diff options
Diffstat (limited to 'package/fonera-mp3-drv/src/ar531x.h')
| -rw-r--r-- | package/fonera-mp3-drv/src/ar531x.h | 1124 |
1 files changed, 0 insertions, 1124 deletions
diff --git a/package/fonera-mp3-drv/src/ar531x.h b/package/fonera-mp3-drv/src/ar531x.h deleted file mode 100644 index 9176c15abc..0000000000 --- a/package/fonera-mp3-drv/src/ar531x.h +++ /dev/null @@ -1,1124 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. - */ - -#ifndef AR531X_H -#define AR531X_H 1 - - -#ifndef CONFIG_AR531X_COBRA - -#include <asm/addrspace.h> - -/* Address Map */ -#define AR531X_WLAN0 0x18000000 -#define AR531X_WLAN1 0x18500000 -#define AR531X_ENET0 0x18100000 -#define AR531X_ENET1 0x18200000 -#define AR531X_SDRAMCTL 0x18300000 -#define AR531X_FLASHCTL 0x18400000 -#define AR531X_APBBASE 0x1c000000 -#define AR531X_FLASH 0x1e000000 - -/* - * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that - * should be considered available. The AR5312 supports 2 enet MACS, - * even though many reference boards only actually use 1 of them - * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. - * The AR2312 supports 1 enet MAC. - */ -#define AR531X_NUM_ENET_MAC 2 - -/* - * Need these defines to determine true number of ethernet MACs - */ -#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ -#define AR531X_RADIO_MASK_OFF 0xc8 -#define AR531X_RADIO0_MASK 0x0003 -#define AR531X_RADIO1_MASK 0x000c -#define AR531X_RADIO1_S 2 - -/* - * AR531X_NUM_WMAC defines the number of Wireless MACs that\ - * should be considered available. - */ -#define AR531X_NUM_WMAC 2 - -/* Reset/Timer Block Address Map */ -#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) -#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ -#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ -#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ -#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ -#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ -#define AR531X_RESET (AR531X_RESETTMR + 0x0020) -#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) -#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) -#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) -#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) -#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) -#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) -#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ -#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ - -/* AR531X_WD_CTRL register bit field definitions */ -#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 -#define AR531X_WD_CTRL_NMI 0x0001 -#define AR531X_WD_CTRL_RESET 0x0002 - -/* AR531X_ISR register bit field definitions */ -#define AR531X_ISR_NONE 0x0000 -#define AR531X_ISR_TIMER 0x0001 -#define AR531X_ISR_AHBPROC 0x0002 -#define AR531X_ISR_AHBDMA 0x0004 -#define AR531X_ISR_GPIO 0x0008 -#define AR531X_ISR_UART0 0x0010 -#define AR531X_ISR_UART0DMA 0x0020 -#define AR531X_ISR_WD 0x0040 -#define AR531X_ISR_LOCAL 0x0080 - -/* AR531X_RESET register bit field definitions */ -#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ -#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ -#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ -#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ -#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ -#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ -#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ -#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ -#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ -#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ -#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ -#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ -#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ -#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ -#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ -#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ -#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ -#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ - -#define AR531X_RESET_WMAC0_BITS \ - AR531X_RESET_WLAN0 |\ - AR531X_RESET_WARM_WLAN0_MAC |\ - AR531X_RESET_WARM_WLAN0_BB - -#define AR531X_RESERT_WMAC1_BITS \ - AR531X_RESET_WLAN1 |\ - AR531X_RESET_WARM_WLAN1_MAC |\ - AR531X_RESET_WARM_WLAN1_BB - -/* AR5312_CLOCKCTL1 register bit field definitions */ -#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 - -/* Valid for AR5312 and AR2312 */ -#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 - -/* Valid for AR2313 */ -#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 -#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 -#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 -#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 -#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 - - -/* AR531X_ENABLE register bit field definitions */ -#define AR531X_ENABLE_WLAN0 0x0001 -#define AR531X_ENABLE_ENET0 0x0002 -#define AR531X_ENABLE_ENET1 0x0004 -#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ -#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ -#define AR531X_ENABLE_WLAN1 \ - (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) - -/* AR531X_REV register bit field definitions */ -#define AR531X_REV_WMAC_MAJ 0xf000 -#define AR531X_REV_WMAC_MAJ_S 12 -#define AR531X_REV_WMAC_MIN 0x0f00 -#define AR531X_REV_WMAC_MIN_S 8 -#define AR531X_REV_MAJ 0x00f0 -#define AR531X_REV_MAJ_S 4 -#define AR531X_REV_MIN 0x000f -#define AR531X_REV_MIN_S 0 -#define AR531X_REV_CHIP (REV_MAJ|REV_MIN) - -/* Major revision numbers, bits 7..4 of Revision ID register */ -#define AR531X_REV_MAJ_AR5312 0x4 -#define AR531X_REV_MAJ_AR2313 0x5 - -/* Minor revision numbers, bits 3..0 of Revision ID register */ -#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ -#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ - -/* AR531X_FLASHCTL register bit field definitions */ -#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ -#define FLASHCTL_IDCY_S 0 -#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ -#define FLASHCTL_WST1_S 5 -#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ -#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ -#define FLASHCTL_WST2_S 11 -#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ -#define FLASHCTL_AC_S 16 -#define FLASHCTL_AC_128K 0x00000000 -#define FLASHCTL_AC_256K 0x00010000 -#define FLASHCTL_AC_512K 0x00020000 -#define FLASHCTL_AC_1M 0x00030000 -#define FLASHCTL_AC_2M 0x00040000 -#define FLASHCTL_AC_4M 0x00050000 -#define FLASHCTL_AC_8M 0x00060000 -#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ -#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ -#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ -#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ -#define FLASHCTL_WP 0x04000000 /* Write protect */ -#define FLASHCTL_BM 0x08000000 /* Burst mode */ -#define FLASHCTL_MW 0x30000000 /* Memory width */ -#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ -#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ -#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ -#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ -#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ -#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ - -/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ -#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) -#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) -#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) - -/* ARM SDRAM Controller -- just enough to determine memory size */ -#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) -#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ -#define MEM_CFG1_AC0_S 8 -#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ -#define MEM_CFG1_AC1_S 12 - -/* GPIO Address Map */ -#define AR531X_GPIO (AR531X_APBBASE + 0x2000) -#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ -#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ -#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ - -/* GPIO Control Register bit field definitions */ -#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -#define GPIO_CR_O(x) (0 << (x)) /* mask for output */ -#define GPIO_CR_I(x) (1 << (x)) /* mask for input */ -#define GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ -#define GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ - - -typedef unsigned int AR531X_REG; - -#define sysRegRead(phys) \ - (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) - -#define sysRegWrite(phys, val) \ - ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) - - -/* - * This is board-specific data that is stored in a "fixed" location in flash. - * It is shared across operating systems, so it should not be changed lightly. - * The main reason we need it is in order to extract the ethernet MAC - * address(es). - */ -struct ar531x_boarddata { - u32 magic; /* board data is valid */ -#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ - u16 cksum; /* checksum (starting with BD_REV 2) */ - u16 rev; /* revision of this struct */ -#define BD_REV 4 - char boardName[64]; /* Name of board */ - u16 major; /* Board major number */ - u16 minor; /* Board minor number */ - u32 config; /* Board configuration */ -#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ -#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ -#define BD_UART1 0x00000004 /* UART1 is stuffed */ -#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ -#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ -#define BD_SYSLED 0x00000020 /* System LED stuffed */ -#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ -#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ -#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ -#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ -#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ -#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ -#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ -#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ -#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ -#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ -#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ -#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ - u16 resetConfigGpio; /* Reset factory GPIO pin */ - u16 sysLedGpio; /* System LED GPIO pin */ - - u32 cpuFreq; /* CPU core frequency in Hz */ - u32 sysFreq; /* System frequency in Hz */ - u32 cntFreq; /* Calculated C0_COUNT frequency */ - - u8 wlan0Mac[6]; - u8 enet0Mac[6]; - u8 enet1Mac[6]; - - u16 pciId; /* Pseudo PCIID for common code */ - u16 memCap; /* cap bank1 in MB */ - - /* version 3 */ - u8 wlan1Mac[6]; /* (ar5212) */ -}; - -#else - -/* - * Add support for Cobra - * - * AR531XPLUSreg.h Register definitions for Atheros AR5311 and AR5312 chipsets. - * - WLAN registers are listed in - * hal/ar5211/ar5211Reg.h - * hal/ar5212/ar5212Reg.h - * - Ethernet registers are listed in ar531xenet.h - * - Standard UART is 16550 compatible. - */ - - -/* - * Address map - */ -#define AR531XPLUS_SDRAM0 0x00000000 /* DRAM */ -#define AR531XPLUS_SPI_READ 0x08000000 /* SPI FLASH */ -#define AR531XPLUS_WLAN0 0xB0000000 /* Wireless MMR */ -#define AR531XPLUS_PCI 0xB0100000 /* PCI MMR */ -#define AR531XPLUS_SDRAMCTL 0xB0300000 /* SDRAM MMR */ -#define AR531XPLUS_LOCAL 0xB0400000 /* LOCAL BUS MMR */ -#define AR531XPLUS_ENET0 0xB0500000 /* ETHERNET MMR */ -#define AR531XPLUS_DSLBASE 0xB1000000 /* RESET CONTROL MMR */ -#define AR531XPLUS_UART0 0xB1100003 /* UART MMR */ -#define AR531XPLUS_SPI 0xB1300000 /* SPI FLASH MMR */ -#define AR531XPLUS_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */ -#define AR531XPLUS_RAM1 0x40000000 /* ram alias */ -#define AR531XPLUS_PCIEXT 0x80000000 /* pci external */ -#define AR531XPLUS_RAM2 0xc0000000 /* ram alias */ -#define AR531XPLUS_RAM3 0xe0000000 /* ram alias */ - -#define AR531X_ENET0 AR531XPLUS_ENET0 -#define AR531X_ENET1 0 -/* - * Reset Register - */ -#define AR531XPLUS_COLD_RESET (AR531XPLUS_DSLBASE + 0x0000) - -/* Cold Reset */ -#define RESET_COLD_AHB 0x00000001 -#define RESET_COLD_APB 0x00000002 -#define RESET_COLD_CPU 0x00000004 -#define RESET_COLD_CPUWARM 0x00000008 -#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ - -/* Warm Reset */ - -#define AR531XPLUS_RESET (AR531XPLUS_DSLBASE + 0x0004) -#define AR531X_RESET AR531XPLUS_RESET - -#define RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ -#define RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ -#define RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ -#define RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ -#define RESET_MEMCTL 0x00000010 /* warm reset memory controller */ -#define RESET_LOCAL 0x00000020 /* warm reset local bus */ -#define RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ -#define RESET_SPI 0x00000080 /* warm reset SPI interface */ -#define RESET_UART0 0x00000100 /* warm reset UART0 */ -#define RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ -#define RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ -#define RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ - -#define AR531X_RESET_ENET0 RESET_ENET0 -#define AR531X_RESET_EPHY0 RESET_EPHY0 -#define AR531X_RESET_ENET1 0 -#define AR531X_RESET_EPHY1 0 - -/* - * AHB master arbitration control - */ -#define AR531XPLUS_AHB_ARB_CTL (AR531XPLUS_DSLBASE + 0x0008) - -#define ARB_CPU 0x00000001 /* CPU, default */ -#define ARB_WLAN 0x00000002 /* WLAN */ -#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ -#define ARB_LOCAL 0x00000008 /* LOCAL */ -#define ARB_PCI 0x00000010 /* PCI */ -#define ARB_ETHERNET 0x00000020 /* Ethernet */ -#define ARB_RETRY 0x00000100 /* retry policy, debug only */ - -/* - * Config Register - */ -#define AR531XPLUS_ENDIAN_CTL (AR531XPLUS_DSLBASE + 0x000c) - -#define CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ -#define CONFIG_WLAN 0x00000002 /* WLAN byteswap */ -#define CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ -#define CONFIG_PCI 0x00000008 /* PCI byteswap */ -#define CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ -#define CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ -#define CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ - -#define CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ -#define CONFIG_CPU 0x00000400 /* CPU big endian */ -#define CONFIG_PCIAHB 0x00000800 -#define CONFIG_PCIAHB_BRIDGE 0x00001000 -#define CONFIG_SPI 0x00008000 /* SPI byteswap */ -#define CONFIG_CPU_DRAM 0x00010000 -#define CONFIG_CPU_PCI 0x00020000 -#define CONFIG_CPU_MMR 0x00040000 -#define CONFIG_BIG 0x00000400 - - -/* - * NMI control - */ -#define AR531XPLUS_NMI_CTL (AR531XPLUS_DSLBASE + 0x0010) - -#define NMI_EN 1 - -/* - * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). - */ -#define AR531XPLUS_SREV (AR531XPLUS_DSLBASE + 0x0014) - -#define AR531X_REV AR531XPLUS_SREV - -#define REV_MAJ 0x00f0 -#define REV_MAJ_S 4 -#define REV_MIN 0x000f -#define REV_MIN_S 0 -#define REV_CHIP (REV_MAJ|REV_MIN) - -#define AR531X_REV_MAJ REV_MAJ -#define AR531X_REV_MAJ_S REV_MAJ_S -#define AR531X_REV_MIN REV_MIN -#define AR531X_REV_MIN_S REV_MIN_S -#define REV_CHIP (REV_MAJ|REV_MIN) -/* - * Need