8 files changed, 0 insertions, 270 deletions
diff --git a/package/firewall/files/new/20-firewall b/package/firewall/files/20-firewall
index 126fb9bad0..126fb9bad0 100644
--- a/package/firewall/files/new/20-firewall
+++ b/package/firewall/files/20-firewall
diff --git a/package/firewall/files/new/firewall.config b/package/firewall/files/firewall.config
index 073169013d..073169013d 100755
--- a/package/firewall/files/new/firewall.config
+++ b/package/firewall/files/firewall.config
diff --git a/package/firewall/files/new/firewall.init b/package/firewall/files/firewall.init
index 26855f39ad..26855f39ad 100755
--- a/package/firewall/files/new/firewall.init
+++ b/package/firewall/files/firewall.init
diff --git a/package/firewall/files/old/firewall.awk b/package/firewall/files/old/firewall.awk
deleted file mode 100644
index 31dbae0f33..0000000000
--- a/package/firewall/files/old/firewall.awk
+++ /dev/null
@@ -1,50 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-BEGIN {
-	FS=":"
-}
-
-($1 == "accept") || ($1 == "drop") || ($1 == "forward") {
-	delete _opt
-	str2data($2)
-	if ((_l["proto"] == "") && (_l["sport"] _l["dport"] != "")) {
-		_opt[0] = " -p tcp"
-		_opt[1] = " -p udp"
-	} else {
-		_opt[0] = ""
-	}
-}
-
-($1 == "accept") {
-	target = " -j ACCEPT"
-	for (o in _opt) {
-		print "iptables -t nat -A prerouting_wan" _opt[o] str2ipt($2) target
-		print "iptables        -A input_wan     " _opt[o] str2ipt($2) target
-		print ""
-	}
-}
-
-($1 == "drop") {
-	for (o in _opt) {
-		print "iptables -t nat -A prerouting_wan" _opt[o] str2ipt($2) " -j DROP"
-		print ""
-	}
-}
-
-($1 == "forward") {
-	target = " -j DNAT --to " $3
-	fwopts = ""
-	if ($4 != "") {
-		if ((_l["proto"] == "tcp") || (_l["proto"] == "udp") || (_l["proto"] == "")) {
-			if (_l["proto"] != "") fwopts = " -p " _l["proto"]
-			fwopts = fwopts " --dport " $4
-			target = target ":" $4
-		}
-		else fwopts = ""
-	}
-	for (o in _opt) {
-		print "iptables -t nat -A prerouting_wan" _opt[o] str2ipt($2) target
-		print "iptables        -A forwarding_wan   " _opt[o] " -d " $3 fwopts " -j ACCEPT"
-		print ""
-	}
-}
diff --git a/package/firewall/files/old/firewall.config b/package/firewall/files/old/firewall.config
deleted file mode 100644
index 1b92954c93..0000000000
--- a/package/firewall/files/old/firewall.config
+++ /dev/null
@@ -1,48 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-# RULE SYNTAX:
-#
-# forward:<match>:<target>[:<port>]
-# 	- forwards all packets matched by <match> to <target>,
-# 	  optionally changing the port to <port>
-#
-# accept:<match>
-# 	- accepts all traffic matched by <match>
-#
-# drop:<match>
-#	- drops all traffic matched by <match>
-#
-#
-# MATCHING OPTIONS:
-#
-# src=<ip>
-# 	- match the source ip <ip>
-#
-# dest=<ip>
-# 	- match the destination ip <ip>
-#
-# proto=<proto>
-# 	- match the protocol by name or number
-#
-# sport=<port(s)>
-# 	- match the source port(s), see below for syntax
-#
-# dport=<port(s)>
-# 	- match the destination port(s), see below for syntax
-#
-#
-#
-# PORT SYNTAX:
-#
-# You can enter an arbitrary list of ports and port ranges in the following format:
