diff options
Diffstat (limited to 'package/mac80211/src/include')
| -rw-r--r-- | package/mac80211/src/include/linux/ieee80211.h | 414 | ||||
| -rw-r--r-- | package/mac80211/src/include/linux/nl80211.h | 129 | ||||
| -rw-r--r-- | package/mac80211/src/include/net/cfg80211.h | 83 | ||||
| -rw-r--r-- | package/mac80211/src/include/net/ieee80211_radiotap.h | 268 | ||||
| -rw-r--r-- | package/mac80211/src/include/net/mac80211.h | 1429 |
5 files changed, 2323 insertions, 0 deletions
diff --git a/package/mac80211/src/include/linux/ieee80211.h b/package/mac80211/src/include/linux/ieee80211.h new file mode 100644 index 0000000000..30621c2715 --- /dev/null +++ b/package/mac80211/src/include/linux/ieee80211.h @@ -0,0 +1,414 @@ +/* + * IEEE 802.11 defines + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <jkmaline@cc.hut.fi> + * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> + * Copyright (c) 2005, Devicescape Software, Inc. + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef IEEE80211_H +#define IEEE80211_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +#define FCS_LEN 4 + +#define IEEE80211_FCTL_VERS 0x0003 +#define IEEE80211_FCTL_FTYPE 0x000c +#define IEEE80211_FCTL_STYPE 0x00f0 +#define IEEE80211_FCTL_TODS 0x0100 +#define IEEE80211_FCTL_FROMDS 0x0200 +#define IEEE80211_FCTL_MOREFRAGS 0x0400 +#define IEEE80211_FCTL_RETRY 0x0800 +#define IEEE80211_FCTL_PM 0x1000 +#define IEEE80211_FCTL_MOREDATA 0x2000 +#define IEEE80211_FCTL_PROTECTED 0x4000 +#define IEEE80211_FCTL_ORDER 0x8000 + +#define IEEE80211_SCTL_FRAG 0x000F +#define IEEE80211_SCTL_SEQ 0xFFF0 + +#define IEEE80211_FTYPE_MGMT 0x0000 +#define IEEE80211_FTYPE_CTL 0x0004 +#define IEEE80211_FTYPE_DATA 0x0008 + +/* management */ +#define IEEE80211_STYPE_ASSOC_REQ 0x0000 +#define IEEE80211_STYPE_ASSOC_RESP 0x0010 +#define IEEE80211_STYPE_REASSOC_REQ 0x0020 +#define IEEE80211_STYPE_REASSOC_RESP 0x0030 +#define IEEE80211_STYPE_PROBE_REQ 0x0040 +#define IEEE80211_STYPE_PROBE_RESP 0x0050 +#define IEEE80211_STYPE_BEACON 0x0080 +#define IEEE80211_STYPE_ATIM 0x0090 +#define IEEE80211_STYPE_DISASSOC 0x00A0 +#define IEEE80211_STYPE_AUTH 0x00B0 +#define IEEE80211_STYPE_DEAUTH 0x00C0 +#define IEEE80211_STYPE_ACTION 0x00D0 + +/* control */ +#define IEEE80211_STYPE_PSPOLL 0x00A0 +#define IEEE80211_STYPE_RTS 0x00B0 +#define IEEE80211_STYPE_CTS 0x00C0 +#define IEEE80211_STYPE_ACK 0x00D0 +#define IEEE80211_STYPE_CFEND 0x00E0 +#define IEEE80211_STYPE_CFENDACK 0x00F0 + +/* data */ +#define IEEE80211_STYPE_DATA 0x0000 +#define IEEE80211_STYPE_DATA_CFACK 0x0010 +#define IEEE80211_STYPE_DATA_CFPOLL 0x0020 +#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 +#define IEEE80211_STYPE_NULLFUNC 0x0040 +#define IEEE80211_STYPE_CFACK 0x0050 +#define IEEE80211_STYPE_CFPOLL 0x0060 +#define IEEE80211_STYPE_CFACKPOLL 0x0070 +#define IEEE80211_STYPE_QOS_DATA 0x0080 +#define IEEE80211_STYPE_QOS_DATA_CFACK 0x0090 +#define IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0 +#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0 +#define IEEE80211_STYPE_QOS_NULLFUNC 0x00C0 +#define IEEE80211_STYPE_QOS_CFACK 0x00D0 +#define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 +#define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 + + +/* miscellaneous IEEE 802.11 constants */ +#define IEEE80211_MAX_FRAG_THRESHOLD 2346 +#define IEEE80211_MAX_RTS_THRESHOLD 2347 +#define IEEE80211_MAX_AID 2007 +#define IEEE80211_MAX_TIM_LEN 251 +#define IEEE80211_MAX_DATA_LEN 2304 +/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section + 6.2.1.1.2. + + The figure in section 7.1.2 suggests a body size of up to 2312 + bytes is allowed, which is a bit confusing, I suspect this + represents the 2304 bytes of real data, plus a possible 8 bytes of + WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ + +#define IEEE80211_MAX_SSID_LEN 32 + +struct ieee80211_hdr { + __le16 frame_control; + __le16 duration_id; + u8 addr1[6]; + u8 addr2[6]; + u8 addr3[6]; + __le16 seq_ctrl; + u8 addr4[6]; +} __attribute__ ((packed)); + + +struct ieee80211_mgmt { + __le16 frame_control; + __le16 duration; + u8 da[6]; + u8 sa[6]; + u8 bssid[6]; + __le16 seq_ctrl; + union { + struct { + __le16 auth_alg; + __le16 auth_transaction; + __le16 status_code; + /* possibly followed by Challenge text */ + u8 variable[0]; + } __attribute__ ((packed)) auth; + struct { + __le16 reason_code; + } __attribute__ ((packed)) deauth; + struct { + __le16 capab_info; + __le16 listen_interval; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) assoc_req; + struct { + __le16 capab_info; + __le16 status_code; + __le16 aid; + /* followed by Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) assoc_resp, reassoc_resp; + struct { + __le16 capab_info; + __le16 listen_interval; + u8 current_ap[6]; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) reassoc_req; + struct { + __le16 reason_code; + } __attribute__ ((packed)) disassoc; + struct { + __le64 timestamp; + __le16 beacon_int; + __le16 capab_info; + /* followed by some of SSID, Supported rates, + * FH Params, DS Params, CF Params, IBSS Params, TIM */ + u8 variable[0]; + } __attribute__ ((packed)) beacon; + struct { + /* only variable items: SSID, Supported rates */ + u8 variable[0]; + } __attribute__ ((packed)) probe_req; + struct { + __le64 timestamp; + __le16 beacon_int; + __le16 capab_info; + /* followed by some of SSID, Supported rates, + * FH Params, DS Params, CF Params, IBSS Params */ + u8 variable[0]; + } __attribute__ ((packed)) probe_resp; + struct { + u8 category; + union { + struct { + u8 action_code; + u8 dialog_token; + u8 status_code; + u8 variable[0]; + } __attribute__ ((packed)) wme_action; + struct{ + u8 action_code; + u8 element_id; + u8 length; + u8 switch_mode; + u8 new_chan; + u8 switch_count; + } __attribute__((packed)) chan_switch; + } u; + } __attribute__ ((packed)) action; + } u; +} __attribute__ ((packed)); + + +/* Control frames */ +struct ieee80211_rts { + __le16 frame_control; + __le16 duration; + u8 ra[6]; + u8 ta[6]; +} __attribute__ ((packed)); + +struct ieee80211_cts { + __le16 frame_control; + __le16 duration; + u8 ra[6]; +} __attribute__ ((packed)); + + +/* Authentication algorithms */ +#define WLAN_AUTH_OPEN 0 +#define WLAN_AUTH_SHARED_KEY 1 +#define WLAN_AUTH_FAST_BSS_TRANSITION 2 +#define WLAN_AUTH_LEAP 128 + +#define WLAN_AUTH_CHALLENGE_LEN 128 + +#define WLAN_CAPABILITY_ESS (1<<0) +#define WLAN_CAPABILITY_IBSS (1<<1) +#define WLAN_CAPABILITY_CF_POLLABLE (1<<2) +#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) +#define WLAN_CAPABILITY_PRIVACY (1<<4) +#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) +#define WLAN_CAPABILITY_PBCC (1<<6) +#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) +/* 802.11h */ +#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) +#define WLAN_CAPABILITY_QOS (1<<9) +#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) +#define WLAN_CAPABILITY_DSSS_OFDM (1<<13) + +/* 802.11g ERP information element */ +#define WLAN_ERP_NON_ERP_PRESENT (1<<0) +#define WLAN_ERP_USE_PROTECTION (1<<1) +#define WLAN_ERP_BARKER_PREAMBLE (1<<2) + +/* WLAN_ERP_BARKER_PREAMBLE values */ +enum { + WLAN_ERP_PREAMBLE_SHORT = 0, + WLAN_ERP_PREAMBLE_LONG = 1, +}; + +/* Status codes */ +enum ieee80211_statuscode { + WLAN_STATUS_SUCCESS = 0, + WLAN_STATUS_UNSPECIFIED_FAILURE = 1, + WLAN_STATUS_CAPS_UNSUPPORTED = 10, + WLAN_STATUS_REASSOC_NO_ASSOC = 11, + WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12, + WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13, + WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14, + WLAN_STATUS_CHALLENGE_FAIL = 15, + WLAN_STATUS_AUTH_TIMEOUT = 16, + WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17, + WLAN_STATUS_ASSOC_DENIED_RATES = 18, + /* 802.11b */ + WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19, + WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20, + WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21, + /* 802.11h */ + WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22, + WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23, + WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24, + /* 802.11g */ + WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25, + WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26, + /* 802.11i */ + WLAN_STATUS_INVALID_IE = 40, + WLAN_STATUS_INVALID_GROUP_CIPHER = 41, + WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42, + WLAN_STATUS_INVALID_AKMP = 43, + WLAN_STATUS_UNSUPP_RSN_VERSION = 44, + WLAN_STATUS_INVALID_RSN_IE_CAP = 45, + WLAN_STATUS_CIPHER_SUITE_REJECTED = 46, +}; + + +/* Reason codes */ +enum ieee80211_reasoncode { + WLAN_REASON_UNSPECIFIED = 1, + WLAN_REASON_PREV_AUTH_NOT_VALID = 2, + WLAN_REASON_DEAUTH_LEAVING = 3, + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4, + WLAN_REASON_DISASSOC_AP_BUSY = 5, + WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6, + WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7, + WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8, + WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9, + /* 802.11h */ + WLAN_REASON_DISASSOC_BAD_POWER = 10, + WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11, + /* 802.11i */ + WLAN_REASON_INVALID_IE = 13, + WLAN_REASON_MIC_FAILURE = 14, + WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15, + WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16, + WLAN_REASON_IE_DIFFERENT = 17, + WLAN_REASON_INVALID_GROUP_CIPHER = 18, + WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19, + WLAN_REASON_INVALID_AKMP = 20, + WLAN_REASON_UNSUPP_RSN_VERSION = 21, + WLAN_REASON_INVALID_RSN_IE_CAP = 22, + WLAN_REASON_IEEE8021X_FAILED = 23, + WLAN_REASON_CIPHER_SUITE_REJECTED = 24, +}; + + +/* Information Element IDs */ +enum ieee80211_eid { + WLAN_EID_SSID = 0, + WLAN_EID_SUPP_RATES = 1, + WLAN_EID_FH_PARAMS = 2, + WLAN_EID_DS_PARAMS = 3, + WLAN_EID_CF_PARAMS = 4, + WLAN_EID_TIM = 5, + WLAN_EID_IBSS_PARAMS = 6, + WLAN_EID_CHALLENGE = 16, + /* 802.11d */ + WLAN_EID_COUNTRY = 7, + WLAN_EID_HP_PARAMS = 8, + WLAN_EID_HP_TABLE = 9, + WLAN_EID_REQUEST = 10, + /* 802.11h */ + WLAN_EID_PWR_CONSTRAINT = 32, + WLAN_EID_PWR_CAPABILITY = 33, + WLAN_EID_TPC_REQUEST = 34, + WLAN_EID_TPC_REPORT = 35, + WLAN_EID_SUPPORTED_CHANNELS = 36, + WLAN_EID_CHANNEL_SWITCH = 37, + WLAN_EID_MEASURE_REQUEST = 38, + WLAN_EID_MEASURE_REPORT = 39, + WLAN_EID_QUIET = 40, + WLAN_EID_IBSS_DFS = 41, + /* 802.11g */ + WLAN_EID_ERP_INFO = 42, + WLAN_EID_EXT_SUPP_RATES = 50, + /* 802.11i */ + WLAN_EID_RSN = 48, + WLAN_EID_WPA = 221, + WLAN_EID_GENERIC = 221, + WLAN_EID_VENDOR_SPECIFIC = 221, + WLAN_EID_QOS_PARAMETER = 222 +}; + +/* cipher suite selectors */ +#define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00 +#define WLAN_CIPHER_SUITE_WEP40 0x000FAC01 +#define WLAN_CIPHER_SUITE_TKIP 0x000FAC02 +/* reserved: 0x000FAC03 */ +#define WLAN_CIPHER_SUITE_CCMP 0x000FAC04 +#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 + +#define WLAN_MAX_KEY_LEN 32 + +/** + * ieee80211_get_SA - get pointer to SA + * + * Given an 802.11 frame, this function returns the offset + * to the source address (SA). It does not verify that the + * header is long enough to contain the address, and the + * header must be long enough to contain the frame control + * field. + * + * @hdr: the frame + */ +static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) +{ + u8 *raw = (u8 *) hdr; + u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */ + + switch (tofrom) { + case 2: + return hdr->addr3; + case 3: + return hdr->addr4; + } + return hdr->addr2; +} + +/** + * ieee80211_get_DA - get pointer to DA + * + * Given an 802.11 frame, this function returns the offset + * to the destination address (DA). It does not verify that + * the header is long enough to contain the address, and the + * header must be long enough to contain the frame control + * field. + * + * @hdr: the frame + */ +static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) +{ + u8 *raw = (u8 *) hdr; + u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */ + + if (to_ds) + return hdr->addr3; + return hdr->addr1; +} + +/** + * ieee80211_get_morefrag - determine whether the MOREFRAGS bit is set + * + * This function determines whether the "more fragments" bit is set + * in the frame. + * + * @hdr: the frame + */ +static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr) +{ + return (le16_to_cpu(hdr->frame_control) & + IEEE80211_FCTL_MOREFRAGS) != 0; +} + +#endif /* IEEE80211_H */ diff --git a/package/mac80211/src/include/linux/nl80211.h b/package/mac80211/src/include/linux/nl80211.h new file mode 100644 index 0000000000..a5dd030d50 --- /dev/null +++ b/package/mac80211/src/include/linux/nl80211.h @@ -0,0 +1,129 @@ +#ifndef __LINUX_NL80211_H +#define __LINUX_NL80211_H +/* + * 802.11 netlink interface public header + * + * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net> + */ + +/** + * enum nl80211_commands - supported nl80211 commands + * + * @NL80211_CMD_UNSPEC: unspecified command to catch errors + * + * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request + * to get a list of all present wiphys. + * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and + * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request + * or rename notification. Has attributes %NL80211_ATTR_WIPHY and + * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. + * + * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; + * either a dump request on a %NL80211_ATTR_WIPHY or a specific get + * on an %NL80211_ATTR_IFINDEX is supported. + * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires + %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. + * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response + * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also + * be sent from userspace to request creation of a new virtual interface, + * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and + * %NL80211_ATTR_IFNAME. + * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from + * userspace to request deletion of a virtual interface, then requires + * attribute %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +enum nl80211_commands { +/* don't change the order or add anything inbetween, this is ABI! */ + NL80211_CMD_UNSPEC, + + NL80211_CMD_GET_WIPHY, /* can dump */ + NL80211_CMD_SET_WIPHY, + NL80211_CMD_NEW_WIPHY, + NL80211_CMD_DEL_WIPHY, + + NL80211_CMD_GET_INTERFACE, /* can dump */ + NL80211_CMD_SET_INTERFACE, + NL80211_CMD_NEW_INTERFACE, + NL80211_CMD_DEL_INTERFACE, + + /* add commands here */ + + /* used to define NL80211_CMD_MAX below */ + __NL80211_CMD_AFTER_LAST, + NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 +}; + + +/** + * enum nl80211_attrs - nl80211 netlink attributes + * + * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. + * /sys/class/ieee80211/<phyname>/index + * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) + * + * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on + * @NL80211_ATTR_IFNAME: network interface name + * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype + * + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use + */ +enum nl80211_attrs { +/* don't change the order or add anything inbetween, this is ABI! */ + NL80211_ATTR_UNSPEC, + + NL80211_ATTR_WIPHY, + NL80211_ATTR_WIPHY_NAME, + + NL80211_ATTR_IFINDEX, + NL80211_ATTR_IFNAME, + NL80211_ATTR_IFTYPE, + + /* add attributes here, update the policy in nl80211.c */ + + __NL80211_ATTR_AFTER_LAST, + NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_iftype - (virtual) interface types + * + * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides + * @NL80211_IFTYPE_ADHOC: independent BSS member + * @NL80211_IFTYPE_STATION: managed BSS member + * @NL80211_IFTYPE_AP: access point + * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points + * @NL80211_IFTYPE_WDS: wireless distribution interface + * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames + * @NL80211_IFTYPE_MAX: highest interface type number currently defined + * @__NL80211_IFTYPE_AFTER_LAST: internal use + * + * These values are used with the %NL80211_ATTR_IFTYPE + * to set the type of an interface. + * + */ +enum nl80211_iftype { + NL80211_IFTYPE_UNSPECIFIED, + NL80211_IFTYPE_ADHOC, + NL80211_IFTYPE_STATION, + NL80211_IFTYPE_AP, + NL80211_IFTYPE_AP_VLAN, + NL80211_IFTYPE_WDS, + NL80211_IFTYPE_MONITOR, + + /* keep last */ + __NL80211_IFTYPE_AFTER_LAST, + NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1 +}; + +#endif /* __LINUX_NL80211_H */ diff --git a/package/mac80211/src/include/net/cfg80211.h b/package/mac80211/src/include/net/cfg80211.h new file mode 100644 index 0000000000..d30960e175 --- /dev/null +++ b/package/mac80211/src/include/net/cfg80211.h @@ -0,0 +1,83 @@ +#ifndef __NET_CFG80211_H +#define __NET_CFG80211_H + +#include <linux/netlink.h> +#include <linux/skbuff.h> +#include <linux/nl80211.h> +#include <net/genetlink.h> + +/* + * 802.11 configuration in-kernel interface + * + * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net> + */ + +/* Radiotap header iteration + * implemented in net/wireless/radiotap.c + * docs in Documentation/networking/radiotap-headers.txt + */ +/** + * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args + * @rtheader: pointer to the radiotap header we are walking through + * @max_length: length of radiotap header in cpu byte ordering + * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg + * @this_arg: pointer to current radiotap arg + * @arg_index: internal next argument index + * @arg: internal next argument pointer + * @next_bitmap: internal pointer to next present u32 + * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + */ + +struct ieee80211_radiotap_iterator { + struct ieee80211_radiotap_header *rtheader; + int max_length; + int this_arg_index; + u8 *this_arg; + + int arg_index; + u8 *arg; + __le32 *next_bitmap; + u32 bitmap_shifter; +}; + +extern int ieee80211_radiotap_iterator_init( + struct ieee80211_radiotap_iterator *iterator, + struct ieee80211_radiotap_header *radiotap_header, + int max_length); + +extern int ieee80211_radiotap_iterator_next( + struct ieee80211_radiotap_iterator *iterator); + + +/* from net/wireless.h */ +struct wiphy; + +/** + * struct cfg80211_ops - backend description for wireless configuration + * + * This struct is registered by fullmac card drivers and/or wireless stacks + * in order to handle configuration requests on their interfaces. + * + * All callbacks except where otherwise noted should return 0 + * on success or a negative error code. + * + * All operations are currently invoked under rtnl for consistency with the + * wireless extensions but this is subject to reevaluation as soon as this + * code is used more widely and we have a first user without wext. + * + * @add_virtual_intf: create a new virtual interface with the given name + * + * @del_virtual_intf: remove the virtual interface determined by ifindex. + * + * @change_virtual_intf: change type of virtual interface + * + */ +struct cfg80211_ops { + int (*add_virtual_intf)(struct wiphy *wiphy, char *name, + enum nl80211_iftype type); + int (*del_virtual_intf)(struct wiphy *wiphy, int ifindex); + int (*change_virtual_intf)(struct wiphy *wiphy, int ifindex, + enum nl80211_iftype type); +}; + +#endif /* __NET_CFG80211_H */ diff --git a/package/mac80211/src/include/net/ieee80211_radiotap.h b/package/mac80211/src/include/net/ieee80211_radiotap.h new file mode 100644 index 0000000000..dfd8bf66ce --- /dev/null +++ b/package/mac80211/src/include/net/ieee80211_radiotap.h @@ -0,0 +1,268 @@ +/* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */ +/* $NetBSD: ieee80211_radiotap.h,v 1.11 2005/06/22 06:16:02 dyoung Exp $ */ + +/*- + * Copyright (c) 2003, 2004 David Young. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of David Young may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID + * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ + +/* + * Modifications to fit into the linux IEEE 802.11 stack, + * Mike Kershaw (dragorn@kismetwireless.net) + */ + +#ifndef IEEE80211RADIOTAP_H +#define IEEE80211RADIOTAP_H + +#include <linux/if_ether.h> +#include <linux/kernel.h> +#include <asm/unaligned.h> + +/* Radiotap header version (from official NetBSD feed) */ +#define IEEE80211RADIOTAP_VERSION "1.5" +/* Base version of the radiotap packet header data */ +#define PKTHDR_RADIOTAP_VERSION 0 + +/* A generic radio capture format is desirable. There is one for + * Linux, but it is neither rigidly defined (there were not even + * units given for some fields) nor easily extensible. + * + * I suggest the following extensible radio capture format. It is + * based on a bitmap indicating which fields are present. + * + * I am trying to describe precisely what the application programmer + * should expect in the following, and for that reason I tell the + * units and origin of each measurement (where it applies), or else I + * use sufficiently weaselly language ("is a monotonically nondecreasing + * function of...") that I cannot set false expectations for lawyerly + * readers. + */ + +/* XXX tcpdump/libpcap do not tolerate variable-length headers, + * yet, so we pad every radiotap header to 64 bytes. Ugh. + */ +#define IEEE80211_RADIOTAP_HDRLEN 64 + +/* The radio capture header precedes the 802.11 header. + * All data in the header is little endian on all platforms. + */ +struct ieee80211_radiotap_header { + u8 it_version; /* Version 0. Only increases + * for drastic changes, + * introduction of compatible + * new fields does not count. + */ + u8 it_pad; + __le16 it_len; /* length of the whole + * header in bytes, including + * it_version, it_pad, + * it_len, and data fields. + */ + __le32 it_present; /* A bitmap telling which + * fields are present. Set bit 31 + * (0x80000000) to extend the + * bitmap by another 32 bits. + * Additional extensions are made + * by setting bit 31. + */ +}; + +/* Name Data type Units + * ---- --------- ----- + * + * IEEE80211_RADIOTAP_TSFT __le64 microseconds + * + * Value in microseconds of the MAC's 64-bit 802.11 Time + * Synchronization Function timer when the first bit of the + * MPDU arrived at the MAC. For received frames, only. + * + * IEEE80211_RADIOTAP_CHANNEL 2 x __le16 MHz, bitmap + * + * Tx/Rx frequency in MHz, followed by flags (see below). + * + * IEEE80211_RADIOTAP_FHSS __le16 see below + * + * For frequency-hopping radios, the hop set (first byte) + * and pattern (second byte). + * + * IEEE80211_RADIOTAP_RATE u8 500kb/s + * + * Tx/Rx data rate + * + * IEEE80211_RADIOTAP_DBM_ANTSIGNAL s8 decibels from + * one milliwatt (dBm) + * + * RF signal power at the antenna, decibel difference from + * one milliwatt. + * + * IEEE80211_RADIOTAP_DBM_ANTNOISE s8 decibels from + * one milliwatt (dBm) + * + * RF noise power at the antenna, decibel difference from one + * milliwatt. + * + * IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB) + * + * RF signal power at the antenna, decibel difference from an + * arbitrary, fixed reference. + * + * IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB) + * + * RF noise power at the antenna, decibel difference from an + * arbitrary, fixed reference point. + * + * IEEE80211_RADIOTAP_LOCK_QUALITY __le16 unitless + * + * Quality of Barker code lock. Unitless. Monotonically + * nondecreasing with "better" lock strength. Called "Signal + * Quality" in datasheets. (Is there a standard way to measure + * this?) + * + * IEEE80211_RADIOTAP_TX_ATTENUATION __le16 unitless + * + * Transmit power expressed as unitless distance from max + * power set at factory calibration. 0 is max power. + * Monotonically nondecreasing with lower power levels. + * + * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16 decibels (dB) + * + * Transmit power expressed as decibel distance from max power + * set at factory calibration. 0 is max power. Monotonically + * nondecreasing with lower power levels. + * + * IEEE80211_RADIOTAP_DBM_TX_POWER s8 decibels from + * one milliwatt (dBm) + * + * Transmit power expressed as dBm (decibels from a 1 milliwatt + * reference). This is the absolute power level measured at + * the antenna port. + * + * IEEE80211_RADIOTAP_FLAGS u8 bitmap + * + * Properties of transmitted and received frames. See flags + * defined below. + * + * IEEE80211_RADIOTAP_ANTENNA u8 antenna index + * + * Unitless indication of the Rx/Tx antenna for this packet. + * The first antenna is antenna 0. + * + * IEEE80211_RADIOTAP_RX_FLAGS __le16 bitmap + * + * Properties of received frames. See flags defined below. + * + * IEEE80211_RADIOTAP_TX_FLAGS __le16 bitmap + * + * Properties of transmitted frames. See flags defined below. + * + * IEEE80211_RADIOTAP_RTS_RETRIES u8 data + * + * Number of rts retries a transmitted frame used. + * + * IEEE80211_RADIOTAP_DATA_RETRIES u8 data + * + * Number of unicast retries a transmitted frame used. + * + */ +enum ieee80211_radiotap_type { + IEEE80211_RADIOTAP_TSFT = 0, + IEEE80211_RADIOTAP_FLAGS = 1, + IEEE80211_RADIOTAP_RATE = 2, + IEEE80211_RADIOTAP_CHANNEL = 3, + IEEE80211_RADIOTAP_FHSS = 4, + IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5, + IEEE80211_RADIOTAP_DBM_ANTNOISE = 6, + IEEE80211_RADIOTAP_LOCK_QUALITY = 7, + IEEE80211_RADIOTAP_TX_ATTENUATION = 8, + IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9, + IEEE80211_RADIOTAP_DBM_TX_POWER = 10, + IEEE80211_RADIOTAP_ANTENNA = 11, + IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12, + IEEE80211_RADIOTAP_DB_ANTNOISE = 13, + IEEE80211_RADIOTAP_RX_FLAGS = 14, + IEEE80211_RADIOTAP_TX_FLAGS = 15, + IEEE80211_RADIOTAP_RTS_RETRIES = 16, + IEEE80211_RADIOTAP_DATA_RETRIES = 17, + IEEE80211_RADIOTAP_EXT = 31 +}; + +/* Channel flags. */ +#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */ +#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */ +#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */ +#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */ +#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */ +#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */ +#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */ +#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */ + +/* For IEEE80211_RADIOTAP_FLAGS */ +#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received + * during CFP + */ +#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received + * with short + * preamble + */ +#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received + * with WEP encryption + */ +#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received + * with fragmentation + */ +#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */ +#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between + * 802.11 header and payload + * (to 32-bit boundary) + */ +/* For IEEE80211_RADIOTAP_RX_FLAGS */ +#define IEEE80211_RADIOTAP_F_RX_BADFCS 0x0001 /* frame failed crc check */ + +/* For IEEE80211_RADIOTAP_TX_FLAGS */ +#define IEEE80211_RADIOTAP_F_TX_FAIL 0x0001 /* failed due to excessive + * retries */ +#define IEEE80211_RADIOTAP_F_TX_CTS 0x0002 /* used cts 'protection' */ +#define IEEE80211_RADIOTAP_F_TX_RTS 0x0004 /* used rts/cts handshake */ + +/* Ugly macro to convert literal channel numbers into their mhz equivalents + * There are certianly some conditions that will break this (like feeding it '30') + * but they shouldn't arise since nothing talks on channel 30. */ +#define ieee80211chan2mhz(x) \ + (((x) <= 14) ? \ + (((x) == 14) ? 2484 : ((x) * 5) + 2407) : \ + ((x) + 1000) * 5) + +/* helpers */ +static inline int ieee80211_get_radiotap_len(unsigned char *data) +{ + struct ieee80211_radiotap_header *hdr = + (struct ieee80211_radiotap_header *)data; + + return le16_to_cpu(get_unaligned(&hdr->it_len)); +} + +#endif /* IEEE80211_RADIOTAP_H */ diff --git a/package/mac80211/src/include/net/mac80211.h b/package/mac80211/src/include/net/mac80211.h new file mode 100644 index 0000000000..2b1bffbf5e --- /dev/null +++ b/package/mac80211/src/include/net/mac80211.h @@ -0,0 +1,1429 @@ +/* + * mac80211 <-> driver interface + * + * Copyright 2002-2005, Devicescape Software, Inc. + * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> + * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MAC80211_H +#define MAC80211_H + +#include <linux/kernel.h> +#include <linux/if_ether.h> +#include <linux/skbuff.h> +#include <linux/wireless.h> +#include <linux/device.h> +#include <linux/ieee80211.h> +#include <net/wireless.h> +#include <net/cfg80211.h> + +/** + * DOC: Introduction + * + * mac80211 is the Linux stack for 802.11 hardware that implements + * only partial functionality in hard- or firmware. This document + * defines the interface between mac80211 and low-level hardware + * drivers. + */ + +/** + * DOC: Calling mac80211 from interrupts + * + * Only ieee80211_tx_status_irqsafe() and ieee80211_rx_irqsafe() can be + * called in hardware interrupt context. The low-level driver must not call any + * other functions in hardware interrupt context. If there is a need for such + * call, the low-level driver should first ACK the interrupt and perform the + * IEEE 802.11 code call after this, e.g. from a scheduled workqueue function. + */ + +/** + * DOC: Warning + * + * If you're reading this document and not the header file itself, it will + * be incomplete because not all documentation has been converted yet. + */ + +/** + * DOC: Frame format + * + * As a general rule, when frames are passed between mac80211 and the driver, + * they start with the IEEE 802.11 header and include the same octets that are + * sent over the air except for the FCS which should be calculated by the + * hardware. + * + * There are, however, various exceptions to this rule for advanced features: + * + * The first exception is for hardware encryption and decryption offload + * where the IV/ICV may or may not be generated in hardware. + * + * Secondly, when the hardware handles fragmentation, the frame handed to + * the driver from mac80211 is the MSDU, not the MPDU. + * + * Finally, for