -+ rt2800pci_bbp_write(rt2x00dev, 84, 0x99); -+ rt2800pci_bbp_write(rt2x00dev, 86, 0x00); -+ rt2800pci_bbp_write(rt2x00dev, 91, 0x04); -+ rt2800pci_bbp_write(rt2x00dev, 92, 0x00); -+ rt2800pci_bbp_write(rt2x00dev, 103, 0x00); -+ rt2800pci_bbp_write(rt2x00dev, 105, 0x05); -+ -+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { -+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16); -+ rt2800pci_bbp_write(rt2x00dev, 73, 0x12); -+ } -+ -+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) -+ rt2800pci_bbp_write(rt2x00dev, 84, 0x19); -+ -+ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) { -+ rt2800pci_bbp_write(rt2x00dev, 31, 0x08); -+ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e); -+ rt2800pci_bbp_write(rt2x00dev, 80, 0x08); -+ } -+ -+ for (i = 0; i < EEPROM_BBP_SIZE; i++) { -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); -+ -+ if (eeprom != 0xffff && eeprom != 0x0000) { -+ reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); -+ value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); -+ rt2800pci_bbp_write(rt2x00dev, reg_id, value); -+ } -+ } -+ -+ return 0; -+} -+ -+static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev, -+ bool bw40, u8 rfcsr24, u8 filter_target) -+{ -+ unsigned int i; -+ u8 bbp; -+ u8 rfcsr; -+ u8 passband; -+ u8 stopband; -+ u8 overtuned = 0; -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ -+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); -+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); -+ rt2800pci_bbp_write(rt2x00dev, 4, bbp); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); -+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); -+ -+ /* -+ * Set power & frequency of passband test tone -+ */ -+ rt2800pci_bbp_write(rt2x00dev, 24, 0); -+ -+ for (i = 0; i < 100; i++) { -+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90); -+ msleep(1); -+ -+ rt2800pci_bbp_read(rt2x00dev, 55, &passband); -+ if (passband) -+ break; -+ } -+ -+ /* -+ * Set power & frequency of stopband test tone -+ */ -+ rt2800pci_bbp_write(rt2x00dev, 24, 0x06); -+ -+ for (i = 0; i < 100; i++) { -+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90); -+ msleep(1); -+ -+ rt2800pci_bbp_read(rt2x00dev, 55, &stopband); -+ -+ if ((passband - stopband) <= filter_target) { -+ rfcsr24++; -+ overtuned += ((passband - stopband) == filter_target); -+ } else -+ break; -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ } -+ -+ rfcsr24 -= !!overtuned; -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); -+ return rfcsr24; -+} -+ -+static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev) -+{ -+ u8 rfcsr; -+ u8 bbp; -+ -+ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3021) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3022)) -+ return 0; -+ -+ /* -+ * Init RF calibration. -+ */ -+ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); -+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); -+ msleep(1); -+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); -+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); -+ -+ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50); -+ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01); -+ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7); -+ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75); -+ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40); -+ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03); -+ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02); -+ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50); -+ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39); -+ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f); -+ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60); -+ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21); -+ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75); -+ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75); -+ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90); -+ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58); -+ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3); -+ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92); -+ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c); -+ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02); -+ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba); -+ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb); -+ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00); -+ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31); -+ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08); -+ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01); -+ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25); -+ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23); -+ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13); -+ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83); -+ -+ /* -+ * Set RX Filter calibration for 20MHz and 40MHz -+ */ -+ rt2x00dev->calibration[0] = -+ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16); -+ rt2x00dev->calibration[1] = -+ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19); -+ -+ /* -+ * Set back to initial state -+ */ -+ rt2800pci_bbp_write(rt2x00dev, 24, 0); -+ -+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); -+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); -+ -+ /* -+ * set BBP back to BW20 -+ */ -+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp); -+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); -+ rt2800pci_bbp_write(rt2x00dev, 4, bbp); -+ -+ return 0; -+} -+ -+/* -+ * Device state switch handlers. -+ */ -+static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev, -+ enum dev_state state) -+{ -+ u32 reg; -+ -+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, -+ (state == STATE_RADIO_RX_ON) || -+ (state == STATE_RADIO_RX_ON_LINK)); -+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); -+} -+ -+static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, -+ enum dev_state state) -+{ -+ int mask = (state == STATE_RADIO_IRQ_ON); -+ u32 reg; -+ -+ /* -+ * When interrupts are being enabled, the interrupt registers -+ * should clear the register to assure a clean state. -+ */ -+ if (state == STATE_RADIO_IRQ_ON) { -+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); -+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); -+ } -+ -+ rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®); -+ rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_AC0_DMA_DONE, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_AC1_DMA_DONE, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_AC2_DMA_DONE, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_AC3_DMA_DONE, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_HCCA_DMA_DONE, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_MGMT_DMA_DONE, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_MCU_COMMAND, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_RXTX_COHERENT, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_TBTT, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_PRE_TBTT, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_AUTO_WAKEUP, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask); -+ rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask); -+ rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg); -+} -+ -+static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) -+{ -+ unsigned int i; -+ u32 reg; -+ -+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { -+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); -+ if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && -+ !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) -+ return 0; -+ -+ msleep(1); -+ } -+ -+ ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n"); -+ return -EACCES; -+} -+ -+static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) -+{ -+ u32 reg; -+ u16 word; -+ -+ /* -+ * Initialize all registers. -+ */ -+ if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) || -+ rt2800pci_init_queues(rt2x00dev) || -+ rt2800pci_init_registers(rt2x00dev) || -+ rt2800pci_wait_wpdma_ready(rt2x00dev) || -+ rt2800pci_init_bbp(rt2x00dev) || -+ rt2800pci_init_rfcsr(rt2x00dev))) -+ return -EIO; -+ -+ /* -+ * Send signal to firmware during boot time. -+ */ -+ rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); -+ -+ /* -+ * Enable RX. -+ */ -+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); -+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); -+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); -+ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); -+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); -+ -+ /* -+ * Initialize LED control -+ */ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); -+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_1, 0xff, -+ word & 0xff, (word >> 8) & 0xff); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); -+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_2, 0xff, -+ word & 0xff, (word >> 8) & 0xff); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); -+ rt2800pci_mcu_request(rt2x00dev, MCU_LED_3, 0xff, -+ word & 0xff, (word >> 8) & 0xff); -+ -+ return 0; -+} -+ -+static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) -+{ -+ u32 reg; -+ -+ rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); -+ rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); -+ rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); -+ -+ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0); -+ rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0); -+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0); -+ -+ rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280); -+ -+ /* Wait for DMA, ignore error */ -+ rt2800pci_wait_wpdma_ready(rt2x00dev); -+} -+ -+static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, -+ enum dev_state state) -+{ -+ /* -+ * Always put the device to sleep (even when we intend to wakeup!) -+ * if the device is booting and wasn't asleep it will return -+ * failure when attempting to wakeup. -+ */ -+ rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); -+ -+ if (state == STATE_AWAKE) { -+ rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0); -+ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP); -+ } -+ -+ return 0; -+} -+ -+static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, -+ enum dev_state state) -+{ -+ int retval = 0; -+ -+ switch (state) { -+ case STATE_RADIO_ON: -+ /* -+ * Before the radio can be enabled, the device first has -+ * to be woken up. After that it needs a bit of time -+ * to be fully awake and then the radio can be enabled. -+ */ -+ rt2800pci_set_state(rt2x00dev, STATE_AWAKE); -+ msleep(1); -+ retval = rt2800pci_enable_radio(rt2x00dev); -+ break; -+ case STATE_RADIO_OFF: -+ /* -+ * After the radio has been disabled, the device should -+ * be put to sleep for powersaving. -+ */ -+ rt2800pci_disable_radio(rt2x00dev); -+ rt2800pci_set_state(rt2x00dev, STATE_SLEEP); -+ break; -+ case STATE_RADIO_RX_ON: -+ case STATE_RADIO_RX_ON_LINK: -+ case STATE_RADIO_RX_OFF: -+ case STATE_RADIO_RX_OFF_LINK: -+ rt2800pci_toggle_rx(rt2x00dev, state); -+ break; -+ case STATE_RADIO_IRQ_ON: -+ case STATE_RADIO_IRQ_OFF: -+ rt2800pci_toggle_irq(rt2x00dev, state); -+ break; -+ case STATE_DEEP_SLEEP: -+ case STATE_SLEEP: -+ case STATE_STANDBY: -+ case STATE_AWAKE: -+ retval = rt2800pci_set_state(rt2x00dev, state); -+ break; -+ default: -+ retval = -ENOTSUPP; -+ break; -+ } -+ -+ if (unlikely(retval)) -+ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", -+ state, retval); -+ -+ return retval; -+} -+ -+/* -+ * TX descriptor initialization -+ */ -+static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, -+ struct sk_buff *skb, -+ struct txentry_desc *txdesc) -+{ -+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); -+ __le32 *txd = skbdesc->desc; -+ __le32 *txwi = (__le32 *)(skb->data - rt2x00dev->hw->extra_tx_headroom); -+ u32 word; -+ -+ /* -+ * Initialize TX Info descriptor -+ */ -+ rt2x00_desc_read(txwi, 0, &word); -+ rt2x00_set_field32(&word, TXWI_W0_FRAG, -+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0); -+ rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0); -+ rt2x00_set_field32(&word, TXWI_W0_TS, -+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXWI_W0_AMPDU, -+ test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density); -+ rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs); -+ rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs); -+ rt2x00_set_field32(&word, TXWI_W0_BW, -+ test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXWI_W0_SHORT_GI, -+ test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc); -+ rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode); -+ rt2x00_desc_write(txwi, 0, word); -+ -+ rt2x00_desc_read(txwi, 1, &word); -+ rt2x00_set_field32(&word, TXWI_W1_ACK, -+ test_bit(ENTRY_TXD_ACK, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXWI_W1_NSEQ, -+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); -+ rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, -+ test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? -+ txdesc->key_idx : 0xff); -+ rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, -+ skb->len - txdesc->l2pad); -+ rt2x00_set_field32(&word, TXWI_W1_PACKETID, -+ skbdesc->entry->queue->qid); -+ rt2x00_desc_write(txwi, 1, word); -+ -+ /* -+ * Always write 0 to IV/EIV fields, hardware will insert the IV -+ * from the IVEIV register when ENTRY_TXD_ENCRYPT_IV is set to 0. -+ * When ENTRY_TXD_ENCRYPT_IV is set to 1 it will use the IV data -+ * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which -+ * crypto entry in the registers should be used to encrypt the frame. -+ */ -+ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */); -+ _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */); -+ -+ /* -+ * Initialize TX descriptor -+ */ -+ rt2x00_desc_read(txd, 0, &word); -+ rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma); -+ rt2x00_desc_write(txd, 0, word); -+ -+ rt2x00_desc_read(txd, 1, &word); -+ rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len); -+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC1, 1); -+ rt2x00_set_field32(&word, TXD_W1_BURST, -+ test_bit(ENTRY_TXD_BURST, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXD_W1_SD_LEN0, -+ rt2x00dev->hw->extra_tx_headroom); -+ rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, -+ !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0); -+ rt2x00_desc_write(txd, 1, word); -+ -+ rt2x00_desc_read(txd, 2, &word); -+ rt2x00_set_field32(&word, TXD_W2_SD_PTR1, -+ skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom); -+ rt2x00_desc_write(txd, 2, word); -+ -+ rt2x00_desc_read(txd, 3, &word); -+ rt2x00_set_field32(&word, TXD_W3_WIV, -+ !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); -+ rt2x00_set_field32(&word, TXD_W3_QSEL, 2); -+ rt2x00_desc_write(txd, 3, word); -+} -+ -+/* -+ * TX data initialization -+ */ -+static void rt2800pci_write_beacon(struct queue_entry *entry) -+{ -+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; -+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); -+ unsigned int beacon_base; -+ u32 reg; -+ -+ /* -+ * Disable beaconing while we are reloading the beacon data, -+ * otherwise we might be sending out invalid data. -+ */ -+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); -+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); -+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); -+ -+ /* -+ * Write entire beacon with descriptor to register. -+ */ -+ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); -+ rt2x00pci_register_multiwrite(rt2x00dev, -+ beacon_base, -+ skbdesc->desc, skbdesc->desc_len); -+ rt2x00pci_register_multiwrite(rt2x00dev, -+ beacon_base + skbdesc->desc_len, -+ entry->skb->data, entry->skb->len); -+ -+ /* -+ * Clean up beacon skb. -+ */ -+ dev_kfree_skb_any(entry->skb); -+ entry->skb = NULL; -+} -+ -+static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, -+ const enum data_queue_qid queue_idx) -+{ -+ struct data_queue *queue; -+ unsigned int idx, qidx = 0; -+ u32 reg; -+ -+ if (queue_idx == QID_BEACON) { -+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); -+ if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { -+ rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); -+ rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); -+ rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); -+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); -+ } -+ return; -+ } -+ -+ if (queue_idx > QID_HCCA && queue_idx != QID_MGMT) -+ return; -+ -+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); -+ idx = queue->index[Q_INDEX]; -+ -+ if (queue_idx == QID_MGMT) -+ qidx = 5; -+ else -+ qidx = queue_idx; -+ -+ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx); -+} -+ -+static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, -+ const enum data_queue_qid qid) -+{ -+ u32 reg; -+ -+ if (qid == QID_BEACON) { -+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, 0); -+ return; -+ } -+ -+ rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE)); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK)); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI)); -+ rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO)); -+ rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg); -+} -+ -+/* -+ * RX control handlers -+ */ -+static void rt2800pci_fill_rxdone(struct queue_entry *entry, -+ struct rxdone_entry_desc *rxdesc) -+{ -+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; -+ struct queue_entry_priv_pci *entry_priv = entry->priv_data; -+ __le32 *rxd = entry_priv->desc; -+ __le32 *rxwi = (__le32 *)entry->skb->data; -+ u32 rxd3; -+ u32 rxwi0; -+ u32 rxwi1; -+ u32 rxwi2; -+ u32 rxwi3; -+ -+ rt2x00_desc_read(rxd, 3, &rxd3); -+ rt2x00_desc_read(rxwi, 0, &rxwi0); -+ rt2x00_desc_read(rxwi, 1, &rxwi1); -+ rt2x00_desc_read(rxwi, 2, &rxwi2); -+ rt2x00_desc_read(rxwi, 3, &rxwi3); -+ -+ if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR)) -+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; -+ -+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { -+ /* -+ * Unfortunately we don't know the cipher type used during -+ * decryption. This prevents us from correct providing -+ * correct statistics through debugfs. -+ */ -+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF); -+ rxdesc->cipher_status = -+ rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR); -+ } -+ -+ if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) { -+ /* -+ * Hardware has stripped IV/EIV data from 802.11 frame during -+ * decryption. Unfortunately the descriptor doesn't contain -+ * any fields with the EIV/IV data either, so they can't -+ * be restored by rt2x00lib. -+ */ -+ rxdesc->flags |= RX_FLAG_IV_STRIPPED; -+ -+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) -+ rxdesc->flags |= RX_FLAG_DECRYPTED; -+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) -+ rxdesc->flags |= RX_FLAG_MMIC_ERROR; -+ } -+ -+ if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS)) -+ rxdesc->dev_flags |= RXDONE_MY_BSS; -+ -+ if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) -+ rxdesc->dev_flags |= RXDONE_L2PAD; -+ -+ if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI)) -+ rxdesc->flags |= RX_FLAG_SHORT_GI; -+ -+ if (rt2x00_get_field32(rxwi1, RXWI_W1_BW)) -+ rxdesc->flags |= RX_FLAG_40MHZ; -+ -+ /* -+ * Detect RX rate, always use MCS as signal type. -+ */ -+ rxdesc->dev_flags |= RXDONE_SIGNAL_MCS; -+ rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE); -+ rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS); -+ -+ /* -+ * Mask of 0x8 bit to remove the short preamble flag. -+ */ -+ if (rxdesc->rate_mode == RATE_MODE_CCK) -+ rxdesc->signal &= ~0x8; -+ -+ rxdesc->rssi = -+ (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + -+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; -+ -+ rxdesc->noise = -+ (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + -+ rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2; -+ -+ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); -+ -+ /* -+ * Set RX IDX in register to inform hardware that we have handled -+ * this entry and it is available for reuse again. -+ */ -+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); -+ -+ /* -+ * Remove TXWI descriptor from start of buffer. -+ */ -+ skb_pull(entry->skb, RXWI_DESC_SIZE); -+ skb_trim(entry->skb, rxdesc->size); -+} -+ -+/* -+ * Interrupt functions. -+ */ -+static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) -+{ -+ struct data_queue *queue; -+ struct queue_entry *entry; -+ struct queue_entry *entry_done; -+ struct queue_entry_priv_pci *entry_priv; -+ struct txdone_entry_desc txdesc; -+ u32 word; -+ u32 reg; -+ u32 old_reg; -+ int type; -+ int index; -+ -+ /* -+ * During each loop we will compare the freshly read -+ * TX_STA_FIFO register value with the value read from -+ * the previous loop. If the 2 values are equal then -+ * we should stop processing because the chance it -+ * quite big that the device has been unplugged and -+ * we risk going into an endless loop. -+ */ -+ old_reg = 0; -+ -+ while (1) { -+ rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, ®); -+ if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) -+ break; -+ -+ if (old_reg == reg) -+ break; -+ old_reg = reg; -+ -+ /* -+ * Skip this entry when it contains an invalid -+ * queue identication number. -+ */ -+ type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); -+ queue = rt2x00queue_get_queue(rt2x00dev, type); -+ if (unlikely(!queue)) -+ continue; -+ -+ /* -+ * Skip this entry when it contains an invalid -+ * index number. -+ */ -+ index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); -+ if (unlikely(index >= queue->limit)) -+ continue; -+ -+ entry = &queue->entries[index]; -+ entry_priv = entry->priv_data; -+ rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word); -+ -+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); -+ while (entry != entry_done) { -+ /* -+ * Catch up. -+ * Just report any entries we missed as failed. -+ */ -+ WARNING(rt2x00dev, -+ "TX status report missed for entry %d\n", -+ entry_done->entry_idx); -+ -+ txdesc.flags = 0; -+ __set_bit(TXDONE_UNKNOWN, &txdesc.flags); -+ txdesc.retry = 0; -+ -+ rt2x00lib_txdone(entry_done, &txdesc); -+ entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); -+ } -+ -+ /* -+ * Obtain the status about this packet. -+ */ -+ txdesc.flags = 0; -+ if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) -+ __set_bit(TXDONE_SUCCESS, &txdesc.flags); -+ else -+ __set_bit(TXDONE_FAILURE, &txdesc.flags); -+ txdesc.retry = rt2x00_get_field32(word, TXWI_W0_MCS); -+ -+ rt2x00lib_txdone(entry, &txdesc); -+ } -+} -+ -+static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) -+{ -+ struct rt2x00_dev *rt2x00dev = dev_instance; -+ u32 reg; -+ -+ /* Read status and ACK all interrupts */ -+ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); -+ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); -+ -+ if (!reg) -+ return IRQ_NONE; -+ -+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) -+ return IRQ_HANDLED; -+ -+ /* -+ * 1 - Rx ring done interrupt. -+ */ -+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE)) -+ rt2x00pci_rxdone(rt2x00dev); -+ -+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) -+ rt2800pci_txdone(rt2x00dev); -+ -+ return IRQ_HANDLED; -+} -+ -+/* -+ * Device probe functions. -+ */ -+static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) -+{ -+ u16 word; -+ u8 *mac; -+ u8 default_lna_gain; -+ -+ /* -+ * Read EEPROM into buffer -+ */ -+ switch(rt2x00dev->chip.rt) { -+ case RT2880: -+ case RT3052: -+ rt2800pci_read_eeprom_soc(rt2x00dev); -+ break; -+ default: -+ rt2800pci_read_eeprom_pci(rt2x00dev); -+ break; -+ } -+ -+ /* -+ * Start validation of the data that has been read. -+ */ -+ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); -+ if (!is_valid_ether_addr(mac)) { -+ DECLARE_MAC_BUF(macbuf); -+ -+ random_ether_addr(mac); -+ EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); -+ } -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); -+ if (word == 0xffff) { -+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); -+ rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1); -+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); -+ EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); -+ } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) { -+ /* -+ * There is a max of 2 RX streams for RT2860 series -+ */ -+ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2) -+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); -+ } -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); -+ if (word == 0xffff) { -+ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0); -+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); -+ EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); -+ } -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); -+ if ((word & 0x00ff) == 0x00ff) { -+ rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); -+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE, -+ LED_MODE_TXRX_ACTIVITY); -+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8); -+ EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); -+ } -+ -+ /* -+ * During the LNA validation we are going to use -+ * lna0 as correct value. Note that EEPROM_LNA -+ * is never validated. -+ */ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word); -+ default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word); -+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10) -+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0); -+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10) -+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); -+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) -+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); -+ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || -+ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) -+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, -+ default_lna_gain); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word); -+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10) -+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0); -+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10) -+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); -+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) -+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); -+ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || -+ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) -+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, -+ default_lna_gain); -+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); -+ -+ return 0; -+} -+ -+static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -+{ -+ u32 reg; -+ u16 value; -+ u16 