these defines to determine true number of ethernet MACs - */ -#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ -#define AR531X_RADIO_MASK_OFF 0xc8 -#define AR531X_RADIO0_MASK 0x0003 -#define AR531X_RADIO1_MASK 0x000c -#define AR531X_RADIO1_S 2 - -/* Major revision numbers, bits 7..4 of Revision ID register */ -#define AR531X_REV_MAJ_AR5312 0x4 -#define AR531X_REV_MAJ_AR2313 0x5 - -/* - * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that - * should be considered available. The AR5312 supports 2 enet MACS, - * even though many reference boards only actually use 1 of them - * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. - * The AR2312 supports 1 enet MAC. - */ -#define AR531X_NUM_ENET_MAC 1 - -/* - * Interface Enable - */ -#define AR531XPLUS_IF_CTL (AR531XPLUS_DSLBASE + 0x0018) - -#define IF_MASK 0x00000007 -#define IF_DISABLED 0 -#define IF_PCI 1 -#define IF_TS_LOCAL 2 -#define IF_ALL 3 /* only for emulation with separate pins */ -#define IF_LOCAL_HOST 0x00000008 -#define IF_PCI_HOST 0x00000010 -#define IF_PCI_INTR 0x00000020 -#define IF_PCI_CLK_MASK 0x00030000 -#define IF_PCI_CLK_INPUT 0 -#define IF_PCI_CLK_OUTPUT_LOW 1 -#define IF_PCI_CLK_OUTPUT_CLK 2 -#define IF_PCI_CLK_OUTPUT_HIGH 3 -#define IF_PCI_CLK_SHIFT 16 - - -/* Major revision numbers, bits 7..4 of Revision ID register */ -#define REV_MAJ_AR5311 0x01 -#define REV_MAJ_AR5312 0x04 -#define REV_MAJ_AR5315 0x0B - -/* - * APB Interrupt control - */ - -#define AR531XPLUS_ISR (AR531XPLUS_DSLBASE + 0x0020) -#define AR531XPLUS_IMR (AR531XPLUS_DSLBASE + 0x0024) -#define AR531XPLUS_GISR (AR531XPLUS_DSLBASE + 0x0028) - -#define ISR_UART0 0x0001 /* high speed UART */ -#define ISR_I2C_RSVD 0x0002 /* I2C bus */ -#define ISR_SPI 0x0004 /* SPI bus */ -#define ISR_AHB 0x0008 /* AHB error */ -#define ISR_APB 0x0010 /* APB error */ -#define ISR_TIMER 0x0020 /* timer */ -#define ISR_GPIO 0x0040 /* GPIO */ -#define ISR_WD 0x0080 /* watchdog */ -#define ISR_IR_RSVD 0x0100 /* IR */ - -#define IMR_UART0 ISR_UART0 -#define IMR_I2C_RSVD ISR_I2C_RSVD -#define IMR_SPI ISR_SPI -#define IMR_AHB ISR_AHB -#define IMR_APB ISR_APB -#define IMR_TIMER ISR_TIMER -#define IMR_GPIO ISR_GPIO -#define IMR_WD ISR_WD -#define IMR_IR_RSVD ISR_IR_RSVD - -#define GISR_MISC 0x0001 -#define GISR_WLAN0 0x0002 -#define GISR_MPEGTS_RSVD 0x0004 -#define GISR_LOCALPCI 0x0008 -#define GISR_WMACPOLL 0x0010 -#define GISR_TIMER 0x0020 -#define GISR_ETHERNET 0x0040 - -/* - * Interrupt routing from IO to the processor IP bits - * Define our inter mask and level - */ -#define AR531XPLUS_INTR_MISCIO SR_IBIT3 -#define AR531XPLUS_INTR_WLAN0 SR_IBIT4 -#define AR531XPLUS_INTR_ENET0 SR_IBIT5 -#define AR531XPLUS_INTR_LOCALPCI SR_IBIT6 -#define AR531XPLUS_INTR_WMACPOLL SR_IBIT7 -#define AR531XPLUS_INTR_COMPARE SR_IBIT8 - -/* - * Timers - */ -#define AR531XPLUS_TIMER (AR531XPLUS_DSLBASE + 0x0030) -#define AR531XPLUS_RELOAD (AR531XPLUS_DSLBASE + 0x0034) -#define AR531XPLUS_WD (AR531XPLUS_DSLBASE + 0x0038) -#define AR531XPLUS_WDC (AR531XPLUS_DSLBASE + 0x003c) - -#define WDC_RESET 0x00000002 /* reset on watchdog */ -#define WDC_NMI 0x00000001 /* NMI on watchdog */ -#define WDC_IGNORE_EXPIRATION 0x00000000 - -/* - * Interface Debug - */ -#define AR531X_FLASHDBG (AR531X_RESETTMR + 0x0040) -#define AR531X_MIIDBG (AR531X_RESETTMR + 0x0044) - - -/* - * CPU Performance Counters - */ -#define AR531XPLUS_PERFCNT0 (AR531XPLUS_DSLBASE + 0x0048) -#define AR531XPLUS_PERFCNT1 (AR531XPLUS_DSLBASE + 0x004c) - -#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */ -#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */ -#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */ -#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */ -#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */ -#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ -#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ - -#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */ -#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */ -#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ -#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ -#define PERF_VRADDR 0x0010 /* Count valid read address cycles */ -#define PERF_VWADDR 0x0020 /* Count valid write address cycles */ -#define PERF_VWDATA 0x0040 /* Count valid write data cycles */ - -/* - * AHB Error Reporting. - */ -#define AR531XPLUS_AHB_ERR0 (AR531XPLUS_DSLBASE + 0x0050) /* error */ -#define AR531XPLUS_AHB_ERR1 (AR531XPLUS_DSLBASE + 0x0054) /* haddr */ -#define AR531XPLUS_AHB_ERR2 (AR531XPLUS_DSLBASE + 0x0058) /* hwdata */ -#define AR531XPLUS_AHB_ERR3 (AR531XPLUS_DSLBASE + 0x005c) /* hrdata */ -#define AR531XPLUS_AHB_ERR4 (AR531XPLUS_DSLBASE + 0x0060) /* status */ - -#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ - /* write 1 to clear all bits in ERR0 */ -#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ -#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ - -#define PROCERR_HMAST 0x0000000f -#define PROCERR_HMAST_DFLT 0 -#define PROCERR_HMAST_WMAC 1 -#define PROCERR_HMAST_ENET 2 -#define