diff options
Diffstat (limited to 'package/linux/kernel-source/include/sbextif.h')
| -rw-r--r-- | package/linux/kernel-source/include/sbextif.h | 242 |
1 files changed, 0 insertions, 242 deletions
diff --git a/package/linux/kernel-source/include/sbextif.h b/package/linux/kernel-source/include/sbextif.h deleted file mode 100644 index 32274b8165..0000000000 --- a/package/linux/kernel-source/include/sbextif.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Hardware-specific External Interface I/O core definitions - * for the BCM47xx family of SiliconBackplane-based chips. - * - * The External Interface core supports a total of three external chip selects - * supporting external interfaces. One of the external chip selects is - * used for Flash, one is used for PCMCIA, and the other may be - * programmed to support either a synchronous interface or an - * asynchronous interface. The asynchronous interface can be used to - * support external devices such as UARTs and the BCM2019 Bluetooth - * baseband processor. - * The external interface core also contains 2 on-chip 16550 UARTs, clock - * frequency control, a watchdog interrupt timer, and a GPIO interface. - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * $Id$ - */ - -#ifndef _SBEXTIF_H -#define _SBEXTIF_H - -/* external interface address space */ -#define EXTIF_PCMCIA_MEMBASE(x) (x) -#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) -#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) -#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000) -#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000) - -/* cpp contortions to concatenate w/arg prescan */ -#ifndef PAD -#define _PADLINE(line) pad ## line -#define _XSTR(line) _PADLINE(line) -#define PAD _XSTR(__LINE__) -#endif /* PAD */ - -/* - * The multiple instances of output and output enable registers - * are present to allow driver software for multiple cores to control - * gpio outputs without needing to share a single register pair. - */ -struct gpiouser { - uint32 out; - uint32 outen; -}; -#define NGPIOUSER 5 - -typedef volatile struct { - uint32 corecontrol; - uint32 extstatus; - uint32 PAD[2]; - - /* pcmcia control registers */ - uint32 pcmcia_config; - uint32 pcmcia_memwait; - uint32 pcmcia_attrwait; - uint32 pcmcia_iowait; - - /* programmable interface control registers */ - uint32 prog_config; - uint32 prog_waitcount; - - /* flash control registers */ - uint32 flash_config; - uint32 flash_waitcount; - uint32 PAD[4]; - - uint32 watchdog; - - /* clock control */ - uint32 clockcontrol_n; - uint32 clockcontrol_sb; - uint32 clockcontrol_pci; - uint32 clockcontrol_mii; - uint32 PAD[3]; - - /* gpio */ - uint32 gpioin; - struct gpiouser gpio[NGPIOUSER]; - uint32 PAD; - uint32 ejtagouten; - uint32 gpiointpolarity; - uint32 gpiointmask; - uint32 PAD[153]; - - uint8 uartdata; - uint8 PAD[3]; - uint8 uartimer; - uint8 PAD[3]; - uint8 uartfcr; - uint8 PAD[3]; - uint8 uartlcr; - uint8 PAD[3]; - uint8 uartmcr; - uint8 PAD[3]; - uint8 uartlsr; - uint8 PAD[3]; - uint8 uartmsr; - uint8 PAD[3]; - uint8 uartscratch; - uint8 PAD[3]; -} extifregs_t; - -/* corecontrol */ -#define CC_UE (1 << 0) /* uart enable */ - -/* extstatus */ -#define ES_EM (1 << 0) /* endian mode (ro) */ -#define ES_EI (1 << 1) /* external interrupt pin (ro) */ -#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */ - -/* gpio bit mask */ -#define GPIO_BIT0 (1 << 0) -#define GPIO_BIT1 (1 << 1) -#define GPIO_BIT2 (1 << 2) -#define GPIO_BIT3 (1 << 3) -#define GPIO_BIT4 (1 << 4) -#define GPIO_BIT5 (1 << 5) -#define