received frames, the driver is able to indicate that it has + * filled a radiotap header and put that in front of the frame; if it does + * not do so then mac80211 may add this under certain circumstances. + */ + +#define IEEE80211_CHAN_W_SCAN 0x00000001 +#define IEEE80211_CHAN_W_ACTIVE_SCAN 0x00000002 +#define IEEE80211_CHAN_W_IBSS 0x00000004 + +/* Channel information structure. Low-level driver is expected to fill in chan, + * freq, and val fields. Other fields will be filled in by 80211.o based on + * hostapd information and low-level driver does not need to use them. The + * limits for each channel will be provided in 'struct ieee80211_conf' when + * configuring the low-level driver with hw->config callback. If a device has + * a default regulatory domain, IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED + * can be set to let the driver configure all fields */ +struct ieee80211_channel { + short chan; /* channel number (IEEE 802.11) */ + short freq; /* frequency in MHz */ + int val; /* hw specific value for the channel */ + int flag; /* flag for hostapd use (IEEE80211_CHAN_*) */ + unsigned char power_level; + unsigned char antenna_max; +}; + +#define IEEE80211_RATE_ERP 0x00000001 +#define IEEE80211_RATE_BASIC 0x00000002 +#define IEEE80211_RATE_PREAMBLE2 0x00000004 +#define IEEE80211_RATE_SUPPORTED 0x00000010 +#define IEEE80211_RATE_OFDM 0x00000020 +#define IEEE80211_RATE_CCK 0x00000040 +#define IEEE80211_RATE_MANDATORY 0x00000100 + +#define IEEE80211_RATE_CCK_2 (IEEE80211_RATE_CCK | IEEE80211_RATE_PREAMBLE2) +#define IEEE80211_RATE_MODULATION(f) \ + (f & (IEEE80211_RATE_CCK | IEEE80211_RATE_OFDM)) + +/* Low-level driver should set PREAMBLE2, OFDM and CCK flags. + * BASIC, SUPPORTED, ERP, and MANDATORY flags are set in 80211.o based on the + * configuration. */ +struct ieee80211_rate { + int rate; /* rate in 100 kbps */ + int val; /* hw specific value for the rate */ + int flags; /* IEEE80211_RATE_ flags */ + int val2; /* hw specific value for the rate when using short preamble + * (only when IEEE80211_RATE_PREAMBLE2 flag is set, i.e., for + * 2, 5.5, and 11 Mbps) */ + signed char min_rssi_ack; + unsigned char min_rssi_ack_delta; + + /* following fields are set by 80211.o and need not be filled by the + * low-level driver */ + int rate_inv; /* inverse of the rate (LCM(all rates) / rate) for + * optimizing channel utilization estimates */ +}; + +/** + * enum ieee80211_phymode - PHY modes + * + * @MODE_IEEE80211A: 5GHz as defined by 802.11a/802.11h + * @MODE_IEEE80211B: 2.4 GHz as defined by 802.11b + * @MODE_IEEE80211G: 2.4 GHz as defined by 802.11g (with OFDM), + * backwards compatible with 11b mode + * @NUM_IEEE80211_MODES: internal + */ +enum ieee80211_phymode { + MODE_IEEE80211A, + MODE_IEEE80211B, + MODE_IEEE80211G, + + /* keep last */ + NUM_IEEE80211_MODES +}; + +/** + * struct ieee80211_hw_mode - PHY mode definition + * + * This structure describes the capabilities supported by the device + * in a single PHY mode. + * + * @mode: the PHY mode for this definition + * @num_channels: number of supported channels + * @channels: pointer to array of supported channels + * @num_rates: number of supported bitrates + * @rates: pointer to array of supported bitrates + * @list: internal + */ +struct ieee80211_hw_mode { + struct list_head list; + struct ieee80211_channel *channels; + struct ieee80211_rate *rates; + enum ieee80211_phymode mode; + int num_channels; + int num_rates; +}; + +/** + * struct ieee80211_tx_queue_params - transmit queue configuration + * + * The information provided in this structure is required for QoS + * transmit queue configuration. + * + * @aifs: arbitration interface space [0..255, -1: use default] + * @cw_min: minimum contention window [will be a value of the form + * 2^n-1 in the range 1..1023; 0: use default] + * @cw_max: maximum contention window [like @cw_min] + * @burst_time: maximum burst time in units of 0.1ms, 0 meaning disabled + */ +struct ieee80211_tx_queue_params { + int aifs; + int cw_min; + int cw_max; + int burst_time; +}; + +/** + * struct ieee80211_tx_queue_stats_data - transmit queue statistics + * + * @len: number of packets in queue + * @limit: queue length limit + * @count: number of frames sent + */ +struct ieee80211_tx_queue_stats_data { + unsigned int len; + unsigned int limit; + unsigned int count; +}; + +/** + * enum ieee80211_tx_queue - transmit queue number + * + * These constants are used with some callbacks that take a + * queue number to set parameters for a queue. + * + * @IEEE80211_TX_QUEUE_DATA0: data queue 0 + * @IEEE80211_TX_QUEUE_DATA1: data queue 1 + * @IEEE80211_TX_QUEUE_DATA2: data queue 2 + * @IEEE80211_TX_QUEUE_DATA3: data queue 3 + * @IEEE80211_TX_QUEUE_DATA4: data queue 4 + * @IEEE80211_TX_QUEUE_SVP: ?? + * @NUM_TX_DATA_QUEUES: number of data queues + * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be + * sent after a beacon + * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames + */ +enum ieee80211_tx_queue { + IEEE80211_TX_QUEUE_DATA0, + IEEE80211_TX_QUEUE_DATA1, + IEEE80211_TX_QUEUE_DATA2, + IEEE80211_TX_QUEUE_DATA3, + IEEE80211_TX_QUEUE_DATA4, + IEEE80211_TX_QUEUE_SVP, + + NUM_TX_DATA_QUEUES, + +/* due to stupidity in the sub-ioctl userspace interface, the items in + * this struct need to have fixed values. As soon as it is removed, we can + * fix these entries. */ + IEEE80211_TX_QUEUE_AFTER_BEACON = 6, + IEEE80211_TX_QUEUE_BEACON = 7 +}; + +struct ieee80211_tx_queue_stats { + struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES]; +}; + +struct ieee80211_low_level_stats { + unsigned int dot11ACKFailureCount; + unsigned int dot11RTSFailureCount; + unsigned int dot11FCSErrorCount; + unsigned int dot11RTSSuccessCount; +}; + +/* Transmit control fields. This data structure is passed to low-level driver + * with each TX frame. The low-level driver is responsible for configuring + * the hardware to use given values (depending on what is supported). */ + +struct ieee80211_tx_control { + int tx_rate; /* Transmit rate, given as the hw specific value for the + * rate (from struct ieee80211_rate) */ + int rts_cts_rate; /* Transmit rate for RTS/CTS frame, given as the hw + * specific value for the rate (from + * struct ieee80211_rate) */ + +#define IEEE80211_TXCTL_REQ_TX_STATUS (1<<0)/* request TX status callback for + * this frame */ +#define IEEE80211_TXCTL_DO_NOT_ENCRYPT (1<<1) /* send this frame without + * encryption; e.g., for EAPOL + * frames */ +#define IEEE80211_TXCTL_USE_RTS_CTS (1<<2) /* use RTS-CTS before sending + * frame */ +#define IEEE80211_TXCTL_USE_CTS_PROTECT (1<<3) /* use CTS protection for the + * frame (e.g., for combined + * 802.11g / 802.11b networks) */ +#define IEEE80211_TXCTL_NO_ACK (1<<4) /* tell the low level not to + * wait for an ack */ +#define IEEE80211_TXCTL_RATE_CTRL_PROBE (1<<5) +#define IEEE80211_TXCTL_CLEAR_DST_MASK (1<<6) +#define IEEE80211_TXCTL_REQUEUE (1<<7) +#define IEEE80211_TXCTL_FIRST_FRAGMENT (1<<8) /* this is a first fragment of + * the frame */ +#define IEEE80211_TXCTL_LONG_RETRY_LIMIT (1<<10) /* this frame should be send + * using the through + * set_retry_limit configured + * long retry value */ + u32 flags; /* tx control flags defined + * above */ + u8 key_idx; /* keyidx from hw->set_key(), undefined if + * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ + u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. + * This could be used when set_retry_limit + * is not implemented by the driver */ + u8 power_level; /* per-packet transmit power level, in dBm */ + u8 antenna_sel_tx; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */ + u8 icv_len; /* length of the ICV/MIC field in octets */ + u8 iv_len; /* length of the IV field in octets */ + u8 queue; /* hardware queue to use for this frame; + * 0 = highest, hw->queues-1 = lowest */ + struct ieee80211_rate *rate; /* internal 80211.o rate */ + struct ieee80211_rate *rts_rate; /* internal 80211.o rate + * for RTS/CTS */ + int alt_retry_rate; /* retry rate for the last retries, given as the + * hw specific value for the rate (from + * struct ieee80211_rate). To be used to limit + * packet dropping when probing higher rates, if hw + * supports multiple retry rates. -1 = not used */ + int type; /* internal */ + int ifindex; /* internal */ +}; + + +/** + * enum mac80211_rx_flags - receive flags + * + * These flags are used with the @flag member of &struct ieee80211_rx_status. + * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame. + * Use together with %RX_FLAG_MMIC_STRIPPED. + * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware. + * @RX_FLAG_RADIOTAP: This frame starts with a radiotap header. + * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame, + * verification has been done by the hardware. + * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame. + * If this flag is set, the stack cannot do any replay detection + * hence the driver or hardware will have to do that. + * @RX_FLAG_FAILED_FCS_CRC: Set this flag if the FCS check failed on + * the frame. + * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on + * the frame. + */ +enum mac80211_rx_flags { + RX_FLAG_MMIC_ERROR = 1<<0, + RX_FLAG_DECRYPTED = 1<<1, + RX_FLAG_RADIOTAP = 1<<2, + RX_FLAG_MMIC_STRIPPED = 1<<3, + RX_FLAG_IV_STRIPPED = 1<<4, + RX_FLAG_FAILED_FCS_CRC = 1<<5, + RX_FLAG_FAILED_PLCP_CRC = 1<<6, +}; + +/** + * struct ieee80211_rx_status - receive status + * + * The low-level driver should provide this information (the subset + * supported by hardware) to the 802.11 code with each received + * frame. + * @mactime: MAC timestamp as defined by 802.11 + * @freq: frequency the radio was tuned to when receiving this frame, in MHz + * @channel: channel the radio was tuned to + * @phymode: active PHY mode + * @ssi: signal strength when receiving this frame + * @signal: used as 'qual' in statistics reporting + * @noise: PHY noise when receiving this frame + * @antenna: antenna used + * @rate: data rate + * @flag: %RX_FLAG_* + */ +struct ieee80211_rx_status { + u64 mactime; + int freq; + int channel; + enum ieee80211_phymode phymode; + int ssi; + int signal; + int noise; + int antenna; + int rate; + int flag; +}; + +/** + * enum ieee80211_tx_status_flags - transmit status flags + * + * Status flags to indicate various transmit conditions. + * + * @IEEE80211_TX_STATUS_TX_FILTERED: The frame was not transmitted + * because the destination STA was in powersave mode. + * + * @IEEE80211_TX_STATUS_ACK: Frame was acknowledged + */ +enum ieee80211_tx_status_flags { + IEEE80211_TX_STATUS_TX_FILTERED = 1<<0, + IEEE80211_TX_STATUS_ACK = 1<<1, +}; + +/** + * struct ieee80211_tx_status - transmit status + * + * As much information as possible should be provided for each transmitted + * frame with ieee80211_tx_status(). + * + * @control: a copy of the &struct ieee80211_tx_control passed to the driver + * in the tx() callback. + * + * @flags: transmit status flags, defined above + * + * @ack_signal: signal strength of the ACK frame + * + * @excessive_retries: set to 1 if the frame was retried many times + * but not acknowledged + * + * @retry_count: number of retries + * + * @queue_length: ?? REMOVE + * @queue_number: ?? REMOVE + */ +struct ieee80211_tx_status { + struct ieee80211_tx_control control; + u8 flags; + bool excessive_retries; + u8 retry_count; + int ack_signal; + int queue_length; + int queue_number; +}; + +/** + * enum ieee80211_conf_flags - configuration flags + * + * Flags to define PHY configuration options + * + * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time + * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) + * + */ +enum ieee80211_conf_flags { + IEEE80211_CONF_SHORT_SLOT_TIME = 1<<0, + IEEE80211_CONF_RADIOTAP = 1<<1, +}; + +/** + * struct ieee80211_conf - configuration of the device + * + * This struct indicates how the driver shall configure the hardware. + * + * @radio_enabled: when zero, driver is required to switch off the radio. + * TODO make a flag + * @channel: IEEE 802.11 channel number + * @freq: frequency in MHz + * @channel_val: hardware specific channel value for the channel + * @phymode: PHY mode to activate (REMOVE) + * @chan: channel to switch to, pointer to the channel information + * @mode: pointer to mode definition + * @regulatory_domain: ?? + * @beacon_int: beacon interval (TODO make interface config) + * @flags: configuration flags defined above + * @power_level: transmit power limit for current regulatory domain in dBm + * @antenna_max: maximum antenna gain + * @antenna_sel_tx: transmit antenna selection, 0: default/diversity, + * 1/2: antenna 0/1 + * @antenna_sel_rx: receive antenna selection, like @antenna_sel_tx + */ +struct ieee80211_conf { + int channel; /* IEEE 802.11 channel number */ + int freq; /* MHz */ + int channel_val; /* hw specific value for the channel */ + + enum ieee80211_phymode phymode; + struct ieee80211_channel *chan; + struct ieee80211_hw_mode *mode; + unsigned int regulatory_domain; + int radio_enabled; + + int beacon_int; + u32 flags; + u8 power_level; + u8 antenna_max; + u8 antenna_sel_tx; + u8 antenna_sel_rx; +}; + +/** + * enum ieee80211_if_types - types of 802.11 network interfaces + * + * @IEEE80211_IF_TYPE_INVALID: invalid interface type, not used + * by mac80211 itself + * @IEEE80211_IF_TYPE_AP: interface in AP mode. + * @IEEE80211_IF_TYPE_MGMT: special interface for communication with hostap + * daemon. Drivers should never see this type. + * @IEEE80211_IF_TYPE_STA: interface in STA (client) mode. + * @IEEE80211_IF_TYPE_IBSS: interface in IBSS (ad-hoc) mode. + * @IEEE80211_IF_TYPE_MNTR: interface in monitor (rfmon) mode. + * @IEEE80211_IF_TYPE_WDS: interface in WDS mode. + * @IEEE80211_IF_TYPE_VLAN: VLAN interface bound to an AP, drivers + * will never see this type. + */ +enum ieee80211_if_types { + IEEE80211_IF_TYPE_INVALID, + IEEE80211_IF_TYPE_AP, + IEEE80211_IF_TYPE_STA, + IEEE80211_IF_TYPE_IBSS, + IEEE80211_IF_TYPE_MNTR, + IEEE80211_IF_TYPE_WDS, + IEEE80211_IF_TYPE_VLAN, +}; + +/** + * struct ieee80211_if_init_conf - initial configuration of an interface + * + * @if_id: internal interface ID. This number has no particular meaning to + * drivers and the only allowed usage is to pass it to + * ieee80211_beacon_get() and ieee80211_get_buffered_bc() functions. + * This field is not valid for monitor interfaces + * (interfaces of %IEEE80211_IF_TYPE_MNTR type). + * @type: one of &enum ieee80211_if_types constants. Determines the type of + * added/removed interface. + * @mac_addr: pointer to MAC address of the interface. This pointer is valid + * until the interface is removed (i.e. it cannot be used after + * remove_interface() callback was called for this interface). + * + * This structure is used in add_interface() and remove_interface() + * callbacks of &struct ieee80211_hw. + * + * When you allow multiple interfaces to be added to your PHY, take care + * that the hardware can actually handle multiple MAC addresses. However, + * also take care that when there's no interface left with mac_addr != %NULL + * you remove the MAC address from the device to avoid acknowledging packets + * in pure monitor mode. + */ +struct ieee80211_if_init_conf { + int if_id; + enum ieee80211_if_types type; + void *mac_addr; +}; + +/** + * struct ieee80211_if_conf - configuration of an interface + * + * @type: type of the interface. This is always the same as was specified in + * &struct ieee80211_if_init_conf. The type of an interface never changes + * during the life of the interface; this field is present only for + * convenience. + * @bssid: BSSID of the network we are associated to/creating. + * @ssid: used (together with @ssid_len) by drivers for hardware that + * generate beacons independently. The pointer is valid only during the + * config_interface() call, so copy the value somewhere if you need + * it. + * @ssid_len: length of the @ssid field. + * @beacon: beacon template. Valid only if @host_gen_beacon_template in + * &struct ieee80211_hw is set. The driver is responsible of freeing + * the sk_buff. + * @beacon_control: tx_control for the beacon template, this field is only + * valid when the @beacon field was set. + * + * This structure is passed to the config_interface() callback of + * &struct ieee80211_hw. + */ +struct ieee80211_if_conf { + int type; + u8 *bssid; + u8 *ssid; + size_t ssid_len; + struct sk_buff *beacon; + struct ieee80211_tx_control *beacon_control; +}; + +/** + * enum ieee80211_key_alg - key algorithm + * @ALG_WEP: WEP40 or WEP104 + * @ALG_TKIP: TKIP + * @ALG_CCMP: CCMP (AES) + */ +enum ieee80211_key_alg { + ALG_WEP, + ALG_TKIP, + ALG_CCMP, +}; + + +/** + * enum ieee80211_key_flags - key flags + * + * These flags are used for communication about keys between the driver + * and mac80211, with the @flags parameter of &struct ieee80211_key_conf. + * + * @IEEE80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates + * that the STA this key will be used with could be using QoS. + * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the + * driver to indicate that it requires IV generation for this + * particular key. + * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by + * the driver for a TKIP key if it requires Michael MIC + * generation in software. + */ +enum ieee80211_key_flags { + IEEE80211_KEY_FLAG_WMM_STA = 1<<0, + IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1, + IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, +}; + +/** + * struct ieee80211_key_conf - key information + * + * This key information is given by mac80211 to the driver by + * the set_key() callback in &struct ieee80211_ops. + * + * @hw_key_idx: To be set by the driver, this is the key index the driver + * wants to be given when a frame is transmitted and needs to be + * encrypted in hardware. + * @alg: The key algorithm. + * @flags: key flags, see &enum ieee80211_key_flags. + * @keyidx: the key index (0-3) + * @keylen: key material length + * @key: key material + */ +struct ieee80211_key_conf { + enum ieee80211_key_alg alg; + u8 hw_key_idx; + u8 flags; + s8 keyidx; + u8 keylen; + u8 key[0]; +}; + +#define IEEE80211_SEQ_COUNTER_RX 0 +#define IEEE80211_SEQ_COUNTER_TX 1 + +/** + * enum set_key_cmd - key command + * + * Used with the set_key() callback in &struct ieee80211_ops, this + * indicates whether a key is being removed or added. + * + * @SET_KEY: a key is set + * @DISABLE_KEY: a key must be disabled + */ +enum set_key_cmd { + SET_KEY, DISABLE_KEY, +}; + +/** + * enum sta_notify_cmd - sta notify command + * + * Used with the sta_notify() callback in &struct ieee80211_ops, this + * indicates addition and removal of a station to station table + * + * @STA_NOTIFY_ADD: a station was added to the station table + * @STA_NOTIFY_REMOVE: a station being removed from the station table + */ +enum sta_notify_cmd { + STA_NOTIFY_ADD, STA_NOTIFY_REMOVE +}; + +/** + * enum ieee80211_hw_flags - hardware flags + * + * These flags are used to indicate hardware capabilities to + * the stack. Generally, flags here should have their meaning + * done in a way that the simplest hardware doesn't need setting + * any particular flags. There are some exceptions to this rule, + * however, so you are advised to review these flags carefully. + * + * @IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE: + * The device only needs to be supplied with a beacon template. + * If you need the host to generate each beacon then don't use + * this flag and call ieee80211_beacon_get() when you need the + * next beacon frame. Note that if you set this flag, you must + * implement the set_tim() callback for powersave mode to work + * properly. + * This flag is only relevant for access-point mode. + * + * @IEEE80211_HW_RX_INCLUDES_FCS: + * Indicates that received frames passed to the stack include + * the FCS at the end. + * + * @IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING: + * Some wireless LAN chipsets buffer broadcast/multicast frames + * for power