diff options
3 files changed, 214 insertions, 1 deletions
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch new file mode 100644 index 0000000000..9857dec9bd --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch @@ -0,0 +1,74 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Tue, 27 Jun 2017 19:35:27 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for each controller +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Northstar has 3 controllers: OHCI and EHCI (each with 2 ports) and XHCI +(with just 1 port). Describe them in the DT. In future this will allow +to reference them as trigger sources. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++ + 1 file changed, 34 insertions(+) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -272,6 +272,19 @@ + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ehci_port1: port@1 { ++ reg = <1>; ++ #trigger-source-cells = <0>; ++ }; ++ ++ ehci_port2: port@2 { ++ reg = <2>; ++ #trigger-source-cells = <0>; ++ }; + }; + + ohci: ohci@22000 { +@@ -280,6 +293,19 @@ + compatible = "generic-ohci"; + reg = <0x00022000 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ohci_port1: port@1 { ++ reg = <1>; ++ #trigger-source-cells = <0>; ++ }; ++ ++ ohci_port2: port@2 { ++ reg = <2>; ++ #trigger-source-cells = <0>; ++ }; + }; + }; + +@@ -300,6 +326,14 @@ + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy>; + phy-names = "usb"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ xhci_port1: port@1 { ++ reg = <1>; ++ #trigger-source-cells = <0>; ++ }; + }; + }; + diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch new file mode 100644 index 0000000000..c2195b1726 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch @@ -0,0 +1,139 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Wed, 2 Aug 2017 06:40:41 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few + devices +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings: +leds: document new trigger-sources property") to specify USB ports. Such an +information can be used by operating system to setup LEDs behavior. + +I updated dts files for 7 devices I own and I was able to test. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++ + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 +++ + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 ++++++ + arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++++ + arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 5 +++++ + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +++ + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +++ + 7 files changed, 28 insertions(+) + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -52,6 +52,10 @@ + usb { + label = "bcm53xx:blue:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>, ++ <&xhci_port1>, <&ohci_port2>, ++ <&ehci_port2>; ++ linux,default-trigger = "usbport"; + }; + + power0 { +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -48,6 +48,9 @@ + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>, ++ <&xhci_port1>; ++ linux,default-trigger = "usbport"; + }; + + wireless { +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -42,16 +42,22 @@ + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&ohci_port2>, <&ehci_port2>; ++ linux,default-trigger = "usbport"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&xhci_port1>; ++ linux,default-trigger = "usbport"; + }; + + usb3-green { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>; ++ linux,default-trigger = "usbport"; + }; + + wps { +--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts ++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +@@ -36,6 +36,8 @@ + usb2-port1 { + label = "bcm53xx:green:usb2-port1"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>; ++ linux,default-trigger = "usbport"; + }; + + power { +@@ -67,6 +69,8 @@ + usb2-port2 { + label = "bcm53xx:green:usb2-port2"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&ohci_port2>, <&ehci_port2>; ++ linux,default-trigger = "usbport"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -46,11 +46,16 @@ + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>, ++ <&xhci_port1>; ++ linux,default-trigger = "usbport"; + }; + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&ohci_port2>, <&ehci_port2>; ++ linux,default-trigger = "usbport"; + }; + + wan-blue { +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -71,6 +71,9 @@ + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>, ++ <&xhci_port1>; ++ linux,default-trigger = "usbport"; + }; + + 2ghz { +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -59,6 +59,9 @@ + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>, ++ <&xhci_port1>; ++ linux,default-trigger = "usbport"; + }; + + status { diff --git a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch index 425c420da7..39034997fc 100644 --- a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch +++ b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch @@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -98,6 +98,12 @@ +@@ -102,6 +102,12 @@ #address-cells = <1>; #size-cells = <0>; |