diff options
42 files changed, 0 insertions, 4583 deletions
diff --git a/target/linux/bcm53xx/config-4.14 b/target/linux/bcm53xx/config-4.14 deleted file mode 100644 index 12da0eec9f..0000000000 --- a/target/linux/bcm53xx/config-4.14 +++ /dev/null @@ -1,363 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_BCM=y -CONFIG_ARCH_BCM_5301X=y -CONFIG_ARCH_BCM_53573=y -CONFIG_ARCH_BCM_IPROC=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_SP805_WATCHDOG is not set -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_BCM47XX_WDT=y -CONFIG_BCMA=y -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_DEBUG=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_SFLASH=y -CONFIG_BCM_NET_PHYLIB=y -CONFIG_BCM_NS_THERMAL=y -CONFIG_BGMAC=y -CONFIG_BGMAC_BCMA=y -# CONFIG_BGMAC_PLATFORM is not set -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -CONFIG_BROADCOM_PHY=y -CONFIG_CACHE_L2X0=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_MMIO=y -# CONFIG_CLK_BCM_NS2 is not set -CONFIG_CLK_BCM_NSP=y -# CONFIG_CLK_BCM_SR is not set -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_IPROC=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BCM_5301X=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=0 -CONFIG_DEBUG_UART_PHYS=0x18000300 -CONFIG_DEBUG_UART_VIRT=0xf1000300 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DEBUG_USER=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FRAME_POINTER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_SYSFS=y -# CONFIG_GRO_CELLS is not set -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_HAVE_ARM_TWD=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_LIBFDT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BCM_IPROC=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BUS_MUX=y -# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set -CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_MDIO_DEVICE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_BCM47XXSFLASH=y -CONFIG_MTD_BCM47XX_PARTS=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_BRCMNAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_PARSER_TRX=y -# CONFIG_MTD_PHYSMAP_OF is not set -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NO_BOOTMEM=y -CONFIG_NR_CPUS=2 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCIE_IPROC=y -CONFIG_PCIE_IPROC_BCMA=y -# CONFIG_PCIE_IPROC_PLATFORM is not set -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_BCM_NS_USB2 is not set -# CONFIG_PHY_BCM_NS_USB3 is not set -# CONFIG_PHY_BRCM_SATA is not set -# CONFIG_PHY_NS2_USB_DRD is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_IPROC_GPIO is not set -CONFIG_PINCTRL_NS=y -# CONFIG_PINCTRL_NS2_MUX is not set -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_RATIONAL=y -CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_FSL=y -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -# CONFIG_SPI_BCM53XX is not set -CONFIG_SPI_BCM_QSPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_B53=y -# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set -CONFIG_SWCONFIG_B53_PHY_DRIVER=y -CONFIG_SWCONFIG_B53_PHY_FIXUP=y -CONFIG_SWCONFIG_B53_SRAB_DRIVER=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -# CONFIG_VFP is not set -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/bcm53xx/patches-4.14/030-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch b/target/linux/bcm53xx/patches-4.14/030-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch deleted file mode 100644 index 3148f6c32d..0000000000 --- a/target/linux/bcm53xx/patches-4.14/030-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 2460266f21f140936e627f28f28d1a4f30887ae9 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 6 Oct 2017 10:52:35 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul - XWR-1200 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This info can be used by operating system to setup LED behavior. - -Reported-by: Dan Haab <dhaab@luxul.com> -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -57,7 +57,8 @@ - usb { - label = "bcm53xx:green:usb"; - gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; -- linux,default-trigger = "none"; -+ trigger-sources = <&ohci_port2>, <&ehci_port2>; -+ linux,default-trigger = "usbport"; - }; - - status { diff --git a/target/linux/bcm53xx/patches-4.14/030-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch b/target/linux/bcm53xx/patches-4.14/030-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch deleted file mode 100644 index b0dd01d4e5..0000000000 --- a/target/linux/bcm53xx/patches-4.14/030-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 1f4b0d5596d2e3ea8e953d578ab8444ce860d35d Mon Sep 17 00:00:00 2001 -From: Dan Haab <dhaab@luxul.com> -Date: Mon, 9 Oct 2017 09:46:22 -0600 -Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front -board design. - -Signed-off-by: Dan Haab <dhaab@luxul.com> -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++ - 2 files changed, 64 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-tplink-archer-c9-v1.dtb \ - bcm47094-dlink-dir-885l.dtb \ - bcm47094-linksys-panamera.dtb \ -+ bcm47094-luxul-xbr-4500.dtb \ - bcm47094-luxul-xwr-3100.dtb \ - bcm47094-netgear-r8500.dtb \ - bcm94708.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -0,0 +1,63 @@ -+/* -+ * Copyright (C) 2017 Luxul Inc. -+ * -+ * Licensed under the ISC license. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "Luxul XBR-4500 V1"; -+ -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x18000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ status { -+ label = "bcm53xx:green:status"; -+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "timer"; -+ }; -+ -+ usb3 { -+ label = "bcm53xx:green:usb3"; -+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; -+ trigger-sources = <&ohci_port1>, <&ehci_port1>, -+ <&xhci_port1>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&usb3 { -+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; -+}; -+ -+&spi_nor { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/030-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch b/target/linux/bcm53xx/patches-4.14/030-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch deleted file mode 100644 index 76bc739dde..0000000000 --- a/target/linux/bcm53xx/patches-4.14/030-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001 -From: Dan Haab <dhaab@luxul.com> -Date: Mon, 9 Oct 2017 09:46:23 -0600 -Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports -board design. - -Signed-off-by: Dan Haab <dhaab@luxul.com> -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++ - 2 files changed, 64 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-tplink-archer-c9-v1.dtb \ - bcm47094-dlink-dir-885l.dtb \ - bcm47094-linksys-panamera.dtb \ -+ bcm47094-luxul-abr-4500.dtb \ - bcm47094-luxul-xbr-4500.dtb \ - bcm47094-luxul-xwr-3100.dtb \ - bcm47094-netgear-r8500.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -0,0 +1,63 @@ -+/* -+ * Copyright (C) 2017 Luxul Inc. -+ * -+ * Licensed under the ISC license. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "Luxul ABR-4500 V1"; -+ -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x18000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ status { -+ label = "bcm53xx:green:status"; -+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "timer"; -+ }; -+ -+ usb3 { -+ label = "bcm53xx:green:usb3"; -+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ohci_port1>, <&ehci_port1>, -+ <&xhci_port1>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&usb3 { -+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; -+}; -+ -+&spi_nor { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/030-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch b/target/linux/bcm53xx/patches-4.14/030-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch deleted file mode 100644 index 5cb894c361..0000000000 --- a/target/linux/bcm53xx/patches-4.14/030-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch +++ /dev/null @@ -1,120 +0,0 @@ -From 0aa052ce1c3340850a7e5980b6d24b3ea5779591 Mon Sep 17 00:00:00 2001 -From: Dan Haab <dhaab@luxul.com> -Date: Mon, 9 Oct 2017 09:46:59 -0600 -Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-810 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is BCM53573 WiSoC based access point with an extra BCM43217 chipset -used for 2.4 GHz. - -Signed-off-by: Dan Haab <dhaab@luxul.com> -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 ++++++++++++++++++++++++++++ - 2 files changed, 88 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm953012hr.dtb \ - bcm953012k.dtb - dtb-$(CONFIG_ARCH_BCM_53573) += \ -+ bcm47189-luxul-xap-810.dtb \ - bcm47189-tenda-ac9.dtb \ - bcm947189acdbmr.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -0,0 +1,87 @@ -+/* -+ * Copyright 2017 Luxul Inc. -+ * -+ * Licensed under the ISC license. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm53573.dtsi" -+ -+/ { -+ compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573"; -+ model = "Luxul XAP-810 V1"; -+ -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ 5ghz { -+ label = "bcm53xx:blue:5ghz"; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ system { -+ label = "bcm53xx:green:system"; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "timer"; -+ }; -+ }; -+ -+ pcie0_leds { -+ compatible = "gpio-leds"; -+ -+ 2ghz { -+ label = "bcm53xx:blue:2ghz"; -+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&pcie0 { -+ ranges = <0x00000000 0 0 0 0 0x00100000>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bridge@0,0,0 { -+ reg = <0x0000 0 0 0 0>; -+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ wifi@0,1,0 { -+ reg = <0x0000 0 0 0 0>; -+ ranges = <0x00000000 0 0 0 0x00100000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ pcie0_chipcommon: chipcommon@0 { -+ reg = <0 0x1000>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/030-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch b/target/linux/bcm53xx/patches-4.14/030-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch deleted file mode 100644 index 9d43dd58d0..0000000000 --- a/target/linux/bcm53xx/patches-4.14/030-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 7030ea600d560026b91726f2eb79c856b813afa9 Mon Sep 17 00:00:00 2001 -From: Dan Haab <dhaab@luxul.com> -Date: Mon, 9 Oct 2017 09:47:00 -0600 -Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-1440 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is BCM53573 WiSoC based outdoor access point with an extra BCM43217 -chipset used for 2.4 GHz. - -Signed-off-by: Dan Haab <dhaab@luxul.com> -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++++++++++++++++++++++++++ - 2 files changed, 51 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm953012hr.dtb \ - bcm953012k.dtb - dtb-$(CONFIG_ARCH_BCM_53573) += \ -+ bcm47189-luxul-xap-1440.dtb \ - bcm47189-luxul-xap-810.dtb \ - bcm47189-tenda-ac9.dtb \ - bcm947189acdbmr.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -0,0 +1,50 @@ -+/* -+ * Copyright 2017 Luxul Inc. -+ * -+ * Licensed under the ISC license. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm53573.dtsi" -+ -+/ { -+ compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573"; -+ model = "Luxul XAP-1440 V1"; -+ -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ wlan { -+ label = "bcm53xx:blue:wlan"; -+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ system { -+ label = "bcm53xx:green:system"; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "timer"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/031-v4.17-0001-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch b/target/linux/bcm53xx/patches-4.14/031-v4.17-0001-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch deleted file mode 100644 index 043d38b832..0000000000 --- a/target/linux/bcm53xx/patches-4.14/031-v4.17-0001-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 811ae58e76da88106f6d28159d4ea7b163dfaa48 Mon Sep 17 00:00:00 2001 -From: INAGAKI Hiroshi <musashino.open@gmail.com> -Date: Wed, 7 Mar 2018 20:33:56 +0900 -Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the -dts and cannot configure these LEDs. -I Added missing LED definitions for WZR-900DHP. - -Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> -Reviewed-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++ - 1 file changed, 68 insertions(+) - ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -35,6 +35,74 @@ - 0x88000000 0x08000000>; - }; - -+ spi { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&chipcommon 7 0>; -+ gpio-mosi = <&chipcommon 4 0>; -+ cs-gpios = <&chipcommon 6 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hc595: gpio_spi@0 { -+ compatible = "fairchild,74hc595"; -+ reg = <0>; -+ registers-number = <1>; -+ spi-max-frequency = <100000>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ usb { -+ label = "bcm53xx:green:usb"; -+ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power0 { -+ label = "bcm53xx:green:power"; -+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ power1 { -+ label = "bcm53xx:red:power"; -+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ router0 { -+ label = "bcm53xx:green:router"; -+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ router1 { -+ label = "bcm53xx:amber:router"; -+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan { -+ label = "bcm53xx:green:wan"; -+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ wireless0 { -+ label = "bcm53xx:green:wireless"; -+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wireless1 { -+ label = "bcm53xx:amber:wireless"; -+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; diff --git a/target/linux/bcm53xx/patches-4.14/032-v4.18-0001-ARM-dts-BCM5301X-Switch-Luxul-XWC-1000-to-the-new-fi.patch b/target/linux/bcm53xx/patches-4.14/032-v4.18-0001-ARM-dts-BCM5301X-Switch-Luxul-XWC-1000-to-the-new-fi.patch deleted file mode 100644 index e2fe0be909..0000000000 --- a/target/linux/bcm53xx/patches-4.14/032-v4.18-0001-ARM-dts-BCM5301X-Switch-Luxul-XWC-1000-to-the-new-fi.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 0c0d1c90ddc44df70401b7cfff178c41b2f83ffa Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 4 Apr 2018 15:14:21 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed - partitions syntax -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This new syntax is slightly better designed & uses "compatible" string. -For details see Documentation/devicetree/bindings/mtd/partition.txt . - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -26,9 +26,15 @@ - - nand: nand@18028000 { - nandcs@0 { -- partition@0 { -- label = "ubi"; -- reg = <0x00000000 0x08000000>; -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "ubi"; -+ reg = <0x00000000 0x08000000>; -+ }; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-4.14/032-v4.18-0002-ARM-dts-BCM5301X-Relicense-most-DTS-files-to-the-GPL.patch b/target/linux/bcm53xx/patches-4.14/032-v4.18-0002-ARM-dts-BCM5301X-Relicense-most-DTS-files-to-the-GPL.patch deleted file mode 100644 index 6599520b92..0000000000 --- a/target/linux/bcm53xx/patches-4.14/032-v4.18-0002-ARM-dts-BCM5301X-Relicense-most-DTS-files-to-the-GPL.patch +++ /dev/null @@ -1,440 +0,0 @@ -From 2b3db67ce4bc4d1d8556e87a17df7765da8dbdc5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 2 May 2018 16:11:02 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+ - / MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -These files were created and ever touched by a group of three people -only: Dan, Hauke and me. They were licensed under GNU/GPL or ISC. - -Introducing and discussing SPDX-License-Identifier resulted in a -conclusion that ISC is a not recommended license (see also a -license-rules.rst). Moveover an old e-mail from Alan Cox was pointed -which explained that dual licensing is a safer solution than depending -on a common compatibility belief. - -This commit switches most of BCM5301X DTS files to dual licensing using: -1) GPL 2.0+ to make sure they are compatible with Linux kernel -2) MIT to allow sharing with more permissive projects -Both licenses belong to the preferred ones (see LICENSES/preferred/). - -An attempt to relicense remaining files will be made separately and will -require approve from more/other developers. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -Acked-by: Hauke Mehrtens <hauke@hauke-m.de> -Acked-by: Dan Haab <dan.haab@luxul.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 13 +------------ - arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 13 +------------ - arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 3 +-- - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 3 +-- - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 3 +-- - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 13 +------------ - arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 +-- - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 13 +------------ - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 13 +------------ - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 +-- - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 +-- - arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 3 +-- - arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 3 +-- - arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 13 +------------ - arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 3 +-- - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 13 +------------ - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 3 +-- - arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 3 +-- - arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 3 +-- - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +-- - arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +-- - arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi | 3 +-- - arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 3 +-- - arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 3 +-- - arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 3 +-- - 25 files changed, 25 insertions(+), 120 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Asus RT-AC56U - * - * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Asus RT-AC68U - * - * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright 2016 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -1,10 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Luxul XWC-1000 - * - * Copyright 2014 Luxul Inc. -- * -- * Licensed under the GNU/GPL. See COPYING for details. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Netgear R6300 V2 - * - * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -1,10 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X arm platform code. - * DTS for SmartRG SR400ac - * - * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -- * -- * Licensed under the GNU/GPL. See COPYING for details. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Asus RT-N18U - * - * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Buffalo WZR-600DHP2 - * - * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright 2017 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright 2017 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Netgear R7000 - * - * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for D-Link DIR-885L - * - * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2017 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2017 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright 2016 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi -+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi -@@ -1,9 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom Northstar NAND. - * - * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com> -- * -- * Licensed under the ISC license. - */ - - #include "bcm5301x-nand-cs0.dtsi" ---- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi -+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright 2016 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - #include "bcm5301x-nand-cs0.dtsi" ---- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi -+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi -@@ -1,3 +1,4 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X Nand chip defaults. - * -@@ -5,8 +6,6 @@ - * and uses 8 bit ECC. - * - * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> -- * -- * Licensed under the GNU/GPL. See COPYING for details. - */ - - #include "bcm5301x-nand-cs0.dtsi" ---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi -+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi -@@ -1,9 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom Northstar NAND. - * - * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> -- * -- * Licensed under the GNU/GPL. See COPYING for details. - */ - - / { diff --git a/target/linux/bcm53xx/patches-4.14/032-v4.18-0003-ARM-dts-BCM5301X-Relicense-Buffalo-files-to-the-GPL-.patch b/target/linux/bcm53xx/patches-4.14/032-v4.18-0003-ARM-dts-BCM5301X-Relicense-Buffalo-files-to-the-GPL-.patch deleted file mode 100644 index cc7ff8552a..0000000000 --- a/target/linux/bcm53xx/patches-4.14/032-v4.18-0003-ARM-dts-BCM5301X-Relicense-Buffalo-files-to-the-GPL-.patch +++ /dev/null @@ -1,79 +0,0 @@ -From fd0ab539d185a828f2071ee5f311bf101c7fea08 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 4 May 2018 11:54:45 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ / - MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches licensing used by other BCM5301X files and is preferred as: -1) GPL 2.0+ makes is clearly compatible with Linux kernel -2) MIT is also permissive but preferred over ISC - -These files were created and ever touched by a group of four people -only: Felix, INAGAKI, Hauke and me. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Acked-by: Felix Fietkau <nbd@nbd.name> -Acked-by: INAGAKI Hiroshi <musashino.open@gmail.com> -Acked-by: Hauke Mehrtens <hauke@hauke-m.de> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 +-- - arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 13 +------------ - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 +-- - 3 files changed, 3 insertions(+), 16 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -1,10 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Buffalo WZR-1750DHP - * - * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com> -- * -- * Licensed under the GNU/GPL. See COPYING for details. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Buffalo WZR-900DHP - * - * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -1,10 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Buffalo WXR-1900DHP - * - * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org> -- * -- * Licensed under the GNU/GPL. See COPYING for details. - */ - - /dts-v1/; diff --git a/target/linux/bcm53xx/patches-4.14/032-v4.18-0004-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWR-3150-V1.patch b/target/linux/bcm53xx/patches-4.14/032-v4.18-0004-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWR-3150-V1.patch deleted file mode 100644 index 4285a59a6d..0000000000 --- a/target/linux/bcm53xx/patches-4.14/032-v4.18-0004-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWR-3150-V1.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 2e2105a1578172eaf61e3b59a2c10c4fe04c21b9 Mon Sep 17 00:00:00 2001 -From: Dan Haab <riproute@gmail.com> -Date: Fri, 4 May 2018 10:08:43 -0600 -Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Luxul XWR-3150 is a wireless router similar to the XWR-3100 except: -1) It has more RAM -2) Its NAND controller in running in BCH8 mode -3) LAN ports LEDs are hardware controlled - -Signed-off-by: Dan Haab <dan.haab@luxul.com> -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 ++++++++++++++++++++++++ - 2 files changed, 78 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47094-luxul-abr-4500.dtb \ - bcm47094-luxul-xbr-4500.dtb \ - bcm47094-luxul-xwr-3100.dtb \ -+ bcm47094-luxul-xwr-3150-v1.dtb \ - bcm47094-netgear-r8500.dtb \ - bcm94708.dtb \ - bcm94709.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -0,0 +1,77 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright 2018 Luxul Inc. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47094.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "Luxul XWR-3150 V1"; -+ -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x18000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power { -+ label = "bcm53xx:green:power"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ usb3 { -+ label = "bcm53xx:green:usb3"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ohci_port1>, <&ehci_port1>, -+ <&xhci_port1>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ status { -+ label = "bcm53xx:green:status"; -+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "timer"; -+ }; -+ -+ 2ghz { -+ label = "bcm53xx:green:2ghz"; -+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; -+ }; -+ -+ 5ghz { -+ label = "bcm53xx:green:5ghz"; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&usb3 { -+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; -+}; -+ -+&spi_nor { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/032-v4.18-0005-ARM-dts-BCM5301X-Add-DT-for-Luxul-XAP-1610.patch b/target/linux/bcm53xx/patches-4.14/032-v4.18-0005-ARM-dts-BCM5301X-Add-DT-for-Luxul-XAP-1610.patch deleted file mode 100644 index a6102857c3..0000000000 --- a/target/linux/bcm53xx/patches-4.14/032-v4.18-0005-ARM-dts-BCM5301X-Add-DT-for-Luxul-XAP-1610.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 6054cb5788072e214af582c42d9bd8c5ffa6e288 Mon Sep 17 00:00:00 2001 -From: Dan Haab <riproute@gmail.com> -Date: Fri, 4 May 2018 10:08:44 -0600 -Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's an access point based on BCM47094 SoC with two BCM4366E wireless -chipsets. - -Signed-off-by: Dan Haab <dan.haab@luxul.com> -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 57 +++++++++++++++++++++++++++ - 2 files changed, 58 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47094-dlink-dir-885l.dtb \ - bcm47094-linksys-panamera.dtb \ - bcm47094-luxul-abr-4500.dtb \ -+ bcm47094-luxul-xap-1610.dtb \ - bcm47094-luxul-xbr-4500.dtb \ - bcm47094-luxul-xwr-3100.dtb \ - bcm47094-luxul-xwr-3150-v1.