eeprom; -+ -+ /* -+ * Read EEPROM word for configuration. -+ */ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); -+ -+ /* -+ * Identify RF chipset. -+ */ -+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); -+ rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); -+ rt2x00_set_chip_rf(rt2x00dev, value, reg); -+ -+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2850) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2720) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2750) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3020) && -+ !rt2x00_rf(&rt2x00dev->chip, RF2020) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3021) && -+ !rt2x00_rf(&rt2x00dev->chip, RF3022)) { -+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); -+ return -ENODEV; -+ } -+ -+ /* -+ * Identify default antenna configuration. -+ */ -+ rt2x00dev->default_ant.tx = -+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH); -+ rt2x00dev->default_ant.rx = -+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH); -+ -+ /* -+ * Read frequency offset and RF programming sequence. -+ */ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); -+ rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); -+ -+ /* -+ * Read external LNA informations. -+ */ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); -+ -+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) -+ __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); -+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) -+ __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); -+ -+ /* -+ * Detect if this device has an hardware controlled radio. -+ */ -+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO)) -+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -+ -+ /* -+ * Store led settings, for correct led behaviour. -+ */ -+#ifdef CONFIG_RT2X00_LIB_LEDS -+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); -+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); -+ rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); -+#endif /* CONFIG_RT2X00_LIB_LEDS */ -+ -+ return 0; -+} -+ -+/* -+ * RF value list for rt2860 -+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750) -+ */ -+static const struct rf_channel rf_vals[] = { -+ { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b }, -+ { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f }, -+ { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b }, -+ { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f }, -+ { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b }, -+ { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f }, -+ { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b }, -+ { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f }, -+ { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b }, -+ { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f }, -+ { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b }, -+ { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f }, -+ { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b }, -+ { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 }, -+ -+ /* 802.11 UNI / HyperLan 2 */ -+ { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 }, -+ { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 }, -+ { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 }, -+ { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 }, -+ { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b }, -+ { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b }, -+ { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 }, -+ { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 }, -+ { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b }, -+ { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 }, -+ { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 }, -+ { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 }, -+ -+ /* 802.11 HyperLan 2 */ -+ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, -+ { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, -+ { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 }, -+ { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 }, -+ { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, -+ { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, -+ { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, -+ { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 }, -+ { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 }, -+ { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 }, -+ { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b }, -+ { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 }, -+ { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b }, -+ { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 }, -+ { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b }, -+ { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 }, -+ -+ /* 802.11 UNII */ -+ { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 }, -+ { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 }, -+ { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f }, -+ { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f }, -+ { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, -+ { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, -+ { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, -+ -+ /* 802.11 Japan */ -+ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, -+ { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 }, -+ { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b }, -+ { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 }, -+ { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 }, -+ { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b }, -+ { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, -+}; -+ -+static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -+{ -+ struct hw_mode_spec *spec = &rt2x00dev->spec; -+ struct channel_info *info; -+ char *tx_power1; -+ char *tx_power2; -+ unsigned int i; -+ u16 eeprom; -+ -+ /* -+ * Initialize all hw fields. -+ */ -+ rt2x00dev->hw->flags = -+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | -+ IEEE80211_HW_SIGNAL_DBM | -+ IEEE80211_HW_SUPPORTS_PS | -+ IEEE80211_HW_PS_NULLFUNC_STACK; -+ rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE; -+ -+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); -+ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, -+ rt2x00_eeprom_addr(rt2x00dev, -+ EEPROM_MAC_ADDR_0)); -+ -+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); -+ -+ /* -+ * Initialize hw_mode information. -+ */ -+ spec->supported_bands = SUPPORT_BAND_2GHZ; -+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; -+ -+ if (rt2x00_rf(&rt2x00dev->chip, RF2820) || -+ rt2x00_rf(&rt2x00dev->chip, RF2720) || -+ rt2x00_rf(&rt2x00dev->chip, RF3021) || -+ rt2x00_rf(&rt2x00dev->chip, RF3022)) { -+ spec->num_channels = 14; -+ spec->channels = rf_vals; -+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || -+ rt2x00_rf(&rt2x00dev->chip, RF2750)) { -+ spec->supported_bands |= SUPPORT_BAND_5GHZ; -+ spec->num_channels = ARRAY_SIZE(rf_vals); -+ spec->channels = rf_vals; -+ } -+ -+ /* -+ * Initialize HT information. -+ */ -+ spec->ht.ht_supported = true; -+ spec->ht.cap = -+ IEEE80211_HT_CAP_SUP_WIDTH_20_40 | -+ IEEE80211_HT_CAP_GRN_FLD | -+ IEEE80211_HT_CAP_SGI_20 | -+ IEEE80211_HT_CAP_SGI_40 | -+ IEEE80211_HT_CAP_TX_STBC | -+ IEEE80211_HT_CAP_RX_STBC | -+ IEEE80211_HT_CAP_PSMP_SUPPORT; -+ spec->ht.ampdu_factor = 3; -+ spec->ht.ampdu_density = 4; -+ spec->ht.mcs.tx_params = -+ IEEE80211_HT_MCS_TX_DEFINED | -+ IEEE80211_HT_MCS_TX_RX_DIFF | -+ ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) << -+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); -+ -+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) { -+ case 3: -+ spec->ht.mcs.rx_mask[2] = 0xff; -+ case 2: -+ spec->ht.mcs.rx_mask[1] = 0xff; -+ case 1: -+ spec->ht.mcs.rx_mask[0] = 0xff; -+ spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */ -+ break; -+ } -+ -+ /* -+ * Create channel information array -+ */ -+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL); -+ if (!info) -+ return -ENOMEM; -+ -+ spec->channels_info = info; -+ -+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); -+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); -+ -+ for (i = 0; i < 14; i++) { -+ info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); -+ info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); -+ } -+ -+ if (spec->num_channels > 14) { -+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); -+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); -+ -+ for (i = 14; i < spec->num_channels; i++) { -+ info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); -+ info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); -+ } -+ } -+ -+ return 0; -+} -+ -+static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) -+{ -+ int retval; -+ -+ /* -+ * Allocate eeprom data. -+ */ -+ retval = rt2800pci_validate_eeprom(rt2x00dev); -+ if (retval) -+ return retval; -+ -+ retval = rt2800pci_init_eeprom(rt2x00dev); -+ if (retval) -+ return retval; -+ -+ /* -+ * Initialize hw specifications. -+ */ -+ retval = rt2800pci_probe_hw_mode(rt2x00dev); -+ if (retval) -+ return retval; -+ -+ /* -+ * This device has multiple filters for control frames -+ * and has a separate filter for PS Poll frames. -+ */ -+ __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags); -+ __set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags); -+ -+ /* -+ * This device requires firmware. -+ */ -+ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) && -+ !rt2x00_rt(&rt2x00dev->chip, RT3052)) -+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); -+ __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); -+ __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); -+ if (!modparam_nohwcrypt) -+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); -+ -+ /* -+ * Set the rssi offset. -+ */ -+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; -+ -+ return 0; -+} -+ -+/* -+ * IEEE80211 stack callback functions. -+ */ -+static void rt2800pci_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, -+ u32 *iv32, u16 *iv16) -+{ -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ struct mac_iveiv_entry iveiv_entry; -+ u32 offset; -+ -+ offset = MAC_IVEIV_ENTRY(hw_key_idx); -+ rt2x00pci_register_multiread(rt2x00dev, offset, -+ &iveiv_entry, sizeof(iveiv_entry)); -+ -+ memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); -+ memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); -+} -+ -+static int rt2800pci_set_rts_threshold(struct ieee80211_hw *hw, u32 value) -+{ -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ u32 reg; -+ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); -+ -+ rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®); -+ rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); -+ rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®); -+ rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); -+ rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); -+ rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); -+ rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®); -+ rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); -+ rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®); -+ rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); -+ rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®); -+ rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); -+ rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®); -+ rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); -+ rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg); -+ -+ return 0; -+} -+ -+static int rt2800pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, -+ const struct ieee80211_tx_queue_params *params) -+{ -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ struct data_queue *queue; -+ struct rt2x00_field32 field; -+ int retval; -+ u32 reg; -+ u32 offset; -+ -+ /* -+ * First pass the configuration through rt2x00lib, that will -+ * update the queue settings and validate the input. After that -+ * we are free to update the registers based on the value -+ * in the queue parameter. -+ */ -+ retval = rt2x00mac_conf_tx(hw, queue_idx, params); -+ if (retval) -+ return retval; -+ -+ /* -+ * We only need to perform additional register initialization -+ * for WMM queues/ -+ */ -+ if (queue_idx >= 4) -+ return 0; -+ -+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); -+ -+ /* Update WMM TXOP register */ -+ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); -+ field.bit_offset = (queue_idx & 1) * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00pci_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00pci_register_write(rt2x00dev, offset, reg); -+ -+ /* Update WMM registers */ -+ field.bit_offset = queue_idx * 4; -+ field.bit_mask = 0xf << field.bit_offset; -+ -+ rt2x00pci_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); -+ rt2x00_set_field32(®, field, queue->aifs); -+ rt2x00pci_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); -+ rt2x00_set_field32(®, field, queue->cw_min); -+ rt2x00pci_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); -+ -+ rt2x00pci_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); -+ rt2x00_set_field32(®, field, queue->cw_max); -+ rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); -+ -+ /* Update EDCA registers */ -+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); -+ -+ rt2x00pci_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); -+ rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); -+ rt2x00pci_register_write(rt2x00dev, offset, reg); -+ -+ return 0; -+} -+ -+static u64 rt2800pci_get_tsf(struct ieee80211_hw *hw) -+{ -+ struct rt2x00_dev *rt2x00dev = hw->priv; -+ u64 tsf; -+ u32 reg; -+ -+ rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW1, ®); -+ tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; -+ rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW0, ®); -+ tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); -+ -+ return tsf; -+} -+ -+static const struct ieee80211_ops rt2800pci_mac80211_ops = { -+ .tx = rt2x00mac_tx, -+ .start = rt2x00mac_start, -+ .stop = rt2x00mac_stop, -+ .add_interface = rt2x00mac_add_interface, -+ .remove_interface = rt2x00mac_remove_interface, -+ .config = rt2x00mac_config, -+ .configure_filter = rt2x00mac_configure_filter, -+ .set_key = rt2x00mac_set_key, -+ .get_stats = rt2x00mac_get_stats, -+ .get_tkip_seq = rt2800pci_get_tkip_seq, -+ .set_rts_threshold = rt2800pci_set_rts_threshold, -+ .bss_info_changed = rt2x00mac_bss_info_changed, -+ .conf_tx = rt2800pci_conf_tx, -+ .get_tx_stats = rt2x00mac_get_tx_stats, -+ .get_tsf = rt2800pci_get_tsf, -+ .rfkill_poll = rt2x00mac_rfkill_poll, -+}; -+ -+static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { -+ .irq_handler = rt2800pci_interrupt, -+ .probe_hw = rt2800pci_probe_hw, -+ .get_firmware_name = rt2800pci_get_firmware_name, -+ .check_firmware = rt2800pci_check_firmware, -+ .load_firmware = rt2800pci_load_firmware, -+ .initialize = rt2x00pci_initialize, -+ .uninitialize = rt2x00pci_uninitialize, -+ .get_entry_state = rt2800pci_get_entry_state, -+ .clear_entry = rt2800pci_clear_entry, -+ .set_device_state = rt2800pci_set_device_state, -+ .rfkill_poll = rt2800pci_rfkill_poll, -+ .link_stats = rt2800pci_link_stats, -+ .reset_tuner = rt2800pci_reset_tuner, -+ .link_tuner = rt2800pci_link_tuner, -+ .write_tx_desc = rt2800pci_write_tx_desc, -+ .write_tx_data = rt2x00pci_write_tx_data, -+ .write_beacon = rt2800pci_write_beacon, -+ .kick_tx_queue = rt2800pci_kick_tx_queue, -+ .kill_tx_queue = rt2800pci_kill_tx_queue, -+ .fill_rxdone = rt2800pci_fill_rxdone, -+ .config_shared_key = rt2800pci_config_shared_key, -+ .config_pairwise_key = rt2800pci_config_pairwise_key, -+ .config_filter = rt2800pci_config_filter, -+ .config_intf = rt2800pci_config_intf, -+ .config_erp = rt2800pci_config_erp, -+ .config_ant = rt2800pci_config_ant, -+ .config = rt2800pci_config, -+}; -+ -+static const struct data_queue_desc rt2800pci_queue_rx = { -+ .entry_num = RX_ENTRIES, -+ .data_size = AGGREGATION_SIZE, -+ .desc_size = RXD_DESC_SIZE, -+ .priv_size = sizeof(struct queue_entry_priv_pci), -+}; -+ -+static const struct data_queue_desc rt2800pci_queue_tx = { -+ .entry_num = TX_ENTRIES, -+ .data_size = AGGREGATION_SIZE, -+ .desc_size = TXD_DESC_SIZE, -+ .priv_size = sizeof(struct queue_entry_priv_pci), -+}; -+ -+static const struct data_queue_desc rt2800pci_queue_bcn = { -+ .entry_num = 8 * BEACON_ENTRIES, -+ .data_size = 0, /* No DMA required for beacons */ -+ .desc_size = TXWI_DESC_SIZE, -+ .priv_size = sizeof(struct queue_entry_priv_pci), -+}; -+ -+static const struct rt2x00_ops rt2800pci_ops = { -+ .name = KBUILD_MODNAME, -+ .max_sta_intf = 1, -+ .max_ap_intf = 8, -+ .eeprom_size = EEPROM_SIZE, -+ .rf_size = RF_SIZE, -+ .tx_queues = NUM_TX_QUEUES, -+ .rx = &rt2800pci_queue_rx, -+ .tx = &rt2800pci_queue_tx, -+ .bcn = &rt2800pci_queue_bcn, -+ .lib = &rt2800pci_rt2x00_ops, -+ .hw = &rt2800pci_mac80211_ops, -+#ifdef CONFIG_RT2X00_LIB_DEBUGFS -+ .debugfs = &rt2800pci_rt2x00debug, -+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -+}; -+ -+/* -+ * RT2800pci module information. -+ */ -+static struct pci_device_id rt2800pci_device_table[] = { -+ /* Edimax */ -+ { PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1432, 0x7738), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ /* Awt */ -+ { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) }, -+ { 0, } -+}; -+ -+MODULE_AUTHOR(DRV_PROJECT); -+MODULE_VERSION(DRV_VERSION); -+MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); -+MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); -+#ifdef CONFIG_RT2800PCI_PCI -+MODULE_FIRMWARE(FIRMWARE_RT2860); -+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); -+#endif /* CONFIG_RT2800PCI_PCI */ -+MODULE_LICENSE("GPL"); -+ -+#ifdef CONFIG_RT2800PCI_WISOC -+#if defined(CONFIG_RALINK_RT288X) -+__rt2x00soc_probe(RT2880, &rt2800pci_ops); -+#elif defined(CONFIG_RALINK_RT305X) -+__rt2x00soc_probe(RT3052, &rt2800pci_ops); -+#endif -+ -+static struct platform_driver rt2800soc_driver = { -+ .driver = { -+ .name = "rt2800_wmac", -+ .owner = THIS_MODULE, -+ .mod_name = KBUILD_MODNAME, -+ }, -+ .probe = __rt2x00soc_probe, -+ .remove = __devexit_p(rt2x00soc_remove), -+ .suspend = rt2x00soc_suspend, -+ .resume = rt2x00soc_resume, -+}; -+#endif /* CONFIG_RT2800PCI_WISOC */ -+ -+#ifdef CONFIG_RT2800PCI_PCI -+static struct pci_driver rt2800pci_driver = { -+ .name = KBUILD_MODNAME, -+ .id_table = rt2800pci_device_table, -+ .probe = rt2x00pci_probe, -+ .remove = __devexit_p(rt2x00pci_remove), -+ .suspend = rt2x00pci_suspend, -+ .resume = rt2x00pci_resume, -+}; -+#endif /* CONFIG_RT2800PCI_PCI */ -+ -+static int __init rt2800pci_init(void) -+{ -+ int ret = 0; -+ -+#ifdef CONFIG_RT2800PCI_WISOC -+ ret = platform_driver_register(&rt2800soc_driver); -+ if (ret) -+ return ret; -+#endif -+#ifdef CONFIG_RT2800PCI_PCI -+ ret = pci_register_driver(&rt2800pci_driver); -+ if (ret) { -+#ifdef CONFIG_RT2800PCI_WISOC -+ platform_driver_unregister(&rt2800soc_driver); -+#endif -+ return ret; -+ } -+#endif -+ -+ return ret; -+} -+ -+static void __exit rt2800pci_exit(void) -+{ -+#ifdef CONFIG_RT2800PCI_PCI -+ pci_unregister_driver(&rt2800pci_driver); -+#endif -+#ifdef CONFIG_RT2800PCI_WISOC -+ platform_driver_unregister(&rt2800soc_driver); -+#endif -+} -+ -+module_init(rt2800pci_init); -+module_exit(rt2800pci_exit); ---- /dev/null -+++ b/drivers/net/wireless/rt2x00/rt2800pci.h -@@ -0,0 +1,1929 @@ -+/* -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project -+ <http://rt2x00.serialmonkey.com> -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the -+ Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ */ -+ -+/* -+ Module: rt2800pci -+ Abstract: Data structures and registers for the rt2800pci module. -+ Supported chipsets: RT2800E & RT2800ED. -+ */ -+ -+#ifndef RT2800PCI_H -+#define RT2800PCI_H -+ -+/* -+ * RF chip defines. -+ * -+ * RF2820 2.4G 2T3R -+ * RF2850 2.4G/5G 2T3R -+ * RF2720 2.4G 1T2R -+ * RF2750 2.4G/5G 1T2R -+ * RF3020 2.4G 1T1R -+ * RF2020 2.4G B/G -+ * RF3021 2.4G 1T2R -+ * RF3022 2.4G 2T2R -+ */ -+#define RF2820 0x0001 -+#define RF2850 0x0002 -+#define RF2720 0x0003 -+#define RF2750 0x0004 -+#define RF3020 0x0005 -+#define RF2020 0x0006 -+#define RF3021 0x0007 -+#define RF3022 0x0008 -+ -+/* -+ * RT2860 version -+ */ -+#define RT2860C_VERSION 0x28600100 -+#define RT2860D_VERSION 0x28600101 -+#define RT2880E_VERSION 0x28720200 -+#define RT2883_VERSION 0x28830300 -+#define RT3070_VERSION 0x30700200 -+ -+/* -+ * Signal information. -+ * Default offset is required for RSSI <-> dBm conversion. -+ */ -+#define DEFAULT_RSSI_OFFSET 120 /* FIXME */ -+ -+/* -+ * Register layout information. -+ */ -+#define CSR_REG_BASE 0x1000 -+#define CSR_REG_SIZE 0x0800 -+#define EEPROM_BASE 0x0000 -+#define EEPROM_SIZE 0x0110 -+#define BBP_BASE 0x0000 -+#define BBP_SIZE 0x0080 -+#define RF_BASE 0x0004 -+#define RF_SIZE 0x0010 -+ -+/* -+ * Number of TX queues. -+ */ -+#define NUM_TX_QUEUES 4 -+ -+/* -+ * PCI registers. -+ */ -+ -+/* -+ * E2PROM_CSR: EEPROM control register. -+ * RELOAD: Write 1 to reload eeprom content. -+ * TYPE: 0: 93c46, 1:93c66. -+ * LOAD_STATUS: 1:loading, 0:done. -+ */ -+#define E2PROM_CSR 0x0004 -+#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001) -+#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) -+#define E2PROM_CSR_DATA_IN FIELD32(0x00000004) -+#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) -+#define E2PROM_CSR_TYPE FIELD32(0x00000030) -+#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) -+#define E2PROM_CSR_RELOAD FIELD32(0x00000080) -+ -+/* -+ * HOST-MCU shared memory -+ */ -+#define HOST_CMD_CSR 0x0404 -+#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) -+ -+/* -+ * INT_SOURCE_CSR: Interrupt source register. -+ * Write one to clear corresponding bit. -+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c -+ */ -+#define INT_SOURCE_CSR 0x0200 -+#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) -+#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) -+#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) -+#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) -+#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) -+#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) -+#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) -+#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -+#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -+#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) -+#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) -+#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) -+#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) -+#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -+#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) -+#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) -+#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) -+#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) -+ -+/* -+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. -+ */ -+#define INT_MASK_CSR 0x0204 -+#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) -+#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) -+#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) -+#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) -+#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) -+#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) -+#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) -+#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -+#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -+#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) -+#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) -+#define INT_MASK_CSR_TBTT FIELD32(0x00000800) -+#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) -+#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -+#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) -+#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) -+#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) -+#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) -+ -+/* -+ * WPDMA_GLO_CFG -+ */ -+#define WPDMA_GLO_CFG 0x0208 -+#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) -+#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) -+#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) -+#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) -+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) -+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) -+#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) -+#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) -+#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) -+ -+/* -+ * WPDMA_RST_IDX -+ */ -+#define WPDMA_RST_IDX 0x020c -+#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) -+#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) -+#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) -+#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) -+#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) -+#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) -+#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) -+ -+/* -+ * DELAY_INT_CFG -+ */ -+#define DELAY_INT_CFG 0x0210 -+#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) -+#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) -+#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) -+#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) -+#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) -+#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) -+ -+/* -+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC -+ * AIFSN0: AC_BE -+ * AIFSN1: AC_BK -+ * AIFSN1: AC_VI -+ * AIFSN1: AC_VO -+ */ -+#define WMM_AIFSN_CFG 0x0214 -+#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) -+#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) -+#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) -+#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) -+ -+/* -+ * WMM_CWMIN_CSR: CWmin for each EDCA AC -+ * CWMIN0: AC_BE -+ * CWMIN1: AC_BK -+ * CWMIN1: AC_VI -+ * CWMIN1: AC_VO -+ */ -+#define WMM_CWMIN_CFG 0x0218 -+#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) -+#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) -+#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) -+#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) -+ -+/* -+ * WMM_CWMAX_CSR: CWmax for each EDCA AC -+ * CWMAX0: AC_BE -+ * CWMAX1: AC_BK -+ * CWMAX1: AC_VI -+ * CWMAX1: AC_VO -+ */ -+#define WMM_CWMAX_CFG 0x021c -+#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) -+#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) -+#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) -+#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) -+ -+/* -+ * AC_TXOP0: AC_BK/AC_BE TXOP register -+ * AC0TXOP: AC_BK in unit of 32us -+ * AC1TXOP: AC_BE in unit of 32us -+ */ -+#define WMM_TXOP0_CFG 0x0220 -+#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) -+#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) -+ -+/* -+ * AC_TXOP1: AC_VO/AC_VI TXOP register -+ * AC2TXOP: AC_VI in unit of 32us -+ * AC3TXOP: AC_VO in unit of 32us -+ */ -+#define WMM_TXOP1_CFG 0x0224 -+#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) -+#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) -+ -+/* -+ * GPIO_CTRL_CFG: -+ */ -+#define GPIO_CTRL_CFG 0x0228 -+#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) -+#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002) -+#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004) -+#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008) -+#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010) -+#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) -+#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) -+#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) -+#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100) -+ -+/* -+ * MCU_CMD_CFG -+ */ -+#define MCU_CMD_CFG 0x022c -+ -+/* -+ * AC_BK register offsets -+ */ -+#define TX_BASE_PTR0 0x0230 -+#define TX_MAX_CNT0 0x0234 -+#define TX_CTX_IDX0 0x0238 -+#define TX_DTX_IDX0 0x023c -+ -+/* -+ * AC_BE register offsets -+ */ -+#define TX_BASE_PTR1 0x0240 -+#define TX_MAX_CNT1 0x0244 -+#define TX_CTX_IDX1 0x0248 -+#define TX_DTX_IDX1 0x024c -+ -+/* -+ * AC_VI register offsets -+ */ -+#define TX_BASE_PTR2 0x0250 -+#define TX_MAX_CNT2 0x0254 -+#define TX_CTX_IDX2 0x0258 -+#define TX_DTX_IDX2 0x025c -+ -+/* -+ * AC_VO register offsets -+ */ -+#define TX_BASE_PTR3 0x0260 -+#define TX_MAX_CNT3 0x0264 -+#define TX_CTX_IDX3 0x0268 -+#define TX_DTX_IDX3 0x026c -+ -+/* -+ * HCCA register offsets -+ */ -+#define TX_BASE_PTR4 0x0270 -+#define TX_MAX_CNT4 0x0274 -+#define TX_CTX_IDX4 0x0278 -+#define TX_DTX_IDX4 0x027c -+ -+/* -+ * MGMT register offsets -+ */ -+#define TX_BASE_PTR5 0x0280 -+#define TX_MAX_CNT5 0x0284 -+#define TX_CTX_IDX5 0x0288 -+#define TX_DTX_IDX5 0x028c -+ -+/* -+ * Queue register offset macros -+ */ -+#define TX_QUEUE_REG_OFFSET 0x10 -+#define TX_BASE_PTR(__x) TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET) -+#define TX_MAX_CNT(__x) TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET) -+#define TX_CTX_IDX(__x) TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET) -+#define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET) -+ -+/* -+ * RX register offsets -+ */ -+#define RX_BASE_PTR 0x0290 -+#define RX_MAX_CNT 0x0294 -+#define RX_CRX_IDX 0x0298 -+#define RX_DRX_IDX 0x029c -+ -+/* -+ * PBF_SYS_CTRL -+ * HOST_RAM_WRITE: enable Host program ram write selection -+ */ -+#define PBF_SYS_CTRL 0x0400 -+#define PBF_SYS_CTRL_READY FIELD32(0x00000080) -+#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) -+ -+/* -+ * PBF registers -+ * Most are for debug. Driver doesn't touch PBF register. -+ */ -+#define PBF_CFG 0x0408 -+#define PBF_MAX_PCNT 0x040c -+#define PBF_CTRL 0x0410 -+#define PBF_INT_STA 0x0414 -+#define PBF_INT_ENA 0x0418 -+ -+/* -+ * BCN_OFFSET0: -+ */ -+#define BCN_OFFSET0 0x042c -+#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) -+#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) -+#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) -+#define BCN_OFFSET0_BCN3 FIELD32(0xff000000) -+ -+/* -+ * BCN_OFFSET1: -+ */ -+#define BCN_OFFSET1 0x0430 -+#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) -+#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) -+#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) -+#define BCN_OFFSET1_BCN7 FIELD32(0xff000000) -+ -+/* -+ * PBF registers -+ * Most are for debug. Driver doesn't touch PBF register. -+ */ -+#define TXRXQ_PCNT 0x0438 -+#define PBF_DBG 0x043c -+ -+/* -+ * RF registers -+ */ -+#define RF_CSR_CFG 0x0500 -+#define RF_CSR_CFG_DATA FIELD32(0x000000ff) -+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) -+#define RF_CSR_CFG_WRITE FIELD32(0x00010000) -+#define RF_CSR_CFG_BUSY FIELD32(0x00020000) -+ -+/* -+ * MAC Control/Status Registers(CSR). -+ * Some values are set in TU, whereas 1 TU == 1024 us. -+ */ -+ -+/* -+ * MAC_CSR0: ASIC revision number. -+ * ASIC_REV: 0 -+ * ASIC_VER: 2860 -+ */ -+#define MAC_CSR0 0x1000 -+#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff) -+#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000) -+ -+/* -+ * MAC_SYS_CTRL: -+ */ -+#define MAC_SYS_CTRL 0x1004 -+#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) -+#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) -+#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) -+#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) -+#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) -+#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) -+#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) -+#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) -+ -+/* -+ * MAC_ADDR_DW0: STA MAC register 0 -+ */ -+#define MAC_ADDR_DW0 0x1008 -+#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) -+#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) -+#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) -+#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) -+ -+/* -+ * MAC_ADDR_DW1: STA MAC register 1 -+ * UNICAST_TO_ME_MASK: -+ * Used to mask off bits from byte 5 of the MAC address -+ * to determine the UNICAST_TO_ME bit for RX frames. -+ * The full mask is complemented by BSS_ID_MASK: -+ * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK -+ */ -+#define MAC_ADDR_DW1 0x100c -+#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) -+#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) -+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) -+ -+/* -+ * MAC_BSSID_DW0: BSSID register 0 -+ */ -+#define MAC_BSSID_DW0 0x1010 -+#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) -+#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) -+#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) -+#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) -+ -+/* -+ * MAC_BSSID_DW1: BSSID register 1 -+ * BSS_ID_MASK: -+ * 0: 1-BSSID mode (BSS index = 0) -+ * 1: 2-BSSID mode (BSS index: Byte5, bit 0) -+ * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) -+ * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) -+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the -+ * BSSID. This will make sure that those bits will be ignored -+ * when determining the MY_BSS of RX frames. -+ */ -+#define MAC_BSSID_DW1 0x1014 -+#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) -+#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) -+#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) -+#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) -+ -+/* -+ * MAX_LEN_CFG: Maximum frame length register. -+ * MAX_MPDU: rt2860b max 16k bytes -+ * MAX_PSDU: Maximum PSDU length -+ * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 -+ */ -+#define MAX_LEN_CFG 0x1018 -+#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) -+#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) -+#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) -+#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) -+ -+/* -+ * BBP_CSR_CFG: BBP serial control register -+ * VALUE: Register value to program into BBP -+ * REG_NUM: Selected BBP register -+ * READ_CONTROL: 0 write BBP, 1 read BBP -+ * BUSY: ASIC is busy executing BBP commands -+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks -+ * BBP_RW_MODE: 0 serial, 1 paralell -+ */ -+#define BBP_CSR_CFG 0x101c -+#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) -+#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) -+#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) -+#define BBP_CSR_CFG_BUSY FIELD32(0x00020000) -+#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) -+#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) -+ -+/* -+ * RF_CSR_CFG0: RF control register -+ * REGID_AND_VALUE: Register value to program into RF -+ * BITWIDTH: Selected RF register -+ * STANDBYMODE: 0 high when standby, 1 low when standby -+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate -+ * BUSY: ASIC is busy executing RF commands -+ */ -+#define RF_CSR_CFG0 0x1020 -+#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) -+#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) -+#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) -+#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) -+#define RF_CSR_CFG0_SEL FIELD32(0x40000000) -+#define RF_CSR_CFG0_BUSY FIELD32(0x80000000) -+ -+/* -+ * RF_CSR_CFG1: RF control register -+ * REGID_AND_VALUE: Register value to program into RF -+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE -+ * 0: 3 system clock cycle (37.5usec) -+ * 1: 5 system clock cycle (62.5usec) -+ */ -+#define RF_CSR_CFG1 0x1024 -+#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) -+#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) -+ -+/* -+ * RF_CSR_CFG2: RF control register -+ * VALUE: Register value to program into RF -+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE -+ * 0: 3 system clock cycle (37.5usec) -+ * 1: 5 system clock cycle (62.5usec) -+ */ -+#define RF_CSR_CFG2 0x1028 -+#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) -+ -+/* -+ * LED_CFG: LED control -+ * color LED's: -+ * 0: off -+ * 1: blinking upon TX2 -+ * 2: periodic slow blinking -+ * 3: always on -+ * LED polarity: -+ * 0: active low -+ * 1: active high -+ */ -+#define LED_CFG 0x102c -+#define LED_CFG_ON_PERIOD FIELD32(0x000000ff) -+#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) -+#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) -+#define LED_CFG_R_LED_MODE FIELD32(0x03000000) -+#define LED_CFG_G_LED_MODE FIELD32(0x0c000000) -+#define LED_CFG_Y_LED_MODE FIELD32(0x30000000) -+#define LED_CFG_LED_POLAR FIELD32(0x40000000) -+ -+/* -+ * XIFS_TIME_CFG: MAC timing -+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX -+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX -+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX -+ * when MAC doesn't reference BBP signal BBRXEND -+ * EIFS: unit 1us -+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer -+ * -+ */ -+#define XIFS_TIME_CFG 0x1100 -+#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) -+#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) -+#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) -+#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) -+#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) -+ -+/* -+ * BKOFF_SLOT_CFG: -+ */ -+#define BKOFF_SLOT_CFG 0x1104 -+#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) -+#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) -+ -+/* -+ * NAV_TIME_CFG: -+ */ -+#define NAV_TIME_CFG 0x1108 -+#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) -+#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) -+#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) -+#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) -+ -+/* -+ * CH_TIME_CFG: count as channel busy -+ */ -+#define CH_TIME_CFG 0x110c -+ -+/* -+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us -+ */ -+#define PBF_LIFE_TIMER 0x1110 -+ -+/* -+ * BCN_TIME_CFG: -+ * BEACON_INTERVAL: in unit of 1/16 TU -+ * TSF_TICKING: Enable TSF auto counting -+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode -+ * BEACON_GEN: Enable beacon generator -+ */ -+#define BCN_TIME_CFG 0x1114 -+#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) -+#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) -+#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) -+#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) -+#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) -+#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) -+ -+/* -+ * TBTT_SYNC_CFG: -+ */ -+#define TBTT_SYNC_CFG 0x1118 -+ -+/* -+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only -+ */ -+#define TSF_TIMER_DW0 0x111c -+#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) -+ -+/* -+ * TSF_TIMER_DW1: Local msb TSF timer, read-only -+ */ -+#define TSF_TIMER_DW1 0x1120 -+#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) -+ -+/* -+ * TBTT_TIMER: TImer remains till next TBTT, read-only -+ */ -+#define TBTT_TIMER 0x1124 -+ -+/* -+ * INT_TIMER_CFG: -+ */ -+#define INT_TIMER_CFG 0x1128 -+ -+/* -+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable -+ */ -+#define INT_TIMER_EN 0x112c -+ -+/* -+ * CH_IDLE_STA: channel idle time -+ */ -+#define CH_IDLE_STA 0x1130 -+ -+/* -+ * CH_BUSY_STA: channel busy time -+ */ -+#define CH_BUSY_STA 0x1134 -+ -+/* -+ * MAC_STATUS_CFG: -+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable. -+ * if 1 or higher one of the 2 registers is busy. -+ */ -+#define MAC_STATUS_CFG 0x1200 -+#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) -+ -+/* -+ * PWR_PIN_CFG: -+ */ -+#define PWR_PIN_CFG 0x1204 -+ -+/* -+ * AUTOWAKEUP_CFG: Manual power control / status register -+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set -+ * AUTOWAKE: 0:sleep, 1:awake -+ */ -+#define AUTOWAKEUP_CFG 0x1208 -+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) -+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) -+#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) -+ -+/* -+ * EDCA_AC0_CFG: -+ */ -+#define EDCA_AC0_CFG 