diff options
| -rw-r--r-- | package/ifxmips-dsl-api/Makefile | 5 | ||||
| -rw-r--r-- | package/ifxmips-dsl-api/patches/500-portability.patch | 184 |
2 files changed, 189 insertions, 0 deletions
diff --git a/package/ifxmips-dsl-api/Makefile b/package/ifxmips-dsl-api/Makefile index fdb07214b1..3fc31eda43 100644 --- a/package/ifxmips-dsl-api/Makefile +++ b/package/ifxmips-dsl-api/Makefile @@ -117,6 +117,11 @@ define Build/Prepare $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(FW_BASE_NAME)_b-$(FW_B_VER).tar.gz endef +define Build/Configure + (cd $(PKG_BUILD_DIR); aclocal && autoconf && automake) + $(call Build/Configure/Default) +endef + define Build/Compile cd $(LINUX_DIR); \ ARCH=mips CROSS_COMPILE="$(KERNEL_CROSS)" \ diff --git a/package/ifxmips-dsl-api/patches/500-portability.patch b/package/ifxmips-dsl-api/patches/500-portability.patch new file mode 100644 index 0000000000..cbac514f20 --- /dev/null +++ b/package/ifxmips-dsl-api/patches/500-portability.patch @@ -0,0 +1,184 @@ +--- a/configure.in ++++ b/configure.in +@@ -333,12 +333,12 @@ AC_ARG_ENABLE(ifxos-include, + echo Set the lib_ifxos include path $enableval + AC_SUBST([IFXOS_INCLUDE_PATH],[$enableval]) + else +- echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH ++ echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH + AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH]) + fi + ], + [ +- echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH ++ echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH + AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH]) + ] + ) +@@ -1702,73 +1702,73 @@ dnl Set the configure params for dist ch + AC_SUBST([DISTCHECK_CONFIGURE_PARAMS],[$CONFIGURE_OPTIONS]) + + AC_CONFIG_COMMANDS_PRE([ +-echo -e "------------------------------------------------------------------------" +-echo -e " Configuration for drv_dsl_cpe_api:" +-echo -e " Configure model type: $DSL_CONFIG_MODEL_TYPE" +-echo -e " Source code location: $srcdir" +-echo -e " Compiler: $CC" +-echo -e " Compiler c-flags: $CFLAGS" +-echo -e " Extra compiler c-flags: $EXTRA_DRV_CFLAGS" +-echo -e " Host System Type: $host" +-echo -e " Install path: $prefix" +-echo -e " Linux kernel include path: $KERNEL_INCL_PATH" +-echo -e " Linux kernel build path: $KERNEL_BUILD_PATH" +-echo -e " Linux kernel architecture: $KERNEL_ARCH" +-echo -e " Include IFXOS: $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT" +-echo -e " IFXOS include path: $IFXOS_INCLUDE_PATH" +-echo -e " Driver Include Path $DSL_DRIVER_INCL_PATH" +-echo -e " DSL device: $DSL_DEVICE_NAME" +-echo -e " Max device number: $DSL_DRV_MAX_DEVICE_NUMBER" +-echo -e " Channels per line: $DSL_CHANNELS_PER_LINE" +-echo -e " Build lib (only for kernel 2.6) $DSL_CPE_API_LIBRARY_BUILD_2_6" +-echo -e " DSL data led flash frequency: $DSL_DATA_LED_FLASH_FREQUENCY Hz" +-echo -e " Disable debug prints: $DSL_DEBUG_DISABLE" +-echo -e " Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET" +-echo -e " Preselected max. debug level: $DSL_DBG_MAX_LEVEL_PRE" +-echo -e " Include deprecated functions: $INCLUDE_DEPRECATED" +-echo -e " Include Device Exception Codes: $INCLUDE_DEVICE_EXCEPTION_CODES" +-echo -e " Include FW request support: $INCLUDE_FW_REQUEST_SUPPORT" +-echo -e " Include ADSL trace buffer: $INCLUDE_DSL_CPE_TRACE_BUFFER" +-echo -e " Include ADSL MIB: $INCLUDE_DSL_ADSL_MIB" +-echo -e " Include ADSL LED: $INCLUDE_ADSL_LED" +-echo -e " Include CEOC: $INCLUDE_DSL_CEOC" +-echo -e " Include config get support: $INCLUDE_DSL_CONFIG_GET" +-echo -e " Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE" +-echo -e " Include Resource Statistics: $INCLUDE_DSL_RESOURCE_STATISTICS" +-echo -e " Include Framing Parameters: $INCLUDE_DSL_FRAMING_PARAMETERS" +-echo -e " Include G997 Line Inventory: $INCLUDE_DSL_G997_LINE_INVENTORY" +-echo -e " Include G997 Framing Parameters: $INCLUDE_DSL_G997_FRAMING_PARAMETERS" +-echo -e " Include G997 per tone data: $INCLUDE_DSL_G997_PER_TONE" +-echo -e " Include G997 status: $INCLUDE_DSL_G997_STATUS" +-echo -e " Include G997 alarm: $INCLUDE_DSL_G997_ALARM" +-echo -e " Include DSL Bonding: $INCLUDE_DSL_BONDING" +-echo -e " Include Misc Line Status $INCLUDE_DSL_CPE_MISC_LINE_STATUS" +-echo -e " Include DELT: $INCLUDE_DSL_DELT" +-echo -e " Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA" +-echo -e " Include PM: $INCLUDE_DSL_PM" +-echo -e " Include PM config: $INCLUDE_DSL_CPE_PM_CONFIG" +-echo -e " Include PM total: $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS" +-echo -e " Include PM history: $INCLUDE_DSL_CPE_PM_HISTORY" +-echo -e " Include PM showtime: $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS" +-echo -e " Include PM optional: $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS" +-echo -e " Include PM line: $INCLUDE_DSL_CPE_PM_LINE_COUNTERS" +-echo -e " Include PM line event showtime: $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS" +-echo -e " Include PM channel: $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS" +-echo -e " Include PM channel extended: $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS" +-echo -e " Include PM data path: $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS" +-echo -e " Include PM data path failure: $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS" +-echo -e " Include PM ReTx: $INCLUDE_DSL_CPE_PM_RETX_COUNTERS" +-echo -e " Include PM line threshold: $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS" +-echo -e " Include PM channel threshold: $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS" +-echo -e " Include PM data path threshold: $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS" +-echo -e " Include PM ReTx threshold: $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS" +-echo -e " Include FW memory free support: $INCLUDE_DSL_FIRMWARE_MEMORY_FREE" +-echo -e "----------------------- deprectated ! ----------------------------------" +-echo -e " Include PM line failure: $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS" +-echo -e "" +-echo -e " Settings:" +-echo -e " Configure options: $CONFIGURE_OPTIONS" +-echo -e "------------------------------------------------------------------------" ++echo "------------------------------------------------------------------------" ++echo " Configuration for drv_dsl_cpe_api:" ++echo " Configure model type: $DSL_CONFIG_MODEL_TYPE" ++echo " Source code location: $srcdir" ++echo " Compiler: $CC" ++echo " Compiler c-flags: $CFLAGS" ++echo " Extra compiler c-flags: $EXTRA_DRV_CFLAGS" ++echo " Host System Type: $host" ++echo " Install path: $prefix" ++echo " Linux kernel include path: $KERNEL_INCL_PATH" ++echo " Linux kernel build path: $KERNEL_BUILD_PATH" ++echo " Linux kernel architecture: $KERNEL_ARCH" ++echo " Include IFXOS: $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT" ++echo " IFXOS include path: $IFXOS_INCLUDE_PATH" ++echo " Driver Include Path $DSL_DRIVER_INCL_PATH" ++echo " DSL device: $DSL_DEVICE_NAME" ++echo " Max device number: $DSL_DRV_MAX_DEVICE_NUMBER" ++echo " Channels per line: $DSL_CHANNELS_PER_LINE" ++echo " Build lib (only for kernel 2.6) $DSL_CPE_API_LIBRARY_BUILD_2_6" ++echo " DSL data led flash frequency: $DSL_DATA_LED_FLASH_FREQUENCY Hz" ++echo " Disable debug prints: $DSL_DEBUG_DISABLE" ++echo " Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET" ++echo " Preselected max. debug level: $DSL_DBG_MAX_LEVEL_PRE" ++echo " Include deprecated functions: $INCLUDE_DEPRECATED" ++echo " Include Device Exception Codes: $INCLUDE_DEVICE_EXCEPTION_CODES" ++echo " Include FW request support: $INCLUDE_FW_REQUEST_SUPPORT" ++echo " Include ADSL trace buffer: $INCLUDE_DSL_CPE_TRACE_BUFFER" ++echo " Include ADSL MIB: $INCLUDE_DSL_ADSL_MIB" ++echo " Include ADSL LED: $INCLUDE_ADSL_LED" ++echo " Include CEOC: $INCLUDE_DSL_CEOC" ++echo " Include config get support: $INCLUDE_DSL_CONFIG_GET" ++echo " Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE" ++echo " Include Resource Statistics: $INCLUDE_DSL_RESOURCE_STATISTICS" ++echo " Include Framing Parameters: $INCLUDE_DSL_FRAMING_PARAMETERS" ++echo " Include G997 Line Inventory: $INCLUDE_DSL_G997_LINE_INVENTORY" ++echo " Include G997 Framing Parameters: $INCLUDE_DSL_G997_FRAMING_PARAMETERS" ++echo " Include G997 per tone data: $INCLUDE_DSL_G997_PER_TONE" ++echo " Include G997 status: $INCLUDE_DSL_G997_STATUS" ++echo " Include G997 alarm: $INCLUDE_DSL_G997_ALARM" ++echo " Include DSL Bonding: $INCLUDE_DSL_BONDING" ++echo " Include Misc Line Status $INCLUDE_DSL_CPE_MISC_LINE_STATUS" ++echo " Include DELT: $INCLUDE_DSL_DELT" ++echo " Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA" ++echo " Include PM: $INCLUDE_DSL_PM" ++echo " Include PM config: $INCLUDE_DSL_CPE_PM_CONFIG" ++echo " Include PM total: $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS" ++echo " Include PM history: $INCLUDE_DSL_CPE_PM_HISTORY" ++echo " Include PM showtime: $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS" ++echo " Include PM optional: $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS" ++echo " Include PM line: $INCLUDE_DSL_CPE_PM_LINE_COUNTERS" ++echo " Include PM line event showtime: $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS" ++echo " Include PM channel: $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS" ++echo " Include PM channel extended: $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS" ++echo " Include PM data path: $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS" ++echo " Include PM data path failure: $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS" ++echo " Include PM ReTx: $INCLUDE_DSL_CPE_PM_RETX_COUNTERS" ++echo " Include PM line threshold: $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS" ++echo " Include PM channel threshold: $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS" ++echo " Include PM data path threshold: $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS" ++echo " Include PM ReTx threshold: $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS" ++echo " Include FW memory free support: $INCLUDE_DSL_FIRMWARE_MEMORY_FREE" ++echo "----------------------- deprectated ! ----------------------------------" ++echo " Include PM line failure: $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS" ++echo "" ++echo " Settings:" ++echo " Configure options: $CONFIGURE_OPTIONS" ++echo "------------------------------------------------------------------------" + ]) + + AC_CONFIG_FILES([Makefile src/Makefile]) +--- a/src/Makefile.am ++++ b/src/Makefile.am +@@ -303,7 +303,7 @@ if KERNEL_2_6 + drv_dsl_cpe_api_OBJS = "$(subst .c,.o,$(filter %.c,$(drv_dsl_cpe_api_SOURCES)))" + + drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SOURCES) +- @echo -e "drv_dsl_cpe_api: Making Linux 2.6.x kernel object" ++ @echo "drv_dsl_cpe_api: Making Linux 2.6.x kernel object" + if test ! -e common/drv_dsl_cpe_api.c ; then \ + echo "copy source files (as links only!)"; \ + for f in $(filter %.c,$(drv_dsl_cpe_api_SOURCES)); do \ +@@ -311,10 +311,10 @@ drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SO + cp -s $(addprefix @abs_srcdir@/,$$f) $(PWD)/`dirname $$f`/ ; \ + done \ + fi +- @echo -e "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild +- @echo -e "obj-m := $(subst .ko,.o,$@)" >> $(PWD)/Kbuild +- @echo -e "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)" >> $(PWD)/Kbuild +- @echo -e "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include" >> $(PWD)/Kbuild ++ @echo "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild ++ @echo "obj-m := $(subst .ko,.o,$@)" >> $(PWD)/Kbuild ++ @echo "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)" >> $(PWD)/Kbuild ++ @echo "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include" >> $(PWD)/Kbuild + $(MAKE) ARCH=@KERNEL_ARCH@ -C @KERNEL_BUILD_PATH@ O=@KERNEL_BUILD_PATH@ M=$(PWD) modules + + clean-generic: |