diff options
Diffstat (limited to 'package/mac80211/patches/000-kconfig.patch')
| -rw-r--r-- | package/mac80211/patches/000-kconfig.patch | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/package/mac80211/patches/000-kconfig.patch b/package/mac80211/patches/000-kconfig.patch new file mode 100644 index 0000000000..bcbf8868b5 --- /dev/null +++ b/package/mac80211/patches/000-kconfig.patch @@ -0,0 +1,201 @@ +--- /dev/null ++++ b/net/mac80211/Kconfig +@@ -0,0 +1,198 @@ ++config MAC80211 ++ tristate "Generic IEEE 802.11 Networking Stack (mac80211)" ++ select CRYPTO ++ select CRYPTO_ECB ++ select CRYPTO_ARC4 ++ select CRYPTO_AES ++ select CRC32 ++ select WIRELESS_EXT ++ select CFG80211 ++ ---help--- ++ This option enables the hardware independent IEEE 802.11 ++ networking stack. ++ ++menu "Rate control algorithm selection" ++ depends on MAC80211 != n ++ ++config MAC80211_RC_PID ++ bool "PID controller based rate control algorithm" if EMBEDDED ++ default y ++ ---help--- ++ This option enables a TX rate control algorithm for ++ mac80211 that uses a PID controller to select the TX ++ rate. ++ ++choice ++ prompt "Default rate control algorithm" ++ default MAC80211_RC_DEFAULT_PID ++ ---help--- ++ This option selects the default rate control algorithm ++ mac80211 will use. Note that this default can still be ++ overriden through the ieee80211_default_rc_algo module ++ parameter if different algorithms are available. ++ ++config MAC80211_RC_DEFAULT_PID ++ bool "PID controller based rate control algorithm" ++ depends on MAC80211_RC_PID ++ ---help--- ++ Select the PID controller based rate control as the ++ default rate control algorithm. You should choose ++ this unless you know what you are doing. ++ ++endchoice ++ ++config MAC80211_RC_DEFAULT ++ string ++ default "pid" if MAC80211_RC_DEFAULT_PID ++ default "" ++ ++endmenu ++ ++config MAC80211_MESH ++ bool "Enable mac80211 mesh networking (pre-802.11s) support" ++ depends on MAC80211 && EXPERIMENTAL ++ ---help--- ++ This options enables support of Draft 802.11s mesh networking. ++ The implementation is based on Draft 1.08 of the Mesh Networking ++ amendment. For more information visit http://o11s.org/. ++ ++ ++config MAC80211_LEDS ++ bool "Enable LED triggers" ++ depends on MAC80211 ++ select NEW_LEDS ++ select LEDS_TRIGGERS ++ ---help--- ++ This option enables a few LED triggers for different ++ packet receive/transmit events. ++ ++config MAC80211_DEBUGFS ++ bool "Export mac80211 internals in DebugFS" ++ depends on MAC80211 && DEBUG_FS ++ ---help--- ++ Select this to see extensive information about ++ the internal state of mac80211 in debugfs. ++ ++ Say N unless you know you need this. ++ ++menuconfig MAC80211_DEBUG_MENU ++ bool "Select mac80211 debugging features" ++ depends on MAC80211 ++ ---help--- ++ This option collects various mac80211 debug settings. ++ ++config MAC80211_DEBUG_PACKET_ALIGNMENT ++ bool "Enable packet alignment debugging" ++ depends on MAC80211_DEBUG_MENU ++ ---help--- ++ This option is recommended for driver authors and strongly ++ discouraged for everybody else, it will trigger a warning ++ when a driver hands mac80211 a buffer that is aligned in ++ a way that will cause problems with the IP stack on some ++ architectures. ++ ++ Say N unless you're writing a mac80211 based driver. ++ ++config MAC80211_NOINLINE ++ bool "Do not inline TX/RX handlers" ++ depends on MAC80211_DEBUG_MENU ++ ---help--- ++ This option affects code generation in mac80211, when ++ selected some functions are marked "noinline" to allow ++ easier debugging of problems in the transmit and receive ++ paths. ++ ++ This option increases code size a bit and inserts a lot ++ of function calls in the code, but is otherwise safe to ++ enable. ++ ++ If unsure, say N unless you expect to be finding problems ++ in mac80211. ++ ++config MAC80211_VERBOSE_DEBUG ++ bool "Verbose debugging output" ++ depends on MAC80211_DEBUG_MENU ++ ---help--- ++ Selecting this option causes mac80211 to print out ++ many debugging messages. It should not be selected ++ on production systems as some of the messages are ++ remotely triggerable. ++ ++ Do not select this option. ++ ++config MAC80211_HT_DEBUG ++ bool "Verbose HT debugging" ++ depends on MAC80211_DEBUG_MENU ++ ---help--- ++ This option enables 802.11n High Throughput features ++ debug tracing output. ++ ++ It should not be selected on production systems as some ++ of the messages are remotely triggerable. ++ ++ Do not select this option. ++ ++config MAC80211_TKIP_DEBUG ++ bool "Verbose TKIP debugging" ++ depends on MAC80211_DEBUG_MENU ++ ---help--- ++ Selecting this option causes mac80211 to print out ++ very verbose TKIP debugging messages. It should not ++ be selected on production systems as those messages ++ are remotely triggerable. ++ ++ Do not select this option. ++ ++config MAC80211_IBSS_DEBUG ++ bool "Verbose IBSS debugging" ++ depends on MAC80211_DEBUG_MENU ++ ---help--- ++ Selecting this option causes mac80211 to print out ++ very verbose IBSS debugging messages. It should not ++ be selected on production systems as those messages ++ are remotely triggerable. ++ ++ Do not select this option. ++ ++config MAC80211_VERBOSE_PS_DEBUG ++ bool "Verbose powersave mode debugging" ++ depends on MAC80211_DEBUG_MENU ++ ---help--- ++ Selecting this option causes mac80211 to print out very ++ verbose power save mode debugging messages (when mac80211 ++ is an AP and has power saving stations.) ++ It should not be selected on production systems as those ++ messages are remotely triggerable. ++ ++ Do not select this option. ++ ++config MAC80211_VERBOSE_MPL_DEBUG ++ bool "Verbose mesh peer link debugging" ++ depends on MAC80211_DEBUG_MENU ++ depends on MAC80211_MESH ++ ---help--- ++ Selecting this option causes mac80211 to print out very ++ verbose mesh peer link debugging messages (when mac80211 ++ is taking part in a mesh network). ++ It should not be selected on production systems as those ++ messages are remotely triggerable. ++ ++ Do not select this option. ++ ++config MAC80211_DEBUG_COUNTERS ++ bool "Extra statistics for TX/RX debugging" ++ depends on MAC80211_DEBUG_MENU ++ depends on MAC80211_DEBUGFS ++ ---help--- ++ Selecting this option causes mac80211 to keep additional ++ and very verbose statistics about TX and RX handler use ++ and show them in debugfs. ++ ++ If unsure, say N. ++ ++config MAC80211_VERBOSE_SPECT_MGMT_DEBUG ++ bool "Verbose Spectrum Management (IEEE 802.11h)debugging" ++ depends on MAC80211_DEBUG_MENU ++ ---help--- ++ Say Y here to print out verbose Spectrum Management (IEEE 802.11h) ++ debug messages. |