0x1300 -+#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) -+#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) -+#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) -+ -+/* -+ * EDCA_AC1_CFG: -+ */ -+#define EDCA_AC1_CFG 0x1304 -+#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) -+#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) -+#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) -+ -+/* -+ * EDCA_AC2_CFG: -+ */ -+#define EDCA_AC2_CFG 0x1308 -+#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) -+#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) -+#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) -+ -+/* -+ * EDCA_AC3_CFG: -+ */ -+#define EDCA_AC3_CFG 0x130c -+#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) -+#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) -+#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) -+#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) -+ -+/* -+ * EDCA_TID_AC_MAP: -+ */ -+#define EDCA_TID_AC_MAP 0x1310 -+ -+/* -+ * TX_PWR_CFG_0: -+ */ -+#define TX_PWR_CFG_0 0x1314 -+#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) -+#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) -+#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) -+#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) -+#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) -+#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) -+#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) -+#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) -+ -+/* -+ * TX_PWR_CFG_1: -+ */ -+#define TX_PWR_CFG_1 0x1318 -+#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) -+#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) -+#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) -+#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) -+#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) -+#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) -+#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) -+#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) -+ -+/* -+ * TX_PWR_CFG_2: -+ */ -+#define TX_PWR_CFG_2 0x131c -+#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) -+#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) -+#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) -+#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) -+#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) -+#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) -+#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) -+#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) -+ -+/* -+ * TX_PWR_CFG_3: -+ */ -+#define TX_PWR_CFG_3 0x1320 -+#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) -+#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) -+#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) -+#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) -+#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) -+#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) -+#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) -+#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) -+ -+/* -+ * TX_PWR_CFG_4: -+ */ -+#define TX_PWR_CFG_4 0x1324 -+#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) -+#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) -+#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) -+#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) -+ -+/* -+ * TX_PIN_CFG: -+ */ -+#define TX_PIN_CFG 0x1328 -+#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) -+#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) -+#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) -+#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) -+#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) -+#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) -+#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) -+#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) -+#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) -+#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) -+#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) -+#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) -+#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) -+#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) -+#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) -+#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) -+#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) -+#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) -+#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) -+#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) -+ -+/* -+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz -+ */ -+#define TX_BAND_CFG 0x132c -+#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) -+#define TX_BAND_CFG_A FIELD32(0x00000002) -+#define TX_BAND_CFG_BG FIELD32(0x00000004) -+ -+/* -+ * TX_SW_CFG0: -+ */ -+#define TX_SW_CFG0 0x1330 -+ -+/* -+ * TX_SW_CFG1: -+ */ -+#define TX_SW_CFG1 0x1334 -+ -+/* -+ * TX_SW_CFG2: -+ */ -+#define TX_SW_CFG2 0x1338 -+ -+/* -+ * TXOP_THRES_CFG: -+ */ -+#define TXOP_THRES_CFG 0x133c -+ -+/* -+ * TXOP_CTRL_CFG: -+ */ -+#define TXOP_CTRL_CFG 0x1340 -+ -+/* -+ * TX_RTS_CFG: -+ * RTS_THRES: unit:byte -+ * RTS_FBK_EN: enable rts rate fallback -+ */ -+#define TX_RTS_CFG 0x1344 -+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) -+#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) -+#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) -+ -+/* -+ * TX_TIMEOUT_CFG: -+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us -+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure -+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. -+ * it is recommended that: -+ * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) -+ */ -+#define TX_TIMEOUT_CFG 0x1348 -+#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) -+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) -+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) -+ -+/* -+ * TX_RTY_CFG: -+ * SHORT_RTY_LIMIT: short retry limit -+ * LONG_RTY_LIMIT: long retry limit -+ * LONG_RTY_THRE: Long retry threshoold -+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode -+ * 0:expired by retry limit, 1: expired by mpdu life timer -+ * AGG_RTY_MODE: Aggregate MPDU retry mode -+ * 0:expired by retry limit, 1: expired by mpdu life timer -+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable -+ */ -+#define TX_RTY_CFG 0x134c -+#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) -+#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) -+#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) -+#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) -+#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) -+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) -+ -+/* -+ * TX_LINK_CFG: -+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us -+ * MFB_ENABLE: TX apply remote MFB 1:enable -+ * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable -+ * 0: not apply remote remote unsolicit (MFS=7) -+ * TX_MRQ_EN: MCS request TX enable -+ * TX_RDG_EN: RDG TX enable -+ * TX_CF_ACK_EN: Piggyback CF-ACK enable -+ * REMOTE_MFB: remote MCS feedback -+ * REMOTE_MFS: remote MCS feedback sequence number -+ */ -+#define TX_LINK_CFG 0x1350 -+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) -+#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) -+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) -+#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) -+#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) -+#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) -+#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) -+#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) -+ -+/* -+ * HT_FBK_CFG0: -+ */ -+#define HT_FBK_CFG0 0x1354 -+#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) -+#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) -+#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) -+#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) -+#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) -+#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) -+#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) -+#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) -+ -+/* -+ * HT_FBK_CFG1: -+ */ -+#define HT_FBK_CFG1 0x1358 -+#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) -+#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) -+#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) -+#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) -+#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) -+#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) -+#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) -+#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) -+ -+/* -+ * LG_FBK_CFG0: -+ */ -+#define LG_FBK_CFG0 0x135c -+#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) -+#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) -+#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) -+#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) -+#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) -+#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) -+#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) -+#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) -+ -+/* -+ * LG_FBK_CFG1: -+ */ -+#define LG_FBK_CFG1 0x1360 -+#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) -+#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) -+#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) -+#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) -+ -+/* -+ * CCK_PROT_CFG: CCK Protection -+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) -+ * PROTECT_CTRL: Protection control frame type for CCK TX -+ * 0:none, 1:RTS/CTS, 2:CTS-to-self -+ * PROTECT_NAV: TXOP protection type for CCK TX -+ * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect -+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow -+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow -+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow -+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow -+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow -+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow -+ * RTS_TH_EN: RTS threshold enable on CCK TX -+ */ -+#define CCK_PROT_CFG 0x1364 -+#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -+#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -+#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -+#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) -+ -+/* -+ * OFDM_PROT_CFG: OFDM Protection -+ */ -+#define OFDM_PROT_CFG 0x1368 -+#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -+#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -+#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -+#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) -+ -+/* -+ * MM20_PROT_CFG: MM20 Protection -+ */ -+#define MM20_PROT_CFG 0x136c -+#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -+#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -+#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -+#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) -+ -+/* -+ * MM40_PROT_CFG: MM40 Protection -+ */ -+#define MM40_PROT_CFG 0x1370 -+#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -+#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -+#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -+#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) -+ -+/* -+ * GF20_PROT_CFG: GF20 Protection -+ */ -+#define GF20_PROT_CFG 0x1374 -+#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -+#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -+#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -+#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) -+ -+/* -+ * GF40_PROT_CFG: GF40 Protection -+ */ -+#define GF40_PROT_CFG 0x1378 -+#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -+#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -+#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -+#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) -+ -+/* -+ * EXP_CTS_TIME: -+ */ -+#define EXP_CTS_TIME 0x137c -+ -+/* -+ * EXP_ACK_TIME: -+ */ -+#define EXP_ACK_TIME 0x1380 -+ -+/* -+ * RX_FILTER_CFG: RX configuration register. -+ */ -+#define RX_FILTER_CFG 0x1400 -+#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) -+#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) -+#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) -+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) -+#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) -+#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) -+#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) -+#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) -+#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) -+#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) -+#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) -+#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) -+#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) -+#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) -+#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) -+#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) -+#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) -+ -+/* -+ * AUTO_RSP_CFG: -+ * AUTORESPONDER: 0: disable, 1: enable -+ * BAC_ACK_POLICY: 0:long, 1:short preamble -+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode -+ * CTS_40_MREF: Response CTS 40MHz duplicate mode -+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble -+ * DUAL_CTS_EN: Power bit value in control frame -+ * ACK_CTS_PSM_BIT:Power bit value in control frame -+ */ -+#define AUTO_RSP_CFG 0x1404 -+#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) -+#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) -+#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) -+#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) -+#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) -+#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) -+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) -+ -+/* -+ * LEGACY_BASIC_RATE: -+ */ -+#define LEGACY_BASIC_RATE 0x1408 -+ -+/* -+ * HT_BASIC_RATE: -+ */ -+#define HT_BASIC_RATE 0x140c -+ -+/* -+ * HT_CTRL_CFG: -+ */ -+#define HT_CTRL_CFG 0x1410 -+ -+/* -+ * SIFS_COST_CFG: -+ */ -+#define SIFS_COST_CFG 0x1414 -+ -+/* -+ * RX_PARSER_CFG: -+ * Set NAV for all received frames -+ */ -+#define RX_PARSER_CFG 0x1418 -+ -+/* -+ * TX_SEC_CNT0: -+ */ -+#define TX_SEC_CNT0 0x1500 -+ -+/* -+ * RX_SEC_CNT0: -+ */ -+#define RX_SEC_CNT0 0x1504 -+ -+/* -+ * CCMP_FC_MUTE: -+ */ -+#define CCMP_FC_MUTE 0x1508 -+ -+/* -+ * TXOP_HLDR_ADDR0: -+ */ -+#define TXOP_HLDR_ADDR0 0x1600 -+ -+/* -+ * TXOP_HLDR_ADDR1: -+ */ -+#define TXOP_HLDR_ADDR1 0x1604 -+ -+/* -+ * TXOP_HLDR_ET: -+ */ -+#define TXOP_HLDR_ET 0x1608 -+ -+/* -+ * QOS_CFPOLL_RA_DW0: -+ */ -+#define QOS_CFPOLL_RA_DW0 0x160c -+ -+/* -+ * QOS_CFPOLL_RA_DW1: -+ */ -+#define QOS_CFPOLL_RA_DW1 0x1610 -+ -+/* -+ * QOS_CFPOLL_QC: -+ */ -+#define QOS_CFPOLL_QC 0x1614 -+ -+/* -+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count -+ */ -+#define RX_STA_CNT0 0x1700 -+#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) -+#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) -+ -+/* -+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count -+ */ -+#define RX_STA_CNT1 0x1704 -+#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) -+#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) -+ -+/* -+ * RX_STA_CNT2: -+ */ -+#define RX_STA_CNT2 0x1708 -+#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) -+#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) -+ -+/* -+ * TX_STA_CNT0: TX Beacon count -+ */ -+#define TX_STA_CNT0 0x170c -+#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) -+#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_STA_CNT1: TX tx count -+ */ -+#define TX_STA_CNT1 0x1710 -+#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) -+#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) -+ -+/* -+ * TX_STA_CNT2: TX tx count -+ */ -+#define TX_STA_CNT2 0x1714 -+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) -+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_STA_FIFO: TX Result for specific PID status fifo register -+ */ -+#define TX_STA_FIFO 0x1718 -+#define TX_STA_FIFO_VALID FIELD32(0x00000001) -+#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) -+#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) -+#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) -+#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) -+#define TX_STA_FIFO_WCID FIELD32(0x0000ff00) -+#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT: Debug counter -+ */ -+#define TX_AGG_CNT 0x171c -+#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT0: -+ */ -+#define TX_AGG_CNT0 0x1720 -+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT1: -+ */ -+#define TX_AGG_CNT1 0x1724 -+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT2: -+ */ -+#define TX_AGG_CNT2 0x1728 -+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT3: -+ */ -+#define TX_AGG_CNT3 0x172c -+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT4: -+ */ -+#define TX_AGG_CNT4 0x1730 -+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT5: -+ */ -+#define TX_AGG_CNT5 0x1734 -+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT6: -+ */ -+#define TX_AGG_CNT6 0x1738 -+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) -+ -+/* -+ * TX_AGG_CNT7: -+ */ -+#define TX_AGG_CNT7 0x173c -+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) -+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) -+ -+/* -+ * MPDU_DENSITY_CNT: -+ * TX_ZERO_DEL: TX zero length delimiter count -+ * RX_ZERO_DEL: RX zero length delimiter count -+ */ -+#define MPDU_DENSITY_CNT 0x1740 -+#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) -+#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) -+ -+/* -+ * Security key table memory. -+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry -+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry -+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry -+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry -+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry -+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry -+ */ -+#define MAC_WCID_BASE 0x1800 -+#define PAIRWISE_KEY_TABLE_BASE 0x4000 -+#define MAC_IVEIV_TABLE_BASE 0x6000 -+#define MAC_WCID_ATTRIBUTE_BASE 0x6800 -+#define SHARED_KEY_TABLE_BASE 0x6c00 -+#define SHARED_KEY_MODE_BASE 0x7000 -+ -+#define MAC_WCID_ENTRY(__idx) \ -+ ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) -+#define PAIRWISE_KEY_ENTRY(__idx) \ -+ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) -+#define MAC_IVEIV_ENTRY(__idx) \ -+ ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) -+#define MAC_WCID_ATTR_ENTRY(__idx) \ -+ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) -+#define SHARED_KEY_ENTRY(__idx) \ -+ ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) -+#define SHARED_KEY_MODE_ENTRY(__idx) \ -+ ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) -+ -+struct mac_wcid_entry { -+ u8 mac[6]; -+ u8 reserved[2]; -+} __attribute__ ((packed)); -+ -+struct hw_key_entry { -+ u8 key[16]; -+ u8 tx_mic[8]; -+ u8 rx_mic[8]; -+} __attribute__ ((packed)); -+ -+struct mac_iveiv_entry { -+ u8 iv[8]; -+} __attribute__ ((packed)); -+ -+/* -+ * MAC_WCID_ATTRIBUTE: -+ */ -+#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) -+#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) -+#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) -+#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) -+ -+/* -+ * SHARED_KEY_MODE: -+ */ -+#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) -+#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) -+#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) -+#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) -+#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) -+#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) -+#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) -+#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) -+ -+/* -+ * HOST-MCU communication -+ */ -+ -+/* -+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. -+ */ -+#define H2M_MAILBOX_CSR 0x7010 -+#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) -+#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) -+#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) -+#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) -+ -+/* -+ * H2M_MAILBOX_CID: -+ */ -+#define H2M_MAILBOX_CID 0x7014 -+#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) -+#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) -+#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) -+#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) -+ -+/* -+ * H2M_MAILBOX_STATUS: -+ */ -+#define H2M_MAILBOX_STATUS 0x701c -+ -+/* -+ * H2M_INT_SRC: -+ */ -+#define H2M_INT_SRC 0x7024 -+ -+/* -+ * H2M_BBP_AGENT: -+ */ -+#define H2M_BBP_AGENT 0x7028 -+ -+/* -+ * MCU_LEDCS: LED control for MCU Mailbox. -+ */ -+#define MCU_LEDCS_LED_MODE FIELD8(0x1f) -+#define MCU_LEDCS_POLARITY FIELD8(0x01) -+ -+/* -+ * HW_CS_CTS_BASE: -+ * Carrier-sense CTS frame base address. -+ * It's where mac stores carrier-sense frame for carrier-sense function. -+ */ -+#define HW_CS_CTS_BASE 0x7700 -+ -+/* -+ * HW_DFS_CTS_BASE: -+ * FS CTS frame base address. It's where mac stores CTS frame for DFS. -+ */ -+#define HW_DFS_CTS_BASE 0x7780 -+ -+/* -+ * TXRX control registers - base address 0x3000 -+ */ -+ -+/* -+ * TXRX_CSR1: -+ * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. -+ */ -+#define TXRX_CSR1 0x77d0 -+ -+/* -+ * HW_DEBUG_SETTING_BASE: -+ * since NULL frame won't be that long (256 byte) -+ * We steal 16 tail bytes to save debugging settings -+ */ -+#define HW_DEBUG_SETTING_BASE 0x77f0 -+#define HW_DEBUG_SETTING_BASE2 0x7770 -+ -+/* -+ * HW_BEACON_BASE -+ * In order to support maximum 8 MBSS and its maximum length -+ * is 512 bytes for each beacon -+ * Three section discontinue memory segments will be used. -+ * 1. The original region for BCN 0~3 -+ * 2. Extract memory from FCE table for BCN 4~5 -+ * 3. Extract memory from Pair-wise key table for BCN 6~7 -+ * It occupied those memory of wcid 238~253 for BCN 6 -+ * and wcid 222~237 for BCN 7 -+ * -+ * IMPORTANT NOTE: Not sure why legacy driver does this, -+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. -+ */ -+#define HW_BEACON_BASE0 0x7800 -+#define HW_BEACON_BASE1 0x7a00 -+#define HW_BEACON_BASE2 0x7c00 -+#define HW_BEACON_BASE3 0x7e00 -+#define HW_BEACON_BASE4 0x7200 -+#define HW_BEACON_BASE5 0x7400 -+#define HW_BEACON_BASE6 0x5dc0 -+#define HW_BEACON_BASE7 0x5bc0 -+ -+#define HW_BEACON_OFFSET(__index) \ -+ ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \ -+ (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \ -+ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) ) -+ -+/* -+ * 8051 firmware image. -+ */ -+#define FIRMWARE_RT2860 "rt2860.bin" -+#define FIRMWARE_IMAGE_BASE 0x2000 -+ -+/* -+ * BBP registers. -+ * The wordsize of the BBP is 8 bits. -+ */ -+ -+/* -+ * BBP 1: TX Antenna -+ */ -+#define BBP1_TX_POWER FIELD8(0x07) -+#define BBP1_TX_ANTENNA FIELD8(0x18) -+ -+/* -+ * BBP 3: RX Antenna -+ */ -+#define BBP3_RX_ANTENNA FIELD8(0x18) -+#define BBP3_HT40_PLUS FIELD8(0x20) -+ -+/* -+ * BBP 4: Bandwidth -+ */ -+#define BBP4_TX_BF FIELD8(0x01) -+#define BBP4_BANDWIDTH FIELD8(0x18) -+ -+/* -+ * RFCSR registers -+ * The wordsize of the RFCSR is 8 bits. -+ */ -+ -+/* -+ * RFCSR 6: -+ */ -+#define RFCSR6_R FIELD8(0x03) -+ -+/* -+ * RFCSR 7: -+ */ -+#define RFCSR7_RF_TUNING FIELD8(0x01) -+ -+/* -+ * RFCSR 12: -+ */ -+#define RFCSR12_TX_POWER FIELD8(0x1f) -+ -+/* -+ * RFCSR 22: -+ */ -+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) -+ -+/* -+ * RFCSR 23: -+ */ -+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) -+ -+/* -+ * RFCSR 30: -+ */ -+#define RFCSR30_RF_CALIBRATION FIELD8(0x80) -+ -+/* -+ * RF registers -+ */ -+ -+/* -+ * RF 2 -+ */ -+#define RF2_ANTENNA_RX2 FIELD32(0x00000040) -+#define RF2_ANTENNA_TX1 FIELD32(0x00004000) -+#define RF2_ANTENNA_RX1 FIELD32(0x00020000) -+ -+/* -+ * RF 3 -+ */ -+#define RF3_TXPOWER_G FIELD32(0x00003e00) -+#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) -+#define RF3_TXPOWER_A FIELD32(0x00003c00) -+ -+/* -+ * RF 4 -+ */ -+#define RF4_TXPOWER_G FIELD32(0x000007c0) -+#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) -+#define RF4_TXPOWER_A FIELD32(0x00000780) -+#define RF4_FREQ_OFFSET FIELD32(0x001f8000) -+#define RF4_HT40 FIELD32(0x00200000) -+ -+/* -+ * EEPROM content. -+ * The wordsize of the EEPROM is 16 bits. -+ */ -+ -+/* -+ * EEPROM Version -+ */ -+#define EEPROM_VERSION 0x0001 -+#define EEPROM_VERSION_FAE FIELD16(0x00ff) -+#define EEPROM_VERSION_VERSION FIELD16(0xff00) -+ -+/* -+ * HW MAC address. -+ */ -+#define EEPROM_MAC_ADDR_0 0x0002 -+#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -+#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -+#define EEPROM_MAC_ADDR_1 0x0003 -+#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -+#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -+#define EEPROM_MAC_ADDR_2 0x0004 -+#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -+#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) -+ -+/* -+ * EEPROM ANTENNA config -+ * RXPATH: 1: 1R, 2: 2R, 3: 3R -+ * TXPATH: 1: 1T, 2: 2T -+ */ -+#define EEPROM_ANTENNA 0x001a -+#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f) -+#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0) -+#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00) -+ -+/* -+ * EEPROM NIC config -+ * CARDBUS_ACCEL: 0 - enable, 1 - disable -+ */ -+#define EEPROM_NIC 0x001b -+#define EEPROM_NIC_HW_RADIO FIELD16(0x0001) -+#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002) -+#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004) -+#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008) -+#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010) -+#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020) -+#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040) -+#define EEPROM_NIC_WPS_PBC FIELD16(0x0080) -+#define EEPROM_NIC_BW40M_BG FIELD16(0x0100) -+#define EEPROM_NIC_BW40M_A FIELD16(0x0200) -+ -+/* -+ * EEPROM frequency -+ */ -+#define EEPROM_FREQ 0x001d -+#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -+#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) -+#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) -+ -+/* -+ * EEPROM LED -+ * POLARITY_RDY_G: Polarity RDY_G setting. -+ * POLARITY_RDY_A: Polarity RDY_A setting. -+ * POLARITY_ACT: Polarity ACT setting. -+ * POLARITY_GPIO_0: Polarity GPIO0 setting. -+ * POLARITY_GPIO_1: Polarity GPIO1 setting. -+ * POLARITY_GPIO_2: Polarity GPIO2 setting. -+ * POLARITY_GPIO_3: Polarity GPIO3 setting. -+ * POLARITY_GPIO_4: Polarity GPIO4 setting. -+ * LED_MODE: Led mode. -+ */ -+#define EEPROM_LED1 0x001e -+#define EEPROM_LED2 0x001f -+#define EEPROM_LED3 0x0020 -+#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) -+#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -+#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -+#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -+#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -+#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -+#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -+#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -+#define EEPROM_LED_LED_MODE FIELD16(0x1f00) -+ -+/* -+ * EEPROM LNA -+ */ -+#define EEPROM_LNA 0x0022 -+#define EEPROM_LNA_BG FIELD16(0x00ff) -+#define EEPROM_LNA_A0 FIELD16(0xff00) -+ -+/* -+ * EEPROM RSSI BG offset -+ */ -+#define EEPROM_RSSI_BG 0x0023 -+#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) -+#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) -+ -+/* -+ * EEPROM RSSI BG2 offset -+ */ -+#define EEPROM_RSSI_BG2 0x0024 -+#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) -+#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) -+ -+/* -+ * EEPROM RSSI A offset -+ */ -+#define EEPROM_RSSI_A 0x0025 -+#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) -+#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) -+ -+/* -+ * EEPROM RSSI A2 offset -+ */ -+#define EEPROM_RSSI_A2 0x0026 -+#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) -+#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) -+ -+/* -+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. -+ * This is delta in 40MHZ. -+ * VALUE: Tx Power dalta value (MAX=4) -+ * TYPE: 1: Plus the delta value, 0: minus the delta value -+ * TXPOWER: Enable: -+ */ -+#define EEPROM_TXPOWER_DELTA 0x0028 -+#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f) -+#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040) -+#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080) -+ -+/* -+ * EEPROM TXPOWER 802.11BG -+ */ -+#define EEPROM_TXPOWER_BG1 0x0029 -+#define EEPROM_TXPOWER_BG2 0x0030 -+#define EEPROM_TXPOWER_BG_SIZE 7 -+#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) -+#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) -+ -+/* -+ * EEPROM TXPOWER 802.11A -+ */ -+#define EEPROM_TXPOWER_A1 0x003c -+#define EEPROM_TXPOWER_A2 0x0053 -+#define EEPROM_TXPOWER_A_SIZE 6 -+#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -+#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) -+ -+/* -+ * EEPROM TXpower byrate: 20MHZ power -+ */ -+#define EEPROM_TXPOWER_BYRATE 0x006f -+ -+/* -+ * EEPROM BBP. -+ */ -+#define EEPROM_BBP_START 0x0078 -+#define EEPROM_BBP_SIZE 16 -+#define EEPROM_BBP_VALUE FIELD16(0x00ff) -+#define EEPROM_BBP_REG_ID FIELD16(0xff00) -+ -+/* -+ * MCU mailbox commands. -+ */ -+#define MCU_SLEEP 0x30 -+#define MCU_WAKEUP 0x31 -+#define MCU_RADIO_OFF 0x35 -+#define MCU_CURRENT 0x36 -+#define MCU_LED 0x50 -+#define MCU_LED_STRENGTH 0x51 -+#define MCU_LED_1 0x52 -+#define MCU_LED_2 0x53 -+#define MCU_LED_3 0x54 -+#define MCU_RADAR 0x60 -+#define MCU_BOOT_SIGNAL 0x72 -+#define MCU_BBP_SIGNAL 0x80 -+#define MCU_POWER_SAVE 0x83 -+ -+/* -+ * MCU mailbox tokens -+ */ -+#define TOKEN_WAKUP 3 -+ -+/* -+ * DMA descriptor defines. -+ */ -+#define TXD_DESC_SIZE ( 4 * sizeof(__le32) ) -+#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) ) -+#define RXD_DESC_SIZE ( 4 * sizeof(__le32) ) -+#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) ) -+ -+/* -+ * TX descriptor format for TX, PRIO and Beacon Ring. -+ */ -+ -+/* -+ * Word0 -+ */ -+#define TXD_W0_SD_PTR0 FIELD32(0xffffffff) -+ -+/* -+ * Word1 -+ */ -+#define TXD_W1_SD_LEN1 FIELD32(0x00003fff) -+#define TXD_W1_LAST_SEC1 FIELD32(0x00004000) -+#define TXD_W1_BURST FIELD32(0x00008000) -+#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000) -+#define TXD_W1_LAST_SEC0 FIELD32(0x40000000) -+#define TXD_W1_DMA_DONE FIELD32(0x80000000) -+ -+/* -+ * Word2 -+ */ -+#define TXD_W2_SD_PTR1 FIELD32(0xffffffff) -+ -+/* -+ * Word3 -+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI -+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. -+ * 0:MGMT, 1:HCCA 2:EDCA -+ */ -+#define TXD_W3_WIV FIELD32(0x01000000) -+#define TXD_W3_QSEL FIELD32(0x06000000) -+#define TXD_W3_TCO FIELD32(0x20000000) -+#define TXD_W3_UCO FIELD32(0x40000000) -+#define TXD_W3_ICO FIELD32(0x80000000) -+ -+/* -+ * TX WI structure -+ */ -+ -+/* -+ * Word0 -+ * FRAG: 1 To inform TKIP engine this is a fragment. -+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode -+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs -+ * BW: Channel bandwidth 20MHz or 40 MHz -+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED -+ */ -+#define TXWI_W0_FRAG FIELD32(0x00000001) -+#define TXWI_W0_MIMO_PS FIELD32(0x00000002) -+#define TXWI_W0_CF_ACK FIELD32(0x00000004) -+#define TXWI_W0_TS FIELD32(0x00000008) -+#define TXWI_W0_AMPDU FIELD32(0x00000010) -+#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) -+#define TXWI_W0_TX_OP FIELD32(0x00000300) -+#define TXWI_W0_MCS FIELD32(0x007f0000) -+#define TXWI_W0_BW FIELD32(0x00800000) -+#define TXWI_W0_SHORT_GI FIELD32(0x01000000) -+#define TXWI_W0_STBC FIELD32(0x06000000) -+#define TXWI_W0_IFS FIELD32(0x08000000) -+#define TXWI_W0_PHYMODE FIELD32(0xc0000000) -+ -+/* -+ * Word1 -+ */ -+#define TXWI_W1_ACK FIELD32(0x00000001) -+#define TXWI_W1_NSEQ FIELD32(0x00000002) -+#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) -+#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) -+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -+#define TXWI_W1_PACKETID FIELD32(0xf0000000) -+ -+/* -+ * Word2 -+ */ -+#define TXWI_W2_IV FIELD32(0xffffffff) -+ -+/* -+ * Word3 -+ */ -+#define TXWI_W3_EIV FIELD32(0xffffffff) -+ -+/* -+ * RX descriptor format for RX Ring. -+ */ -+ -+/* -+ * Word0 -+ */ -+#define RXD_W0_SDP0 FIELD32(0xffffffff) -+ -+/* -+ * Word1 -+ */ -+#define RXD_W1_SDL1 FIELD32(0x00003fff) -+#define RXD_W1_SDL0 FIELD32(0x3fff0000) -+#define RXD_W1_LS0 FIELD32(0x40000000) -+#define RXD_W1_DMA_DONE FIELD32(0x80000000) -+ -+/* -+ * Word2 -+ */ -+#define RXD_W2_SDP1 FIELD32(0xffffffff) -+ -+/* -+ * Word3 -+ * AMSDU: RX with 802.3 header, not 802.11 header. -+ * DECRYPTED: This frame is being decrypted. -+ */ -+#define RXD_W3_BA FIELD32(0x00000001) -+#define RXD_W3_DATA FIELD32(0x00000002) -+#define RXD_W3_NULLDATA FIELD32(0x00000004) -+#define RXD_W3_FRAG FIELD32(0x00000008) -+#define RXD_W3_UNICAST_TO_ME FIELD32(0x00000010) -+#define RXD_W3_MULTICAST FIELD32(0x00000020) -+#define RXD_W3_BROADCAST FIELD32(0x00000040) -+#define RXD_W3_MY_BSS FIELD32(0x00000080) -+#define RXD_W3_CRC_ERROR FIELD32(0x00000100) -+#define RXD_W3_CIPHER_ERROR FIELD32(0x00000600) -+#define RXD_W3_AMSDU FIELD32(0x00000800) -+#define RXD_W3_HTC FIELD32(0x00001000) -+#define RXD_W3_RSSI FIELD32(0x00002000) -+#define RXD_W3_L2PAD FIELD32(0x00004000) -+#define RXD_W3_AMPDU FIELD32(0x00008000) -+#define RXD_W3_DECRYPTED FIELD32(0x00010000) -+#define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000) -+#define RXD_W3_PLCP_RSSI FIELD32(0x00040000) -+ -+/* -+ * RX WI structure -+ */ -+ -+/* -+ * Word0 -+ */ -+#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) -+#define RXWI_W0_KEY_INDEX FIELD32(0x00000300) -+#define RXWI_W0_BSSID FIELD32(0x00001c00) -+#define RXWI_W0_UDF FIELD32(0x0000e000) -+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -+#define RXWI_W0_TID FIELD32(0xf0000000) -+ -+/* -+ * Word1 -+ */ -+#define RXWI_W1_FRAG FIELD32(0x0000000f) -+#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) -+#define RXWI_W1_MCS FIELD32(0x007f0000) -+#define RXWI_W1_BW FIELD32(0x00800000) -+#define RXWI_W1_SHORT_GI FIELD32(0x01000000) -+#define RXWI_W1_STBC FIELD32(0x06000000) -+#define RXWI_W1_PHYMODE FIELD32(0xc0000000) -+ -+/* -+ * Word2 -+ */ -+#define RXWI_W2_RSSI0 FIELD32(0x000000ff) -+#define RXWI_W2_RSSI1 FIELD32(0x0000ff00) -+#define RXWI_W2_RSSI2 FIELD32(0x00ff0000) -+ -+/* -+ * Word3 -+ */ -+#define RXWI_W3_SNR0 FIELD32(0x000000ff) -+#define RXWI_W3_SNR1 FIELD32(0x0000ff00) -+ -+/* -+ * Macros for converting txpower from EEPROM to mac80211 value -+ * and from mac80211 value to register value. -+ */ -+#define MIN_G_TXPOWER 0 -+#define MIN_A_TXPOWER -7 -+#define MAX_G_TXPOWER 31 -+#define MAX_A_TXPOWER 15 -+#define DEFAULT_TXPOWER 5 -+ -+#define TXPOWER_G_FROM_DEV(__txpower) \ -+ ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) -+ -+#define TXPOWER_G_TO_DEV(__txpower) \ -+ clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER) -+ -+#define TXPOWER_A_FROM_DEV(__txpower) \ -+ ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) -+ -+#define TXPOWER_A_TO_DEV(__txpower) \ -+ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) -+ -+#endif /* RT2800PCI_H */ ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -158,6 +158,12 @@ struct rt2x00_chip { - #define RT2561 0x0302 - #define RT2661 0x0401 - #define RT2571 0x1300 -+#define RT2860 0x0601 /* 2.4GHz PCI/CB */ -+#define RT2860D 0x0681 /* 2.4GHz, 5GHz PCI/CB */ -+#define RT2890 0x0701 /* 2.4GHz PCIe */ -+#define RT2890D 0x0781 /* 2.4GHz, 5GHz PCIe */ -+#define RT2880 0x2880 /* WSOC */ -+#define RT3052 0x3052 /* WSOC */ - #define RT2870 0x1600 - - u16 rf; diff --git a/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch b/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch index 9d9d3a48b5..1780fc7b31 100644 --- a/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch +++ b/package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch @@ -8,7 +8,7 @@ #include <asm/unaligned.h> #include "hw.h" -@@ -511,8 +512,18 @@ static int ath9k_hw_init_macaddr(struct +@@ -494,8 +495,18 @@ static int ath9k_hw_init_macaddr(struct common->macaddr[2 * i] = eeval >> 8; common->macaddr[2 * i + 1] = eeval & 0xff; } diff --git a/package/mac80211/patches/404-ath_regd_optional.patch b/package/mac80211/patches/404-ath_regd_optional.patch index 6b2613a440..58ed4bdbeb 100644 --- a/package/mac80211/patches/404-ath_regd_optional.patch +++ b/package/mac80211/patches/404-ath_regd_optional.patch @@ -18,7 +18,7 @@ +#endif --- a/drivers/net/wireless/ath/regd.h +++ b/drivers/net/wireless/ath/regd.h -@@ -242,6 +242,41 @@ enum CountryCode { +@@ -250,6 +250,41 @@ enum CountryCode { CTRY_BELGIUM2 = 5002 }; @@ -60,7 +60,7 @@ bool ath_is_world_regd(struct ath_regulatory *reg); int ath_regd_init(struct ath_regulatory *reg, struct wiphy *wiphy, int (*reg_notifier)(struct wiphy *wiphy, -@@ -253,3 +288,5 @@ int ath_reg_notifier_apply(struct wiphy +@@ -261,3 +296,5 @@ int ath_reg_notifier_apply(struct wiphy struct ath_regulatory *reg); #endif diff --git a/package/mac80211/patches/405-compile_fix.patch b/package/mac80211/patches/405-compile_fix.patch deleted file mode 100644 index 10855d41ce..0000000000 --- a/package/mac80211/patches/405-compile_fix.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/wireless/ath/ath9k/ahb.c -+++ b/drivers/net/wireless/ath/ath9k/ahb.c -@@ -29,15 +29,13 @@ static void ath_ahb_read_cachesize(struc - - static void ath_ahb_cleanup(struct ath_common *common) - { -- struct ath_hw *ah = (struct ath_hw *) common->ah; -- struct ath_softc *sc = ah->ah_sc; -+ struct ath_softc *sc = (struct ath_softc *) common->priv; - iounmap(sc->mem); - } - - static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) - { -- struct ath_hw *ah = (struct ath_hw *) common->ah; -- struct ath_softc *sc = ah->ah_sc; -+ struct ath_softc *sc = (struct ath_softc *) common->priv; - struct platform_device *pdev = to_platform_device(sc->dev); - struct ath9k_platform_data *pdata; - diff --git a/package/mac80211/patches/406-ibss_fix.patch b/package/mac80211/patches/406-ibss_fix.patch deleted file mode 100644 index 847451fc2a..0000000000 --- a/package/mac80211/patches/406-ibss_fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/mac80211/ibss.c -+++ b/net/mac80211/ibss.c -@@ -544,7 +544,7 @@ static void ieee80211_sta_find_ibss(stru - "%pM\n", bss->cbss.bssid, ifibss->bssid); - #endif /* CONFIG_MAC80211_IBSS_DEBUG */ - -- if (bss && memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) { -+ if (bss && !memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) { - printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM" - " based on configured SSID\n", - sdata->dev->name, bss->cbss.bssid); diff --git a/package/mac80211/patches/407-ath5k_compat_fix.patch b/package/mac80211/patches/407-ath5k_compat_fix.patch deleted file mode 100644 index a214343fb1..0000000000 --- a/package/mac80211/patches/407-ath5k_compat_fix.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/net/wireless/ath/ath5k/base.c -+++ b/drivers/net/wireless/ath/ath5k/base.c -@@ -238,7 +238,7 @@ static struct pci_driver ath5k_pci_drive - .remove = __devexit_p(ath5k_pci_remove), - #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) - .driver.pm = ATH5K_PM_OPS, --#else -+#elif defined(CONFIG_PM) - .suspend = ath5k_pci_suspend_compat, - .resume = ath5k_pci_resume_compat, - #endif ---- a/compat/patches/11-dev-pm-ops.patch -+++ b/compat/patches/11-dev-pm-ops.patch -@@ -49,7 +49,7 @@ calls on compat code with only slight mo - .remove = __devexit_p(ath5k_pci_remove), - +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) - .driver.pm = ATH5K_PM_OPS, --+#else -++#elif defined(CONFIG_PM) - + .suspend = ath5k_pci_suspend_compat, - + .resume = ath5k_pci_resume_compat, - +#endif |