nuke unneeded patchsets as well

SVN-Revision: 25145

20 files changed, 0 insertions, 24132 deletions

diff --git a/toolchain/gcc/patches/4.1.2/010-pr34130.patch b/toolchain/gcc/patches/4.1.2/010-pr34130.patch
deleted file mode 100644
index bc959cb730..0000000000
--- a/toolchain/gcc/patches/4.1.2/010-pr34130.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/gcc/fold-const.c
-+++ b/gcc/fold-const.c
-@@ -5339,7 +5339,10 @@ extract_muldiv_1 (tree t, tree c, enum t
-             }
-           break;
-         }
--      /* FALLTHROUGH */
-+   /* If the constant is negative, we cannot simplify this.  */
-+   if (tree_int_cst_sgn (c) == -1)
-+     break;
-+   /* FALLTHROUGH */
-     case NEGATE_EXPR:
-       if ((t1 = extract_muldiv (op0, c, code, wide_type)) != 0)
- 	return fold_build1 (tcode, ctype, fold_convert (ctype, t1));
diff --git a/toolchain/gcc/patches/4.1.2/100-uclibc-conf.patch b/toolchain/gcc/patches/4.1.2/100-uclibc-conf.patch
deleted file mode 100644
index 48d8e36c08..0000000000
--- a/toolchain/gcc/patches/4.1.2/100-uclibc-conf.patch
+++ /dev/null
@@ -1,544 +0,0 @@
---- /dev/null
-+++ b/gcc/config/t-linux-uclibc
-@@ -0,0 +1,5 @@
-+# Remove glibc specific files added in t-linux
-+SHLIB_MAPFILES := $(filter-out $(srcdir)/config/libgcc-glibc.ver, $(SHLIB_MAPFILES))
-+
-+# Use unwind-dw2-fde instead of unwind-dw2-fde-glibc
-+LIB2ADDEH := $(subst unwind-dw2-fde-glibc.c,unwind-dw2-fde.c,$(LIB2ADDEH))
---- a/gcc/config.gcc
-+++ b/gcc/config.gcc
-@@ -1884,7 +1884,7 @@ s390x-ibm-tpf*)
- 	;;
- sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
- sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
--  sh-*-linux* | sh[346lbe]*-*-linux* | \
-+  sh*-*-linux* | sh[346lbe]*-*-linux* | \
-   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
-    sh64-*-netbsd* | sh64l*-*-netbsd*)
- 	tmake_file="${tmake_file} sh/t-sh sh/t-elf"
-@@ -2338,6 +2338,12 @@ m32c-*-elf*)
- 	;;
- esac
- 
-+# Rather than hook into each target, just do it after all the linux
-+# targets have been processed
-+case ${target} in
-+*-linux-uclibc*) tm_defines="${tm_defines} USE_UCLIBC" ; tmake_file="${tmake_file} t-linux-uclibc"
-+esac
-+
- case ${target} in
- i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
- 	tmake_file="${tmake_file} i386/t-gmm_malloc"
---- a/boehm-gc/configure
-+++ b/boehm-gc/configure
-@@ -4320,6 +4320,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- a/configure
-+++ b/configure
-@@ -1133,7 +1133,7 @@ no)
-     ;;
- "")
-     case "${target}" in
--    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
-+    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu | *-*-linux-uclibc*)
-         # Enable libmudflap by default in GNU and friends.
- 	;;
-     *-*-freebsd*)
---- a/configure.in
-+++ b/configure.in
-@@ -341,7 +341,7 @@ no)
-     ;;
- "")
-     case "${target}" in
--    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
-+    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu | *-*-linux-uclibc*)
-         # Enable libmudflap by default in GNU and friends.
- 	;;
-     *-*-freebsd*)
---- a/contrib/regression/objs-gcc.sh
-+++ b/contrib/regression/objs-gcc.sh
-@@ -105,6 +105,10 @@ if [ $H_REAL_TARGET = $H_REAL_HOST -a $H
-  then
-   make all-gdb all-dejagnu all-ld || exit 1
-   make install-gdb install-dejagnu install-ld || exit 1
-+elif [ $H_REAL_TARGET = $H_REAL_HOST -a $H_REAL_TARGET = i686-pc-linux-uclibc ]
-+ then
-+  make all-gdb all-dejagnu all-ld || exit 1
-+  make install-gdb install-dejagnu install-ld || exit 1
- elif [ $H_REAL_TARGET = $H_REAL_HOST ] ; then
-   make bootstrap || exit 1
-   make install || exit 1
---- a/gcc/config/alpha/linux-elf.h
-+++ b/gcc/config/alpha/linux-elf.h
-@@ -27,7 +27,11 @@ Boston, MA 02110-1301, USA.  */
- #define SUBTARGET_EXTRA_SPECS \
- { "elf_dynamic_linker", ELF_DYNAMIC_LINKER },
- 
-+#if defined USE_UCLIBC
-+#define ELF_DYNAMIC_LINKER	"/lib/ld-uClibc.so.0"
-+#else
- #define ELF_DYNAMIC_LINKER	"/lib/ld-linux.so.2"
-+#endif
- 
- #define LINK_SPEC "-m elf64alpha %{G*} %{relax:-relax}		\
-   %{O*:-O3} %{!O*:-O1}						\
---- a/gcc/config/arm/linux-elf.h
-+++ b/gcc/config/arm/linux-elf.h
-@@ -51,7 +51,11 @@
- 
- #define LIBGCC_SPEC "%{msoft-float:-lfloat} %{mfloat-abi=soft*:-lfloat} -lgcc"
- 
-+#ifdef USE_UCLIBC
-+#define LINUX_TARGET_INTERPRETER "/lib/ld-uClibc.so.0"
-+#else
- #define LINUX_TARGET_INTERPRETER "/lib/ld-linux.so.2"
-+#endif
- 
- #define LINUX_TARGET_LINK_SPEC  "%{h*} %{version:-v} \
-    %{b} \
---- a/gcc/config/cris/linux.h
-+++ b/gcc/config/cris/linux.h
-@@ -73,6 +73,25 @@ Boston, MA 02110-1301, USA.  */
- #undef CRIS_DEFAULT_CPU_VERSION
- #define CRIS_DEFAULT_CPU_VERSION CRIS_CPU_NG
- 
-+#ifdef USE_UCLIBC
-+
-+#undef CRIS_SUBTARGET_VERSION
-+#define CRIS_SUBTARGET_VERSION " - cris-axis-linux-uclibc"
-+
-+#undef CRIS_LINK_SUBTARGET_SPEC
-+#define CRIS_LINK_SUBTARGET_SPEC \
-+ "-mcrislinux\
-+  -rpath-link include/asm/../..%s\
-+  %{shared} %{static}\
-+  %{symbolic:-Bdynamic} %{shlib:-Bdynamic} %{static:-Bstatic}\
-+  %{!shared: \
-+    %{!static: \
-+      %{rdynamic:-export-dynamic} \
-+      %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}}} \
-+  %{!r:%{O2|O3: --gc-sections}}"
-+
-+#else  /* USE_UCLIBC */
-+
- #undef CRIS_SUBTARGET_VERSION
- #define CRIS_SUBTARGET_VERSION " - cris-axis-linux-gnu"
- 
-@@ -87,6 +106,8 @@ Boston, MA 02110-1301, USA.  */
-   %{!shared:%{!static:%{rdynamic:-export-dynamic}}}\
-   %{!r:%{O2|O3: --gc-sections}}"
- 
-+#endif  /* USE_UCLIBC */
-+
- 
- /* Node: Run-time Target */
- 
---- a/gcc/config/i386/linux.h
-+++ b/gcc/config/i386/linux.h
-@@ -107,6 +107,11 @@ Boston, MA 02110-1301, USA.  */
- #define LINK_EMULATION "elf_i386"
- #define DYNAMIC_LINKER "/lib/ld-linux.so.2"
- 
-+#if defined USE_UCLIBC
-+#undef DYNAMIC_LINKER
-+#define DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
-+#endif
-+
- #undef  SUBTARGET_EXTRA_SPECS
- #define SUBTARGET_EXTRA_SPECS \
-   { "link_emulation", LINK_EMULATION },\
---- a/gcc/config/i386/linux64.h
-+++ b/gcc/config/i386/linux64.h
-@@ -54,14 +54,21 @@ Boston, MA 02110-1301, USA.  */
-    When the -shared link option is used a final link is not being
-    done.  */
- 
-+#ifdef USE_UCLIBC
-+#define ELF32_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
-+#define ELF64_DYNAMIC_LINKER "/lib/ld64-uClibc.so.0"
-+#else
-+#define ELF32_DYNAMIC_LINKER "/lib/ld-linux.so.2"
-+#define ELF64_DYNAMIC_LINKER "/lib64/ld-linux-x86-64.so.2"
-+#endif
- #undef	LINK_SPEC
- #define LINK_SPEC "%{!m32:-m elf_x86_64} %{m32:-m elf_i386} \
-   %{shared:-shared} \
-   %{!shared: \
-     %{!static: \
-       %{rdynamic:-export-dynamic} \
--      %{m32:%{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} \
--      %{!m32:%{!dynamic-linker:-dynamic-linker /lib64/ld-linux-x86-64.so.2}}} \
-+      %{m32:%{!dynamic-linker:-dynamic-linker " ELF32_DYNAMIC_LINKER "}} \
-+      %{!m32:%{!dynamic-linker:-dynamic-linker " ELF64_DYNAMIC_LINKER "}}} \
-     %{static:-static}}"
- 
- /* Similar to standard Linux, but adding -ffast-math support.  */
---- a/gcc/config/ia64/linux.h
-+++ b/gcc/config/ia64/linux.h
-@@ -37,13 +37,18 @@ do {						\
- /* Define this for shared library support because it isn't in the main
-    linux.h file.  */
- 
-+#ifdef USE_UCLIBC
-+#define ELF_DYNAMIC_LINKER	"/lib/ld-uClibc.so.0"
-+#else
-+#define ELF_DYNAMIC_LINKER "/lib/ld-linux-ia64.so.2"
-+#endif
- #undef LINK_SPEC
- #define LINK_SPEC "\
-   %{shared:-shared} \
-   %{!shared: \
-     %{!static: \
-       %{rdynamic:-export-dynamic} \
--      %{!dynamic-linker:-dynamic-linker /lib/ld-linux-ia64.so.2}} \
-+      %{!dynamic-linker:-dynamic-linker " ELF_DYNAMIC_LINKER "}} \
-       %{static:-static}}"
- 
- #define CPP_SPEC "%{posix:-D_POSIX_SOURCE} %{pthread:-D_REENTRANT}"
---- a/gcc/config/m68k/linux.h
-+++ b/gcc/config/m68k/linux.h
-@@ -123,12 +123,17 @@ Boston, MA 02110-1301, USA.  */
- 
- /* If ELF is the default format, we should not use /lib/elf.  */
- 
-+#ifdef USE_UCLIBC
-+#define ELF_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
-+#else
-+#define ELF_DYNAMIC_LINKER "/lib/ld.so.1"
-+#endif
- #undef	LINK_SPEC
- #define LINK_SPEC "-m m68kelf %{shared} \
-   %{!shared: \
-     %{!static: \
-       %{rdynamic:-export-dynamic} \
--      %{!dynamic-linker*:-dynamic-linker /lib/ld.so.1}} \
-+      %{!dynamic-linker*:-dynamic-linker " ELF_DYNAMIC_LINKER "}} \
-     %{static}}"
- 
- /* For compatibility with linux/a.out */
---- a/gcc/config/mips/linux.h
-+++ b/gcc/config/mips/linux.h
-@@ -105,6 +105,11 @@ Boston, MA 02110-1301, USA.  */
- 
- /* Borrowed from sparc/linux.h */
- #undef LINK_SPEC
-+#ifdef USE_UCLIBC
-+#define ELF_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
-+#else
-+#define ELF_DYNAMIC_LINKER "/lib/ld.so.1"
-+#endif
- #define LINK_SPEC \
-  "%(endian_spec) \
-   %{shared:-shared} \
-@@ -112,7 +117,7 @@ Boston, MA 02110-1301, USA.  */
-     %{!ibcs: \
-       %{!static: \
-         %{rdynamic:-export-dynamic} \
--        %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}} \
-+        %{!dynamic-linker:-dynamic-linker " ELF_DYNAMIC_LINKER "}} \
-         %{static:-static}}}"
- 
- #undef SUBTARGET_ASM_SPEC
---- a/gcc/config/pa/pa-linux.h
-+++ b/gcc/config/pa/pa-linux.h
-@@ -49,13 +49,18 @@ Boston, MA 02110-1301, USA.  */
- /* Define this for shared library support because it isn't in the main
-    linux.h file.  */
- 
-+#ifdef USE_UCLIBC
-+#define ELF_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
-+#else
-+#define ELF_DYNAMIC_LINKER "/lib/ld.so.1"
-+#endif
- #undef LINK_SPEC
- #define LINK_SPEC "\
-   %{shared:-shared} \
-   %{!shared: \
-     %{!static: \
-       %{rdynamic:-export-dynamic} \
--      %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}} \
-+      %{!dynamic-linker:-dynamic-linker " ELF_DYNAMIC_LINKER "}} \
-       %{static:-static}}"
- 
- /* glibc's profiling functions don't need gcc to allocate counters.  */
---- a/gcc/config/rs6000/linux.h
-+++ b/gcc/config/rs6000/linux.h
-@@ -72,7 +72,11 @@
- #define LINK_START_DEFAULT_SPEC "%(link_start_linux)"
- 
- #undef	LINK_OS_DEFAULT_SPEC
-+#ifdef USE_UCLIBC
-+#define LINK_OS_DEFAULT_SPEC "%(link_os_linux_uclibc)"
-+#else
- #define LINK_OS_DEFAULT_SPEC "%(link_os_linux)"
-+#endif
- 
- #define LINK_GCC_C_SEQUENCE_SPEC \
-   "%{static:--start-group} %G %L %{static:--end-group}%{!static:%G}"
---- a/gcc/config/rs6000/sysv4.h
-+++ b/gcc/config/rs6000/sysv4.h
-@@ -866,6 +866,7 @@ extern int fixuplabelno;
-   mcall-linux  : %(link_os_linux)       ; \
-   mcall-gnu    : %(link_os_gnu)         ; \
-   mcall-netbsd : %(link_os_netbsd)      ; \
-+  mcall-linux-uclibc : %(link_os_linux_uclibc); \
-   mcall-openbsd: %(link_os_openbsd)     ; \
-                : %(link_os_default)     }"
- 
-@@ -1043,6 +1044,10 @@ extern int fixuplabelno;
-   %{rdynamic:-export-dynamic} \
-   %{!dynamic-linker:-dynamic-linker /lib/ld.so.1}}}"
- 
-+#define LINK_OS_LINUX_UCLIBC_SPEC "-m elf32ppclinux %{!shared: %{!static: \
-+  %{rdynamic:-export-dynamic} \
-+  %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}}}"
-+
- #if defined(HAVE_LD_EH_FRAME_HDR)
- # define LINK_EH_SPEC "%{!static:--eh-frame-hdr} "
- #endif
-@@ -1209,6 +1214,7 @@ ncrtn.o%s"
-   { "link_os_sim",		LINK_OS_SIM_SPEC },			\
-   { "link_os_freebsd",		LINK_OS_FREEBSD_SPEC },			\
-   { "link_os_linux",		LINK_OS_LINUX_SPEC },			\
-+  { "link_os_linux_uclibc",	LINK_OS_LINUX_UCLIBC_SPEC },		\
-   { "link_os_gnu",		LINK_OS_GNU_SPEC },			\
-   { "link_os_netbsd",		LINK_OS_NETBSD_SPEC },			\
-   { "link_os_openbsd",		LINK_OS_OPENBSD_SPEC },			\
---- a/gcc/config/s390/linux.h
-+++ b/gcc/config/s390/linux.h
-@@ -77,6 +77,13 @@ Software Foundation, 51 Franklin Street,
- #define MULTILIB_DEFAULTS { "m31" }
- #endif
- 
-+#ifdef USE_UCLIBC
-+#define ELF31_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
-+#define ELF64_DYNAMIC_LINKER "/lib/ld64-uClibc.so.0"
-+#else
-+#define ELF31_DYNAMIC_LINKER "/lib/ld.so.1"
-+#define ELF64_DYNAMIC_LINKER "/lib/ld64.so.1"
-+#endif
- #undef  LINK_SPEC
- #define LINK_SPEC \
-   "%{m31:-m elf_s390}%{m64:-m elf64_s390} \
-@@ -86,8 +93,8 @@ Software Foundation, 51 Franklin Street,
-       %{!static: \
- 	%{rdynamic:-export-dynamic} \
- 	%{!dynamic-linker: \
--          %{m31:-dynamic-linker /lib/ld.so.1} \
--          %{m64:-dynamic-linker /lib/ld64.so.1}}}}"
-+          %{m31:-dynamic-linker " ELF31_DYNAMIC_LINKER "} \
-+          %{m64:-dynamic-linker " ELF64_DYNAMIC_LINKER "}}}}"
- 
- #define CPP_SPEC "%{posix:-D_POSIX_SOURCE} %{pthread:-D_REENTRANT}"
- 
---- a/gcc/config/sh/linux.h
-+++ b/gcc/config/sh/linux.h
-@@ -56,12 +56,21 @@ Boston, MA 02110-1301, USA.  */
- #undef SUBTARGET_LINK_EMUL_SUFFIX
- #define SUBTARGET_LINK_EMUL_SUFFIX "_linux"
- #undef SUBTARGET_LINK_SPEC
-+#ifdef USE_UCLIBC
-+#define SUBTARGET_LINK_SPEC \
-+  "%{shared:-shared} \
-+   %{!static: \
-+     %{rdynamic:-export-dynamic} \
-+     %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0}} \
-+   %{static:-static}"
-+#else
- #define SUBTARGET_LINK_SPEC \
-   "%{shared:-shared} \
-    %{!static: \
-      %{rdynamic:-export-dynamic} \
-      %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} \
-    %{static:-static}"
-+#endif
- 
- /* Output assembler code to STREAM to call the profiler.  */
- 
---- a/gcc/config/sparc/linux.h
-+++ b/gcc/config/sparc/linux.h
-@@ -125,6 +125,11 @@ Boston, MA 02110-1301, USA.  */
- 
- /* If ELF is the default format, we should not use /lib/elf.  */
- 
-+#ifdef USE_UCLIBC
-+#define ELF_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
-+#else
-+#define ELF_DYNAMIC_LINKER "/lib/ld-linux.so.2"
-+#endif
- #undef  LINK_SPEC
- #define LINK_SPEC "-m elf32_sparc -Y P,/usr/lib %{shared:-shared} \
-   %{!mno-relax:%{!r:-relax}} \
-@@ -132,7 +137,7 @@ Boston, MA 02110-1301, USA.  */
-     %{!ibcs: \
-       %{!static: \
-         %{rdynamic:-export-dynamic} \
--        %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} \
-+        %{!dynamic-linker:-dynamic-linker " ELF_DYNAMIC_LINKER "}} \
-         %{static:-static}}}"
- 
- /* The sun bundled assembler doesn't accept -Yd, (and neither does gas).
---- a/gcc/config/sparc/linux64.h
-+++ b/gcc/config/sparc/linux64.h
-@@ -162,12 +162,17 @@ Boston, MA 02110-1301, USA.  */
-   { "link_arch_default", LINK_ARCH_DEFAULT_SPEC },	  \
-   { "link_arch",	 LINK_ARCH_SPEC },
-     
-+#ifdef USE_UCLIBC
-+#define ELF_DYNAMIC_LINKER	"/lib/ld-uClibc.so.0"
-+#else
-+#define ELF_DYNAMIC_LINKER  "/lib/ld-linux.so.2"
-+#endif
- #define LINK_ARCH32_SPEC "-m elf32_sparc -Y P,/usr/lib %{shared:-shared} \
-   %{!shared: \
-     %{!ibcs: \
-       %{!static: \
-         %{rdynamic:-export-dynamic} \
--        %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} \
-+        %{!dynamic-linker:-dynamic-linker " ELF_DYNAMIC_LINKER "}} \
-         %{static:-static}}} \
- "
- 
---- a/libffi/configure
-+++ b/libffi/configure
-@@ -3457,6 +3457,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- a/libgfortran/configure
-+++ b/libgfortran/configure
-@@ -3699,6 +3699,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- a/libjava/configure
-+++ b/libjava/configure
-@@ -5137,6 +5137,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- a/libmudflap/configure
-+++ b/libmudflap/configure
-@@ -5382,6 +5382,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- a/libobjc/configure
-+++ b/libobjc/configure
-@@ -3312,6 +3312,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
---- a/libtool.m4
-+++ b/libtool.m4
-@@ -743,6 +743,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
---- a/ltconfig
-+++ b/ltconfig
-@@ -603,6 +603,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-
- 
- # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
- case $host_os in
-+linux-uclibc*) ;;
- linux-gnu*) ;;
- linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
- esac
-@@ -1274,6 +1275,23 @@ linux-gnu*)
-   dynamic_linker='GNU/Linux ld.so'
-   ;;
- 
-+linux-uclibc*)
-+  version_type=linux
-+  need_lib_prefix=no
-+  need_version=no
-+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-+  soname_spec='${libname}${release}.so$major'
-+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-+  shlibpath_var=LD_LIBRARY_PATH
-+  shlibpath_overrides_runpath=no
-+  # This implies no fast_install, which is unacceptable.
-+  # Some rework will be needed to allow for fast_install
-+  # before this can be enabled.
-+  hardcode_into_libs=yes
-+  # Assume using the uClibc dynamic linker.
-+  dynamic_linker="uClibc ld.so"
-+  ;;
-+
- netbsd*)
-   need_lib_prefix=no
-   need_version=no
---- a/zlib/configure
-+++ b/zlib/configure
-@@ -3426,6 +3426,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
diff --git a/toolchain/gcc/patches/4.1.2/110-arm-eabi.patch b/toolchain/gcc/patches/4.1.2/110-arm-eabi.patch
deleted file mode 100644
index 2f2d93539a..0000000000
--- a/toolchain/gcc/patches/4.1.2/110-arm-eabi.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/gcc/config.gcc
-+++ b/gcc/config.gcc
-@@ -674,7 +674,7 @@ arm*-*-linux*)			# ARM GNU/Linux with EL
- 	tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" 
- 	tmake_file="${tmake_file} t-linux arm/t-arm"
- 	case ${target} in
--	arm*-*-linux-gnueabi)
-+	arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
- 	    tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
- 	    tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
-   	    # The BPABI long long divmod functions return a 128-bit value in 
---- a/gcc/config/arm/linux-eabi.h
-+++ b/gcc/config/arm/linux-eabi.h
-@@ -53,7 +53,11 @@
- /* Use ld-linux.so.3 so that it will be possible to run "classic"
-    GNU/Linux binaries on an EABI system.  */
- #undef LINUX_TARGET_INTERPRETER
-+#ifdef USE_UCLIBC
-+#define LINUX_TARGET_INTERPRETER "/lib/ld-uClibc.so.0"
-+#else
- #define LINUX_TARGET_INTERPRETER "/lib/ld-linux.so.3"
-+#endif
- 
- /* At this point, bpabi.h will have clobbered LINK_SPEC.  We want to
-    use the GNU/Linux version, not the generic BPABI version.  */
diff --git a/toolchain/gcc/patches/4.1.2/120-cris-do_not_overide_limits_h_test.patch b/toolchain/gcc/patches/4.1.2/120-cris-do_not_overide_limits_h_test.patch
deleted file mode 100644
index 81cffb4a7e..0000000000
--- a/toolchain/gcc/patches/4.1.2/120-cris-do_not_overide_limits_h_test.patch
+++ /dev/null
@@ -1,9 +0,0 @@
---- a/gcc/config/cris/t-linux
-+++ b/gcc/config/cris/t-linux
-@@ -1,6 +1,2 @@
- TARGET_LIBGCC2_CFLAGS += -fPIC
- CRTSTUFF_T_CFLAGS_S = $(TARGET_LIBGCC2_CFLAGS)
--
--# We *know* we have a limits.h in the glibc library, with extra
--# definitions needed for e.g. libgfortran.
--LIMITS_H_TEST = :
diff --git a/toolchain/gcc/patches/4.1.2/200-uclibc-locale.patch b/toolchain/gcc/patches/4.1.2/200-uclibc-locale.patch
deleted file mode 100644
index 7d20a7d559..0000000000
--- a/toolchain/gcc/patches/4.1.2/200-uclibc-locale.patch
+++ /dev/null
@@ -1,3239 +0,0 @@
---- a/libstdc++-v3/acinclude.m4
-+++ b/libstdc++-v3/acinclude.m4
-@@ -1003,7 +1003,7 @@ AC_DEFUN([GLIBCXX_ENABLE_CLOCALE], [
-   AC_MSG_CHECKING([for C locale to use])
-   GLIBCXX_ENABLE(clocale,auto,[@<:@=MODEL@:>@],
-     [use MODEL for target locale package],
--    [permit generic|gnu|ieee_1003.1-2001|yes|no|auto])
-+    [permit generic|gnu|ieee_1003.1-2001|uclibc|yes|no|auto])
-   
-   # If they didn't use this option switch, or if they specified --enable
-   # with no specific model, we'll have to look for one.  If they
-@@ -1019,6 +1019,9 @@ AC_DEFUN([GLIBCXX_ENABLE_CLOCALE], [
-   # Default to "generic".
-   if test $enable_clocale_flag = auto; then
-     case ${target_os} in
-+      *-uclibc*)
-+        enable_clocale_flag=uclibc
-+        ;;
-       linux* | gnu* | kfreebsd*-gnu | knetbsd*-gnu)
-         AC_EGREP_CPP([_GLIBCXX_ok], [
-         #include <features.h>
-@@ -1162,6 +1165,40 @@ AC_DEFUN([GLIBCXX_ENABLE_CLOCALE], [
-       CTIME_CC=config/locale/generic/time_members.cc
-       CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
-       ;;
-+    uclibc)
-+      AC_MSG_RESULT(uclibc)
-+
-+      # Declare intention to use gettext, and add support for specific
-+      # languages.
-+      # For some reason, ALL_LINGUAS has to be before AM-GNU-GETTEXT
-+      ALL_LINGUAS="de fr"
-+
-+      # Don't call AM-GNU-GETTEXT here. Instead, assume glibc.
-+      AC_CHECK_PROG(check_msgfmt, msgfmt, yes, no)
-+      if test x"$check_msgfmt" = x"yes" && test x"$enable_nls" = x"yes"; then
-+        USE_NLS=yes
-+      fi
-+      # Export the build objects.
-+      for ling in $ALL_LINGUAS; do \
-+        glibcxx_MOFILES="$glibcxx_MOFILES $ling.mo"; \
-+        glibcxx_POFILES="$glibcxx_POFILES $ling.po"; \
-+      done
-+      AC_SUBST(glibcxx_MOFILES)
-+      AC_SUBST(glibcxx_POFILES)
-+
-+      CLOCALE_H=config/locale/uclibc/c_locale.h
-+      CLOCALE_CC=config/locale/uclibc/c_locale.cc
-+      CCODECVT_CC=config/locale/uclibc/codecvt_members.cc
-+      CCOLLATE_CC=config/locale/uclibc/collate_members.cc
-+      CCTYPE_CC=config/locale/uclibc/ctype_members.cc
-+      CMESSAGES_H=config/locale/uclibc/messages_members.h
-+      CMESSAGES_CC=config/locale/uclibc/messages_members.cc
-+      CMONEY_CC=config/locale/uclibc/monetary_members.cc
-+      CNUMERIC_CC=config/locale/uclibc/numeric_members.cc
-+      CTIME_H=config/locale/uclibc/time_members.h
-+      CTIME_CC=config/locale/uclibc/time_members.cc
-+      CLOCALE_INTERNAL_H=config/locale/uclibc/c++locale_internal.h
-+      ;;
-   esac
- 
-   # This is where the testsuite looks for locale catalogs, using the
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/c++locale_internal.h
-@@ -0,0 +1,63 @@
-+// Prototypes for GLIBC thread locale __-prefixed functions -*- C++ -*-
-+
-+// Copyright (C) 2002, 2004, 2005 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+// Written by Jakub Jelinek <jakub@redhat.com>
-+
-+#include <bits/c++config.h>
-+#include <clocale>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning clean this up
-+#endif
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+                                                  
-+extern "C" __typeof(nl_langinfo_l) __nl_langinfo_l;
-+extern "C" __typeof(strcoll_l) __strcoll_l;
-+extern "C" __typeof(strftime_l) __strftime_l;
-+extern "C" __typeof(strtod_l) __strtod_l;
-+extern "C" __typeof(strtof_l) __strtof_l;
-+extern "C" __typeof(strtold_l) __strtold_l;
-+extern "C" __typeof(strxfrm_l) __strxfrm_l;
-+extern "C" __typeof(newlocale) __newlocale;
-+extern "C" __typeof(freelocale) __freelocale;
-+extern "C" __typeof(duplocale) __duplocale;
-+extern "C" __typeof(uselocale) __uselocale;
-+
-+#ifdef _GLIBCXX_USE_WCHAR_T
-+extern "C" __typeof(iswctype_l) __iswctype_l;
-+extern "C" __typeof(towlower_l) __towlower_l;
-+extern "C" __typeof(towupper_l) __towupper_l;
-+extern "C" __typeof(wcscoll_l) __wcscoll_l;
-+extern "C" __typeof(wcsftime_l) __wcsftime_l;
-+extern "C" __typeof(wcsxfrm_l) __wcsxfrm_l;
-+extern "C" __typeof(wctype_l) __wctype_l;
-+#endif 
-+
-+#endif // GLIBC 2.3 and later
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/c_locale.cc
-@@ -0,0 +1,152 @@
-+// Wrapper for underlying C-language localization -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003, 2004, 2005 
-+// Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.8  Standard locale categories.
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <cerrno>  // For errno
-+#include <locale>
-+#include <stdexcept>
-+#include <langinfo.h>
-+#include <bits/c++locale_internal.h>
-+
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __strtol_l(S, E, B, L)      strtol((S), (E), (B))
-+#define __strtoul_l(S, E, B, L)     strtoul((S), (E), (B))
-+#define __strtoll_l(S, E, B, L)     strtoll((S), (E), (B))
-+#define __strtoull_l(S, E, B, L)    strtoull((S), (E), (B))
-+#define __strtof_l(S, E, L)         strtof((S), (E))
-+#define __strtod_l(S, E, L)         strtod((S), (E))
-+#define __strtold_l(S, E, L)        strtold((S), (E))
-+#warning should dummy __newlocale check for C|POSIX ?
-+#define __newlocale(a, b, c)        NULL
-+#define __freelocale(a)             ((void)0)
-+#define __duplocale(a)              __c_locale()
-+#endif
-+
-+namespace std 
-+{
-+  template<>
-+    void
-+    __convert_to_v(const char* __s, float& __v, ios_base::iostate& __err, 
-+		   const __c_locale& __cloc)
-+    {
-+      char* __sanity;
-+      errno = 0;
-+      float __f = __strtof_l(__s, &__sanity, __cloc);
-+      if (__sanity != __s && errno != ERANGE)
-+	__v = __f;
-+      else
-+	__err |= ios_base::failbit;
-+    }
-+
-+  template<>
-+    void
-+    __convert_to_v(const char* __s, double& __v, ios_base::iostate& __err, 
-+		   const __c_locale& __cloc)
-+    {
-+      char* __sanity;
-+      errno = 0;
-+      double __d = __strtod_l(__s, &__sanity, __cloc);
-+      if (__sanity != __s && errno != ERANGE)
-+	__v = __d;
-+      else
-+	__err |= ios_base::failbit;
-+    }
-+
-+  template<>
-+    void
-+    __convert_to_v(const char* __s, long double& __v, ios_base::iostate& __err,
-+		   const __c_locale& __cloc)
-+    {
-+      char* __sanity;
-+      errno = 0;
-+      long double __ld = __strtold_l(__s, &__sanity, __cloc);
-+      if (__sanity != __s && errno != ERANGE)
-+	__v = __ld;
-+      else
-+	__err |= ios_base::failbit;
-+    }
-+
-+  void
-+  locale::facet::_S_create_c_locale(__c_locale& __cloc, const char* __s, 
-+				    __c_locale __old)
-+  {
-+    __cloc = __newlocale(1 << LC_ALL, __s, __old);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    if (!__cloc)
-+      {
-+	// This named locale is not supported by the underlying OS.
-+	__throw_runtime_error(__N("locale::facet::_S_create_c_locale "
-+			      "name not valid"));
-+      }
-+#endif
-+  }
-+  
-+  void
-+  locale::facet::_S_destroy_c_locale(__c_locale& __cloc)
-+  {
-+    if (__cloc && _S_get_c_locale() != __cloc)
-+      __freelocale(__cloc); 
-+  }
-+
-+  __c_locale
-+  locale::facet::_S_clone_c_locale(__c_locale& __cloc)
-+  { return __duplocale(__cloc); }
-+} // namespace std
-+
-+namespace __gnu_cxx
-+{
-+  const char* const category_names[6 + _GLIBCXX_NUM_CATEGORIES] =
-+    {
-+      "LC_CTYPE", 
-+      "LC_NUMERIC",
-+      "LC_TIME", 
-+      "LC_COLLATE", 
-+      "LC_MONETARY",
-+      "LC_MESSAGES", 
-+#if _GLIBCXX_NUM_CATEGORIES != 0
-+      "LC_PAPER", 
-+      "LC_NAME", 
-+      "LC_ADDRESS",
-+      "LC_TELEPHONE", 
-+      "LC_MEASUREMENT", 
-+      "LC_IDENTIFICATION" 
-+#endif
-+    };
-+}
-+
-+namespace std
-+{
-+  const char* const* const locale::_S_categories = __gnu_cxx::category_names;
-+}  // namespace std
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/c_locale.h
-@@ -0,0 +1,117 @@
-+// Wrapper for underlying C-language localization -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.8  Standard locale categories.
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#ifndef _C_LOCALE_H
-+#define _C_LOCALE_H 1
-+
-+#pragma GCC system_header
-+
-+#include <cstring>              // get std::strlen
-+#include <cstdio>               // get std::snprintf or std::sprintf
-+#include <clocale>
-+#include <langinfo.h>		// For codecvt
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix this
-+#endif
-+#ifdef __UCLIBC_HAS_LOCALE__
-+#include <iconv.h>		// For codecvt using iconv, iconv_t
-+#endif
-+#ifdef __UCLIBC_HAS_GETTEXT_AWARENESS__
-+#include <libintl.h> 		// For messages
-+#endif
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning what is _GLIBCXX_C_LOCALE_GNU for
-+#endif
-+#define _GLIBCXX_C_LOCALE_GNU 1
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix categories
-+#endif
-+// #define _GLIBCXX_NUM_CATEGORIES 6
-+#define _GLIBCXX_NUM_CATEGORIES 0
-+ 
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+namespace __gnu_cxx
-+{
-+  extern "C" __typeof(uselocale) __uselocale;
-+}
-+#endif
-+
-+namespace std
-+{
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+  typedef __locale_t		__c_locale;
-+#else
-+  typedef int*			__c_locale;
-+#endif
-+
-+  // Convert numeric value of type _Tv to string and return length of
-+  // string.  If snprintf is available use it, otherwise fall back to
-+  // the unsafe sprintf which, in general, can be dangerous and should
-+  // be avoided.
-+  template<typename _Tv>
-+    int
-+    __convert_from_v(char* __out, 
-+		     const int __size __attribute__ ((__unused__)),
-+		     const char* __fmt,
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+		     _Tv __v, const __c_locale& __cloc, int __prec)
-+    {
-+      __c_locale __old = __gnu_cxx::__uselocale(__cloc);
-+#else
-+		     _Tv __v, const __c_locale&, int __prec)
-+    {
-+# ifdef __UCLIBC_HAS_LOCALE__
-+      char* __old = std::setlocale(LC_ALL, NULL);
-+      char* __sav = new char[std::strlen(__old) + 1];
-+      std::strcpy(__sav, __old);
-+      std::setlocale(LC_ALL, "C");
-+# endif
-+#endif
-+
-+      const int __ret = std::snprintf(__out, __size, __fmt, __prec, __v);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+      __gnu_cxx::__uselocale(__old);
-+#elif defined __UCLIBC_HAS_LOCALE__
-+      std::setlocale(LC_ALL, __sav);
-+      delete [] __sav;
-+#endif
-+      return __ret;
-+    }
-+}
-+
-+#endif
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/codecvt_members.cc
-@@ -0,0 +1,306 @@
-+// std::codecvt implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2002, 2003 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.1.5 - Template class codecvt
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <bits/c++locale_internal.h>
-+
-+namespace std
-+{
-+  // Specializations.
-+#ifdef _GLIBCXX_USE_WCHAR_T
-+  codecvt_base::result
-+  codecvt<wchar_t, char, mbstate_t>::
-+  do_out(state_type& __state, const intern_type* __from, 
-+	 const intern_type* __from_end, const intern_type*& __from_next,
-+	 extern_type* __to, extern_type* __to_end,
-+	 extern_type*& __to_next) const
-+  {
-+    result __ret = ok;
-+    state_type __tmp_state(__state);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __c_locale __old = __uselocale(_M_c_locale_codecvt);
-+#endif
-+
-+    // wcsnrtombs is *very* fast but stops if encounters NUL characters:
-+    // in case we fall back to wcrtomb and then continue, in a loop.
-+    // NB: wcsnrtombs is a GNU extension
-+    for (__from_next = __from, __to_next = __to;
-+	 __from_next < __from_end && __to_next < __to_end
-+	 && __ret == ok;)
-+      {
-+	const intern_type* __from_chunk_end = wmemchr(__from_next, L'\0',
-+						      __from_end - __from_next);
-+	if (!__from_chunk_end)
-+	  __from_chunk_end = __from_end;
-+
-+	__from = __from_next;
-+	const size_t __conv = wcsnrtombs(__to_next, &__from_next,
-+					 __from_chunk_end - __from_next,
-+					 __to_end - __to_next, &__state);
-+	if (__conv == static_cast<size_t>(-1))
-+	  {
-+	    // In case of error, in order to stop at the exact place we
-+	    // have to start again from the beginning with a series of
-+	    // wcrtomb.
-+	    for (; __from < __from_next; ++__from)
-+	      __to_next += wcrtomb(__to_next, *__from, &__tmp_state);
-+	    __state = __tmp_state;
-+	    __ret = error;
-+	  }
-+	else if (__from_next && __from_next < __from_chunk_end)
-+	  {
-+	    __to_next += __conv;
-+	    __ret = partial;
-+	  }
-+	else
-+	  {
-+	    __from_next = __from_chunk_end;
-+	    __to_next += __conv;
-+	  }
-+
-+	if (__from_next < __from_end && __ret == ok)
-+	  {
-+	    extern_type __buf[MB_LEN_MAX];
-+	    __tmp_state = __state;
-+	    const size_t __conv = wcrtomb(__buf, *__from_next, &__tmp_state);
-+	    if (__conv > static_cast<size_t>(__to_end - __to_next))
-+	      __ret = partial;
-+	    else
-+	      {
-+		memcpy(__to_next, __buf, __conv);
-+		__state = __tmp_state;
-+		__to_next += __conv;
-+		++__from_next;
-+	      }
-+	  }
-+      }
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __uselocale(__old);
-+#endif
-+
-+    return __ret; 
-+  }
-+  
-+  codecvt_base::result
-+  codecvt<wchar_t, char, mbstate_t>::
-+  do_in(state_type& __state, const extern_type* __from, 
-+	const extern_type* __from_end, const extern_type*& __from_next,
-+	intern_type* __to, intern_type* __to_end,
-+	intern_type*& __to_next) const
-+  {
-+    result __ret = ok;
-+    state_type __tmp_state(__state);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __c_locale __old = __uselocale(_M_c_locale_codecvt);
-+#endif
-+
-+    // mbsnrtowcs is *very* fast but stops if encounters NUL characters:
-+    // in case we store a L'\0' and then continue, in a loop.
-+    // NB: mbsnrtowcs is a GNU extension
-+    for (__from_next = __from, __to_next = __to;
-+	 __from_next < __from_end && __to_next < __to_end
-+	 && __ret == ok;)
-+      {
-+	const extern_type* __from_chunk_end;
-+	__from_chunk_end = static_cast<const extern_type*>(memchr(__from_next, '\0',
-+								  __from_end
-+								  - __from_next));
-+	if (!__from_chunk_end)
-+	  __from_chunk_end = __from_end;
-+
-+	__from = __from_next;
-+	size_t __conv = mbsnrtowcs(__to_next, &__from_next,
-+				   __from_chunk_end - __from_next,
-+				   __to_end - __to_next, &__state);
-+	if (__conv == static_cast<size_t>(-1))
-+	  {
-+	    // In case of error, in order to stop at the exact place we
-+	    // have to start again from the beginning with a series of
-+	    // mbrtowc.
-+	    for (;; ++__to_next, __from += __conv)
-+	      {
-+		__conv = mbrtowc(__to_next, __from, __from_end - __from,
-+				 &__tmp_state);
-+		if (__conv == static_cast<size_t>(-1)
-+		    || __conv == static_cast<size_t>(-2))
-+		  break;
-+	      }
-+	    __from_next = __from;
-+	    __state = __tmp_state;	    
-+	    __ret = error;
-+	  }
-+	else if (__from_next && __from_next < __from_chunk_end)
-+	  {
-+	    // It is unclear what to return in this case (see DR 382). 
-+	    __to_next += __conv;
-+	    __ret = partial;
-+	  }
-+	else
-+	  {
-+	    __from_next = __from_chunk_end;
-+	    __to_next += __conv;
-+	  }
-+
-+	if (__from_next < __from_end && __ret == ok)
-+	  {
-+	    if (__to_next < __to_end)
-+	      {
-+		// XXX Probably wrong for stateful encodings
-+		__tmp_state = __state;		
-+		++__from_next;
-+		*__to_next++ = L'\0';
-+	      }
-+	    else
-+	      __ret = partial;
-+	  }
-+      }
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __uselocale(__old);
-+#endif
-+
-+    return __ret; 
-+  }
-+
-+  int 
-+  codecvt<wchar_t, char, mbstate_t>::
-+  do_encoding() const throw()
-+  {
-+    // XXX This implementation assumes that the encoding is
-+    // stateless and is either single-byte or variable-width.
-+    int __ret = 0;
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __c_locale __old = __uselocale(_M_c_locale_codecvt);
-+#endif
-+    if (MB_CUR_MAX == 1)
-+      __ret = 1;
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __uselocale(__old);
-+#endif
-+    return __ret;
-+  }  
-+
-+  int 
-+  codecvt<wchar_t, char, mbstate_t>::
-+  do_max_length() const throw()
-+  {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __c_locale __old = __uselocale(_M_c_locale_codecvt);
-+#endif
-+    // XXX Probably wrong for stateful encodings.
-+    int __ret = MB_CUR_MAX;
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __uselocale(__old);
-+#endif
-+    return __ret;
-+  }
-+  
-+  int 
-+  codecvt<wchar_t, char, mbstate_t>::
-+  do_length(state_type& __state, const extern_type* __from,
-+	    const extern_type* __end, size_t __max) const
-+  {
-+    int __ret = 0;
-+    state_type __tmp_state(__state);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __c_locale __old = __uselocale(_M_c_locale_codecvt);
-+#endif
-+
-+    // mbsnrtowcs is *very* fast but stops if encounters NUL characters:
-+    // in case we advance past it and then continue, in a loop.
-+    // NB: mbsnrtowcs is a GNU extension
-+  
-+    // A dummy internal buffer is needed in order for mbsnrtocws to consider
-+    // its fourth parameter (it wouldn't with NULL as first parameter).
-+    wchar_t* __to = static_cast<wchar_t*>(__builtin_alloca(sizeof(wchar_t) 
-+							   * __max));
-+    while (__from < __end && __max)
-+      {
-+	const extern_type* __from_chunk_end;
-+	__from_chunk_end = static_cast<const extern_type*>(memchr(__from, '\0',
-+								  __end
-+								  - __from));
-+	if (!__from_chunk_end)
-+	  __from_chunk_end = __end;
-+
-+	const extern_type* __tmp_from = __from;
-+	size_t __conv = mbsnrtowcs(__to, &__from,
-+				   __from_chunk_end - __from,
-+				   __max, &__state);
-+	if (__conv == static_cast<size_t>(-1))
-+	  {
-+	    // In case of error, in order to stop at the exact place we
-+	    // have to start again from the beginning with a series of
-+	    // mbrtowc.
-+	    for (__from = __tmp_from;; __from += __conv)
-+	      {
-+		__conv = mbrtowc(NULL, __from, __end - __from,
-+				 &__tmp_state);
-+		if (__conv == static_cast<size_t>(-1)
-+		    || __conv == static_cast<size_t>(-2))
-+		  break;
-+	      }
-+	    __state = __tmp_state;
-+	    __ret += __from - __tmp_from;
-+	    break;
-+	  }
-+	if (!__from)
-+	  __from = __from_chunk_end;
-+	
-+	__ret += __from - __tmp_from;
-+	__max -= __conv;
-+
-+	if (__from < __end && __max)
-+	  {
-+	    // XXX Probably wrong for stateful encodings
-+	    __tmp_state = __state;
-+	    ++__from;
-+	    ++__ret;
-+	    --__max;
-+	  }
-+      }
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __uselocale(__old);
-+#endif
-+
-+    return __ret; 
-+  }
-+#endif
-+}
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/collate_members.cc
-@@ -0,0 +1,80 @@
-+// std::collate implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.4.1.2  collate virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <bits/c++locale_internal.h>
-+
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __strcoll_l(S1, S2, L)      strcoll((S1), (S2))
-+#define __strxfrm_l(S1, S2, N, L)   strxfrm((S1), (S2), (N))
-+#define __wcscoll_l(S1, S2, L)      wcscoll((S1), (S2))
-+#define __wcsxfrm_l(S1, S2, N, L)   wcsxfrm((S1), (S2), (N))
-+#endif
-+
-+namespace std
-+{
-+  // These are basically extensions to char_traits, and perhaps should
-+  // be put there instead of here.