PROCERR_HMAST_PCIENDPT 3 -#define PROCERR_HMAST_LOCAL 4 -#define PROCERR_HMAST_CPU 5 -#define PROCERR_HMAST_PCITGT 6 - -#define PROCERR_HMAST_S 0 -#define PROCERR_HWRITE 0x00000010 -#define PROCERR_HSIZE 0x00000060 -#define PROCERR_HSIZE_S 5 -#define PROCERR_HTRANS 0x00000180 -#define PROCERR_HTRANS_S 7 -#define PROCERR_HBURST 0x00000e00 -#define PROCERR_HBURST_S 9 - - - -/* - * Clock Control - */ -#define AR531XPLUS_PLLC_CTL (AR531XPLUS_DSLBASE + 0x0064) -#define AR531XPLUS_PLLV_CTL (AR531XPLUS_DSLBASE + 0x0068) -#define AR531XPLUS_CPUCLK (AR531XPLUS_DSLBASE + 0x006c) -#define AR531XPLUS_AMBACLK (AR531XPLUS_DSLBASE + 0x0070) -#define AR531XPLUS_SYNCCLK (AR531XPLUS_DSLBASE + 0x0074) -#define AR531XPLUS_DSL_SLEEP_CTL (AR531XPLUS_DSLBASE + 0x0080) -#define AR531XPLUS_DSL_SLEEP_DUR (AR531XPLUS_DSLBASE + 0x0084) - -/* PLLc Control fields */ -#define PLLC_REF_DIV_M 0x00000003 -#define PLLC_REF_DIV_S 0 -#define PLLC_FDBACK_DIV_M 0x0000007C -#define PLLC_FDBACK_DIV_S 2 -#define PLLC_ADD_FDBACK_DIV_M 0x00000080 -#define PLLC_ADD_FDBACK_DIV_S 7 -#define PLLC_CLKC_DIV_M 0x0001c000 -#define PLLC_CLKC_DIV_S 14 -#define PLLC_CLKM_DIV_M 0x00700000 -#define PLLC_CLKM_DIV_S 20 - -/* CPU CLK Control fields */ -#define CPUCLK_CLK_SEL_M 0x00000003 -#define CPUCLK_CLK_SEL_S 0 -#define CPUCLK_CLK_DIV_M 0x0000000c -#define CPUCLK_CLK_DIV_S 2 - -/* AMBA CLK Control fields */ -#define AMBACLK_CLK_SEL_M 0x00000003 -#define AMBACLK_CLK_SEL_S 0 -#define AMBACLK_CLK_DIV_M 0x0000000c -#define AMBACLK_CLK_DIV_S 2 - -#if defined(COBRA_EMUL) -#define AR531XPLUS_AMBA_CLOCK_RATE 20000000 -#define AR531XPLUS_CPU_CLOCK_RATE 40000000 -#else -#if defined(DEFAULT_PLL) -#define AR531XPLUS_AMBA_CLOCK_RATE 40000000 -#define AR531XPLUS_CPU_CLOCK_RATE 40000000 -#else -#define AR531XPLUS_AMBA_CLOCK_RATE 92000000 -#define AR531XPLUS_CPU_CLOCK_RATE 184000000 -#endif /* ! DEFAULT_PLL */ -#endif /* ! COBRA_EMUL */ - -#define AR531XPLUS_UART_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE -#define AR531XPLUS_SDRAM_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE - -/* - * The UART computes baud rate as: - * baud = clock / (16 * divisor) - * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL). - */ -#define DESIRED_BAUD_RATE 38400 - -/* - * The WATCHDOG value is computed as - * 10 seconds * AR531X_WATCHDOG_CLOCK_RATE - */ -#define DESIRED_WATCHDOG_SECONDS 10 -#define AR531X_WATCHDOG_TIME \ - (DESIRED_WATCHDOG_SECONDS * AR531X_WATCHDOG_CLOCK_RATE) - - -#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */ - - - /* - * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode. - */ -#define AR531X_PCICFG (AR531X_RESETTMR + 0x00b0) -#define ASSOC_STATUS_M 0x00000003 -#define ASSOC_STATUS_NONE 0 -#define ASSOC_STATUS_PENDING 1 -#define ASSOC_STATUS_ASSOCIATED 2 -#define LED_MODE_M 0x0000001c -#define LED_BLINK_THRESHOLD_M 0x000000e0 -#define LED_SLOW_BLINK_MODE 0x00000100 - -/* - * GPIO - */ - -#define AR531XPLUS_GPIO_DI (AR531XPLUS_DSLBASE + 0x0088) -#define AR531XPLUS_GPIO_DO (AR531XPLUS_DSLBASE + 0x0090) -#define AR531XPLUS_GPIO_CR (AR531XPLUS_DSLBASE + 0x0098) -#define AR531XPLUS_GPIO_INT (AR531XPLUS_DSLBASE + 0x00a0) - -#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -#define GPIO_CR_O(x) (1 << (x)) /* output */ -#define GPIO_CR_I(x) (0 << (x)) /* input */ - -#define GPIO_INT(x,Y) ((x) << (8 * (Y))) /* interrupt enable */ -#define GPIO_INT_M(Y) ((0x3F) << (8 * (Y))) /* mask for int */ -#define GPIO_INT_LVL(x,Y) ((x) << (8 * (Y) + 6)) /* interrupt level */ -#define GPIO_INT_LVL_M(Y) ((0x3) << (8 * (Y) + 6)) /* mask for int level */ - -#define AR531XPLUS_RESET_GPIO 5 -#define AR531XPLUS_NUM_GPIO 22 - - -/* - * PCI Clock Control - */ - -#define AR531XPLUS_PCICLK (AR531XPLUS_DSLBASE + 0x00a4) - -#define PCICLK_INPUT_M 0x3 -#define PCICLK_INPUT_S 0 - -#define PCICLK_PLLC_CLKM 0 -#define PCICLK_PLLC_CLKM1 1 -#define PCICLK_PLLC_CLKC 2 -#define PCICLK_REF_CLK 3 - -#define PCICLK_DIV_M 0xc -#define PCICLK_DIV_S 2 - -#define PCICLK_IN_FREQ 0 -#define PCICLK_IN_FREQ_DIV_6 1 -#define PCICLK_IN_FREQ_DIV_8 2 -#define PCICLK_IN_FREQ_DIV_10 3 - -/* - * Observation Control Register - */ -#define AR531XPLUS_OCR (AR531XPLUS_DSLBASE + 0x00b0) -#define OCR_GPIO0_IRIN 0x0040 -#define OCR_GPIO1_IROUT 0x0080 -#define OCR_GPIO3_RXCLR 0x0200 - -/* - * General Clock Control - */ - -#define AR531XPLUS_MISCCLK (AR531XPLUS_DSLBASE + 0x00b4) -#define MISCCLK_PLLBYPASS_EN 0x00000001 -#define MISCCLK_PROCREFCLK 0x00000002 - -/* - * SDRAM Controller - * - No read or write buffers are included. - */ -#define AR531XPLUS_MEM_CFG (AR531XPLUS_SDRAMCTL + 0x00) -#define AR531XPLUS_MEM_CTRL (AR531XPLUS_SDRAMCTL + 0x0c) -#define AR531XPLUS_MEM_REF (AR531XPLUS_SDRAMCTL + 0x10) - -#define SDRAM_DATA_WIDTH_M 0x00006000 -#define SDRAM_DATA_WIDTH_S 13 - -#define SDRAM_COL_WIDTH_M 0x00001E00 -#define SDRAM_COL_WIDTH_S 9 - -#define SDRAM_ROW_WIDTH_M 0x000001E0 -#define SDRAM_ROW_WIDTH_S 5 - -#define SDRAM_BANKADDR_BITS_M 0x00000018 -#define SDRAM_BANKADDR_BITS_S 3 - - -/* - * SDRAM Memory Refresh (MEM_REF) value is computed as: - * MEMCTL_SREFR = (Tr * hclk_freq) / R - * where Tr is max. time of refresh of any single row - * R is number of rows in the DRAM - * For most 133MHz SDRAM parts, Tr=64ms, R=4096 or 8192 - */ -#if defined(COBRA_EMUL) -#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x96 -#else -#if defined(DEFAULT_PLL) -#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x200 -#else -#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x61a -#endif /* ! DEFAULT_PLL */ -#endif - -#if defined(AR531XPLUS) - -#define AR531XPLUS_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */ -#define AR531XPLUS_SDRAM_DATA_WIDTH 16 /* bits */ -#define AR531XPLUS_SDRAM_COL_WIDTH 8 -#define AR531XPLUS_SDRAM_ROW_WIDTH 12 - -#else - -#define AR531XPLUS_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */ -#define AR531XPLUS_SDRAM_DATA_WIDTH 16 -#define AR531XPLUS_SDRAM_COL_WIDTH 8 -#define AR531XPLUS_SDRAM_ROW_WIDTH 12 - -#endif /* ! AR531XPLUS */ - -/* - * SPI Flash Interface Registers - */ - -#define AR531XPLUS_SPI_CTL (AR531XPLUS_SPI + 0x00) -#define AR531XPLUS_SPI_OPCODE (AR531XPLUS_SPI + 0x04) -#define AR531XPLUS_SPI_DATA (AR531XPLUS_SPI + 0x08) - -#define SPI_CTL_START 0x00000100 -#define SPI_CTL_BUSY 0x00010000 -#define SPI_CTL_TXCNT_MASK 0x0000000f -#define SPI_CTL_RXCNT_MASK 0x000000f0 -#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff -#define SPI_CTL_SIZE_MASK 0x00060000 - -#define SPI_CTL_CLK_SEL_MASK 0x03000000 -#define SPI_OPCODE_MASK 0x000000ff - -/* - * PCI-MAC Configuration registers - */ -#define PCI_MAC_RC (AR531XPLUS_PCI + 0x4000) -#define PCI_MAC_SCR (AR531XPLUS_PCI + 0x4004) -#define PCI_MAC_INTPEND (AR531XPLUS_PCI + 0x4008) -#define PCI_MAC_SFR (AR531XPLUS_PCI + 0x400C) -#define PCI_MAC_PCICFG (AR531XPLUS_PCI + 0x4010) -#define PCI_MAC_SREV (AR531XPLUS_PCI + 0x4020) - -#define PCI_MAC_RC_MAC 0x00000001 -#define PCI_MAC_RC_BB 0x00000002 - -#define PCI_MAC_SCR_SLMODE_M 0x00030000 -#define PCI_MAC_SCR_SLMODE_S 16 -#define PCI_MAC_SCR_SLM_FWAKE 0 -#define PCI_MAC_SCR_SLM_FSLEEP 1 -#define PCI_MAC_SCR_SLM_NORMAL 2 - -#define PCI_MAC_SFR_SLEEP 0x00000001 - -#define PCI_MAC_PCICFG_SPWR_DN 0x00010000 - - - - -/* - * PCI Bus Interface Registers - */ -#define AR531XPLUS_PCI_1MS_REG (AR531XPLUS_PCI + 0x0008) -#define AR531XPLUS_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ - -#define AR531XPLUS_PCI_MISC_CONFIG (AR531XPLUS_PCI + 0x000c) -#define AR531XPLUS_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ -#define AR531XPLUS_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ -#define AR531XPLUS_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ -#define AR531XPLUS_PCIMISC_RST_MODE 0x00000030 -#define AR531XPLUS_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ -#define AR531XPLUS_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ -#define AR531XPLUS_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ -#define AR531XPLUS_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ -#define AR531XPLUS_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ -#define AR531XPLUS_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ -#define AR531XPLUS_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ -#define AR531XPLUS_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ - -#define AR531XPLUS_PCI_OUT_TSTAMP (AR531XPLUS_PCI + 0x0010) - -#define AR531XPLUS_PCI_UNCACHE_CFG (AR531XPLUS_PCI + 0x0014) - -#define AR531XPLUS_PCI_IN_EN (AR531XPLUS_PCI + 0x0100) -#define AR531XPLUS_PCI_IN_EN0 0x01 /* Enable chain 0 */ -#define AR531XPLUS_PCI_IN_EN1 0x02 /* Enable chain 1 */ -#define AR531XPLUS_PCI_IN_EN2 0x04 /* Enable chain 2 */ -#define AR531XPLUS_PCI_IN_EN3 0x08 /* Enable chain 3 */ - -#define AR531XPLUS_PCI_IN_DIS (AR531XPLUS_PCI + 0x0104) -#define AR531XPLUS_PCI_IN_DIS0 0x01 /* Disable chain 0 */ -#define AR531XPLUS_PCI_IN_DIS1 0x02 /* Disable chain 1 */ -#define AR531XPLUS_PCI_IN_DIS2 0x04 /* Disable chain 2 */ -#define AR531XPLUS_PCI_IN_DIS3 0x08 /* Disable chain 3 */ - -#define AR531XPLUS_PCI_IN_PTR (AR531XPLUS_PCI + 0x0200) - -#define AR531XPLUS_PCI_OUT_EN (AR531XPLUS_PCI + 0x0400) -#define AR531XPLUS_PCI_OUT_EN0 0x01 /* Enable chain 0 */ - -#define AR531XPLUS_PCI_OUT_DIS (AR531XPLUS_PCI + 0x0404) -#define AR531XPLUS_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ - -#define AR531XPLUS_PCI_OUT_PTR (AR531XPLUS_PCI + 0x0408) - -#define AR531XPLUS_PCI_INT_STATUS (AR531XPLUS_PCI + 0x0500) /* write one to clr */ -#define AR531XPLUS_PCI_TXINT 0x00000001 /* Desc In Completed */ -#define AR531XPLUS_PCI_TXOK 0x00000002 /* Desc In OK */ -#define AR531XPLUS_PCI_TXERR 0x00000004 /* Desc In ERR */ -#define AR531XPLUS_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ -#define AR531XPLUS_PCI_RXINT 0x00000010 /* Desc Out Completed */ -#define AR531XPLUS_PCI_RXOK 0x00000020 /* Desc Out OK */ -#define AR531XPLUS_PCI_RXERR 0x00000040 /* Desc Out ERR */ -#define AR531XPLUS_PCI_RXEOL 0x00000080 /* Desc Out EOL */ -#define AR531XPLUS_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ -#define AR531XPLUS_PCI_MASK 0x0000FFFF /* Desc Mask */ -#define