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -0,0 +1,57 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright 2018 Luxul Inc. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47094.dtsi" -+ -+/ { -+ compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "Luxul XAP-1610 V1"; -+ -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ status { -+ label = "bcm53xx:green:status"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "timer"; -+ }; -+ -+ 2ghz { -+ label = "bcm53xx:blue:2ghz"; -+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; -+ }; -+ -+ 5ghz { -+ label = "bcm53xx:blue:5ghz"; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&spi_nor { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/032-v4.18-0006-ARM-dts-BCM5301X-Relicense-Asus-RT-AC87U-file-to-the.patch b/target/linux/bcm53xx/patches-4.14/032-v4.18-0006-ARM-dts-BCM5301X-Relicense-Asus-RT-AC87U-file-to-the.patch deleted file mode 100644 index f774bc6b82..0000000000 --- a/target/linux/bcm53xx/patches-4.14/032-v4.18-0006-ARM-dts-BCM5301X-Relicense-Asus-RT-AC87U-file-to-the.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 9c281b5e129961b9940a27f8da24dddd1c0eba87 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 4 May 2018 12:03:24 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL - 2.0+ / MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches licensing used by other BCM5301X files and is preferred as: -1) GPL 2.0+ makes is clearly compatible with Linux kernel -2) MIT is also permissive but preferred over ISC - -This file were created and ever touched by a group of three people only: -Álvaro, Hauke and me. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Acked-by: Hauke Mehrtens <hauke@hauke-m.de> -Acked-by: Álvaro Fernández Rojas <noltari@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 13 +------------ - 1 file changed, 1 insertion(+), 12 deletions(-) - ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for Asus RT-AC87U - * - * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - /dts-v1/; diff --git a/target/linux/bcm53xx/patches-4.14/032-v4.18-0007-ARM-dts-BCM5301X-Switch-D-Link-DIR-885L-to-the-new-p.patch b/target/linux/bcm53xx/patches-4.14/032-v4.18-0007-ARM-dts-BCM5301X-Switch-D-Link-DIR-885L-to-the-new-p.patch deleted file mode 100644 index e397ddd0b2..0000000000 --- a/target/linux/bcm53xx/patches-4.14/032-v4.18-0007-ARM-dts-BCM5301X-Switch-D-Link-DIR-885L-to-the-new-p.patch +++ /dev/null @@ -1,39 +0,0 @@ -From a05f1e36a57d02374a203719abc5bf2e8c51e125 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 10 May 2018 23:20:00 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new - partitions syntax -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This new syntax is slightly better designed & uses "compatible" string. -For details see Documentation/devicetree/bindings/mtd/partition.txt . - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -26,9 +26,15 @@ - - nand: nand@18028000 { - nandcs@0 { -- partition@0 { -- label = "firmware"; -- reg = <0x00000000 0x08000000>; -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "firmware"; -+ reg = <0x00000000 0x08000000>; -+ }; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-4.14/033-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch b/target/linux/bcm53xx/patches-4.14/033-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch deleted file mode 100644 index 226109c09c..0000000000 --- a/target/linux/bcm53xx/patches-4.14/033-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch +++ /dev/null @@ -1,456 +0,0 @@ -From 37f6130ec39fe14e923d472746a51e6f06f761b7 Mon Sep 17 00:00:00 2001 -From: Vivek Unune <npcomplete13@gmail.com> -Date: Mon, 9 Apr 2018 18:31:53 -0400 -Subject: [PATCH] ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Currently, the USB 3.0 PHY in bcm5301x.dtsi uses platform driver which -requires register range "ccb-mii" <0x18003000 0x1000>. This range -overlaps with MDIO cmd and param registers (<0x18003000 0x8>). -Essentially, the platform driver partly acts like a MDIO bus driver, -hence to use of this register range. - -In some Northstar devices like Linksys EA9500, secondary switch is -connected via external MDIO. The only way to access and configure the -external switch is via MDIO bus. When we enable the MDIO bus in it's -current state, the MDIO bus and any child buses fail to register because -of the register range overlap. - -On Northstar, the USB 3.0 PHY is connected at address 0x10 on the -internal MDIO bus. This change moves the usb3_phy node and makes it a -child node of internal MDIO bus. - -Thanks to Rafał Miłecki's commit af850e14a7ae ("phy: bcm-ns-usb3: add -MDIO driver using proper bus layer") the same USB 3.0 platform driver -can now act as USB 3.0 PHY MDIO driver. - -Tested on Linksys Panamera (EA9500) - -Signed-off-by: Vivek Unune <npcomplete13@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 +++ - arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 +++ - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 +++ - arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 4 +++ - arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 +++ - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 +++ - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 +++ - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 +++ - arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 +++ - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 +++ - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 +++ - arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 +++ - arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 4 +++ - arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 4 +++ - arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 +++ - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 +++ - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 +++ - arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 4 +++ - arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 +++ - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 +++ - arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 +++ - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 +++ - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 4 +++ - arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +++ - arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +++ - arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 +++ - arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 +++ - arch/arm/boot/dts/bcm47094.dtsi | 7 +++-- - arch/arm/boot/dts/bcm5301x.dtsi | 35 +++++++++++++++++----- - arch/arm/boot/dts/bcm94708.dts | 4 +++ - arch/arm/boot/dts/bcm94709.dts | 4 +++ - arch/arm/boot/dts/bcm953012er.dts | 4 +++ - arch/arm/boot/dts/bcm953012hr.dts | 4 +++ - arch/arm/boot/dts/bcm953012k.dts | 4 +++ - 34 files changed, 159 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -90,3 +90,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -80,3 +80,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -146,3 +146,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts -@@ -38,3 +38,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts -@@ -57,3 +57,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -64,3 +64,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -91,3 +91,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -83,3 +83,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -158,3 +158,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -74,3 +74,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -118,3 +118,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -104,3 +104,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts -@@ -57,3 +57,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts -@@ -105,3 +105,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -99,3 +99,7 @@ - &usb2 { - vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -62,3 +62,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -127,3 +127,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -@@ -39,3 +39,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -101,3 +101,7 @@ - &usb3 { - vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -182,3 +182,7 @@ - &usb3 { - vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -104,3 +104,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -115,3 +115,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -33,3 +33,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -60,3 +60,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -60,3 +60,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts -@@ -100,3 +100,7 @@ - &spi_nor { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts -@@ -91,3 +91,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47094.dtsi -+++ b/arch/arm/boot/dts/bcm47094.dtsi -@@ -7,9 +7,10 @@ - #include "bcm4708.dtsi" - - / { -- usb3_phy: usb3-phy { -- compatible = "brcm,ns-bx-usb3-phy"; -- }; -+}; -+ -+&usb3_phy { -+ compatible = "brcm,ns-bx-usb3-phy"; - }; - - &uart0 { ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -154,13 +154,6 @@ - clock-names = "phy-ref-clk"; - }; - -- usb3_phy: usb3-phy { -- compatible = "brcm,ns-ax-usb3-phy"; -- reg = <0x18105000 0x1000>, <0x18003000 0x1000>; -- reg-names = "dmp", "ccb-mii"; -- #phy-cells = <0>; -- }; -- - axi@18000000 { - compatible = "brcm,bus-axi"; - reg = <0x18000000 0x1000>; -@@ -359,7 +352,33 @@ - reg = <0x18003000 0x8>; - #size-cells = <1>; - #address-cells = <0>; -- status = "disabled"; -+ }; -+ -+ mdio-bus-mux { -+ compatible = "mdio-mux-mmioreg"; -+ mdio-parent-bus = <&mdio>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x18003000 0x4>; -+ mux-mask = <0x200>; -+ -+ mdio@0 { -+ reg = <0x0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ usb3_phy: usb3-phy@10 { -+ compatible = "brcm,ns-ax-usb3-phy"; -+ reg = <0x10>; -+ usb3-dmp-syscon = <&usb3_dmp>; -+ #phy-cells = <0>; -+ status = "disabled"; -+ }; -+ }; -+ }; -+ -+ usb3_dmp: syscon@18105000 { -+ reg = <0x18105000 0x1000>; - }; - - i2c0: i2c@18009000 { ---- a/arch/arm/boot/dts/bcm94708.dts -+++ b/arch/arm/boot/dts/bcm94708.dts -@@ -42,3 +42,7 @@ - reg = <0x00000000 0x08000000>; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm94709.dts -+++ b/arch/arm/boot/dts/bcm94709.dts -@@ -42,3 +42,7 @@ - reg = <0x00000000 0x08000000>; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm953012er.dts -+++ b/arch/arm/boot/dts/bcm953012er.dts -@@ -90,3 +90,7 @@ - }; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm953012hr.dts -+++ b/arch/arm/boot/dts/bcm953012hr.dts -@@ -95,3 +95,7 @@ - reg = <0x00700000 0x00900000>; - }; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm953012k.dts -+++ b/arch/arm/boot/dts/bcm953012k.dts -@@ -113,3 +113,7 @@ - &uart1 { - status = "okay"; - }; -+ -+&usb3_phy { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/033-v4.19-0002-ARM-dts-BCM53573-Add-architected-timer.patch b/target/linux/bcm53xx/patches-4.14/033-v4.19-0002-ARM-dts-BCM53573-Add-architected-timer.patch deleted file mode 100644 index f1b301ca27..0000000000 --- a/target/linux/bcm53xx/patches-4.14/033-v4.19-0002-ARM-dts-BCM53573-Add-architected-timer.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a21e7548438f3a8f59f9b9f3a8bc973613d3726a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 14 Jun 2018 18:41:47 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Add architected timer -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's a standard ARM architected timer that was simply missed when -initially adding this .dtsi file. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm53573.