diff options
5 files changed, 289 insertions, 0 deletions
diff --git a/target/linux/generic/backport-5.15/821-v5.16-Bluetooth-btusb-Support-public-address-configuration.patch b/target/linux/generic/backport-5.15/821-v5.16-Bluetooth-btusb-Support-public-address-configuration.patch new file mode 100644 index 0000000000..feaabc9d11 --- /dev/null +++ b/target/linux/generic/backport-5.15/821-v5.16-Bluetooth-btusb-Support-public-address-configuration.patch @@ -0,0 +1,51 @@ +From 5cb03751455c299b1bf10cb48631bf359cfb11b5 Mon Sep 17 00:00:00 2001 +From: "mark-yw.chen" <mark-yw.chen@mediatek.com> +Date: Wed, 1 Sep 2021 11:32:25 +0800 +Subject: [PATCH 1/5] Bluetooth: btusb: Support public address configuration + for MediaTek Chip. + +The MediaTek chip support vendor specific HCI command(0xfc1a) to +change the public address. Add hdev->set_bdaddr handler for MediaTek +Chip. After doing a power cycle or MediaTek Bluetooth reset, BD_ADDR +will bring back the original one. + +Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com> +Signed-off-by: Marcel Holtmann <marcel@holtmann.org> +--- + drivers/bluetooth/btusb.c | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +--- a/drivers/bluetooth/btusb.c ++++ b/drivers/bluetooth/btusb.c +@@ -2263,6 +2263,23 @@ struct btmtk_section_map { + }; + } __packed; + ++static int btusb_set_bdaddr_mtk(struct hci_dev *hdev, const bdaddr_t *bdaddr) ++{ ++ struct sk_buff *skb; ++ long ret; ++ ++ skb = __hci_cmd_sync(hdev, 0xfc1a, sizeof(bdaddr), bdaddr, HCI_INIT_TIMEOUT); ++ if (IS_ERR(skb)) { ++ ret = PTR_ERR(skb); ++ bt_dev_err(hdev, "changing Mediatek device address failed (%ld)", ++ ret); ++ return ret; ++ } ++ kfree_skb(skb); ++ ++ return 0; ++} ++ + static void btusb_mtk_wmt_recv(struct urb *urb) + { + struct hci_dev *hdev = urb->context; +@@ -3900,6 +3917,7 @@ static int btusb_probe(struct usb_interf + hdev->shutdown = btusb_mtk_shutdown; + hdev->manufacturer = 70; + hdev->cmd_timeout = btusb_mtk_cmd_timeout; ++ hdev->set_bdaddr = btusb_set_bdaddr_mtk; + set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); + data->recv_acl = btusb_recv_acl_mtk; + } diff --git a/target/linux/generic/backport-5.15/822-v5.17-Bluetooth-btusb-Fix-application-of-sizeof-to-pointer.patch b/target/linux/generic/backport-5.15/822-v5.17-Bluetooth-btusb-Fix-application-of-sizeof-to-pointer.patch new file mode 100644 index 0000000000..b324cb1aa8 --- /dev/null +++ b/target/linux/generic/backport-5.15/822-v5.17-Bluetooth-btusb-Fix-application-of-sizeof-to-pointer.patch @@ -0,0 +1,29 @@ +From af774a731f7b4c2a90a8476cd44045ba8d1263ba Mon Sep 17 00:00:00 2001 +From: David Yang <davidcomponentone@gmail.com> +Date: Wed, 13 Oct 2021 08:56:33 +0800 +Subject: [PATCH 2/5] Bluetooth: btusb: Fix application of sizeof to pointer + +The coccinelle check report: +"./drivers/bluetooth/btusb.c:2239:36-42: +ERROR: application of sizeof to pointer". +Using the real size to fix it. + +Fixes: 5a87679ffd443 ("Bluetooth: btusb: Support public address configuration for MediaTek Chip.") +Reported-by: Zeal Robot <zealci@zte.com.cn> +Signed-off-by: David Yang <davidcomponentone@gmail.com> +Signed-off-by: Marcel Holtmann <marcel@holtmann.org> +--- + drivers/bluetooth/btusb.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/bluetooth/btusb.c ++++ b/drivers/bluetooth/btusb.c +@@ -2268,7 +2268,7 @@ static int btusb_set_bdaddr_mtk(struct h + struct sk_buff *skb; + long ret; + +- skb = __hci_cmd_sync(hdev, 0xfc1a, sizeof(bdaddr), bdaddr, HCI_INIT_TIMEOUT); ++ skb = __hci_cmd_sync(hdev, 0xfc1a, 6, bdaddr, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + bt_dev_err(hdev, "changing Mediatek device address failed (%ld)", diff --git a/target/linux/generic/backport-5.15/823-v5.18-Bluetooth-btusb-Add-a-new-PID-VID-13d3-3567-for-MT79.patch b/target/linux/generic/backport-5.15/823-v5.18-Bluetooth-btusb-Add-a-new-PID-VID-13d3-3567-for-MT79.patch new file mode 100644 index 0000000000..549005c5a7 --- /dev/null +++ b/target/linux/generic/backport-5.15/823-v5.18-Bluetooth-btusb-Add-a-new-PID-VID-13d3-3567-for-MT79.patch @@ -0,0 +1,70 @@ +From e57186fc02cedff191c469a26cce615371e41740 Mon Sep 17 00:00:00 2001 +From: Yake Yang <yake.yang@mediatek.com> +Date: Wed, 23 Feb 2022 07:55:59 +0800 +Subject: [PATCH 3/5] Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921 + +Add VID 13D3 & PID 3567 for MediaTek MT7921 USB Bluetooth chip. + +The information in /sys/kernel/debug/usb/devices about the Bluetooth +device is listed as the below. + +T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 +D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 +P: Vendor=13d3 ProdID=3567 Rev= 1.00 +S: Manufacturer=MediaTek Inc. +S: Product=Wireless_Device +S: SerialNumber=000000000 +C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA +A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 +I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us +E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms +I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms +I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms +I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms +I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms +I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms +I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) +E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us +E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us +I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) +E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us +E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us + +Co-developed-by: Sean Wang <sean.wang@mediatek.com> +Signed-off-by: Sean Wang <sean.wang@mediatek.com> +Signed-off-by: Yake Yang <yake.yang@mediatek.com> +Signed-off-by: Marcel Holtmann <marcel@holtmann.org> +--- + drivers/bluetooth/btusb.