saving stations in the hardware/firmware and others + * rely on the host system for such buffering. This option is used + * to configure the IEEE 802.11 upper layer to buffer broadcast and + * multicast frames when there are power saving stations so that + * the driver can fetch them with ieee80211_get_buffered_bc(). Note + * that not setting this flag works properly only when the + * %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is also not set because + * otherwise the stack will not know when the DTIM beacon was sent. + * + * @IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED: + * Channels are already configured to the default regulatory domain + * specified in the device's EEPROM + */ +enum ieee80211_hw_flags { + IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0, + IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, + IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED = 1<<3, +}; + +/** + * struct ieee80211_hw - hardware information and state + * + * This structure contains the configuration and hardware + * information for an 802.11 PHY. + * + * @wiphy: This points to the &struct wiphy allocated for this + * 802.11 PHY. You must fill in the @perm_addr and @dev + * members of this structure using SET_IEEE80211_DEV() + * and SET_IEEE80211_PERM_ADDR(). + * + * @conf: &struct ieee80211_conf, device configuration, don't use. + * + * @workqueue: single threaded workqueue available for driver use, + * allocated by mac80211 on registration and flushed on + * unregistration. + * + * @priv: pointer to private area that was allocated for driver use + * along with this structure. + * + * @flags: hardware flags, see &enum ieee80211_hw_flags. + * + * @extra_tx_headroom: headroom to reserve in each transmit skb + * for use by the driver (e.g. for transmit headers.) + * + * @channel_change_time: time (in microseconds) it takes to change channels. + * + * @max_rssi: Maximum value for ssi in RX information, use + * negative numbers for dBm and 0 to indicate no support. + * + * @max_signal: like @max_rssi, but for the signal value. + * + * @max_noise: like @max_rssi, but for the noise value. + * + * @queues: number of available hardware transmit queues for + * data packets. WMM/QoS requires at least four. + */ +struct ieee80211_hw { + struct ieee80211_conf conf; + struct wiphy *wiphy; + struct workqueue_struct *workqueue; + void *priv; + u32 flags; + unsigned int extra_tx_headroom; + int channel_change_time; + u8 queues; + s8 max_rssi; + s8 max_signal; + s8 max_noise; +}; + +/** + * SET_IEEE80211_DEV - set device for 802.11 hardware + * + * @hw: the &struct ieee80211_hw to set the device for + * @dev: the &struct device of this 802.11 device + */ +static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev) +{ + set_wiphy_dev(hw->wiphy, dev); +} + +/** + * SET_IEEE80211_PERM_ADDR - set the permanenet MAC address for 802.11 hardware + * + * @hw: the &struct ieee80211_hw to set the MAC address for + * @addr: the address to set + */ +static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) +{ + memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN); +} + +/** + * DOC: Hardware crypto acceleration + * + * mac80211 is capable of taking advantage of many hardware + * acceleration designs for encryption and decryption operations. + * + * The set_key() callback in the &struct ieee80211_ops for a given + * device is called to enable hardware acceleration of encryption and + * decryption. The callback takes an @address parameter that will be + * the broadcast address for default keys, the other station's hardware + * address for individual keys or the zero address for keys that will + * be used only for transmission. + * Multiple transmission keys with the same key index may be used when + * VLANs are configured for an access point. + * + * The @local_address parameter will always be set to our own address, + * this is only relevant if you support multiple local addresses. + * + * When transmitting, the TX control data will use the @hw_key_idx + * selected by the driver by modifying the &struct ieee80211_key_conf + * pointed to by the @key parameter to the set_key() function. + * + * The set_key() call for the %SET_KEY command should return 0 if + * the key is now in use, -%EOPNOTSUPP or -%ENOSPC if it couldn't be + * added; if you return 0 then hw_key_idx must be assigned to the + * hardware key index, you are free to use the full u8 range. + * + * When the cmd is %DISABLE_KEY then it must succeed. + * + * Note that it is permissible to not decrypt a frame even if a key + * for it has been uploaded to hardware, the stack will not make any + * decision based on whether a key has been uploaded or not but rather + * based on the receive flags. + * + * The &struct ieee80211_key_conf structure pointed to by the @key + * parameter is guaranteed to be valid until another call to set_key() + * removes it, but it can only be used as a cookie to differentiate + * keys. + */ + +/** + * DOC: Frame filtering + * + * mac80211 requires to see many management frames for proper + * operation, and users may want to see many more frames when + * in monitor mode. However, for best CPU usage and power consumption, + * having as few frames as possible percolate through the stack is + * desirable. Hence, the hardware should filter as much as possible. + * + * To achieve this, mac80211 uses filter flags (see below) to tell + * the driver's configure_filter() function which frames should be + * passed to mac80211 and which should be filtered out. + * + * The configure_filter() callback is invoked with the parameters + * @mc_count and @mc_list for the combined multicast address list + * of all virtual interfaces, @changed_flags telling which flags + * were changed and @total_flags with the new flag states. + * + * If your device has no multicast address filters your driver will + * need to check both the %FIF_ALLMULTI flag and the @mc_count + * parameter to see whether multicast frames should be accepted + * or dropped. + * + * All unsupported flags in @total_flags must be cleared, i.e. you + * should clear all bits except those you honoured. + */ + +/** + * enum ieee80211_filter_flags - hardware filter flags + * + * These flags determine what the filter in hardware should be + * programmed to let through and what should not be passed to the + * stack. It is always safe to pass more frames than requested, + * but this has negative impact on power consumption. + * + * @FIF_PROMISC_IN_BSS: promiscuous mode within your BSS, + * think of the BSS as your network segment and then this corresponds + * to the regular ethernet device promiscuous mode. + * + * @FIF_ALLMULTI: pass all multicast frames, this is used if requested + * by the user or if the hardware is not capable of filtering by + * multicast address. + * + * @FIF_FCSFAIL: pass frames with failed FCS (but you need to set the + * %RX_FLAG_FAILED_FCS_CRC for them) + * + * @FIF_PLCPFAIL: pass frames with failed PLCP CRC (but you need to set + * the %RX_FLAG_FAILED_PLCP_CRC for them + * + * @FIF_BCN_PRBRESP_PROMISC: This flag is set during scanning to indicate + * to the hardware that it should not filter beacons or probe responses + * by BSSID. Filtering them can greatly reduce the amount of processing + * mac80211 needs to do and the amount of CPU wakeups, so you should + * honour this flag if possible. + * + * @FIF_CONTROL: pass control frames, if PROMISC_IN_BSS is not set then + * only those addressed to this station + * + * @FIF_OTHER_BSS: pass frames destined to other BSSes + */ +enum ieee80211_filter_flags { + FIF_PROMISC_IN_BSS = 1<<0, + FIF_ALLMULTI = 1<<1, + FIF_FCSFAIL = 1<<2, + FIF_PLCPFAIL = 1<<3, + FIF_BCN_PRBRESP_PROMISC = 1<<4, + FIF_CONTROL = 1<<5, + FIF_OTHER_BSS = 1<<6, +}; + +/** + * enum ieee80211_erp_change_flags - erp change flags + * + * These flags are used with the erp_ie_changed() callback in + * &struct ieee80211_ops to indicate which parameter(s) changed. + * @IEEE80211_ERP_CHANGE_PROTECTION: protection changed + * @IEEE80211_ERP_CHANGE_PREAMBLE: barker preamble mode changed + */ +enum ieee80211_erp_change_flags { + IEEE80211_ERP_CHANGE_PROTECTION = 1<<0, + IEEE80211_ERP_CHANGE_PREAMBLE = 1<<1, +}; + + +/** + * struct ieee80211_ops - callbacks from mac80211 to the driver + * + * This structure contains various callbacks that the driver may + * handle or, in some cases, must handle, for example to configure + * the hardware to a new channel or to transmit a frame. + * + * @tx: Handler that 802.11 module calls for each transmitted frame. + * skb contains the buffer starting from the IEEE 802.11 header. + * The low-level driver should send the frame out based on + * configuration in the TX control data. Must be implemented and + * atomic. + * + * @start: Called before the first netdevice attached to the hardware + * is enabled. This should turn on the hardware and must turn on + * frame reception (for possibly enabled monitor interfaces.) + * Returns negative error codes, these may be seen in userspace, + * or zero. + * When the device is started it should not have a MAC address + * to avoid acknowledging frames before a non-monitor device + * is added. + * Must be implemented. + * + * @stop: Called after last netdevice attached to the hardware + * is disabled. This should turn off the hardware (at least + * it must turn off frame reception.) + * May be called right after add_interface if that rejects + * an interface. + * Must be implemented. + * + * @add_interface: Called when a netdevice attached to the hardware is + * enabled. Because it is not called for monitor mode devices, @open + * and @stop must be implemented. + * The driver should perform any initialization it needs before + * the device can be enabled. The initial configuration for the + * interface is given in the conf parameter. + * The callback may refuse to add an interface by returning a + * negative error code (which will be seen in userspace.) + * Must be