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -48,6 +48,14 @@ - }; - }; - -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, -+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, -+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, -+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; -+ }; -+ - clocks { - #address-cells = <1>; - #size-cells = <1>; diff --git a/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch b/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch deleted file mode 100644 index 701605a973..0000000000 --- a/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch +++ /dev/null @@ -1,269 +0,0 @@ -From 2bebdfcdcd0feb58d5df419532a2cedc78a336d7 Mon Sep 17 00:00:00 2001 -From: Vivek Unune <npcomplete13@gmail.com> -Date: Mon, 18 Jun 2018 13:41:59 -0400 -Subject: [PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Hardware Info -------------- - -Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz -Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125 -DDR3 RAM - 256 MB -Flash - 128 MB (Toshiba TC58BVG0S3HTA00) -2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC -Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4) -5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC -Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch -Ports - 8 Ports, 1 WAN Ports -Antennas - 8 Antennas -Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1 - -Tested with OpenWrt built with DSA driver and Kernel v4.14 - -Signed-off-by: Vivek Unune <npcomplete13@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 229 ++++++++++++++++++++++++ - 1 file changed, 229 insertions(+) - ---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts -@@ -31,6 +31,235 @@ - linux,code = <KEY_WPS_BUTTON>; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; - }; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; -+ }; -+ -+ reset { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ wps { -+ label = "bcm53xx:white:wps"; -+ gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb2 { -+ label = "bcm53xx:green:usb2"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ohci_port2>, <&ehci_port2>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ usb3 { -+ label = "bcm53xx:green:usb3"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ trigger-sources = <&ohci_port1>, <&ehci_port1>, -+ <&xhci_port1>; -+ linux,default-trigger = "usbport"; -+ }; -+ -+ power { -+ label = "bcm53xx:white:power"; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wifi-disabled { -+ label = "bcm53xx:amber:wifi-disabled"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wifi-enabled { -+ label = "bcm53xx:white:wifi-enabled"; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar1 { -+ label = "bcm53xx:white:bluebar1"; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar2 { -+ label = "bcm53xx:white:bluebar2"; -+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar3 { -+ label = "bcm53xx:white:bluebar3"; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; -+ }; -+ -+ bluebar4 { -+ label = "bcm53xx:white:bluebar4"; -+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar5 { -+ label = "bcm53xx:white:bluebar5"; -+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar6 { -+ label = "bcm53xx:white:bluebar6"; -+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar7 { -+ label = "bcm53xx:white:bluebar7"; -+ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ bluebar8 { -+ label = "bcm53xx:white:bluebar8"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ mdio-bus-mux { -+ /* BIT(9) = 1 => external mdio */ -+ mdio_ext: mdio@200 { -+ reg = <0x200>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+ -+ mdio-mii-mux { -+ compatible = "mdio-mux-mmioreg"; -+ mdio-parent-bus = <&mdio_ext>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x1800c1c0 0x4>; -+ -+ /* BIT(6) = mdc, BIT(7) = mdio */ -+ mux-mask = <0xc0>; -+ -+ mdio-mii@0 { -+ /* Enable MII function */ -+ reg = <0x0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ switch@0 { -+ compatible = "brcm,bcm53125"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; -+ reset-names = "robo_reset"; -+ reg = <0>; -+ dsa,member = <1 0>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan5"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan6"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "lan3"; -+ }; -+ -+ sw1_p8: port@8 { -+ reg = <8>; -+ ethernet = <&sw0_p0>; -+ label = "cpu"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&usb2 { -+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; -+}; -+ -+&usb3 { -+ vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>; -+}; -+ -+&srab { -+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; -+ status = "okay"; -+ dsa,member = <0 0>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan7"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan4"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan8"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "wan"; -+ }; -+ -+ port@8 { -+ reg = <8>; -+ ethernet = <&gmac2>; -+ label = "cpu"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ sw0_p0: port@0 { -+ reg = <0>; -+ label = "extsw"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; - }; - }; - diff --git a/target/linux/bcm53xx/patches-4.14/034-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch b/target/linux/bcm53xx/patches-4.14/034-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch deleted file mode 100644 index e6e2522f08..0000000000 --- a/target/linux/bcm53xx/patches-4.14/034-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch +++ /dev/null @@ -1,167 +0,0 @@ -From b0465fdfdd7e7c1afe2fae1cb36b94e1ce89732e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Sat, 28 Jul 2018 14:13:57 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Specify flash partitions -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Most devices use Broadcom standard partitions which allows them to be -described with the "brcm,bcm947xx-cfe-partitions". Exceptions are: -1) TP-LINK devices which use "os-image" partition with TRX containing - kernel only + separated rootfs partition. -2) Asus RT-AC87U with custom "asus" partition. - -This commit also removes undocumented and unsupported linux,part-probe -binding which got accidentally upstreamed while describing SPI -controller. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 28 +++++++++++++++++++ - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 31 ++++++++++++++++++++++ - arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 28 +++++++++++++++++++ - arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 4 +++ - arch/arm/boot/dts/bcm5301x.dtsi | 5 +++- - 5 files changed, 95 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -94,6 +94,34 @@ - - &spi_nor { - status = "okay"; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ boot@0 { -+ label = "boot"; -+ reg = <0x000000 0x040000>; -+ read-only; -+ }; -+ -+ os-image@100000 { -+ label = "os-image"; -+ reg = <0x040000 0x200000>; -+ compatible = "brcm,trx"; -+ }; -+ -+ rootfs@240000 { -+ label = "rootfs"; -+ reg = <0x240000 0xc00000>; -+ }; -+ -+ nvram@ff0000 { -+ label = "nvram"; -+ reg = <0xff0000 0x010000>; -+ }; -+ }; - }; - - &usb2 { ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -66,3 +66,34 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&nandcs { -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ boot@0 { -+ label = "boot"; -+ reg = <0x00000000 0x00080000>; -+ read-only; -+ }; -+ -+ nvram@80000 { -+ label = "nvram"; -+ reg = <0x00080000 0x00180000>; -+ }; -+ -+ firmware@200000 { -+ label = "firmware"; -+ reg = <0x00200000 0x07cc0000>; -+ compatible = "brcm,trx"; -+ }; -+ -+ asus@7ec0000 { -+ label = "asus"; -+ reg = <0x07ec0000 0x00140000>; -+ read-only; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -103,6 +103,34 @@ - - &spi_nor { - status = "okay"; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ boot@0 { -+ label = "boot"; -+ reg = <0x000000 0x040000>; -+ read-only; -+ }; -+ -+ os-image@100000 { -+ label = "os-image"; -+ reg = <0x040000 0x200000>; -+ compatible = "brcm,trx"; -+ }; -+ -+ rootfs@240000 { -+ label = "rootfs"; -+ reg = <0x240000 0xc00000>; -+ }; -+ -+ nvram@ff0000 { -+ label = "nvram"; -+ reg = <0xff0000 0x010000>; -+ }; -+ }; - }; - - &usb3_phy { ---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi -+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi -@@ -12,6 +12,10 @@ - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; -+ -+ partitions { -+ compatible = "brcm,bcm947xx-cfe-partitions"; -+ }; - }; - }; - }; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -475,8 +475,11 @@ - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; -- linux,part-probe = "ofpart", "bcm47xxpart"; - status = "disabled"; -+ -+ partitions { -+ compatible = "brcm,bcm947xx-cfe-partitions"; -+ }; - }; - }; - diff --git a/target/linux/bcm53xx/patches-4.14/035-v4.21-0001-ARM-dts-BCM5301X-Relicense-BCM47081-BCM4709-files-to.patch b/target/linux/bcm53xx/patches-4.14/035-v4.21-0001-ARM-dts-BCM5301X-Relicense-BCM47081-BCM4709-files-to.patch deleted file mode 100644 index 2dc6b2c23c..0000000000 --- a/target/linux/bcm53xx/patches-4.14/035-v4.21-0001-ARM-dts-BCM5301X-Relicense-BCM47081-BCM4709-files-to.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 26ff86f7794b9466481ccf29ac79925d327f106d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 20 Sep 2018 13:18:47 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the - GPL 2.0+ / MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches licensing used by other BCM5301X files and is preferred as: -1) GPL 2.0+ makes it clearly compatible with Linux kernel -2) MIT is also permissive but preferred over ISC - -Both files were fully developed by me. Commits touching them were signed -by Florian and Hauke due to submitting process only. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47081.dtsi | 13 +------------ - arch/arm/boot/dts/bcm4709.dtsi | 3 +-- - 2 files changed, 2 insertions(+), 14 deletions(-) - ---- a/arch/arm/boot/dts/bcm47081.dtsi -+++ b/arch/arm/boot/dts/bcm47081.dtsi -@@ -1,20 +1,9 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Broadcom BCM470X / BCM5301X ARM platform code. - * DTS for BCM47081 SoC. - * - * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com> -- * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -- * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH -- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY -- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, -- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM -- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE -- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -- * PERFORMANCE OF THIS SOFTWARE. - */ - - #include "bcm5301x.dtsi" ---- a/arch/arm/boot/dts/bcm4709.dtsi -+++ b/arch/arm/boot/dts/bcm4709.dtsi -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - #include "bcm4708.dtsi" diff --git a/target/linux/bcm53xx/patches-4.14/035-v4.21-0002-ARM-dts-BCM5301X-Relicense-BCM47094-file-to-the-GPL-.patch b/target/linux/bcm53xx/patches-4.14/035-v4.21-0002-ARM-dts-BCM5301X-Relicense-BCM47094-file-to-the-GPL-.patch deleted file mode 100644 index 86c6b0ae41..0000000000 --- a/target/linux/bcm53xx/patches-4.14/035-v4.21-0002-ARM-dts-BCM5301X-Relicense-BCM47094-file-to-the-GPL-.patch +++ /dev/null @@ -1,33 +0,0 @@ -From d10967344375026ca8762b6080dec2585d895906 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 20 Sep 2018 13:20:19 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / - MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches licensing used by other BCM5301X files and is preferred as: -1) GPL 2.0+ makes it clearly compatible with Linux kernel -2) MIT is also permissive but preferred over ISC - -This file has been developed by me & once modified by Vivek. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Acked-by: Vivek Unune <npcomplete13@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47094.dtsi | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm47094.dtsi -+++ b/arch/arm/boot/dts/bcm47094.dtsi -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - #include "bcm4708.dtsi" diff --git a/target/linux/bcm53xx/patches-4.14/035-v4.21-0003-ARM-dts-BCM53573-Relicense-Tenda-AC9-file-to-the-GPL.patch b/target/linux/bcm53xx/patches-4.14/035-v4.21-0003-ARM-dts-BCM53573-Relicense-Tenda-AC9-file-to-the-GPL.patch deleted file mode 100644 index a5358b70c3..0000000000 --- a/target/linux/bcm53xx/patches-4.14/035-v4.21-0003-ARM-dts-BCM53573-Relicense-Tenda-AC9-file-to-the-GPL.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 1c9001b4f69a37820862286b3bbcdde152a52dcf Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 20 Sep 2018 13:37:47 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+ - / MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches licensing used by most of BCM5301X files and is preferred as: -1) GPL 2.0+ makes it clearly compatible with Linux kernel -2) MIT is also permissive but preferred over ISC - -This file was fully developed by me. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts -+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; diff --git a/target/linux/bcm53xx/patches-4.14/035-v4.21-0004-ARM-dts-BCM53573-Relicense-SoC-file-to-the-GPL-2.0-M.patch b/target/linux/bcm53xx/patches-4.14/035-v4.21-0004-ARM-dts-BCM53573-Relicense-SoC-file-to-the-GPL-2.0-M.patch deleted file mode 100644 index 56cd6376aa..0000000000 --- a/target/linux/bcm53xx/patches-4.14/035-v4.21-0004-ARM-dts-BCM53573-Relicense-SoC-file-to-the-GPL-2.0-M.patch +++ /dev/null @@ -1,33 +0,0 @@ -From ca3a6e705cad10662827093d5426abe078861793 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 20 Sep 2018 13:39:28 +0200 -Subject: [PATCH] ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches licensing used by most of BCM5301X files and is preferred as: -1) GPL 2.0+ makes it clearly compatible with Linux kernel -2) MIT is also permissive but preferred over ISC - -This file has been developed by me & once modified by Rob dropping a -single leading zero in an UART address. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Acked-by: Rob Herring <robh@kernel.org> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm53573.dtsi | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> -- * -- * Licensed under the ISC license. - */ - - #include <dt-bindings/gpio/gpio.h> diff --git a/target/linux/bcm53xx/patches-4.14/035-v4.21-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch b/target/linux/bcm53xx/patches-4.14/035-v4.21-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch deleted file mode 100644 index d657d7ab1c..0000000000 --- a/target/linux/bcm53xx/patches-4.14/035-v4.21-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6500-V2.patch +++ /dev/null @@ -1,75 +0,0 @@ -From 03e96644d7a810916fc4997d572577e876908b18 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ren=C3=A9=20Kjellerup?= <rk.katana.steel@gmail.com> -Date: Mon, 1 Oct 2018 15:07:16 -0700 -Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2 - -It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331 -wireless chipsets. The BCM4331 5GHz chip currently isn't supported only -due to missing compatible firmware. - -Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 45 +++++++++++++++++++++++++ - 2 files changed, 46 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-asus-rt-ac68u.dtb \ - bcm4708-buffalo-wzr-1750dhp.dtb \ - bcm4708-linksys-ea6300-v1.dtb \ -+ bcm4708-linksys-ea6500-v2.dtb \ - bcm4708-luxul-xap-1510.dtb \ - bcm4708-luxul-xwc-1000.dtb \ - bcm4708-netgear-r6250.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts -@@ -0,0 +1,45 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> -+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com> -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "linksys,ea6500-v2", "brcm,bcm4708"; -+ model = "Linksys EA6500 V2"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&usb3_phy { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/035-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch b/target/linux/bcm53xx/patches-4.14/035-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch deleted file mode 100644 index 5f6dd17dc7..0000000000 --- a/target/linux/bcm53xx/patches-4.14/035-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 9994241ac97cb84d1df98fdc172d3cc6b04b11bf Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 9 Nov 2018 09:56:49 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Describe Northstar pins mux controller -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This describes hardware & will allow referencing pin functions. The -first usage is UART1 which allows supporting devices using it. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 44 +++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 44 insertions(+) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -37,6 +37,8 @@ - reg = <0x0400 0x100>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&iprocslow>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinmux_uart1>; - status = "disabled"; - }; - }; -@@ -391,6 +393,48 @@ - status = "disabled"; - }; - -+ dmu@1800c000 { -+ compatible = "simple-bus"; -+ ranges = <0 0x1800c000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ cru@100 { -+ compatible = "simple-bus"; -+ reg = <0x100 0x1a4>; -+ ranges; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ pin-controller@1c0 { -+ compatible = "brcm,bcm4708-pinmux"; -+ reg = <0x1c0 0x24>; -+ reg-names = "cru_gpio_control"; -+ -+ spi-pins { -+ groups = "spi_grp"; -+ function = "spi"; -+ }; -+ -+ i2c { -+ groups = "i2c_grp"; -+ function = "i2c"; -+ }; -+ -+ pwm { -+ groups = "pwm0_grp", "pwm1_grp", -+ "pwm2_grp", "pwm3_grp"; -+ function = "pwm"; -+ }; -+ -+ pinmux_uart1: uart1 { -+ groups = "uart1_grp"; -+ function = "uart1"; -+ }; -+ }; -+ }; -+ }; -+ - lcpll0: lcpll0@1800c100 { - #clock-cells = <1>; - compatible = "brcm,nsp-lcpll0"; diff --git a/target/linux/bcm53xx/patches-4.14/036-v5.1-0001-ARM-dts-BCM53573-Relicense-Luxul-files-to-the-GPL-2..patch b/target/linux/bcm53xx/patches-4.14/036-v5.1-0001-ARM-dts-BCM53573-Relicense-Luxul-files-to-the-GPL-2..patch deleted file mode 100644 index 5883577d53..0000000000 --- a/target/linux/bcm53xx/patches-4.14/036-v5.1-0001-ARM-dts-BCM53573-Relicense-Luxul-files-to-the-GPL-2..patch +++ /dev/null @@ -1,41 +0,0 @@ -From b7f264fa496eb2a6dd1d67dc91dbe8ffcb142487 Mon Sep 17 00:00:00 2001 -From: Dan Haab <riproute@gmail.com> -Date: Sun, 2 Dec 2018 17:00:15 -0700 -Subject: [PATCH] ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / - MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This matches licensing used by other BCM53573 files and BCM5301X. - -Signed-off-by: Dan Haab <dan.haab@luxul.com> -Acked-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 3 +-- - arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 3 +-- - 2 files changed, 2 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright 2017 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -1,7 +1,6 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - /* - * Copyright 2017 Luxul Inc. -- * -- * Licensed under the ISC license. - */ - - /dts-v1/; diff --git a/target/linux/bcm53xx/patches-4.14/036-v5.1-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Phicomm-K3.patch b/target/linux/bcm53xx/patches-4.14/036-v5.1-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Phicomm-K3.patch deleted file mode 100644 index d77dedbacf..0000000000 --- a/target/linux/bcm53xx/patches-4.14/036-v5.1-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Phicomm-K3.patch +++ /dev/null @@ -1,107 +0,0 @@ -From 40a17923367118e32e5e413a952736dd83635b32 Mon Sep 17 00:00:00 2001 -From: Hao Dong <halbertdong@gmail.com> -Date: Sun, 20 Jan 2019 23:33:27 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This router has BCM4709C0 SoC, 128 MiB NAND flash (MX30LF1G18AC-TI), -512 MiB memory and 3 x LAN and 1 x WAN ports. WiFi chips are -BCM4366C0 x 2. The router has a small LCD and 3 capactive keys driven by -a PIC microcontroller, which is in turn wired to UART1 of main board. - -Signed-off-by: Hao Dong <halbertdong@gmail.com> -[rmilecki: drop chosen { }, fix whitespaces, update commit message] -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 71 +++++++++++++++++++++++ - 2 files changed, 72 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-phicomm-k3.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47094-luxul-xwr-3100.dtb \ - bcm47094-luxul-xwr-3150-v1.dtb \ - bcm47094-netgear-r8500.dtb \ -+ bcm47094-phicomm-k3.dtb \ - bcm94708.dtb \ - bcm94709.dtb \ - bcm953012er.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -@@ -0,0 +1,71 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com> -+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com> -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47094.dtsi" -+#include "bcm5301x-nand-cs0-bch4.dtsi" -+ -+/ { -+ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "Phicomm K3"; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x18000000>; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&uart1 { -+ status = "okay"; -+}; -+ -+&usb3_phy { -+ status = "okay"; -+}; -+ -+&nandcs { -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "boot"; -+ reg = <0x0000000 0x0080000>; -+ read-only; -+ }; -+ -+ partition@80000 { -+ label = "nvram"; -+ reg = <0x0080000 0x0100000>; -+ }; -+ -+ partition@180000{ -+ label = "phicomm"; -+ reg = <0x0180000 0x0280000>; -+ read-only; -+ }; -+ -+ partition@400000 { -+ label = "firmware"; -+ reg = <0x0400000 0x7C00000>; -+ compatible = "brcm,trx"; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/080-spi-bcm53xx-simplify-reading-SPI-data.patch b/target/linux/bcm53xx/patches-4.14/080-spi-bcm53xx-simplify-reading-SPI-data.patch deleted file mode 100644 index ee377c491f..0000000000 --- a/target/linux/bcm53xx/patches-4.14/080-spi-bcm53xx-simplify-reading-SPI-data.patch +++ /dev/null @@ -1,107 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Fri, 29 Dec 2017 14:44:09 +0100 -Subject: [PATCH] spi: bcm53xx: simplify reading SPI data -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit makes transfer function use spi_transfer_is_last to -determine if currently processed transfer is the last one. Thanks to -that we finally set hardware registers properly and it makes controller -behave the way it's expected to. - -This allows simplifying read function which can now simply start reading -from the slot 0 instead of the last saved offset. It has been -successfully tested using spi_write_then_read. - -Moreover this change fixes handling messages with two writing transfers. -It's important for SPI flash devices as their drivers commonly use one -transfer for a command and another one for data. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - drivers/spi/spi-bcm53xx.c | 26 ++++++++++---------------- - 1 file changed, 10 insertions(+), 16 deletions(-) - ---- a/drivers/spi/spi-bcm53xx.c -+++ b/drivers/spi/spi-bcm53xx.c -@@ -27,8 +27,6 @@ struct bcm53xxspi { - struct bcma_device *core; - struct spi_master *master; - void __iomem *mmio_base; -- -- size_t read_offset; - bool bspi; /* Boot SPI mode with memory mapping */ - }; - -@@ -172,8 +170,6 @@ static void bcm53xxspi_buf_write(struct - - if (!cont) - bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); -- -- b53spi->read_offset = len; - } - - static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf, -@@ -182,10 +178,10 @@ static void bcm53xxspi_buf_read(struct b - u32 tmp; - int i; - -- for (i = 0; i < b53spi->read_offset + len; i++) { -+ for (i = 0; i < len; i++) { - tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | - B53SPI_CDRAM_PCS_DSCK; -- if (!cont && i == b53spi->read_offset + len - 1) -+ if (!cont && i == len - 1) - tmp &= ~B53SPI_CDRAM_CONT; - tmp &= ~0x1; - /* Command Register File */ -@@ -194,8 +190,7 @@ static void bcm53xxspi_buf_read(struct b - - /* Set queue pointers */ - bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); -- bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, -- b53spi->read_offset + len - 1); -+ bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1); - - if (cont) - bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); -@@ -214,13 +209,11 @@ static void bcm53xxspi_buf_read(struct b - bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); - - for (i = 0; i < len; ++i) { -- int offset = b53spi->read_offset + i; -+ u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2); - - /* Data stored in the transmit register file LSB */ -- r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2)); -+ r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg); - } -- -- b53spi->read_offset = 0; - } - - static int bcm53xxspi_transfer_one(struct spi_master *master, -@@ -238,7 +231,8 @@ static int bcm53xxspi_transfer_one(struc - left = t->len; - while (left) { - size_t to_write = min_t(size_t, 16, left); -- bool cont = left - to_write > 0; -+ bool cont = !spi_transfer_is_last(master, t) || -+ left - to_write > 0; - - bcm53xxspi_buf_write(b53spi, buf, to_write, cont); - left -= to_write; -@@ -250,9 +244,9 @@ static int bcm53xxspi_transfer_one(struc - buf = (u8 *)t->rx_buf; - left = t->len; - while (left) { -- size_t to_read = min_t(size_t, 16 - b53spi->read_offset, -- left); -- bool cont = left - to_read > 0; -+ size_t to_read = min_t(size_t, 16, left); -+ bool cont = !spi_transfer_is_last(master, t) || -+ left - to_read > 0; - - bcm53xxspi_buf_read(b53spi, buf, to_read, cont); - left -= to_read; diff --git a/target/linux/bcm53xx/patches-4.14/082-pinctrl-bcm-add-Northstar-driver.patch b/target/linux/bcm53xx/patches-4.14/082-pinctrl-bcm-add-Northstar-driver.patch deleted file mode 100644 index 1d1b038b41..0000000000 --- a/target/linux/bcm53xx/patches-4.14/082-pinctrl-bcm-add-Northstar-driver.patch +++ /dev/null @@ -1,427 +0,0 @@ -From c12fb1774deaa9c9408b19db8d43d3612f6e47a0 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 26 Sep 2018 21:31:03 +0200 -Subject: [PATCH] pinctrl: bcm: add Northstar driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This driver provides support for Northstar mux controller. It differs -from Northstar Plus one so a new binding and driver were needed. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/bcm/Kconfig | 13 ++ - drivers/pinctrl/bcm/Makefile | 1 + - drivers/pinctrl/bcm/pinctrl-ns.c | 372 +++++++++++++++++++++++++++++++++++++++ - 3 files changed, 386 insertions(+) - create mode 100644 drivers/pinctrl/bcm/pinctrl-ns.c - ---- a/drivers/pinctrl/bcm/Kconfig -+++ b/drivers/pinctrl/bcm/Kconfig -@@ -72,6 +72,19 @@ config PINCTRL_CYGNUS_MUX - configuration, with the exception that certain individual pins - can be overridden to GPIO function - -+config PINCTRL_NS -+ bool "Broadcom Northstar pins driver" -+ depends on OF && (ARCH_BCM_5301X || COMPILE_TEST) -+ select PINMUX -+ select GENERIC_PINCONF -+ default ARCH_BCM_5301X -+ help -+ Say yes here to enable the Broadcom NS SoC pins driver. -+ -+ The Broadcom Northstar pins driver supports muxing multi-purpose pins -+ that can be used for various functions (e.g. SPI, I2C, UART) as well -+ as GPIOs. -+ - config PINCTRL_NSP_GPIO - bool "Broadcom NSP GPIO (with PINCONF) driver" - depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST) ---- a/drivers/pinctrl/bcm/Makefile -+++ b/drivers/pinctrl/bcm/Makefile -@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinct - obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o - obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o - obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o -+obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o - obj-$(CONFIG_PINCTRL_NSP_GPIO) += pinctrl-nsp-gpio.o - obj-$(CONFIG_PINCTRL_NS2_MUX) += pinctrl-ns2-mux.o - obj-$(CONFIG_PINCTRL_NSP_MUX) += pinctrl-nsp-mux.o ---- /dev/null -+++ b/drivers/pinctrl/bcm/pinctrl-ns.c -@@ -0,0 +1,372 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (C) 2018 Rafał Miłecki <rafal@milecki.pl> -+ */ -+ -+#include <linux/err.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/of_device.h> -+#include <linux/pinctrl/pinconf-generic.h> -+#include <linux/pinctrl/pinctrl.h> -+#include <linux/pinctrl/pinmux.h> -+#include <linux/platform_device.h> -+#include <linux/slab.h> -+ -+#define FLAG_BCM4708 BIT(1) -+#define FLAG_BCM4709 BIT(2) -+#define FLAG_BCM53012 BIT(3) -+ -+struct ns_pinctrl { -+ struct device *dev; -+ unsigned int chipset_flag; -+ struct pinctrl_dev *pctldev; -+ void __iomem *base; -+ -+ struct pinctrl_desc pctldesc; -+ struct ns_pinctrl_group *groups; -+ unsigned int num_groups; -+ struct ns_pinctrl_function *functions; -+ unsigned int num_functions; -+}; -+ -+/* -+ * Pins -+ */ -+ -+static const struct pinctrl_pin_desc ns_pinctrl_pins[] = { -+ { 0, "spi_clk", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 1, "spi_ss", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 2, "spi_mosi", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 3, "spi_miso", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 4, "i2c_scl", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 5, "i2c_sda", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 6, "mdc", (void *)(FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 7, "mdio", (void *)(FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 8, "pwm0", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 9, "pwm1", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 10, "pwm2", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 11, "pwm3", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 12, "uart1_rx", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 13, "uart1_tx", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 14, "uart1_cts", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 15, "uart1_rts", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 16, "uart2_rx", (void *)(FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 17, "uart2_tx", (void *)(FLAG_BCM4709 | FLAG_BCM53012) }, -+/* TODO { ??, "xtal_out", (void *)(FLAG_BCM4709) }, */ -+ { 22, "sdio_pwr", (void *)(FLAG_BCM4709 | FLAG_BCM53012) }, -+ { 23, "sdio_en_1p8v", (void *)(FLAG_BCM4709 | FLAG_BCM53012) }, -+}; -+ -+/* -+ * Groups -+ */ -+ -+struct ns_pinctrl_group { -+ const char *name; -+ const unsigned int *pins; -+ const unsigned int num_pins; -+ unsigned int chipsets; -+}; -+ -+static const unsigned int spi_pins[] = { 0, 1, 2, 3 }; -+static const unsigned int i2c_pins[] = { 4, 5 }; -+static const unsigned int mdio_pins[] = { 6, 7 }; -+static const unsigned int pwm0_pins[] = { 8 }; -+static const unsigned int pwm1_pins[] = { 9 }; -+static const unsigned int pwm2_pins[] = { 10 }; -+static const unsigned int pwm3_pins[] = { 11 }; -+static const unsigned int uart1_pins[] = { 12, 13, 14, 15 }; -+static const unsigned int uart2_pins[] = { 16, 17 }; -+static const unsigned int sdio_pwr_pins[] = { 22 }; -+static const unsigned int sdio_1p8v_pins[] = { 23 }; -+ -+#define NS_GROUP(_name, _pins, _chipsets) \ -+{ \ -+ .name = _name, \ -+ .pins = _pins, \ -+ .num_pins = ARRAY_SIZE(_pins), \ -+ .chipsets = _chipsets, \ -+} -+ -+static const struct ns_pinctrl_group ns_pinctrl_groups[] = { -+ NS_GROUP("spi_grp", spi_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("i2c_grp", i2c_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("mdio_grp", mdio_pins, FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("pwm0_grp", pwm0_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("pwm1_grp", pwm1_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("pwm2_grp", pwm2_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("pwm3_grp", pwm3_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("uart1_grp", uart1_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("uart2_grp", uart2_pins, FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("sdio_pwr_grp", sdio_pwr_pins, FLAG_BCM4709 | FLAG_BCM53012), -+ NS_GROUP("sdio_1p8v_grp", sdio_1p8v_pins, FLAG_BCM4709 | FLAG_BCM53012), -+}; -+ -+/* -+ * Functions -+ */ -+ -+struct ns_pinctrl_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned int num_groups; -+ unsigned int chipsets; -+}; -+ -+static const char * const spi_groups[] = { "spi_grp" }; -+static const char * const i2c_groups[] = { "i2c_grp" }; -+static const char * const mdio_groups[] = { "mdio_grp" }; -+static const char * const pwm_groups[] = { "pwm0_grp", "pwm1_grp", "pwm2_grp", -+ "pwm3_grp" }; -+static const char * const uart1_groups[] = { "uart1_grp" }; -+static const char * const uart2_groups[] = { "uart2_grp" }; -+static const char * const sdio_groups[] = { "sdio_pwr_grp", "sdio_1p8v_grp" }; -+ -+#define NS_FUNCTION(_name, _groups, _chipsets) \ -+{ \ -+ .name = _name, \ -+ .groups = _groups, \ -+ .num_groups = ARRAY_SIZE(_groups), \ -+ .chipsets = _chipsets, \ -+} -+ -+static const struct ns_pinctrl_function ns_pinctrl_functions[] = { -+ NS_FUNCTION("spi", spi_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_FUNCTION("i2c", i2c_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_FUNCTION("mdio", mdio_groups, FLAG_BCM4709 | FLAG_BCM53012), -+ NS_FUNCTION("pwm", pwm_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_FUNCTION("uart1", uart1_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012), -+ NS_FUNCTION("uart2", uart2_groups, FLAG_BCM4709 | FLAG_BCM53012), -+ NS_FUNCTION("sdio", sdio_groups, FLAG_BCM4709 | FLAG_BCM53012), -+}; -+ -+/* -+ * Groups code -+ */ -+ -+static int ns_pinctrl_get_groups_count(struct pinctrl_dev *pctrl_dev) -+{ -+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev); -+ -+ return ns_pinctrl->num_groups; -+} -+ -+static const char *ns_pinctrl_get_group_name(struct pinctrl_dev *pctrl_dev, -+ unsigned int selector) -+{ -+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev); -+ -+ return ns_pinctrl->groups[selector].name; -+} -+ -+static int ns_pinctrl_get_group_pins(struct pinctrl_dev *pctrl_dev, -+ unsigned int selector, -+ const unsigned int **pins, -+ unsigned int *num_pins) -+{ -+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev); -+ -+ *pins = ns_pinctrl->groups[selector].pins; -+ *num_pins = ns_pinctrl->groups[selector].num_pins; -+ -+ return 0; -+} -+ -+static const struct pinctrl_ops ns_pinctrl_ops = { -+ .get_groups_count = ns_pinctrl_get_groups_count, -+ .get_group_name = ns_pinctrl_get_group_name, -+ .get_group_pins = ns_pinctrl_get_group_pins, -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group, -+ .dt_free_map = pinconf_generic_dt_free_map, -+}; -+ -+/* -+ * Functions code -+ */ -+ -+static int ns_pinctrl_get_functions_count(struct pinctrl_dev *pctrl_dev) -+{ -+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev); -+ -+ return ns_pinctrl->num_functions; -+} -+ -+static const char *ns_pinctrl_get_function_name(struct pinctrl_dev *pctrl_dev, -+ unsigned int selector) -+{ -+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev); -+ -+ return ns_pinctrl->functions[selector].name; -+} -+ -+static int ns_pinctrl_get_function_groups(struct pinctrl_dev *pctrl_dev, -+ unsigned int selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev); -+ -+ *groups = ns_pinctrl->functions[selector].groups; -+ *num_groups = ns_pinctrl->functions[selector].num_groups; -+ -+ return 0; -+} -+ -+static int ns_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev, -+ unsigned int func_select, -+ unsigned int grp_select) -+{ -+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev); -+ u32 unset = 0; -+ u32 tmp; -+ int i; -+ -+ for (i = 0; i < ns_pinctrl->groups[grp_select].num_pins; i++) { -+ int pin_number = ns_pinctrl->groups[grp_select].pins[i]; -+ -+ unset |= BIT(pin_number); -+ } -+ -+ tmp = readl(ns_pinctrl->base); -+ tmp &= ~unset; -+ writel(tmp, ns_pinctrl->base); -+ -+ return 0; -+} -+ -+static const struct pinmux_ops ns_pinctrl_pmxops = { -+ .get_functions_count = ns_pinctrl_get_functions_count, -+ .get_function_name = ns_pinctrl_get_function_name, -+ .get_function_groups = ns_pinctrl_get_function_groups, -+ .set_mux = ns_pinctrl_set_mux, -+}; -+ -+/* -+ * Controller code -+ */ -+ -+static struct pinctrl_desc ns_pinctrl_desc = { -+ .name = "pinctrl-ns", -+ .pctlops = &ns_pinctrl_ops, -+ .pmxops = &ns_pinctrl_pmxops, -+}; -+ -+static const struct of_device_id ns_pinctrl_of_match_table[] = { -+ { .compatible = "brcm,bcm4708-pinmux", .data = (void *)FLAG_BCM4708, }, -+ { .compatible = "brcm,bcm4709-pinmux", .data = (void *)FLAG_BCM4709, }, -+ { .compatible = "brcm,bcm53012-pinmux", .data = (void *)FLAG_BCM53012, }, -+ { } -+}; -+ -+static int ns_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ const struct of_device_id *of_id; -+ struct ns_pinctrl *ns_pinctrl; -+ struct pinctrl_desc *pctldesc; -+ struct pinctrl_pin_desc *pin; -+ struct ns_pinctrl_group *group; -+ struct ns_pinctrl_function *function; -+ struct resource *res; -+ int i; -+ -+ ns_pinctrl = devm_kzalloc(dev, sizeof(*ns_pinctrl), GFP_KERNEL); -+ if (!ns_pinctrl) -+ return -ENOMEM; -+ pctldesc = &ns_pinctrl->pctldesc; -+ platform_set_drvdata(pdev, ns_pinctrl); -+ -+ /* Set basic properties */ -+ -+ ns_pinctrl->dev = dev; -+ -+ of_id = of_match_device(ns_pinctrl_of_match_table, dev); -+ if (!of_id) -+ return -EINVAL; -+ ns_pinctrl->chipset_flag = (unsigned int)of_id->data; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "cru_gpio_control"); -+ ns_pinctrl->base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(ns_pinctrl->base)) { -+ dev_err(dev, "Failed to map pinctrl regs\n"); -+ return PTR_ERR(ns_pinctrl->base); -+ } -+ -+ memcpy(pctldesc, &ns_pinctrl_desc, sizeof(*pctldesc)); -+ -+ /* Set pinctrl properties */ -+ -+ pctldesc->pins = devm_kcalloc(dev, ARRAY_SIZE(ns_pinctrl_pins), -+ sizeof(struct pinctrl_pin_desc), -+ GFP_KERNEL); -+ if (!pctldesc->pins) -+ return -ENOMEM; -+ for (i = 0, pin = (struct pinctrl_pin_desc *)&pctldesc->pins[0]; -+ i < ARRAY_SIZE(ns_pinctrl_pins); i++) { -+ const struct pinctrl_pin_desc *src = &ns_pinctrl_pins[i]; -+ unsigned int chipsets = (unsigned int)src->drv_data; -+ -+ if (chipsets & ns_pinctrl->chipset_flag) { -+ memcpy(pin++, src, sizeof(*src)); -+ pctldesc->npins++; -+ } -+ } -+ -+ ns_pinctrl->groups = devm_kcalloc(dev, ARRAY_SIZE(ns_pinctrl_groups), -+ sizeof(struct ns_pinctrl_group), -+ GFP_KERNEL); -+ if (!ns_pinctrl->groups) -+ return -ENOMEM; -+ for (i = 0, group = &ns_pinctrl->groups[0]; -+ i < ARRAY_SIZE(ns_pinctrl_groups); i++) { -+ const struct ns_pinctrl_group *src = &ns_pinctrl_groups[i]; -+ -+ if (src->chipsets & ns_pinctrl->chipset_flag) { -+ memcpy(group++, src, sizeof(*src)); -+ ns_pinctrl->num_groups++; -+ } -+ } -+ -+ ns_pinctrl->functions = devm_kcalloc(dev, -+ ARRAY_SIZE(ns_pinctrl_functions), -+ sizeof(struct ns_pinctrl_function), -+ GFP_KERNEL); -+ if (!ns_pinctrl->functions) -+ return -ENOMEM; -+ for (i = 0, function = &ns_pinctrl->functions[0]; -+ i < ARRAY_SIZE(ns_pinctrl_functions); i++) { -+ const struct ns_pinctrl_function *src = &ns_pinctrl_functions[i]; -+ -+ if (src->chipsets & ns_pinctrl->chipset_flag) { -+ memcpy(function++, src, sizeof(*src)); -+ ns_pinctrl->num_functions++; -+ } -+ } -+ -+ /* Register */ -+ -+ ns_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, ns_pinctrl); -+ if (IS_ERR(ns_pinctrl->pctldev)) { -+ dev_err(dev, "Failed to register pinctrl\n"); -+ return PTR_ERR(ns_pinctrl->pctldev); -+ } -+ -+ return 0; -+} -+ -+static struct platform_driver ns_pinctrl_driver = { -+ .probe = ns_pinctrl_probe, -+ .driver = { -+ .name = "ns-pinmux", -+ .of_match_table = ns_pinctrl_of_match_table, -+ }, -+}; -+ -+module_platform_driver(ns_pinctrl_driver); -+ -+MODULE_AUTHOR("Rafał Miłecki"); -+MODULE_LICENSE("GPL v2"); -+MODULE_DEVICE_TABLE(of, ns_pinctrl_of_match_table); diff --git a/target/linux/bcm53xx/patches-4.14/083-pinctrl-bcm-ns-Use-uintptr_t-for-casting-data.patch b/target/linux/bcm53xx/patches-4.14/083-pinctrl-bcm-ns-Use-uintptr_t-for-casting-data.patch deleted file mode 100644 index afaed68d05..0000000000 --- a/target/linux/bcm53xx/patches-4.14/083-pinctrl-bcm-ns-Use-uintptr_t-for-casting-data.patch +++ /dev/null @@ -1,38 +0,0 @@ -From ce7bdb957b8e3f1cbf0a3358f1deef385dff6502 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 11 Oct 2018 13:23:40 +0200 -Subject: [PATCH] pinctrl: bcm: ns: Use uintptr_t for casting data -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Fix up a compiler error on 64bit architectures where pointers -and integers differ in size. - -Suggested-by: Arnd Bergmann <arnd@arndb.de> -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/bcm/pinctrl-ns.