-#   - 22,53,993,1000-1024 
-#
-# If you don't set the protocol to tcp or udp, it will apply to both
-#
-#
-#
-# EXAMPLES:
-#
-# drop:dport=22 src=1.3.3.7
-# accept:proto=tcp dport=22
-# forward:dport=60168:192.168.1.2:60169
diff --git a/package/firewall/files/old/firewall.init b/package/firewall/files/old/firewall.init
deleted file mode 100755
index 0da97f836f..0000000000
--- a/package/firewall/files/old/firewall.init
+++ /dev/null
@@ -1,142 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-## Please make changes in /etc/firewall.user
-START=45
-start() {
-	include /lib/network
-	scan_interfaces
-	
-	config_get WAN wan ifname
-	config_get WANDEV wan device
-	config_get LAN lan ifname
-	config_get_bool NAT_LAN lan nat 1
-	if [ $NAT_LAN -ne 0 ]
-	then
-		config_get LAN_MASK lan netmask
-		config_get LAN_IP lan ipaddr
-		LAN_NET=$(/bin/ipcalc.sh $LAN_IP $LAN_MASK | grep NETWORK | cut -d= -f2)
-	fi
-	
-	## CLEAR TABLES
-	for T in filter nat; do
-		iptables -t $T -F
-		iptables -t $T -X
-	done
-	
-	iptables -N input_rule
-	iptables -N input_wan
-	iptables -N output_rule
-	iptables -N forwarding_rule
-	iptables -N forwarding_wan
-
-	iptables -t nat -N NEW
-	iptables -t nat -N prerouting_rule
-	iptables -t nat -N prerouting_wan
-	iptables -t nat -N postrouting_rule
-	
-	iptables -N LAN_ACCEPT
-	[ -z "$WAN" ] || iptables -A LAN_ACCEPT -i "$WAN" -j RETURN
-	[ -z "$WANDEV" -o "$WANDEV" = "$WAN" ] || iptables -A LAN_ACCEPT -i "$WANDEV" -j RETURN
-	iptables -A LAN_ACCEPT -j ACCEPT
-	
-	### INPUT
-	###  (connections with the router as destination)
-	
-	# base case
-	iptables -P INPUT DROP
-	iptables -A INPUT -m state --state INVALID -j DROP
-	iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-	iptables -A INPUT -p tcp --tcp-flags SYN SYN --tcp-option \! 2 -j  DROP
-	
-	#
-	# insert accept rule or to jump to new accept-check table here
-	#
-	iptables -A INPUT -j input_rule
-	[ -z "$WAN" ] || iptables -A INPUT -i $WAN -j input_wan
-	
-	# allow
-	iptables -A INPUT -j LAN_ACCEPT	# allow from lan/wifi interfaces 
-	iptables -A INPUT -p icmp	-j ACCEPT	# allow ICMP
-	iptables -A INPUT -p gre	-j ACCEPT	# allow GRE
-	
-	# reject (what to do with anything not allowed earlier)
-	iptables -A INPUT -p tcp -j REJECT --reject-with tcp-reset
-	iptables -A INPUT -j REJECT --reject-with icmp-port-unreachable
-	
-	### OUTPUT
-	### (connections with the router as source)
-	
-	# base case
-	iptables -P OUTPUT DROP
-	iptables -A OUTPUT -m state --state INVALID -j DROP
-	iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-	
-	#
-	# insert accept rule or to jump to new accept-check table here
-	#
-	iptables -A OUTPUT -j output_rule
-	
-	# allow
-	iptables -A OUTPUT -j ACCEPT		#allow everything out
-	
-	# reject (what to do with anything not allowed earlier)
-	iptables -A OUTPUT -p tcp -j REJECT --reject-with tcp-reset
-	iptables -A OUTPUT -j REJECT --reject-with icmp-port-unreachable
-	
-	### FORWARDING
-	### (connections routed through the router)
-	
-	# base case
-	iptables -P FORWARD DROP 