GPIO_BIT6 (1 << 6) -#define GPIO_BIT7 (1 << 7) - - -/* pcmcia/prog/flash_config */ -#define CF_EN (1 << 0) /* enable */ -#define CF_EM_MASK 0xe /* mode */ -#define CF_EM_SHIFT 1 -#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */ -#define CF_EM_SYNC 0x2 /* synchronous mode */ -#define CF_EM_PCMCIA 0x4 /* pcmcia mode */ -#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */ -#define CF_BS (1 << 5) /* byteswap */ -#define CF_CD_MASK 0xc0 /* clock divider */ -#define CF_CD_SHIFT 6 -#define CF_CD_DIV2 0x0 /* backplane/2 */ -#define CF_CD_DIV3 0x40 /* backplane/3 */ -#define CF_CD_DIV4 0x80 /* backplane/4 */ -#define CF_CE (1 << 8) /* clock enable */ -#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */ - -/* pcmcia_memwait */ -#define PM_W0_MASK 0x3f /* waitcount0 */ -#define PM_W1_MASK 0x1f00 /* waitcount1 */ -#define PM_W1_SHIFT 8 -#define PM_W2_MASK 0x1f0000 /* waitcount2 */ -#define PM_W2_SHIFT 16 -#define PM_W3_MASK 0x1f000000 /* waitcount3 */ -#define PM_W3_SHIFT 24 - -/* pcmcia_attrwait */ -#define PA_W0_MASK 0x3f /* waitcount0 */ -#define PA_W1_MASK 0x1f00 /* waitcount1 */ -#define PA_W1_SHIFT 8 -#define PA_W2_MASK 0x1f0000 /* waitcount2 */ -#define PA_W2_SHIFT 16 -#define PA_W3_MASK 0x1f000000 /* waitcount3 */ -#define PA_W3_SHIFT 24 - -/* pcmcia_iowait */ -#define PI_W0_MASK 0x3f /* waitcount0 */ -#define PI_W1_MASK 0x1f00 /* waitcount1 */ -#define PI_W1_SHIFT 8 -#define PI_W2_MASK 0x1f0000 /* waitcount2 */ -#define PI_W2_SHIFT 16 -#define PI_W3_MASK 0x1f000000 /* waitcount3 */ -#define PI_W3_SHIFT 24 - -/* prog_waitcount */ -#define PW_W0_MASK 0x0000001f /* waitcount0 */ -#define PW_W1_MASK 0x00001f00 /* waitcount1 */ -#define PW_W1_SHIFT 8 -#define PW_W2_MASK 0x001f0000 /* waitcount2 */ -#define PW_W2_SHIFT 16 -#define PW_W3_MASK 0x1f000000 /* waitcount3 */ -#define PW_W3_SHIFT 24 - -#define PW_W0 0x0000000c -#define PW_W1 0x00000a00 -#define PW_W2 0x00020000 -#define PW_W3 0x01000000 - -/* flash_waitcount */ -#define FW_W0_MASK 0x1f /* waitcount0 */ -#define FW_W1_MASK 0x1f00 /* waitcount1 */ -#define FW_W1_SHIFT 8 -#define FW_W2_MASK 0x1f0000 /* waitcount2 */ -#define FW_W2_SHIFT 16 -#define FW_W3_MASK 0x1f000000 /* waitcount3 */ -#define FW_W3_SHIFT 24 - -/* watchdog */ -#define WATCHDOG_CLOCK 48000000 /* Hz */ - -/* clockcontrol_n */ -#define CN_N1_MASK 0x3f /* n1 control */ -#define CN_N2_MASK 0x3f00 /* n2 control */ -#define CN_N2_SHIFT 8 - -/* clockcontrol_sb/pci/mii */ -#define CC_M1_MASK 0x3f /* m1 control */ -#define CC_M2_MASK 0x3f00 /* m2 control */ -#define CC_M2_SHIFT 8 -#define CC_M3_MASK 0x3f0000 /* m3 control */ -#define CC_M3_SHIFT 16 -#define CC_MC_MASK 0x1f000000 /* mux control */ -#define CC_MC_SHIFT 24 - -/* Clock control default values */ -#define CC_DEF_N 0x0009 /* Default values for bcm4710 */ -#define CC_DEF_100 0x04020011 -#define CC_DEF_33 0x11030011 -#define CC_DEF_25 0x11050011 - -/* Clock control values for 125Mhz */ -#define CC_125_N 0x0802 -#define CC_125_M 0x04020009 -#define CC_125_M25 0x11090009 -#define CC_125_M33 0x11090005 - -/* Clock control magic field values */ -#define CC_F6_2 0x02 /* A factor of 2 in */ -#define CC_F6_3 0x03 /* 6-bit fields like */ -#define CC_F6_4 0x05 /* N1, M1 or M3 */ -#define CC_F6_5 0x09 -#define CC_F6_6 0x11 -#define CC_F6_7 0x21 - -#define CC_F5_BIAS 5 /* 5-bit fields get this added */ - -#define CC_MC_BYPASS 0x08 -#define CC_MC_M1 0x04 -#define CC_MC_M1M2 0x02 -#define CC_MC_M1M2M3 0x01 -#define CC_MC_M1M3 0x11 - -#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */ - -#endif /* _SBEXTIF_H */ |