diff options
| -rw-r--r-- | docs/network.tex | 23 |
1 files changed, 22 insertions, 1 deletions
diff --git a/docs/network.tex b/docs/network.tex index 5516bd9a30..cf1200dcd4 100644 --- a/docs/network.tex +++ b/docs/network.tex @@ -107,7 +107,7 @@ The name for the route section is optional, the \texttt{interface}, \texttt{targ \texttt{gateway} options are mandatory. Leaving out the \texttt{netmask} option will turn the route into a host route. -\subsubsection{Setting up the switch (currently broadcom only)} +\subsubsection{Setting up the switch (broadcom only)} The switch configuration is set by adding a \texttt{'switch'} config section. Example: @@ -152,6 +152,27 @@ Three interfaces will be automatically created using this switch layout : You can then assign those interfaces to a custom network configuration name like \texttt{lan}, \texttt{wan} or \texttt{dmz} for instance. +\subsubsection{Setting up the switch (swconfig)} + +\emph{swconfig} based configurations have a different structure with one extra +section per vlan. The example below shows a typical configuration: + +\begin{Verbatim} +config 'switch' 'eth0' + option 'reset' '1' + option 'enable_vlan' '1' + +config 'switch_vlan' 'eth0_1' + option 'device' 'eth0' + option 'vlan' '1' + option 'ports' '0 1 2 3 5t' + +config 'switch_vlan' 'eth0_2' + option 'device' 'eth0' + option 'vlan' '2' + option 'ports' '4 5t' +\end{Verbatim} + \subsubsection{Setting up IPv6 connectivity} OpenWrt supports IPv6 connectivity using PPP, Tunnel brokers or static |