diff options
-rw-r--r-- | target/linux/brcm63xx/base-files/etc/diag.sh | 4 | ||||
-rw-r--r-- | target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds | 6 | ||||
-rw-r--r-- | target/linux/brcm63xx/base-files/etc/uci-defaults/02_network | 3 | ||||
-rwxr-xr-x | target/linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 | ||||
-rw-r--r-- | target/linux/brcm63xx/dts/homehub2a.dts | 140 | ||||
-rwxr-xr-x | target/linux/brcm63xx/image/Makefile | 2 | ||||
-rw-r--r-- | target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch | 51 | ||||
-rw-r--r-- | target/linux/brcm63xx/profiles/bt.mk | 10 |
8 files changed, 218 insertions, 1 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh index 928c02ba10..03d98b9146 100644 --- a/target/linux/brcm63xx/base-files/etc/diag.sh +++ b/target/linux/brcm63xx/base-files/etc/diag.sh @@ -72,6 +72,10 @@ set_state() { fast2704v2) status_led="F@ST2704V2:green:power" ;; + homehub2a) + status_led="HOMEHUB2A:green:upgrading" + status_led2="HOMEHUB2A:blue:upgrading" + ;; gw6200) status_led="GW6200:green:line1" status_led2="GW6200:green:tel" diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds index c9bf2f412d..58404a165f 100644 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds @@ -34,6 +34,12 @@ hg556a_*) ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0" ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2" ;; +homehub2a) + ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1" + ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0" + ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1" + ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1" + ;; esac ucidef_commit_leds diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network index df4e29307b..814e1003cd 100644 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network @@ -66,7 +66,8 @@ v2500v_bb) dsl-274xb-c |\ hg553 |\ -hg556a_*) +hg556a_* |\ +homehub2a) ucidef_set_interface_lan "eth0.1" ucidef_add_switch "eth0" "1" "1" ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t" diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index 2c18762d19..9c8a612039 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -60,6 +60,9 @@ brcm63xx_dt_detect() { "Broadcom BCM96368MVWG reference board") board_name="bcm96368mvwg" ;; + "BT Home Hub 2.0 Type A") + board_name="homehub2a" + ;; "BT Voyager V2500V") board_name="v2500v" ;; diff --git a/target/linux/brcm63xx/dts/homehub2a.dts b/target/linux/brcm63xx/dts/homehub2a.dts new file mode 100644 index 0000000000..28de52871c --- /dev/null +++ b/target/linux/brcm63xx/dts/homehub2a.dts @@ -0,0 +1,140 @@ +/dts-v1/; + +/include/ "bcm6358.dtsi" + +/ { + model = "BT Home Hub 2.0 Type A"; + compatible = "thomson,homehub2a", "brcm,bcm6358"; + + spi-gpio { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-gpio"; + + gpio-mosi = <&gpio0 7 0>; + gpio-sck = <&gpio0 6 0>; + cs-gpios = <&gpio0 5 0>; + num-chipselects = <1>; + + hc595: gpio-spi-controller@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + debounce-interval = <60>; + + phone { + label = "phone"; + gpios = <&gpio0 1 1>; + linux,code = <169>; + }; + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 11 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_red { + label = "HOMEHUB2A:red:power"; + gpios = <&hc595 0 1>; + }; + power_green { + label = "HOMEHUB2A:green:power"; + gpios = <&hc595 1 1>; + default-state = "on"; + }; + power_blue { + label = "HOMEHUB2A:blue:power"; + gpios = <&hc595 2 1>; + }; + broadband_red { + label = "HOMEHUB2A:red:broadband"; + gpios = <&hc595 3 1>; + }; + broadband_green { + label = "HOMEHUB2A:green:broadband"; + gpios = <&hc595 4 1>; + }; + broadband_blue { + label = "HOMEHUB2A:blue:broadband"; + gpios = <&hc595 5 