diff options
Diffstat (limited to 'package/boot')
4 files changed, 2 insertions, 533 deletions
diff --git a/package/boot/uboot-mvebu/Makefile b/package/boot/uboot-mvebu/Makefile index 25dd2526e5..37e93d1f51 100644 --- a/package/boot/uboot-mvebu/Makefile +++ b/package/boot/uboot-mvebu/Makefile @@ -8,10 +8,10 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk -PKG_VERSION:=2020.10 +PKG_VERSION:=2021.01 PKG_RELEASE:=1 -PKG_HASH:=0d481bbdc05c0ee74908ec2f56a6daa53166cc6a78a0e4fac2ac5d025770a622 +PKG_HASH:=b407e1510a74e863b8b5cb42a24625344f0e0c2fc7582d8c866bd899367d0454 include $(INCLUDE_DIR)/u-boot.mk include $(INCLUDE_DIR)/package.mk @@ -42,13 +42,6 @@ define U-Boot/espressobin UBOOT_CONFIG:=mvebu_espressobin-88f3720 endef -define U-Boot/espressobin-emmc - NAME:=Marvell ESPRESSObin - BUILD_SUBTARGET:=cortexa53 - UBOOT_CONFIG:=mvebu_espressobin-88f3720 - UBOOT_MAKE_FLAGS+=DEVICE_TREE=armada-3720-espressobin-emmc -endef - define U-Boot/uDPU NAME:=Methode uDPU BUILD_SUBTARGET:=cortexa53 @@ -58,7 +51,6 @@ UBOOT_TARGETS:= \ clearfog \ helios4 \ espressobin \ - espressobin-emmc \ uDPU Build/Exports:=$(Host/Exports) diff --git a/package/boot/uboot-mvebu/patches/131-arm64-dts-armada-3720-espressobin-use-Linux-model-co.patch b/package/boot/uboot-mvebu/patches/131-arm64-dts-armada-3720-espressobin-use-Linux-model-co.patch deleted file mode 100644 index 85c61098f8..0000000000 --- a/package/boot/uboot-mvebu/patches/131-arm64-dts-armada-3720-espressobin-use-Linux-model-co.patch +++ /dev/null @@ -1,64 +0,0 @@ -From cdcfd9211c805624a702b6ff81b9bd9515344749 Mon Sep 17 00:00:00 2001 -From: Andre Heider <a.heider@gmail.com> -Date: Fri, 4 Sep 2020 16:34:22 +0200 -Subject: [PATCH] arm64: dts: armada-3720-espressobin: use Linux - model/compatible strings - -Fix the actual board vendor and ease synching dts files from Linux. - -Signed-off-by: Andre Heider <a.heider@gmail.com> ---- - arch/arm/dts/armada-3720-espressobin.dts | 4 ++-- - board/Marvell/mvebu_armada-37xx/board.c | 8 ++++---- - 2 files changed, 6 insertions(+), 6 deletions(-) - ---- a/arch/arm/dts/armada-3720-espressobin.dts -+++ b/arch/arm/dts/armada-3720-espressobin.dts -@@ -50,8 +50,8 @@ - #include "armada-372x.dtsi" - - / { -- model = "Marvell Armada 3720 Community Board ESPRESSOBin"; -- compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710"; -+ model = "Globalscale Marvell ESPRESSOBin Board"; -+ compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; - - chosen { - stdout-path = "serial0:115200n8"; ---- a/board/Marvell/mvebu_armada-37xx/board.c -+++ b/board/Marvell/mvebu_armada-37xx/board.c -@@ -88,14 +88,14 @@ int board_late_init(void) - if (env_get("fdtfile")) - return 0; - -- if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) -+ if (!of_machine_is_compatible("globalscale,espressobin")) - return 0; - - /* If the memory controller has been configured for DDR4, we're running on v7 */ - ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS) - & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4; - -- emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc"); -+ emmc = of_machine_is_compatible("globalscale,espressobin-emmc"); - - if (ddr4 && emmc) - env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb"); -@@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(str - /* Bring-up board-specific network stuff */ - int board_network_enable(struct mii_dev *bus) - { -- if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) -+ if (!of_machine_is_compatible("globalscale,espressobin")) - return 0; - - /* -@@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd - int part_off; - - /* Fill SPI MTD partitions for Linux kernel on Espressobin */ -- if (!of_machine_is_compatible("marvell,armada-3720-espressobin")) -+ if (!of_machine_is_compatible("globalscale,espressobin")) - return 0; - - spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor"); diff --git a/package/boot/uboot-mvebu/patches/132-arm64-dts-armada-3720-espressobin-split-common-parts.patch b/package/boot/uboot-mvebu/patches/132-arm64-dts-armada-3720-espressobin-split-common-parts.patch deleted file mode 100644 index 1ca8b8d8dc..0000000000 --- a/package/boot/uboot-mvebu/patches/132-arm64-dts-armada-3720-espressobin-split-common-parts.patch +++ /dev/null @@ -1,368 +0,0 @@ -From a9ac1dd46a4fd11880be80227e1eb102e3c61dd8 Mon Sep 17 00:00:00 2001 -From: Andre Heider <a.heider@gmail.com> -Date: Fri, 4 Sep 2020 15:38:58 +0200 -Subject: [PATCH] arm64: dts: armada-3720-espressobin: split common parts - to .dtsi - -Move most of the dts to the new common armada-3720-espressobin.dtsi -file, just like Linux, but keep the current, downstream based, version. - -The dts itself is imported from Linux. - -Signed-off-by: Andre Heider <a.heider@gmail.com> ---- - arch/arm/dts/armada-3720-espressobin.dts | 164 +-------------------- - arch/arm/dts/armada-3720-espressobin.dtsi | 167 ++++++++++++++++++++++ - 2 files changed, 174 insertions(+), 157 deletions(-) - create mode 100644 arch/arm/dts/armada-3720-espressobin.dtsi - ---- a/arch/arm/dts/armada-3720-espressobin.dts -+++ b/arch/arm/dts/armada-3720-espressobin.dts -@@ -1,170 +1,20 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - /* -- * Device Tree file for Marvell Armada 3720 community board -- * (ESPRESSOBin) -+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board - * Copyright (C) 2016 Marvell - * -- * Gregory CLEMENT <gregory.clement@free-electrons.com> -- * Konstantin Porotchkin <kostap@marvell.com> -+ * Romain Perier <romain.perier@free-electrons.com> - * -- * This file is dual-licensed: you can use it either under the terms -- * of the GPL or the X11 license, at your option. Note that this dual -- * licensing only applies to this file, and not this project as a -- * whole. -- * -- * a) This file is free software; you can redistribute it and/or -- * modify it under the terms of the GNU General Public License as -- * published by the Free Software Foundation; either version 2 of the -- * License, or (at your option) any later version. -- * -- * This file is distributed in the hope that it will be useful -- * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- * GNU General Public License for more details. -- * -- * Or, alternatively -- * -- * b) Permission is hereby granted, free of charge, to any person -- * obtaining a copy of this software and associated documentation -- * files (the "Software"), to deal in the Software without -- * restriction, including without limitation the rights to use -- * copy, modify, merge, publish, distribute, sublicense, and/or -- * sell copies of the Software, and to permit persons to whom the -- * Software is furnished to do so, subject to the following -- * conditions: -- * -- * The above copyright notice and this permission notice shall be -- * included in all copies or substantial portions of the Software. -- * -- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND -- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY -- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -- * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+/* -+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf - */ - - /dts-v1/; - --#include "armada-372x.dtsi" -+#include "armada-3720-espressobin.dtsi" - - / { - model = "Globalscale Marvell ESPRESSOBin Board"; - compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; -- -- chosen { -- stdout-path = "serial0:115200n8"; -- }; -- -- aliases { -- ethernet0 = ð0; -- i2c0 = &i2c0; -- spi0 = &spi0; -- }; -- -- memory { -- device_type = "memory"; -- reg = <0x00000000 0x00000000 0x00000000 0x20000000>; -- }; -- -- vcc_sd_reg0: regulator@0 { -- compatible = "regulator-gpio"; -- regulator-name = "vcc_sd0"; -- regulator-min-microvolt = <1800000>; -- regulator-max-microvolt = <3300000>; -- regulator-type = "voltage"; -- states = <1800000 0x1 -- 3300000 0x0>; -- gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; -- }; --}; -- --&comphy { -- max-lanes = <3>; -- phy0 { -- phy-type = <PHY_TYPE_USB3_HOST0>; -- phy-speed = <PHY_SPEED_5G>; -- }; -- -- phy1 { -- phy-type = <PHY_TYPE_PEX0>; -- phy-speed = <PHY_SPEED_2_5G>; -- }; -- -- phy2 { -- phy-type = <PHY_TYPE_SATA0>; -- phy-speed = <PHY_SPEED_5G>; -- }; --}; -- --ð0 { -- status = "okay"; -- pinctrl-names = "default"; -- pinctrl-0 = <&rgmii_pins>, <&smi_pins>; -- phy-mode = "rgmii"; -- phy_addr = <0x1>; -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; --}; -- --&i2c0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&i2c1_pins>; -- status = "okay"; --}; -- --/* CON3 */ --&sata { -- status = "okay"; --}; -- --&sdhci0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&sdio_pins>; -- bus-width = <4>; -- cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; -- vqmmc-supply = <&vcc_sd_reg0>; -- status = "okay"; --}; -- --&spi0 { -- status = "okay"; -- pinctrl-names = "default"; -- pinctrl-0 = <&spi_quad_pins>; -- -- spi-flash@0 { -- #address-cells = <1>; -- #size-cells = <1>; -- compatible = "st,m25p128", "jedec,spi-nor"; -- reg = <0>; /* Chip select 0 */ -- spi-max-frequency = <50000000>; -- m25p,fast-read; -- }; --}; -- --/* Exported on the micro USB connector CON32 through an FTDI */ --&uart0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart1_pins>; -- status = "okay"; --}; -- --/* CON29 */ --&usb2 { -- status = "okay"; --}; -- --/* CON31 */ --&usb3 { -- status = "okay"; --}; -- --&pcie0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&pcie_pins>; -- reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; -- status = "okay"; - }; ---- /dev/null -+++ b/arch/arm/dts/armada-3720-espressobin.dtsi -@@ -0,0 +1,167 @@ -+/* -+ * Device Tree file for Marvell Armada 3720 community board -+ * (ESPRESSOBin) -+ * Copyright (C) 2016 Marvell -+ * -+ * Gregory CLEMENT <gregory.clement@free-electrons.com> -+ * Konstantin Porotchkin <kostap@marvell.com> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+ -+#include "armada-372x.dtsi" -+ -+/ { -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ aliases { -+ ethernet0 = ð0; -+ i2c0 = &i2c0; -+ spi0 = &spi0; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>; -+ }; -+ -+ vcc_sd_reg0: regulator@0 { -+ compatible = "regulator-gpio"; -+ regulator-name = "vcc_sd0"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-type = "voltage"; -+ states = <1800000 0x1 -+ 3300000 0x0>; -+ gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; -+ }; -+}; -+ -+&comphy { -+ max-lanes = <3>; -+ phy0 { -+ phy-type = <PHY_TYPE_USB3_HOST0>; -+ phy-speed = <PHY_SPEED_5G>; -+ }; -+ -+ phy1 { -+ phy-type = <PHY_TYPE_PEX0>; -+ phy-speed = <PHY_SPEED_2_5G>; -+ }; -+ -+ phy2 { -+ phy-type = <PHY_TYPE_SATA0>; -+ phy-speed = <PHY_SPEED_5G>; -+ }; -+}; -+ -+ð0 { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rgmii_pins>, <&smi_pins>; -+ phy-mode = "rgmii"; -+ phy_addr = <0x1>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ status = "okay"; -+}; -+ -+/* CON3 */ -+&sata { -+ status = "okay"; -+}; -+ -+&sdhci0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ bus-width = <4>; -+ cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; -+ vqmmc-supply = <&vcc_sd_reg0>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi_quad_pins>; -+ -+ spi-flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "st,m25p128", "jedec,spi-nor"; -+ reg = <0>; /* Chip select 0 */ -+ spi-max-frequency = <50000000>; -+ m25p,fast-read; -+ }; -+}; -+ -+/* Exported on the micro USB connector CON32 through an FTDI */ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+/* CON29 */ -+&usb2 { -+ status = "okay"; -+}; -+ -+/* CON31 */ -+&usb3 { -+ status = "okay"; -+}; -+ -+&pcie0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pcie_pins>; -+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+}; diff --git a/package/boot/uboot-mvebu/patches/133-arm64-dts-a3720-add-support-for-boards-with-populate.patch b/package/boot/uboot-mvebu/patches/133-arm64-dts-a3720-add-support-for-boards-with-populate.patch deleted file mode 100644 index 1e2944b5a2..0000000000 --- a/package/boot/uboot-mvebu/patches/133-arm64-dts-a3720-add-support-for-boards-with-populate.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 408bba2fb84ad0b02c3f9529065126b40899e256 Mon Sep 17 00:00:00 2001 -From: Andre Heider <a.heider@gmail.com> -Date: Fri, 4 Sep 2020 15:44:41 +0200 -Subject: [PATCH] arm64: dts: a3720: add support for espressobin with - populated emmc - -Import armada-3720-espressobin-emmc.dts from Linux, but use sdhc1 for -emmc, since our dtsi is still based on downstream and sdhc0 is used for -the sd card. - -Signed-off-by: Andre Heider <a.heider@gmail.com> ---- - arch/arm/dts/Makefile | 1 + - arch/arm/dts/armada-3720-espressobin-emmc.dts | 44 +++++++++++++++++++ - doc/README.marvell | 7 ++- - 3 files changed, 50 insertions(+), 2 deletions(-) - create mode 100644 arch/arm/dts/armada-3720-espressobin-emmc.dts - ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -202,6 +202,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harm - dtb-$(CONFIG_ARCH_MVEBU) += \ - armada-3720-db.dtb \ - armada-3720-espressobin.dtb \ -+ armada-3720-espressobin-emmc.dtb \ - armada-3720-turris-mox.dtb \ - armada-3720-uDPU.dtb \ - armada-375-db.dtb \ ---- /dev/null -+++ b/arch/arm/dts/armada-3720-espressobin-emmc.dts -@@ -0,0 +1,44 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC -+ * Copyright (C) 2018 Marvell -+ * -+ * Romain Perier <romain.perier@free-electrons.com> -+ * Konstantin Porotchkin <kostap@marvell.com> -+ * -+ */ -+/* -+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf -+ */ -+ -+/dts-v1/; -+ -+#include "armada-3720-espressobin.dtsi" -+ -+/ { -+ model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; -+ compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", -+ "marvell,armada3720", "marvell,armada3710"; -+}; -+ -+/* U11 */ -+&sdhci1 { -+ non-removable; -+ bus-width = <8>; -+ mmc-ddr-1_8v; -+ mmc-hs400-1_8v; -+ marvell,xenon-emmc; -+ marvell,xenon-tun-count = <9>; -+ marvell,pad-type = "fixed-1-8v"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc_pins>; -+ status = "okay"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mmccard: mmccard@0 { -+ compatible = "mmc-card"; -+ reg = <0>; -+ }; -+}; ---- a/doc/README.marvell -+++ b/doc/README.marvell -@@ -43,8 +43,11 @@ Build Procedure - In order to prevent this, the required device-tree MUST be set during compilation. - All device-tree files are located in ./arch/arm/dts/ folder. - -- For other DB boards (MacchiatoBin, EspressoBin and 3700 DB board) compile u-boot with -- just default device-tree from defconfig using: -+ For the EspressoBin board with populated eMMC device use -+ # make DEVICE_TREE=armada-3720-espressobin-emmc -+ -+ For other DB boards (MacchiatoBin, EspressoBin without soldered eMMC and 3700 DB board) -+ compile u-boot with just default device-tree from defconfig using: - - # make - |