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/pinctrl/bcm/pinctrl-ns.c -+++ b/drivers/pinctrl/bcm/pinctrl-ns.c -@@ -285,7 +285,7 @@ static int ns_pinctrl_probe(struct platf - of_id = of_match_device(ns_pinctrl_of_match_table, dev); - if (!of_id) - return -EINVAL; -- ns_pinctrl->chipset_flag = (unsigned int)of_id->data; -+ ns_pinctrl->chipset_flag = (uintptr_t)of_id->data; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "cru_gpio_control"); -@@ -307,7 +307,7 @@ static int ns_pinctrl_probe(struct platf - for (i = 0, pin = (struct pinctrl_pin_desc *)&pctldesc->pins[0]; - i < ARRAY_SIZE(ns_pinctrl_pins); i++) { - const struct pinctrl_pin_desc *src = &ns_pinctrl_pins[i]; -- unsigned int chipsets = (unsigned int)src->drv_data; -+ unsigned int chipsets = (uintptr_t)src->drv_data; - - if (chipsets & ns_pinctrl->chipset_flag) { - memcpy(pin++, src, sizeof(*src)); diff --git a/target/linux/bcm53xx/patches-4.14/084-v4.21-pinctrl-bcm-ns-support-updated-DT-binding-as-syscon-.patch b/target/linux/bcm53xx/patches-4.14/084-v4.21-pinctrl-bcm-ns-support-updated-DT-binding-as-syscon-.patch deleted file mode 100644 index 45595bddc9..0000000000 --- a/target/linux/bcm53xx/patches-4.14/084-v4.21-pinctrl-bcm-ns-support-updated-DT-binding-as-syscon-.patch +++ /dev/null @@ -1,99 +0,0 @@ -From a49d784d5a8272d0f63c448fe8dc69e589db006e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Tue, 18 Dec 2018 16:58:08 +0100 -Subject: [PATCH] pinctrl: bcm: ns: support updated DT binding as syscon - subnode -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Documentation has been recently updated specifying that pinctrl should -be subnode of the CRU "syscon". Support that by using parent node for -regmap and reading "offset" property from the DT. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/bcm/pinctrl-ns.c | 29 +++++++++++++++++++---------- - 1 file changed, 19 insertions(+), 10 deletions(-) - ---- a/drivers/pinctrl/bcm/pinctrl-ns.c -+++ b/drivers/pinctrl/bcm/pinctrl-ns.c -@@ -5,6 +5,7 @@ - - #include <linux/err.h> - #include <linux/io.h> -+#include <linux/mfd/syscon.h> - #include <linux/module.h> - #include <linux/of.h> - #include <linux/of_device.h> -@@ -12,6 +13,7 @@ - #include <linux/pinctrl/pinctrl.h> - #include <linux/pinctrl/pinmux.h> - #include <linux/platform_device.h> -+#include <linux/regmap.h> - #include <linux/slab.h> - - #define FLAG_BCM4708 BIT(1) -@@ -22,7 +24,8 @@ struct ns_pinctrl { - struct device *dev; - unsigned int chipset_flag; - struct pinctrl_dev *pctldev; -- void __iomem *base; -+ struct regmap *regmap; -+ u32 offset; - - struct pinctrl_desc pctldesc; - struct ns_pinctrl_group *groups; -@@ -229,9 +232,9 @@ static int ns_pinctrl_set_mux(struct pin - unset |= BIT(pin_number); - } - -- tmp = readl(ns_pinctrl->base); -+ regmap_read(ns_pinctrl->regmap, ns_pinctrl->offset, &tmp); - tmp &= ~unset; -- writel(tmp, ns_pinctrl->base); -+ regmap_write(ns_pinctrl->regmap, ns_pinctrl->offset, tmp); - - return 0; - } -@@ -263,13 +266,13 @@ static const struct of_device_id ns_pinc - static int ns_pinctrl_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; - const struct of_device_id *of_id; - struct ns_pinctrl *ns_pinctrl; - struct pinctrl_desc *pctldesc; - struct pinctrl_pin_desc *pin; - struct ns_pinctrl_group *group; - struct ns_pinctrl_function *function; -- struct resource *res; - int i; - - ns_pinctrl = devm_kzalloc(dev, sizeof(*ns_pinctrl), GFP_KERNEL); -@@ -287,12 +290,18 @@ static int ns_pinctrl_probe(struct platf - return -EINVAL; - ns_pinctrl->chipset_flag = (uintptr_t)of_id->data; - -- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, -- "cru_gpio_control"); -- ns_pinctrl->base = devm_ioremap_resource(dev, res); -- if (IS_ERR(ns_pinctrl->base)) { -- dev_err(dev, "Failed to map pinctrl regs\n"); -- return PTR_ERR(ns_pinctrl->base); -+ ns_pinctrl->regmap = syscon_node_to_regmap(of_get_parent(np)); -+ if (IS_ERR(ns_pinctrl->regmap)) { -+ int err = PTR_ERR(ns_pinctrl->regmap); -+ -+ dev_err(dev, "Failed to map pinctrl regs: %d\n", err); -+ -+ return err; -+ } -+ -+ if (of_property_read_u32(np, "offset", &ns_pinctrl->offset)) { -+ dev_err(dev, "Failed to get register offset\n"); -+ return -ENOENT; - } - - memcpy(pctldesc, &ns_pinctrl_desc, sizeof(*pctldesc)); diff --git a/target/linux/bcm53xx/patches-4.14/130-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch b/target/linux/bcm53xx/patches-4.14/130-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch deleted file mode 100644 index 3320c1e233..0000000000 --- a/target/linux/bcm53xx/patches-4.14/130-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWC-2000.patch +++ /dev/null @@ -1,80 +0,0 @@ -From: Dan Haab <dan.haab@legrand.com> -Date: Wed, 2 Oct 2019 09:57:26 -0600 -Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000 - -It's a simple network device based on BCM47094 with just a single -Ethernet port. - -Signed-off-by: Dan Haab <dan.haab@legrand.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++ - 2 files changed, 54 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -105,6 +105,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47094-luxul-abr-4500.dtb \ - bcm47094-luxul-xap-1610.dtb \ - bcm47094-luxul-xbr-4500.dtb \ -+ bcm47094-luxul-xwc-2000.dtb \ - bcm47094-luxul-xwr-3100.dtb \ - bcm47094-luxul-xwr-3150-v1.dtb \ - bcm47094-netgear-r8500.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -0,0 +1,53 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright 2019 Legrand AV Inc. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47094.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708"; -+ model = "Luxul XWC-2000 V1"; -+ -+ chosen { -+ bootargs = "earlycon"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x18000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ status { -+ label = "bcm53xx:green:status"; -+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "timer"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&uart1 { -+ status = "okay"; -+}; -+ -+&spi_nor { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch deleted file mode 100644 index 5784f5e5ab..0000000000 --- a/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ /dev/null @@ -1,137 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Sat, 1 Oct 2016 22:54:48 +0200 -Subject: [PATCH] usb: xhci: add support for performing fake doorbell - -Broadcom's Northstar XHCI controllers seem to need a special start -procedure to work correctly. There isn't any official documentation of -this, the problem is that controller doesn't detect any connected -devices with default setup. Moreover connecting USB device to controller -that doesn't run properly can cause SoC's watchdog issues. - -A workaround that was successfully tested on multiple devices is to -perform a fake doorbell. This patch adds code for doing this and enables -it on BCM4708 family. ---- - drivers/usb/host/xhci-plat.c | 6 +++++ - drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++--- - drivers/usb/host/xhci.h | 1 + - 3 files changed, 67 insertions(+), 3 deletions(-) - ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -67,12 +67,18 @@ static int xhci_priv_resume_quirk(struct - - static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) - { -+ struct platform_device *pdev = to_platform_device(dev); -+ struct device_node *node = pdev->dev.of_node; -+ - /* - * As of now platform drivers don't provide MSI support so we ensure - * here that the generic code does not try to make a pci_dev from our - * dev struct in order to setup MSI - */ - xhci->quirks |= XHCI_PLAT; -+ -+ if (node && of_machine_is_compatible("brcm,bcm4708")) -+ xhci->quirks |= XHCI_FAKE_DOORBELL; - } - - /* called during probe() after chip reset completes */ ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -166,6 +166,49 @@ int xhci_start(struct xhci_hcd *xhci) - return ret; - } - -+/** -+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot -+ * -+ * Some controllers require a fake doorbell to start correctly. Without that -+ * they simply don't detect any devices. -+ */ -+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id) -+{ -+ u32 temp; -+ -+ /* Alloc a virt device for that slot */ -+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) { -+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); -+ return -ENOMEM; -+ } -+ -+ /* Ring fake doorbell for slot_id ep 0 */ -+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0); -+ usleep_range(1000, 1500); -+ -+ /* Read the status to check if HSE is set or not */ -+ temp = readl(&xhci->op_regs->status); -+ -+ /* Clear HSE if set */ -+ if (temp & STS_FATAL) { -+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp); -+ temp &= ~0x1fff; -+ temp |= STS_FATAL; -+ writel(temp, &xhci->op_regs->status); -+ usleep_range(1000, 1500); -+ readl(&xhci->op_regs->status); -+ } -+ -+ /* Free virt device */ -+ xhci_free_virt_device(xhci, slot_id); -+ -+ /* We're done if controller is already running */ -+ if (readl(&xhci->op_regs->command) & CMD_RUN) -+ return 0; -+ -+ return xhci_start(xhci); -+} -+ - /* - * Reset a halted HC. - * -@@ -549,10 +592,20 @@ static int xhci_init(struct usb_hcd *hcd - - static int xhci_run_finished(struct xhci_hcd *xhci) - { -- if (xhci_start(xhci)) { -- xhci_halt(xhci); -- return -ENODEV; -+ int err; -+ -+ err = xhci_start(xhci); -+ if (err) { -+ err = -ENODEV; -+ goto err_halt; - } -+ -+ if (xhci->quirks & XHCI_FAKE_DOORBELL) { -+ err = xhci_fake_doorbell(xhci, 1); -+ if (err) -+ goto err_halt; -+ } -+ - xhci->shared_hcd->state = HC_STATE_RUNNING; - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - -@@ -562,6 +615,10 @@ static int xhci_run_finished(struct xhci - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "Finished xhci_run for USB3 roothub"); - return 0; -+ -+err_halt: -+ xhci_halt(xhci); -+ return err; - } - - /* ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -1840,6 +1840,7 @@ struct xhci_hcd { - #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) - #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) - #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) -+#define XHCI_FAKE_DOORBELL BIT_ULL(36) - - unsigned int num_active_eps; - unsigned int limit_active_eps; diff --git a/target/linux/bcm53xx/patches-4.14/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-4.14/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch deleted file mode 100644 index ef91db9014..0000000000 --- a/target/linux/bcm53xx/patches-4.14/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch +++ /dev/null @@ -1,101 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Wed, 24 Sep 2014 22:14:07 +0200 -Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Broadcom devices have broken CFE (bootloader) that leaves hardware in an -invalid state. It causes problems with booting Linux. On Northstar -devices kernel was randomly hanging in ~25% of tries during early init. -Hangs used to happen at random places in the start_kernel. On BCM53573 -kernel doesn't even seem to start booting. - -To workaround this problem we need to do following very early: -1) Clear 2 following bits in the SCTLR register: -#define CR_M (1 << 0) /* MMU enable */ -#define CR_C (1 << 2) /* Dcache enable */ -2) Flush the whole D-cache -3) Disable L2 cache - -Unfortunately this patch is not upstreamable as it does above things -unconditionally. We can't check if we are running on Broadcom platform -in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable -as it could break other devices support. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -32,6 +32,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y) - OBJS += ll_char_wr.o font.o - endif - -+ifeq ($(CONFIG_ARCH_BCM_5301X),y) -+OBJS += head-bcm_5301x-mpcore.o -+OBJS += cache-v7-min.o -+endif -+ - ifeq ($(CONFIG_ARCH_SA1100),y) - OBJS += head-sa1100.o - endif ---- /dev/null -+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S -@@ -0,0 +1,37 @@ -+/* -+ * -+ * Platform specific tweaks. This is merged into head.S by the linker. -+ * -+ */ -+ -+#include <linux/linkage.h> -+#include <asm/assembler.h> -+#include <asm/cp15.h> -+ -+ .section ".start", "ax" -+ -+/* -+ * This code section is spliced into the head code by the linker -+ */ -+ -+__plat_uncompress_start: -+ -+ @ Preserve r8/r7 i.e. kernel entry values -+ mov r12, r8 -+ -+ @ Clear MMU enable and Dcache enable bits -+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR -+ bic r0, #CR_C|CR_M -+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR -+ nop -+ -+ @ Call the cache invalidation routine -+ bl v7_flush_dcache_all -+ nop -+ mov r0,#0 -+ ldr r3, =0x19022000 @ L2 cache controller, control reg -+ str r0, [r3, #0x100] @ Disable L2 cache -+ nop -+ -+ @ Restore -+ mov r8, r12 ---- a/arch/arm/boot/compressed/cache-v7-min.S -+++ b/arch/arm/boot/compressed/cache-v7-min.S -@@ -12,6 +12,7 @@ - - #include <linux/linkage.h> - #include <linux/init.h> -+#include <asm/assembler.h> - - __INIT - -@@ -63,7 +64,7 @@ loop2: - ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r9, r2 ) - THUMB( orr r11, r11, r6 ) @ factor index number into r11 -- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way -+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the index - bge loop2 - subs r4, r4, #1 @ decrement the way diff --git a/target/linux/bcm53xx/patches-4.14/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch b/target/linux/bcm53xx/patches-4.14/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch deleted file mode 100644 index d1d287588c..0000000000 --- a/target/linux/bcm53xx/patches-4.14/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH] ARM: dts: BCM5301X: Update Northstar pinctrl binding -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -400,16 +400,12 @@ - #size-cells = <1>; - - cru@100 { -- compatible = "simple-bus"; -+ compatible = "syscon", "simple-mfd"; - reg = <0x100 0x1a4>; -- ranges; -- #address-cells = <1>; -- #size-cells = <1>; - -- pin-controller@1c0 { -+ pinctrl { - compatible = "brcm,bcm4708-pinmux"; -- reg = <0x1c0 0x24>; -- reg-names = "cru_gpio_control"; -+ offset = <0xc0>; - - spi-pins { - groups = "spi_grp"; diff --git a/target/linux/bcm53xx/patches-4.14/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.14/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch deleted file mode 100644 index c546ba9f62..0000000000 --- a/target/linux/bcm53xx/patches-4.14/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch +++ /dev/null @@ -1,64 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -98,6 +98,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-buffalo-wxr-1900dhp.dtb \ - bcm4709-linksys-ea9200.dtb \ - bcm4709-netgear-r7000.dtb \ -+ bcm4709-netgear-r7900.dtb \ - bcm4709-netgear-r8000.dtb \ - bcm4709-tplink-archer-c9-v1.dtb \ - bcm47094-dlink-dir-885l.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts -@@ -0,0 +1,42 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Netgear R7900 -+ * -+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4709.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708"; -+ model = "Netgear R7900"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; -+ }; -+ -+ axi@18000000 { -+ usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-4.14/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.14/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch deleted file mode 100644 index 5ebc7f89f2..0000000000 --- a/target/linux/bcm53xx/patches-4.14/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch +++ /dev/null @@ -1,20 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP - -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -101,6 +101,12 @@ - #address-cells = <1>; - #size-cells = <0>; - -+ power { -+ label = "Power"; -+ linux,code = <KEY_POWER>; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ }; -+ - restart { - label = "Reset"; - linux,code = <KEY_RESTART>; diff --git a/target/linux/bcm53xx/patches-4.14/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch b/target/linux/bcm53xx/patches-4.14/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch deleted file mode 100644 index 742f9265b1..0000000000 --- a/target/linux/bcm53xx/patches-4.14/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch +++ /dev/null @@ -1,116 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's enough to have proper stdout-path for getting serial working but -for some reason LEDE doesn't offer "Please press Enter to activate this -console." unless ttyS0 is specified. - -This is a workaround to get serial working in LEDE. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - ---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts -@@ -12,7 +12,7 @@ - model = "TP-LINK Archer C5 V2"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts -@@ -13,7 +13,7 @@ - model = "Luxul ABR-4500 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts -@@ -13,7 +13,7 @@ - model = "Luxul XBR-4500 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts -@@ -12,7 +12,7 @@ - model = "Luxul XAP-1440 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts -@@ -12,7 +12,7 @@ - model = "Luxul XAP-810 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts -@@ -12,7 +12,7 @@ - model = "Luxul XAP-1610 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts -@@ -13,7 +13,7 @@ - model = "Luxul XWR-3150 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts -@@ -13,6 +13,10 @@ - compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; - model = "Phicomm K3"; - -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ - memory { - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -13,7 +13,7 @@ - model = "Luxul XWC-2000 V1"; - - chosen { -- bootargs = "earlycon"; -+ bootargs = "console=ttyS0,115200 earlycon"; - }; - - memory { diff --git a/target/linux/bcm53xx/patches-4.14/321-ARM-dts-BCM5301X-Describe-partition-formats.patch b/target/linux/bcm53xx/patches-4.14/321-ARM-dts-BCM5301X-Describe-partition-formats.patch deleted file mode 100644 index 66ae6dca33..0000000000 --- a/target/linux/bcm53xx/patches-4.14/321-ARM-dts-BCM5301X-Describe-partition-formats.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 22 Nov 2018 09:21:49 +0100 -Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's needed by OpenWrt for custom partitioning. - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -34,6 +34,7 @@ - partition@0 { - label = "firmware"; - reg = <0x00000000 0x08000000>; -+ compatible = "seama"; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-4.14/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch b/target/linux/bcm53xx/patches-4.14/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch deleted file mode 100644 index 446ba6cdcd..0000000000 --- a/target/linux/bcm53xx/patches-4.14/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Subject: [PATCH] mtd: spi-nor: detect JEDEC incompatible w25q128 using 0x90 - command -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Some w25q128 chipsets don't support RDID (0x9f) command, they reply with -0xff-s only. To suppose such flashes fallback to the 0x90 command. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1230,6 +1230,18 @@ static const struct flash_info *spi_nor_ - } - dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n", - id[0], id[1], id[2]); -+ -+ tmp = nor->read_reg(nor, 0x90, id, SPI_NOR_MAX_ID_LEN); -+ if (tmp < 0) { -+ dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp); -+ return ERR_PTR(tmp); -+ } -+ dev_info(nor->dev, "using Read Manufacturer / Device ID command (0x%02x) returned %02x %02x\n", -+ 0x90, id[0x03], id[0x04]); -+ if (id[0x03] == 0xef && id[0x04] == 0x17) { -+ return spi_nor_match_id("w25q128"); -+ } -+ - return ERR_PTR(-ENODEV); - } - diff --git a/target/linux/bcm53xx/patches-4.14/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-4.14/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch deleted file mode 100644 index a86f4a8406..0000000000 --- a/target/linux/bcm53xx/patches-4.14/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 16 Oct 2014 20:52:16 +0200 -Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/mtd/ubi/attach.c | 5 +++++ - drivers/mtd/ubi/io.c | 4 ++++ - drivers/mtd/ubi/ubi.h | 1 + - 3 files changed, 10 insertions(+) - ---- a/drivers/mtd/ubi/attach.c -+++ b/drivers/mtd/ubi/attach.c -@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi - #define AV_ADD BIT(1) - #define AV_FIND_OR_ADD (AV_FIND | AV_ADD) - -+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */ -+bool erase_all_next; -+ - /** - * find_or_add_av - internal function to find a volume, add a volume or do - * both (find and add if missing). -@@ -1592,6 +1595,8 @@ int ubi_attach(struct ubi_device *ubi, i - if (!ai) - return -ENOMEM; - -+ erase_all_next = false; -+ - #ifdef CONFIG_MTD_UBI_FASTMAP - /* On small flash devices we disable fastmap in any case. */ - if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) { ---- a/drivers/mtd/ubi/io.c -+++ b/drivers/mtd/ubi/io.c -@@ -759,6 +759,10 @@ int ubi_io_read_ec_hdr(struct ubi_device - } - - magic = be32_to_cpu(ec_hdr->magic); -+ if (magic == 0xdeadc0de) -+ erase_all_next = true; -+ if (erase_all_next) -+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF; - if (magic != UBI_EC_HDR_MAGIC) { - if (mtd_is_eccerr(read_err)) - return UBI_IO_BAD_HDR_EBADMSG; ---- a/drivers/mtd/ubi/ubi.h -+++ b/drivers/mtd/ubi/ubi.h -@@ -829,6 +829,7 @@ extern struct mutex ubi_devices_mutex; - extern struct blocking_notifier_head ubi_notifiers; - - /* attach.c */ -+extern bool erase_all_next; - struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum, - int ec); - void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb); diff --git a/target/linux/bcm53xx/patches-4.14/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-4.14/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch deleted file mode 100644 index 91bb4fae11..0000000000 --- a/target/linux/bcm53xx/patches-4.14/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 13 May 2015 14:13:28 +0200 -Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/net/phy/b53/b53_common.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/net/phy/b53/b53_common.c -+++ b/drivers/net/phy/b53/b53_common.c -@@ -28,6 +28,7 @@ - #include <linux/of.h> - #include <linux/of_net.h> - #include <linux/platform_data/b53.h> -+#include <linux/of.h> - - #include "b53_regs.h" - #include "b53_priv.h" -@@ -1579,6 +1580,28 @@ static int b53_switch_init(struct b53_de - return ret; - } - -+ /* Set correct CPU port */ -+ if (of_machine_is_compatible("asus,rt-ac87u")) -+ sw_dev->cpu_port = 7; -+ else if (of_machine_is_compatible("netgear,r7900")) -+ sw_dev->cpu_port = 8; -+ else if (of_machine_is_compatible("netgear,r8000")) -+ sw_dev->cpu_port = 8; -+ else if (of_machine_is_compatible("netgear,r8500")) -+ sw_dev->cpu_port = 8; -+ -+ /* Enable extra ports */ -+ if (of_machine_is_compatible("tenda,ac9")) -+ dev->enabled_ports |= BIT(5); -+ -+ /* -+ * Workaround for devices using port 8 (connected to the 3rd iface). -+ * For some reason it doesn't work (no packets on eth2). -+ */ -+ if (of_machine_is_compatible("netgear,r7900") || -+ of_machine_is_compatible("netgear,r8000")) -+ sw_dev->cpu_port = 5; -+ - dev->enabled_ports |= BIT(sw_dev->cpu_port); - sw_dev->ports = fls(dev->enabled_ports); - diff --git a/target/linux/bcm53xx/patches-4.14/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-4.14/905-BCM53573-minor-hacks.patch deleted file mode 100644 index 39f4cf7662..0000000000 --- a/target/linux/bcm53xx/patches-4.14/905-BCM53573-minor-hacks.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Mon, 15 Aug 2016 10:30:41 +0200 -Subject: [PATCH] BCM53573 minor hacks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> ---- - ---- a/arch/arm/boot/dts/bcm53573.dtsi -+++ b/arch/arm/boot/dts/bcm53573.dtsi -@@ -53,6 +53,7 @@ - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; -+ clocks = <&ilp>; - }; - - clocks { ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -326,14 +326,6 @@ static int bcma_register_devices(struct - } - #endif - --#ifdef CONFIG_BCMA_SFLASH -- if (bus->drv_cc.sflash.present) { -- err = platform_device_register(&bcma_sflash_dev); -- if (err) -- bcma_err(bus, "Error registering serial flash\n"); -- } --#endif -- - #ifdef CONFIG_BCMA_NFLASH - if (bus->drv_cc.nflash.present) { - err = platform_device_register(&bcma_nflash_dev); -@@ -411,6 +403,14 @@ int bcma_bus_register(struct bcma_bus *b - bcma_register_core(bus, core); - } - -+#ifdef CONFIG_BCMA_SFLASH -+ if (bus->drv_cc.sflash.present) { -+ err = platform_device_register(&bcma_sflash_dev); -+ if (err) -+ bcma_err(bus, "Error registering serial flash\n"); -+ } -+#endif -+ - /* Try to get SPROM */ - err = bcma_sprom_get(bus); - if (err == -ENOENT) { ---- a/drivers/clocksource/arm_arch_timer.c -+++ b/drivers/clocksource/arm_arch_timer.c -@@ -17,6 +17,7 @@ - #include <linux/smp.h> - #include <linux/cpu.h> - #include <linux/cpu_pm.h> -+#include <linux/clk.h> - #include <linux/clockchips.h> - #include <linux/clocksource.h> - #include <linux/interrupt.h> -@@ -836,6 +837,16 @@ static void arch_timer_of_configure_rate - if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) - arch_timer_rate = rate; - -+ /* Get clk rate through clk driver if present */ -+ if (!arch_timer_rate) { -+ struct clk *clk = of_clk_get(np, 0); -+ -+ if (!IS_ERR(clk)) { -+ if (!clk_prepare_enable(clk)) -+ arch_timer_rate = clk_get_rate(clk); -+ } -+ } -+ - /* Check the timer frequency. */ - if (arch_timer_rate == 0) - pr_warn("frequency not available\n"); |