AR531XPLUS_PCI_EXT_INT 0x02000000 -#define AR531XPLUS_PCI_ABORT_INT 0x04000000 - -#define AR531XPLUS_PCI_INT_MASK (AR531XPLUS_PCI + 0x0504) /* same as INT_STATUS */ - -#define AR531XPLUS_PCI_INTEN_REG (AR531XPLUS_PCI + 0x0508) -#define AR531XPLUS_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ -#define AR531XPLUS_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ - -#define AR531XPLUS_PCI_HOST_IN_EN (AR531XPLUS_PCI + 0x0800) -#define AR531XPLUS_PCI_HOST_IN_DIS (AR531XPLUS_PCI + 0x0804) -#define AR531XPLUS_PCI_HOST_IN_PTR (AR531XPLUS_PCI + 0x0810) -#define AR531XPLUS_PCI_HOST_OUT_EN (AR531XPLUS_PCI + 0x0900) -#define AR531XPLUS_PCI_HOST_OUT_DIS (AR531XPLUS_PCI + 0x0904) -#define AR531XPLUS_PCI_HOST_OUT_PTR (AR531XPLUS_PCI + 0x0908) - - -/* - * Local Bus Interface Registers - */ -#define AR531XPLUS_LB_CONFIG (AR531XPLUS_LOCAL + 0x0000) -#define AR531XPLUS_LBCONF_OE 0x00000001 /* =1 OE is low-true */ -#define AR531XPLUS_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ -#define AR531XPLUS_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ -#define AR531XPLUS_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ -#define AR531XPLUS_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ -#define AR531XPLUS_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ -#define AR531XPLUS_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ -#define AR531XPLUS_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ -#define AR531XPLUS_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ -#define AR531XPLUS_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ -#define AR531XPLUS_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ -#define AR531XPLUS_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ -#define AR531XPLUS_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ -#define AR531XPLUS_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ -#define AR531XPLUS_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ -#define AR531XPLUS_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ -#define AR531XPLUS_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ -#define AR531XPLUS_LBCONF_INT 0x00020000 /* =1 Intr is low true */ -#define AR531XPLUS_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ -#define AR531XPLUS_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ -#define AR531XPLUS_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ -#define AR531XPLUS_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ -#define AR531XPLUS_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ -#define AR531XPLUS_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ -#define AR531XPLUS_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ - -#define AR531XPLUS_LB_CLKSEL (AR531XPLUS_LOCAL + 0x0004) -#define AR531XPLUS_LBCLK_EXT 0x0001 /* use external clk for lb */ - -#define AR531XPLUS_LB_1MS (AR531XPLUS_LOCAL + 0x0008) -#define AR531XPLUS_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ - -#define AR531XPLUS_LB_MISCCFG (AR531XPLUS_LOCAL + 0x000C) -#define AR531XPLUS_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ -#define AR531XPLUS_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ -#define AR531XPLUS_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ -#define AR531XPLUS_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ -#define AR531XPLUS_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ -#define AR531XPLUS_LBM_TIMEOUT_MASK 0x00FFFF80 -#define AR531XPLUS_LBM_TIMEOUT_SHFT 7 -#define AR531XPLUS_LBM_PORTMUX 0x07000000 - - -#define AR531XPLUS_LB_RXTSOFF (AR531XPLUS_LOCAL + 0x0010) - -#define AR531XPLUS_LB_TX_CHAIN_EN (AR531XPLUS_LOCAL + 0x0100) -#define AR531XPLUS_LB_TXEN_0 0x01 -#define AR531XPLUS_LB_TXEN_1 0x02 -#define AR531XPLUS_LB_TXEN_2 0x04 -#define AR531XPLUS_LB_TXEN_3 0x08 - -#define AR531XPLUS_LB_TX_CHAIN_DIS (AR531XPLUS_LOCAL + 0x0104) -#define AR531XPLUS_LB_TX_DESC_PTR (AR531XPLUS_LOCAL + 0x0200) - -#define AR531XPLUS_LB_RX_CHAIN_EN (AR531XPLUS_LOCAL + 0x0400) -#define AR531XPLUS_LB_RXEN 0x01 - -#define AR531XPLUS_LB_RX_CHAIN_DIS (AR531XPLUS_LOCAL + 0x0404) -#define AR531XPLUS_LB_RX_DESC_PTR (AR531XPLUS_LOCAL + 0x0408) - -#define AR531XPLUS_LB_INT_STATUS (AR531XPLUS_LOCAL + 0x0500) -#define AR531XPLUS_INT_TX_DESC 0x0001 -#define AR531XPLUS_INT_TX_OK 0x0002 -#define AR531XPLUS_INT_TX_ERR 0x0004 -#define AR531XPLUS_INT_TX_EOF 0x0008 -#define AR531XPLUS_INT_RX_DESC 0x0010 -#define AR531XPLUS_INT_RX_OK 0x0020 -#define AR531XPLUS_INT_RX_ERR 0x0040 -#define AR531XPLUS_INT_RX_EOF 0x0080 -#define AR531XPLUS_INT_TX_TRUNC 0x0100 -#define AR531XPLUS_INT_TX_STARVE 0x0200 -#define AR531XPLUS_INT_LB_TIMEOUT 0x0400 -#define AR531XPLUS_INT_LB_ERR 0x0800 -#define AR531XPLUS_INT_MBOX_WR 0x1000 -#define AR531XPLUS_INT_MBOX_RD 0x2000 - -/* Bit definitions for INT MASK are the same as INT_STATUS */ -#define AR531XPLUS_LB_INT_MASK (AR531XPLUS_LOCAL + 0x0504) - -#define AR531XPLUS_LB_INT_EN (AR531XPLUS_LOCAL + 0x0508) -#define AR531XPLUS_LB_MBOX (AR531XPLUS_LOCAL + 0x0600) - - - -/* - * IR Interface Registers - */ -#define AR531XPLUS_IR_PKTDATA (AR531XPLUS_IR + 0x0000) - -#define AR531XPLUS_IR_PKTLEN (AR531XPLUS_IR + 0x07fc) /* 0 - 63 */ - -#define AR531XPLUS_IR_CONTROL (AR531XPLUS_IR + 0x0800) -#define AR531XPLUS_IRCTL_TX 0x00000000 /* use as tranmitter */ -#define AR531XPLUS_IRCTL_RX 0x00000001 /* use as receiver */ -#define AR531XPLUS_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ -#define AR531XPLUS_IRCTL_SAMPLECLK_SHFT 1 -#define AR531XPLUS_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ -#define AR531XPLUS_IRCTL_OUTPUTCLK_SHFT 14 - -#define AR531XPLUS_IR_STATUS (AR531XPLUS_IR + 0x0804) -#define AR531XPLUS_IRSTS_RX 0x00000001 /* receive in progress */ -#define AR531XPLUS_IRSTS_TX 0x00000002 /* transmit in progress */ - -#define AR531XPLUS_IR_CONFIG (AR531XPLUS_IR + 0x0808) -#define AR531XPLUS_IRCFG_INVIN 0x00000001 /* invert input polarity */ -#define AR531XPLUS_IRCFG_INVOUT 0x00000002 /* invert output polarity */ -#define AR531XPLUS_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ -#define AR531XPLUS_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ -#define AR531XPLUS_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ -#define AR531XPLUS_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ -#define AR531XPLUS_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ -#define AR531XPLUS_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ -#define AR531XPLUS_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ - -/* - * PCI memory constants: Memory area 1 and 2 are the same size - - * (twice the PCI_TLB_PAGE_SIZE). The definition of - * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine - * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size - * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space. - */ - -#define CPU_TO_PCI_MEM_BASE1 0xE0000000 -#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE) - - -/* TLB attributes for PCI transactions */ - -#define PCI_MMU_PAGEMASK 0x00003FFF -#define MMU_PAGE_UNCACHED 0x00000010 -#define MMU_PAGE_DIRTY 0x00000004 -#define MMU_PAGE_VALID 0x00000002 -#define MMU_PAGE_GLOBAL 0x00000001 -#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\ - MMU_PAGE_VALID|MMU_PAGE_GLOBAL) -#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */ -#define PCI_MEMORY_SPACE1_PHYS 0x80000000 -#define PCI_TLB_PAGE_SIZE 0x01000000 -#define TLB_HI_MASK 0xFFFFE000 -#define TLB_LO_MASK 0x3FFFFFFF -#define PAGEMASK_SHIFT 11 -#define TLB_LO_SHIFT 6 - -#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */ - -#define HOST_PCI_DEV_ID 3 -#define HOST_PCI_MBAR0 0x10000000 -#define HOST_PCI_MBAR1 0x20000000 -#define HOST_PCI_MBAR2 0x30000000 - -#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 -#define PCI_DEVICE_MEM_SPACE 0x800000 - - -typedef unsigned int AR531X_REG; - -#define sysRegRead(phys) \ - (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) - -#define sysRegWrite(phys, val) \ - ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) - - - -/* - * This is board-specific data that is stored in a "fixed" location in flash. - * It is shared across operating systems, so it should not be changed lightly. - * The main reason we need it is in order to extract the ethernet MAC - * address(es). - */ -struct ar531x_boarddata { - u32 magic; /* board data is valid */ -#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ - u16 cksum; /* checksum (starting with BD_REV 2) */ - u16 rev; /* revision of this struct */ -#define BD_REV 4 - char boardName[64]; /* Name of board */ - u16 major; /* Board major number */ - u16 minor; /* Board minor number */ - u32 config; /* Board configuration */ -#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ -#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ -#define BD_UART1 0x00000004 /* UART1 is stuffed */ -#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ -#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ -#define BD_SYSLED 0x00000020 /* System LED stuffed */ -#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ -#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ -#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ -#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ -#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ -#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ -#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ -#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ -#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ -#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ -#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ -#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ - u16 resetConfigGpio; /* Reset factory GPIO pin */ - u16 sysLedGpio; /* System LED GPIO pin */ - - u32 cpuFreq; /* CPU core frequency in Hz */ - u32 sysFreq; /* System frequency in Hz */ - u32 cntFreq; /* Calculated C0_COUNT frequency */ - - u8 wlan0Mac[6]; - u8 enet0Mac[6]; - u8 enet1Mac[6]; - - u16 pciId; /* Pseudo PCIID for common code */ - u16 memCap; /* cap bank1 in MB */ - - /* version 3 */ - u8 wlan1Mac[6]; /* (ar5212) */ -}; - -#endif - -#endif /* AR531X_H */ |