1>; + }; + wireless_red { + label = "HOMEHUB2A:red:wireless"; + gpios = <&hc595 6 1>; + }; + wireless_green { + label = "HOMEHUB2A:green:wireless"; + gpios = <&hc595 7 1>; + }; + wireless_blue { + label = "HOMEHUB2A:blue:wireless"; + gpios = <&hc595 8 1>; + }; + phone_red { + label = "HOMEHUB2A:red:phone"; + gpios = <&hc595 9 1>; + }; + phone_green { + label = "HOMEHUB2A:green:phone"; + gpios = <&hc595 10 1>; + }; + phone_blue { + label = "HOMEHUB2A:blue:phone"; + gpios = <&hc595 11 1>; + }; + upgrading_red { + label = "HOMEHUB2A:red:upgrading"; + gpios = <&hc595 12 1>; + }; + upgrading_green { + label = "HOMEHUB2A:green:upgrading"; + gpios = <&hc595 13 1>; + }; + upgrading_blue { + label = "HOMEHUB2A:blue:upgrading"; + gpios = <&hc595 14 1>; + }; + }; +}; + +&pflash { + status = "ok"; + + linux,part-probe = "bcm63xxpart"; + + cfe@0 { + label = "CFE"; + reg = <0x000000 0x020000>; + }; + + linux@20000 { + label = "linux"; + reg = <0x020000 0xfc0000>; + }; + + nvram@fe0000 { + label = "nvram"; + reg = <0xfe0000 0x020000>; + }; +}; diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile index a55fc46d6c..bae025f7d2 100755 --- a/target/linux/brcm63xx/image/Makefile +++ b/target/linux/brcm63xx/image/Makefile @@ -275,6 +275,8 @@ $(eval $(call ImageDTB,CFEDTB,RG100A,RG100A,rg100a,96358VW2,6358,--block-size 0x $(eval $(call ImageDTB,CFEDTB,AR1004G,AR1004G,ar1004g,96348GW-10,6348)) # Belkin F5D7633 $(eval $(call ImageDTB,CFEDTB,F5D7633,F5D7633,f5d7633,96348GW-10,6348,--block-size 0x20000 --image-offset 0x20000)) +# BT Home Hub 2.0 A +$(eval $(call ImageDTB,CFEDTB,BTHOMEHUB2A,HomeHub2A,homehub2a,HOMEHUB2A,6358,--image-offset 0x20000 --block-size 0x20000)) # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA $(eval $(call ImageDTB,CFEDTB,BTV2500V,BTV2500V,v2500v-bb,V2500V_BB,6348,--layoutver 5)) # Comtrend AR-5381u diff --git a/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch b/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch new file mode 100644 index 0000000000..2f3a02a677 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch @@ -0,0 +1,51 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1748,6 +1748,32 @@ + }, + }; + ++static struct board_info __initdata board_homehub2a = { ++ .name = "HOMEHUB2A", ++ .expected_cpu_id = 0x6358, ++ ++ .has_uart0 = 1, ++ .has_pci = 1, ++ .use_fallback_sprom = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .fallback_sprom = { ++ .type = SPROM_BCM4322, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_HW520 = { + .name = "HW6358GW_B", + .expected_cpu_id = 0x6358, +@@ -2748,6 +2774,7 @@ + &board_nb4_ser_r0, + &board_nb4_fxc_r1, + &board_ct6373_1, ++ &board_homehub2a, + &board_HW520, + &board_HW553, + &board_HW556_A, +@@ -2845,6 +2872,7 @@ + { .compatible = "sfr,nb4-fxc-r1", .data = &board_nb4_fxc_r1, }, + { .compatible = "t-com,spw303v", .data = &board_spw303v, }, + { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, ++ { .compatible = "thomson,homehub2a", .data = &board_homehub2a, }, + #endif + #ifdef CONFIG_BCM63XX_CPU_6362 + { .compatible = "sagem,f@st2504n", .data = &board_fast2504n, }, diff --git a/target/linux/brcm63xx/profiles/bt.mk b/target/linux/brcm63xx/profiles/bt.mk index 0863752412..3ca8fe16ff 100644 --- a/target/linux/brcm63xx/profiles/bt.mk +++ b/target/linux/brcm63xx/profiles/bt.mk @@ -5,6 +5,16 @@ # See /LICENSE for more information. # +define Profile/BTHOMEHUB2A + NAME:=BT Home Hub 2A + PACKAGES:=kmod-b43 wpad-mini \ + kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev +endef +define Profile/BTHOMEHUB2A/Description + Package set optimized for BTHOMEHUB2A. +endef +$(eval $(call Profile,BTHOMEHUB2A)) + define Profile/BTV2500V NAME:=BT Voyager V2500V PACKAGES:=kmod-b43 wpad-mini |