diff options
5 files changed, 199 insertions, 0 deletions
diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index ac2f9de888..4363445114 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -154,6 +154,12 @@ define U-Boot/nanopi_m1_plus BUILD_DEVICES:=friendlyarm_nanopi-m1-plus endef +define U-Boot/zeropi + BUILD_SUBTARGET:=cortexa7 + NAME:=ZeroPi (H3) + BUILD_DEVICES:=friendlyarm_zeropi +endef + define U-Boot/nanopi_neo_air BUILD_SUBTARGET:=cortexa7 NAME:=U-Boot for NanoPi NEO Air (H3) @@ -299,6 +305,7 @@ UBOOT_TARGETS := \ Linksprite_pcDuino3 \ Lamobo_R1 \ nanopi_m1_plus \ + zeropi \ nanopi_neo \ nanopi_neo_air \ nanopi_neo_plus2 \ diff --git a/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch b/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch new file mode 100644 index 0000000000..4250e4e9db --- /dev/null +++ b/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch @@ -0,0 +1,81 @@ +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -539,7 +539,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ + sun8i-h3-orangepi-plus.dtb \ + sun8i-h3-orangepi-plus2e.dtb \ + sun8i-h3-orangepi-zero-plus2.dtb \ +- sun8i-h3-rervision-dvk.dtb ++ sun8i-h3-rervision-dvk.dtb \ ++ sun8i-h3-zeropi.dtb + dtb-$(CONFIG_MACH_SUN8I_R40) += \ + sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-v40-bananapi-m2-berry.dtb +--- /dev/null ++++ b/arch/arm/dts/sun8i-h3-zeropi.dts +@@ -0,0 +1,66 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "sun8i-h3-nanopi.dtsi" ++ ++/ { ++ model = "FriendlyElec ZeroPi"; ++ compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; ++ ++ aliases { ++ ethernet0 = &emac; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_nanopi>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; ++ }; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&pio { ++ gmac_power_pin_nanopi: gmac_power_pin@0 { ++ pins = "PD6"; ++ function = "gpio_out"; ++ }; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ status = "okay"; ++ dr_mode = "peripheral"; ++}; ++ ++&usbphy { ++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++}; diff --git a/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch b/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch new file mode 100644 index 0000000000..76e333298e --- /dev/null +++ b/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch @@ -0,0 +1,24 @@ +--- /dev/null ++++ b/configs/zeropi_defconfig +@@ -0,0 +1,21 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_MACH_SUN8I_H3=y ++CONFIG_DRAM_CLK=408 ++CONFIG_DRAM_ZQ=3881979 ++CONFIG_DRAM_ODT_EN=y ++CONFIG_MACPWR="PD6" ++# CONFIG_VIDEO_DE2 is not set ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-zeropi" ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_CONSOLE_MUX=y ++CONFIG_SPL=y ++CONFIG_SYS_CLK_FREQ=480000000 ++# CONFIG_CMD_IMLS is not set ++# CONFIG_CMD_FLASH is not set ++# CONFIG_CMD_FPGA is not set ++CONFIG_SUN8I_EMAC=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/target/linux/sunxi/image/cortexa7.mk b/target/linux/sunxi/image/cortexa7.mk index 083010ad8c..a48aa2e03c 100644 --- a/target/linux/sunxi/image/cortexa7.mk +++ b/target/linux/sunxi/image/cortexa7.mk @@ -47,6 +47,14 @@ define Device/friendlyarm_nanopi-neo-air endef TARGET_DEVICES += friendlyarm_nanopi-neo-air +define Device/friendlyarm_zeropi + DEVICE_VENDOR := FriendlyARM + DEVICE_MODEL := ZeroPi + DEVICE_PACKAGES := kmod-rtc-sunxi + SOC := sun8i-h3 +endef +TARGET_DEVICES += friendlyarm_zeropi + define Device/lamobo_lamobo-r1 DEVICE_VENDOR := Lamobo DEVICE_MODEL := Lamobo R1 diff --git a/target/linux/sunxi/patches-5.4/062-add-sun8i-h3-zeropi-support.patch b/target/linux/sunxi/patches-5.4/062-add-sun8i-h3-zeropi-support.patch new file mode 100644 index 0000000000..dc69f70bbe --- /dev/null +++ b/target/linux/sunxi/patches-5.4/062-add-sun8i-h3-zeropi-support.patch @@ -0,0 +1,79 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -1118,6 +1118,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-h3-orangepi-plus2e.dtb \ + sun8i-h3-orangepi-zero-plus2.dtb \ + sun8i-h3-rervision-dvk.dtb \ ++ sun8i-h3-zeropi.dtb \ + sun8i-r16-bananapi-m2m.dtb \ + sun8i-r16-nintendo-nes-classic.dtb \ + sun8i-r16-nintendo-super-nes-classic.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts +@@ -0,0 +1,66 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++#include "sun8i-h3-nanopi.dtsi" ++ ++/ { ++ model = "FriendlyElec ZeroPi"; ++ compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; ++ ++ aliases { ++ ethernet0 = &emac; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_nanopi>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; ++ }; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&pio { ++ gmac_power_pin_nanopi: gmac_power_pin@0 { ++ pins = "PD6"; ++ function = "gpio_out"; ++ }; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ status = "okay"; ++ dr_mode = "peripheral"; ++}; ++ ++&usbphy { ++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++}; |