diff options
6 files changed, 135 insertions, 0 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index bc02f4517c..c5f398ffc7 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -20,6 +20,7 @@ alfa-network,pi-wifi4|\ alfa-network,r36a|\ alfa-network,tube-2hq|\ allnet,all-wap02860ac|\ +araknis,an-300-ap-i-n|\ arduino,yun|\ buffalo,bhr-4grv2|\ devolo,magic-2-wifi|\ diff --git a/target/linux/ath79/dts/ar9344_araknis_an-300-ap-i-n.dts b/target/linux/ath79/dts/ar9344_araknis_an-300-ap-i-n.dts new file mode 100644 index 0000000000..a886b4c001 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_araknis_an-300-ap-i-n.dts @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9344.dtsi" +#include "ar934x_senao_loader.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "araknis,an-300-ap-i-n", "qca,ar9344"; + model = "Araknis AN-300-AP-I-N"; + + aliases { + label-mac-device = ð0; + led-boot = &led_power; + led-failsafe = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + reset { + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "amber:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wifi5g { + label = "blue:wifi5g"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wps { + label = "blue:wps"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + }; + + ath9k-leds { + compatible = "gpio-leds"; + + wifi2g { + label = "blue:wifi2g"; + gpios = <&ath9k 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +ð0 { + status = "okay"; + + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; + + phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; + + pll-data = <0x02000000 0x00000101 0x00001313>; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@0,0,0 { + compatible = "pci168c,0030"; + reg = <0x0 0 0 0 0>; + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + qca,disable-5ghz; + qca,no-eeprom; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&wmac { + status = "okay"; + + qca,disable-2ghz; + + mtd-cal-data = <&art 0x1000>; + + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <2>; +}; + +&art { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 86ce8f5bd7..41e52c6748 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -14,6 +14,7 @@ ath79_setup_interfaces() alfa-network,ap121f|\ alfa-network,pi-wifi4|\ alfa-network,tube-2hq|\ + araknis,an-300-ap-i-n|\ arduino,yun|\ aruba,ap-105|\ asus,rp-ac66|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 31b872e618..22e162692e 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -72,6 +72,7 @@ case "$FIRMWARE" in ;; "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in + araknis,an-300-ap-i-n|\ atheros,db120|\ engenius,eap600|\ engenius,ecb600|\ diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index 67e53c5fde..cf85196519 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -48,6 +48,7 @@ platform_do_upgrade() { redboot_fis_do_upgrade "$1" vmlinux_2 ;; allnet,all-wap02860ac|\ + araknis,an-300-ap-i-n|\ engenius,eap1200h|\ engenius,eap300-v2|\ engenius,eap600|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 27a9860d28..e6d4450bde 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -320,6 +320,17 @@ define Device/allnet_all-wap02860ac endef TARGET_DEVICES += allnet_all-wap02860ac +define Device/araknis_an-300-ap-i-n + $(Device/senao_loader_okli) + SOC := ar9344 + DEVICE_VENDOR := Araknis + DEVICE_MODEL := AN-300-AP-I-N + IMAGE_SIZE := 12096k + LOADER_FLASH_OFFS := 0x220000 + SENAO_IMGNAME := senao-an300 +endef +TARGET_DEVICES += araknis_an-300-ap-i-n + define Device/arduino_yun SOC := ar9331 DEVICE_VENDOR := Arduino |