diff options
5 files changed, 179 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_oraybox_x3a.dts b/target/linux/ramips/dts/mt7621_oraybox_x3a.dts new file mode 100644 index 0000000000..a97b0900aa --- /dev/null +++ b/target/linux/ramips/dts/mt7621_oraybox_x3a.dts @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "oraybox,x3a", "mediatek,mt7621-soc"; + model = "OrayBox X3A"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_blue; + led-upgrade = &led_status_green; + label-mac-device = &gmac0; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status-red { + label = "red:status"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: status-blue { + label = "blue:status"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + led_status_green: status-green { + label = "green:status"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf00000>; + }; + + partition@fe0000 { + label = "bdinfo"; + reg = <0xfe0000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_9: macaddr@9 { + reg = <0x9 0x6>; + }; + }; + + partition@ff0000 { + label = "reserve"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_bdinfo_9>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan1"; + }; + + port@4 { + status = "okay"; + label = "wan"; + nvmem-cells = <&macaddr_bdinfo_9>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "wdt"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index e8bffaaa64..44870043b0 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1384,6 +1384,16 @@ define Device/netis_wf2881 endef TARGET_DEVICES += netis_wf2881 +define Device/oraybox_x3a + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 15360k + DEVICE_VENDOR := OrayBox + DEVICE_MODEL := X3A + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware +endef +TARGET_DEVICES += oraybox_x3a + define Device/phicomm_k2p $(Device/dsa-migration) IMAGE_SIZE := 15744k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index c0add4c88e..fc6e7ede3c 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -103,6 +103,10 @@ netgear,r7450) ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3" ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4" ;; +oraybox,x3a) + ucidef_set_led_netdev "wan" "wan link" "red:status" "wan" + ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan" + ;; tplink,archer-a6-v3|\ tplink,archer-c6-v3|\ tplink,archer-c6u-v1) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 7223908f95..1a914d8614 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -44,6 +44,7 @@ ramips_setup_interfaces() jcg,q20|\ lenovo,newifi-d1|\ mikrotik,routerboard-m33g|\ + oraybox,x3a|\ renkforce,ws-wn530hp3-a|\ xiaomi,mi-router-3g|\ xiaomi,mi-router-3g-v2|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index d018c1de1b..f2f6390c76 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -64,6 +64,12 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress ;; + oraybox,x3a) + if [ "$PHYNBR" = "1" ]; then + hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" + macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress + fi + ;; raisecom,msg1500-x-00) [ "$PHYNBR" = "0" ] && \ macaddr_setbit_la "$(mtd_get_mac_ascii Config protest_lan_mac)" \ |