-+  template<>
-+    int 
-+    collate<char>::_M_compare(const char* __one, const char* __two) const
-+    { 
-+      int __cmp = __strcoll_l(__one, __two, _M_c_locale_collate);
-+      return (__cmp >> (8 * sizeof (int) - 2)) | (__cmp != 0);
-+    }
-+  
-+  template<>
-+    size_t
-+    collate<char>::_M_transform(char* __to, const char* __from, 
-+				size_t __n) const 
-+    { return __strxfrm_l(__to, __from, __n, _M_c_locale_collate); }
-+
-+#ifdef _GLIBCXX_USE_WCHAR_T
-+  template<>
-+    int 
-+    collate<wchar_t>::_M_compare(const wchar_t* __one, 
-+				 const wchar_t* __two) const
-+    {
-+      int __cmp = __wcscoll_l(__one, __two, _M_c_locale_collate);
-+      return (__cmp >> (8 * sizeof (int) - 2)) | (__cmp != 0);
-+    }
-+  
-+  template<>
-+    size_t
-+    collate<wchar_t>::_M_transform(wchar_t* __to, const wchar_t* __from,
-+				   size_t __n) const
-+    { return __wcsxfrm_l(__to, __from, __n, _M_c_locale_collate); }
-+#endif
-+}
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/ctype_members.cc
-@@ -0,0 +1,314 @@
-+// std::ctype implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.1.1.2  ctype virtual functions.
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#define _LIBC
-+#include <locale>
-+#undef _LIBC
-+#include <bits/c++locale_internal.h>
-+
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __wctype_l(S, L)           wctype((S))
-+#define __towupper_l(C, L)         towupper((C))
-+#define __towlower_l(C, L)         towlower((C))
-+#define __iswctype_l(C, M, L)      iswctype((C), (M))
-+#endif
-+
-+namespace std
-+{
-+  // NB: The other ctype<char> specializations are in src/locale.cc and
-+  // various /config/os/* files.
-+  template<>
-+    ctype_byname<char>::ctype_byname(const char* __s, size_t __refs)
-+    : ctype<char>(0, false, __refs) 
-+    { 		
-+      if (std::strcmp(__s, "C") != 0 && std::strcmp(__s, "POSIX") != 0)
-+	{
-+	  this->_S_destroy_c_locale(this->_M_c_locale_ctype);
-+	  this->_S_create_c_locale(this->_M_c_locale_ctype, __s); 
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+	  this->_M_toupper = this->_M_c_locale_ctype->__ctype_toupper;
-+	  this->_M_tolower = this->_M_c_locale_ctype->__ctype_tolower;
-+	  this->_M_table = this->_M_c_locale_ctype->__ctype_b;
-+#endif
-+	}
-+    }
-+
-+#ifdef _GLIBCXX_USE_WCHAR_T  
-+  ctype<wchar_t>::__wmask_type
-+  ctype<wchar_t>::_M_convert_to_wmask(const mask __m) const
-+  {
-+    __wmask_type __ret;
-+    switch (__m)
-+      {
-+      case space:
-+	__ret = __wctype_l("space", _M_c_locale_ctype);
-+	break;
-+      case print:
-+	__ret = __wctype_l("print", _M_c_locale_ctype);
-+	break;
-+      case cntrl:
-+	__ret = __wctype_l("cntrl", _M_c_locale_ctype);
-+	break;
-+      case upper:
-+	__ret = __wctype_l("upper", _M_c_locale_ctype);
-+	break;
-+      case lower:
-+	__ret = __wctype_l("lower", _M_c_locale_ctype);
-+	break;
-+      case alpha:
-+	__ret = __wctype_l("alpha", _M_c_locale_ctype);
-+	break;
-+      case digit:
-+	__ret = __wctype_l("digit", _M_c_locale_ctype);
-+	break;
-+      case punct:
-+	__ret = __wctype_l("punct", _M_c_locale_ctype);
-+	break;
-+      case xdigit:
-+	__ret = __wctype_l("xdigit", _M_c_locale_ctype);
-+	break;
-+      case alnum:
-+	__ret = __wctype_l("alnum", _M_c_locale_ctype);
-+	break;
-+      case graph:
-+	__ret = __wctype_l("graph", _M_c_locale_ctype);
-+	break;
-+      default:
-+	__ret = __wmask_type();
-+      }
-+    return __ret;
-+  }
-+  
-+  wchar_t
-+  ctype<wchar_t>::do_toupper(wchar_t __c) const
-+  { return __towupper_l(__c, _M_c_locale_ctype); }
-+
-+  const wchar_t*
-+  ctype<wchar_t>::do_toupper(wchar_t* __lo, const wchar_t* __hi) const
-+  {
-+    while (__lo < __hi)
-+      {
-+        *__lo = __towupper_l(*__lo, _M_c_locale_ctype);
-+        ++__lo;
-+      }
-+    return __hi;
-+  }
-+  
-+  wchar_t
-+  ctype<wchar_t>::do_tolower(wchar_t __c) const
-+  { return __towlower_l(__c, _M_c_locale_ctype); }
-+  
-+  const wchar_t*
-+  ctype<wchar_t>::do_tolower(wchar_t* __lo, const wchar_t* __hi) const
-+  {
-+    while (__lo < __hi)
-+      {
-+        *__lo = __towlower_l(*__lo, _M_c_locale_ctype);
-+        ++__lo;
-+      }
-+    return __hi;
-+  }
-+
-+  bool
-+  ctype<wchar_t>::
-+  do_is(mask __m, wchar_t __c) const
-+  { 
-+    // The case of __m == ctype_base::space is particularly important,
-+    // due to its use in many istream functions.  Therefore we deal with
-+    // it first, exploiting the knowledge that on GNU systems _M_bit[5]
-+    // is the mask corresponding to ctype_base::space.  NB: an encoding
-+    // change would not affect correctness!
-+    bool __ret = false;
-+    if (__m == _M_bit[5])
-+      __ret = __iswctype_l(__c, _M_wmask[5], _M_c_locale_ctype);
-+    else
-+      {
-+	// Highest bitmask in ctype_base == 10, but extra in "C"
-+	// library for blank.
-+	const size_t __bitmasksize = 11;
-+	for (size_t __bitcur = 0; __bitcur <= __bitmasksize; ++__bitcur)
-+	  if (__m & _M_bit[__bitcur])
-+	    {
-+	      if (__iswctype_l(__c, _M_wmask[__bitcur], _M_c_locale_ctype))
-+		{
-+		  __ret = true;
-+		  break;
-+		}
-+	      else if (__m == _M_bit[__bitcur])
-+		break;
-+	    }
-+      }
-+    return __ret;    
-+  }
-+
-+  const wchar_t* 
-+  ctype<wchar_t>::
-+  do_is(const wchar_t* __lo, const wchar_t* __hi, mask* __vec) const
-+  {
-+    for (; __lo < __hi; ++__vec, ++__lo)
-+      {
-+	// Highest bitmask in ctype_base == 10, but extra in "C"
-+	// library for blank.
-+	const size_t __bitmasksize = 11; 
-+	mask __m = 0;
-+	for (size_t __bitcur = 0; __bitcur <= __bitmasksize; ++__bitcur)
-+	  if (__iswctype_l(*__lo, _M_wmask[__bitcur], _M_c_locale_ctype))
-+	    __m |= _M_bit[__bitcur];
-+	*__vec = __m;
-+      }
-+    return __hi;
-+  }
-+  
-+  const wchar_t* 
-+  ctype<wchar_t>::
-+  do_scan_is(mask __m, const wchar_t* __lo, const wchar_t* __hi) const
-+  {
-+    while (__lo < __hi && !this->do_is(__m, *__lo))
-+      ++__lo;
-+    return __lo;
-+  }
-+
-+  const wchar_t*
-+  ctype<wchar_t>::
-+  do_scan_not(mask __m, const char_type* __lo, const char_type* __hi) const
-+  {
-+    while (__lo < __hi && this->do_is(__m, *__lo) != 0)
-+      ++__lo;
-+    return __lo;
-+  }
-+
-+  wchar_t
-+  ctype<wchar_t>::
-+  do_widen(char __c) const
-+  { return _M_widen[static_cast<unsigned char>(__c)]; }
-+
-+  const char* 
-+  ctype<wchar_t>::
-+  do_widen(const char* __lo, const char* __hi, wchar_t* __dest) const
-+  {
-+    while (__lo < __hi)
-+      {
-+	*__dest = _M_widen[static_cast<unsigned char>(*__lo)];
-+	++__lo;
-+	++__dest;
-+      }
-+    return __hi;
-+  }
-+
-+  char
-+  ctype<wchar_t>::
-+  do_narrow(wchar_t __wc, char __dfault) const
-+  {
-+    if (__wc >= 0 && __wc < 128 && _M_narrow_ok)
-+      return _M_narrow[__wc];
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __c_locale __old = __uselocale(_M_c_locale_ctype);
-+#endif
-+    const int __c = wctob(__wc);
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __uselocale(__old);
-+#endif
-+    return (__c == EOF ? __dfault : static_cast<char>(__c)); 
-+  }
-+
-+  const wchar_t*
-+  ctype<wchar_t>::
-+  do_narrow(const wchar_t* __lo, const wchar_t* __hi, char __dfault, 
-+	    char* __dest) const
-+  {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __c_locale __old = __uselocale(_M_c_locale_ctype);
-+#endif
-+    if (_M_narrow_ok)
-+      while (__lo < __hi)
-+	{
-+	  if (*__lo >= 0 && *__lo < 128)
-+	    *__dest = _M_narrow[*__lo];
-+	  else
-+	    {
-+	      const int __c = wctob(*__lo);
-+	      *__dest = (__c == EOF ? __dfault : static_cast<char>(__c));
-+	    }
-+	  ++__lo;
-+	  ++__dest;
-+	}
-+    else
-+      while (__lo < __hi)
-+	{
-+	  const int __c = wctob(*__lo);
-+	  *__dest = (__c == EOF ? __dfault : static_cast<char>(__c));
-+	  ++__lo;
-+	  ++__dest;
-+	}
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __uselocale(__old);
-+#endif
-+    return __hi;
-+  }
-+
-+  void
-+  ctype<wchar_t>::_M_initialize_ctype()
-+  {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __c_locale __old = __uselocale(_M_c_locale_ctype);
-+#endif
-+    wint_t __i;
-+    for (__i = 0; __i < 128; ++__i)
-+      {
-+	const int __c = wctob(__i);
-+	if (__c == EOF)
-+	  break;
-+	else
-+	  _M_narrow[__i] = static_cast<char>(__c);
-+      }
-+    if (__i == 128)
-+      _M_narrow_ok = true;
-+    else
-+      _M_narrow_ok = false;
-+    for (size_t __j = 0;
-+	 __j < sizeof(_M_widen) / sizeof(wint_t); ++__j)
-+      _M_widen[__j] = btowc(__j);
-+
-+    for (size_t __k = 0; __k <= 11; ++__k)
-+      { 
-+	_M_bit[__k] = static_cast<mask>(_ISbit(__k));
-+	_M_wmask[__k] = _M_convert_to_wmask(_M_bit[__k]);
-+      }
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+    __uselocale(__old);
-+#endif
-+  }
-+#endif //  _GLIBCXX_USE_WCHAR_T
-+}
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/messages_members.cc
-@@ -0,0 +1,100 @@
-+// std::messages implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.7.1.2  messages virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <bits/c++locale_internal.h>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix gettext stuff
-+#endif
-+#ifdef __UCLIBC_HAS_GETTEXT_AWARENESS__
-+extern "C" char *__dcgettext(const char *domainname,
-+			     const char *msgid, int category);
-+#undef gettext
-+#define gettext(msgid) __dcgettext(NULL, msgid, LC_MESSAGES)
-+#else
-+#undef gettext
-+#define gettext(msgid) (msgid)
-+#endif
-+
-+namespace std
-+{
-+  // Specializations.
-+  template<>
-+    string
-+    messages<char>::do_get(catalog, int, int, const string& __dfault) const
-+    {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+      __c_locale __old = __uselocale(_M_c_locale_messages);
-+      const char* __msg = const_cast<const char*>(gettext(__dfault.c_str()));
-+      __uselocale(__old);
-+      return string(__msg);
-+#elif defined __UCLIBC_HAS_LOCALE__
-+      char* __old = strdup(setlocale(LC_ALL, NULL));
-+      setlocale(LC_ALL, _M_name_messages);
-+      const char* __msg = gettext(__dfault.c_str());
-+      setlocale(LC_ALL, __old);
-+      free(__old);
-+      return string(__msg);
-+#else
-+      const char* __msg = gettext(__dfault.c_str());
-+      return string(__msg);
-+#endif
-+    }
-+
-+#ifdef _GLIBCXX_USE_WCHAR_T
-+  template<>
-+    wstring
-+    messages<wchar_t>::do_get(catalog, int, int, const wstring& __dfault) const
-+    {
-+# ifdef __UCLIBC_HAS_XLOCALE__
-+      __c_locale __old = __uselocale(_M_c_locale_messages);
-+      char* __msg = gettext(_M_convert_to_char(__dfault));
-+      __uselocale(__old);
-+      return _M_convert_from_char(__msg);
-+# elif defined __UCLIBC_HAS_LOCALE__
-+      char* __old = strdup(setlocale(LC_ALL, NULL));
-+      setlocale(LC_ALL, _M_name_messages);
-+      char* __msg = gettext(_M_convert_to_char(__dfault));
-+      setlocale(LC_ALL, __old);
-+      free(__old);
-+      return _M_convert_from_char(__msg);
-+# else
-+      char* __msg = gettext(_M_convert_to_char(__dfault));
-+      return _M_convert_from_char(__msg);
-+# endif
-+    }
-+#endif
-+}
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/messages_members.h
-@@ -0,0 +1,121 @@
-+// std::messages implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.7.1.2  messages functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix prototypes for *textdomain funcs
-+#endif
-+#ifdef __UCLIBC_HAS_GETTEXT_AWARENESS__
-+extern "C" char *__textdomain(const char *domainname);
-+extern "C" char *__bindtextdomain(const char *domainname,
-+				  const char *dirname);
-+#else
-+#undef __textdomain
-+#undef __bindtextdomain
-+#define __textdomain(D)           ((void)0)
-+#define __bindtextdomain(D,P)     ((void)0)
-+#endif
-+
-+  // Non-virtual member functions.
-+  template<typename _CharT>
-+     messages<_CharT>::messages(size_t __refs)
-+     : facet(__refs), _M_c_locale_messages(_S_get_c_locale()), 
-+       _M_name_messages(_S_get_c_name())
-+     { }
-+
-+  template<typename _CharT>
-+     messages<_CharT>::messages(__c_locale __cloc, const char* __s, 
-+				size_t __refs) 
-+     : facet(__refs), _M_c_locale_messages(NULL), _M_name_messages(NULL)
-+     {
-+       const size_t __len = std::strlen(__s) + 1;
-+       char* __tmp = new char[__len];
-+       std::memcpy(__tmp, __s, __len);
-+       _M_name_messages = __tmp;
-+
-+       // Last to avoid leaking memory if new throws.
-+       _M_c_locale_messages = _S_clone_c_locale(__cloc);
-+     }
-+
-+  template<typename _CharT>
-+    typename messages<_CharT>::catalog 
-+    messages<_CharT>::open(const basic_string<char>& __s, const locale& __loc, 
-+			   const char* __dir) const
-+    { 
-+      __bindtextdomain(__s.c_str(), __dir);
-+      return this->do_open(__s, __loc); 
-+    }
-+
-+  // Virtual member functions.
-+  template<typename _CharT>
-+    messages<_CharT>::~messages()
-+    { 
-+      if (_M_name_messages != _S_get_c_name())
-+	delete [] _M_name_messages;
-+      _S_destroy_c_locale(_M_c_locale_messages); 
-+    }
-+
-+  template<typename _CharT>
-+    typename messages<_CharT>::catalog 
-+    messages<_CharT>::do_open(const basic_string<char>& __s, 
-+			      const locale&) const
-+    { 
-+      // No error checking is done, assume the catalog exists and can
-+      // be used.
-+      __textdomain(__s.c_str());
-+      return 0;
-+    }
-+
-+  template<typename _CharT>
-+    void    
-+    messages<_CharT>::do_close(catalog) const 
-+    { }
-+
-+   // messages_byname
-+   template<typename _CharT>
-+     messages_byname<_CharT>::messages_byname(const char* __s, size_t __refs)
-+     : messages<_CharT>(__refs) 
-+     { 
-+       if (this->_M_name_messages != locale::facet::_S_get_c_name())
-+	 delete [] this->_M_name_messages;
-+       char* __tmp = new char[std::strlen(__s) + 1];
-+       std::strcpy(__tmp, __s);
-+       this->_M_name_messages = __tmp;
-+
-+       if (std::strcmp(__s, "C") != 0 && std::strcmp(__s, "POSIX") != 0)
-+	 {
-+	   this->_S_destroy_c_locale(this->_M_c_locale_messages);
-+	   this->_S_create_c_locale(this->_M_c_locale_messages, __s); 
-+	 }
-+     }
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/monetary_members.cc
-@@ -0,0 +1,692 @@
-+// std::moneypunct implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.6.3.2  moneypunct virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#define _LIBC
-+#include <locale>
-+#undef _LIBC
-+#include <bits/c++locale_internal.h>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning optimize this for uclibc
-+#warning tailor for stub locale support
-+#endif
-+
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __nl_langinfo_l(N, L)         nl_langinfo((N))
-+#endif
-+
-+namespace std
-+{
-+  // Construct and return valid pattern consisting of some combination of:
-+  // space none symbol sign value
-+  money_base::pattern
-+  money_base::_S_construct_pattern(char __precedes, char __space, char __posn)
-+  { 
-+    pattern __ret;
-+
-+    // This insanely complicated routine attempts to construct a valid
-+    // pattern for use with monyepunct. A couple of invariants:
-+
-+    // if (__precedes) symbol -> value
-+    // else value -> symbol
-+    
-+    // if (__space) space
-+    // else none
-+
-+    // none == never first
-+    // space never first or last
-+
-+    // Any elegant implementations of this are welcome.
-+    switch (__posn)
-+      {
-+      case 0:
-+      case 1:
-+	// 1 The sign precedes the value and symbol.
-+	__ret.field[0] = sign;
-+	if (__space)
-+	  {
-+	    // Pattern starts with sign.
-+	    if (__precedes)
-+	      {
-+		__ret.field[1] = symbol;
-+		__ret.field[3] = value;
-+	      }
-+	    else
-+	      {
-+		__ret.field[1] = value;
-+		__ret.field[3] = symbol;
-+	      }
-+	    __ret.field[2] = space;
-+	  }
-+	else
-+	  {
-+	    // Pattern starts with sign and ends with none.
-+	    if (__precedes)
-+	      {
-+		__ret.field[1] = symbol;
-+		__ret.field[2] = value;
-+	      }
-+	    else
-+	      {
-+		__ret.field[1] = value;
-+		__ret.field[2] = symbol;
-+	      }
-+	    __ret.field[3] = none;
-+	  }
-+	break;
-+      case 2:
-+	// 2 The sign follows the value and symbol.
-+	if (__space)
-+	  {
-+	    // Pattern either ends with sign.
-+	    if (__precedes)
-+	      {
-+		__ret.field[0] = symbol;
-+		__ret.field[2] = value;
-+	      }
-+	    else
-+	      {
-+		__ret.field[0] = value;
-+		__ret.field[2] = symbol;
-+	      }
-+	    __ret.field[1] = space;
-+	    __ret.field[3] = sign;
-+	  }
-+	else
-+	  {
-+	    // Pattern ends with sign then none.
-+	    if (__precedes)
-+	      {
-+		__ret.field[0] = symbol;
-+		__ret.field[1] = value;
-+	      }
-+	    else
-+	      {
-+		__ret.field[0] = value;
-+		__ret.field[1] = symbol;
-+	      }
-+	    __ret.field[2] = sign;
-+	    __ret.field[3] = none;
-+	  }
-+	break;
-+      case 3:
-+	// 3 The sign immediately precedes the symbol.
-+	if (__precedes)
-+	  {
-+	    __ret.field[0] = sign;
-+	    __ret.field[1] = symbol;	    
-+	    if (__space)
-+	      {
-+		__ret.field[2] = space;
-+		__ret.field[3] = value;
-+	      }
-+	    else
-+	      {
-+		__ret.field[2] = value;		
-+		__ret.field[3] = none;
-+	      }
-+	  }
-+	else
-+	  {
-+	    __ret.field[0] = value;
-+	    if (__space)
-+	      {
-+		__ret.field[1] = space;
-+		__ret.field[2] = sign;
-+		__ret.field[3] = symbol;
-+	      }
-+	    else
-+	      {
-+		__ret.field[1] = sign;
-+		__ret.field[2] = symbol;
-+		__ret.field[3] = none;
-+	      }
-+	  }
-+	break;
-+      case 4:
-+	// 4 The sign immediately follows the symbol.
-+	if (__precedes)
-+	  {
-+	    __ret.field[0] = symbol;
-+	    __ret.field[1] = sign;
-+	    if (__space)
-+	      {
-+		__ret.field[2] = space;
-+		__ret.field[3] = value;
-+	      }
-+	    else
-+	      {
-+		__ret.field[2] = value;
-+		__ret.field[3] = none;
-+	      }
-+	  }
-+	else
-+	  {
-+	    __ret.field[0] = value;
-+	    if (__space)
-+	      {
-+		__ret.field[1] = space;
-+		__ret.field[2] = symbol;
-+		__ret.field[3] = sign;
-+	      }
-+	    else
-+	      {
-+		__ret.field[1] = symbol;
-+		__ret.field[2] = sign;
-+		__ret.field[3] = none;
-+	      }
-+	  }
-+	break;
-+      default:
-+	__ret = pattern();
-+      }
-+    return __ret;
-+  }
-+
-+  template<> 
-+    void
-+    moneypunct<char, true>::_M_initialize_moneypunct(__c_locale __cloc, 
-+						     const char*)
-+    {
-+      if (!_M_data)
-+	_M_data = new __moneypunct_cache<char, true>;
-+
-+      if (!__cloc)
-+	{
-+	  // "C" locale
-+	  _M_data->_M_decimal_point = '.';
-+	  _M_data->_M_thousands_sep = ',';
-+	  _M_data->_M_grouping = "";
-+	  _M_data->_M_grouping_size = 0;
-+	  _M_data->_M_curr_symbol = "";
-+	  _M_data->_M_curr_symbol_size = 0;
-+	  _M_data->_M_positive_sign = "";
-+	  _M_data->_M_positive_sign_size = 0;
-+	  _M_data->_M_negative_sign = "";
-+	  _M_data->_M_negative_sign_size = 0;
-+	  _M_data->_M_frac_digits = 0;
-+	  _M_data->_M_pos_format = money_base::_S_default_pattern;
-+	  _M_data->_M_neg_format = money_base::_S_default_pattern;
-+
-+	  for (size_t __i = 0; __i < money_base::_S_end; ++__i)
-+	    _M_data->_M_atoms[__i] = money_base::_S_atoms[__i];
-+	}
-+      else
-+	{
-+	  // Named locale.
-+	  _M_data->_M_decimal_point = *(__nl_langinfo_l(__MON_DECIMAL_POINT, 
-+							__cloc));
-+	  _M_data->_M_thousands_sep = *(__nl_langinfo_l(__MON_THOUSANDS_SEP, 
-+							__cloc));
-+	  _M_data->_M_grouping = __nl_langinfo_l(__MON_GROUPING, __cloc);
-+	  _M_data->_M_grouping_size = strlen(_M_data->_M_grouping);
-+	  _M_data->_M_positive_sign = __nl_langinfo_l(__POSITIVE_SIGN, __cloc);
-+	  _M_data->_M_positive_sign_size = strlen(_M_data->_M_positive_sign);
-+
-+	  char __nposn = *(__nl_langinfo_l(__INT_N_SIGN_POSN, __cloc));
-+	  if (!__nposn)
-+	    _M_data->_M_negative_sign = "()";
-+	  else
-+	    _M_data->_M_negative_sign = __nl_langinfo_l(__NEGATIVE_SIGN, 
-+							__cloc);
-+	  _M_data->_M_negative_sign_size = strlen(_M_data->_M_negative_sign);
-+
-+	  // _Intl == true
-+	  _M_data->_M_curr_symbol = __nl_langinfo_l(__INT_CURR_SYMBOL, __cloc);
-+	  _M_data->_M_curr_symbol_size = strlen(_M_data->_M_curr_symbol);
-+	  _M_data->_M_frac_digits = *(__nl_langinfo_l(__INT_FRAC_DIGITS, 
-+						      __cloc));
-+	  char __pprecedes = *(__nl_langinfo_l(__INT_P_CS_PRECEDES, __cloc));
-+	  char __pspace = *(__nl_langinfo_l(__INT_P_SEP_BY_SPACE, __cloc));
-+	  char __pposn = *(__nl_langinfo_l(__INT_P_SIGN_POSN, __cloc));
-+	  _M_data->_M_pos_format = _S_construct_pattern(__pprecedes, __pspace, 
-+							__pposn);
-+	  char __nprecedes = *(__nl_langinfo_l(__INT_N_CS_PRECEDES, __cloc));
-+	  char __nspace = *(__nl_langinfo_l(__INT_N_SEP_BY_SPACE, __cloc));
-+	  _M_data->_M_neg_format = _S_construct_pattern(__nprecedes, __nspace, 
-+							__nposn);
-+	}
-+    }
-+
-+  template<> 
-+    void
-+    moneypunct<char, false>::_M_initialize_moneypunct(__c_locale __cloc, 
-+						      const char*)
-+    {
-+      if (!_M_data)
-+	_M_data = new __moneypunct_cache<char, false>;
-+
-+      if (!__cloc)
-+	{
-+	  // "C" locale
-+	  _M_data->_M_decimal_point = '.';
-+	  _M_data->_M_thousands_sep = ',';
-+	  _M_data->_M_grouping = "";
-+	  _M_data->_M_grouping_size = 0;
-+	  _M_data->_M_curr_symbol = "";
-+	  _M_data->_M_curr_symbol_size = 0;
-+	  _M_data->_M_positive_sign = "";
-+	  _M_data->_M_positive_sign_size = 0;
-+	  _M_data->_M_negative_sign = "";
-+	  _M_data->_M_negative_sign_size = 0;
-+	  _M_data->_M_frac_digits = 0;
-+	  _M_data->_M_pos_format = money_base::_S_default_pattern;
-+	  _M_data->_M_neg_format = money_base::_S_default_pattern;
-+
-+	  for (size_t __i = 0; __i < money_base::_S_end; ++__i)
-+	    _M_data->_M_atoms[__i] = money_base::_S_atoms[__i];
-+	}
-+      else
-+	{
-+	  // Named locale.
-+	  _M_data->_M_decimal_point = *(__nl_langinfo_l(__MON_DECIMAL_POINT, 
-+							__cloc));
-+	  _M_data->_M_thousands_sep = *(__nl_langinfo_l(__MON_THOUSANDS_SEP, 
-+							__cloc));
-+	  _M_data->_M_grouping = __nl_langinfo_l(__MON_GROUPING, __cloc);
-+	  _M_data->_M_grouping_size = strlen(_M_data->_M_grouping);
-+	  _M_data->_M_positive_sign = __nl_langinfo_l(__POSITIVE_SIGN, __cloc);
-+	  _M_data->_M_positive_sign_size = strlen(_M_data->_M_positive_sign);
-+
-+	  char __nposn = *(__nl_langinfo_l(__N_SIGN_POSN, __cloc));
-+	  if (!__nposn)
-+	    _M_data->_M_negative_sign = "()";
-+	  else
-+	    _M_data->_M_negative_sign = __nl_langinfo_l(__NEGATIVE_SIGN,
-+							__cloc);
-+	  _M_data->_M_negative_sign_size = strlen(_M_data->_M_negative_sign);
-+
-+	  // _Intl == false
-+	  _M_data->_M_curr_symbol = __nl_langinfo_l(__CURRENCY_SYMBOL, __cloc);
-+	  _M_data->_M_curr_symbol_size = strlen(_M_data->_M_curr_symbol);
-+	  _M_data->_M_frac_digits = *(__nl_langinfo_l(__FRAC_DIGITS, __cloc));
-+	  char __pprecedes = *(__nl_langinfo_l(__P_CS_PRECEDES, __cloc));
-+	  char __pspace = *(__nl_langinfo_l(__P_SEP_BY_SPACE, __cloc));
-+	  char __pposn = *(__nl_langinfo_l(__P_SIGN_POSN, __cloc));
-+	  _M_data->_M_pos_format = _S_construct_pattern(__pprecedes, __pspace, 
-+							__pposn);
-+	  char __nprecedes = *(__nl_langinfo_l(__N_CS_PRECEDES, __cloc));
-+	  char __nspace = *(__nl_langinfo_l(__N_SEP_BY_SPACE, __cloc));
-+	  _M_data->_M_neg_format = _S_construct_pattern(__nprecedes, __nspace, 
-+							__nposn);
-+	}
-+    }
-+
-+  template<> 
-+    moneypunct<char, true>::~moneypunct()
-+    { delete _M_data; }
-+
-+  template<> 
-+    moneypunct<char, false>::~moneypunct()
-+    { delete _M_data; }
-+
-+#ifdef _GLIBCXX_USE_WCHAR_T
-+  template<> 
-+    void
-+    moneypunct<wchar_t, true>::_M_initialize_moneypunct(__c_locale __cloc, 
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+							const char*)
-+#else
-+							const char* __name)
-+#endif
-+    {
-+      if (!_M_data)
-+	_M_data = new __moneypunct_cache<wchar_t, true>;
-+
-+      if (!__cloc)
-+	{
-+	  // "C" locale
-+	  _M_data->_M_decimal_point = L'.';
-+	  _M_data->_M_thousands_sep = L',';
-+	  _M_data->_M_grouping = "";
-+	  _M_data->_M_grouping_size = 0;
-+	  _M_data->_M_curr_symbol = L"";
-+	  _M_data->_M_curr_symbol_size = 0;
-+	  _M_data->_M_positive_sign = L"";
-+	  _M_data->_M_positive_sign_size = 0;
-+	  _M_data->_M_negative_sign = L"";
-+	  _M_data->_M_negative_sign_size = 0;
-+	  _M_data->_M_frac_digits = 0;
-+	  _M_data->_M_pos_format = money_base::_S_default_pattern;
-+	  _M_data->_M_neg_format = money_base::_S_default_pattern;
-+
-+	  // Use ctype::widen code without the facet...
-+	  for (size_t __i = 0; __i < money_base::_S_end; ++__i)
-+	    _M_data->_M_atoms[__i] =
-+	      static_cast<wchar_t>(money_base::_S_atoms[__i]);
-+	}
-+      else
-+	{
-+	  // Named locale.
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+	  __c_locale __old = __uselocale(__cloc);
-+#else
-+	  // Switch to named locale so that mbsrtowcs will work.
-+	  char* __old = strdup(setlocale(LC_ALL, NULL));
-+	  setlocale(LC_ALL, __name);
-+#endif
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix this... should be monetary
-+#endif
-+#ifdef __UCLIBC__
-+# ifdef __UCLIBC_HAS_XLOCALE__
-+	  _M_data->_M_decimal_point = __cloc->decimal_point_wc;
-+	  _M_data->_M_thousands_sep = __cloc->thousands_sep_wc;
-+# elif defined __UCLIBC_HAS_LOCALE__
-+	  _M_data->_M_decimal_point = __global_locale->decimal_point_wc;
-+	  _M_data->_M_thousands_sep = __global_locale->thousands_sep_wc;
-+# endif
-+#else
-+	  union { char *__s; wchar_t __w; } __u;
-+	  __u.__s = __nl_langinfo_l(_NL_MONETARY_DECIMAL_POINT_WC, __cloc);
-+	  _M_data->_M_decimal_point = __u.__w;
-+
-+	  __u.__s = __nl_langinfo_l(_NL_MONETARY_THOUSANDS_SEP_WC, __cloc);
-+	  _M_data->_M_thousands_sep = __u.__w;
-+#endif
-+	  _M_data->_M_grouping = __nl_langinfo_l(__MON_GROUPING, __cloc);
-+	  _M_data->_M_grouping_size = strlen(_M_data->_M_grouping);
-+
-+	  const char* __cpossign = __nl_langinfo_l(__POSITIVE_SIGN, __cloc);
-+	  const char* __cnegsign = __nl_langinfo_l(__NEGATIVE_SIGN, __cloc);
-+	  const char* __ccurr = __nl_langinfo_l(__INT_CURR_SYMBOL, __cloc);
-+
-+	  wchar_t* __wcs_ps = 0;
-+	  wchar_t* __wcs_ns = 0;
-+	  const char __nposn = *(__nl_langinfo_l(__INT_N_SIGN_POSN, __cloc));
-+	  try
-+	    {
-+	      mbstate_t __state;
-+	      size_t __len = strlen(__cpossign);
-+	      if (__len)
-+		{
-+		  ++__len;
-+		  memset(&__state, 0, sizeof(mbstate_t));
-+		  __wcs_ps = new wchar_t[__len];
-+		  mbsrtowcs(__wcs_ps, &__cpossign, __len, &__state);
-+		  _M_data->_M_positive_sign = __wcs_ps;
-+		}
-+	      else
-+		_M_data->_M_positive_sign = L"";
-+	      _M_data->_M_positive_sign_size = wcslen(_M_data->_M_positive_sign);
-+	      
-+	      __len = strlen(__cnegsign);
-+	      if (!__nposn)
-+		_M_data->_M_negative_sign = L"()";
-+	      else if (__len)
-+		{ 
-+		  ++__len;
-+		  memset(&__state, 0, sizeof(mbstate_t));
-+		  __wcs_ns = new wchar_t[__len];
-+		  mbsrtowcs(__wcs_ns, &__cnegsign, __len, &__state);
-+		  _M_data->_M_negative_sign = __wcs_ns;
-+		}
-+	      else
-+		_M_data->_M_negative_sign = L"";
-+	      _M_data->_M_negative_sign_size = wcslen(_M_data->_M_negative_sign);
-+	      
-+	      // _Intl == true.
-+	      __len = strlen(__ccurr);
-+	      if (__len)
-+		{
-+		  ++__len;
-+		  memset(&__state, 0, sizeof(mbstate_t));
-+		  wchar_t* __wcs = new wchar_t[__len];
-+		  mbsrtowcs(__wcs, &__ccurr, __len, &__state);
-+		  _M_data->_M_curr_symbol = __wcs;
-+		}
-+	      else
-+		_M_data->_M_curr_symbol = L"";
-+	      _M_data->_M_curr_symbol_size = wcslen(_M_data->_M_curr_symbol);
-+	    }
-+	  catch (...)
-+	    {
-+	      delete _M_data;
-+	      _M_data = 0;
-+	      delete __wcs_ps;
-+	      delete __wcs_ns;	      
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+	      __uselocale(__old);
-+#else
-+	      setlocale(LC_ALL, __old);
-+	      free(__old);
-+#endif
-+	      __throw_exception_again;
-+	    } 
-+	  
-+	  _M_data->_M_frac_digits = *(__nl_langinfo_l(__INT_FRAC_DIGITS, 
-+						      __cloc));
-+	  char __pprecedes = *(__nl_langinfo_l(__INT_P_CS_PRECEDES, __cloc));
-+	  char __pspace = *(__nl_langinfo_l(__INT_P_SEP_BY_SPACE, __cloc));
-+	  char __pposn = *(__nl_langinfo_l(__INT_P_SIGN_POSN, __cloc));
-+	  _M_data->_M_pos_format = _S_construct_pattern(__pprecedes, __pspace, 
-+							__pposn);
-+	  char __nprecedes = *(__nl_langinfo_l(__INT_N_CS_PRECEDES, __cloc));
-+	  char __nspace = *(__nl_langinfo_l(__INT_N_SEP_BY_SPACE, __cloc));
-+	  _M_data->_M_neg_format = _S_construct_pattern(__nprecedes, __nspace, 
-+							__nposn);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+	  __uselocale(__old);
-+#else
-+	  setlocale(LC_ALL, __old);
-+	  free(__old);
-+#endif
-+	}
-+    }
-+
-+  template<> 
-+  void
-+  moneypunct<wchar_t, false>::_M_initialize_moneypunct(__c_locale __cloc,
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+						       const char*)
-+#else
-+                                                       const char* __name)
-+#endif
-+  {
-+    if (!_M_data)
-+      _M_data = new __moneypunct_cache<wchar_t, false>;
-+
-+    if (!__cloc)
-+	{
-+	  // "C" locale
-+	  _M_data->_M_decimal_point = L'.';
-+	  _M_data->_M_thousands_sep = L',';
-+	  _M_data->_M_grouping = "";
-+          _M_data->_M_grouping_size = 0;
-+	  _M_data->_M_curr_symbol = L"";
-+	  _M_data->_M_curr_symbol_size = 0;
-+	  _M_data->_M_positive_sign = L"";
-+	  _M_data->_M_positive_sign_size = 0;
-+	  _M_data->_M_negative_sign = L"";
-+	  _M_data->_M_negative_sign_size = 0;
-+	  _M_data->_M_frac_digits = 0;
-+	  _M_data->_M_pos_format = money_base::_S_default_pattern;
-+	  _M_data->_M_neg_format = money_base::_S_default_pattern;
-+
-+	  // Use ctype::widen code without the facet...
-+	  for (size_t __i = 0; __i < money_base::_S_end; ++__i)
-+	    _M_data->_M_atoms[__i] =
-+	      static_cast<wchar_t>(money_base::_S_atoms[__i]);
-+	}
-+      else
-+	{
-+	  // Named locale.
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+	  __c_locale __old = __uselocale(__cloc);
-+#else
-+	  // Switch to named locale so that mbsrtowcs will work.
-+	  char* __old = strdup(setlocale(LC_ALL, NULL));
-+	  setlocale(LC_ALL, __name);
-+#endif
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix this... should be monetary
-+#endif
-+#ifdef __UCLIBC__
-+# ifdef __UCLIBC_HAS_XLOCALE__
-+	  _M_data->_M_decimal_point = __cloc->decimal_point_wc;
-+	  _M_data->_M_thousands_sep = __cloc->thousands_sep_wc;
-+# elif defined __UCLIBC_HAS_LOCALE__
-+	  _M_data->_M_decimal_point = __global_locale->decimal_point_wc;
-+	  _M_data->_M_thousands_sep = __global_locale->thousands_sep_wc;
-+# endif
-+#else
-+          union { char *__s; wchar_t __w; } __u;
-+	  __u.__s = __nl_langinfo_l(_NL_MONETARY_DECIMAL_POINT_WC, __cloc);
-+	  _M_data->_M_decimal_point = __u.__w;
-+
-+	  __u.__s = __nl_langinfo_l(_NL_MONETARY_THOUSANDS_SEP_WC, __cloc);
-+	  _M_data->_M_thousands_sep = __u.__w;
-+#endif
-+	  _M_data->_M_grouping = __nl_langinfo_l(__MON_GROUPING, __cloc);
-+          _M_data->_M_grouping_size = strlen(_M_data->_M_grouping);
-+
-+	  const char* __cpossign = __nl_langinfo_l(__POSITIVE_SIGN, __cloc);
-+	  const char* __cnegsign = __nl_langinfo_l(__NEGATIVE_SIGN, __cloc);
-+	  const char* __ccurr = __nl_langinfo_l(__CURRENCY_SYMBOL, __cloc);
-+
-+	  wchar_t* __wcs_ps = 0;
-+	  wchar_t* __wcs_ns = 0;
-+	  const char __nposn = *(__nl_langinfo_l(__N_SIGN_POSN, __cloc));
-+	  try
-+            {
-+              mbstate_t __state;
-+              size_t __len;
-+              __len = strlen(__cpossign);
-+              if (__len)
-+                {
-+		  ++__len;
-+		  memset(&__state, 0, sizeof(mbstate_t));
-+		  __wcs_ps = new wchar_t[__len];
-+		  mbsrtowcs(__wcs_ps, &__cpossign, __len, &__state);
-+		  _M_data->_M_positive_sign = __wcs_ps;
-+		}
-+	      else
-+		_M_data->_M_positive_sign = L"";
-+              _M_data->_M_positive_sign_size = wcslen(_M_data->_M_positive_sign);
-+	      
-+	      __len = strlen(__cnegsign);
-+	      if (!__nposn)
-+		_M_data->_M_negative_sign = L"()";
-+	      else if (__len)
-+		{ 
-+		  ++__len;
-+		  memset(&__state, 0, sizeof(mbstate_t));
-+		  __wcs_ns = new wchar_t[__len];
-+		  mbsrtowcs(__wcs_ns, &__cnegsign, __len, &__state);
-+		  _M_data->_M_negative_sign = __wcs_ns;
-+		}
-+	      else
-+		_M_data->_M_negative_sign = L"";
-+              _M_data->_M_negative_sign_size = wcslen(_M_data->_M_negative_sign);
-+
-+	      // _Intl == true.
-+	      __len = strlen(__ccurr);
-+	      if (__len)
-+		{
-+		  ++__len;
-+		  memset(&__state, 0, sizeof(mbstate_t));
-+		  wchar_t* __wcs = new wchar_t[__len];
-+		  mbsrtowcs(__wcs, &__ccurr, __len, &__state);
-+		  _M_data->_M_curr_symbol = __wcs;
-+		}
-+	      else
-+		_M_data->_M_curr_symbol = L"";
-+              _M_data->_M_curr_symbol_size = wcslen(_M_data->_M_curr_symbol);
-+	    }
-+          catch (...)
-+	    {
-+	      delete _M_data;
-+              _M_data = 0;
-+	      delete __wcs_ps;
-+	      delete __wcs_ns;	      
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+	      __uselocale(__old);
-+#else
-+	      setlocale(LC_ALL, __old);
-+	      free(__old);
-+#endif
-+              __throw_exception_again;
-+	    }
-+
-+	  _M_data->_M_frac_digits = *(__nl_langinfo_l(__FRAC_DIGITS, __cloc));
-+	  char __pprecedes = *(__nl_langinfo_l(__P_CS_PRECEDES, __cloc));
-+	  char __pspace = *(__nl_langinfo_l(__P_SEP_BY_SPACE, __cloc));
-+	  char __pposn = *(__nl_langinfo_l(__P_SIGN_POSN, __cloc));
-+	  _M_data->_M_pos_format = _S_construct_pattern(__pprecedes, __pspace, 
-+	                                                __pposn);
-+	  char __nprecedes = *(__nl_langinfo_l(__N_CS_PRECEDES, __cloc));
-+	  char __nspace = *(__nl_langinfo_l(__N_SEP_BY_SPACE, __cloc));
-+	  _M_data->_M_neg_format = _S_construct_pattern(__nprecedes, __nspace, 
-+	                                                __nposn);
-+
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+	  __uselocale(__old);
-+#else
-+	  setlocale(LC_ALL, __old);
-+	  free(__old);
-+#endif
-+	}
-+    }
-+
-+  template<> 
-+    moneypunct<wchar_t, true>::~moneypunct()
-+    {
-+      if (_M_data->_M_positive_sign_size)
-+	delete [] _M_data->_M_positive_sign;
-+      if (_M_data->_M_negative_sign_size
-+          && wcscmp(_M_data->_M_negative_sign, L"()") != 0)
-+	delete [] _M_data->_M_negative_sign;
-+      if (_M_data->_M_curr_symbol_size)
-+	delete [] _M_data->_M_curr_symbol;
-+      delete _M_data;
-+    }
-+
-+  template<> 
-+    moneypunct<wchar_t, false>::~moneypunct()
-+    {
-+      if (_M_data->_M_positive_sign_size)
-+	delete [] _M_data->_M_positive_sign;
-+      if (_M_data->_M_negative_sign_size
-+          && wcscmp(_M_data->_M_negative_sign, L"()") != 0)
-+	delete [] _M_data->_M_negative_sign;
-+      if (_M_data->_M_curr_symbol_size)
-+	delete [] _M_data->_M_curr_symbol;
-+      delete _M_data;
-+    }
-+#endif
-+}
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/numeric_members.cc
-@@ -0,0 +1,173 @@
-+// std::numpunct implementation details, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.3.1.2  numpunct virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#define _LIBC
-+#include <locale>
-+#undef _LIBC
-+#include <bits/c++locale_internal.h>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning tailor for stub locale support
-+#endif
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __nl_langinfo_l(N, L)         nl_langinfo((N))
-+#endif
-+
-+namespace std
-+{
-+  template<> 
-+    void
-+    numpunct<char>::_M_initialize_numpunct(__c_locale __cloc)
-+    {
-+      if (!_M_data)
-+	_M_data = new __numpunct_cache<char>;
-+
-+      if (!__cloc)
-+	{
-+	  // "C" locale
-+	  _M_data->_M_grouping = "";
-+	  _M_data->_M_grouping_size = 0;
-+	  _M_data->_M_use_grouping = false;
-+
-+	  _M_data->_M_decimal_point = '.';
-+	  _M_data->_M_thousands_sep = ',';
-+
-+	  for (size_t __i = 0; __i < __num_base::_S_oend; ++__i)
-+	    _M_data->_M_atoms_out[__i] = __num_base::_S_atoms_out[__i];
-+
-+	  for (size_t __j = 0; __j < __num_base::_S_iend; ++__j)
-+	    _M_data->_M_atoms_in[__j] = __num_base::_S_atoms_in[__j];
-+	}
-+      else
-+	{
-+	  // Named locale.
-+	  _M_data->_M_decimal_point = *(__nl_langinfo_l(DECIMAL_POINT, 
-+							__cloc));
-+	  _M_data->_M_thousands_sep = *(__nl_langinfo_l(THOUSANDS_SEP, 
-+							__cloc));
-+
-+	  // Check for NULL, which implies no grouping.
-+	  if (_M_data->_M_thousands_sep == '\0')
-+	    _M_data->_M_grouping = "";
-+	  else
-+	    _M_data->_M_grouping = __nl_langinfo_l(GROUPING, __cloc);
-+	  _M_data->_M_grouping_size = strlen(_M_data->_M_grouping);
-+	}
-+
-+      // NB: There is no way to extact this info from posix locales.
-+      // _M_truename = __nl_langinfo_l(YESSTR, __cloc);
-+      _M_data->_M_truename = "true";
-+      _M_data->_M_truename_size = 4;
-+      // _M_falsename = __nl_langinfo_l(NOSTR, __cloc);
-+      _M_data->_M_falsename = "false";
-+      _M_data->_M_falsename_size = 5;
-+    }
-+ 
-+  template<> 
-+    numpunct<char>::~numpunct()
-+    { delete _M_data; }
-+   
-+#ifdef _GLIBCXX_USE_WCHAR_T
-+  template<> 
-+    void
-+    numpunct<wchar_t>::_M_initialize_numpunct(__c_locale __cloc)
-+    {
-+      if (!_M_data)
-+	_M_data = new __numpunct_cache<wchar_t>;
-+
-+      if (!__cloc)
-+	{
-+	  // "C" locale
-+	  _M_data->_M_grouping = "";
-+	  _M_data->_M_grouping_size = 0;
-+	  _M_data->_M_use_grouping = false;
-+
-+	  _M_data->_M_decimal_point = L'.';
-+	  _M_data->_M_thousands_sep = L',';
-+
-+	  // Use ctype::widen code without the facet...
-+	  for (size_t __i = 0; __i < __num_base::_S_oend; ++__i)
-+	    _M_data->_M_atoms_out[__i] =
-+	      static_cast<wchar_t>(__num_base::_S_atoms_out[__i]);
-+
-+	  for (size_t __j = 0; __j < __num_base::_S_iend; ++__j)
-+	    _M_data->_M_atoms_in[__j] =
-+	      static_cast<wchar_t>(__num_base::_S_atoms_in[__j]);
-+	}
-+      else
-+	{
-+	  // Named locale.
-+	  // NB: In the GNU model wchar_t is always 32 bit wide.
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning fix this
-+#endif
-+#ifdef __UCLIBC__
-+# ifdef __UCLIBC_HAS_XLOCALE__
-+	  _M_data->_M_decimal_point = __cloc->decimal_point_wc;
-+	  _M_data->_M_thousands_sep = __cloc->thousands_sep_wc;
-+# elif defined __UCLIBC_HAS_LOCALE__
-+	  _M_data->_M_decimal_point = __global_locale->decimal_point_wc;
-+	  _M_data->_M_thousands_sep = __global_locale->thousands_sep_wc;
-+# endif
-+#else
-+	  union { char *__s; wchar_t __w; } __u;
-+	  __u.__s = __nl_langinfo_l(_NL_NUMERIC_DECIMAL_POINT_WC, __cloc);
-+	  _M_data->_M_decimal_point = __u.__w;
-+
-+	  __u.__s = __nl_langinfo_l(_NL_NUMERIC_THOUSANDS_SEP_WC, __cloc);
-+	  _M_data->_M_thousands_sep = __u.__w;
-+#endif
-+
-+	  if (_M_data->_M_thousands_sep == L'\0')
-+	    _M_data->_M_grouping = "";
-+	  else
-+	    _M_data->_M_grouping = __nl_langinfo_l(GROUPING, __cloc);
-+	  _M_data->_M_grouping_size = strlen(_M_data->_M_grouping);
-+	}
-+
-+      // NB: There is no way to extact this info from posix locales.
-+      // _M_truename = __nl_langinfo_l(YESSTR, __cloc);
-+      _M_data->_M_truename = L"true";
-+      _M_data->_M_truename_size = 4;
-+      // _M_falsename = __nl_langinfo_l(NOSTR, __cloc);
-+      _M_data->_M_falsename = L"false";
-+      _M_data->_M_falsename_size = 5;
-+    }
-+
-+  template<> 
-+    numpunct<wchar_t>::~numpunct()
-+    { delete _M_data; }
-+ #endif
-+}
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/time_members.cc
-@@ -0,0 +1,406 @@
-+// std::time_get, std::time_put implementation, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.5.1.2 - time_get virtual functions
-+// ISO C++ 14882: 22.2.5.3.2 - time_put virtual functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+#include <locale>
-+#include <bits/c++locale_internal.h>
-+
-+#ifdef __UCLIBC_MJN3_ONLY__
-+#warning tailor for stub locale support
-+#endif
-+#ifndef __UCLIBC_HAS_XLOCALE__
-+#define __nl_langinfo_l(N, L)         nl_langinfo((N))
-+#endif
-+
-+namespace std
-+{
-+  template<>
-+    void
-+    __timepunct<char>::
-+    _M_put(char* __s, size_t __maxlen, const char* __format, 
-+	   const tm* __tm) const
-+    {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+      const size_t __len = __strftime_l(__s, __maxlen, __format, __tm,
-+					_M_c_locale_timepunct);
-+#else
-+      char* __old = strdup(setlocale(LC_ALL, NULL));
-+      setlocale(LC_ALL, _M_name_timepunct);
-+      const size_t __len = strftime(__s, __maxlen, __format, __tm);
-+      setlocale(LC_ALL, __old);
-+      free(__old);
-+#endif
-+      // Make sure __s is null terminated.
-+      if (__len == 0)
-+	__s[0] = '\0';
-+    }
-+
-+  template<> 
-+    void
-+    __timepunct<char>::_M_initialize_timepunct(__c_locale __cloc)
-+    {
-+      if (!_M_data)
-+	_M_data = new __timepunct_cache<char>;
-+
-+      if (!__cloc)
-+	{
-+	  // "C" locale
-+	  _M_c_locale_timepunct = _S_get_c_locale();
-+
-+	  _M_data->_M_date_format = "%m/%d/%y";
-+	  _M_data->_M_date_era_format = "%m/%d/%y";
-+	  _M_data->_M_time_format = "%H:%M:%S";
-+	  _M_data->_M_time_era_format = "%H:%M:%S";
-+	  _M_data->_M_date_time_format = "";
-+	  _M_data->_M_date_time_era_format = "";
-+	  _M_data->_M_am = "AM";
-+	  _M_data->_M_pm = "PM";
-+	  _M_data->_M_am_pm_format = "";
-+
-+	  // Day names, starting with "C"'s Sunday.
-+	  _M_data->_M_day1 = "Sunday";
-+	  _M_data->_M_day2 = "Monday";
-+	  _M_data->_M_day3 = "Tuesday";
-+	  _M_data->_M_day4 = "Wednesday";
-+	  _M_data->_M_day5 = "Thursday";
-+	  _M_data->_M_day6 = "Friday";
-+	  _M_data->_M_day7 = "Saturday";
-+
-+	  // Abbreviated day names, starting with "C"'s Sun.
-+	  _M_data->_M_aday1 = "Sun";
-+	  _M_data->_M_aday2 = "Mon";
-+	  _M_data->_M_aday3 = "Tue";
-+	  _M_data->_M_aday4 = "Wed";
-+	  _M_data->_M_aday5 = "Thu";
-+	  _M_data->_M_aday6 = "Fri";
-+	  _M_data->_M_aday7 = "Sat";
-+
-+	  // Month names, starting with "C"'s January.
-+	  _M_data->_M_month01 = "January";
-+	  _M_data->_M_month02 = "February";
-+	  _M_data->_M_month03 = "March";
-+	  _M_data->_M_month04 = "April";
-+	  _M_data->_M_month05 = "May";
-+	  _M_data->_M_month06 = "June";
-+	  _M_data->_M_month07 = "July";
-+	  _M_data->_M_month08 = "August";
-+	  _M_data->_M_month09 = "September";
-+	  _M_data->_M_month10 = "October";
-+	  _M_data->_M_month11 = "November";
-+	  _M_data->_M_month12 = "December";
-+
-+	  // Abbreviated month names, starting with "C"'s Jan.
-+	  _M_data->_M_amonth01 = "Jan";
-+	  _M_data->_M_amonth02 = "Feb";
-+	  _M_data->_M_amonth03 = "Mar";
-+	  _M_data->_M_amonth04 = "Apr";
-+	  _M_data->_M_amonth05 = "May";
-+	  _M_data->_M_amonth06 = "Jun";
-+	  _M_data->_M_amonth07 = "Jul";
-+	  _M_data->_M_amonth08 = "Aug";
-+	  _M_data->_M_amonth09 = "Sep";
-+	  _M_data->_M_amonth10 = "Oct";
-+	  _M_data->_M_amonth11 = "Nov";
-+	  _M_data->_M_amonth12 = "Dec";
-+	}
-+      else
-+	{
-+	  _M_c_locale_timepunct = _S_clone_c_locale(__cloc); 
-+
-+	  _M_data->_M_date_format = __nl_langinfo_l(D_FMT, __cloc);
-+	  _M_data->_M_date_era_format = __nl_langinfo_l(ERA_D_FMT, __cloc);
-+	  _M_data->_M_time_format = __nl_langinfo_l(T_FMT, __cloc);
-+	  _M_data->_M_time_era_format = __nl_langinfo_l(ERA_T_FMT, __cloc);
-+	  _M_data->_M_date_time_format = __nl_langinfo_l(D_T_FMT, __cloc);
-+	  _M_data->_M_date_time_era_format = __nl_langinfo_l(ERA_D_T_FMT,
-+							     __cloc);
-+	  _M_data->_M_am = __nl_langinfo_l(AM_STR, __cloc);
-+	  _M_data->_M_pm = __nl_langinfo_l(PM_STR, __cloc);
-+	  _M_data->_M_am_pm_format = __nl_langinfo_l(T_FMT_AMPM, __cloc);
-+
-+	  // Day names, starting with "C"'s Sunday.
-+	  _M_data->_M_day1 = __nl_langinfo_l(DAY_1, __cloc);
-+	  _M_data->_M_day2 = __nl_langinfo_l(DAY_2, __cloc);
-+	  _M_data->_M_day3 = __nl_langinfo_l(DAY_3, __cloc);
-+	  _M_data->_M_day4 = __nl_langinfo_l(DAY_4, __cloc);
-+	  _M_data->_M_day5 = __nl_langinfo_l(DAY_5, __cloc);
-+	  _M_data->_M_day6 = __nl_langinfo_l(DAY_6, __cloc);
-+	  _M_data->_M_day7 = __nl_langinfo_l(DAY_7, __cloc);
-+
-+	  // Abbreviated day names, starting with "C"'s Sun.
-+	  _M_data->_M_aday1 = __nl_langinfo_l(ABDAY_1, __cloc);
-+	  _M_data->_M_aday2 = __nl_langinfo_l(ABDAY_2, __cloc);
-+	  _M_data->_M_aday3 = __nl_langinfo_l(ABDAY_3, __cloc);
-+	  _M_data->_M_aday4 = __nl_langinfo_l(ABDAY_4, __cloc);
-+	  _M_data->_M_aday5 = __nl_langinfo_l(ABDAY_5, __cloc);
-+	  _M_data->_M_aday6 = __nl_langinfo_l(ABDAY_6, __cloc);
-+	  _M_data->_M_aday7 = __nl_langinfo_l(ABDAY_7, __cloc);
-+
-+	  // Month names, starting with "C"'s January.
-+	  _M_data->_M_month01 = __nl_langinfo_l(MON_1, __cloc);
-+	  _M_data->_M_month02 = __nl_langinfo_l(MON_2, __cloc);
-+	  _M_data->_M_month03 = __nl_langinfo_l(MON_3, __cloc);
-+	  _M_data->_M_month04 = __nl_langinfo_l(MON_4, __cloc);
-+	  _M_data->_M_month05 = __nl_langinfo_l(MON_5, __cloc);
-+	  _M_data->_M_month06 = __nl_langinfo_l(MON_6, __cloc);
-+	  _M_data->_M_month07 = __nl_langinfo_l(MON_7, __cloc);
-+	  _M_data->_M_month08 = __nl_langinfo_l(MON_8, __cloc);
-+	  _M_data->_M_month09 = __nl_langinfo_l(MON_9, __cloc);
-+	  _M_data->_M_month10 = __nl_langinfo_l(MON_10, __cloc);
-+	  _M_data->_M_month11 = __nl_langinfo_l(MON_11, __cloc);
-+	  _M_data->_M_month12 = __nl_langinfo_l(MON_12, __cloc);
-+
-+	  // Abbreviated month names, starting with "C"'s Jan.
-+	  _M_data->_M_amonth01 = __nl_langinfo_l(ABMON_1, __cloc);
-+	  _M_data->_M_amonth02 = __nl_langinfo_l(ABMON_2, __cloc);
-+	  _M_data->_M_amonth03 = __nl_langinfo_l(ABMON_3, __cloc);
-+	  _M_data->_M_amonth04 = __nl_langinfo_l(ABMON_4, __cloc);
-+	  _M_data->_M_amonth05 = __nl_langinfo_l(ABMON_5, __cloc);
-+	  _M_data->_M_amonth06 = __nl_langinfo_l(ABMON_6, __cloc);
-+	  _M_data->_M_amonth07 = __nl_langinfo_l(ABMON_7, __cloc);
-+	  _M_data->_M_amonth08 = __nl_langinfo_l(ABMON_8, __cloc);
-+	  _M_data->_M_amonth09 = __nl_langinfo_l(ABMON_9, __cloc);
-+	  _M_data->_M_amonth10 = __nl_langinfo_l(ABMON_10, __cloc);
-+	  _M_data->_M_amonth11 = __nl_langinfo_l(ABMON_11, __cloc);
-+	  _M_data->_M_amonth12 = __nl_langinfo_l(ABMON_12, __cloc);
-+	}
-+    }
-+
-+#ifdef _GLIBCXX_USE_WCHAR_T
-+  template<>
-+    void
-+    __timepunct<wchar_t>::
-+    _M_put(wchar_t* __s, size_t __maxlen, const wchar_t* __format, 
-+	   const tm* __tm) const
-+    {
-+#ifdef __UCLIBC_HAS_XLOCALE__
-+      __wcsftime_l(__s, __maxlen, __format, __tm, _M_c_locale_timepunct);
-+      const size_t __len = __wcsftime_l(__s, __maxlen, __format, __tm,
-+					_M_c_locale_timepunct);
-+#else
-+      char* __old = strdup(setlocale(LC_ALL, NULL));
-+      setlocale(LC_ALL, _M_name_timepunct);
-+      const size_t __len = wcsftime(__s, __maxlen, __format, __tm);
-+      setlocale(LC_ALL, __old);
-+      free(__old);
-+#endif
-+      // Make sure __s is null terminated.
-+      if (__len == 0)
-+	__s[0] = L'\0';
-+    }
-+
-+  template<> 
-+    void
-+    __timepunct<wchar_t>::_M_initialize_timepunct(__c_locale __cloc)
-+    {
-+      if (!_M_data)
-+	_M_data = new __timepunct_cache<wchar_t>;
-+
-+#warning wide time stuff
-+//       if (!__cloc)
-+	{
-+	  // "C" locale
-+	  _M_c_locale_timepunct = _S_get_c_locale();
-+
-+	  _M_data->_M_date_format = L"%m/%d/%y";
-+	  _M_data->_M_date_era_format = L"%m/%d/%y";
-+	  _M_data->_M_time_format = L"%H:%M:%S";
-+	  _M_data->_M_time_era_format = L"%H:%M:%S";
-+	  _M_data->_M_date_time_format = L"";
-+	  _M_data->_M_date_time_era_format = L"";
-+	  _M_data->_M_am = L"AM";
-+	  _M_data->_M_pm = L"PM";
-+	  _M_data->_M_am_pm_format = L"";
-+
-+	  // Day names, starting with "C"'s Sunday.
-+	  _M_data->_M_day1 = L"Sunday";
-+	  _M_data->_M_day2 = L"Monday";
-+	  _M_data->_M_day3 = L"Tuesday";
-+	  _M_data->_M_day4 = L"Wednesday";
-+	  _M_data->_M_day5 = L"Thursday";
-+	  _M_data->_M_day6 = L"Friday";
-+	  _M_data->_M_day7 = L"Saturday";
-+
-+	  // Abbreviated day names, starting with "C"'s Sun.
-+	  _M_data->_M_aday1 = L"Sun";
-+	  _M_data->_M_aday2 = L"Mon";
-+	  _M_data->_M_aday3 = L"Tue";
-+	  _M_data->_M_aday4 = L"Wed";
-+	  _M_data->_M_aday5 = L"Thu";
-+	  _M_data->_M_aday6 = L"Fri";
-+	  _M_data->_M_aday7 = L"Sat";
-+
-+	  // Month names, starting with "C"'s January.
-+	  _M_data->_M_month01 = L"January";
-+	  _M_data->_M_month02 = L"February";
-+	  _M_data->_M_month03 = L"March";
-+	  _M_data->_M_month04 = L"April";
-+	  _M_data->_M_month05 = L"May";
-+	  _M_data->_M_month06 = L"June";
-+	  _M_data->_M_month07 = L"July";
-+	  _M_data->_M_month08 = L"August";
-+	  _M_data->_M_month09 = L"September";
-+	  _M_data->_M_month10 = L"October";
-+	  _M_data->_M_month11 = L"November";
-+	  _M_data->_M_month12 = L"December";
-+
-+	  // Abbreviated month names, starting with "C"'s Jan.
-+	  _M_data->_M_amonth01 = L"Jan";
-+	  _M_data->_M_amonth02 = L"Feb";
-+	  _M_data->_M_amonth03 = L"Mar";
-+	  _M_data->_M_amonth04 = L"Apr";
-+	  _M_data->_M_amonth05 = L"May";
-+	  _M_data->_M_amonth06 = L"Jun";
-+	  _M_data->_M_amonth07 = L"Jul";
-+	  _M_data->_M_amonth08 = L"Aug";
-+	  _M_data->_M_amonth09 = L"Sep";
-+	  _M_data->_M_amonth10 = L"Oct";
-+	  _M_data->_M_amonth11 = L"Nov";
-+	  _M_data->_M_amonth12 = L"Dec";
-+	}
-+#if 0
-+      else
-+	{
-+	  _M_c_locale_timepunct = _S_clone_c_locale(__cloc); 
-+
-+	  union { char *__s; wchar_t *__w; } __u;
-+
-+	  __u.__s = __nl_langinfo_l(_NL_WD_FMT, __cloc);
-+	  _M_data->_M_date_format = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WERA_D_FMT, __cloc);
-+	  _M_data->_M_date_era_format = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WT_FMT, __cloc);
-+	  _M_data->_M_time_format = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WERA_T_FMT, __cloc);
-+	  _M_data->_M_time_era_format = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WD_T_FMT, __cloc);
-+	  _M_data->_M_date_time_format = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WERA_D_T_FMT, __cloc);
-+	  _M_data->_M_date_time_era_format = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WAM_STR, __cloc);
-+	  _M_data->_M_am = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WPM_STR, __cloc);
-+	  _M_data->_M_pm = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WT_FMT_AMPM, __cloc);
-+	  _M_data->_M_am_pm_format = __u.__w;
-+
-+	  // Day names, starting with "C"'s Sunday.
-+	  __u.__s = __nl_langinfo_l(_NL_WDAY_1, __cloc);
-+	  _M_data->_M_day1 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WDAY_2, __cloc);
-+	  _M_data->_M_day2 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WDAY_3, __cloc);
-+	  _M_data->_M_day3 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WDAY_4, __cloc);
-+	  _M_data->_M_day4 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WDAY_5, __cloc);
-+	  _M_data->_M_day5 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WDAY_6, __cloc);
-+	  _M_data->_M_day6 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WDAY_7, __cloc);
-+	  _M_data->_M_day7 = __u.__w;
-+
-+	  // Abbreviated day names, starting with "C"'s Sun.
-+	  __u.__s = __nl_langinfo_l(_NL_WABDAY_1, __cloc);
-+	  _M_data->_M_aday1 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABDAY_2, __cloc);
-+	  _M_data->_M_aday2 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABDAY_3, __cloc);
-+	  _M_data->_M_aday3 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABDAY_4, __cloc);
-+	  _M_data->_M_aday4 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABDAY_5, __cloc);
-+	  _M_data->_M_aday5 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABDAY_6, __cloc);
-+	  _M_data->_M_aday6 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABDAY_7, __cloc);
-+	  _M_data->_M_aday7 = __u.__w;
-+
-+	  // Month names, starting with "C"'s January.
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_1, __cloc);
-+	  _M_data->_M_month01 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_2, __cloc);
-+	  _M_data->_M_month02 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_3, __cloc);
-+	  _M_data->_M_month03 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_4, __cloc);
-+	  _M_data->_M_month04 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_5, __cloc);
-+	  _M_data->_M_month05 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_6, __cloc);
-+	  _M_data->_M_month06 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_7, __cloc);
-+	  _M_data->_M_month07 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_8, __cloc);
-+	  _M_data->_M_month08 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_9, __cloc);
-+	  _M_data->_M_month09 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_10, __cloc);
-+	  _M_data->_M_month10 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_11, __cloc);
-+	  _M_data->_M_month11 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WMON_12, __cloc);
-+	  _M_data->_M_month12 = __u.__w;
-+
-+	  // Abbreviated month names, starting with "C"'s Jan.
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_1, __cloc);
-+	  _M_data->_M_amonth01 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_2, __cloc);
-+	  _M_data->_M_amonth02 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_3, __cloc);
-+	  _M_data->_M_amonth03 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_4, __cloc);
-+	  _M_data->_M_amonth04 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_5, __cloc);
-+	  _M_data->_M_amonth05 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_6, __cloc);
-+	  _M_data->_M_amonth06 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_7, __cloc);
-+	  _M_data->_M_amonth07 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_8, __cloc);
-+	  _M_data->_M_amonth08 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_9, __cloc);
-+	  _M_data->_M_amonth09 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_10, __cloc);
-+	  _M_data->_M_amonth10 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_11, __cloc);
-+	  _M_data->_M_amonth11 = __u.__w;
-+	  __u.__s = __nl_langinfo_l(_NL_WABMON_12, __cloc);
-+	  _M_data->_M_amonth12 = __u.__w;
-+	}
-+#endif // 0
-+    }
-+#endif
-+}
---- /dev/null
-+++ b/libstdc++-v3/config/locale/uclibc/time_members.h
-@@ -0,0 +1,76 @@
-+// std::time_get, std::time_put implementation, GNU version -*- C++ -*-
-+
-+// Copyright (C) 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.2.5.1.2 - time_get functions
-+// ISO C++ 14882: 22.2.5.3.2 - time_put functions
-+//
-+
-+// Written by Benjamin Kosnik <bkoz@redhat.com>
-+
-+  template<typename _CharT>
-+    __timepunct<_CharT>::__timepunct(size_t __refs) 
-+    : facet(__refs), _M_data(NULL), _M_c_locale_timepunct(NULL), 
-+      _M_name_timepunct(_S_get_c_name())
-+    { _M_initialize_timepunct(); }
-+
-+  template<typename _CharT>
-+    __timepunct<_CharT>::__timepunct(__cache_type* __cache, size_t __refs) 
-+    : facet(__refs), _M_data(__cache), _M_c_locale_timepunct(NULL), 
-+      _M_name_timepunct(_S_get_c_name())
-+    { _M_initialize_timepunct(); }
-+
-+  template<typename _CharT>
-+    __timepunct<_CharT>::__timepunct(__c_locale __cloc, const char* __s,
-+				     size_t __refs) 
-+    : facet(__refs), _M_data(NULL), _M_c_locale_timepunct(NULL), 
-+      _M_name_timepunct(NULL)
-+    { 
-+      const size_t __len = std::strlen(__s) + 1;
-+      char* __tmp = new char[__len];
-+      std::memcpy(__tmp, __s, __len);
-+      _M_name_timepunct = __tmp;
-+
-+      try
-+	{ _M_initialize_timepunct(__cloc); }
-+      catch(...)
-+	{
-+	  delete [] _M_name_timepunct;
-+	  __throw_exception_again;
-+	}
-+    }
-+
-+  template<typename _CharT>
-+    __timepunct<_CharT>::~__timepunct()
-+    { 
-+      if (_M_name_timepunct != _S_get_c_name())
-+	delete [] _M_name_timepunct;
-+      delete _M_data; 
-+      _S_destroy_c_locale(_M_c_locale_timepunct); 
-+    }
---- /dev/null
-+++ b/libstdc++-v3/config/os/uclibc/ctype_base.h
-@@ -0,0 +1,64 @@
-+// Locale support -*- C++ -*-
-+
-+// Copyright (C) 1997, 1998, 1999, 2000, 2002, 2003, 2004
-+// Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.1  Locales
-+//
-+  
-+/** @file ctype_base.h
-+ *  This is an internal header file, included by other library headers.
-+ *  You should not attempt to use it directly.
-+ */
-+
-+// Information as gleaned from /usr/include/ctype.h
-+  
-+  /// @brief  Base class for ctype.
-+  struct ctype_base
-+  {
-+    // Note: In uClibc, the following two types depend on configuration.
-+ 
-+    // Non-standard typedefs.
-+    typedef const __ctype_touplow_t* __to_type;
-+
-+    // NB: Offsets into ctype<char>::_M_table force a particular size
-+    // on the mask type. Because of this, we don't use an enum.
-+    typedef __ctype_mask_t	mask;   
-+    static const mask upper    	= _ISupper;
-+    static const mask lower 	= _ISlower;
-+    static const mask alpha 	= _ISalpha;
-+    static const mask digit 	= _ISdigit;
-+    static const mask xdigit 	= _ISxdigit;
-+    static const mask space 	= _ISspace;
-+    static const mask print 	= _ISprint;
-+    static const mask graph 	= _ISalpha | _ISdigit | _ISpunct;
-+    static const mask cntrl 	= _IScntrl;
-+    static const mask punct 	= _ISpunct;
-+    static const mask alnum 	= _ISalpha | _ISdigit;
-+  };
---- /dev/null
-+++ b/libstdc++-v3/config/os/uclibc/ctype_inline.h
-@@ -0,0 +1,69 @@
-+// Locale support -*- C++ -*-
-+
-+// Copyright (C) 2000, 2002 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.1  Locales
-+//
-+  
-+// ctype bits to be inlined go here. Non-inlinable (ie virtual do_*)
-+// functions go in ctype.cc
-+  
-+  bool
-+  ctype<char>::
-+  is(mask __m, char __c) const
-+  { return _M_table[static_cast<unsigned char>(__c)] & __m; }
-+
-+  const char*
-+  ctype<char>::
-+  is(const char* __low, const char* __high, mask* __vec) const
-+  {
-+    while (__low < __high)
-+      *__vec++ = _M_table[static_cast<unsigned char>(*__low++)];
-+    return __high;
-+  }
-+
-+  const char*
-+  ctype<char>::
-+  scan_is(mask __m, const char* __low, const char* __high) const
-+  {
-+    while (__low < __high 
-+	   && !(_M_table[static_cast<unsigned char>(*__low)] & __m))
-+      ++__low;
-+    return __low;
-+  }
-+
-+  const char*
-+  ctype<char>::
-+  scan_not(mask __m, const char* __low, const char* __high) const
-+  {
-+    while (__low < __high 
-+	   && (_M_table[static_cast<unsigned char>(*__low)] & __m) != 0)
-+      ++__low;
-+    return __low;
-+  }
---- /dev/null
-+++ b/libstdc++-v3/config/os/uclibc/ctype_noninline.h
-@@ -0,0 +1,92 @@
-+// Locale support -*- C++ -*-
-+
-+// Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2004
-+// Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+//
-+// ISO C++ 14882: 22.1  Locales
-+//
-+  
-+// Information as gleaned from /usr/include/ctype.h
-+
-+  const ctype_base::mask*
-+  ctype<char>::classic_table() throw()
-+  { return __C_ctype_b; }
-+
-+  ctype<char>::ctype(__c_locale, const mask* __table, bool __del, 
-+		     size_t __refs) 
-+  : facet(__refs), _M_c_locale_ctype(_S_get_c_locale()), 
-+  _M_del(__table != 0 && __del), _M_widen_ok(0), _M_narrow_ok(0)
-+  {
-+    _M_toupper = __C_ctype_toupper;
-+    _M_tolower = __C_ctype_tolower;
-+    _M_table = __table ? __table : __C_ctype_b;
-+    memset(_M_widen, 0, sizeof(_M_widen));
-+    memset(_M_narrow, 0, sizeof(_M_narrow));
-+  }
-+
-+  ctype<char>::ctype(const mask* __table, bool __del, size_t __refs)
-+  : facet(__refs), _M_c_locale_ctype(_S_get_c_locale()), 
-+  _M_del(__table != 0 && __del), _M_widen_ok(0), _M_narrow_ok(0)
-+  {
-+    _M_toupper = __C_ctype_toupper;
-+    _M_tolower = __C_ctype_tolower;
-+    _M_table = __table ? __table : __C_ctype_b;
-+    memset(_M_widen, 0, sizeof(_M_widen));
-+    memset(_M_narrow, 0, sizeof(_M_narrow));
-+  }
-+
-+  char
-+  ctype<char>::do_toupper(char __c) const
-+  { return _M_toupper[static_cast<unsigned char>(__c)]; }
-+
-+  const char*
-+  ctype<char>::do_toupper(char* __low, const char* __high) const
-+  {
-+    while (__low < __high)
-+      {
-+	*__low = _M_toupper[static_cast<unsigned char>(*__low)];
-+	++__low;
-+      }
-+    return __high;
-+  }
-+
-+  char
-+  ctype<char>::do_tolower(char __c) const
-+  { return _M_tolower[static_cast<unsigned char>(__c)]; }
-+
-+  const char* 
-+  ctype<char>::do_tolower(char* __low, const char* __high) const
-+  {
-+    while (__low < __high)
-+      {
-+	*__low = _M_tolower[static_cast<unsigned char>(*__low)];
-+	++__low;
-+      }
-+    return __high;
-+  }
---- /dev/null
-+++ b/libstdc++-v3/config/os/uclibc/os_defines.h
-@@ -0,0 +1,44 @@
-+// Specific definitions for GNU/Linux  -*- C++ -*-
-+
-+// Copyright (C) 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-+//
-+// This file is part of the GNU ISO C++ Library.  This library is free
-+// software; you can redistribute it and/or modify it under the
-+// terms of the GNU General Public License as published by the
-+// Free Software Foundation; either version 2, or (at your option)
-+// any later version.
-+
-+// This library is distributed in the hope that it will be useful,
-+// but WITHOUT ANY WARRANTY; without even the implied warranty of
-+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+// GNU General Public License for more details.
-+
-+// You should have received a copy of the GNU General Public License along
-+// with this library; see the file COPYING.  If not, write to the Free
-+// Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+// USA.
-+
-+// As a special exception, you may use this file as part of a free software
-+// library without restriction.  Specifically, if other files instantiate
-+// templates or use macros or inline functions from this file, or you compile
-+// this file and link it with other files to produce an executable, this
-+// file does not by itself cause the resulting executable to be covered by
-+// the GNU General Public License.  This exception does not however
-+// invalidate any other reasons why the executable file might be covered by
-+// the GNU General Public License.
-+
-+#ifndef _GLIBCXX_OS_DEFINES
-+#define _GLIBCXX_OS_DEFINES 1
-+
-+// System-specific #define, typedefs, corrections, etc, go here.  This
-+// file will come before all others.
-+
-+// This keeps isanum, et al from being propagated as macros.
-+#define __NO_CTYPE 1
-+
-+#include <features.h>
-+
-+// We must not see the optimized string functions GNU libc defines.
-+#define __NO_STRING_INLINES
-+
-+#endif
---- a/libstdc++-v3/configure
-+++ b/libstdc++-v3/configure
-@@ -4005,6 +4005,11 @@ linux-gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
-+linux-uclibc*)
-+  lt_cv_deplibs_check_method=pass_all
-+  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-+  ;;
-+
- netbsd* | knetbsd*-gnu)
-   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-@@ -5740,7 +5745,7 @@ if test "${enable_clocale+set}" = set; t
-   enableval="$enable_clocale"
- 
-       case "$enableval" in
--       generic|gnu|ieee_1003.1-2001|yes|no|auto) ;;
-+       generic|gnu|ieee_1003.1-2001|uclibc|yes|no|auto) ;;
-        *) { { echo "$as_me:$LINENO: error: Unknown argument to enable/disable clocale" >&5
- echo "$as_me: error: Unknown argument to enable/disable clocale" >&2;}
-    { (exit 1); exit 1; }; } ;;
-@@ -5765,6 +5770,9 @@ fi;
-   # Default to "generic".
-   if test $enable_clocale_flag = auto; then
-     case ${target_os} in
-+      linux-uclibc*)
-+        enable_clocale_flag=uclibc
-+	;;
-       linux* | gnu* | kfreebsd*-gnu | knetbsd*-gnu)
-         cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h.  */
-@@ -5995,6 +6003,76 @@ echo "${ECHO_T}IEEE 1003.1" >&6
-       CTIME_CC=config/locale/generic/time_members.cc
-       CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
-       ;;
-+    uclibc)
-+      echo "$as_me:$LINENO: result: uclibc" >&5
-+echo "${ECHO_T}uclibc" >&6
-+
-+      # Declare intention to use gettext, and add support for specific
-+      # languages.
-+      # For some reason, ALL_LINGUAS has to be before AM-GNU-GETTEXT
-+      ALL_LINGUAS="de fr"
-+
-+      # Don't call AM-GNU-GETTEXT here. Instead, assume glibc.
-+      # Extract the first word of "msgfmt", so it can be a program name with args.
-+set dummy msgfmt; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_check_msgfmt+set}" = set; then
-+  echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+  if test -n "$check_msgfmt"; then
-+  ac_cv_prog_check_msgfmt="$check_msgfmt" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+  IFS=$as_save_IFS
-+  test -z "$as_dir" && as_dir=.
-+  for ac_exec_ext in '' $ac_executable_extensions; do
-+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+    ac_cv_prog_check_msgfmt="yes"
-+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+    break 2
-+  fi
-+done
-+done
-+
-+  test -z "$ac_cv_prog_check_msgfmt" && ac_cv_prog_check_msgfmt="no"
-+fi
-+fi
-+check_msgfmt=$ac_cv_prog_check_msgfmt
-+if test -n "$check_msgfmt"; then
-+  echo "$as_me:$LINENO: result: $check_msgfmt" >&5
-+echo "${ECHO_T}$check_msgfmt" >&6
-+else
-+  echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+      if test x"$check_msgfmt" = x"yes" && test x"$enable_nls" = x"yes"; then
-+        USE_NLS=yes
-+      fi
-+      # Export the build objects.
-+      for ling in $ALL_LINGUAS; do \
-+        glibcxx_MOFILES="$glibcxx_MOFILES $ling.mo"; \
-+        glibcxx_POFILES="$glibcxx_POFILES $ling.po"; \
-+      done
-+
-+
-+
-+      CLOCALE_H=config/locale/uclibc/c_locale.h
-+      CLOCALE_CC=config/locale/uclibc/c_locale.cc
-+      CCODECVT_CC=config/locale/uclibc/codecvt_members.cc
-+      CCOLLATE_CC=config/locale/uclibc/collate_members.cc
-+      CCTYPE_CC=config/locale/uclibc/ctype_members.cc
-+      CMESSAGES_H=config/locale/uclibc/messages_members.h
-+      CMESSAGES_CC=config/locale/uclibc/messages_members.cc
-+      CMONEY_CC=config/locale/uclibc/monetary_members.cc
-+      CNUMERIC_CC=config/locale/uclibc/numeric_members.cc
-+      CTIME_H=config/locale/uclibc/time_members.h
-+      CTIME_CC=config/locale/uclibc/time_members.cc
-+      CLOCALE_INTERNAL_H=config/locale/uclibc/c++locale_internal.h
-+      ;;
-   esac
- 
-   # This is where the testsuite looks for locale catalogs, using the
---- a/libstdc++-v3/configure.host
-+++ b/libstdc++-v3/configure.host
-@@ -270,6 +270,12 @@ case "${host_os}" in
-     ;;
- esac
- 
-+# Override for uClibc since linux-uclibc gets mishandled above.
-+case "${host_os}" in
-+  *-uclibc*)
-+    os_include_dir="os/uclibc"
-+    ;;
-+esac
- 
- # Set any OS-dependent and CPU-dependent bits.
- # THIS TABLE IS SORTED.  KEEP IT THAT WAY.
---- a/libstdc++-v3/crossconfig.m4
-+++ b/libstdc++-v3/crossconfig.m4
-@@ -143,6 +143,99 @@ case "${host}" in
- 	;;
-     esac
-     ;;
-+  *-uclibc*)
-+# Temporary hack until we implement the float versions of the libm funcs
-+    AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h \
-+      machine/endian.h machine/param.h sys/machine.h sys/types.h \
-+      fp.h float.h endian.h inttypes.h locale.h float.h stdint.h])
-+    SECTION_FLAGS='-ffunction-sections -fdata-sections'
-+    AC_SUBST(SECTION_FLAGS)
-+    GLIBCXX_CHECK_LINKER_FEATURES
-+    GLIBCXX_CHECK_COMPLEX_MATH_SUPPORT
-+    GLIBCXX_CHECK_WCHAR_T_SUPPORT
-+
-+    # For LFS.
-+    AC_DEFINE(HAVE_INT64_T)
-+    case "$target" in
-+      *-uclinux*)
-+        # Don't enable LFS with uClinux
-+        ;;
-+      *)
-+        AC_DEFINE(_GLIBCXX_USE_LFS)
-+    esac
-+
-+    # For showmanyc_helper().
-+    AC_CHECK_HEADERS(sys/ioctl.h sys/filio.h)
-+    GLIBCXX_CHECK_POLL
-+    GLIBCXX_CHECK_S_ISREG_OR_S_IFREG
-+
-+    # For xsputn_2().
-+    AC_CHECK_HEADERS(sys/uio.h)
-+    GLIBCXX_CHECK_WRITEV
-+
-+#     AC_DEFINE(HAVE_ACOSF)
-+#     AC_DEFINE(HAVE_ASINF)
-+#     AC_DEFINE(HAVE_ATANF)
-+#     AC_DEFINE(HAVE_ATAN2F)
-+    AC_DEFINE(HAVE_CEILF)
-+    AC_DEFINE(HAVE_COPYSIGN)
-+#     AC_DEFINE(HAVE_COPYSIGNF)
-+#     AC_DEFINE(HAVE_COSF)
-+#     AC_DEFINE(HAVE_COSHF)
-+#     AC_DEFINE(HAVE_EXPF)
-+#     AC_DEFINE(HAVE_FABSF)
-+    AC_DEFINE(HAVE_FINITE)
-+    AC_DEFINE(HAVE_FINITEF)
-+    AC_DEFINE(HAVE_FLOORF)
-+#     AC_DEFINE(HAVE_FMODF)
-+#     AC_DEFINE(HAVE_FREXPF)
-+    AC_DEFINE(HAVE_HYPOT)
-+#     AC_DEFINE(HAVE_HYPOTF)
-+    AC_DEFINE(HAVE_ISINF)
-+    AC_DEFINE(HAVE_ISINFF)
-+    AC_DEFINE(HAVE_ISNAN)
-+    AC_DEFINE(HAVE_ISNANF)
-+#     AC_DEFINE(HAVE_LOGF)
-+#     AC_DEFINE(HAVE_LOG10F)
-+#     AC_DEFINE(HAVE_MODFF)
-+#     AC_DEFINE(HAVE_SINF)
-+#     AC_DEFINE(HAVE_SINHF)
-+#     AC_DEFINE(HAVE_SINCOS)
-+#     AC_DEFINE(HAVE_SINCOSF)
-+    AC_DEFINE(HAVE_SQRTF)
-+#     AC_DEFINE(HAVE_TANF)
-+#     AC_DEFINE(HAVE_TANHF)
-+    if test x"long_double_math_on_this_cpu" = x"yes"; then
-+      AC_MSG_ERROR([long_double_math_on_this_cpu is yes!])
-+#       AC_DEFINE(HAVE_ACOSL)
-+#       AC_DEFINE(HAVE_ASINL)
-+#       AC_DEFINE(HAVE_ATANL)
-+#       AC_DEFINE(HAVE_ATAN2L)
-+#       AC_DEFINE(HAVE_CEILL)
-+#       AC_DEFINE(HAVE_COPYSIGNL)
-+#       AC_DEFINE(HAVE_COSL)
-+#       AC_DEFINE(HAVE_COSHL)
-+#       AC_DEFINE(HAVE_EXPL)
-+#       AC_DEFINE(HAVE_FABSL)
-+#       AC_DEFINE(HAVE_FINITEL)
-+#       AC_DEFINE(HAVE_FLOORL)
-+#       AC_DEFINE(HAVE_FMODL)
-+#       AC_DEFINE(HAVE_FREXPL)
-+#       AC_DEFINE(HAVE_HYPOTL)
-+#       AC_DEFINE(HAVE_ISINFL)
-+#       AC_DEFINE(HAVE_ISNANL)
-+#       AC_DEFINE(HAVE_LOGL)
-+#       AC_DEFINE(HAVE_LOG10L)
-+#       AC_DEFINE(HAVE_MODFL)
-+#       AC_DEFINE(HAVE_POWL)
-+#       AC_DEFINE(HAVE_SINL)
-+#       AC_DEFINE(HAVE_SINHL)
-+#       AC_DEFINE(HAVE_SINCOSL)
-+#       AC_DEFINE(HAVE_SQRTL)
-+#       AC_DEFINE(HAVE_TANL)
-+#       AC_DEFINE(HAVE_TANHL)
-+    fi
-+    ;;
-   *-linux* | *-uclinux* | *-gnu* | *-kfreebsd*-gnu | *-knetbsd*-gnu)
-     AC_CHECK_HEADERS([nan.h ieeefp.h endian.h sys/isa_defs.h \
-       machine/endian.h machine/param.h sys/machine.h sys/types.h \
-@@ -157,7 +250,7 @@ case "${host}" in
-     AC_DEFINE(HAVE_INT64_T)
-     case "$target" in
-       *-uclinux*)
--        # Don't enable LFS with uClibc
-+        # Don't enable LFS with uClinux
-         ;;
-       *)
-         AC_DEFINE(_GLIBCXX_USE_LFS)
---- a/libstdc++-v3/include/c_compatibility/wchar.h
-+++ b/libstdc++-v3/include/c_compatibility/wchar.h
-@@ -101,7 +101,9 @@ using std::wmemcmp;
- using std::wmemcpy;
- using std::wmemmove;
- using std::wmemset;
-+#if _GLIBCXX_HAVE_WCSFTIME
- using std::wcsftime;
-+#endif
- 
- #if _GLIBCXX_USE_C99
- using std::wcstold;
---- a/libstdc++-v3/include/c_std/std_cwchar.h
-+++ b/libstdc++-v3/include/c_std/std_cwchar.h
-@@ -180,7 +180,9 @@ namespace std
-   using ::wcscoll;
-   using ::wcscpy;
-   using ::wcscspn;
-+#if _GLIBCXX_HAVE_WCSFTIME
-   using ::wcsftime;
-+#endif
-   using ::wcslen;
-   using ::wcsncat;
-   using ::wcsncmp;
diff --git a/toolchain/gcc/patches/4.1.2/300-libstdc++-pic.patch b/toolchain/gcc/patches/4.1.2/300-libstdc++-pic.patch
deleted file mode 100644
index f61ec0afb8..0000000000
--- a/toolchain/gcc/patches/4.1.2/300-libstdc++-pic.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-# DP: Build and install libstdc++_pic.a library.
-
---- a/libstdc++-v3/src/Makefile.am
-+++ b/libstdc++-v3/src/Makefile.am
-@@ -234,6 +234,12 @@ CXXLINK = $(LIBTOOL) --tag CXX --mode=li
- 	  $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LDFLAGS) -o $@
- 
- 
-+install-exec-local:
-+ifeq ($(enable_shared),yes)
-+	$(AR) cru libstdc++_pic.a .libs/*.o $(top_builddir)/libsupc++/*.o
-+	$(INSTALL_DATA) libstdc++_pic.a $(DESTDIR)$(toolexeclibdir)
-+endif
-+
- # Added bits to build debug library.
- if GLIBCXX_BUILD_DEBUG
- all-local: build_debug
---- a/libstdc++-v3/src/Makefile.in
-+++ b/libstdc++-v3/src/Makefile.in
-@@ -627,7 +627,7 @@ info-am:
- 
- install-data-am: install-data-local
- 
--install-exec-am: install-toolexeclibLTLIBRARIES
-+install-exec-am: install-toolexeclibLTLIBRARIES install-exec-local
- 
- install-info: install-info-am
- 
-@@ -660,6 +660,7 @@ uninstall-am: uninstall-info-am uninstal
- 	distclean-libtool distclean-tags distdir dvi dvi-am html \
- 	html-am info info-am install install-am install-data \
- 	install-data-am install-data-local install-exec \
-+	install-exec-local \
- 	install-exec-am install-info install-info-am install-man \
- 	install-strip install-toolexeclibLTLIBRARIES installcheck \
- 	installcheck-am installdirs maintainer-clean \
-@@ -760,6 +761,13 @@ build_debug: stamp-debug
- install_debug:
- 	(cd ${debugdir} && $(MAKE) \
- 	toolexeclibdir=$(glibcxx_toolexeclibdir)/debug install)
-+
-+install-exec-local:
-+ifeq ($(enable_shared),yes)
-+	$(AR) cru libstdc++_pic.a *.o $(top_builddir)/libsupc++/*.o
-+	$(INSTALL_DATA) libstdc++_pic.a $(DESTDIR)$(toolexeclibdir)
-+endif
-+
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
- # Otherwise a system limit (for SysV at least) may be exceeded.
- .NOEXPORT:
diff --git a/toolchain/gcc/patches/4.1.2/301-missing-execinfo_h.patch b/toolchain/gcc/patches/4.1.2/301-missing-execinfo_h.patch
deleted file mode 100644
index 35e0244641..0000000000
--- a/toolchain/gcc/patches/4.1.2/301-missing-execinfo_h.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/boehm-gc/include/gc.h
-+++ b/boehm-gc/include/gc.h
-@@ -500,7 +500,7 @@ GC_API GC_PTR GC_malloc_atomic_ignore_of
- #ifdef __linux__
- # include <features.h>
- # if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1 || __GLIBC__ > 2) \
--     && !defined(__ia64__)
-+     && !defined(__ia64__) && !defined(__UCLIBC__)
- #   ifndef GC_HAVE_BUILTIN_BACKTRACE
- #     define GC_HAVE_BUILTIN_BACKTRACE
- #   endif
diff --git a/toolchain/gcc/patches/4.1.2/302-c99-snprintf.patch b/toolchain/gcc/patches/4.1.2/302-c99-snprintf.patch
deleted file mode 100644
index aed7941d56..0000000000
--- a/toolchain/gcc/patches/4.1.2/302-c99-snprintf.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/libstdc++-v3/include/c_std/std_cstdio.h
-+++ b/libstdc++-v3/include/c_std/std_cstdio.h
-@@ -143,7 +143,7 @@ namespace std
-   using ::vsprintf;
- }
- 
--#if _GLIBCXX_USE_C99
-+#if _GLIBCXX_USE_C99 || defined(__UCLIBC__)
- 
- #undef snprintf
- #undef vfscanf
diff --git a/toolchain/gcc/patches/4.1.2/303-c99-complex-ugly-hack.patch b/toolchain/gcc/patches/4.1.2/303-c99-complex-ugly-hack.patch
deleted file mode 100644
index 4654f0c0f5..0000000000
--- a/toolchain/gcc/patches/4.1.2/303-c99-complex-ugly-hack.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/libstdc++-v3/configure
-+++ b/libstdc++-v3/configure
-@@ -7324,6 +7324,9 @@ cat confdefs.h >>conftest.$ac_ext
- cat >>conftest.$ac_ext <<_ACEOF
- /* end confdefs.h.  */
- #include <complex.h>
-+#ifdef __UCLIBC__
-+#error ugly hack to make sure configure test fails here for cross until uClibc supports the complex funcs
-+#endif
- int
- main ()
- {
diff --git a/toolchain/gcc/patches/4.1.2/304-index_macro.patch b/toolchain/gcc/patches/4.1.2/304-index_macro.patch
deleted file mode 100644
index f9e97c10eb..0000000000
--- a/toolchain/gcc/patches/4.1.2/304-index_macro.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/libstdc++-v3/include/ext/rope
-+++ b/libstdc++-v3/include/ext/rope
-@@ -57,6 +57,9 @@
- #include <bits/allocator.h>
- #include <ext/hash_fun.h>
- 
-+/* cope w/ index defined as macro, SuSv3 proposal */
-+#undef index
-+
- # ifdef __GC
- #   define __GC_CONST const
- # else
---- a/libstdc++-v3/include/ext/ropeimpl.h
-+++ b/libstdc++-v3/include/ext/ropeimpl.h
-@@ -53,6 +53,9 @@
- #include <ext/memory> // For uninitialized_copy_n
- #include <ext/numeric> // For power
- 
-+/* cope w/ index defined as macro, SuSv3 proposal */
-+#undef index
-+
- namespace __gnu_cxx
- {
-   using std::size_t;
diff --git a/toolchain/gcc/patches/4.1.2/500-avr32.patch b/toolchain/gcc/patches/4.1.2/500-avr32.patch
deleted file mode 100644
index 40c5f75fab..0000000000
--- a/toolchain/gcc/patches/4.1.2/500-avr32.patch
+++ /dev/null
@@ -1,19545 +0,0 @@
---- a/config.sub
-+++ b/config.sub
-@@ -239,7 +239,7 @@ case $basic_machine in
- 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- 	| am33_2.0 \
--	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
-+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- 	| bfin \
- 	| c4x | clipper \
- 	| d10v | d30v | dlx | dsp16xx \
-@@ -316,7 +316,7 @@ case $basic_machine in
- 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
--	| avr-* \
-+	| avr-* | avr32-* \
- 	| bfin-* | bs2000-* \
- 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- 	| clipper-* | craynv-* | cydra-* \
---- a/configure.in
-+++ b/configure.in
-@@ -497,6 +497,9 @@ case "${target}" in
-   arm-*-riscix*)
-     noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
-     ;;
-+  avr32-*-*)
-+    noconfigdirs="$noconfigdirs target-libiberty target-libmudflap target-libffi ${libgcj}"
-+    ;;
-   avr-*-*)
-     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
-     ;;
---- a/gcc/builtins.c
-+++ b/gcc/builtins.c
-@@ -9228,7 +9228,7 @@ validate_arglist (tree arglist, ...)
- 
-   do
-     {
--      code = va_arg (ap, enum tree_code);
-+      code = va_arg (ap, int);
-       switch (code)
- 	{
- 	case 0:
---- a/gcc/calls.c
-+++ b/gcc/calls.c
-@@ -3434,7 +3434,7 @@ emit_library_call_value_1 (int retval, r
-   for (; count < nargs; count++)
-     {
-       rtx val = va_arg (p, rtx);
--      enum machine_mode mode = va_arg (p, enum machine_mode);
-+      enum machine_mode mode = va_arg (p, int);
- 
-       /* We cannot convert the arg value to the mode the library wants here;
- 	 must do it earlier where we know the signedness of the arg.  */
---- /dev/null
-+++ b/gcc/config/avr32/avr32.c
-@@ -0,0 +1,7273 @@
-+/*
-+   Target hooks and helper functions for AVR32.
-+   Copyright 2003-2006 Atmel Corporation.
-+
-+   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+   Initial porting by Anders �dland.
-+
-+   This file is part of GCC.
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+#include "config.h"
-+#include "system.h"
-+#include "coretypes.h"
-+#include "tm.h"
-+#include "rtl.h"
-+#include "tree.h"
-+#include "obstack.h"
-+#include "regs.h"
-+#include "hard-reg-set.h"
-+#include "real.h"
-+#include "insn-config.h"
-+#include "conditions.h"
-+#include "output.h"
-+#include "insn-attr.h"
-+#include "flags.h"
-+#include "reload.h"
-+#include "function.h"
-+#include "expr.h"
-+#include "optabs.h"
-+#include "toplev.h"
-+#include "recog.h"
-+#include "ggc.h"
-+#include "except.h"
-+#include "c-pragma.h"
-+#include "integrate.h"
-+#include "tm_p.h"
-+#include "langhooks.h"
-+
-+#include "target.h"
-+#include "target-def.h"
-+
-+#include <ctype.h>
-+
-+/* Forward definitions of types.  */
-+typedef struct minipool_node Mnode;
-+typedef struct minipool_fixup Mfix;
-+
-+/* Obstack for minipool constant handling.  */
-+static struct obstack minipool_obstack;
-+static char *minipool_startobj;
-+static rtx minipool_vector_label;
-+
-+/* True if we are currently building a constant table.  */
-+int making_const_table;
-+
-+/* Some forward function declarations */
-+static unsigned long avr32_isr_value (tree);
-+static unsigned long avr32_compute_func_type (void);
-+static tree avr32_handle_isr_attribute (tree *, tree, tree, int, bool *);
-+static tree avr32_handle_acall_attribute (tree *, tree, tree, int, bool *);
-+static tree avr32_handle_fndecl_attribute (tree * node, tree name, tree args,
-+					   int flags, bool * no_add_attrs);
-+static void avr32_reorg (void);
-+bool avr32_return_in_msb (tree type);
-+bool avr32_vector_mode_supported (enum machine_mode mode);
-+static void avr32_init_libfuncs (void);
-+void avr32_load_pic_register (void);
-+
-+
-+static void
-+avr32_add_gc_roots (void)
-+{
-+  gcc_obstack_init (&minipool_obstack);
-+  minipool_startobj = (char *) obstack_alloc (&minipool_obstack, 0);
-+}
-+
-+
-+/* List of all known AVR32 parts  */
-+static const struct part_type_s avr32_part_types[] = {
-+  /* name, part_type, architecture type, macro */
-+  {"none", PART_TYPE_AVR32_NONE, ARCH_TYPE_AVR32_AP, "__AVR32__"},
-+  {"ap7000", PART_TYPE_AVR32_AP7000, ARCH_TYPE_AVR32_AP, "__AVR32_AP7000__"},
-+  {"ap7010", PART_TYPE_AVR32_AP7010, ARCH_TYPE_AVR32_AP, "__AVR32_AP7010__"},
-+  {"ap7020", PART_TYPE_AVR32_AP7020, ARCH_TYPE_AVR32_AP, "__AVR32_AP7020__"},
-+  {"uc3a0256", PART_TYPE_AVR32_UC3A0256, ARCH_TYPE_AVR32_UC, "__AVR32_UC3A0256__"},
-+  {"uc3a0512", PART_TYPE_AVR32_UC3A0512, ARCH_TYPE_AVR32_UC, "__AVR32_UC3A0512__"},
-+  {"uc3a1128", PART_TYPE_AVR32_UC3A1128, ARCH_TYPE_AVR32_UC, "__AVR32_UC3A1128__"},
-+  {"uc3a1256", PART_TYPE_AVR32_UC3A1256, ARCH_TYPE_AVR32_UC, "__AVR32_UC3A1256__"},
-+  {"uc3a1512", PART_TYPE_AVR32_UC3A1512, ARCH_TYPE_AVR32_UC, "__AVR32_UC3A1512__"},
-+  {NULL, 0, 0, NULL}
-+};
-+
-+/* List of all known AVR32 architectures  */
-+static const struct arch_type_s avr32_arch_types[] = {
-+  /* name, architecture type, microarchitecture type, feature flags, macro */
-+  {"ap", ARCH_TYPE_AVR32_AP, UARCH_TYPE_AVR32B, FLAG_AVR32_HAS_DSP |
-+   FLAG_AVR32_HAS_SIMD | FLAG_AVR32_HAS_UNALIGNED_WORD |
-+   FLAG_AVR32_HAS_BRANCH_PRED, "__AVR32_AP__"},
-+  {"uc", ARCH_TYPE_AVR32_UC, UARCH_TYPE_AVR32A,
-+   FLAG_AVR32_HAS_DSP | FLAG_AVR32_HAS_RMW, "__AVR32_UC__"},
-+  {NULL, 0, 0, 0, NULL}
-+};
-+
-+/* Default arch name */
-+const char *avr32_arch_name = "ap";
-+const char *avr32_part_name = "none";
-+
-+const struct part_type_s *avr32_part;
-+const struct arch_type_s *avr32_arch;
-+
-+
-+/* Override command line options */
-+void
-+avr32_override_options (void)
-+{
-+  const struct part_type_s *part;
-+  const struct arch_type_s *arch;
-+
-+  /* Check if part type is set. */
-+  for (part = avr32_part_types; part->name; part++)
-+    if (strcmp (part->name, avr32_part_name) == 0)
-+      break;
-+
-+  avr32_part = part;
-+
-+  if (!part->name)
-+    {
-+      fprintf (stderr, "Unknown part `%s' specified\nKnown part names:\n",
-+	       avr32_part_name);
-+      for (part = avr32_part_types; part->name; part++)
-+	fprintf (stderr, "\t%s\n", part->name);
-+      avr32_part = &avr32_part_types[PART_TYPE_AVR32_NONE];
-+    }
-+
-+  avr32_arch = &avr32_arch_types[avr32_part->arch_type];
-+
-+  /* If part was set to "none" then check if arch was set. */
-+  if (strcmp (avr32_part->name, "none") == 0)
-+    {
-+      /* Check if arch type is set. */
-+      for (arch = avr32_arch_types; arch->name; arch++)
-+	if (strcmp (arch->name, avr32_arch_name) == 0)
-+	  break;
-+
-+      avr32_arch = arch;
-+
-+      if (!arch->name)
-+	{
-+	  fprintf (stderr, "Unknown arch `%s' specified\nKnown arch names:\n",
-+		   avr32_arch_name);
-+	  for (arch = avr32_arch_types; arch->name; arch++)
-+	    fprintf (stderr, "\t%s\n", arch->name);
-+	  avr32_arch = &avr32_arch_types[ARCH_TYPE_AVR32_AP];
-+	}
-+    }
-+
-+  /* If optimization level is two or greater, then align start of loops to a
-+     word boundary since this will allow folding the first insn of the loop.
-+     Do this only for targets supporting branch prediction. */
-+  if (optimize >= 2 && TARGET_BRANCH_PRED)
-+    align_loops = 2;
-+
-+  if (AVR32_ALWAYS_PIC)
-+    flag_pic = 1;
-+
-+  if (TARGET_NO_PIC)
-+    flag_pic = 0;
-+
-+  avr32_add_gc_roots ();
-+}
-+
-+
-+/*
-+If defined, a function that outputs the assembler code for entry to a
-+function.  The prologue is responsible for setting up the stack frame,
-+initializing the frame pointer register, saving registers that must be
-+saved, and allocating size additional bytes of storage for the
-+local variables.  size is an integer.  file is a stdio
-+stream to which the assembler code should be output.
-+
-+The label for the beginning of the function need not be output by this
-+macro.  That has already been done when the macro is run.
-+
-+To determine which registers to save, the macro can refer to the array
-+regs_ever_live: element r is nonzero if hard register
-+r is used anywhere within the function.  This implies the function
-+prologue should save register r, provided it is not one of the
-+call-used registers.  (TARGET_ASM_FUNCTION_EPILOGUE must likewise use
-+regs_ever_live.)
-+
-+On machines that have ``register windows'', the function entry code does
-+not save on the stack the registers that are in the windows, even if
-+they are supposed to be preserved by function calls; instead it takes
-+appropriate steps to ``push'' the register stack, if any non-call-used
-+registers are used in the function.
-+
-+On machines where functions may or may not have frame-pointers, the
-+function entry code must vary accordingly; it must set up the frame
-+pointer if one is wanted, and not otherwise.  To determine whether a
-+frame pointer is in wanted, the macro can refer to the variable
-+frame_pointer_needed.  The variable's value will be 1 at run
-+time in a function that needs a frame pointer.  (see Elimination).
-+
-+The function entry code is responsible for allocating any stack space
-+required for the function.  This stack space consists of the regions
-+listed below.  In most cases, these regions are allocated in the
-+order listed, with the last listed region closest to the top of the
-+stack (the lowest address if STACK_GROWS_DOWNWARD is defined, and
-+the highest address if it is not defined).  You can use a different order
-+for a machine if doing so is more convenient or required for
-+compatibility reasons.  Except in cases where required by standard
-+or by a debugger, there is no reason why the stack layout used by GCC
-+need agree with that used by other compilers for a machine.
-+*/
-+
-+#undef TARGET_ASM_FUNCTION_PROLOGUE
-+#define TARGET_ASM_FUNCTION_PROLOGUE avr32_target_asm_function_prologue
-+
-+
-+#undef TARGET_DEFAULT_SHORT_ENUMS
-+#define TARGET_DEFAULT_SHORT_ENUMS hook_bool_void_false
-+
-+#undef TARGET_PROMOTE_FUNCTION_ARGS
-+#define TARGET_PROMOTE_FUNCTION_ARGS hook_bool_tree_true
-+
-+#undef TARGET_PROMOTE_FUNCTION_RETURN
-+#define TARGET_PROMOTE_FUNCTION_RETURN hook_bool_tree_true
-+
-+#undef TARGET_PROMOTE_PROTOTYPES
-+#define TARGET_PROMOTE_PROTOTYPES hook_bool_tree_true
-+
-+#undef TARGET_MUST_PASS_IN_STACK
-+#define TARGET_MUST_PASS_IN_STACK avr32_must_pass_in_stack
-+
-+#undef TARGET_PASS_BY_REFERENCE
-+#define TARGET_PASS_BY_REFERENCE avr32_pass_by_reference
-+
-+#undef TARGET_STRICT_ARGUMENT_NAMING
-+#define TARGET_STRICT_ARGUMENT_NAMING avr32_strict_argument_naming
-+
-+#undef TARGET_VECTOR_MODE_SUPPORTED_P
-+#define TARGET_VECTOR_MODE_SUPPORTED_P avr32_vector_mode_supported
-+
-+#undef TARGET_RETURN_IN_MEMORY
-+#define TARGET_RETURN_IN_MEMORY avr32_return_in_memory
-+
-+#undef TARGET_RETURN_IN_MSB
-+#define TARGET_RETURN_IN_MSB avr32_return_in_msb
-+
-+#undef TARGET_ARG_PARTIAL_BYTES
-+#define TARGET_ARG_PARTIAL_BYTES avr32_arg_partial_bytes
-+
-+#undef TARGET_STRIP_NAME_ENCODING
-+#define TARGET_STRIP_NAME_ENCODING avr32_strip_name_encoding
-+
-+#define streq(string1, string2) (strcmp (string1, string2) == 0)
-+
-+#undef  TARGET_ATTRIBUTE_TABLE
-+#define TARGET_ATTRIBUTE_TABLE avr32_attribute_table
-+
-+#undef  TARGET_COMP_TYPE_ATTRIBUTES
-+#define TARGET_COMP_TYPE_ATTRIBUTES avr32_comp_type_attributes
-+
-+
-+#undef  TARGET_RTX_COSTS
-+#define TARGET_RTX_COSTS avr32_rtx_costs
-+
-+#undef  TARGET_CANNOT_FORCE_CONST_MEM
-+#define  TARGET_CANNOT_FORCE_CONST_MEM avr32_cannot_force_const_mem
-+
-+#undef  TARGET_ASM_INTEGER
-+#define TARGET_ASM_INTEGER avr32_assemble_integer
-+
-+/*
-+ * Switches to the appropriate section for output of constant pool
-+ * entry x in mode. You can assume that x is some kind of constant in
-+ * RTL. The argument mode is redundant except in the case of a
-+ * const_int rtx. Select the section by calling readonly_data_ section
-+ * or one of the alternatives for other sections. align is the
-+ * constant alignment in bits.
-+ *
-+ * The default version of this function takes care of putting symbolic
-+ * constants in flag_ pic mode in data_section and everything else in
-+ * readonly_data_section.
-+ */
-+#undef TARGET_ASM_SELECT_RTX_SECTION
-+#define TARGET_ASM_SELECT_RTX_SECTION avr32_select_rtx_section
-+
-+
-+/*
-+ * If non-null, this hook performs a target-specific pass over the
-+ * instruction stream. The compiler will run it at all optimization
-+ * levels, just before the point at which it normally does
-+ * delayed-branch scheduling.
-+ *
-+ * The exact purpose of the hook varies from target to target. Some
-+ * use it to do transformations that are necessary for correctness,
-+ * such as laying out in-function constant pools or avoiding hardware
-+ * hazards. Others use it as an opportunity to do some
-+ * machine-dependent optimizations.
-+ *
-+ * You need not implement the hook if it has nothing to do. The
-+ * default definition is null.
-+ */
-+#undef TARGET_MACHINE_DEPENDENT_REORG
-+#define TARGET_MACHINE_DEPENDENT_REORG avr32_reorg
-+
-+/* Target hook for assembling integer objects.
-+   Need to handle integer vectors */
-+static bool
-+avr32_assemble_integer (rtx x, unsigned int size, int aligned_p)
-+{
-+  if (avr32_vector_mode_supported (GET_MODE (x)))
-+    {
-+      int i, units;
-+
-+      if (GET_CODE (x) != CONST_VECTOR)
-+	abort ();
-+
-+      units = CONST_VECTOR_NUNITS (x);
-+
-+      switch (GET_MODE (x))
-+	{
-+	case V2HImode:
-+	  size = 2;
-+	  break;
-+	case V4QImode:
-+	  size = 1;
-+	  break;
-+	default:
-+	  abort ();
-+	}
-+
-+      for (i = 0; i < units; i++)
-+	{
-+	  rtx elt;
-+
-+	  elt = CONST_VECTOR_ELT (x, i);
-+	  assemble_integer (elt, size, i == 0 ? 32 : size * BITS_PER_UNIT, 1);
-+	}
-+
-+      return true;
-+    }
-+
-+  return default_assemble_integer (x, size, aligned_p);
-+}
-+
-+/*
-+ * This target hook describes the relative costs of RTL expressions.
-+ *
-+ * The cost may depend on the precise form of the expression, which is
-+ * available for examination in x, and the rtx code of the expression
-+ * in which it is contained, found in outer_code. code is the
-+ * expression code--redundant, since it can be obtained with GET_CODE
-+ * (x).
-+ *
-+ * In implementing this hook, you can use the construct COSTS_N_INSNS
-+ * (n) to specify a cost equal to n fast instructions.
-+ *
-+ * On entry to the hook, *total contains a default estimate for the
-+ * cost of the expression. The hook should modify this value as
-+ * necessary. Traditionally, the default costs are COSTS_N_INSNS (5)
-+ * for multiplications, COSTS_N_INSNS (7) for division and modulus
-+ * operations, and COSTS_N_INSNS (1) for all other operations.
-+ *
-+ * When optimizing for code size, i.e. when optimize_size is non-zero,
-+ * this target hook should be used to estimate the relative size cost
-+ * of an expression, again relative to COSTS_N_INSNS.
-+ *
-+ * The hook returns true when all subexpressions of x have been
-+ * processed, and false when rtx_cost should recurse.
-+ */
-+
-+/* Worker routine for avr32_rtx_costs.  */
-+static inline int
-+avr32_rtx_costs_1 (rtx x, enum rtx_code code ATTRIBUTE_UNUSED,
-+		   enum rtx_code outer ATTRIBUTE_UNUSED)
-+{
-+  enum machine_mode mode = GET_MODE (x);
-+
-+  switch (GET_CODE (x))
-+    {
-+    case MEM:
-+      /* Using pre decrement / post increment memory operations on the
-+         avr32_uc architecture means that two writebacks must be performed
-+         and hence two cycles are needed. */
-+      if (!optimize_size
-+	  && GET_MODE_SIZE (mode) <= 2 * UNITS_PER_WORD
-+	  && avr32_arch->arch_type == ARCH_TYPE_AVR32_UC
-+	  && (GET_CODE (XEXP (x, 0)) == PRE_DEC
-+	      || GET_CODE (XEXP (x, 0)) == POST_INC))
-+	return COSTS_N_INSNS (4);
-+
-+      /* Memory costs quite a lot for the first word, but subsequent words
-+         load at the equivalent of a single insn each.  */
-+      if (GET_MODE_SIZE (mode) > UNITS_PER_WORD)
-+	return COSTS_N_INSNS (2 + (GET_MODE_SIZE (mode) / UNITS_PER_WORD));
-+
-+      return COSTS_N_INSNS (3);
-+    case SYMBOL_REF:
-+    case CONST:
-+      /* These are valid for the pseudo insns: lda.w and call which operates
-+         on direct addresses. We assume that the cost of a lda.w is the same
-+         as the cost of a ld.w insn. */
-+      return (outer == SET) ? COSTS_N_INSNS (3) : COSTS_N_INSNS (1);
-+    case DIV:
-+    case MOD:
-+    case UDIV:
-+    case UMOD:
-+      return optimize_size ? COSTS_N_INSNS (1) : COSTS_N_INSNS (16);
-+
-+    case ROTATE:
-+    case ROTATERT:
-+      if (mode == TImode)
-+	return COSTS_N_INSNS (100);
-+
-+      if (mode == DImode)
-+	return COSTS_N_INSNS (10);
-+      return COSTS_N_INSNS (4);
-+    case ASHIFT:
-+    case LSHIFTRT:
-+    case ASHIFTRT:
-+    case NOT:
-+      if (mode == TImode)
-+	return COSTS_N_INSNS (10);
-+
-+      if (mode == DImode)
-+	return COSTS_N_INSNS (4);
-+      return COSTS_N_INSNS (1);
-+    case PLUS:
-+    case MINUS:
-+    case NEG:
-+    case COMPARE:
-+    case ABS:
-+      if (GET_MODE_CLASS (mode) == MODE_FLOAT)
-+	return COSTS_N_INSNS (100);
-+
-+      if (mode == TImode)
-+	return COSTS_N_INSNS (50);
-+
-+      if (mode == DImode)
-+	return COSTS_N_INSNS (2);
-+      return COSTS_N_INSNS (1);
-+
-+    case MULT:
-+      {
-+	if (GET_MODE_CLASS (mode) == MODE_FLOAT)
-+	  return COSTS_N_INSNS (300);
-+
-+	if (mode == TImode)
-+	  return COSTS_N_INSNS (16);
-+
-+	if (mode == DImode)
-+	  return COSTS_N_INSNS (4);
-+
-+	if (mode == HImode)
-+	  return COSTS_N_INSNS (2);
-+
-+	return COSTS_N_INSNS (3);
-+      }
-+    case IF_THEN_ELSE:
-+      if (GET_CODE (XEXP (x, 1)) == PC || GET_CODE (XEXP (x, 2)) == PC)
-+	return COSTS_N_INSNS (4);
-+      return COSTS_N_INSNS (1);
-+    case SIGN_EXTEND:
-+    case ZERO_EXTEND:
-+      /* Sign/Zero extensions of registers cost quite much since these
-+         instrcutions only take one register operand which means that gcc
-+         often must insert some move instrcutions */
-+      if (mode == QImode || mode == HImode)
-+	return (COSTS_N_INSNS (GET_CODE (XEXP (x, 0)) == MEM ? 0 : 1));
-+      return COSTS_N_INSNS (4);
-+    case UNSPEC:
-+      /* divmod operations */
-+      if (XINT (x, 1) == UNSPEC_UDIVMODSI4_INTERNAL
-+	  || XINT (x, 1) == UNSPEC_DIVMODSI4_INTERNAL)
-+	{
-+	  return optimize_size ? COSTS_N_INSNS (1) : COSTS_N_INSNS (16);
-+	}
-+      /* Fallthrough */
-+    default:
-+      return COSTS_N_INSNS (1);
-+    }
-+}
-+
-+static bool
-+avr32_rtx_costs (rtx x, int code, int outer_code, int *total)
-+{
-+  *total = avr32_rtx_costs_1 (x, code, outer_code);
-+  return true;
-+}
-+
-+
-+bool
-+avr32_cannot_force_const_mem (rtx x ATTRIBUTE_UNUSED)
-+{
-+  /* Do not want symbols in the constant pool when compiling pic or if using
-+     address pseudo instructions. */
-+  return ((flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS)
-+	  && avr32_find_symbol (x) != NULL_RTX);
-+}
-+
-+
-+/* Table of machine attributes.  */
-+const struct attribute_spec avr32_attribute_table[] = {
-+  /* { name, min_len, max_len, decl_req, type_req, fn_type_req, handler } */
-+  /* Interrupt Service Routines have special prologue and epilogue
-+     requirements.  */
-+  {"isr", 0, 1, false, false, false, avr32_handle_isr_attribute},
-+  {"interrupt", 0, 1, false, false, false, avr32_handle_isr_attribute},
-+  {"acall", 0, 1, false, true, true, avr32_handle_acall_attribute},
-+  {"naked", 0, 0, true, false, false, avr32_handle_fndecl_attribute},
-+  {NULL, 0, 0, false, false, false, NULL}
-+};
-+
-+
-+typedef struct
-+{
-+  const char *const arg;
-+  const unsigned long return_value;
-+}
-+isr_attribute_arg;
-+
-+static const isr_attribute_arg isr_attribute_args[] = {
-+  {"FULL", AVR32_FT_ISR_FULL},
-+  {"full", AVR32_FT_ISR_FULL},
-+  {"HALF", AVR32_FT_ISR_HALF},
-+  {"half", AVR32_FT_ISR_HALF},
-+  {"NONE", AVR32_FT_ISR_NONE},
-+  {"none", AVR32_FT_ISR_NONE},
-+  {"UNDEF", AVR32_FT_ISR_NONE},
-+  {"undef", AVR32_FT_ISR_NONE},
-+  {"SWI", AVR32_FT_ISR_NONE},
-+  {"swi", AVR32_FT_ISR_NONE},
-+  {NULL, AVR32_FT_ISR_NONE}
-+};
-+
-+/* Returns the (interrupt) function type of the current
-+   function, or AVR32_FT_UNKNOWN if the type cannot be determined.  */
-+
-+static unsigned long
-+avr32_isr_value (tree argument)
-+{
-+  const isr_attribute_arg *ptr;
-+  const char *arg;
-+
-+  /* No argument - default to ISR_NONE.  */
-+  if (argument == NULL_TREE)
-+    return AVR32_FT_ISR_NONE;
-+
-+  /* Get the value of the argument.  */
-+  if (TREE_VALUE (argument) == NULL_TREE
-+      || TREE_CODE (TREE_VALUE (argument)) != STRING_CST)
-+    return AVR32_FT_UNKNOWN;
-+
-+  arg = TREE_STRING_POINTER (TREE_VALUE (argument));
-+
-+  /* Check it against the list of known arguments.  */
-+  for (ptr = isr_attribute_args; ptr->arg != NULL; ptr++)
-+    if (streq (arg, ptr->arg))
-+      return ptr->return_value;
-+
-+  /* An unrecognized interrupt type.  */
-+  return AVR32_FT_UNKNOWN;
-+}
-+
-+
-+
-+/*
-+These hooks specify assembly directives for creating certain kinds
-+of integer object.  The TARGET_ASM_BYTE_OP directive creates a
-+byte-sized object, the TARGET_ASM_ALIGNED_HI_OP one creates an
-+aligned two-byte object, and so on.  Any of the hooks may be
-+NULL, indicating that no suitable directive is available.
-+
-+The compiler will print these strings at the start of a new line,
-+followed immediately by the object's initial value.  In most cases,
-+the string should contain a tab, a pseudo-op, and then another tab.
-+*/
-+#undef  TARGET_ASM_BYTE_OP
-+#define TARGET_ASM_BYTE_OP "\t.byte\t"
-+#undef  TARGET_ASM_ALIGNED_HI_OP
-+#define TARGET_ASM_ALIGNED_HI_OP "\t.align 1\n\t.short\t"
-+#undef  TARGET_ASM_ALIGNED_SI_OP
-+#define TARGET_ASM_ALIGNED_SI_OP "\t.align 2\n\t.int\t"
-+#undef  TARGET_ASM_ALIGNED_DI_OP
-+#define TARGET_ASM_ALIGNED_DI_OP NULL
-+#undef  TARGET_ASM_ALIGNED_TI_OP
-+#define TARGET_ASM_ALIGNED_TI_OP NULL
-+#undef  TARGET_ASM_UNALIGNED_HI_OP
-+#define TARGET_ASM_UNALIGNED_HI_OP "\t.short\t"
-+#undef  TARGET_ASM_UNALIGNED_SI_OP
-+#define TARGET_ASM_UNALIGNED_SI_OP "\t.int\t"
-+#undef  TARGET_ASM_UNALIGNED_DI_OP
-+#define TARGET_ASM_UNALIGNED_DI_OP NULL
-+#undef  TARGET_ASM_UNALIGNED_TI_OP
-+#define TARGET_ASM_UNALIGNED_TI_OP NULL
-+
-+#undef TARGET_SCHED_USE_DFA_PIPELINE_INTERFACE
-+#define TARGET_SCHED_USE_DFA_PIPELINE_INTERFACE avr32_sched_use_dfa_pipeline_interface
-+
-+#undef TARGET_ASM_OUTPUT_MI_THUNK
-+#define TARGET_ASM_OUTPUT_MI_THUNK avr32_output_mi_thunk
-+
-+
-+static void
-+avr32_output_mi_thunk (FILE * file,
-+		       tree thunk ATTRIBUTE_UNUSED,
-+		       HOST_WIDE_INT delta,
-+		       HOST_WIDE_INT vcall_offset, tree function)
-+{
-+  int mi_delta = delta;
-+  int this_regno =
-+    (avr32_return_in_memory (DECL_RESULT (function), TREE_TYPE (function)) ?
-+     INTERNAL_REGNUM (11) : INTERNAL_REGNUM (12));
-+
-+
-+  if (!avr32_const_ok_for_constraint_p (mi_delta, 'I', "Is21")
-+      || vcall_offset)
-+    {
-+      fprintf (file, "\tpushm\tr10\n");
-+    }
-+
-+
-+  if (mi_delta != 0)
-+    {
-+      if (avr32_const_ok_for_constraint_p (mi_delta, 'I', "Is21"))
-+	{
-+	  fprintf (file, "\tsub\t%s, -0x%x\n", reg_names[this_regno],
-+		   mi_delta);
-+	}
-+      else
-+	{
-+	  /* Immediate is larger than k21 we must make us a temp register by
-+	     pushing a register to the stack. */
-+	  fprintf (file, "\tmov\tr10, lo(%x)\n", mi_delta);
-+	  fprintf (file, "\torh\tr10, hi(%x)\n", mi_delta);
-+	  fprintf (file, "\tadd\t%s, r10\n", reg_names[this_regno]);
-+	}
-+    }
-+
-+
-+  if (vcall_offset != 0)
-+    {
-+      fprintf (file, "\tld.w\tr10, %s[0]\n", reg_names[this_regno]);
-+      fprintf (file, "\tld.w\tr10, r10[%i]\n", (int) vcall_offset);
-+      fprintf (file, "\tadd\t%s, r10\n", reg_names[this_regno]);
-+    }
-+
-+
-+  if (!avr32_const_ok_for_constraint_p (mi_delta, 'I', "Is21")
-+      || vcall_offset)
-+    {
-+      fprintf (file, "\tpopm\tr10\n");
-+    }
-+
-+  if (flag_pic)
-+    {
-+      /* Don't know how we should do this!!! For now we'll just use an
-+         extended branch instruction and hope that the function will be
-+         reached. */
-+      fprintf (file, "\tbral\t");
-+      assemble_name (file, XSTR (XEXP (DECL_RTL (function), 0), 0));
-+      fputc ('\n', file);
-+    }
-+  else
-+    {
-+      fprintf (file, "\tlddpc\tpc, 0f\n");
-+      fprintf (file, "\t.align 2\n");
-+      fputs ("0:\t.long\t", file);
-+      assemble_name (file, XSTR (XEXP (DECL_RTL (function), 0), 0));
-+      fputc ('\n', file);
-+    }
-+}
-+
-+/* Implements target hook vector_mode_supported.  */
-+bool
-+avr32_vector_mode_supported (enum machine_mode mode)
-+{
-+  if ((mode == V2HImode) || (mode == V4QImode))
-+    return true;
-+
-+  return false;
-+}
-+
-+
-+#undef TARGET_INIT_LIBFUNCS
-+#define TARGET_INIT_LIBFUNCS avr32_init_libfuncs
-+
-+#undef  TARGET_INIT_BUILTINS
-+#define TARGET_INIT_BUILTINS avr32_init_builtins
-+
-+#undef  TARGET_EXPAND_BUILTIN
-+#define TARGET_EXPAND_BUILTIN avr32_expand_builtin
-+
-+tree int_ftype_int, int_ftype_void, short_ftype_short, void_ftype_int_int,
-+  void_ftype_ptr_int;
-+tree void_ftype_int, void_ftype_void, int_ftype_ptr_int;
-+tree short_ftype_short, int_ftype_int_short, int_ftype_short_short,
-+  short_ftype_short_short;
-+tree int_ftype_int_int, longlong_ftype_int_short, longlong_ftype_short_short;
-+tree void_ftype_int_int_int_int_int, void_ftype_int_int_int;
-+tree longlong_ftype_int_int, void_ftype_int_int_longlong;
-+tree int_ftype_int_int_int, longlong_ftype_longlong_int_short;
-+tree longlong_ftype_longlong_short_short, int_ftype_int_short_short;
-+
-+#define def_builtin(NAME, TYPE, CODE)					\
-+  lang_hooks.builtin_function ((NAME), (TYPE), (CODE),			\
-+		  	       BUILT_IN_MD, NULL, NULL_TREE)
-+
-+#define def_mbuiltin(MASK, NAME, TYPE, CODE)				\
-+  do									\
-+    {									\
-+      if ((MASK))							\
-+	lang_hooks.builtin_function ((NAME), (TYPE), (CODE),		\
-+				     BUILT_IN_MD, NULL, NULL_TREE);	\
-+    }									\
-+  while (0)
-+
-+struct builtin_description
-+{
-+  const unsigned int mask;
-+  const enum insn_code icode;
-+  const char *const name;
-+  const int code;
-+  const enum rtx_code comparison;
-+  const unsigned int flag;
-+  const tree *ftype;
-+};
-+
-+static const struct builtin_description bdesc_2arg[] = {
-+#define DSP_BUILTIN(code, builtin, ftype) \
-+  { 1, CODE_FOR_##code, "__builtin_" #code , \
-+    AVR32_BUILTIN_##builtin, 0, 0, ftype }
-+
-+  DSP_BUILTIN (mulsathh_h, MULSATHH_H, &short_ftype_short_short),
-+  DSP_BUILTIN (mulsathh_w, MULSATHH_W, &int_ftype_short_short),
-+  DSP_BUILTIN (mulsatrndhh_h, MULSATRNDHH_H, &short_ftype_short_short),
-+  DSP_BUILTIN (mulsatrndwh_w, MULSATRNDWH_W, &int_ftype_int_short),
-+  DSP_BUILTIN (mulsatwh_w, MULSATWH_W, &int_ftype_int_short),
-+  DSP_BUILTIN (satadd_h, SATADD_H, &short_ftype_short_short),
-+  DSP_BUILTIN (satsub_h, SATSUB_H, &short_ftype_short_short),
-+  DSP_BUILTIN (satadd_w, SATADD_W, &int_ftype_int_int),
-+  DSP_BUILTIN (satsub_w, SATSUB_W, &int_ftype_int_int),
-+  DSP_BUILTIN (mulwh_d, MULWH_D, &longlong_ftype_int_short),
-+  DSP_BUILTIN (mulnwh_d, MULNWH_D, &longlong_ftype_int_short)
-+};
-+
-+
-+void
-+avr32_init_builtins (void)
-+{
-+  unsigned int i;
-+  const struct builtin_description *d;
-+  tree endlink = void_list_node;
-+  tree int_endlink = tree_cons (NULL_TREE, integer_type_node, endlink);
-+  tree longlong_endlink =
-+    tree_cons (NULL_TREE, long_long_integer_type_node, endlink);
-+  tree short_endlink =
-+    tree_cons (NULL_TREE, short_integer_type_node, endlink);
-+  tree void_endlink = tree_cons (NULL_TREE, void_type_node, endlink);
-+
-+  /* int func (int) */
-+  int_ftype_int = build_function_type (integer_type_node, int_endlink);
-+
-+  /* short func (short) */
-+  short_ftype_short
-+    = build_function_type (short_integer_type_node, short_endlink);
-+
-+  /* short func (short, short) */
-+  short_ftype_short_short
-+    = build_function_type (short_integer_type_node,
-+			   tree_cons (NULL_TREE, short_integer_type_node,
-+				      short_endlink));
-+
-+  /* long long func (long long, short, short) */
-+  longlong_ftype_longlong_short_short
-+    = build_function_type (long_long_integer_type_node,
-+			   tree_cons (NULL_TREE, long_long_integer_type_node,
-+				      tree_cons (NULL_TREE,
-+						 short_integer_type_node,
-+						 short_endlink)));
-+
-+  /* long long func (short, short) */
-+  longlong_ftype_short_short
-+    = build_function_type (long_long_integer_type_node,
-+			   tree_cons (NULL_TREE, short_integer_type_node,
-+				      short_endlink));
-+
-+  /* int func (int, int) */
-+  int_ftype_int_int
-+    = build_function_type (integer_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      int_endlink));
-+
-+  /* long long func (int, int) */
-+  longlong_ftype_int_int
-+    = build_function_type (long_long_integer_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      int_endlink));
-+
-+  /* long long int func (long long, int, short) */
-+  longlong_ftype_longlong_int_short
-+    = build_function_type (long_long_integer_type_node,
-+			   tree_cons (NULL_TREE, long_long_integer_type_node,
-+				      tree_cons (NULL_TREE, integer_type_node,
-+						 short_endlink)));
-+
-+  /* long long int func (int, short) */
-+  longlong_ftype_int_short
-+    = build_function_type (long_long_integer_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      short_endlink));
-+
-+  /* int func (int, short, short) */
-+  int_ftype_int_short_short
-+    = build_function_type (integer_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      tree_cons (NULL_TREE,
-+						 short_integer_type_node,
-+						 short_endlink)));
-+
-+  /* int func (short, short) */
-+  int_ftype_short_short
-+    = build_function_type (integer_type_node,
-+			   tree_cons (NULL_TREE, short_integer_type_node,
-+				      short_endlink));
-+
-+  /* int func (int, short) */
-+  int_ftype_int_short
-+    = build_function_type (integer_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      short_endlink));
-+
-+  /* void func (int, int) */
-+  void_ftype_int_int
-+    = build_function_type (void_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      int_endlink));
-+
-+  /* void func (int, int, int) */
-+  void_ftype_int_int_int
-+    = build_function_type (void_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      tree_cons (NULL_TREE, integer_type_node,
-+						 int_endlink)));
-+
-+  /* void func (int, int, long long) */
-+  void_ftype_int_int_longlong
-+    = build_function_type (void_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      tree_cons (NULL_TREE, integer_type_node,
-+						 longlong_endlink)));
-+
-+  /* void func (int, int, int, int, int) */
-+  void_ftype_int_int_int_int_int
-+    = build_function_type (void_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      tree_cons (NULL_TREE, integer_type_node,
-+						 tree_cons (NULL_TREE,
-+							    integer_type_node,
-+							    tree_cons
-+							    (NULL_TREE,
-+							     integer_type_node,
-+							     int_endlink)))));
-+
-+  /* void func (void *, int) */
-+  void_ftype_ptr_int
-+    = build_function_type (void_type_node,
-+			   tree_cons (NULL_TREE, ptr_type_node, int_endlink));
-+
-+  /* void func (int) */
-+  void_ftype_int = build_function_type (void_type_node, int_endlink);
-+
-+  /* void func (void) */
-+  void_ftype_void = build_function_type (void_type_node, void_endlink);
-+
-+  /* int func (void) */
-+  int_ftype_void = build_function_type (integer_type_node, void_endlink);
-+
-+  /* int func (void *, int) */
-+  int_ftype_ptr_int
-+    = build_function_type (integer_type_node,
-+			   tree_cons (NULL_TREE, ptr_type_node, int_endlink));
-+
-+  /* int func (int, int, int) */
-+  int_ftype_int_int_int
-+    = build_function_type (integer_type_node,
-+			   tree_cons (NULL_TREE, integer_type_node,
-+				      tree_cons (NULL_TREE, integer_type_node,
-+						 int_endlink)));
-+
-+  /* Initialize avr32 builtins.  */
-+  def_builtin ("__builtin_mfsr", int_ftype_int, AVR32_BUILTIN_MFSR);
-+  def_builtin ("__builtin_mtsr", void_ftype_int_int, AVR32_BUILTIN_MTSR);
-+  def_builtin ("__builtin_mfdr", int_ftype_int, AVR32_BUILTIN_MFDR);
-+  def_builtin ("__builtin_mtdr", void_ftype_int_int, AVR32_BUILTIN_MTDR);
-+  def_builtin ("__builtin_cache", void_ftype_ptr_int, AVR32_BUILTIN_CACHE);
-+  def_builtin ("__builtin_sync", void_ftype_int, AVR32_BUILTIN_SYNC);
-+  def_builtin ("__builtin_tlbr", void_ftype_void, AVR32_BUILTIN_TLBR);
-+  def_builtin ("__builtin_tlbs", void_ftype_void, AVR32_BUILTIN_TLBS);
-+  def_builtin ("__builtin_tlbw", void_ftype_void, AVR32_BUILTIN_TLBW);
-+  def_builtin ("__builtin_breakpoint", void_ftype_void,
-+	       AVR32_BUILTIN_BREAKPOINT);
-+  def_builtin ("__builtin_xchg", int_ftype_ptr_int, AVR32_BUILTIN_XCHG);
-+  def_builtin ("__builtin_ldxi", int_ftype_ptr_int, AVR32_BUILTIN_LDXI);
-+  def_builtin ("__builtin_bswap_16", short_ftype_short,
-+	       AVR32_BUILTIN_BSWAP16);
-+  def_builtin ("__builtin_bswap_32", int_ftype_int, AVR32_BUILTIN_BSWAP32);
-+  def_builtin ("__builtin_cop", void_ftype_int_int_int_int_int,
-+	       AVR32_BUILTIN_COP);
-+  def_builtin ("__builtin_mvcr_w", int_ftype_int_int, AVR32_BUILTIN_MVCR_W);
-+  def_builtin ("__builtin_mvrc_w", void_ftype_int_int_int,
-+	       AVR32_BUILTIN_MVRC_W);
-+  def_builtin ("__builtin_mvcr_d", longlong_ftype_int_int,
-+	       AVR32_BUILTIN_MVCR_D);
-+  def_builtin ("__builtin_mvrc_d", void_ftype_int_int_longlong,
-+	       AVR32_BUILTIN_MVRC_D);
-+  def_builtin ("__builtin_sats", int_ftype_int_int_int, AVR32_BUILTIN_SATS);
-+  def_builtin ("__builtin_satu", int_ftype_int_int_int, AVR32_BUILTIN_SATU);
-+  def_builtin ("__builtin_satrnds", int_ftype_int_int_int,
-+	       AVR32_BUILTIN_SATRNDS);
-+  def_builtin ("__builtin_satrndu", int_ftype_int_int_int,
-+	       AVR32_BUILTIN_SATRNDU);
-+  def_builtin ("__builtin_musfr", void_ftype_int, AVR32_BUILTIN_MUSFR);
-+  def_builtin ("__builtin_mustr", int_ftype_void, AVR32_BUILTIN_MUSTR);
-+  def_builtin ("__builtin_macsathh_w", int_ftype_int_short_short,
-+	       AVR32_BUILTIN_MACSATHH_W);
-+  def_builtin ("__builtin_macwh_d", longlong_ftype_longlong_int_short,
-+	       AVR32_BUILTIN_MACWH_D);
-+  def_builtin ("__builtin_machh_d", longlong_ftype_longlong_short_short,
-+	       AVR32_BUILTIN_MACHH_D);
-+
-+  /* Add all builtins that are more or less simple operations on two
-+     operands.  */
-+  for (i = 0, d = bdesc_2arg; i < ARRAY_SIZE (bdesc_2arg); i++, d++)
-+    {
-+      /* Use one of the operands; the target can have a different mode for
-+         mask-generating compares.  */
-+
-+      if (d->name == 0)
-+	continue;
-+
-+      def_mbuiltin (d->mask, d->name, *(d->ftype), d->code);
-+    }
-+}
-+
-+
-+/* Subroutine of avr32_expand_builtin to take care of binop insns.  */
-+
-+static rtx
-+avr32_expand_binop_builtin (enum insn_code icode, tree arglist, rtx target)
-+{
-+  rtx pat;
-+  tree arg0 = TREE_VALUE (arglist);
-+  tree arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+  rtx op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+  rtx op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+  enum machine_mode tmode = insn_data[icode].operand[0].mode;
-+  enum machine_mode mode0 = insn_data[icode].operand[1].mode;
-+  enum machine_mode mode1 = insn_data[icode].operand[2].mode;
-+
-+  if (!target
-+      || GET_MODE (target) != tmode
-+      || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+    target = gen_reg_rtx (tmode);
-+
-+  /* In case the insn wants input operands in modes different from the
-+     result, abort.  */
-+  if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+    {
-+      /* If op0 is already a reg we must cast it to the correct mode. */
-+      if (REG_P (op0))
-+	op0 = convert_to_mode (mode0, op0, 1);
-+      else
-+	op0 = copy_to_mode_reg (mode0, op0);
-+    }
-+  if (!(*insn_data[icode].operand[2].predicate) (op1, mode1))
-+    {
-+      /* If op1 is already a reg we must cast it to the correct mode. */
-+      if (REG_P (op1))
-+	op1 = convert_to_mode (mode1, op1, 1);
-+      else
-+	op1 = copy_to_mode_reg (mode1, op1);
-+    }
-+  pat = GEN_FCN (icode) (target, op0, op1);
-+  if (!pat)
-+    return 0;
-+  emit_insn (pat);
-+  return target;
-+}
-+
-+/* Expand an expression EXP that calls a built-in function,
-+   with result going to TARGET if that's convenient
-+   (and in mode MODE if that's convenient).