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/bluetooth/btusb.c ++++ b/drivers/bluetooth/btusb.c +@@ -460,6 +460,9 @@ static const struct usb_device_id blackl + { USB_DEVICE(0x13d3, 0x3564), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, ++ { USB_DEVICE(0x13d3, 0x3567), .driver_info = BTUSB_MEDIATEK | ++ BTUSB_WIDEBAND_SPEECH | ++ BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, diff --git a/target/linux/generic/backport-5.15/824-v5.19-Bluetooth-btusb-Add-a-new-PID-VID-0489-e0c8-for-MT79.patch b/target/linux/generic/backport-5.15/824-v5.19-Bluetooth-btusb-Add-a-new-PID-VID-0489-e0c8-for-MT79.patch new file mode 100644 index 0000000000..54e3388860 --- /dev/null +++ b/target/linux/generic/backport-5.15/824-v5.19-Bluetooth-btusb-Add-a-new-PID-VID-0489-e0c8-for-MT79.patch @@ -0,0 +1,68 @@ +From e507366cd1e8e1d4eebe537c08fd142cf0b617fa Mon Sep 17 00:00:00 2001 +From: Sean Wang <sean.wang@mediatek.com> +Date: Thu, 28 Apr 2022 02:38:39 +0800 +Subject: [PATCH 4/5] Bluetooth: btusb: Add a new PID/VID 0489/e0c8 for MT7921 + +Add VID 0489 & PID e0c8 for MediaTek MT7921 USB Bluetooth chip. + +The information in /sys/kernel/debug/usb/devices about the Bluetooth +device is listed as the below. + +T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 +D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 +P: Vendor=0489 ProdID=e0c8 Rev= 1.00 +S: Manufacturer=MediaTek Inc. +S: Product=Wireless_Device +S: SerialNumber=000000000 +C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA +A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 +I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us +E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms +I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms +I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms +I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms +I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms +I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms +I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) +E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us +E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us +I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) +E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us +E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us + +Signed-off-by: Sean Wang <sean.wang@mediatek.com> +Signed-off-by: Marcel Holtmann <marcel@holtmann.org> +--- + drivers/bluetooth/btusb.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/bluetooth/btusb.c ++++ b/drivers/bluetooth/btusb.c +@@ -451,6 +451,9 @@ static const struct usb_device_id blackl + BTUSB_VALID_LE_STATES }, + + /* Additional MediaTek MT7921 Bluetooth devices */ ++ { USB_DEVICE(0x0489, 0xe0c8), .driver_info = BTUSB_MEDIATEK | ++ BTUSB_WIDEBAND_SPEECH | ++ BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, diff --git a/target/linux/generic/pending-5.15/825-Bluetooth-btusb-Add-a-new-VID-PID-0e8d-0608-for-MT79.patch b/target/linux/generic/pending-5.15/825-Bluetooth-btusb-Add-a-new-VID-PID-0e8d-0608-for-MT79.patch new file mode 100644 index 0000000000..4f9dfc2755 --- /dev/null +++ b/target/linux/generic/pending-5.15/825-Bluetooth-btusb-Add-a-new-VID-PID-0e8d-0608-for-MT79.patch @@ -0,0 +1,71 @@ +From ced9d535126a81a85b022cff1e2fd8e0da46c7ae Mon Sep 17 00:00:00 2001 +From: Daniel Golle <daniel@makrotopia.org> +Date: Fri, 9 Sep 2022 18:25:21 +0100 +Subject: [PATCH] Bluetooth: btusb: Add a new VID/PID 0e8d/0608 for MT7921 +To: linux-mediatek@lists.infradead.org, + linux-bluetooth@vger.kernel.org +Cc: Matthias Brugger <matthias.bgg@gmail.com>, + Luiz Augusto von Dentz <luiz.dentz@gmail.com>, + Johan Hedberg <johan.hedberg@gmail.com>, + Marcel Holtmann <marcel@holtmann.org> + +Add a new PID/VID 0e8d/0608 for MT7921K chip found on AMD RZ608 module. + +From /sys/kernel/debug/usb/devices: +T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 +D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 +P: Vendor=0e8d ProdID=0608 Rev= 1.00 +S: Manufacturer=MediaTek Inc. +S: Product=Wireless_Device +S: SerialNumber=000000000 +C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA +A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 +I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us +E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms +I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms +I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms +I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms +I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms +I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb +E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms +E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms +I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) +E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us +E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us +I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) +E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us +E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us + +Signed-off-by: Daniel Golle <daniel@makrotopia.org> +--- + drivers/bluetooth/btusb.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/bluetooth/btusb.c ++++ b/drivers/bluetooth/btusb.c +@@ -469,6 +469,9 @@ static const struct usb_device_id blackl + { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, ++ { USB_DEVICE(0x0e8d, 0x0608), .driver_info = BTUSB_MEDIATEK | ++ BTUSB_WIDEBAND_SPEECH | ++ BTUSB_VALID_LE_STATES }, + + /* MediaTek MT7922A Bluetooth devices */ + { USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK | |