diff options
10 files changed, 279 insertions, 6 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 4bdb53db93..0767d8b40b 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -70,6 +70,9 @@ get_status_led() { dir-835-a1) status_led="d-link:amber:power" ;; + dlan-pro-500-wp) + status_led="devolo:green:wlan-2g" + ;; dragino2) status_led="dragino2:red:system" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 19814f4e4a..f740d3b407 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -150,6 +150,13 @@ dir-825-c1) ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt" ;; +dlan-pro-500-wp) + ucidef_set_led_default "power" "System Power" "devolo:green:status" "1" + ucidef_set_led_netdev "lan" "Ethernet Activity" "devolo:green:eth" "br-lan" + ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "devolo:green:wlan-2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none" + ;; + gl-inet) ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1" ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 4fe951e3ca..7212c5e63c 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -298,6 +298,10 @@ esr900) [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac" ;; +dlan-pro-500-wp) + ucidef_set_interface_lan "eth0 eth1" + ;; + all0305 |\ aw-nr580 |\ bullet-m |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 8f4bb409ff..c899bdad4e 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -414,6 +414,9 @@ ar71xx_board_detect() { *"DIR-835 rev. A1") name="dir-835-a1" ;; + *"dLAN pro 500 Wireless+") + name="dlan-pro-500-wp" + ;; *"Dragino v2") name="dragino2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index ade47fb852..15560c4c53 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -207,6 +207,7 @@ platform_check_image() { dir-615-e4 | \ dir-825-c1 | \ dir-835-a1 | \ + dlan-pro-500-wp | \ dragino2 | \ esr1750 | \ esr900 | \ diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18 index 05c98ebf69..3b100e9ac9 100644 --- a/target/linux/ar71xx/config-3.18 +++ b/target/linux/ar71xx/config-3.18 @@ -53,6 +53,7 @@ CONFIG_ATH79_MACH_DIR_600_A1=y CONFIG_ATH79_MACH_DIR_615_C1=y CONFIG_ATH79_MACH_DIR_825_B1=y CONFIG_ATH79_MACH_DIR_825_C1=y +CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y CONFIG_ATH79_MACH_DRAGINO2=y CONFIG_ATH79_MACH_EAP300V2=y CONFIG_ATH79_MACH_EAP7660D=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c new file mode 100644 index 0000000000..ae6f443dcb --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c @@ -0,0 +1,203 @@ +/* + * devolo dLAN pro 500 Wireless+ support + * + * Copyright (c) 2013-2015 devolo AG + * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> +#include <linux/gpio.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE 13 +#define DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE 17 +#define DLAN_PRO_500_WP_GPIO_LED_WLAN_5G 11 +#define DLAN_PRO_500_WP_GPIO_LED_WLAN_2G 12 +#define DLAN_PRO_500_WP_GPIO_LED_STATUS 16 +#define DLAN_PRO_500_WP_GPIO_LED_ETH 14 + +#define DLAN_PRO_500_WP_GPIO_BTN_WPS 20 +#define DLAN_PRO_500_WP_GPIO_BTN_WLAN 22 +#define DLAN_PRO_500_WP_GPIO_BTN_DLAN 21 +#define DLAN_PRO_500_WP_GPIO_BTN_RESET 4 + +#define DLAN_PRO_500_WP_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_PRO_500_WP_KEYS_POLL_INTERVAL) + +#define DLAN_PRO_500_WP_ART_ADDRESS 0x1fff0000 +#define DLAN_PRO_500_WP_CALDATA_OFFSET 0x1000 +#define DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET 0x1002 +#define DLAN_PRO_500_WP_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led dlan_pro_500_wp_leds_gpio[] __initdata = { + { + .name = "devolo:green:status", + .gpio = DLAN_PRO_500_WP_GPIO_LED_STATUS, + .active_low = 1, + }, + { + .name = "devolo:green:eth", + .gpio = DLAN_PRO_500_WP_GPIO_LED_ETH, + .active_low = 1, + }, + { + .name = "devolo:blue:wlan-5g", + .gpio = DLAN_PRO_500_WP_GPIO_LED_WLAN_5G, + .active_low = 1, + }, + { + .name = "devolo:green:wlan-2g", + .gpio = DLAN_PRO_500_WP_GPIO_LED_WLAN_2G, + .active_low = 1, + } +}; + +static struct gpio_keys_button dlan_pro_500_wp_gpio_keys[] __initdata = { + { + .desc = "dLAN button", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL, + .gpio = DLAN_PRO_500_WP_GPIO_BTN_DLAN, + .active_low = 0, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL, + .gpio = DLAN_PRO_500_WP_GPIO_BTN_WPS, + .active_low = 0, + }, + { + .desc = "WLAN button", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL, + .gpio = DLAN_PRO_500_WP_GPIO_BTN_WLAN, + .active_low = 1, + }, + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL, + .gpio = DLAN_PRO_500_WP_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct ar8327_pad_cfg dlan_pro_500_wp_ar8327_pad0_cfg = { + .mode = AR8327_PAD_PHY_RGMII, + .txclk_delay_en = false, + .rxclk_delay_en = false, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL0, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, +}; + +static struct ar8327_led_cfg dlan_pro_500_wp_ar8327_led_cfg = { + .led_ctrl0 = 0x00000000, + .led_ctrl1 = 0xc737c737, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x00c30c00, + .open_drain = true, +}; + +static struct ar8327_platform_data dlan_pro_500_wp_ar8327_data = { + .pad0_cfg = &dlan_pro_500_wp_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 0, + .rxpause = 0, + }, + .led_cfg = &dlan_pro_500_wp_ar8327_led_cfg, +}; + +static struct mdio_board_info dlan_pro_500_wp_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &dlan_pro_500_wp_ar8327_data, + }, +}; + +static void __init dlan_pro_500_wp_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_500_WP_ART_ADDRESS); + u8 *cal = art + DLAN_PRO_500_WP_CALDATA_OFFSET; + u8 *wifi_mac = art + DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET; + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_500_wp_leds_gpio), + dlan_pro_500_wp_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DLAN_PRO_500_WP_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dlan_pro_500_wp_gpio_keys), + dlan_pro_500_wp_gpio_keys); + + gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "PLC power"); + gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "PLC LEDs"); + + ath79_register_wmac(cal, wifi_mac); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + ath79_register_mdio(1, 0x0); + ath79_register_mdio(0, 0x0); + + mdiobus_register_board_info(dlan_pro_500_wp_mdio0_info, + ARRAY_SIZE(dlan_pro_500_wp_mdio0_info)); + + /* GMAC0 is connected to a AR7400 PLC in PHY mode */ + ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_pll_data.pll_1000 = 0x0e000000; + ath79_eth0_data.speed = SPEED_1000; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_register_eth(0); + + /* GMAC1 is connected to the internal switch */ + ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 1); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_DLAN_PRO_500_WP, "dLAN-pro-500-wp", "devolo dLAN pro 500 Wireless+", + dlan_pro_500_wp_setup); diff --git a/target/linux/ar71xx/generic/profiles/devolo-dlan.mk b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk new file mode 100644 index 0000000000..281c04c47e --- /dev/null +++ b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk @@ -0,0 +1,19 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/dLAN_pro_500_wp + NAME:=devolo dLAN pro 500 Wireless+ + PACKAGES:=open-plc-utils open-plc-utils-chkpib open-plc-utils-getpib open-plc-utils-modpib \ + open-plc-utils-setpib open-plc-utils-hpavkey open-plc-utils-amphost \ + open-plc-utils-plctool open-plc-utils-pibdump open-plc-utils-plcstat \ + ebtables hostapd-utils wifitoggle wpad +endef + +define Profile/dLAN_pro_500_wp/Description + Package set optimized for the devolo dLAN pro 500 Wireless+. +endef +$(eval $(call Profile,dLAN_pro_500_wp)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index a2a66b80b0..e0830eaca0 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -926,6 +926,7 @@ cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product- eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro +dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k@0x70000(kernel),6528k(rootfs),7680k@0x70000(firmware),64k(art)ro cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) @@ -1136,6 +1137,22 @@ Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap12 Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000) Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) +define Image/Build/dLAN + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) + if [ -e "$(call factoryname,$(1),$(2))" ]; then \ + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ + of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \ + dd if=$(KDIR)/root.$(1) \ + of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ + fi +endef + +Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) +Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) define Image/Build/Ath $(eval fwsize=$(call mtdpartsize,firmware,$(4))) @@ -1858,6 +1875,8 @@ $(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01)) $(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) +$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) root=31:5 mem=128M,KRuImage)) + $(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e)) $(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61)) diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch index d6b6aab052..3047e61b89 100644 --- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,192 @@ +@@ -16,22 +16,193 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -38,6 +38,7 @@ + ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ + ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ + ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ ++ ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ + ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ + ATH79_MACH_ESR900, /* EnGenius ESR900 */ + ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ @@ -266,7 +267,7 @@ config ATH79_MACH_AP121 bool "Atheros AP121 reference board" select SOC_AR933X -@@ -11,62 +75,996 @@ config ATH79_MACH_AP121 +@@ -11,62 +75,1007 @@ config ATH79_MACH_AP121 select ATH79_DEV_M25P80 select ATH79_DEV_USB select ATH79_DEV_WMAC @@ -603,6 +604,17 @@ + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_DLAN_PRO_500_WP ++ bool "devolo dLAN pro 500 Wireless+ support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ +config ATH79_MACH_DRAGINO2 + bool "DRAGINO V2 support" + select SOC_AR933X @@ -1291,7 +1303,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" -@@ -83,6 +1081,97 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +1103,97 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -1389,7 +1401,7 @@ endmenu config SOC_AR71XX -@@ -124,7 +1213,10 @@ config ATH79_DEV_DSA +@@ -124,7 +1235,10 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -1401,7 +1413,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -154,6 +1246,11 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -154,6 +1268,11 @@ config ATH79_PCI_ATH9K_FIXUP def_bool n config ATH79_ROUTERBOOT @@ -1415,7 +1427,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,121 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,122 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -1436,6 +1448,7 @@ +obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o +obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o ++obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o +obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o +obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o |