-	iptables -A FORWARD -m state --state INVALID -j DROP
-	iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-	iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
-	
-	#
-	# insert accept rule or to jump to new accept-check table here
-	#
-	iptables -A FORWARD -j forwarding_rule
-	[ -z "$WAN" ] || iptables -A FORWARD -i $WAN -j forwarding_wan
-	
-	# allow
-	iptables -A FORWARD -i $LAN -o $LAN -j ACCEPT
-	[ -z "$WAN" ] || iptables -A FORWARD -i $LAN -o $WAN -j ACCEPT
-	
-	# reject (what to do with anything not allowed earlier)
-	# uses the default -P DROP
-	
-	### MASQ
-	iptables -t nat -A PREROUTING -m state --state NEW -p tcp -j NEW 
-	iptables -t nat -A PREROUTING -j prerouting_rule
-	[ -z "$WAN" ] || iptables -t nat -A PREROUTING -i "$WAN" -j prerouting_wan
-	iptables -t nat -A POSTROUTING -j postrouting_rule
-	### Only LAN, unless told not to
-	if [ $NAT_LAN -ne 0 ]
-	then
-		[ -z "$WAN" ] || iptables -t nat -A POSTROUTING --src $LAN_NET/$LAN_MASK -o $WAN -j MASQUERADE
-	fi
-
-	iptables -t nat -A NEW -m limit --limit 50 --limit-burst 100 -j RETURN && \
-		iptables -t nat -A NEW -j DROP
-
-	## USER RULES
-	[ -f /etc/firewall.user ] && . /etc/firewall.user
-	[ -n "$WAN" -a -e /etc/firewall.config ] && {
-		export WAN
-		awk -f /usr/lib/common.awk -f /usr/lib/firewall.awk /etc/firewall.config | ash
-	}
-}
-
-stop() {
-	iptables -P INPUT ACCEPT
-	iptables -P OUTPUT ACCEPT
-	iptables -P FORWARD ACCEPT
-	iptables -F
-	iptables -X
-	iptables -t nat -P PREROUTING ACCEPT
-	iptables -t nat -P POSTROUTING ACCEPT
-	iptables -t nat -P OUTPUT ACCEPT
-	iptables -t nat -F
-	iptables -t nat -X
-}
diff --git a/package/firewall/files/old/firewall.user b/package/firewall/files/old/firewall.user
deleted file mode 100644
index f4eb18ef7d..0000000000
--- a/package/firewall/files/old/firewall.user
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-iptables -F input_rule
-iptables -F output_rule
-iptables -F forwarding_rule
-iptables -t nat -F prerouting_rule
-iptables -t nat -F postrouting_rule
-
-# The following chains are for traffic directed at the IP of the 
-# WAN interface
-
-iptables -F input_wan
-iptables -F forwarding_wan
-iptables -t nat -F prerouting_wan
-
-### Open port to WAN
-## -- This allows port 22 to be answered by (dropbear on) the router
-# iptables -t nat -A prerouting_wan -p tcp --dport 22 -j ACCEPT 
-# iptables        -A input_wan      -p tcp --dport 22 -j ACCEPT
-
-### Port forwarding
-## -- This forwards port 8080 on the WAN to port 80 on 192.168.1.2
-# iptables -t nat -A prerouting_wan -p tcp --dport 8080 -j DNAT --to 192.168.1.2:80
-# iptables        -A forwarding_wan -p tcp --dport 80 -d 192.168.1.2 -j ACCEPT
-
-### DMZ
-## -- Connections to ports not handled above will be forwarded to 192.168.1.2
-# iptables -t nat -A prerouting_wan -j DNAT --to 192.168.1.2
-# iptables        -A forwarding_wan -d 192.168.1.2 -j ACCEPT
diff --git a/package/firewall/files/new/uci_firewall.sh b/package/firewall/files/uci_firewall.sh
index e1683e9cf0..e1683e9cf0 100755
--- a/package/firewall/files/new/uci_firewall.sh
+++ b/package/firewall/files/uci_firewall.sh