-+   SUBTARGET may be used as the target for computing one of EXP's operands.
-+   IGNORE is nonzero if the value is to be ignored.  */
-+
-+rtx
-+avr32_expand_builtin (tree exp,
-+		      rtx target,
-+		      rtx subtarget ATTRIBUTE_UNUSED,
-+		      enum machine_mode mode ATTRIBUTE_UNUSED,
-+		      int ignore ATTRIBUTE_UNUSED)
-+{
-+  const struct builtin_description *d;
-+  unsigned int i;
-+  enum insn_code icode;
-+  tree fndecl = TREE_OPERAND (TREE_OPERAND (exp, 0), 0);
-+  tree arglist = TREE_OPERAND (exp, 1);
-+  tree arg0, arg1, arg2;
-+  rtx op0, op1, op2, pat;
-+  enum machine_mode tmode, mode0, mode1;
-+  enum machine_mode arg0_mode;
-+  int fcode = DECL_FUNCTION_CODE (fndecl);
-+
-+  switch (fcode)
-+    {
-+    default:
-+      break;
-+
-+    case AVR32_BUILTIN_SATS:
-+    case AVR32_BUILTIN_SATU:
-+    case AVR32_BUILTIN_SATRNDS:
-+    case AVR32_BUILTIN_SATRNDU:
-+      {
-+	const char *fname;
-+	switch (fcode)
-+	  {
-+	  default:
-+	  case AVR32_BUILTIN_SATS:
-+	    icode = CODE_FOR_sats;
-+	    fname = "sats";
-+	    break;
-+	  case AVR32_BUILTIN_SATU:
-+	    icode = CODE_FOR_satu;
-+	    fname = "satu";
-+	    break;
-+	  case AVR32_BUILTIN_SATRNDS:
-+	    icode = CODE_FOR_satrnds;
-+	    fname = "satrnds";
-+	    break;
-+	  case AVR32_BUILTIN_SATRNDU:
-+	    icode = CODE_FOR_satrndu;
-+	    fname = "satrndu";
-+	    break;
-+	  }
-+
-+	arg0 = TREE_VALUE (arglist);
-+	arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+	arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+	op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+	op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+	op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+
-+	tmode = insn_data[icode].operand[0].mode;
-+
-+
-+	if (target == 0
-+	    || GET_MODE (target) != tmode
-+	    || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	  target = gen_reg_rtx (tmode);
-+
-+
-+	if (!(*insn_data[icode].operand[0].predicate) (op0, GET_MODE (op0)))
-+	  {
-+	    op0 = copy_to_mode_reg (insn_data[icode].operand[0].mode, op0);
-+	  }
-+
-+	if (!(*insn_data[icode].operand[1].predicate) (op1, SImode))
-+	  {
-+	    error ("Parameter 2 to __builtin_%s should be a constant number.",
-+		   fname);
-+	    return NULL_RTX;
-+	  }
-+
-+	if (!(*insn_data[icode].operand[1].predicate) (op2, SImode))
-+	  {
-+	    error ("Parameter 3 to __builtin_%s should be a constant number.",
-+		   fname);
-+	    return NULL_RTX;
-+	  }
-+
-+	emit_move_insn (target, op0);
-+	pat = GEN_FCN (icode) (target, op1, op2);
-+	if (!pat)
-+	  return 0;
-+	emit_insn (pat);
-+
-+	return target;
-+      }
-+    case AVR32_BUILTIN_MUSTR:
-+      icode = CODE_FOR_mustr;
-+      tmode = insn_data[icode].operand[0].mode;
-+
-+      if (target == 0
-+	  || GET_MODE (target) != tmode
-+	  || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	target = gen_reg_rtx (tmode);
-+      pat = GEN_FCN (icode) (target);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return target;
-+
-+    case AVR32_BUILTIN_MFSR:
-+      icode = CODE_FOR_mfsr;
-+      arg0 = TREE_VALUE (arglist);
-+      op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+      tmode = insn_data[icode].operand[0].mode;
-+      mode0 = insn_data[icode].operand[1].mode;
-+
-+      if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+	{
-+	  error ("Parameter 1 to __builtin_mfsr must be a constant number");
-+	}
-+
-+      if (target == 0
-+	  || GET_MODE (target) != tmode
-+	  || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	target = gen_reg_rtx (tmode);
-+      pat = GEN_FCN (icode) (target, op0);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return target;
-+    case AVR32_BUILTIN_MTSR:
-+      icode = CODE_FOR_mtsr;
-+      arg0 = TREE_VALUE (arglist);
-+      arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+      op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+      op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+      mode0 = insn_data[icode].operand[0].mode;
-+      mode1 = insn_data[icode].operand[1].mode;
-+
-+      if (!(*insn_data[icode].operand[0].predicate) (op0, mode0))
-+	{
-+	  error ("Parameter 1 to __builtin_mtsr must be a constant number");
-+	  return gen_reg_rtx (mode0);
-+	}
-+      if (!(*insn_data[icode].operand[1].predicate) (op1, mode1))
-+	op1 = copy_to_mode_reg (mode1, op1);
-+      pat = GEN_FCN (icode) (op0, op1);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return NULL_RTX;
-+    case AVR32_BUILTIN_MFDR:
-+      icode = CODE_FOR_mfdr;
-+      arg0 = TREE_VALUE (arglist);
-+      op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+      tmode = insn_data[icode].operand[0].mode;
-+      mode0 = insn_data[icode].operand[1].mode;
-+
-+      if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+	{
-+	  error ("Parameter 1 to __builtin_mfdr must be a constant number");
-+	}
-+
-+      if (target == 0
-+	  || GET_MODE (target) != tmode
-+	  || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	target = gen_reg_rtx (tmode);
-+      pat = GEN_FCN (icode) (target, op0);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return target;
-+    case AVR32_BUILTIN_MTDR:
-+      icode = CODE_FOR_mtdr;
-+      arg0 = TREE_VALUE (arglist);
-+      arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+      op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+      op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+      mode0 = insn_data[icode].operand[0].mode;
-+      mode1 = insn_data[icode].operand[1].mode;
-+
-+      if (!(*insn_data[icode].operand[0].predicate) (op0, mode0))
-+	{
-+	  error ("Parameter 1 to __builtin_mtdr must be a constant number");
-+	  return gen_reg_rtx (mode0);
-+	}
-+      if (!(*insn_data[icode].operand[1].predicate) (op1, mode1))
-+	op1 = copy_to_mode_reg (mode1, op1);
-+      pat = GEN_FCN (icode) (op0, op1);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return NULL_RTX;
-+    case AVR32_BUILTIN_CACHE:
-+      icode = CODE_FOR_cache;
-+      arg0 = TREE_VALUE (arglist);
-+      arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+      op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+      op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+      mode0 = insn_data[icode].operand[0].mode;
-+      mode1 = insn_data[icode].operand[1].mode;
-+
-+      if (!(*insn_data[icode].operand[1].predicate) (op1, mode1))
-+	{
-+	  error ("Parameter 2 to __builtin_cache must be a constant number");
-+	  return gen_reg_rtx (mode1);
-+	}
-+
-+      if (!(*insn_data[icode].operand[0].predicate) (op0, mode0))
-+	op0 = copy_to_mode_reg (mode0, op0);
-+
-+      pat = GEN_FCN (icode) (op0, op1);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return NULL_RTX;
-+    case AVR32_BUILTIN_SYNC:
-+    case AVR32_BUILTIN_MUSFR:
-+      {
-+	const char *fname;
-+	switch (fcode)
-+	  {
-+	  default:
-+	  case AVR32_BUILTIN_SYNC:
-+	    icode = CODE_FOR_sync;
-+	    fname = "sync";
-+	    break;
-+	  case AVR32_BUILTIN_MUSFR:
-+	    icode = CODE_FOR_musfr;
-+	    fname = "musfr";
-+	    break;
-+	  }
-+
-+	arg0 = TREE_VALUE (arglist);
-+	op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+	mode0 = insn_data[icode].operand[0].mode;
-+
-+	if (!(*insn_data[icode].operand[0].predicate) (op0, mode0))
-+	  {
-+	    if (icode == CODE_FOR_musfr)
-+	      op0 = copy_to_mode_reg (mode0, op0);
-+	    else
-+	      {
-+		error ("Parameter to __builtin_%s is illegal.", fname);
-+		return gen_reg_rtx (mode0);
-+	      }
-+	  }
-+	pat = GEN_FCN (icode) (op0);
-+	if (!pat)
-+	  return 0;
-+	emit_insn (pat);
-+	return NULL_RTX;
-+      }
-+    case AVR32_BUILTIN_TLBR:
-+      icode = CODE_FOR_tlbr;
-+      pat = GEN_FCN (icode) (NULL_RTX);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return NULL_RTX;
-+    case AVR32_BUILTIN_TLBS:
-+      icode = CODE_FOR_tlbs;
-+      pat = GEN_FCN (icode) (NULL_RTX);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return NULL_RTX;
-+    case AVR32_BUILTIN_TLBW:
-+      icode = CODE_FOR_tlbw;
-+      pat = GEN_FCN (icode) (NULL_RTX);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return NULL_RTX;
-+    case AVR32_BUILTIN_BREAKPOINT:
-+      icode = CODE_FOR_breakpoint;
-+      pat = GEN_FCN (icode) (NULL_RTX);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return NULL_RTX;
-+    case AVR32_BUILTIN_XCHG:
-+      icode = CODE_FOR_xchg;
-+      arg0 = TREE_VALUE (arglist);
-+      arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+      op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+      op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+      tmode = insn_data[icode].operand[0].mode;
-+      mode0 = insn_data[icode].operand[1].mode;
-+      mode1 = insn_data[icode].operand[3].mode;
-+
-+      if (!(*insn_data[icode].operand[3].predicate) (op1, mode1))
-+	{
-+	  op1 = copy_to_mode_reg (mode1, op1);
-+	}
-+
-+      if (!(*insn_data[icode].operand[2].predicate) (op0, mode0))
-+	{
-+	  op0 = copy_to_mode_reg (mode0, op0);
-+	}
-+
-+      if (target == 0
-+	  || GET_MODE (target) != tmode
-+	  || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	target = gen_reg_rtx (tmode);
-+      pat = GEN_FCN (icode) (target, op0, op0, op1);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return target;
-+    case AVR32_BUILTIN_LDXI:
-+      icode = CODE_FOR_ldxi;
-+      arg0 = TREE_VALUE (arglist);
-+      arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+      arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+      op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+      op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+      op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+      tmode = insn_data[icode].operand[0].mode;
-+      mode0 = insn_data[icode].operand[1].mode;
-+      mode1 = insn_data[icode].operand[2].mode;
-+
-+      if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+	{
-+	  op0 = copy_to_mode_reg (mode0, op0);
-+	}
-+
-+      if (!(*insn_data[icode].operand[2].predicate) (op1, mode1))
-+	{
-+	  op1 = copy_to_mode_reg (mode1, op1);
-+	}
-+
-+      if (!(*insn_data[icode].operand[3].predicate) (op2, SImode))
-+	{
-+	  error
-+	    ("Parameter 3 to __builtin_ldxi must be a valid extract shift operand: (0|8|16|24)");
-+	  return gen_reg_rtx (mode0);
-+	}
-+
-+      if (target == 0
-+	  || GET_MODE (target) != tmode
-+	  || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	target = gen_reg_rtx (tmode);
-+      pat = GEN_FCN (icode) (target, op0, op1, op2);
-+      if (!pat)
-+	return 0;
-+      emit_insn (pat);
-+      return target;
-+    case AVR32_BUILTIN_BSWAP16:
-+      {
-+	icode = CODE_FOR_bswap_16;
-+	arg0 = TREE_VALUE (arglist);
-+	arg0_mode = TYPE_MODE (TREE_TYPE (arg0));
-+	mode0 = insn_data[icode].operand[1].mode;
-+	if (arg0_mode != mode0)
-+	  arg0 = build1 (NOP_EXPR,
-+			 (*lang_hooks.types.type_for_mode) (mode0, 0), arg0);
-+
-+	op0 = expand_expr (arg0, NULL_RTX, HImode, 0);
-+	tmode = insn_data[icode].operand[0].mode;
-+
-+
-+	if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+	  {
-+	    op0 = copy_to_mode_reg (mode0, op0);
-+	  }
-+
-+	if (target == 0
-+	    || GET_MODE (target) != tmode
-+	    || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	  {
-+	    target = gen_reg_rtx (tmode);
-+	  }
-+
-+
-+	pat = GEN_FCN (icode) (target, op0);
-+	if (!pat)
-+	  return 0;
-+	emit_insn (pat);
-+
-+	return target;
-+      }
-+    case AVR32_BUILTIN_BSWAP32:
-+      {
-+	icode = CODE_FOR_bswap_32;
-+	arg0 = TREE_VALUE (arglist);
-+	op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+	tmode = insn_data[icode].operand[0].mode;
-+	mode0 = insn_data[icode].operand[1].mode;
-+
-+	if (!(*insn_data[icode].operand[1].predicate) (op0, mode0))
-+	  {
-+	    op0 = copy_to_mode_reg (mode0, op0);
-+	  }
-+
-+	if (target == 0
-+	    || GET_MODE (target) != tmode
-+	    || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	  target = gen_reg_rtx (tmode);
-+
-+
-+	pat = GEN_FCN (icode) (target, op0);
-+	if (!pat)
-+	  return 0;
-+	emit_insn (pat);
-+
-+	return target;
-+      }
-+    case AVR32_BUILTIN_MVCR_W:
-+    case AVR32_BUILTIN_MVCR_D:
-+      {
-+	arg0 = TREE_VALUE (arglist);
-+	arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+	op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+	op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+
-+	if (fcode == AVR32_BUILTIN_MVCR_W)
-+	  icode = CODE_FOR_mvcrsi;
-+	else
-+	  icode = CODE_FOR_mvcrdi;
-+
-+	tmode = insn_data[icode].operand[0].mode;
-+
-+	if (target == 0
-+	    || GET_MODE (target) != tmode
-+	    || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	  target = gen_reg_rtx (tmode);
-+
-+	if (!(*insn_data[icode].operand[1].predicate) (op0, SImode))
-+	  {
-+	    error
-+	      ("Parameter 1 to __builtin_cop is not a valid coprocessor number.");
-+	    error ("Number should be between 0 and 7.");
-+	    return NULL_RTX;
-+	  }
-+
-+	if (!(*insn_data[icode].operand[2].predicate) (op1, SImode))
-+	  {
-+	    error
-+	      ("Parameter 2 to __builtin_cop is not a valid coprocessor register number.");
-+	    error ("Number should be between 0 and 15.");
-+	    return NULL_RTX;
-+	  }
-+
-+	pat = GEN_FCN (icode) (target, op0, op1);
-+	if (!pat)
-+	  return 0;
-+	emit_insn (pat);
-+
-+	return target;
-+      }
-+    case AVR32_BUILTIN_MACSATHH_W:
-+    case AVR32_BUILTIN_MACWH_D:
-+    case AVR32_BUILTIN_MACHH_D:
-+      {
-+	arg0 = TREE_VALUE (arglist);
-+	arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+	arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+	op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+	op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+	op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+
-+	icode = ((fcode == AVR32_BUILTIN_MACSATHH_W) ? CODE_FOR_macsathh_w :
-+		 (fcode == AVR32_BUILTIN_MACWH_D) ? CODE_FOR_macwh_d :
-+		 CODE_FOR_machh_d);
-+
-+	tmode = insn_data[icode].operand[0].mode;
-+	mode0 = insn_data[icode].operand[1].mode;
-+	mode1 = insn_data[icode].operand[2].mode;
-+
-+
-+	if (!target
-+	    || GET_MODE (target) != tmode
-+	    || !(*insn_data[icode].operand[0].predicate) (target, tmode))
-+	  target = gen_reg_rtx (tmode);
-+
-+	if (!(*insn_data[icode].operand[0].predicate) (op0, tmode))
-+	  {
-+	    /* If op0 is already a reg we must cast it to the correct mode. */
-+	    if (REG_P (op0))
-+	      op0 = convert_to_mode (tmode, op0, 1);
-+	    else
-+	      op0 = copy_to_mode_reg (tmode, op0);
-+	  }
-+
-+	if (!(*insn_data[icode].operand[1].predicate) (op1, mode0))
-+	  {
-+	    /* If op1 is already a reg we must cast it to the correct mode. */
-+	    if (REG_P (op1))
-+	      op1 = convert_to_mode (mode0, op1, 1);
-+	    else
-+	      op1 = copy_to_mode_reg (mode0, op1);
-+	  }
-+
-+	if (!(*insn_data[icode].operand[2].predicate) (op2, mode1))
-+	  {
-+	    /* If op1 is already a reg we must cast it to the correct mode. */
-+	    if (REG_P (op2))
-+	      op2 = convert_to_mode (mode1, op2, 1);
-+	    else
-+	      op2 = copy_to_mode_reg (mode1, op2);
-+	  }
-+
-+	emit_move_insn (target, op0);
-+
-+	pat = GEN_FCN (icode) (target, op1, op2);
-+	if (!pat)
-+	  return 0;
-+	emit_insn (pat);
-+	return target;
-+      }
-+    case AVR32_BUILTIN_MVRC_W:
-+    case AVR32_BUILTIN_MVRC_D:
-+      {
-+	arg0 = TREE_VALUE (arglist);
-+	arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+	arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+	op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+	op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+	op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+
-+	if (fcode == AVR32_BUILTIN_MVRC_W)
-+	  icode = CODE_FOR_mvrcsi;
-+	else
-+	  icode = CODE_FOR_mvrcdi;
-+
-+	if (!(*insn_data[icode].operand[0].predicate) (op0, SImode))
-+	  {
-+	    error ("Parameter 1 is not a valid coprocessor number.");
-+	    error ("Number should be between 0 and 7.");
-+	    return NULL_RTX;
-+	  }
-+
-+	if (!(*insn_data[icode].operand[1].predicate) (op1, SImode))
-+	  {
-+	    error ("Parameter 2 is not a valid coprocessor register number.");
-+	    error ("Number should be between 0 and 15.");
-+	    return NULL_RTX;
-+	  }
-+
-+	if (GET_CODE (op2) == CONST_INT
-+	    || GET_CODE (op2) == CONST
-+	    || GET_CODE (op2) == SYMBOL_REF || GET_CODE (op2) == LABEL_REF)
-+	  {
-+	    op2 = force_const_mem (insn_data[icode].operand[2].mode, op2);
-+	  }
-+
-+	if (!(*insn_data[icode].operand[2].predicate) (op2, GET_MODE (op2)))
-+	  op2 = copy_to_mode_reg (insn_data[icode].operand[2].mode, op2);
-+
-+
-+	pat = GEN_FCN (icode) (op0, op1, op2);
-+	if (!pat)
-+	  return 0;
-+	emit_insn (pat);
-+
-+	return NULL_RTX;
-+      }
-+    case AVR32_BUILTIN_COP:
-+      {
-+	rtx op3, op4;
-+	tree arg3, arg4;
-+	icode = CODE_FOR_cop;
-+	arg0 = TREE_VALUE (arglist);
-+	arg1 = TREE_VALUE (TREE_CHAIN (arglist));
-+	arg2 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (arglist)));
-+	arg3 = TREE_VALUE (TREE_CHAIN (TREE_CHAIN (TREE_CHAIN (arglist))));
-+	arg4 =
-+	  TREE_VALUE (TREE_CHAIN
-+		      (TREE_CHAIN (TREE_CHAIN (TREE_CHAIN (arglist)))));
-+	op0 = expand_expr (arg0, NULL_RTX, VOIDmode, 0);
-+	op1 = expand_expr (arg1, NULL_RTX, VOIDmode, 0);
-+	op2 = expand_expr (arg2, NULL_RTX, VOIDmode, 0);
-+	op3 = expand_expr (arg3, NULL_RTX, VOIDmode, 0);
-+	op4 = expand_expr (arg4, NULL_RTX, VOIDmode, 0);
-+
-+	if (!(*insn_data[icode].operand[0].predicate) (op0, SImode))
-+	  {
-+	    error
-+	      ("Parameter 1 to __builtin_cop is not a valid coprocessor number.");
-+	    error ("Number should be between 0 and 7.");
-+	    return NULL_RTX;
-+	  }
-+
-+	if (!(*insn_data[icode].operand[1].predicate) (op1, SImode))
-+	  {
-+	    error
-+	      ("Parameter 2 to __builtin_cop is not a valid coprocessor register number.");
-+	    error ("Number should be between 0 and 15.");
-+	    return NULL_RTX;
-+	  }
-+
-+	if (!(*insn_data[icode].operand[2].predicate) (op2, SImode))
-+	  {
-+	    error
-+	      ("Parameter 3 to __builtin_cop is not a valid coprocessor register number.");
-+	    error ("Number should be between 0 and 15.");
-+	    return NULL_RTX;
-+	  }
-+
-+	if (!(*insn_data[icode].operand[3].predicate) (op3, SImode))
-+	  {
-+	    error
-+	      ("Parameter 4 to __builtin_cop is not a valid coprocessor register number.");
-+	    error ("Number should be between 0 and 15.");
-+	    return NULL_RTX;
-+	  }
-+
-+	if (!(*insn_data[icode].operand[4].predicate) (op4, SImode))
-+	  {
-+	    error
-+	      ("Parameter 5 to __builtin_cop is not a valid coprocessor operation.");
-+	    error ("Number should be between 0 and 127.");
-+	    return NULL_RTX;
-+	  }
-+
-+	pat = GEN_FCN (icode) (op0, op1, op2, op3, op4);
-+	if (!pat)
-+	  return 0;
-+	emit_insn (pat);
-+
-+	return target;
-+      }
-+    }
-+
-+  for (i = 0, d = bdesc_2arg; i < ARRAY_SIZE (bdesc_2arg); i++, d++)
-+    if (d->code == fcode)
-+      return avr32_expand_binop_builtin (d->icode, arglist, target);
-+
-+
-+  /* @@@ Should really do something sensible here.  */
-+  return NULL_RTX;
-+}
-+
-+
-+/* Handle an "interrupt" or "isr" attribute;
-+   arguments as in struct attribute_spec.handler.  */
-+
-+static tree
-+avr32_handle_isr_attribute (tree * node, tree name, tree args,
-+			    int flags, bool * no_add_attrs)
-+{
-+  if (DECL_P (*node))
-+    {
-+      if (TREE_CODE (*node) != FUNCTION_DECL)
-+	{
-+	  warning ("`%s' attribute only applies to functions",
-+		   IDENTIFIER_POINTER (name));
-+	  *no_add_attrs = true;
-+	}
-+      /* FIXME: the argument if any is checked for type attributes; should it
-+         be checked for decl ones? */
-+    }
-+  else
-+    {
-+      if (TREE_CODE (*node) == FUNCTION_TYPE
-+	  || TREE_CODE (*node) == METHOD_TYPE)
-+	{
-+	  if (avr32_isr_value (args) == AVR32_FT_UNKNOWN)
-+	    {
-+	      warning ("`%s' attribute ignored", IDENTIFIER_POINTER (name));
-+	      *no_add_attrs = true;
-+	    }
-+	}
-+      else if (TREE_CODE (*node) == POINTER_TYPE
-+	       && (TREE_CODE (TREE_TYPE (*node)) == FUNCTION_TYPE
-+		   || TREE_CODE (TREE_TYPE (*node)) == METHOD_TYPE)
-+	       && avr32_isr_value (args) != AVR32_FT_UNKNOWN)
-+	{
-+	  *node = build_variant_type_copy (*node);
-+	  TREE_TYPE (*node) = build_type_attribute_variant
-+	    (TREE_TYPE (*node),
-+	     tree_cons (name, args, TYPE_ATTRIBUTES (TREE_TYPE (*node))));
-+	  *no_add_attrs = true;
-+	}
-+      else
-+	{
-+	  /* Possibly pass this attribute on from the type to a decl.  */
-+	  if (flags & ((int) ATTR_FLAG_DECL_NEXT
-+		       | (int) ATTR_FLAG_FUNCTION_NEXT
-+		       | (int) ATTR_FLAG_ARRAY_NEXT))
-+	    {
-+	      *no_add_attrs = true;
-+	      return tree_cons (name, args, NULL_TREE);
-+	    }
-+	  else
-+	    {
-+	      warning ("`%s' attribute ignored", IDENTIFIER_POINTER (name));
-+	    }
-+	}
-+    }
-+
-+  return NULL_TREE;
-+}
-+
-+/* Handle an attribute requiring a FUNCTION_DECL;
-+   arguments as in struct attribute_spec.handler.  */
-+static tree
-+avr32_handle_fndecl_attribute (tree * node, tree name,
-+			       tree args ATTRIBUTE_UNUSED,
-+			       int flags ATTRIBUTE_UNUSED,
-+			       bool * no_add_attrs)
-+{
-+  if (TREE_CODE (*node) != FUNCTION_DECL)
-+    {
-+      warning ("%qs attribute only applies to functions",
-+	       IDENTIFIER_POINTER (name));
-+      *no_add_attrs = true;
-+    }
-+
-+  return NULL_TREE;
-+}
-+
-+
-+/* Handle an acall attribute;
-+   arguments as in struct attribute_spec.handler.  */
-+
-+static tree
-+avr32_handle_acall_attribute (tree * node, tree name,
-+			      tree args ATTRIBUTE_UNUSED,
-+			      int flags ATTRIBUTE_UNUSED, bool * no_add_attrs)
-+{
-+  if (TREE_CODE (*node) == FUNCTION_TYPE || TREE_CODE (*node) == METHOD_TYPE)
-+    {
-+      warning ("`%s' attribute not yet supported...",
-+	       IDENTIFIER_POINTER (name));
-+      *no_add_attrs = true;
-+      return NULL_TREE;
-+    }
-+
-+  warning ("`%s' attribute only applies to functions",
-+	   IDENTIFIER_POINTER (name));
-+  *no_add_attrs = true;
-+  return NULL_TREE;
-+}
-+
-+
-+/* Return 0 if the attributes for two types are incompatible, 1 if they
-+   are compatible, and 2 if they are nearly compatible (which causes a
-+   warning to be generated).  */
-+
-+static int
-+avr32_comp_type_attributes (tree type1, tree type2)
-+{
-+  int acall1, acall2, isr1, isr2, naked1, naked2;
-+
-+  /* Check for mismatch of non-default calling convention.  */
-+  if (TREE_CODE (type1) != FUNCTION_TYPE)
-+    return 1;
-+
-+  /* Check for mismatched call attributes.  */
-+  acall1 = lookup_attribute ("acall", TYPE_ATTRIBUTES (type1)) != NULL;
-+  acall2 = lookup_attribute ("acall", TYPE_ATTRIBUTES (type2)) != NULL;
-+  naked1 = lookup_attribute ("naked", TYPE_ATTRIBUTES (type1)) != NULL;
-+  naked2 = lookup_attribute ("naked", TYPE_ATTRIBUTES (type2)) != NULL;
-+  isr1 = lookup_attribute ("isr", TYPE_ATTRIBUTES (type1)) != NULL;
-+  if (!isr1)
-+    isr1 = lookup_attribute ("interrupt", TYPE_ATTRIBUTES (type1)) != NULL;
-+
-+  isr2 = lookup_attribute ("isr", TYPE_ATTRIBUTES (type2)) != NULL;
-+  if (!isr2)
-+    isr2 = lookup_attribute ("interrupt", TYPE_ATTRIBUTES (type2)) != NULL;
-+
-+  if ((acall1 && isr2)
-+      || (acall2 && isr1) || (naked1 && isr2) || (naked2 && isr1))
-+    return 0;
-+
-+  return 1;
-+}
-+
-+
-+/* Computes the type of the current function.  */
-+
-+static unsigned long
-+avr32_compute_func_type (void)
-+{
-+  unsigned long type = AVR32_FT_UNKNOWN;
-+  tree a;
-+  tree attr;
-+
-+  if (TREE_CODE (current_function_decl) != FUNCTION_DECL)
-+    abort ();
-+
-+  /* Decide if the current function is volatile.  Such functions never
-+     return, and many memory cycles can be saved by not storing register
-+     values that will never be needed again.  This optimization was added to
-+     speed up context switching in a kernel application.  */
-+  if (optimize > 0
-+      && TREE_NOTHROW (current_function_decl)
-+      && TREE_THIS_VOLATILE (current_function_decl))
-+    type |= AVR32_FT_VOLATILE;
-+
-+  if (cfun->static_chain_decl != NULL)
-+    type |= AVR32_FT_NESTED;
-+
-+  attr = DECL_ATTRIBUTES (current_function_decl);
-+
-+  a = lookup_attribute ("isr", attr);
-+  if (a == NULL_TREE)
-+    a = lookup_attribute ("interrupt", attr);
-+
-+  if (a == NULL_TREE)
-+    type |= AVR32_FT_NORMAL;
-+  else
-+    type |= avr32_isr_value (TREE_VALUE (a));
-+
-+
-+  a = lookup_attribute ("acall", attr);
-+  if (a != NULL_TREE)
-+    type |= AVR32_FT_ACALL;
-+
-+  a = lookup_attribute ("naked", attr);
-+  if (a != NULL_TREE)
-+    type |= AVR32_FT_NAKED;
-+
-+  return type;
-+}
-+
-+/* Returns the type of the current function.  */
-+
-+static unsigned long
-+avr32_current_func_type (void)
-+{
-+  if (AVR32_FUNC_TYPE (cfun->machine->func_type) == AVR32_FT_UNKNOWN)
-+    cfun->machine->func_type = avr32_compute_func_type ();
-+
-+  return cfun->machine->func_type;
-+}
-+
-+/*
-+   This target hook should return true if we should not pass type solely
-+   in registers. The file expr.h defines a definition that is usually appropriate,
-+   refer to expr.h for additional documentation.
-+*/
-+bool
-+avr32_must_pass_in_stack (enum machine_mode mode ATTRIBUTE_UNUSED, tree type)
-+{
-+  if (type && AGGREGATE_TYPE_P (type)
-+      /* If the alignment is less than the size then pass in the struct on
-+         the stack. */
-+      && ((unsigned int) TYPE_ALIGN_UNIT (type) <
-+	  (unsigned int) int_size_in_bytes (type))
-+      /* If we support unaligned word accesses then structs of size 4 and 8
-+         can have any alignment and still be passed in registers. */
-+      && !(TARGET_UNALIGNED_WORD
-+	   && (int_size_in_bytes (type) == 4
-+	       || int_size_in_bytes (type) == 8))
-+      /* Double word structs need only a word alignment. */
-+      && !(int_size_in_bytes (type) == 8 && TYPE_ALIGN_UNIT (type) >= 4))
-+    return true;
-+
-+  if (type && AGGREGATE_TYPE_P (type)
-+      /* Structs of size 3,5,6,7 are always passed in registers. */
-+      && (int_size_in_bytes (type) == 3
-+	  || int_size_in_bytes (type) == 5
-+	  || int_size_in_bytes (type) == 6 || int_size_in_bytes (type) == 7))
-+    return true;
-+
-+
-+  return (type && TREE_ADDRESSABLE (type));
-+}
-+
-+
-+bool
-+avr32_strict_argument_naming (CUMULATIVE_ARGS * ca ATTRIBUTE_UNUSED)
-+{
-+  return true;
-+}
-+
-+/*
-+   This target hook should return true if an argument at the position indicated
-+   by cum should be passed by reference. This predicate is queried after target
-+   independent reasons for being passed by reference, such as TREE_ADDRESSABLE (type).
-+
-+   If the hook returns true, a copy of that argument is made in memory and a
-+   pointer to the argument is passed instead of the argument itself. The pointer
-+   is passed in whatever way is appropriate for passing a pointer to that type.
-+*/
-+bool
-+avr32_pass_by_reference (CUMULATIVE_ARGS * cum ATTRIBUTE_UNUSED,
-+			 enum machine_mode mode ATTRIBUTE_UNUSED,
-+			 tree type, bool named ATTRIBUTE_UNUSED)
-+{
-+  return (type && (TREE_CODE (TYPE_SIZE (type)) != INTEGER_CST));
-+}
-+
-+static int
-+avr32_arg_partial_bytes (CUMULATIVE_ARGS * pcum ATTRIBUTE_UNUSED,
-+			 enum machine_mode mode ATTRIBUTE_UNUSED,
-+			 tree type ATTRIBUTE_UNUSED,
-+			 bool named ATTRIBUTE_UNUSED)
-+{
-+  return 0;
-+}
-+
-+
-+struct gcc_target targetm = TARGET_INITIALIZER;
-+
-+/*
-+  Table used to convert from register number in the assembler instructions and
-+  the register numbers used in gcc.
-+*/
-+const int avr32_function_arg_reglist[] =
-+{
-+  INTERNAL_REGNUM (12),
-+  INTERNAL_REGNUM (11),
-+  INTERNAL_REGNUM (10),
-+  INTERNAL_REGNUM (9),
-+  INTERNAL_REGNUM (8)
-+};
-+
-+rtx avr32_compare_op0 = NULL_RTX;
-+rtx avr32_compare_op1 = NULL_RTX;
-+rtx avr32_compare_operator = NULL_RTX;
-+rtx avr32_acc_cache = NULL_RTX;
-+
-+/*
-+  Returns nonzero if it is allowed to store a value of mode mode in hard
-+  register number regno.
-+*/
-+int
-+avr32_hard_regno_mode_ok (int regnr, enum machine_mode mode)
-+{
-+  /* We allow only float modes in the fp-registers */
-+  if (regnr >= FIRST_FP_REGNUM
-+      && regnr <= LAST_FP_REGNUM && GET_MODE_CLASS (mode) != MODE_FLOAT)
-+    {
-+      return 0;
-+    }
-+
-+  switch (mode)
-+    {
-+    case DImode:		/* long long */
-+    case DFmode:		/* double */
-+    case SCmode:		/* __complex__ float */
-+    case CSImode:		/* __complex__ int */
-+      if (regnr < 4)
-+	{			/* long long int not supported in r12, sp, lr
-+				   or pc. */
-+	  return 0;
-+	}
-+      else
-+	{
-+	  if (regnr % 2)	/* long long int has to be refered in even
-+				   registers. */
-+	    return 0;
-+	  else
-+	    return 1;
-+	}
-+    case CDImode:		/* __complex__ long long */
-+    case DCmode:		/* __complex__ double */
-+    case TImode:		/* 16 bytes */
-+      if (regnr < 7)
-+	return 0;
-+      else if (regnr % 2)
-+	return 0;
-+      else
-+	return 1;
-+    default:
-+      return 1;
-+    }
-+}
-+
-+
-+int
-+avr32_rnd_operands (rtx add, rtx shift)
-+{
-+  if (GET_CODE (shift) == CONST_INT &&
-+      GET_CODE (add) == CONST_INT && INTVAL (shift) > 0)
-+    {
-+      if ((1 << (INTVAL (shift) - 1)) == INTVAL (add))
-+	return TRUE;
-+    }
-+
-+  return FALSE;
-+}
-+
-+
-+
-+int
-+avr32_const_ok_for_constraint_p (HOST_WIDE_INT value, char c, const char *str)
-+{
-+  switch (c)
-+    {
-+    case 'K':
-+    case 'I':
-+      {
-+	HOST_WIDE_INT min_value = 0, max_value = 0;
-+	char size_str[3];
-+	int const_size;
-+
-+	size_str[0] = str[2];
-+	size_str[1] = str[3];
-+	size_str[2] = '\0';
-+	const_size = atoi (size_str);
-+
-+	if (toupper (str[1]) == 'U')
-+	  {
-+	    min_value = 0;
-+	    max_value = (1 << const_size) - 1;
-+	  }
-+	else if (toupper (str[1]) == 'S')
-+	  {
-+	    min_value = -(1 << (const_size - 1));
-+	    max_value = (1 << (const_size - 1)) - 1;
-+	  }
-+
-+	if (c == 'I')
-+	  {
-+	    value = -value;
-+	  }
-+
-+	if (value >= min_value && value <= max_value)
-+	  {
-+	    return 1;
-+	  }
-+	break;
-+      }
-+    case 'M':
-+      return avr32_mask_upper_bits_operand (GEN_INT (value), VOIDmode);
-+    }
-+
-+  return 0;
-+}
-+
-+
-+/*Compute mask of which floating-point registers needs saving upon
-+  entry to this function*/
-+static unsigned long
-+avr32_compute_save_fp_reg_mask (void)
-+{
-+  unsigned long func_type = avr32_current_func_type ();
-+  unsigned int save_reg_mask = 0;
-+  unsigned int reg;
-+  unsigned int max_reg = 7;
-+  int save_all_call_used_regs = FALSE;
-+
-+  /* This only applies for hardware floating-point implementation. */
-+  if (!TARGET_HARD_FLOAT)
-+    return 0;
-+
-+  if (IS_INTERRUPT (func_type))
-+    {
-+
-+      /* Interrupt functions must not corrupt any registers, even call
-+         clobbered ones.  If this is a leaf function we can just examine the
-+         registers used by the RTL, but otherwise we have to assume that
-+         whatever function is called might clobber anything, and so we have
-+         to save all the call-clobbered registers as well.  */
-+      max_reg = 13;
-+      save_all_call_used_regs = !current_function_is_leaf;
-+    }
-+
-+  /* All used registers used must be saved */
-+  for (reg = 0; reg <= max_reg; reg++)
-+    if (regs_ever_live[INTERNAL_FP_REGNUM (reg)]
-+	|| (save_all_call_used_regs
-+	    && call_used_regs[INTERNAL_FP_REGNUM (reg)]))
-+      save_reg_mask |= (1 << reg);
-+
-+  return save_reg_mask;
-+}
-+
-+/*Compute mask of registers which needs saving upon function entry */
-+static unsigned long
-+avr32_compute_save_reg_mask (int push)
-+{
-+  unsigned long func_type;
-+  unsigned int save_reg_mask = 0;
-+  unsigned int reg;
-+
-+  func_type = avr32_current_func_type ();
-+
-+  if (IS_INTERRUPT (func_type))
-+    {
-+      unsigned int max_reg = 12;
-+
-+
-+      /* Get the banking scheme for the interrupt */
-+      switch (func_type)
-+	{
-+	case AVR32_FT_ISR_FULL:
-+	  max_reg = 0;
-+	  break;
-+	case AVR32_FT_ISR_HALF:
-+	  max_reg = 7;
-+	  break;
-+	case AVR32_FT_ISR_NONE:
-+	  max_reg = 12;
-+	  break;
-+	}
-+
-+      /* Interrupt functions must not corrupt any registers, even call
-+         clobbered ones.  If this is a leaf function we can just examine the
-+         registers used by the RTL, but otherwise we have to assume that
-+         whatever function is called might clobber anything, and so we have
-+         to save all the call-clobbered registers as well.  */
-+
-+      /* Need not push the registers r8-r12 for AVR32A architectures, as this
-+         is automatially done in hardware. We also do not have any shadow
-+         registers. */
-+      if (avr32_arch->uarch_type == UARCH_TYPE_AVR32A)
-+	{
-+	  max_reg = 7;
-+	  func_type = AVR32_FT_ISR_NONE;
-+	}
-+
-+      /* All registers which are used and is not shadowed must be saved */
-+      for (reg = 0; reg <= max_reg; reg++)
-+	if (regs_ever_live[INTERNAL_REGNUM (reg)]
-+	    || (!current_function_is_leaf
-+		&& call_used_regs[INTERNAL_REGNUM (reg)]))
-+	  save_reg_mask |= (1 << reg);
-+
-+      /* Check LR */
-+      if ((regs_ever_live[LR_REGNUM] || !current_function_is_leaf || frame_pointer_needed) && (func_type == AVR32_FT_ISR_NONE)	/* Only
-+																   non-shadowed
-+																   register
-+																   models
-+																 */ )
-+	save_reg_mask |= (1 << ASM_REGNUM (LR_REGNUM));
-+
-+      /* Make sure that the GOT register is pushed. */
-+      if (max_reg >= ASM_REGNUM (PIC_OFFSET_TABLE_REGNUM)
-+	  && current_function_uses_pic_offset_table)
-+	save_reg_mask |= (1 << ASM_REGNUM (PIC_OFFSET_TABLE_REGNUM));
-+
-+    }
-+  else
-+    {
-+      int use_pushm = optimize_size;
-+
-+      /* In the normal case we only need to save those registers which are
-+         call saved and which are used by this function.  */
-+      for (reg = 0; reg <= 7; reg++)
-+	if (regs_ever_live[INTERNAL_REGNUM (reg)]
-+	    && !call_used_regs[INTERNAL_REGNUM (reg)])
-+	  save_reg_mask |= (1 << reg);
-+
-+      /* Make sure that the GOT register is pushed. */
-+      if (current_function_uses_pic_offset_table)
-+	save_reg_mask |= (1 << ASM_REGNUM (PIC_OFFSET_TABLE_REGNUM));
-+
-+
-+      /* If we optimize for size and do not have anonymous arguments: use
-+         popm/pushm always */
-+      if (use_pushm)
-+	{
-+	  if ((save_reg_mask & (1 << 0))
-+	      || (save_reg_mask & (1 << 1))
-+	      || (save_reg_mask & (1 << 2)) || (save_reg_mask & (1 << 3)))
-+	    save_reg_mask |= 0xf;
-+
-+	  if ((save_reg_mask & (1 << 4))
-+	      || (save_reg_mask & (1 << 5))
-+	      || (save_reg_mask & (1 << 6)) || (save_reg_mask & (1 << 7)))
-+	    save_reg_mask |= 0xf0;
-+
-+	  if ((save_reg_mask & (1 << 8)) || (save_reg_mask & (1 << 9)))
-+	    save_reg_mask |= 0x300;
-+	}
-+
-+
-+      /* Check LR */
-+      if ((regs_ever_live[LR_REGNUM] || !current_function_is_leaf ||
-+	   (optimize_size && save_reg_mask) || frame_pointer_needed))
-+	{
-+	  if (push)
-+	    {
-+	      /* Push/Pop LR */
-+	      save_reg_mask |= (1 << ASM_REGNUM (LR_REGNUM));
-+	    }
-+	  else
-+	    {
-+	      /* Pop PC */
-+	      save_reg_mask |= (1 << ASM_REGNUM (PC_REGNUM));
-+	    }
-+	}
-+    }
-+
-+  return save_reg_mask;
-+}
-+
-+/*Compute total size in bytes of all saved registers  */
-+static int
-+avr32_get_reg_mask_size (int reg_mask)
-+{
-+  int reg, size;
-+  size = 0;
-+
-+  for (reg = 0; reg <= 15; reg++)
-+    if (reg_mask & (1 << reg))
-+      size += 4;
-+
-+  return size;
-+}
-+
-+/*Get a register from one of the registers which are saved onto the stack
-+  upon function entry */
-+
-+static int
-+avr32_get_saved_reg (int save_reg_mask)
-+{
-+  unsigned int reg;
-+
-+  /* Find the first register which is saved in the saved_reg_mask */
-+  for (reg = 0; reg <= 15; reg++)
-+    if (save_reg_mask & (1 << reg))
-+      return reg;
-+
-+  return -1;
-+}
-+
-+/* Return 1 if it is possible to return using a single instruction.  */
-+int
-+avr32_use_return_insn (int iscond)
-+{
-+  unsigned int func_type = avr32_current_func_type ();
-+  unsigned long saved_int_regs;
-+  unsigned long saved_fp_regs;
-+
-+  /* Never use a return instruction before reload has run.  */
-+  if (!reload_completed)
-+    return 0;
-+
-+  /* Must adjust the stack for vararg functions. */
-+  if (current_function_args_info.uses_anonymous_args)
-+    return 0;
-+
-+  /* If there a stack adjstment.  */
-+  if (get_frame_size ())
-+    return 0;
-+
-+  saved_int_regs = avr32_compute_save_reg_mask (TRUE);
-+  saved_fp_regs = avr32_compute_save_fp_reg_mask ();
-+
-+  /* Functions which have saved fp-regs on the stack can not be performed in
-+     one instruction */
-+  if (saved_fp_regs)
-+    return 0;
-+
-+  /* Conditional returns can not be performed in one instruction if we need
-+     to restore registers from the stack */
-+  if (iscond && saved_int_regs)
-+    return 0;
-+
-+  /* Conditional return can not be used for interrupt handlers. */
-+  if (iscond && IS_INTERRUPT (func_type))
-+    return 0;
-+
-+  /* For interrupt handlers which needs to pop registers */
-+  if (saved_int_regs && IS_INTERRUPT (func_type))
-+    return 0;
-+
-+
-+  /* If there are saved registers but the LR isn't saved, then we need two
-+     instructions for the return.  */
-+  if (saved_int_regs && !(saved_int_regs & (1 << ASM_REGNUM (LR_REGNUM))))
-+    return 0;
-+
-+
-+  return 1;
-+}
-+
-+
-+/*Generate some function prologue info in the assembly file*/
-+
-+void
-+avr32_target_asm_function_prologue (FILE * f, HOST_WIDE_INT frame_size)
-+{
-+  if (IS_NAKED (avr32_current_func_type ()))
-+    fprintf (f,
-+	     "\t# Function is naked: Prologue and epilogue provided by programmer\n");
-+
-+  if (IS_INTERRUPT (avr32_current_func_type ()))
-+    {
-+      switch (avr32_current_func_type ())
-+	{
-+	case AVR32_FT_ISR_FULL:
-+	  fprintf (f,
-+		   "\t# Interrupt Function: Fully shadowed register file\n");
-+	  break;
-+	case AVR32_FT_ISR_HALF:
-+	  fprintf (f,
-+		   "\t# Interrupt Function: Half shadowed register file\n");
-+	  break;
-+	default:
-+	case AVR32_FT_ISR_NONE:
-+	  fprintf (f, "\t# Interrupt Function: No shadowed register file\n");
-+	  break;
-+	}
-+    }
-+
-+
-+  fprintf (f, "\t# args = %i, frame = %li, pretend = %i\n",
-+	   current_function_args_size, frame_size,
-+	   current_function_pretend_args_size);
-+
-+  fprintf (f, "\t# frame_needed = %i, leaf_function = %i\n",
-+	   frame_pointer_needed, current_function_is_leaf);
-+
-+  fprintf (f, "\t# uses_anonymous_args = %i\n",
-+	   current_function_args_info.uses_anonymous_args);
-+}
-+
-+
-+/* Generate and emit an insn that we will recognize as a pushm or stm.