implemented. + * + * @remove_interface: Notifies a driver that an interface is going down. + * The @stop callback is called after this if it is the last interface + * and no monitor interfaces are present. + * When all interfaces are removed, the MAC address in the hardware + * must be cleared so the device no longer acknowledges packets, + * the mac_addr member of the conf structure is, however, set to the + * MAC address of the device going away. + * Hence, this callback must be implemented. + * + * @config: Handler for configuration requests. IEEE 802.11 code calls this + * function to change hardware configuration, e.g., channel. + * + * @config_interface: Handler for configuration requests related to interfaces + * (e.g. BSSID changes.) + * + * @configure_filter: Configure the device's RX filter. + * See the section "Frame filtering" for more information. + * This callback must be implemented and atomic. + * + * @set_tim: Set TIM bit. If the hardware/firmware takes care of beacon + * generation (that is, %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is set) + * mac80211 calls this function when a TIM bit must be set or cleared + * for a given AID. Must be atomic. + * + * @set_key: See the section "Hardware crypto acceleration" + * This callback can sleep, and is only called between add_interface + * and remove_interface calls, i.e. while the interface with the + * given local_address is enabled. + * + * @set_ieee8021x: Enable/disable IEEE 802.1X. This item requests wlan card + * to pass unencrypted EAPOL-Key frames even when encryption is + * configured. If the wlan card does not require such a configuration, + * this function pointer can be set to NULL. + * + * @set_port_auth: Set port authorization state (IEEE 802.1X PAE) to be + * authorized (@authorized=1) or unauthorized (=0). This function can be + * used if the wlan hardware or low-level driver implements PAE. + * mac80211 will filter frames based on authorization state in any case, + * so this function pointer can be NULL if low-level driver does not + * require event notification about port state changes. + * + * @hw_scan: Ask the hardware to service the scan request, no need to start + * the scan state machine in stack. + * + * @get_stats: return low-level statistics + * + * @set_privacy_invoked: For devices that generate their own beacons and probe + * response or association responses this updates the state of privacy_invoked + * returns 0 for success or an error number. + * + * @get_sequence_counter: For devices that have internal sequence counters this + * callback allows mac80211 to access the current value of a counter. + * This callback seems not well-defined, tell us if you need it. + * + * @set_rts_threshold: Configuration of RTS threshold (if device needs it) + * + * @set_frag_threshold: Configuration of fragmentation threshold. Assign this if + * the device does fragmentation by itself; if this method is assigned then + * the stack will not do fragmentation. + * + * @set_retry_limit: Configuration of retry limits (if device needs it) + * + * @sta_notify: Notifies low level driver about addition or removal + * of assocaited station or AP. + * + * @erp_ie_changed: Handle ERP IE change notifications. Must be atomic. + * + * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), + * bursting) for a hardware TX queue. The @queue parameter uses the + * %IEEE80211_TX_QUEUE_* constants. Must be atomic. + * + * @get_tx_stats: Get statistics of the current TX queue status. This is used + * to get number of currently queued packets (queue length), maximum queue + * size (limit), and total number of packets sent using each TX queue + * (count). This information is used for WMM to find out which TX + * queues have room for more packets and by hostapd to provide + * statistics about the current queueing state to external programs. + * + * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently, + * this is only used for IBSS mode debugging and, as such, is not a + * required function. Must be atomic. + * + * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize + * with other STAs in the IBSS. This is only used in IBSS mode. This + * function is optional if the firmware/hardware takes full care of + * TSF synchronization. + * + * @beacon_update: Setup beacon data for IBSS beacons. Unlike access point, + * IBSS uses a fixed beacon frame which is configured using this + * function. + * If the driver returns success (0) from this callback, it owns + * the skb. That means the driver is responsible to kfree_skb() it. + * The control structure is not dynamically allocated. That means the + * driver does not own the pointer and if it needs it somewhere + * outside of the context of this function, it must copy it + * somewhere else. + * This handler is required only for IBSS mode. + * + * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us. + * This is needed only for IBSS mode and the result of this function is + * used to determine whether to reply to Probe Requests. + */ +struct ieee80211_ops { + int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *control); + int (*start)(struct ieee80211_hw *hw); + void (*stop)(struct ieee80211_hw *hw); + int (*add_interface)(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf); + void (*remove_interface)(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf); + int (*config)(struct ieee80211_hw *hw, struct ieee80211_conf *conf); + int (*config_interface)(struct ieee80211_hw *hw, + int if_id, struct ieee80211_if_conf *conf); + void (*configure_filter)(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_addr_list *mc_list); + int (*set_tim)(struct ieee80211_hw *hw, int aid, int set); + int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_address, const u8 *address, + struct ieee80211_key_conf *key); + int (*set_ieee8021x)(struct ieee80211_hw *hw, int use_ieee8021x); + int (*set_port_auth)(struct ieee80211_hw *hw, u8 *addr, + int authorized); + int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len); + int (*get_stats)(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats); + int (*set_privacy_invoked)(struct ieee80211_hw *hw, + int privacy_invoked); + int (*get_sequence_counter)(struct ieee80211_hw *hw, + u8* addr, u8 keyidx, u8 txrx, + u32* iv32, u16* iv16); + int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value); + int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value); + int (*set_retry_limit)(struct ieee80211_hw *hw, + u32 short_retry, u32 long_retr); + void (*sta_notify)(struct ieee80211_hw *hw, int if_id, + enum sta_notify_cmd, const u8 *addr); + void (*erp_ie_changed)(struct ieee80211_hw *hw, u8 changes, + int cts_protection, int preamble); + int (*conf_tx)(struct ieee80211_hw *hw, int queue, + const struct ieee80211_tx_queue_params *params); + int (*get_tx_stats)(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats); + u64 (*get_tsf)(struct ieee80211_hw *hw); + void (*reset_tsf)(struct ieee80211_hw *hw); + int (*beacon_update)(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_control *control); + int (*tx_last_beacon)(struct ieee80211_hw *hw); +}; + +/** + * ieee80211_alloc_hw - Allocate a new hardware device + * + * This must be called once for each hardware device. The returned pointer + * must be used to refer to this device when calling other functions. + * mac80211 allocates a private data area for the driver pointed to by + * @priv in &struct ieee80211_hw, the size of this area is given as + * @priv_data_len. + * + * @priv_data_len: length of private data + * @ops: callbacks for this device + */ +struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, + const struct ieee80211_ops *ops); + +/** + * ieee80211_register_hw - Register hardware device + * + * You must call this function before any other functions + * except ieee80211_register_hwmode. + * + * @hw: the device to register as returned by ieee80211_alloc_hw() + */ +int ieee80211_register_hw(struct ieee80211_hw *hw); + +#ifdef CONFIG_MAC80211_LEDS +extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw); +extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw); +extern char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw); +#endif +/** + * ieee80211_get_tx_led_name - get name of TX LED + * + * mac80211 creates a transmit LED trigger for each wireless hardware + * that can be used to drive LEDs if your driver registers a LED device. + * This function returns the name (or %NULL if not configured for LEDs) + * of the trigger so you can automatically link the LED device. + * + * @hw: the hardware to get the LED trigger name for + */ +static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_LEDS + return __ieee80211_get_tx_led_name(hw); +#else + return NULL; +#endif +} + +/** + * ieee80211_get_rx_led_name - get name of RX LED + * + * mac80211 creates a receive LED trigger for each wireless hardware + * that can be used to drive LEDs if your driver registers a LED device. + * This function returns the name (or %NULL if not configured for LEDs) + * of the trigger so you can automatically link the LED device. + * + * @hw: the hardware to get the LED trigger name for + */ +static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_LEDS + return __ieee80211_get_rx_led_name(hw); +#else + return NULL; +#endif +} + +static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_LEDS + return __ieee80211_get_assoc_led_name(hw); +#else + return NULL; +#endif +} + + +/* Register a new hardware PHYMODE capability to the stack. */ +int ieee80211_register_hwmode(struct ieee80211_hw *hw, + struct ieee80211_hw_mode *mode); + +/** + * ieee80211_unregister_hw - Unregister a hardware device + * + * This function instructs mac80211 to free allocated resources + * and unregister netdevices from the networking subsystem. + * + * @hw: the hardware to unregister + */ +void ieee80211_unregister_hw(struct ieee80211_hw *hw); + +/** + * ieee80211_free_hw - free hardware descriptor + * + * This