-+   Unfortunately, since this insn does not reflect very well the actual
-+   semantics of the operation, we need to annotate the insn for the benefit
-+   of DWARF2 frame unwind information.  */
-+
-+int avr32_convert_to_reglist16 (int reglist8_vect);
-+
-+static rtx
-+emit_multi_reg_push (int reglist, int usePUSHM)
-+{
-+  rtx insn;
-+  rtx dwarf;
-+  rtx tmp;
-+  rtx reg;
-+  int i;
-+  int nr_regs;
-+  int index = 0;
-+
-+  if (usePUSHM)
-+    {
-+      insn = emit_insn (gen_pushm (gen_rtx_CONST_INT (SImode, reglist)));
-+      reglist = avr32_convert_to_reglist16 (reglist);
-+    }
-+  else
-+    {
-+      insn = emit_insn (gen_stm (stack_pointer_rtx,
-+				 gen_rtx_CONST_INT (SImode, reglist),
-+				 gen_rtx_CONST_INT (SImode, 1)));
-+    }
-+
-+  nr_regs = avr32_get_reg_mask_size (reglist) / 4;
-+  dwarf = gen_rtx_SEQUENCE (VOIDmode, rtvec_alloc (nr_regs + 1));
-+
-+  for (i = 15; i >= 0; i--)
-+    {
-+      if (reglist & (1 << i))
-+	{
-+	  reg = gen_rtx_REG (SImode, INTERNAL_REGNUM (i));
-+	  tmp = gen_rtx_SET (VOIDmode,
-+			     gen_rtx_MEM (SImode,
-+					  plus_constant (stack_pointer_rtx,
-+							 4 * index)), reg);
-+	  RTX_FRAME_RELATED_P (tmp) = 1;
-+	  XVECEXP (dwarf, 0, 1 + index++) = tmp;
-+	}
-+    }
-+
-+  tmp = gen_rtx_SET (SImode,
-+		     stack_pointer_rtx,
-+		     gen_rtx_PLUS (SImode,
-+				   stack_pointer_rtx,
-+				   GEN_INT (-4 * nr_regs)));
-+  RTX_FRAME_RELATED_P (tmp) = 1;
-+  XVECEXP (dwarf, 0, 0) = tmp;
-+  REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR, dwarf,
-+					REG_NOTES (insn));
-+  return insn;
-+}
-+
-+
-+static rtx
-+emit_multi_fp_reg_push (int reglist)
-+{
-+  rtx insn;
-+  rtx dwarf;
-+  rtx tmp;
-+  rtx reg;
-+  int i;
-+  int nr_regs;
-+  int index = 0;
-+
-+  insn = emit_insn (gen_stm_fp (stack_pointer_rtx,
-+				gen_rtx_CONST_INT (SImode, reglist),
-+				gen_rtx_CONST_INT (SImode, 1)));
-+
-+  nr_regs = avr32_get_reg_mask_size (reglist) / 4;
-+  dwarf = gen_rtx_SEQUENCE (VOIDmode, rtvec_alloc (nr_regs + 1));
-+
-+  for (i = 15; i >= 0; i--)
-+    {
-+      if (reglist & (1 << i))
-+	{
-+	  reg = gen_rtx_REG (SImode, INTERNAL_FP_REGNUM (i));
-+	  tmp = gen_rtx_SET (VOIDmode,
-+			     gen_rtx_MEM (SImode,
-+					  plus_constant (stack_pointer_rtx,
-+							 4 * index)), reg);
-+	  RTX_FRAME_RELATED_P (tmp) = 1;
-+	  XVECEXP (dwarf, 0, 1 + index++) = tmp;
-+	}
-+    }
-+
-+  tmp = gen_rtx_SET (SImode,
-+		     stack_pointer_rtx,
-+		     gen_rtx_PLUS (SImode,
-+				   stack_pointer_rtx,
-+				   GEN_INT (-4 * nr_regs)));
-+  RTX_FRAME_RELATED_P (tmp) = 1;
-+  XVECEXP (dwarf, 0, 0) = tmp;
-+  REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR, dwarf,
-+					REG_NOTES (insn));
-+  return insn;
-+}
-+
-+rtx
-+avr32_gen_load_multiple (rtx * regs, int count, rtx from,
-+			 int write_back, int in_struct_p, int scalar_p)
-+{
-+
-+  rtx result;
-+  int i = 0, j;
-+
-+  result =
-+    gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count + (write_back ? 1 : 0)));
-+
-+  if (write_back)
-+    {
-+      XVECEXP (result, 0, 0)
-+	= gen_rtx_SET (GET_MODE (from), from,
-+		       plus_constant (from, count * 4));
-+      i = 1;
-+      count++;
-+    }
-+
-+
-+  for (j = 0; i < count; i++, j++)
-+    {
-+      rtx unspec;
-+      rtx mem = gen_rtx_MEM (SImode, plus_constant (from, j * 4));
-+      MEM_IN_STRUCT_P (mem) = in_struct_p;
-+      MEM_SCALAR_P (mem) = scalar_p;
-+      unspec = gen_rtx_UNSPEC (VOIDmode, gen_rtvec (1, mem), UNSPEC_LDM);
-+      XVECEXP (result, 0, i) = gen_rtx_SET (VOIDmode, regs[j], unspec);
-+    }
-+
-+  return result;
-+}
-+
-+
-+rtx
-+avr32_gen_store_multiple (rtx * regs, int count, rtx to,
-+			  int in_struct_p, int scalar_p)
-+{
-+  rtx result;
-+  int i = 0, j;
-+
-+  result = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count));
-+
-+  for (j = 0; i < count; i++, j++)
-+    {
-+      rtx mem = gen_rtx_MEM (SImode, plus_constant (to, j * 4));
-+      MEM_IN_STRUCT_P (mem) = in_struct_p;
-+      MEM_SCALAR_P (mem) = scalar_p;
-+      XVECEXP (result, 0, i)
-+	= gen_rtx_SET (VOIDmode, mem,
-+		       gen_rtx_UNSPEC (VOIDmode,
-+				       gen_rtvec (1, regs[j]),
-+				       UNSPEC_STORE_MULTIPLE));
-+    }
-+
-+  return result;
-+}
-+
-+
-+/* Move a block of memory if it is word aligned or we support unaligned
-+   word memory accesses. The size must be maximum 64 bytes. */
-+
-+int
-+avr32_gen_movmemsi (rtx * operands)
-+{
-+  HOST_WIDE_INT bytes_to_go;
-+  rtx src, dst;
-+  rtx st_src, st_dst;
-+  int ptr_offset = 0;
-+  int block_size;
-+  int dst_in_struct_p, src_in_struct_p;
-+  int dst_scalar_p, src_scalar_p;
-+  int unaligned;
-+
-+  if (GET_CODE (operands[2]) != CONST_INT
-+      || GET_CODE (operands[3]) != CONST_INT
-+      || INTVAL (operands[2]) > 64
-+      || ((INTVAL (operands[3]) & 3) && !TARGET_UNALIGNED_WORD))
-+    return 0;
-+  
-+  unaligned = (INTVAL (operands[3]) & 3) != 0;
-+
-+  block_size = 4;
-+
-+  st_dst = XEXP (operands[0], 0);
-+  st_src = XEXP (operands[1], 0);
-+
-+  dst_in_struct_p = MEM_IN_STRUCT_P (operands[0]);
-+  dst_scalar_p = MEM_SCALAR_P (operands[0]);
-+  src_in_struct_p = MEM_IN_STRUCT_P (operands[1]);
-+  src_scalar_p = MEM_SCALAR_P (operands[1]);
-+
-+  dst = copy_to_mode_reg (SImode, st_dst);
-+  src = copy_to_mode_reg (SImode, st_src);
-+
-+  bytes_to_go = INTVAL (operands[2]);
-+
-+  while (bytes_to_go)
-+    {
-+      enum machine_mode move_mode;
-+      /* Seems to be a problem with reloads for the movti pattern so this is
-+         disabled until that problem is resolved */
-+
-+      /* if ( bytes_to_go >= GET_MODE_SIZE(TImode) ) move_mode = TImode; else
-+       */
-+      if ((bytes_to_go >= GET_MODE_SIZE (DImode)) && !unaligned)
-+	move_mode = DImode;
-+      else if (bytes_to_go >= GET_MODE_SIZE (SImode))
-+	move_mode = SImode;
-+      else
-+	move_mode = QImode;
-+
-+      {
-+	rtx dst_mem = gen_rtx_MEM (move_mode,
-+				   gen_rtx_PLUS (SImode, dst,
-+						 GEN_INT (ptr_offset)));
-+	rtx src_mem = gen_rtx_MEM (move_mode,
-+				   gen_rtx_PLUS (SImode, src,
-+						 GEN_INT (ptr_offset)));
-+	ptr_offset += GET_MODE_SIZE (move_mode);
-+	bytes_to_go -= GET_MODE_SIZE (move_mode);
-+
-+	MEM_IN_STRUCT_P (dst_mem) = dst_in_struct_p;
-+	MEM_SCALAR_P (dst_mem) = dst_scalar_p;
-+
-+	MEM_IN_STRUCT_P (src_mem) = src_in_struct_p;
-+	MEM_SCALAR_P (src_mem) = src_scalar_p;
-+	emit_move_insn (dst_mem, src_mem);
-+
-+      }
-+    }
-+
-+  return 1;
-+}
-+
-+
-+
-+/*Expand the prologue instruction*/
-+void
-+avr32_expand_prologue (void)
-+{
-+  rtx insn, dwarf;
-+  unsigned long saved_reg_mask, saved_fp_reg_mask;
-+  int reglist8 = 0;
-+
-+  /* Naked functions does not have a prologue */
-+  if (IS_NAKED (avr32_current_func_type ()))
-+    return;
-+
-+  saved_reg_mask = avr32_compute_save_reg_mask (TRUE);
-+
-+  if (saved_reg_mask)
-+    {
-+      /* Must push used registers */
-+
-+      /* Should we use POPM or LDM? */
-+      int usePUSHM = TRUE;
-+      reglist8 = 0;
-+      if (((saved_reg_mask & (1 << 0)) ||
-+	   (saved_reg_mask & (1 << 1)) ||
-+	   (saved_reg_mask & (1 << 2)) || (saved_reg_mask & (1 << 3))))
-+	{
-+	  /* One of R0-R3 should at least be pushed */
-+	  if (((saved_reg_mask & (1 << 0)) &&
-+	       (saved_reg_mask & (1 << 1)) &&
-+	       (saved_reg_mask & (1 << 2)) && (saved_reg_mask & (1 << 3))))
-+	    {
-+	      /* All should be pushed */
-+	      reglist8 |= 0x01;
-+	    }
-+	  else
-+	    {
-+	      usePUSHM = FALSE;
-+	    }
-+	}
-+
-+      if (((saved_reg_mask & (1 << 4)) ||
-+	   (saved_reg_mask & (1 << 5)) ||
-+	   (saved_reg_mask & (1 << 6)) || (saved_reg_mask & (1 << 7))))
-+	{
-+	  /* One of R4-R7 should at least be pushed */
-+	  if (((saved_reg_mask & (1 << 4)) &&
-+	       (saved_reg_mask & (1 << 5)) &&
-+	       (saved_reg_mask & (1 << 6)) && (saved_reg_mask & (1 << 7))))
-+	    {
-+	      if (usePUSHM)
-+		/* All should be pushed */
-+		reglist8 |= 0x02;
-+	    }
-+	  else
-+	    {
-+	      usePUSHM = FALSE;
-+	    }
-+	}
-+
-+      if (((saved_reg_mask & (1 << 8)) || (saved_reg_mask & (1 << 9))))
-+	{
-+	  /* One of R8-R9 should at least be pushed */
-+	  if (((saved_reg_mask & (1 << 8)) && (saved_reg_mask & (1 << 9))))
-+	    {
-+	      if (usePUSHM)
-+		/* All should be pushed */
-+		reglist8 |= 0x04;
-+	    }
-+	  else
-+	    {
-+	      usePUSHM = FALSE;
-+	    }
-+	}
-+
-+      if (saved_reg_mask & (1 << 10))
-+	reglist8 |= 0x08;
-+
-+      if (saved_reg_mask & (1 << 11))
-+	reglist8 |= 0x10;
-+
-+      if (saved_reg_mask & (1 << 12))
-+	reglist8 |= 0x20;
-+
-+      if (saved_reg_mask & (1 << ASM_REGNUM (LR_REGNUM)))
-+	{
-+	  /* Push LR */
-+	  reglist8 |= 0x40;
-+	}
-+
-+      if (usePUSHM)
-+	{
-+	  insn = emit_multi_reg_push (reglist8, TRUE);
-+	}
-+      else
-+	{
-+	  insn = emit_multi_reg_push (saved_reg_mask, FALSE);
-+	}
-+      RTX_FRAME_RELATED_P (insn) = 1;
-+
-+      /* Prevent this instruction from being scheduled after any other
-+         instructions.  */
-+      emit_insn (gen_blockage ());
-+    }
-+
-+  saved_fp_reg_mask = avr32_compute_save_fp_reg_mask ();
-+  if (saved_fp_reg_mask)
-+    {
-+      insn = emit_multi_fp_reg_push (saved_fp_reg_mask);
-+      RTX_FRAME_RELATED_P (insn) = 1;
-+
-+      /* Prevent this instruction from being scheduled after any other
-+         instructions.  */
-+      emit_insn (gen_blockage ());
-+    }
-+
-+  /* Set frame pointer */
-+  if (frame_pointer_needed)
-+    {
-+      insn = emit_move_insn (frame_pointer_rtx, stack_pointer_rtx);
-+      RTX_FRAME_RELATED_P (insn) = 1;
-+    }
-+
-+  if (get_frame_size () > 0)
-+    {
-+      if (avr32_const_ok_for_constraint_p (get_frame_size (), 'K', "Ks21"))
-+	{
-+	  insn = emit_insn (gen_rtx_SET (SImode,
-+					 stack_pointer_rtx,
-+					 gen_rtx_PLUS (SImode,
-+						       stack_pointer_rtx,
-+						       gen_rtx_CONST_INT
-+						       (SImode,
-+							-get_frame_size
-+							()))));
-+	  RTX_FRAME_RELATED_P (insn) = 1;
-+	}
-+      else
-+	{
-+	  /* Immediate is larger than k21 We must either check if we can use
-+	     one of the pushed reegisters as temporary storage or we must
-+	     make us a temp register by pushing a register to the stack. */
-+	  rtx temp_reg, const_pool_entry, insn;
-+	  if (saved_reg_mask)
-+	    {
-+	      temp_reg =
-+		gen_rtx_REG (SImode,
-+			     INTERNAL_REGNUM (avr32_get_saved_reg
-+					      (saved_reg_mask)));
-+	    }
-+	  else
-+	    {
-+	      temp_reg = gen_rtx_REG (SImode, INTERNAL_REGNUM (7));
-+	      emit_move_insn (gen_rtx_MEM
-+			      (SImode,
-+			       gen_rtx_PRE_DEC (SImode, stack_pointer_rtx)),
-+			      temp_reg);
-+	    }
-+
-+	  const_pool_entry =
-+	    force_const_mem (SImode,
-+			     gen_rtx_CONST_INT (SImode, get_frame_size ()));
-+	  emit_move_insn (temp_reg, const_pool_entry);
-+
-+	  insn = emit_insn (gen_rtx_SET (SImode,
-+					 stack_pointer_rtx,
-+					 gen_rtx_MINUS (SImode,
-+							stack_pointer_rtx,
-+							temp_reg)));
-+
-+	  dwarf = gen_rtx_SET (VOIDmode, stack_pointer_rtx,
-+			       gen_rtx_PLUS (SImode, stack_pointer_rtx,
-+					     GEN_INT (-get_frame_size ())));
-+	  REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR,
-+						dwarf, REG_NOTES (insn));
-+	  RTX_FRAME_RELATED_P (insn) = 1;
-+
-+	  if (!saved_reg_mask)
-+	    {
-+	      insn =
-+		emit_move_insn (temp_reg,
-+				gen_rtx_MEM (SImode,
-+					     gen_rtx_POST_INC (SImode,
-+							       gen_rtx_REG
-+							       (SImode,
-+								13))));
-+	    }
-+
-+	  /* Mark the temp register as dead */
-+	  REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_DEAD, temp_reg,
-+						REG_NOTES (insn));
-+
-+
-+	}
-+
-+      /* Prevent the the stack adjustment to be scheduled after any
-+         instructions using the frame pointer.  */
-+      emit_insn (gen_blockage ());
-+    }
-+
-+  /* Load GOT */
-+  if (flag_pic)
-+    {
-+      avr32_load_pic_register ();
-+
-+      /* gcc does not know that load or call instructions might use the pic
-+         register so it might schedule these instructions before the loading
-+         of the pic register. To avoid this emit a barrier for now. TODO!
-+         Find out a better way to let gcc know which instructions might use
-+         the pic register. */
-+      emit_insn (gen_blockage ());
-+    }
-+  return;
-+}
-+
-+void
-+avr32_set_return_address (rtx source)
-+{
-+  rtx addr;
-+  unsigned long saved_regs;
-+
-+  saved_regs = avr32_compute_save_reg_mask (TRUE);
-+
-+  if (!(saved_regs & (1 << ASM_REGNUM (LR_REGNUM))))
-+    emit_move_insn (gen_rtx_REG (Pmode, LR_REGNUM), source);
-+  else
-+    {
-+      if (frame_pointer_needed)
-+	addr = gen_rtx_REG (Pmode, FRAME_POINTER_REGNUM);
-+      else
-+	/* FIXME: Need to use scratch register if frame is large */
-+	addr = plus_constant (stack_pointer_rtx, get_frame_size ());
-+
-+      emit_move_insn (gen_rtx_MEM (Pmode, addr), source);
-+    }
-+}
-+
-+
-+
-+/* Return the length of INSN.  LENGTH is the initial length computed by
-+   attributes in the machine-description file.  */
-+
-+int
-+avr32_adjust_insn_length (rtx insn ATTRIBUTE_UNUSED,
-+			  int length ATTRIBUTE_UNUSED)
-+{
-+  return length;
-+}
-+
-+void
-+avr32_output_return_instruction (int single_ret_inst ATTRIBUTE_UNUSED,
-+				 int iscond ATTRIBUTE_UNUSED,
-+				 rtx cond ATTRIBUTE_UNUSED, rtx r12_imm)
-+{
-+
-+  unsigned long saved_reg_mask, saved_fp_reg_mask;
-+  int insert_ret = TRUE;
-+  int reglist8 = 0;
-+  int stack_adjustment = get_frame_size ();
-+  unsigned int func_type = avr32_current_func_type ();
-+  FILE *f = asm_out_file;
-+
-+  /* Naked functions does not have an epilogue */
-+  if (IS_NAKED (func_type))
-+    return;
-+
-+  saved_fp_reg_mask = avr32_compute_save_fp_reg_mask ();
-+
-+  saved_reg_mask = avr32_compute_save_reg_mask (FALSE);
-+
-+  /* Reset frame pointer */
-+  if (stack_adjustment > 0)
-+    {
-+      if (avr32_const_ok_for_constraint_p (stack_adjustment, 'I', "Is21"))
-+	{
-+	  fprintf (f, "\tsub sp, %i # Reset Frame Pointer\n",
-+		   -stack_adjustment);
-+	}
-+      else
-+	{
-+	  /* TODO! Is it safe to use r8 as scratch?? */
-+	  fprintf (f, "\tmov r8, lo(%i) # Reset Frame Pointer\n",
-+		   -stack_adjustment);
-+	  fprintf (f, "\torh r8, hi(%i) # Reset Frame Pointer\n",
-+		   -stack_adjustment);
-+	  fprintf (f, "\tadd sp,r8  # Reset Frame Pointer\n");
-+	}
-+    }
-+
-+  if (saved_fp_reg_mask)
-+    {
-+      char reglist[64];		/* 64 bytes should be enough... */
-+      avr32_make_fp_reglist_w (saved_fp_reg_mask, (char *) reglist);
-+      fprintf (f, "\tldcm.w\tcp0, sp++, %s\n", reglist);
-+      if (saved_fp_reg_mask & ~0xff)
-+	{
-+	  saved_fp_reg_mask &= ~0xff;
-+	  avr32_make_fp_reglist_d (saved_fp_reg_mask, (char *) reglist);
-+	  fprintf (f, "\tldcm.d\tcp0, sp++, %s\n", reglist);
-+	}
-+    }
-+
-+  if (saved_reg_mask)
-+    {
-+      /* Must pop used registers */
-+
-+      /* Should we use POPM or LDM? */
-+      int usePOPM = TRUE;
-+      if (((saved_reg_mask & (1 << 0)) ||
-+	   (saved_reg_mask & (1 << 1)) ||
-+	   (saved_reg_mask & (1 << 2)) || (saved_reg_mask & (1 << 3))))
-+	{
-+	  /* One of R0-R3 should at least be popped */
-+	  if (((saved_reg_mask & (1 << 0)) &&
-+	       (saved_reg_mask & (1 << 1)) &&
-+	       (saved_reg_mask & (1 << 2)) && (saved_reg_mask & (1 << 3))))
-+	    {
-+	      /* All should be popped */
-+	      reglist8 |= 0x01;
-+	    }
-+	  else
-+	    {
-+	      usePOPM = FALSE;
-+	    }
-+	}
-+
-+      if (((saved_reg_mask & (1 << 4)) ||
-+	   (saved_reg_mask & (1 << 5)) ||
-+	   (saved_reg_mask & (1 << 6)) || (saved_reg_mask & (1 << 7))))
-+	{
-+	  /* One of R0-R3 should at least be popped */
-+	  if (((saved_reg_mask & (1 << 4)) &&
-+	       (saved_reg_mask & (1 << 5)) &&
-+	       (saved_reg_mask & (1 << 6)) && (saved_reg_mask & (1 << 7))))
-+	    {
-+	      if (usePOPM)
-+		/* All should be popped */
-+		reglist8 |= 0x02;
-+	    }
-+	  else
-+	    {
-+	      usePOPM = FALSE;
-+	    }
-+	}
-+
-+      if (((saved_reg_mask & (1 << 8)) || (saved_reg_mask & (1 << 9))))
-+	{
-+	  /* One of R8-R9 should at least be pushed */
-+	  if (((saved_reg_mask & (1 << 8)) && (saved_reg_mask & (1 << 9))))
-+	    {
-+	      if (usePOPM)
-+		/* All should be pushed */
-+		reglist8 |= 0x04;
-+	    }
-+	  else
-+	    {
-+	      usePOPM = FALSE;
-+	    }
-+	}
-+
-+      if (saved_reg_mask & (1 << 10))
-+	reglist8 |= 0x08;
-+
-+      if (saved_reg_mask & (1 << 11))
-+	reglist8 |= 0x10;
-+
-+      if (saved_reg_mask & (1 << 12))
-+	reglist8 |= 0x20;
-+
-+      if (saved_reg_mask & (1 << ASM_REGNUM (LR_REGNUM)))
-+	/* Pop LR */
-+	reglist8 |= 0x40;
-+
-+      if (saved_reg_mask & (1 << ASM_REGNUM (PC_REGNUM)))
-+	/* Pop LR into PC. */
-+	reglist8 |= 0x80;
-+
-+      if (usePOPM)
-+	{
-+	  char reglist[64];	/* 64 bytes should be enough... */
-+	  avr32_make_reglist8 (reglist8, (char *) reglist);
-+
-+	  if (reglist8 & 0x80)
-+	    /* This instruction is also a return */
-+	    insert_ret = FALSE;
-+
-+	  if (r12_imm && !insert_ret)
-+	    fprintf (f, "\tpopm    %s, r12=%li\n", reglist, INTVAL (r12_imm));
-+	  else
-+	    fprintf (f, "\tpopm    %s\n", reglist);
-+
-+	}
-+      else
-+	{
-+	  char reglist[64];	/* 64 bytes should be enough... */
-+	  avr32_make_reglist16 (saved_reg_mask, (char *) reglist);
-+	  if (saved_reg_mask & (1 << ASM_REGNUM (PC_REGNUM)))
-+	    /* This instruction is also a return */
-+	    insert_ret = FALSE;
-+
-+	  if (r12_imm && !insert_ret)
-+	    fprintf (f, "\tldm    sp++, %s, r12=%li\n", reglist,
-+		     INTVAL (r12_imm));
-+	  else
-+	    fprintf (f, "\tldm    sp++, %s\n", reglist);
-+
-+	}
-+
-+    }
-+
-+  if (IS_INTERRUPT (func_type))
-+    {
-+      fprintf (f, "\trete\n");
-+    }
-+  else if (insert_ret)
-+    {
-+      if (r12_imm)
-+	fprintf (f, "\tretal    %li\n", INTVAL (r12_imm));
-+      else
-+	fprintf (f, "\tretal    r12\n");
-+    }
-+}
-+
-+/* Function for converting a fp-register mask to a
-+   reglistCPD8 register list string. */
-+void
-+avr32_make_fp_reglist_d (int reglist_mask, char *reglist_string)
-+{
-+  int i;
-+
-+  /* Make sure reglist_string is empty */
-+  reglist_string[0] = '\0';
-+
-+  for (i = 0; i < NUM_FP_REGS; i += 2)
-+    {
-+      if (reglist_mask & (1 << i))
-+	{
-+	  strlen (reglist_string) ?
-+	    sprintf (reglist_string, "%s, %s-%s", reglist_string,
-+		     reg_names[INTERNAL_FP_REGNUM (i)],
-+		     reg_names[INTERNAL_FP_REGNUM (i + 1)]) :
-+	    sprintf (reglist_string, "%s-%s",
-+		     reg_names[INTERNAL_FP_REGNUM (i)],
-+		     reg_names[INTERNAL_FP_REGNUM (i + 1)]);
-+	}
-+    }
-+}
-+
-+/* Function for converting a fp-register mask to a
-+   reglistCP8 register list string. */
-+void
-+avr32_make_fp_reglist_w (int reglist_mask, char *reglist_string)
-+{
-+  int i;
-+
-+  /* Make sure reglist_string is empty */
-+  reglist_string[0] = '\0';
-+
-+  for (i = 0; i < NUM_FP_REGS; ++i)
-+    {
-+      if (reglist_mask & (1 << i))
-+	{
-+	  strlen (reglist_string) ?
-+	    sprintf (reglist_string, "%s, %s", reglist_string,
-+		     reg_names[INTERNAL_FP_REGNUM (i)]) :
-+	    sprintf (reglist_string, "%s", reg_names[INTERNAL_FP_REGNUM (i)]);
-+	}
-+    }
-+}
-+
-+void
-+avr32_make_reglist16 (int reglist16_vect, char *reglist16_string)
-+{
-+  int i;
-+
-+  /* Make sure reglist16_string is empty */
-+  reglist16_string[0] = '\0';
-+
-+  for (i = 0; i < 16; ++i)
-+    {
-+      if (reglist16_vect & (1 << i))
-+	{
-+	  strlen (reglist16_string) ?
-+	    sprintf (reglist16_string, "%s, %s", reglist16_string,
-+		     reg_names[INTERNAL_REGNUM (i)]) :
-+	    sprintf (reglist16_string, "%s", reg_names[INTERNAL_REGNUM (i)]);
-+	}
-+    }
-+}
-+
-+int
-+avr32_convert_to_reglist16 (int reglist8_vect)
-+{
-+  int reglist16_vect = 0;
-+  if (reglist8_vect & 0x1)
-+    reglist16_vect |= 0xF;
-+  if (reglist8_vect & 0x2)
-+    reglist16_vect |= 0xF0;
-+  if (reglist8_vect & 0x4)
-+    reglist16_vect |= 0x300;
-+  if (reglist8_vect & 0x8)
-+    reglist16_vect |= 0x400;
-+  if (reglist8_vect & 0x10)
-+    reglist16_vect |= 0x800;
-+  if (reglist8_vect & 0x20)
-+    reglist16_vect |= 0x1000;
-+  if (reglist8_vect & 0x40)
-+    reglist16_vect |= 0x4000;
-+  if (reglist8_vect & 0x80)
-+    reglist16_vect |= 0x8000;
-+
-+  return reglist16_vect;
-+}
-+
-+void
-+avr32_make_reglist8 (int reglist8_vect, char *reglist8_string)
-+{
-+  /* Make sure reglist8_string is empty */
-+  reglist8_string[0] = '\0';
-+
-+  if (reglist8_vect & 0x1)
-+    sprintf (reglist8_string, "r0-r3");
-+  if (reglist8_vect & 0x2)
-+    strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r4-r7",
-+					reglist8_string) :
-+      sprintf (reglist8_string, "r4-r7");
-+  if (reglist8_vect & 0x4)
-+    strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r8-r9",
-+					reglist8_string) :
-+      sprintf (reglist8_string, "r8-r9");
-+  if (reglist8_vect & 0x8)
-+    strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r10",
-+					reglist8_string) :
-+      sprintf (reglist8_string, "r10");
-+  if (reglist8_vect & 0x10)
-+    strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r11",
-+					reglist8_string) :
-+      sprintf (reglist8_string, "r11");
-+  if (reglist8_vect & 0x20)
-+    strlen (reglist8_string) ? sprintf (reglist8_string, "%s, r12",
-+					reglist8_string) :
-+      sprintf (reglist8_string, "r12");
-+  if (reglist8_vect & 0x40)
-+    strlen (reglist8_string) ? sprintf (reglist8_string, "%s, lr",
-+					reglist8_string) :
-+      sprintf (reglist8_string, "lr");
-+  if (reglist8_vect & 0x80)
-+    strlen (reglist8_string) ? sprintf (reglist8_string, "%s, pc",
-+					reglist8_string) :
-+      sprintf (reglist8_string, "pc");
-+}
-+
-+int
-+avr32_eh_return_data_regno (int n)
-+{
-+  if (n >= 0 && n <= 3)
-+    return 8 + n;
-+  else
-+    return INVALID_REGNUM;
-+}
-+
-+/* Compute the distance from register FROM to register TO.
-+   These can be the arg pointer, the frame pointer or
-+   the stack pointer.
-+   Typical stack layout looks like this:
-+
-+       old stack pointer -> |    |
-+			     ----
-+			    |    | \
-+			    |    |   saved arguments for
-+			    |    |   vararg functions
-+ arg_pointer	->	    |    | /
-+			      --
-+			    |    | \
-+			    |    |   call saved
-+			    |    |   registers
-+			    |    | /
-+  frame ptr	 ->	--
-+			    |    | \
-+			    |    |   local
-+			    |    |   variables
-+  stack ptr -->	     |    | /
-+			      --
-+			    |    | \
-+			    |    |   outgoing
-+			    |    |   arguments
-+			    |    | /
-+			      --
-+
-+  For a given funciton some or all of these stack compomnents
-+  may not be needed, giving rise to the possibility of
-+  eliminating some of the registers.
-+
-+  The values returned by this function must reflect the behaviour
-+  of avr32_expand_prologue() and avr32_compute_save_reg_mask().
-+
-+  The sign of the number returned reflects the direction of stack
-+  growth, so the values are positive for all eliminations except
-+  from the soft frame pointer to the hard frame pointer.  */
-+
-+
-+int
-+avr32_initial_elimination_offset (int from, int to)
-+{
-+  int i;
-+  int call_saved_regs = 0;
-+  unsigned long saved_reg_mask, saved_fp_reg_mask;
-+  unsigned int local_vars = get_frame_size ();
-+
-+  saved_reg_mask = avr32_compute_save_reg_mask (TRUE);
-+  saved_fp_reg_mask = avr32_compute_save_fp_reg_mask ();
-+
-+  for (i = 0; i < 16; ++i)
-+    {
-+      if (saved_reg_mask & (1 << i))
-+	call_saved_regs += 4;
-+    }
-+
-+  for (i = 0; i < NUM_FP_REGS; ++i)
-+    {
-+      if (saved_fp_reg_mask & (1 << i))
-+	call_saved_regs += 4;
-+    }
-+
-+  switch (from)
-+    {
-+    case ARG_POINTER_REGNUM:
-+      switch (to)
-+	{
-+	case STACK_POINTER_REGNUM:
-+	  return call_saved_regs + local_vars;
-+	case FRAME_POINTER_REGNUM:
-+	  return call_saved_regs;
-+	default:
-+	  abort ();
-+	}
-+    case FRAME_POINTER_REGNUM:
-+      switch (to)
-+	{
-+	case STACK_POINTER_REGNUM:
-+	  return local_vars;
-+	default:
-+	  abort ();
-+	}
-+    default:
-+      abort ();
-+    }
-+}
-+
-+
-+/*
-+  Returns a rtx used when passing the next argument to a function.
-+  avr32_init_cumulative_args() and avr32_function_arg_advance() sets witch
-+  register to use.
-+*/
-+rtx
-+avr32_function_arg (CUMULATIVE_ARGS * cum, enum machine_mode mode,
-+		    tree type, int named)
-+{
-+  int index = -1;
-+
-+  HOST_WIDE_INT arg_size, arg_rsize;
-+  if (type)
-+    {
-+      arg_size = int_size_in_bytes (type);
-+    }
-+  else
-+    {
-+      arg_size = GET_MODE_SIZE (mode);
-+    }
-+  arg_rsize = PUSH_ROUNDING (arg_size);
-+
-+  /*
-+     The last time this macro is called, it is called with mode == VOIDmode,
-+     and its result is passed to the call or call_value pattern as operands 2
-+     and 3 respectively. */
-+  if (mode == VOIDmode)
-+    {
-+      return gen_rtx_CONST_INT (SImode, 22);	/* ToDo: fixme. */
-+    }
-+
-+  if ((*targetm.calls.must_pass_in_stack) (mode, type) || !named)
-+    {
-+      return NULL_RTX;
-+    }
-+
-+  if (arg_rsize == 8)
-+    {
-+      /* use r11:r10 or r9:r8. */
-+      if (!(GET_USED_INDEX (cum, 1) || GET_USED_INDEX (cum, 2)))
-+	index = 1;
-+      else if (!(GET_USED_INDEX (cum, 3) || GET_USED_INDEX (cum, 4)))
-+	index = 3;
-+      else
-+	index = -1;
-+    }
-+  else if (arg_rsize == 4)
-+    {				/* Use first available register */
-+      index = 0;
-+      while (index <= LAST_CUM_REG_INDEX && GET_USED_INDEX (cum, index))
-+	index++;
-+      if (index > LAST_CUM_REG_INDEX)
-+	index = -1;
-+    }
-+
-+  SET_REG_INDEX (cum, index);
-+
-+  if (GET_REG_INDEX (cum) >= 0)
-+    return gen_rtx_REG (mode,
-+			avr32_function_arg_reglist[GET_REG_INDEX (cum)]);
-+
-+  return NULL_RTX;
-+}
-+
-+/*
-+  Set the register used for passing the first argument to a function.
-+*/
-+void
-+avr32_init_cumulative_args (CUMULATIVE_ARGS * cum, tree fntype,
-+			    rtx libname ATTRIBUTE_UNUSED,
-+			    tree fndecl ATTRIBUTE_UNUSED)
-+{
-+  /* Set all registers as unused. */
-+  SET_INDEXES_UNUSED (cum);
-+
-+  /* Reset uses_anonymous_args */
-+  cum->uses_anonymous_args = 0;
-+
-+  /* Reset size of stack pushed arguments */
-+  cum->stack_pushed_args_size = 0;
-+
-+  /* If the function is returning a value passed in memory r12 is used as a
-+     Return Value Pointer. */
-+
-+  if (fntype != 0 && avr32_return_in_memory (TREE_TYPE (fntype), fntype))
-+    {
-+      SET_REG_INDEX (cum, 0);
-+      SET_USED_INDEX (cum, GET_REG_INDEX (cum));
-+    }
-+}
-+
-+/*
-+  Set register used for passing the next argument to a function. Only the
-+  Scratch Registers are used.
-+
-+		number  name
-+		   15   r15  PC
-+		   14   r14  LR
-+		   13   r13 _SP_________
-+     FIRST_CUM_REG 12   r12 _||_
-+		   10   r11  ||
-+		   11   r10 _||_  Scratch Registers
-+		    8   r9   ||
-+  LAST_SCRATCH_REG  9   r8  _\/_________
-+		    6   r7   /\
-+		    7   r6   ||
-+		    4   r5   ||
-+		    5   r4   ||
-+		    2   r3   ||
-+		    3   r2   ||
-+		    0   r1   ||
-+		    1   r0  _||_________
-+
-+*/
-+void
-+avr32_function_arg_advance (CUMULATIVE_ARGS * cum, enum machine_mode mode,
-+			    tree type, int named ATTRIBUTE_UNUSED)
-+{
-+  HOST_WIDE_INT arg_size, arg_rsize;
-+
-+  if (type)
-+    {
-+      arg_size = int_size_in_bytes (type);
-+    }
-+  else
-+    {
-+      arg_size = GET_MODE_SIZE (mode);
-+    }
-+  arg_rsize = PUSH_ROUNDING (arg_size);
-+
-+  /* It the argument had to be passed in stack, no register is used. */
-+  if ((*targetm.calls.must_pass_in_stack) (mode, type))
-+    {
-+      cum->stack_pushed_args_size += PUSH_ROUNDING (int_size_in_bytes (type));
-+      return;
-+    }
-+
-+  /* Mark the used registers as "used". */
-+  if (GET_REG_INDEX (cum) >= 0)
-+    {
-+      SET_USED_INDEX (cum, GET_REG_INDEX (cum));
-+      if (arg_rsize == 8)
-+	{
-+	  SET_USED_INDEX (cum, (GET_REG_INDEX (cum) + 1));
-+	}
-+    }
-+  else
-+    {
-+      /* Had to use stack */
-+      cum->stack_pushed_args_size += arg_rsize;
-+    }
-+}
-+
-+/*
-+  Defines witch direction to go to find the next register to use if the
-+  argument is larger then one register or for arguments shorter than an
-+  int which is not promoted, such as the last part of structures with
-+  size not a multiple of 4. */
-+enum direction
-+avr32_function_arg_padding (enum machine_mode mode ATTRIBUTE_UNUSED,
-+			    tree type)
-+{
-+  /* Pad upward for all aggregates except byte and halfword sized aggregates
-+     which can be passed in registers. */
-+  if (type
-+      && AGGREGATE_TYPE_P (type)
-+      && (int_size_in_bytes (type) != 1)
-+      && !((int_size_in_bytes (type) == 2)
-+	   && TYPE_ALIGN_UNIT (type) >= 2)
-+      && (int_size_in_bytes (type) & 0x3))
-+    {
-+      return upward;
-+    }
-+
-+  return downward;
-+}
-+
-+/*
-+  Return a rtx used for the return value from a function call.
-+*/
-+rtx
-+avr32_function_value (tree type, tree func)
-+{
-+  if (avr32_return_in_memory (type, func))
-+    return NULL_RTX;
-+
-+  if (int_size_in_bytes (type) <= 4)
-+    if (avr32_return_in_msb (type))
-+      /* Aggregates of size less than a word which does align the data in the
-+         MSB must use SImode for r12. */
-+      return gen_rtx_REG (SImode, RET_REGISTER);
-+    else
-+      return gen_rtx_REG (TYPE_MODE (type), RET_REGISTER);
-+  else if (int_size_in_bytes (type) <= 8)
-+    return gen_rtx_REG (TYPE_MODE (type), INTERNAL_REGNUM (11));
-+
-+  return NULL_RTX;
-+}
-+
-+/*
-+  Return a rtx used for the return value from a library function call.
-+*/
-+rtx
-+avr32_libcall_value (enum machine_mode mode)
-+{
-+
-+  if (GET_MODE_SIZE (mode) <= 4)
-+    return gen_rtx_REG (mode, RET_REGISTER);
-+  else if (GET_MODE_SIZE (mode) <= 8)
-+    return gen_rtx_REG (mode, INTERNAL_REGNUM (11));
-+  else
-+    return NULL_RTX;
-+}
-+
-+/* Return TRUE if X references a SYMBOL_REF.  */
-+int
-+symbol_mentioned_p (rtx x)
-+{
-+  const char *fmt;
-+  int i;
-+
-+  if (GET_CODE (x) == SYMBOL_REF)
-+    return 1;
-+
-+  fmt = GET_RTX_FORMAT (GET_CODE (x));
-+
-+  for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--)
-+    {
-+      if (fmt[i] == 'E')
-+	{
-+	  int j;
-+
-+	  for (j = XVECLEN (x, i) - 1; j >= 0; j--)
-+	    if (symbol_mentioned_p (XVECEXP (x, i, j)))
-+	      return 1;
-+	}
-+      else if (fmt[i] == 'e' && symbol_mentioned_p (XEXP (x, i)))
-+	return 1;
-+    }
-+
-+  return 0;
-+}
-+
-+/* Return TRUE if X references a LABEL_REF.  */
-+int
-+label_mentioned_p (rtx x)
-+{
-+  const char *fmt;
-+  int i;
-+
-+  if (GET_CODE (x) == LABEL_REF)
-+    return 1;
-+
-+  fmt = GET_RTX_FORMAT (GET_CODE (x));
-+  for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--)
-+    {
-+      if (fmt[i] == 'E')
-+	{
-+	  int j;
-+
-+	  for (j = XVECLEN (x, i) - 1; j >= 0; j--)
-+	    if (label_mentioned_p (XVECEXP (x, i, j)))
-+	      return 1;
-+	}
-+      else if (fmt[i] == 'e' && label_mentioned_p (XEXP (x, i)))
-+	return 1;
-+    }
-+
-+  return 0;
-+}
-+
-+
-+int
-+avr32_legitimate_pic_operand_p (rtx x)
-+{
-+
-+  /* We can't have const, this must be broken down to a symbol. */
-+  if (GET_CODE (x) == CONST)
-+    return FALSE;
-+
-+  /* Can't access symbols or labels via the constant pool either */
-+  if ((GET_CODE (x) == SYMBOL_REF
-+       && CONSTANT_POOL_ADDRESS_P (x)
-+       && (symbol_mentioned_p (get_pool_constant (x))
-+	   || label_mentioned_p (get_pool_constant (x)))))
-+    return FALSE;
-+
-+  return TRUE;
-+}
-+
-+
-+rtx
-+legitimize_pic_address (rtx orig, enum machine_mode mode ATTRIBUTE_UNUSED,
-+			rtx reg)
-+{
-+
-+  if (GET_CODE (orig) == SYMBOL_REF || GET_CODE (orig) == LABEL_REF)
-+    {
-+      int subregs = 0;
-+
-+      if (reg == 0)
-+	{
-+	  if (no_new_pseudos)
-+	    abort ();
-+	  else
-+	    reg = gen_reg_rtx (Pmode);
-+
-+	  subregs = 1;
-+	}
-+
-+      emit_move_insn (reg, orig);
-+
-+      /* Only set current function as using pic offset table if flag_pic is
-+         set. This is because this function is also used if
-+         TARGET_HAS_ASM_ADDR_PSEUDOS is set. */
-+      if (flag_pic)
-+	current_function_uses_pic_offset_table = 1;
-+
-+      /* Put a REG_EQUAL note on this insn, so that it can be optimized by
-+         loop.  */
-+      return reg;
-+    }
-+  else if (GET_CODE (orig) == CONST)
-+    {
-+      rtx base, offset;
-+
-+      if (flag_pic
-+	  && GET_CODE (XEXP (orig, 0)) == PLUS
-+	  && XEXP (XEXP (orig, 0), 0) == pic_offset_table_rtx)
-+	return orig;
-+
-+      if (reg == 0)
-+	{
-+	  if (no_new_pseudos)
-+	    abort ();
-+	  else
-+	    reg = gen_reg_rtx (Pmode);
-+	}
-+
-+      if (GET_CODE (XEXP (orig, 0)) == PLUS)
-+	{
-+	  base =
-+	    legitimize_pic_address (XEXP (XEXP (orig, 0), 0), Pmode, reg);
-+	  offset =
-+	    legitimize_pic_address (XEXP (XEXP (orig, 0), 1), Pmode,
-+				    base == reg ? 0 : reg);
-+	}
-+      else
-+	abort ();
-+
-+      if (GET_CODE (offset) == CONST_INT)
-+	{
-+	  /* The base register doesn't really matter, we only want to test
-+	     the index for the appropriate mode.  */
-+	  if (!avr32_const_ok_for_constraint_p (INTVAL (offset), 'I', "Is21"))
-+	    {
-+	      if (!no_new_pseudos)
-+		offset = force_reg (Pmode, offset);
-+	      else
-+		abort ();
-+	    }
-+
-+	  if (GET_CODE (offset) == CONST_INT)
-+	    return plus_constant (base, INTVAL (offset));
-+	}
-+
-+      return gen_rtx_PLUS (Pmode, base, offset);
-+    }
-+
-+  return orig;
-+}
-+
-+/* Generate code to load the PIC register.  */
-+void
-+avr32_load_pic_register (void)
-+{
-+  rtx l1, pic_tmp;
-+  rtx global_offset_table;
-+
-+  if ((current_function_uses_pic_offset_table == 0) || TARGET_NO_INIT_GOT)
-+    return;
-+
-+  if (!flag_pic)
-+    abort ();
-+
-+  l1 = gen_label_rtx ();
-+
-+  global_offset_table = gen_rtx_SYMBOL_REF (Pmode, "_GLOBAL_OFFSET_TABLE_");
-+  pic_tmp =
-+    gen_rtx_CONST (Pmode,
-+		   gen_rtx_MINUS (SImode, gen_rtx_LABEL_REF (Pmode, l1),
-+				  global_offset_table));
-+  emit_insn (gen_pic_load_addr
-+	     (pic_offset_table_rtx, force_const_mem (SImode, pic_tmp)));
-+  emit_insn (gen_pic_compute_got_from_pc (pic_offset_table_rtx, l1));
-+
-+  /* Need to emit this whether or not we obey regdecls, since setjmp/longjmp
-+     can cause life info to screw up.  */
-+  emit_insn (gen_rtx_USE (VOIDmode, pic_offset_table_rtx));
-+}
-+
-+
-+
-+/* This hook should return true if values of type type are returned at the most
-+   significant end of a register (in other words, if they are padded at the
-+   least significant end). You can assume that type is returned in a register;
-+   the caller is required to check this.  Note that the register provided by
-+   FUNCTION_VALUE must be able to hold the complete return value. For example,
-+   if a 1-, 2- or 3-byte structure is returned at the most significant end of a
-+   4-byte register, FUNCTION_VALUE should provide an SImode rtx. */
-+bool
-+avr32_return_in_msb (tree type ATTRIBUTE_UNUSED)
-+{
-+  /* if ( AGGREGATE_TYPE_P (type) ) if ((int_size_in_bytes(type) == 1) ||
-+     ((int_size_in_bytes(type) == 2) && TYPE_ALIGN_UNIT(type) >= 2)) return
-+     false; else return true; */
-+
-+  return false;
-+}
-+
-+
-+/*
-+  Returns one if a certain function value is going to be returned in memory
-+  and zero if it is going to be returned in a register.
-+
-+  BLKmode and all other modes that is larger than 64 bits are returned in
-+  memory.
-+*/
-+bool
-+avr32_return_in_memory (tree type, tree fntype ATTRIBUTE_UNUSED)
-+{
-+  if (TYPE_MODE (type) == VOIDmode)
-+    return false;
-+
-+  if (int_size_in_bytes (type) > (2 * UNITS_PER_WORD)
-+      || int_size_in_bytes (type) == -1)
-+    {
-+      return true;
-+    }
-+
-+  /* If we have an aggregate then use the same mechanism as when checking if
-+     it should be passed on the stack. */
-+  if (type
-+      && AGGREGATE_TYPE_P (type)
-+      && (*targetm.calls.must_pass_in_stack) (TYPE_MODE (type), type))
-+    return true;
-+
-+  return false;
-+}
-+
-+
-+/* Output the constant part of the trampoline.
-+   lddpc    r0, pc[0x8:e] ; load static chain register
-+   lddpc    pc, pc[0x8:e] ; jump to subrutine
-+   .long    0		 ; Address to static chain,
-+			 ; filled in by avr32_initialize_trampoline()
-+   .long    0		 ; Address to subrutine,
-+			 ; filled in by avr32_initialize_trampoline()
-+*/
-+void
-+avr32_trampoline_template (FILE * file)
-+{
-+  fprintf (file, "\tlddpc    r0, pc[8]\n");
-+  fprintf (file, "\tlddpc    pc, pc[8]\n");
-+  /* make room for the address of the static chain. */
-+  fprintf (file, "\t.long\t0\n");
-+  /* make room for the address to the subrutine. */
-+  fprintf (file, "\t.long\t0\n");
-+}
-+
-+
-+/*
-+  Initialize the variable parts of a trampoline.
-+*/
-+void
-+avr32_initialize_trampoline (rtx addr, rtx fnaddr, rtx static_chain)
-+{
-+  /* Store the address to the static chain. */
-+  emit_move_insn (gen_rtx_MEM
-+		  (SImode, plus_constant (addr, TRAMPOLINE_SIZE - 4)),
-+		  static_chain);
-+
-+  /* Store the address to the function. */
-+  emit_move_insn (gen_rtx_MEM (SImode, plus_constant (addr, TRAMPOLINE_SIZE)),
-+		  fnaddr);
-+
-+  emit_insn (gen_cache (gen_rtx_REG (SImode, 13),
-+			gen_rtx_CONST_INT (SImode,
-+					   AVR32_CACHE_INVALIDATE_ICACHE)));
-+}
-+
-+/* Return nonzero if X is valid as an addressing register.  */
-+int
-+avr32_address_register_rtx_p (rtx x, int strict_p)
-+{
-+  int regno;
-+
-+  if (GET_CODE (x) != REG)
-+    return 0;
-+
-+  regno = REGNO (x);
-+
-+  if (strict_p)
-+    return REGNO_OK_FOR_BASE_P (regno);
-+
-+  return (regno <= LAST_REGNUM || regno >= FIRST_PSEUDO_REGISTER);
-+}
-+
-+/* Return nonzero if INDEX is valid for an address index operand.  */
-+int
-+avr32_legitimate_index_p (enum machine_mode mode, rtx index, int strict_p)
-+{
-+  enum rtx_code code = GET_CODE (index);
-+
-+  if (mode == TImode)
-+    return 0;
-+
-+  /* Standard coprocessor addressing modes.  */
-+  if (code == CONST_INT)
-+    {
-+      if (TARGET_HARD_FLOAT && GET_MODE_CLASS (mode) == MODE_FLOAT)
-+	/* Coprocessor mem insns has a smaller reach than ordinary mem insns */
-+	return CONST_OK_FOR_CONSTRAINT_P (INTVAL (index), 'K', "Ku14");
-+      else
-+	return CONST_OK_FOR_CONSTRAINT_P (INTVAL (index), 'K', "Ks16");
-+    }
-+
-+  if (avr32_address_register_rtx_p (index, strict_p))
-+    return 1;
-+
-+  if (code == MULT)
-+    {
-+      rtx xiop0 = XEXP (index, 0);
-+      rtx xiop1 = XEXP (index, 1);
-+      return ((avr32_address_register_rtx_p (xiop0, strict_p)
-+	       && power_of_two_operand (xiop1, SImode)
-+	       && (INTVAL (xiop1) <= 8))
-+	      || (avr32_address_register_rtx_p (xiop1, strict_p)
-+		  && power_of_two_operand (xiop0, SImode)
-+		  && (INTVAL (xiop0) <= 8)));
-+    }
-+  else if (code == ASHIFT)
-+    {
-+      rtx op = XEXP (index, 1);
-+
-+      return (avr32_address_register_rtx_p (XEXP (index, 0), strict_p)
-+	      && GET_CODE (op) == CONST_INT
-+	      && INTVAL (op) > 0 && INTVAL (op) <= 3);
-+    }
-+
-+  return 0;
-+}
-+
-+/*
-+  Used in the GO_IF_LEGITIMATE_ADDRESS macro. Returns a nonzero value if
-+  the RTX x is a legitimate memory address.
-+
-+  Returns NO_REGS if the address is not legatime, GENERAL_REGS or ALL_REGS
-+  if it is.
-+*/
-+
-+/* Forward declaration*/
-+int is_minipool_label (rtx label);
-+
-+int
-+avr32_legitimate_address (enum machine_mode mode ATTRIBUTE_UNUSED,
-+			  rtx x, int strict)
-+{
-+
-+  switch (GET_CODE (x))
-+    {
-+    case REG:
-+      return avr32_address_register_rtx_p (x, strict);
-+    case CONST:
-+      {
-+	rtx label = avr32_find_symbol (x);
-+	if (label
-+	    && 
-+            ( (CONSTANT_POOL_ADDRESS_P (label)
-+               && !(flag_pic
-+                    && (symbol_mentioned_p (get_pool_constant (label))
-+                        || label_mentioned_p (get_pool_constant(label)))))
-+              /* TODO! Can this ever happen??? */
-+              || ((GET_CODE (label) == LABEL_REF)
-+                  && GET_CODE (XEXP (label, 0)) == CODE_LABEL
-+                  && is_minipool_label (XEXP (label, 0)))))
-+          {
-+            return TRUE;
-+          }
-+      }
-+      break;
-+    case LABEL_REF:
-+      if (GET_CODE (XEXP (x, 0)) == CODE_LABEL
-+	  && is_minipool_label (XEXP (x, 0)))
-+	{
-+	  return TRUE;
-+	}
-+      break;
-+    case SYMBOL_REF:
-+      {
-+	if (CONSTANT_POOL_ADDRESS_P (x)
-+	    && !(flag_pic
-+		 && (symbol_mentioned_p (get_pool_constant (x))
-+		     || label_mentioned_p (get_pool_constant (x)))))
-+	  return TRUE;
-+	/*
-+	   A symbol_ref is only legal if it is a function. If all of them are
-+	   legal, a pseudo reg that is a constant will be replaced by a
-+	   symbol_ref and make illegale code. SYMBOL_REF_FLAG is set by
-+	   ENCODE_SECTION_INFO. */
-+	else if (SYMBOL_REF_RCALL_FUNCTION_P (x))
-+	  return TRUE;
-+	break;
-+      }
-+    case PRE_DEC:		/* (pre_dec (...)) */
-+    case POST_INC:		/* (post_inc (...)) */
-+      return avr32_address_register_rtx_p (XEXP (x, 0), strict);
-+    case PLUS:			/* (plus (...) (...)) */
-+      {
-+	rtx xop0 = XEXP (x, 0);
-+	rtx xop1 = XEXP (x, 1);
-+
-+	return ((avr32_address_register_rtx_p (xop0, strict)
-+		 && avr32_legitimate_index_p (mode, xop1, strict))
-+		|| (avr32_address_register_rtx_p (xop1, strict)
-+		    && avr32_legitimate_index_p (mode, xop0, strict)));
-+      }
-+    default:
-+      break;
-+    }
-+
-+  return FALSE;
-+}
-+
-+
-+int
-+avr32_const_double_immediate (rtx value)
-+{
-+  HOST_WIDE_INT hi, lo;
-+
-+  if (GET_CODE (value) != CONST_DOUBLE)
-+    return FALSE;
-+
-+  if (GET_MODE (value) == DImode)
-+    {
-+      hi = CONST_DOUBLE_HIGH (value);
-+      lo = CONST_DOUBLE_LOW (value);
-+    }
-+  else
-+    {
-+      HOST_WIDE_INT target_float[2];
-+      hi = lo = 0;
-+      real_to_target (target_float, CONST_DOUBLE_REAL_VALUE (value),
-+		      GET_MODE (value));
-+      lo = target_float[0];
-+      hi = target_float[1];
-+    }
-+  if (avr32_const_ok_for_constraint_p (lo, 'K', "Ks21")
-+      && ((GET_MODE (value) == SFmode)
-+	  || avr32_const_ok_for_constraint_p (hi, 'K', "Ks21")))
-+    {
-+      return TRUE;
-+    }
-+
-+  return FALSE;
-+}
-+
-+
-+int
-+avr32_legitimate_constant_p (rtx x)
-+{
-+  switch (GET_CODE (x))
-+    {
-+    case CONST_INT:
-+      return avr32_const_ok_for_constraint_p (INTVAL (x), 'K', "Ks21");
-+    case CONST_DOUBLE:
-+      if (GET_MODE (x) == SFmode
-+	  || GET_MODE (x) == DFmode || GET_MODE (x) == DImode)
-+	return avr32_const_double_immediate (x);
-+      else
-+	return 0;
-+    case LABEL_REF:
-+      return flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS;
-+    case SYMBOL_REF:
-+      return flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS;
-+    case CONST:
-+      /* We must handle this one in the movsi expansion in order for gcc not
-+         to put it in the constant pool. */
-+      return 0 /* flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS */ ;
-+    case HIGH:
-+    case CONST_VECTOR:
-+      return 0;
-+    default:
-+      printf ("%s():\n", __FUNCTION__);
-+      debug_rtx (x);
-+      return 1;
-+    }
-+}
-+
-+
-+/* Strip any special encoding from labels */
-+const char *
-+avr32_strip_name_encoding (const char *name)
-+{
-+  const char *stripped = name;
-+
-+  while (1)
-+    {
-+      switch (stripped[0])
-+	{
-+	case '#':
-+	  stripped = strchr (name + 1, '#') + 1;
-+	  break;
-+	case '*':
-+	  stripped = &stripped[1];
-+	  break;
-+	default:
-+	  return stripped;
-+	}
-+    }
-+}
-+
-+
-+
-+/* Do anything needed before RTL is emitted for each function.  */
-+static struct machine_function *
-+avr32_init_machine_status (void)
-+{
-+  struct machine_function *machine;
-+  machine =
-+    (machine_function *) ggc_alloc_cleared (sizeof (machine_function));
-+
-+#if AVR32_FT_UNKNOWN != 0
-+  machine->func_type = AVR32_FT_UNKNOWN;
-+#endif
-+
-+  machine->minipool_label_head = 0;
-+  machine->minipool_label_tail = 0;
-+  return machine;
-+}
-+
-+void
-+avr32_init_expanders (void)
-+{
-+  /* Arrange to initialize and mark the machine per-function status.  */
-+  init_machine_status = avr32_init_machine_status;
-+}
-+
-+
-+/* Return an RTX indicating where the return address to the
-+   calling function can be found.  */
-+
-+rtx
-+avr32_return_addr (int count, rtx frame ATTRIBUTE_UNUSED)
-+{
-+  if (count != 0)
-+    return NULL_RTX;
-+
-+  return get_hard_reg_initial_val (Pmode, LR_REGNUM);
-+}
-+
-+
-+void
-+avr32_encode_section_info (tree decl, rtx rtl, int first)
-+{
-+
-+  if (first && DECL_P (decl))
-+    {
-+      /* Set SYMBOL_REG_FLAG for local functions */
-+      if (!TREE_PUBLIC (decl) && TREE_CODE (decl) == FUNCTION_DECL)
-+	{
-+	  if ((*targetm.binds_local_p) (decl))
-+	    {
-+	      SYMBOL_REF_FLAG (XEXP (rtl, 0)) = 1;
-+	    }
-+	}
-+    }
-+}
-+
-+
-+void
-+avr32_asm_output_ascii (FILE * stream, char *ptr, int len)
-+{
-+  int i, i_new = 0;
-+  char *new_ptr = xmalloc (4 * len);
-+  if (new_ptr == NULL)
-+    internal_error ("Out of memory.");
-+
-+  for (i = 0; i < len; i++)
-+    {
-+      if (ptr[i] == '\n')
-+	{
-+	  new_ptr[i_new++] = '\\';
-+	  new_ptr[i_new++] = '0';
-+	  new_ptr[i_new++] = '1';
-+	  new_ptr[i_new++] = '2';
-+	}
-+      else if (ptr[i] == '\"')
-+	{
-+	  new_ptr[i_new++] = '\\';
-+	  new_ptr[i_new++] = '\"';
-+	}
-+      else if (ptr[i] == '\\')
-+	{
-+	  new_ptr[i_new++] = '\\';
-+	  new_ptr[i_new++] = '\\';
-+	}
-+      else if (ptr[i] == '\0' && i + 1 < len)
-+	{
-+	  new_ptr[i_new++] = '\\';
-+	  new_ptr[i_new++] = '0';
-+	}
-+      else
-+	{
-+	  new_ptr[i_new++] = ptr[i];
-+	}
-+    }
-+
-+  /* Terminate new_ptr. */
-+  new_ptr[i_new] = '\0';
-+  fprintf (stream, "\t.ascii\t\"%s\"\n", new_ptr);
-+  free (new_ptr);
-+}
-+
-+
-+void
-+avr32_asm_output_label (FILE * stream, const char *name)
-+{
-+  name = avr32_strip_name_encoding (name);
-+
-+  /* Print the label. */
-+  assemble_name (stream, name);
-+  fprintf (stream, ":\n");
-+}
-+
-+
-+
-+void
-+avr32_asm_weaken_label (FILE * stream, const char *name)
-+{
-+  fprintf (stream, "\t.weak ");
-+  assemble_name (stream, name);
-+  fprintf (stream, "\n");
-+}
-+
-+/*
-+  Checks if a labelref is equal to a reserved word in the assembler. If it is,
-+  insert a '_' before the label name.
-+*/
-+void
-+avr32_asm_output_labelref (FILE * stream, const char *name)
-+{
-+  int verbatim = FALSE;
-+  const char *stripped = name;
-+  int strip_finished = FALSE;
-+
-+  while (!strip_finished)
-+    {
-+      switch (stripped[0])
-+	{
-+	case '#':
-+	  stripped = strchr (name + 1, '#') + 1;
-+	  break;
-+	case '*':
-+	  stripped = &stripped[1];
-+	  verbatim = TRUE;
-+	  break;
-+	default:
-+	  strip_finished = TRUE;
-+	  break;
-+	}
-+    }
-+
-+  if (verbatim)
-+    fputs (stripped, stream);
-+  else
-+    asm_fprintf (stream, "%U%s", stripped);
-+}
-+
-+
-+
-+/*
-+   Check if the comparison in compare_exp is redundant
-+   for the condition given in next_cond given that the
-+   needed flags are already set by an earlier instruction.
-+   Uses cc_prev_status to check this.
-+
-+   Returns NULL_RTX if the compare is not redundant
-+   or the new condition to use in the conditional
-+   instruction if the compare is redundant.
-+*/
-+static rtx
-+is_compare_redundant (rtx compare_exp, rtx next_cond)
-+{
-+  int z_flag_valid = FALSE;
-+  int n_flag_valid = FALSE;
-+  rtx new_cond;
-+
-+  if (GET_CODE (compare_exp) != COMPARE)
-+    return NULL_RTX;
-+
-+
-+  if (GET_MODE (compare_exp) != SImode)
-+    return NULL_RTX;
-+
-+  if (rtx_equal_p (cc_prev_status.mdep.value, compare_exp))
-+    {
-+      /* cc0 already contains the correct comparison -> delete cmp insn */
-+      return next_cond;
-+    }
-+
-+  switch (cc_prev_status.mdep.flags)
-+    {
-+    case CC_SET_VNCZ:
-+    case CC_SET_NCZ:
-+      n_flag_valid = TRUE;
-+    case CC_SET_CZ:
-+    case CC_SET_Z:
-+      z_flag_valid = TRUE;
-+    }
-+
-+  if (cc_prev_status.mdep.value
-+      && REG_P (XEXP (compare_exp, 0))
-+      && REGNO (XEXP (compare_exp, 0)) == REGNO (cc_prev_status.mdep.value)
-+      && GET_CODE (XEXP (compare_exp, 1)) == CONST_INT
-+      && next_cond != NULL_RTX)
-+    {
-+      if (INTVAL (XEXP (compare_exp, 1)) == 0
-+	  && z_flag_valid
-+	  && (GET_CODE (next_cond) == EQ || GET_CODE (next_cond) == NE))
-+	/* We can skip comparison Z flag is already reflecting ops[0] */
-+	return next_cond;
-+      else if (n_flag_valid
-+	       && ((INTVAL (XEXP (compare_exp, 1)) == 0
-+		    && (GET_CODE (next_cond) == GE
-+			|| GET_CODE (next_cond) == LT))
-+		   || (INTVAL (XEXP (compare_exp, 1)) == -1
-+		       && (GET_CODE (next_cond) == GT
-+			   || GET_CODE (next_cond) == LE))))
-+	{
-+	  /* We can skip comparison N flag is already reflecting ops[0],
-+	     which means that we can use the mi/pl conditions to check if
-+	     ops[0] is GE or LT 0. */
-+	  if ((GET_CODE (next_cond) == GE) || (GET_CODE (next_cond) == GT))
-+	    new_cond =
-+	      gen_rtx_UNSPEC (CCmode, gen_rtvec (2, cc0_rtx, const0_rtx),
-+			      UNSPEC_COND_PL);
-+	  else
-+	    new_cond =
-+	      gen_rtx_UNSPEC (CCmode, gen_rtvec (2, cc0_rtx, const0_rtx),
-+			      UNSPEC_COND_MI);
-+	  return new_cond;
-+	}
-+    }
-+  return NULL_RTX;
-+}
-+
-+/* Updates cc_status.  */
-+void
-+avr32_notice_update_cc (rtx exp, rtx insn)
-+{
-+  switch (get_attr_cc (insn))
-+    {
-+    case CC_CALL_SET:
-+      CC_STATUS_INIT;
-+      FPCC_STATUS_INIT;
-+      /* Check if the function call returns a value in r12 */
-+      if (REG_P (recog_data.operand[0])
-+	  && REGNO (recog_data.operand[0]) == RETVAL_REGNUM)
-+	{
-+	  cc_status.flags = 0;
-+	  cc_status.mdep.value =
-+	    gen_rtx_COMPARE (SImode, recog_data.operand[0], const0_rtx);
-+	  cc_status.mdep.flags = CC_SET_VNCZ;
-+
-+	}
-+      break;
-+    case CC_COMPARE:
-+      /* Check that compare will not be optimized away if so nothing should
-+         be done */
-+      if (is_compare_redundant (SET_SRC (exp), get_next_insn_cond (insn))
-+	  == NULL_RTX)
-+	{
-+
-+	  /* Reset the nonstandard flag */
-+	  CC_STATUS_INIT;
-+	  cc_status.flags = 0;
-+	  cc_status.mdep.value = SET_SRC (exp);
-+	  cc_status.mdep.flags = CC_SET_VNCZ;
-+	}
-+      break;
-+    case CC_FPCOMPARE:
-+      /* Check that floating-point compare will not be optimized away if so
-+         nothing should be done */
-+      if (!rtx_equal_p (cc_prev_status.mdep.fpvalue, SET_SRC (exp)))
-+	{
-+	  /* cc0 already contains the correct comparison -> delete cmp insn */
-+	  /* Reset the nonstandard flag */
-+	  cc_status.mdep.fpvalue = SET_SRC (exp);
-+	  cc_status.mdep.fpflags = CC_SET_CZ;
-+	}
-+      break;
-+    case CC_FROM_FPCC:
-+      /* Flags are updated with flags from Floating-point coprocessor, set
-+         CC_NOT_SIGNED flag since the flags are set so that unsigned
-+         condidion codes can be used directly. */
-+      CC_STATUS_INIT;
-+      cc_status.flags = CC_NOT_SIGNED;
-+      cc_status.mdep.value = cc_status.mdep.fpvalue;
-+      cc_status.mdep.flags = cc_status.mdep.fpflags;
-+      break;
-+    case CC_BLD:
-+      /* Bit load is kind of like an inverted testsi, because the Z flag is
-+         inverted */
-+      CC_STATUS_INIT;
-+      cc_status.flags = CC_INVERTED;
-+      cc_status.mdep.value = SET_SRC (exp);
-+      cc_status.mdep.flags = CC_SET_Z;
-+      break;
-+    case CC_NONE:
-+      /* Insn does not affect CC at all. Check if the instruction updates
-+         some of the register currently reflected in cc0 */
-+
-+      if ((GET_CODE (exp) == SET)
-+	  && (cc_status.value1 || cc_status.value2 || cc_status.mdep.value)
-+	  && (reg_mentioned_p (SET_DEST (exp), cc_status.value1)
-+	      || reg_mentioned_p (SET_DEST (exp), cc_status.value2)
-+	      || reg_mentioned_p (SET_DEST (exp), cc_status.mdep.value)))
-+	{
-+	  CC_STATUS_INIT;
-+	}
-+
-+      /* If this is a parallel we must step through each of the parallel
-+         expressions */
-+      if (GET_CODE (exp) == PARALLEL)
-+	{
-+	  int i;
-+	  for (i = 0; i < XVECLEN (exp, 0); ++i)
-+	    {
-+	      rtx vec_exp = XVECEXP (exp, 0, i);
-+	      if ((GET_CODE (vec_exp) == SET)
-+		  && (cc_status.value1 || cc_status.value2
-+		      || cc_status.mdep.value)
-+		  && (reg_mentioned_p (SET_DEST (vec_exp), cc_status.value1)
-+		      || reg_mentioned_p (SET_DEST (vec_exp),
-+					  cc_status.value2)
-+		      || reg_mentioned_p (SET_DEST (vec_exp),
-+					  cc_status.mdep.value)))
-+		{
-+		  CC_STATUS_INIT;
-+		}
-+	    }
-+	}
-+
-+      /* Check if we have memory opartions with post_inc or pre_dec on the
-+         register currently reflected in cc0 */
-+      if (GET_CODE (exp) == SET
-+	  && GET_CODE (SET_SRC (exp)) == MEM
-+	  && (GET_CODE (XEXP (SET_SRC (exp), 0)) == POST_INC
-+	      || GET_CODE (XEXP (SET_SRC (exp), 0)) == PRE_DEC)
-+	  &&
-+	  (reg_mentioned_p
-+	   (XEXP (XEXP (SET_SRC (exp), 0), 0), cc_status.value1)
-+	   || reg_mentioned_p (XEXP (XEXP (SET_SRC (exp), 0), 0),
-+			       cc_status.value2)
-+	   || reg_mentioned_p (XEXP (XEXP (SET_SRC (exp), 0), 0),
-+			       cc_status.mdep.value)))
-+	CC_STATUS_INIT;
-+
-+      if (GET_CODE (exp) == SET
-+	  && GET_CODE (SET_DEST (exp)) == MEM
-+	  && (GET_CODE (XEXP (SET_DEST (exp), 0)) == POST_INC
-+	      || GET_CODE (XEXP (SET_DEST (exp), 0)) == PRE_DEC)
-+	  &&
-+	  (reg_mentioned_p
-+	   (XEXP (XEXP (SET_DEST (exp), 0), 0), cc_status.value1)
-+	   || reg_mentioned_p (XEXP (XEXP (SET_DEST (exp), 0), 0),
-+			       cc_status.value2)
-+	   || reg_mentioned_p (XEXP (XEXP (SET_DEST (exp), 0), 0),
-+			       cc_status.mdep.value)))
-+	CC_STATUS_INIT;
-+      break;
-+
-+    case CC_SET_VNCZ:
-+      CC_STATUS_INIT;
-+      cc_status.mdep.value = recog_data.operand[0];
-+      cc_status.mdep.flags = CC_SET_VNCZ;
-+      break;
-+
-+    case CC_SET_NCZ:
-+      CC_STATUS_INIT;
-+      cc_status.mdep.value = recog_data.operand[0];
-+      cc_status.mdep.flags = CC_SET_NCZ;
-+      break;
-+
-+    case CC_SET_CZ:
-+      CC_STATUS_INIT;
-+      cc_status.mdep.value = recog_data.operand[0];
-+      cc_status.mdep.flags = CC_SET_CZ;
-+      break;
-+
-+    case CC_SET_Z:
-+      CC_STATUS_INIT;
-+      cc_status.mdep.value = recog_data.operand[0];
-+      cc_status.mdep.flags = CC_SET_Z;
-+      break;
-+
-+    case CC_CLOBBER:
-+      CC_STATUS_INIT;
-+      break;
-+
-+    default:
-+      CC_STATUS_INIT;
-+    }
-+}
-+
-+
-+/*
-+  Outputs to stdio stream stream the assembler syntax for an instruction
-+  operand x. x is an RTL expression.
-+*/
-+void
-+avr32_print_operand (FILE * stream, rtx x, int code)
-+{
-+  int error = 0;
-+
-+  switch (GET_CODE (x))
-+    {
-+    case UNSPEC:
-+      switch (XINT (x, 1))
-+	{
-+	case UNSPEC_COND_PL:
-+	  if (code == 'i')
-+	    fputs ("mi", stream);
-+	  else
-+	    fputs ("pl", stream);
-+	  break;
-+	case UNSPEC_COND_MI:
-+	  if (code == 'i')
-+	    fputs ("pl", stream);
-+	  else
-+	    fputs ("mi", stream);
-+	  break;
-+	default:
-+	  error = 1;
-+	}
-+      break;
-+    case EQ:
-+      if (code == 'i')
-+	fputs ("ne", stream);
-+      else
-+	fputs ("eq", stream);
-+      break;
-+    case NE:
-+      if (code == 'i')
-+	fputs ("eq", stream);
-+      else
-+	fputs ("ne", stream);
-+      break;
-+    case GT:
-+      if (code == 'i')
-+	fputs ("le", stream);
-+      else
-+	fputs ("gt", stream);
-+      break;
-+    case GTU:
-+      if (code == 'i')
-+	fputs ("ls", stream);
-+      else
-+	fputs ("hi", stream);
-+      break;
-+    case LT:
-+      if (code == 'i')
-+	fputs ("ge", stream);
-+      else
-+	fputs ("lt", stream);
-+      break;
-+    case LTU:
-+      if (code == 'i')
-+	fputs ("hs", stream);
-+      else
-+	fputs ("lo", stream);
-+      break;
-+    case GE:
-+      if (code == 'i')
-+	fputs ("lt", stream);
-+      else
-+	fputs ("ge", stream);
-+      break;
-+    case GEU:
-+      if (code == 'i')
-+	fputs ("lo", stream);
-+      else
-+	fputs ("hs", stream);
-+      break;
-+    case LE:
-+      if (code == 'i')
-+	fputs ("gt", stream);
-+      else
-+	fputs ("le", stream);
-+      break;
-+    case LEU:
-+      if (code == 'i')
-+	fputs ("hi", stream);
-+      else
-+	fputs ("ls", stream);
-+      break;
-+    case CONST_INT:
-+      {
-+	int value = INTVAL (x);
-+
-+	if (code == 'i')
-+	  {
-+	    value++;
-+	  }
-+
-+	if (code == 'p')
-+	  {
-+	    /* Set to bit position of first bit set in immediate */
-+	    int i, bitpos = 32;
-+	    for (i = 0; i < 32; i++)
-+	      if (value & (1 << i))
-+		{
-+		  bitpos = i;
-+		  break;
-+		}
-+	    value = bitpos;
-+	  }
-+
-+	if (code == 'r')
-+	  {
-+	    /* Reglist 8 */
-+	    char op[50];
-+	    op[0] = '\0';
-+
-+	    if (value & 0x01)
-+	      sprintf (op, "r0-r3");
-+	    if (value & 0x02)
-+	      strlen (op) ? sprintf (op, "%s, r4-r7", op) : sprintf (op,
-+								     "r4-r7");
-+	    if (value & 0x04)
-+	      strlen (op) ? sprintf (op, "%s, r8-r9", op) : sprintf (op,
-+								     "r8-r9");
-+	    if (value & 0x08)
-+	      strlen (op) ? sprintf (op, "%s, r10", op) : sprintf (op, "r10");
-+	    if (value & 0x10)
-+	      strlen (op) ? sprintf (op, "%s, r11", op) : sprintf (op, "r11");
-+	    if (value & 0x20)
-+	      strlen (op) ? sprintf (op, "%s, r12", op) : sprintf (op, "r12");
-+	    if (value & 0x40)
-+	      strlen (op) ? sprintf (op, "%s, lr", op) : sprintf (op, "lr");
-+	    if (value & 0x80)
-+	      strlen (op) ? sprintf (op, "%s, pc", op) : sprintf (op, "pc");
-+
-+	    fputs (op, stream);
-+	  }
-+	else if (code == 's')
-+	  {
-+	    /* Reglist 16 */
-+	    char reglist16_string[100];
-+	    int i;
-+	    reglist16_string[0] = '\0';
-+
-+	    for (i = 0; i < 16; ++i)
-+	      {
-+		if (value & (1 << i))
-+		  {
-+		    strlen (reglist16_string) ? sprintf (reglist16_string,
-+							 "%s, %s",
-+							 reglist16_string,
-+							 reg_names
-+							 [INTERNAL_REGNUM
-+							  (i)]) :
-+		      sprintf (reglist16_string, "%s",
-+			       reg_names[INTERNAL_REGNUM (i)]);
-+		  }
-+	      }
-+	    fputs (reglist16_string, stream);
-+	  }
-+	else if (code == 'C')
-+	  {
-+	    /* RegListCP8 */
-+	    char reglist_string[100];
-+	    avr32_make_fp_reglist_w (value, (char *) reglist_string);
-+	    fputs (reglist_string, stream);
-+	  }
-+	else if (code == 'D')
-+	  {
-+	    /* RegListCPD8 */
-+	    char reglist_string[100];
-+	    avr32_make_fp_reglist_d (value, (char *) reglist_string);
-+	    fputs (reglist_string, stream);
-+	  }
-+	else if (code == 'd')
-+	  {
-+	    /* Print in decimal format */
-+	    fprintf (stream, "%d", value);
-+	  }
-+	else if (code == 'h')
-+	  {
-+	    /* Print halfword part of word */
-+	    fputs (value ? "b" : "t", stream);
-+	  }
-+	else
-+	  {
-+	    /* Normal constant */
-+	    fprintf (stream, "%d", value);
-+	  }
-+	break;
-+      }
-+    case CONST_DOUBLE:
-+      {
-+	HOST_WIDE_INT hi, lo;
-+	if (GET_MODE (x) == DImode)
-+	  {
-+	    hi = CONST_DOUBLE_HIGH (x);
-+	    lo = CONST_DOUBLE_LOW (x);
-+	  }
-+	else
-+	  {
-+	    HOST_WIDE_INT target_float[2];
-+	    hi = lo = 0;
-+	    real_to_target (target_float, CONST_DOUBLE_REAL_VALUE (x),
-+			    GET_MODE (x));
-+	    /* For doubles the most significant part starts at index 0. */
-+	    if (GET_MODE_SIZE (GET_MODE (x)) > UNITS_PER_WORD)
-+	      {
-+		hi = target_float[0];
-+		lo = target_float[1];
-+	      }
-+	    else
-+	      {
-+		lo = target_float[0];
-+	      }
-+	  }
-+
-+	if (avr32_const_ok_for_constraint_p (lo, 'K', "Ks21")
-+	    && ((GET_MODE (x) == SFmode)
-+		|| avr32_const_ok_for_constraint_p (hi, 'K', "Ks21")))
-+	  {
-+	    if (code == 'm')
-+	      fprintf (stream, "%ld", hi);
-+	    else
-+	      fprintf (stream, "%ld", lo);
-+	  }
-+	else
-+	  {
-+	    fprintf (stream, "value too large");
-+	  }
-+	break;
-+      }
-+    case CONST:
-+      output_addr_const (stream, XEXP (XEXP (x, 0), 0));
-+      fprintf (stream, "+%ld", INTVAL (XEXP (XEXP (x, 0), 1)));
-+      break;
-+    case REG:
-+      /* Swap register name if the register is DImode or DFmode. */
-+      if (GET_MODE (x) == DImode || GET_MODE (x) == DFmode)
-+	{
-+	  /* Double register must have an even numbered address */
-+	  gcc_assert (!(REGNO (x) % 2));
-+	  if (code == 'm')
-+	    fputs (reg_names[true_regnum (x)], stream);
-+	  else
-+	    fputs (reg_names[true_regnum (x) + 1], stream);
-+	}
-+      else if (GET_MODE (x) == TImode)
-+	{
-+	  switch (code)
-+	    {
-+	    case 'T':
-+	      fputs (reg_names[true_regnum (x)], stream);
-+	      break;
-+	    case 'U':
-+	      fputs (reg_names[true_regnum (x) + 1], stream);
-+	      break;
-+	    case 'L':
-+	      fputs (reg_names[true_regnum (x) + 2], stream);
-+	      break;
-+	    case 'B':
-+	      fputs (reg_names[true_regnum (x) + 3], stream);
-+	      break;
-+	    default:
-+	      fprintf (stream, "%s, %s, %s, %s",
-+		       reg_names[true_regnum (x) + 3],
-+		       reg_names[true_regnum (x) + 2],
-+		       reg_names[true_regnum (x) + 1],
-+		       reg_names[true_regnum (x)]);
-+	      break;
-+	    }
-+	}
-+      else
-+	{
-+	  fputs (reg_names[true_regnum (x)], stream);
-+	}
-+      break;
-+    case CODE_LABEL:
-+    case LABEL_REF:
-+    case SYMBOL_REF:
-+      output_addr_const (stream, x);
-+      break;
-+    case MEM:
-+      switch (GET_CODE (XEXP (x, 0)))
-+	{
-+	case LABEL_REF:
-+	case SYMBOL_REF:
-+	  output_addr_const (stream, XEXP (x, 0));
-+	  break;
-+	case MEM:
-+	  switch (GET_CODE (XEXP (XEXP (x, 0), 0)))
-+	    {
-+	    case SYMBOL_REF:
-+	      output_addr_const (stream, XEXP (XEXP (x, 0), 0));
-+	      break;
-+	    default:
-+	      error = 1;
-+	      break;
-+	    }
-+	  break;
-+	case REG:
-+	  avr32_print_operand (stream, XEXP (x, 0), 0);
-+	  if (code != 'p')
-+	    fputs ("[0]", stream);
-+	  break;
-+	case PRE_DEC:
-+	  fputs ("--", stream);
-+	  avr32_print_operand (stream, XEXP (XEXP (x, 0), 0), 0);
-+	  break;
-+	case POST_INC:
-+	  avr32_print_operand (stream, XEXP (XEXP (x, 0), 0), 0);
-+	  fputs ("++", stream);
-+	  break;
-+	case PLUS:
-+	  {
-+	    rtx op0 = XEXP (XEXP (x, 0), 0);
-+	    rtx op1 = XEXP (XEXP (x, 0), 1);
-+	    rtx base = NULL_RTX, offset = NULL_RTX;
-+
-+	    if (avr32_address_register_rtx_p (op0, 1))
-+	      {
-+		base = op0;
-+		offset = op1;
-+	      }
-+	    else if (avr32_address_register_rtx_p (op1, 1))
-+	      {
-+		/* Operands are switched. */
-+		base = op1;
-+		offset = op0;
-+	      }
-+
-+	    gcc_assert (base && offset
-+			&& avr32_address_register_rtx_p (base, 1)
-+			&& avr32_legitimate_index_p (GET_MODE (x), offset,
-+						     1));
-+
-+	    avr32_print_operand (stream, base, 0);
-+	    fputs ("[", stream);
-+	    avr32_print_operand (stream, offset, 0);
-+	    fputs ("]", stream);
-+	    break;
-+	  }
-+	case CONST:
-+	  output_addr_const (stream, XEXP (XEXP (XEXP (x, 0), 0), 0));
-+	  fprintf (stream, " + %ld",
-+		   INTVAL (XEXP (XEXP (XEXP (x, 0), 0), 1)));
-+	  break;
-+	default:
-+	  error = 1;
-+	}
-+      break;
-+    case MULT:
-+      {
-+	int value = INTVAL (XEXP (x, 1));
-+
-+	/* Convert immediate in multiplication into a shift immediate */
-+	switch (value)
-+	  {
-+	  case 2:
-+	    value = 1;
-+	    break;
-+	  case 4:
-+	    value = 2;
-+	    break;
-+	  case 8:
-+	    value = 3;
-+	    break;
-+	  default:
-+	    value = 0;
-+	  }
-+	fprintf (stream, "%s << %i", reg_names[true_regnum (XEXP (x, 0))],
-+		 value);
-+	break;
-+      }
-+    case ASHIFT:
-+      if (GET_CODE (XEXP (x, 1)) == CONST_INT)
-+	fprintf (stream, "%s << %i", reg_names[true_regnum (XEXP (x, 0))],
-+		 (int) INTVAL (XEXP (x, 1)));
-+      else if (REG_P (XEXP (x, 1)))
-+	fprintf (stream, "%s << %s", reg_names[true_regnum (XEXP (x, 0))],
-+		 reg_names[true_regnum (XEXP (x, 1))]);
-+      else
-+	{
-+	  error = 1;
-+	}
-+      break;
-+    case LSHIFTRT:
-+      if (GET_CODE (XEXP (x, 1)) == CONST_INT)
-+	fprintf (stream, "%s >> %i", reg_names[true_regnum (XEXP (x, 0))],
-+		 (int) INTVAL (XEXP (x, 1)));
-+      else if (REG_P (XEXP (x, 1)))
-+	fprintf (stream, "%s >> %s", reg_names[true_regnum (XEXP (x, 0))],
-+		 reg_names[true_regnum (XEXP (x, 1))]);
-+      else
-+	{
-+	  error = 1;
-+	}
-+      fprintf (stream, ">>");
-+      break;
-+    case PARALLEL:
-+      {
-+	/* Load store multiple */
-+	int i;
-+	int count = XVECLEN (x, 0);
-+	int reglist16 = 0;
-+	char reglist16_string[100];
-+
-+	for (i = 0; i < count; ++i)
-+	  {
-+	    rtx vec_elm = XVECEXP (x, 0, i);
-+	    if (GET_MODE (vec_elm) != SET)
-+	      {
-+		debug_rtx (vec_elm);
-+		internal_error ("Unknown element in parallel expression!");
-+	      }
-+	    if (GET_MODE (XEXP (vec_elm, 0)) == REG)
-+	      {
-+		/* Load multiple */
-+		reglist16 |= 1 << ASM_REGNUM (REGNO (XEXP (vec_elm, 0)));
-+	      }
-+	    else
-+	      {
-+		/* Store multiple */
-+		reglist16 |= 1 << ASM_REGNUM (REGNO (XEXP (vec_elm, 1)));
-+	      }
-+	  }
-+
-+	avr32_make_reglist16 (reglist16, reglist16_string);
-+	fputs (reglist16_string, stream);
-+
-+	break;
-+      }
-+
-+    default:
-+      error = 1;
-+    }
-+
-+  if (error)
-+    {
-+      debug_rtx (x);
-+      internal_error ("Illegal expression for avr32_print_operand");
-+    }
-+}
-+
-+rtx
-+avr32_get_note_reg_equiv (rtx insn)
-+{
-+  rtx note;
-+
-+  note = find_reg_note (insn, REG_EQUIV, NULL_RTX);
-+
-+  if (note != NULL_RTX)
-+    return XEXP (note, 0);
-+  else
-+    return NULL_RTX;
-+}
-+
-+/*
-+  Outputs to stdio stream stream the assembler syntax for an instruction
-+  operand that is a memory reference whose address is x. x is an RTL
-+  expression.