function frees everything that was allocated, including the + * private data for the driver. You must call ieee80211_unregister_hw() + * before calling this function + * + * @hw: the hardware to free + */ +void ieee80211_free_hw(struct ieee80211_hw *hw); + +/* trick to avoid symbol clashes with the ieee80211 subsystem */ +void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_rx_status *status); + +/** + * ieee80211_rx - receive frame + * + * Use this function to hand received frames to mac80211. The receive + * buffer in @skb must start with an IEEE 802.11 header or a radiotap + * header if %RX_FLAG_RADIOTAP is set in the @status flags. + * + * This function may not be called in IRQ context. + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac80211 after this call + * @status: status of this frame; the status pointer need not be valid + * after this function returns + */ +static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_rx_status *status) +{ + __ieee80211_rx(hw, skb, status); +} + +/** + * ieee80211_rx_irqsafe - receive frame + * + * Like ieee80211_rx() but can be called in IRQ context + * (internally defers to a workqueue.) + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac80211 after this call + * @status: status of this frame; the status pointer need not be valid + * after this function returns and is not freed by mac80211, + * it is recommended that it points to a stack area + */ +void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_rx_status *status); + +/** + * ieee80211_tx_status - transmit status callback + * + * Call this function for all transmitted frames after they have been + * transmitted. It is permissible to not call this function for + * multicast frames but this can affect statistics. + * + * @hw: the hardware the frame was transmitted by + * @skb: the frame that was transmitted, owned by mac80211 after this call + * @status: status information for this frame; the status pointer need not + * be valid after this function returns and is not freed by mac80211, + * it is recommended that it points to a stack area + */ +void ieee80211_tx_status(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_status *status); +void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_status *status); + +/** + * ieee80211_beacon_get - beacon generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @control: will be filled with information needed to send this beacon. + * + * If the beacon frames are generated by the host system (i.e., not in + * hardware/firmware), the low-level driver uses this function to receive + * the next beacon frame from the 802.11 code. The low-level is responsible + * for calling this function before beacon data is needed (e.g., based on + * hardware interrupt). Returned skb is used only once and low-level driver + * is responsible of freeing it. + */ +struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, + int if_id, + struct ieee80211_tx_control *control); + +/** + * ieee80211_rts_get - RTS frame generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @frame: pointer to the frame that is going to be protected by the RTS. + * @frame_len: the frame length (in octets). + * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @rts: The buffer where to store the RTS frame. + * + * If the RTS frames are generated by the host system (i.e., not in + * hardware/firmware), the low-level driver uses this function to receive + * the next RTS frame from the 802.11 code. The low-level is responsible + * for calling this function before and RTS frame is needed. + */ +void ieee80211_rts_get(struct ieee80211_hw *hw, int if_id, + const void *frame, size_t frame_len, + const struct ieee80211_tx_control *frame_txctl, + struct ieee80211_rts *rts); + +/** + * ieee80211_rts_duration - Get the duration field for an RTS frame + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @frame_len: the length of the frame that is going to be protected by the RTS. + * @frame_txctl: &struct ieee80211_tx_control of the frame. + * + * If the RTS is generated in firmware, but the host system must provide + * the duration field, the low-level driver uses this function to receive + * the duration field value in little-endian byteorder. + */ +__le16 ieee80211_rts_duration(struct ieee80211_hw *hw, int if_id, + size_t frame_len, + const struct ieee80211_tx_control *frame_txctl); + +/** + * ieee80211_ctstoself_get - CTS-to-self frame generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @frame: pointer to the frame that is going to be protected by the CTS-to-self. + * @frame_len: the frame length (in octets). + * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @cts: The buffer where to store the CTS-to-self frame. + * + * If the CTS-to-self frames are generated by the host system (i.e., not in + * hardware/firmware), the low-level driver uses this function to receive + * the next CTS-to-self frame from the 802.11 code. The low-level is responsible + * for calling this function before and CTS-to-self frame is needed. + */ +void ieee80211_ctstoself_get(struct ieee80211_hw *hw, int if_id, + const void *frame, size_t frame_len, + const struct ieee80211_tx_control *frame_txctl, + struct ieee80211_cts *cts); + +/** + * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @frame_len: the length of the frame that is going to be protected by the CTS-to-self. + * @frame_txctl: &struct ieee80211_tx_control of the frame. + * + * If the CTS-to-self is generated in firmware, but the host system must provide + * the duration field, the low-level driver uses this function to receive + * the duration field value in little-endian byteorder. + */ +__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, int if_id, + size_t frame_len, + const struct ieee80211_tx_control *frame_txctl); + +/** + * ieee80211_generic_frame_duration - Calculate the duration field for a frame + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @frame_len: the length of the frame. + * @rate: the rate (in 100kbps) at which the frame is going to be transmitted. + * + * Calculate the duration field of some generic frame, given its + * length and transmission rate (in 100kbps). + */ +__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, int if_id, + size_t frame_len, + int rate); + +/** + * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @control: will be filled with information needed to send returned frame. + * + * Function for accessing buffered broadcast and multicast frames. If + * hardware/firmware does not implement buffering of broadcast/multicast + * frames when power saving is used, 802.11 code buffers them in the host + * memory. The low-level driver uses this function to fetch next buffered + * frame. In most cases, this is used when generating beacon frame. This + * function returns a pointer to the next buffered skb or NULL if no more + * buffered frames are available. + * + * Note: buffered frames are returned only after DTIM beacon frame was + * generated with ieee80211_beacon_get() and the low-level driver must thus + * call ieee80211_beacon_get() first. ieee80211_get_buffered_bc() returns + * NULL if the previous generated beacon was not DTIM, so the low-level driver + * does not need to check for DTIM beacons separately and should be able to + * use common code for all beacons. + */ +struct sk_buff * +ieee80211_get_buffered_bc(struct ieee80211_hw *hw, int if_id, + struct ieee80211_tx_control *control); + +/** + * ieee80211_get_hdrlen_from_skb - get header length from data + * + * Given an skb with a raw 802.11 header at the data pointer this function + * returns the 802.11 header length in bytes (not including encryption + * headers). If the data in the sk_buff is too short to contain a valid 802.11 + * header the function returns 0. + * + * @skb: the frame + */ +int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); + +/** + * ieee80211_get_hdrlen - get header length from frame control + * + * This function returns the 802.11 header length in bytes (not including + * encryption headers.) + * + * @fc: the frame control field (in CPU endianness) + */ +int ieee80211_get_hdrlen(u16 fc); + +/** + * ieee80211_wake_queue - wake specific queue + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @queue: queue number (counted from zero). + * + * Drivers should use this function instead of netif_wake_queue. + */ +void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue); + +/** + * ieee80211_stop_queue - stop specific queue + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @queue: queue number (counted from zero). + * + * Drivers should use this function instead of netif_stop_queue. + */ +void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue); + +/** + * ieee80211_start_queues - start all queues + * @hw: pointer to as obtained from ieee80211_alloc_hw(). + * + * Drivers should use this function instead of netif_start_queue. + */ +void ieee80211_start_queues(struct ieee80211_hw *hw); + +/** + * ieee80211_stop_queues - stop all queues + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * + * Drivers should use this function instead of netif_stop_queue. + */ +void ieee80211_stop_queues(struct ieee80211_hw *hw); + +/** + * ieee80211_wake_queues - wake all queues + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * + * Drivers should use this function instead of netif_wake_queue. + */ +void ieee80211_wake_queues(struct ieee80211_hw *hw); + +/** + * ieee80211_scan_completed - completed hardware scan + * + * When hardware scan offload is used (i.e. the hw_scan() callback is + * assigned) this function needs to be called by the driver to notify + * mac80211 that the scan finished. + * + * @hw: the hardware that finished the scan + */ +void ieee80211_scan_completed(struct ieee80211_hw *hw); + +#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" +#define MAC_ARG(x) ((u8*)(x))[0], ((u8*)(x))[1], ((u8*)(x))[2], \ + ((u8*)(x))[3], ((u8*)(x))[4], ((u8*)(x))[5] + +#endif /* MAC80211_H */ |