-+
-+  ToDo: fixme.
-+*/
-+void
-+avr32_print_operand_address (FILE * stream, rtx x)
-+{
-+  fprintf (stream, "(%d) /* address */", REGNO (x));
-+}
-+
-+/* Return true if _GLOBAL_OFFSET_TABLE_ symbol is mentioned.  */
-+bool
-+avr32_got_mentioned_p (rtx addr)
-+{
-+  if (GET_CODE (addr) == MEM)
-+    addr = XEXP (addr, 0);
-+  while (GET_CODE (addr) == CONST)
-+    addr = XEXP (addr, 0);
-+  if (GET_CODE (addr) == SYMBOL_REF)
-+    {
-+      return streq (XSTR (addr, 0), "_GLOBAL_OFFSET_TABLE_");
-+    }
-+  if (GET_CODE (addr) == PLUS || GET_CODE (addr) == MINUS)
-+    {
-+      bool l1, l2;
-+
-+      l1 = avr32_got_mentioned_p (XEXP (addr, 0));
-+      l2 = avr32_got_mentioned_p (XEXP (addr, 1));
-+      return l1 || l2;
-+    }
-+  return false;
-+}
-+
-+
-+/* Find the symbol in an address expression.  */
-+
-+rtx
-+avr32_find_symbol (rtx addr)
-+{
-+  if (GET_CODE (addr) == MEM)
-+    addr = XEXP (addr, 0);
-+
-+  while (GET_CODE (addr) == CONST)
-+    addr = XEXP (addr, 0);
-+
-+  if (GET_CODE (addr) == SYMBOL_REF || GET_CODE (addr) == LABEL_REF)
-+    return addr;
-+  if (GET_CODE (addr) == PLUS)
-+    {
-+      rtx l1, l2;
-+
-+      l1 = avr32_find_symbol (XEXP (addr, 0));
-+      l2 = avr32_find_symbol (XEXP (addr, 1));
-+      if (l1 != NULL_RTX && l2 == NULL_RTX)
-+	return l1;
-+      else if (l1 == NULL_RTX && l2 != NULL_RTX)
-+	return l2;
-+    }
-+
-+  return NULL_RTX;
-+}
-+
-+
-+/* Routines for manipulation of the constant pool.  */
-+
-+/* AVR32 instructions cannot load a large constant directly into a
-+   register; they have to come from a pc relative load.  The constant
-+   must therefore be placed in the addressable range of the pc
-+   relative load.  Depending on the precise pc relative load
-+   instruction the range is somewhere between 256 bytes and 4k.  This
-+   means that we often have to dump a constant inside a function, and
-+   generate code to branch around it.
-+
-+   It is important to minimize this, since the branches will slow
-+   things down and make the code larger.
-+
-+   Normally we can hide the table after an existing unconditional
-+   branch so that there is no interruption of the flow, but in the
-+   worst case the code looks like this:
-+
-+	lddpc	rn, L1
-+	...
-+	rjmp	L2
-+	align
-+	L1:	.long value
-+	L2:
-+	...
-+
-+	lddpc	rn, L3
-+	...
-+	rjmp	L4
-+	align
-+	L3:	.long value
-+	L4:
-+	...
-+
-+   We fix this by performing a scan after scheduling, which notices
-+   which instructions need to have their operands fetched from the
-+   constant table and builds the table.
-+
-+   The algorithm starts by building a table of all the constants that
-+   need fixing up and all the natural barriers in the function (places
-+   where a constant table can be dropped without breaking the flow).
-+   For each fixup we note how far the pc-relative replacement will be
-+   able to reach and the offset of the instruction into the function.
-+
-+   Having built the table we then group the fixes together to form
-+   tables that are as large as possible (subject to addressing
-+   constraints) and emit each table of constants after the last
-+   barrier that is within range of all the instructions in the group.
-+   If a group does not contain a barrier, then we forcibly create one
-+   by inserting a jump instruction into the flow.  Once the table has
-+   been inserted, the insns are then modified to reference the
-+   relevant entry in the pool.
-+
-+   Possible enhancements to the algorithm (not implemented) are:
-+
-+   1) For some processors and object formats, there may be benefit in
-+   aligning the pools to the start of cache lines; this alignment
-+   would need to be taken into account when calculating addressability
-+   of a pool.  */
-+
-+/* These typedefs are located at the start of this file, so that
-+   they can be used in the prototypes there.  This comment is to
-+   remind readers of that fact so that the following structures
-+   can be understood more easily.
-+
-+     typedef struct minipool_node    Mnode;
-+     typedef struct minipool_fixup   Mfix;  */
-+
-+struct minipool_node
-+{
-+  /* Doubly linked chain of entries.  */
-+  Mnode *next;
-+  Mnode *prev;
-+  /* The maximum offset into the code that this entry can be placed.  While
-+     pushing fixes for forward references, all entries are sorted in order of
-+     increasing max_address.  */
-+  HOST_WIDE_INT max_address;
-+  /* Similarly for an entry inserted for a backwards ref.  */
-+  HOST_WIDE_INT min_address;
-+  /* The number of fixes referencing this entry.  This can become zero if we
-+     "unpush" an entry.  In this case we ignore the entry when we come to
-+     emit the code.  */
-+  int refcount;
-+  /* The offset from the start of the minipool.  */
-+  HOST_WIDE_INT offset;
-+  /* The value in table.  */
-+  rtx value;
-+  /* The mode of value.  */
-+  enum machine_mode mode;
-+  /* The size of the value.  */
-+  int fix_size;
-+};
-+
-+struct minipool_fixup
-+{
-+  Mfix *next;
-+  rtx insn;
-+  HOST_WIDE_INT address;
-+  rtx *loc;
-+  enum machine_mode mode;
-+  int fix_size;
-+  rtx value;
-+  Mnode *minipool;
-+  HOST_WIDE_INT forwards;
-+  HOST_WIDE_INT backwards;
-+};
-+
-+
-+/* Fixes less than a word need padding out to a word boundary.  */
-+#define MINIPOOL_FIX_SIZE(mode, value)                          \
-+  (IS_FORCE_MINIPOOL(value) ? 0 :                               \
-+   (GET_MODE_SIZE ((mode)) >= 4 ? GET_MODE_SIZE ((mode)) : 4))
-+
-+#define IS_FORCE_MINIPOOL(x)                    \
-+  (GET_CODE(x) == UNSPEC &&                     \
-+   XINT(x, 1) == UNSPEC_FORCE_MINIPOOL)
-+
-+static Mnode *minipool_vector_head;
-+static Mnode *minipool_vector_tail;
-+
-+/* The linked list of all minipool fixes required for this function.  */
-+Mfix *minipool_fix_head;
-+Mfix *minipool_fix_tail;
-+/* The fix entry for the current minipool, once it has been placed.  */
-+Mfix *minipool_barrier;
-+
-+/* Determines if INSN is the start of a jump table.  Returns the end
-+   of the TABLE or NULL_RTX.  */
-+static rtx
-+is_jump_table (rtx insn)
-+{
-+  rtx table;
-+
-+  if (GET_CODE (insn) == JUMP_INSN
-+      && JUMP_LABEL (insn) != NULL
-+      && ((table = next_real_insn (JUMP_LABEL (insn)))
-+	  == next_real_insn (insn))
-+      && table != NULL
-+      && GET_CODE (table) == JUMP_INSN
-+      && (GET_CODE (PATTERN (table)) == ADDR_VEC
-+	  || GET_CODE (PATTERN (table)) == ADDR_DIFF_VEC))
-+    return table;
-+
-+  return NULL_RTX;
-+}
-+
-+static HOST_WIDE_INT
-+get_jump_table_size (rtx insn)
-+{
-+  /* ADDR_VECs only take room if read-only data does into the text section.  */
-+  if (JUMP_TABLES_IN_TEXT_SECTION
-+#if !defined(READONLY_DATA_SECTION) && !defined(READONLY_DATA_SECTION_ASM_OP)
-+      || 1
-+#endif
-+    )
-+    {
-+      rtx body = PATTERN (insn);
-+      int elt = GET_CODE (body) == ADDR_DIFF_VEC ? 1 : 0;
-+
-+      return GET_MODE_SIZE (GET_MODE (body)) * XVECLEN (body, elt);
-+    }
-+
-+  return 0;
-+}
-+
-+/* Move a minipool fix MP from its current location to before MAX_MP.
-+   If MAX_MP is NULL, then MP doesn't need moving, but the addressing
-+   constraints may need updating.  */
-+static Mnode *
-+move_minipool_fix_forward_ref (Mnode * mp, Mnode * max_mp,
-+			       HOST_WIDE_INT max_address)
-+{
-+  /* This should never be true and the code below assumes these are
-+     different.  */
-+  if (mp == max_mp)
-+    abort ();
-+
-+  if (max_mp == NULL)
-+    {
-+      if (max_address < mp->max_address)
-+	mp->max_address = max_address;
-+    }
-+  else
-+    {
-+      if (max_address > max_mp->max_address - mp->fix_size)
-+	mp->max_address = max_mp->max_address - mp->fix_size;
-+      else
-+	mp->max_address = max_address;
-+
-+      /* Unlink MP from its current position.  Since max_mp is non-null,
-+         mp->prev must be non-null.  */
-+      mp->prev->next = mp->next;
-+      if (mp->next != NULL)
-+	mp->next->prev = mp->prev;
-+      else
-+	minipool_vector_tail = mp->prev;
-+
-+      /* Re-insert it before MAX_MP.  */
-+      mp->next = max_mp;
-+      mp->prev = max_mp->prev;
-+      max_mp->prev = mp;
-+
-+      if (mp->prev != NULL)
-+	mp->prev->next = mp;
-+      else
-+	minipool_vector_head = mp;
-+    }
-+
-+  /* Save the new entry.  */
-+  max_mp = mp;
-+
-+  /* Scan over the preceding entries and adjust their addresses as required.
-+     */
-+  while (mp->prev != NULL
-+	 && mp->prev->max_address > mp->max_address - mp->prev->fix_size)
-+    {
-+      mp->prev->max_address = mp->max_address - mp->prev->fix_size;
-+      mp = mp->prev;
-+    }
-+
-+  return max_mp;
-+}
-+
-+/* Add a constant to the minipool for a forward reference.  Returns the
-+   node added or NULL if the constant will not fit in this pool.  */
-+static Mnode *
-+add_minipool_forward_ref (Mfix * fix)
-+{
-+  /* If set, max_mp is the first pool_entry that has a lower constraint than
-+     the one we are trying to add.  */
-+  Mnode *max_mp = NULL;
-+  HOST_WIDE_INT max_address = fix->address + fix->forwards;
-+  Mnode *mp;
-+
-+  /* If this fix's address is greater than the address of the first entry,
-+     then we can't put the fix in this pool.  We subtract the size of the
-+     current fix to ensure that if the table is fully packed we still have
-+     enough room to insert this value by suffling the other fixes forwards.  */
-+  if (minipool_vector_head &&
-+      fix->address >= minipool_vector_head->max_address - fix->fix_size)
-+    return NULL;
-+
-+  /* Scan the pool to see if a constant with the same value has already been
-+     added.  While we are doing this, also note the location where we must
-+     insert the constant if it doesn't already exist.  */
-+  for (mp = minipool_vector_head; mp != NULL; mp = mp->next)
-+    {
-+      if (GET_CODE (fix->value) == GET_CODE (mp->value)
-+	  && fix->mode == mp->mode
-+	  && (GET_CODE (fix->value) != CODE_LABEL
-+	      || (CODE_LABEL_NUMBER (fix->value)
-+		  == CODE_LABEL_NUMBER (mp->value)))
-+	  && rtx_equal_p (fix->value, mp->value))
-+	{
-+	  /* More than one fix references this entry.  */
-+	  mp->refcount++;
-+	  return move_minipool_fix_forward_ref (mp, max_mp, max_address);
-+	}
-+
-+      /* Note the insertion point if necessary.  */
-+      if (max_mp == NULL && mp->max_address > max_address)
-+	max_mp = mp;
-+
-+    }
-+
-+  /* The value is not currently in the minipool, so we need to create a new
-+     entry for it.  If MAX_MP is NULL, the entry will be put on the end of
-+     the list since the placement is less constrained than any existing
-+     entry.  Otherwise, we insert the new fix before MAX_MP and, if
-+     necessary, adjust the constraints on the other entries.  */
-+  mp = xmalloc (sizeof (*mp));
-+  mp->fix_size = fix->fix_size;
-+  mp->mode = fix->mode;
-+  mp->value = fix->value;
-+  mp->refcount = 1;
-+  /* Not yet required for a backwards ref.  */
-+  mp->min_address = -65536;
-+
-+  if (max_mp == NULL)
-+    {
-+      mp->max_address = max_address;
-+      mp->next = NULL;
-+      mp->prev = minipool_vector_tail;
-+
-+      if (mp->prev == NULL)
-+	{
-+	  minipool_vector_head = mp;
-+	  minipool_vector_label = gen_label_rtx ();
-+	}
-+      else
-+	mp->prev->next = mp;
-+
-+      minipool_vector_tail = mp;
-+    }
-+  else
-+    {
-+      if (max_address > max_mp->max_address - mp->fix_size)
-+	mp->max_address = max_mp->max_address - mp->fix_size;
-+      else
-+	mp->max_address = max_address;
-+
-+      mp->next = max_mp;
-+      mp->prev = max_mp->prev;
-+      max_mp->prev = mp;
-+      if (mp->prev != NULL)
-+	mp->prev->next = mp;
-+      else
-+	minipool_vector_head = mp;
-+    }
-+
-+  /* Save the new entry.  */
-+  max_mp = mp;
-+
-+  /* Scan over the preceding entries and adjust their addresses as required.
-+     */
-+  while (mp->prev != NULL
-+	 && mp->prev->max_address > mp->max_address - mp->prev->fix_size)
-+    {
-+      mp->prev->max_address = mp->max_address - mp->prev->fix_size;
-+      mp = mp->prev;
-+    }
-+
-+  return max_mp;
-+}
-+
-+static Mnode *
-+move_minipool_fix_backward_ref (Mnode * mp, Mnode * min_mp,
-+				HOST_WIDE_INT min_address)
-+{
-+  HOST_WIDE_INT offset;
-+
-+  /* This should never be true, and the code below assumes these are
-+     different.  */
-+  if (mp == min_mp)
-+    abort ();
-+
-+  if (min_mp == NULL)
-+    {
-+      if (min_address > mp->min_address)
-+	mp->min_address = min_address;
-+    }
-+  else
-+    {
-+      /* We will adjust this below if it is too loose.  */
-+      mp->min_address = min_address;
-+
-+      /* Unlink MP from its current position.  Since min_mp is non-null,
-+         mp->next must be non-null.  */
-+      mp->next->prev = mp->prev;
-+      if (mp->prev != NULL)
-+	mp->prev->next = mp->next;
-+      else
-+	minipool_vector_head = mp->next;
-+
-+      /* Reinsert it after MIN_MP.  */
-+      mp->prev = min_mp;
-+      mp->next = min_mp->next;
-+      min_mp->next = mp;
-+      if (mp->next != NULL)
-+	mp->next->prev = mp;
-+      else
-+	minipool_vector_tail = mp;
-+    }
-+
-+  min_mp = mp;
-+
-+  offset = 0;
-+  for (mp = minipool_vector_head; mp != NULL; mp = mp->next)
-+    {
-+      mp->offset = offset;
-+      if (mp->refcount > 0)
-+	offset += mp->fix_size;
-+
-+      if (mp->next && mp->next->min_address < mp->min_address + mp->fix_size)
-+	mp->next->min_address = mp->min_address + mp->fix_size;
-+    }
-+
-+  return min_mp;
-+}
-+
-+/* Add a constant to the minipool for a backward reference.  Returns the
-+   node added or NULL if the constant will not fit in this pool.
-+
-+   Note that the code for insertion for a backwards reference can be
-+   somewhat confusing because the calculated offsets for each fix do
-+   not take into account the size of the pool (which is still under
-+   construction.  */
-+static Mnode *
-+add_minipool_backward_ref (Mfix * fix)
-+{
-+  /* If set, min_mp is the last pool_entry that has a lower constraint than
-+     the one we are trying to add.  */
-+  Mnode *min_mp = NULL;
-+  /* This can be negative, since it is only a constraint.  */
-+  HOST_WIDE_INT min_address = fix->address - fix->backwards;
-+  Mnode *mp;
-+
-+  /* If we can't reach the current pool from this insn, or if we can't insert
-+     this entry at the end of the pool without pushing other fixes out of
-+     range, then we don't try.  This ensures that we can't fail later on.  */
-+  if (min_address >= minipool_barrier->address
-+      || (minipool_vector_tail->min_address + fix->fix_size
-+	  >= minipool_barrier->address))
-+    return NULL;
-+
-+  /* Scan the pool to see if a constant with the same value has already been
-+     added.  While we are doing this, also note the location where we must
-+     insert the constant if it doesn't already exist.  */
-+  for (mp = minipool_vector_tail; mp != NULL; mp = mp->prev)
-+    {
-+      if (GET_CODE (fix->value) == GET_CODE (mp->value)
-+	  && fix->mode == mp->mode
-+	  && (GET_CODE (fix->value) != CODE_LABEL
-+	      || (CODE_LABEL_NUMBER (fix->value)
-+		  == CODE_LABEL_NUMBER (mp->value)))
-+	  && rtx_equal_p (fix->value, mp->value)
-+	  /* Check that there is enough slack to move this entry to the end
-+	     of the table (this is conservative).  */
-+	  && (mp->max_address
-+	      > (minipool_barrier->address
-+		 + minipool_vector_tail->offset
-+		 + minipool_vector_tail->fix_size)))
-+	{
-+	  mp->refcount++;
-+	  return move_minipool_fix_backward_ref (mp, min_mp, min_address);
-+	}
-+
-+      if (min_mp != NULL)
-+	mp->min_address += fix->fix_size;
-+      else
-+	{
-+	  /* Note the insertion point if necessary.  */
-+	  if (mp->min_address < min_address)
-+	    {
-+	      min_mp = mp;
-+	    }
-+	  else if (mp->max_address
-+		   < minipool_barrier->address + mp->offset + fix->fix_size)
-+	    {
-+	      /* Inserting before this entry would push the fix beyond its
-+	         maximum address (which can happen if we have re-located a
-+	         forwards fix); force the new fix to come after it.  */
-+	      min_mp = mp;
-+	      min_address = mp->min_address + fix->fix_size;
-+	    }
-+	}
-+    }
-+
-+  /* We need to create a new entry.  */
-+  mp = xmalloc (sizeof (*mp));
-+  mp->fix_size = fix->fix_size;
-+  mp->mode = fix->mode;
-+  mp->value = fix->value;
-+  mp->refcount = 1;
-+  mp->max_address = minipool_barrier->address + 65536;
-+
-+  mp->min_address = min_address;
-+
-+  if (min_mp == NULL)
-+    {
-+      mp->prev = NULL;
-+      mp->next = minipool_vector_head;
-+
-+      if (mp->next == NULL)
-+	{
-+	  minipool_vector_tail = mp;
-+	  minipool_vector_label = gen_label_rtx ();
-+	}
-+      else
-+	mp->next->prev = mp;
-+
-+      minipool_vector_head = mp;
-+    }
-+  else
-+    {
-+      mp->next = min_mp->next;
-+      mp->prev = min_mp;
-+      min_mp->next = mp;
-+
-+      if (mp->next != NULL)
-+	mp->next->prev = mp;
-+      else
-+	minipool_vector_tail = mp;
-+    }
-+
-+  /* Save the new entry.  */
-+  min_mp = mp;
-+
-+  if (mp->prev)
-+    mp = mp->prev;
-+  else
-+    mp->offset = 0;
-+
-+  /* Scan over the following entries and adjust their offsets.  */
-+  while (mp->next != NULL)
-+    {
-+      if (mp->next->min_address < mp->min_address + mp->fix_size)
-+	mp->next->min_address = mp->min_address + mp->fix_size;
-+
-+      if (mp->refcount)
-+	mp->next->offset = mp->offset + mp->fix_size;
-+      else
-+	mp->next->offset = mp->offset;
-+
-+      mp = mp->next;
-+    }
-+
-+  return min_mp;
-+}
-+
-+static void
-+assign_minipool_offsets (Mfix * barrier)
-+{
-+  HOST_WIDE_INT offset = 0;
-+  Mnode *mp;
-+
-+  minipool_barrier = barrier;
-+
-+  for (mp = minipool_vector_head; mp != NULL; mp = mp->next)
-+    {
-+      mp->offset = offset;
-+
-+      if (mp->refcount > 0)
-+	offset += mp->fix_size;
-+    }
-+}
-+
-+/* Print a symbolic form of X to the debug file, F.  */
-+static void
-+avr32_print_value (FILE * f, rtx x)
-+{
-+  switch (GET_CODE (x))
-+    {
-+    case CONST_INT:
-+      fprintf (f, "0x%x", (int) INTVAL (x));
-+      return;
-+
-+    case CONST_DOUBLE:
-+      fprintf (f, "<0x%lx,0x%lx>", (long) XWINT (x, 2), (long) XWINT (x, 3));
-+      return;
-+
-+    case CONST_VECTOR:
-+      {
-+	int i;
-+
-+	fprintf (f, "<");
-+	for (i = 0; i < CONST_VECTOR_NUNITS (x); i++)
-+	  {
-+	    fprintf (f, "0x%x", (int) INTVAL (CONST_VECTOR_ELT (x, i)));
-+	    if (i < (CONST_VECTOR_NUNITS (x) - 1))
-+	      fputc (',', f);
-+	  }
-+	fprintf (f, ">");
-+      }
-+      return;
-+
-+    case CONST_STRING:
-+      fprintf (f, "\"%s\"", XSTR (x, 0));
-+      return;
-+
-+    case SYMBOL_REF:
-+      fprintf (f, "`%s'", XSTR (x, 0));
-+      return;
-+
-+    case LABEL_REF:
-+      fprintf (f, "L%d", INSN_UID (XEXP (x, 0)));
-+      return;
-+
-+    case CONST:
-+      avr32_print_value (f, XEXP (x, 0));
-+      return;
-+
-+    case PLUS:
-+      avr32_print_value (f, XEXP (x, 0));
-+      fprintf (f, "+");
-+      avr32_print_value (f, XEXP (x, 1));
-+      return;
-+
-+    case PC:
-+      fprintf (f, "pc");
-+      return;
-+
-+    default:
-+      fprintf (f, "????");
-+      return;
-+    }
-+}
-+
-+int
-+is_minipool_label (rtx label)
-+{
-+  minipool_labels *cur_mp_label = cfun->machine->minipool_label_head;
-+
-+  if (GET_CODE (label) != CODE_LABEL)
-+    return FALSE;
-+
-+  while (cur_mp_label)
-+    {
-+      if (CODE_LABEL_NUMBER (label)
-+	  == CODE_LABEL_NUMBER (cur_mp_label->label))
-+	return TRUE;
-+      cur_mp_label = cur_mp_label->next;
-+    }
-+  return FALSE;
-+}
-+
-+static void
-+new_minipool_label (rtx label)
-+{
-+  if (!cfun->machine->minipool_label_head)
-+    {
-+      cfun->machine->minipool_label_head =
-+	ggc_alloc (sizeof (minipool_labels));
-+      cfun->machine->minipool_label_tail = cfun->machine->minipool_label_head;
-+      cfun->machine->minipool_label_head->label = label;
-+      cfun->machine->minipool_label_head->next = 0;
-+      cfun->machine->minipool_label_head->prev = 0;
-+    }
-+  else
-+    {
-+      cfun->machine->minipool_label_tail->next =
-+	ggc_alloc (sizeof (minipool_labels));
-+      cfun->machine->minipool_label_tail->next->label = label;
-+      cfun->machine->minipool_label_tail->next->next = 0;
-+      cfun->machine->minipool_label_tail->next->prev =
-+	cfun->machine->minipool_label_tail;
-+      cfun->machine->minipool_label_tail =
-+	cfun->machine->minipool_label_tail->next;
-+    }
-+}
-+
-+/* Output the literal table */
-+static void
-+dump_minipool (rtx scan)
-+{
-+  Mnode *mp;
-+  Mnode *nmp;
-+
-+  if (dump_file)
-+    fprintf (dump_file,
-+	     ";; Emitting minipool after insn %u; address %ld; align %d (bytes)\n",
-+	     INSN_UID (scan), (unsigned long) minipool_barrier->address, 4);
-+
-+  scan = emit_insn_after (gen_consttable_start (), scan);
-+  scan = emit_insn_after (gen_align_4 (), scan);
-+  scan = emit_label_after (minipool_vector_label, scan);
-+  new_minipool_label (minipool_vector_label);
-+
-+  for (mp = minipool_vector_head; mp != NULL; mp = nmp)
-+    {
-+      if (mp->refcount > 0)
-+	{
-+	  if (dump_file)
-+	    {
-+	      fprintf (dump_file,
-+		       ";;  Offset %u, min %ld, max %ld ",
-+		       (unsigned) mp->offset, (unsigned long) mp->min_address,
-+		       (unsigned long) mp->max_address);
-+	      avr32_print_value (dump_file, mp->value);
-+	      fputc ('\n', dump_file);
-+	    }
-+
-+	  switch (mp->fix_size)
-+	    {
-+#ifdef HAVE_consttable_4
-+	    case 4:
-+	      scan = emit_insn_after (gen_consttable_4 (mp->value), scan);
-+	      break;
-+
-+#endif
-+#ifdef HAVE_consttable_8
-+	    case 8:
-+	      scan = emit_insn_after (gen_consttable_8 (mp->value), scan);
-+	      break;
-+
-+#endif
-+	    case 0:
-+	      /* This can happen for force-minipool entries which just are
-+	         there to force the minipool to be generate. */
-+	      break;
-+	    default:
-+	      abort ();
-+	      break;
-+	    }
-+	}
-+
-+      nmp = mp->next;
-+      free (mp);
-+    }
-+
-+  minipool_vector_head = minipool_vector_tail = NULL;
-+  scan = emit_insn_after (gen_consttable_end (), scan);
-+  scan = emit_barrier_after (scan);
-+}
-+
-+/* Return the cost of forcibly inserting a barrier after INSN.  */
-+static int
-+avr32_barrier_cost (rtx insn)
-+{
-+  /* Basing the location of the pool on the loop depth is preferable, but at
-+     the moment, the basic block information seems to be corrupt by this
-+     stage of the compilation.  */
-+  int base_cost = 50;
-+  rtx next = next_nonnote_insn (insn);
-+
-+  if (next != NULL && GET_CODE (next) == CODE_LABEL)
-+    base_cost -= 20;
-+
-+  switch (GET_CODE (insn))
-+    {
-+    case CODE_LABEL:
-+      /* It will always be better to place the table before the label, rather
-+         than after it.  */
-+      return 50;
-+
-+    case INSN:
-+    case CALL_INSN:
-+      return base_cost;
-+
-+    case JUMP_INSN:
-+      return base_cost - 10;
-+
-+    default:
-+      return base_cost + 10;
-+    }
-+}
-+
-+/* Find the best place in the insn stream in the range
-+   (FIX->address,MAX_ADDRESS) to forcibly insert a minipool barrier.
-+   Create the barrier by inserting a jump and add a new fix entry for
-+   it.  */
-+static Mfix *
-+create_fix_barrier (Mfix * fix, HOST_WIDE_INT max_address)
-+{
-+  HOST_WIDE_INT count = 0;
-+  rtx barrier;
-+  rtx from = fix->insn;
-+  rtx selected = from;
-+  int selected_cost;
-+  HOST_WIDE_INT selected_address;
-+  Mfix *new_fix;
-+  HOST_WIDE_INT max_count = max_address - fix->address;
-+  rtx label = gen_label_rtx ();
-+
-+  selected_cost = avr32_barrier_cost (from);
-+  selected_address = fix->address;
-+
-+  while (from && count < max_count)
-+    {
-+      rtx tmp;
-+      int new_cost;
-+
-+      /* This code shouldn't have been called if there was a natural barrier
-+         within range.  */
-+      if (GET_CODE (from) == BARRIER)
-+	abort ();
-+
-+      /* Count the length of this insn.  */
-+      count += get_attr_length (from);
-+
-+      /* If there is a jump table, add its length.  */
-+      tmp = is_jump_table (from);
-+      if (tmp != NULL)
-+	{
-+	  count += get_jump_table_size (tmp);
-+
-+	  /* Jump tables aren't in a basic block, so base the cost on the
-+	     dispatch insn.  If we select this location, we will still put
-+	     the pool after the table.  */
-+	  new_cost = avr32_barrier_cost (from);
-+
-+	  if (count < max_count && new_cost <= selected_cost)
-+	    {
-+	      selected = tmp;
-+	      selected_cost = new_cost;
-+	      selected_address = fix->address + count;
-+	    }
-+
-+	  /* Continue after the dispatch table.  */
-+	  from = NEXT_INSN (tmp);
-+	  continue;
-+	}
-+
-+      new_cost = avr32_barrier_cost (from);
-+
-+      if (count < max_count && new_cost <= selected_cost)
-+	{
-+	  selected = from;
-+	  selected_cost = new_cost;
-+	  selected_address = fix->address + count;
-+	}
-+
-+      from = NEXT_INSN (from);
-+    }
-+
-+  /* Create a new JUMP_INSN that branches around a barrier.  */
-+  from = emit_jump_insn_after (gen_jump (label), selected);
-+  JUMP_LABEL (from) = label;
-+  barrier = emit_barrier_after (from);
-+  emit_label_after (label, barrier);
-+
-+  /* Create a minipool barrier entry for the new barrier.  */
-+  new_fix = (Mfix *) obstack_alloc (&minipool_obstack, sizeof (*new_fix));
-+  new_fix->insn = barrier;
-+  new_fix->address = selected_address;
-+  new_fix->next = fix->next;
-+  fix->next = new_fix;
-+
-+  return new_fix;
-+}
-+
-+/* Record that there is a natural barrier in the insn stream at
-+   ADDRESS.  */
-+static void
-+push_minipool_barrier (rtx insn, HOST_WIDE_INT address)
-+{
-+  Mfix *fix = (Mfix *) obstack_alloc (&minipool_obstack, sizeof (*fix));
-+
-+  fix->insn = insn;
-+  fix->address = address;
-+
-+  fix->next = NULL;
-+  if (minipool_fix_head != NULL)
-+    minipool_fix_tail->next = fix;
-+  else
-+    minipool_fix_head = fix;
-+
-+  minipool_fix_tail = fix;
-+}
-+
-+/* Record INSN, which will need fixing up to load a value from the
-+   minipool.  ADDRESS is the offset of the insn since the start of the
-+   function; LOC is a pointer to the part of the insn which requires
-+   fixing; VALUE is the constant that must be loaded, which is of type
-+   MODE.  */
-+static void
-+push_minipool_fix (rtx insn, HOST_WIDE_INT address, rtx * loc,
-+		   enum machine_mode mode, rtx value)
-+{
-+  Mfix *fix = (Mfix *) obstack_alloc (&minipool_obstack, sizeof (*fix));
-+  rtx body = PATTERN (insn);
-+
-+  fix->insn = insn;
-+  fix->address = address;
-+  fix->loc = loc;
-+  fix->mode = mode;
-+  fix->fix_size = MINIPOOL_FIX_SIZE (mode, value);
-+  fix->value = value;
-+
-+  if (GET_CODE (body) == PARALLEL)
-+    {
-+      /* Mcall : Ks16 << 2 */
-+      fix->forwards = ((1 << 15) - 1) << 2;
-+      fix->backwards = (1 << 15) << 2;
-+    }
-+  else if (GET_CODE (body) == SET
-+	   && GET_MODE_SIZE (GET_MODE (SET_DEST (body))) == 4)
-+    {
-+      /* Word Load */
-+      if (TARGET_HARD_FLOAT
-+	  && GET_MODE_CLASS (GET_MODE (SET_DEST (body))) == MODE_FLOAT)
-+	{
-+	  /* Ldc0.w : Ku12 << 2 */
-+	  fix->forwards = ((1 << 12) - 1) << 2;
-+	  fix->backwards = 0;
-+	}
-+      else
-+	{
-+	  if (optimize_size)
-+	    {
-+	      /* Lddpc : Ku7 << 2 */
-+	      fix->forwards = ((1 << 7) - 1) << 2;
-+	      fix->backwards = 0;
-+	    }
-+	  else
-+	    {
-+	      /* Ld.w : Ks16 */
-+	      fix->forwards = ((1 << 15) - 4);
-+	      fix->backwards = (1 << 15);
-+	    }
-+	}
-+    }
-+  else if (GET_CODE (body) == SET
-+	   && GET_MODE_SIZE (GET_MODE (SET_DEST (body))) == 8)
-+    {
-+      /* Double word load */
-+      if (TARGET_HARD_FLOAT
-+	  && GET_MODE_CLASS (GET_MODE (SET_DEST (body))) == MODE_FLOAT)
-+	{
-+	  /* Ldc0.d : Ku12 << 2 */
-+	  fix->forwards = ((1 << 12) - 1) << 2;
-+	  fix->backwards = 0;
-+	}
-+      else
-+	{
-+	  /* Ld.d : Ks16 */
-+	  fix->forwards = ((1 << 15) - 4);
-+	  fix->backwards = (1 << 15);
-+	}
-+    }
-+  else if (GET_CODE (body) == UNSPEC_VOLATILE
-+	   && XINT (body, 1) == VUNSPEC_MVRC)
-+    {
-+      /* Coprocessor load */
-+      /* Ldc : Ku8 << 2 */
-+      fix->forwards = ((1 << 8) - 1) << 2;
-+      fix->backwards = 0;
-+    }
-+  else
-+    {
-+      /* Assume worst case which is lddpc insn. */
-+      fix->forwards = ((1 << 7) - 1) << 2;
-+      fix->backwards = 0;
-+    }
-+
-+  fix->minipool = NULL;
-+
-+  /* If an insn doesn't have a range defined for it, then it isn't expecting
-+     to be reworked by this code.  Better to abort now than to generate duff
-+     assembly code.  */
-+  if (fix->forwards == 0 && fix->backwards == 0)
-+    abort ();
-+
-+  if (dump_file)
-+    {
-+      fprintf (dump_file,
-+	       ";; %smode fixup for i%d; addr %lu, range (%ld,%ld): ",
-+	       GET_MODE_NAME (mode),
-+	       INSN_UID (insn), (unsigned long) address,
-+	       -1 * (long) fix->backwards, (long) fix->forwards);
-+      avr32_print_value (dump_file, fix->value);
-+      fprintf (dump_file, "\n");
-+    }
-+
-+  /* Add it to the chain of fixes.  */
-+  fix->next = NULL;
-+
-+  if (minipool_fix_head != NULL)
-+    minipool_fix_tail->next = fix;
-+  else
-+    minipool_fix_head = fix;
-+
-+  minipool_fix_tail = fix;
-+}
-+
-+/* Scan INSN and note any of its operands that need fixing.
-+   If DO_PUSHES is false we do not actually push any of the fixups
-+   needed.  The function returns TRUE is any fixups were needed/pushed.
-+   This is used by avr32_memory_load_p() which needs to know about loads
-+   of constants that will be converted into minipool loads.  */
-+static bool
-+note_invalid_constants (rtx insn, HOST_WIDE_INT address, int do_pushes)
-+{
-+  bool result = false;
-+  int opno;
-+
-+  extract_insn (insn);
-+
-+  if (!constrain_operands (1))
-+    fatal_insn_not_found (insn);
-+
-+  if (recog_data.n_alternatives == 0)
-+    return false;
-+
-+  /* Fill in recog_op_alt with information about the constraints of this
-+     insn.  */
-+  preprocess_constraints ();
-+
-+  for (opno = 0; opno < recog_data.n_operands; opno++)
-+    {
-+      rtx op;
-+
-+      /* Things we need to fix can only occur in inputs.  */
-+      if (recog_data.operand_type[opno] != OP_IN)
-+	continue;
-+
-+      op = recog_data.operand[opno];
-+
-+      if (avr32_const_pool_ref_operand (op, GET_MODE (op)))
-+	{
-+	  if (do_pushes)
-+	    {
-+	      rtx cop = avoid_constant_pool_reference (op);
-+
-+	      /* Casting the address of something to a mode narrower than a
-+	         word can cause avoid_constant_pool_reference() to return the
-+	         pool reference itself.  That's no good to us here.  Lets
-+	         just hope that we can use the constant pool value directly.
-+	         */
-+	      if (op == cop)
-+		cop = get_pool_constant (XEXP (op, 0));
-+
-+	      push_minipool_fix (insn, address,
-+				 recog_data.operand_loc[opno],
-+				 recog_data.operand_mode[opno], cop);
-+	    }
-+
-+	  result = true;
-+	}
-+      else if (TARGET_HAS_ASM_ADDR_PSEUDOS
-+	       && avr32_address_operand (op, GET_MODE (op)))
-+	{
-+	  /* Handle pseudo instructions using a direct address. These pseudo
-+	     instructions might need entries in the constant pool and we must
-+	     therefor create a constant pool for them, in case the
-+	     assembler/linker needs to insert entries. */
-+	  if (do_pushes)
-+	    {
-+	      /* Push a dummy constant pool entry so that the .cpool
-+	         directive should be inserted on the appropriate place in the
-+	         code even if there are no real constant pool entries. This
-+	         is used by the assembler and linker to know where to put
-+	         generated constant pool entries. */
-+	      push_minipool_fix (insn, address,
-+				 recog_data.operand_loc[opno],
-+				 recog_data.operand_mode[opno],
-+				 gen_rtx_UNSPEC (VOIDmode,
-+						 gen_rtvec (1, const0_rtx),
-+						 UNSPEC_FORCE_MINIPOOL));
-+	      result = true;
-+	    }
-+	}
-+    }
-+  return result;
-+}
-+
-+
-+static int
-+avr32_insn_is_cast (rtx insn)
-+{
-+
-+  if (NONJUMP_INSN_P (insn)
-+      && GET_CODE (PATTERN (insn)) == SET
-+      && (GET_CODE (SET_SRC (PATTERN (insn))) == ZERO_EXTEND
-+	  || GET_CODE (SET_SRC (PATTERN (insn))) == SIGN_EXTEND)
-+      && REG_P (XEXP (SET_SRC (PATTERN (insn)), 0))
-+      && REG_P (SET_DEST (PATTERN (insn))))
-+    return true;
-+  return false;
-+}
-+
-+/* FIXME: The level of nesting in this function is way too deep. It needs to be
-+   torn apart.  */
-+static void
-+avr32_reorg_optimization (void)
-+{
-+  rtx first = get_insns ();
-+  rtx insn;
-+
-+  if (TARGET_MD_REORG_OPTIMIZATION && (optimize_size || (optimize > 0)))
-+    {
-+
-+      /* Scan through all insns looking for cast operations. */
-+      if (dump_file)
-+	{
-+	  fprintf (dump_file, ";; Deleting redundant cast operations:\n");
-+	}
-+      for (insn = first; insn; insn = NEXT_INSN (insn))
-+	{
-+	  rtx reg, src_reg, scan;
-+	  enum machine_mode mode;
-+	  int unused_cast;
-+	  rtx label_ref;
-+
-+	  if (avr32_insn_is_cast (insn)
-+	      && (GET_MODE (XEXP (SET_SRC (PATTERN (insn)), 0)) == QImode
-+		  || GET_MODE (XEXP (SET_SRC (PATTERN (insn)), 0)) == HImode))
-+	    {
-+	      mode = GET_MODE (XEXP (SET_SRC (PATTERN (insn)), 0));
-+	      reg = SET_DEST (PATTERN (insn));
-+	      src_reg = XEXP (SET_SRC (PATTERN (insn)), 0);
-+	    }
-+	  else
-+	    {
-+	      continue;
-+	    }
-+
-+	  unused_cast = false;
-+	  label_ref = NULL_RTX;
-+	  for (scan = NEXT_INSN (insn); scan; scan = NEXT_INSN (scan))
-+	    {
-+	      /* Check if we have reached the destination of a simple
-+	         conditional jump which we have already scanned past. If so,
-+	         we can safely continue scanning. */
-+	      if (LABEL_P (scan) && label_ref != NULL_RTX)
-+		{
-+		  if (CODE_LABEL_NUMBER (scan) ==
-+		      CODE_LABEL_NUMBER (XEXP (label_ref, 0)))
-+		    label_ref = NULL_RTX;
-+		  else
-+		    break;
-+		}
-+
-+	      if (!INSN_P (scan))
-+		continue;
-+
-+	      /* For conditional jumps we can manage to keep on scanning if
-+	         we meet the destination label later on before any new jump
-+	         insns occure. */
-+	      if (GET_CODE (scan) == JUMP_INSN)
-+		{
-+		  if (any_condjump_p (scan) && label_ref == NULL_RTX)
-+		    label_ref = condjump_label (scan);
-+		  else
-+		    break;
-+		}
-+
-+	      if (!reg_mentioned_p (reg, PATTERN (scan)))
-+		continue;
-+
-+	      /* Check if casted register is used in this insn */
-+	      if ((regno_use_in (REGNO (reg), PATTERN (scan)) != NULL_RTX)
-+		  && (GET_MODE (regno_use_in (REGNO (reg), PATTERN (scan))) ==
-+		      GET_MODE (reg)))
-+		{
-+		  /* If not used in the source to the set or in a memory
-+		     expression in the destiantion then the register is used
-+		     as a destination and is really dead. */
-+		  if (single_set (scan)
-+		      && GET_CODE (PATTERN (scan)) == SET
-+		      && REG_P (SET_DEST (PATTERN (scan)))
-+		      && !regno_use_in (REGNO (reg), SET_SRC (PATTERN (scan)))
-+		      && label_ref == NULL_RTX)
-+		    {
-+		      unused_cast = true;
-+		    }
-+		  break;
-+		}
-+
-+	      /* Check if register is dead or set in this insn */
-+	      if (dead_or_set_p (scan, reg))
-+		{
-+		  unused_cast = true;
-+		  break;
-+		}
-+	    }
-+
-+	  /* Check if we have unresolved conditional jumps */
-+	  if (label_ref != NULL_RTX)
-+	    continue;
-+
-+	  if (unused_cast)
-+	    {
-+	      if (REGNO (reg) == REGNO (XEXP (SET_SRC (PATTERN (insn)), 0)))
-+		{
-+		  /* One operand cast, safe to delete */
-+		  if (dump_file)
-+		    {
-+		      fprintf (dump_file,
-+			       ";;  INSN %i removed, casted register %i value not used.\n",
-+			       INSN_UID (insn), REGNO (reg));
-+		    }
-+		  SET_INSN_DELETED (insn);
-+		  /* Force the instruction to be recognized again */
-+		  INSN_CODE (insn) = -1;
-+		}
-+	      else
-+		{
-+		  /* Two operand cast, which really could be substituted with
-+		     a move, if the source register is dead after the cast
-+		     insn and then the insn which sets the source register
-+		     could instead directly set the destination register for
-+		     the cast. As long as there are no insns in between which
-+		     uses the register. */
-+		  rtx link = NULL_RTX;
-+		  rtx set;
-+		  rtx src_reg = XEXP (SET_SRC (PATTERN (insn)), 0);
-+		  unused_cast = false;
-+
-+		  if (!find_reg_note (insn, REG_DEAD, src_reg))
-+		    continue;
-+
-+		  /* Search for the insn which sets the source register */
-+		  for (link = LOG_LINKS (insn); link; link = XEXP (link, 1))
-+		    {
-+		      if (REG_NOTE_KIND (link) != 0)
-+			continue;
-+		      set = single_set (XEXP (link, 0));
-+		      if (set && rtx_equal_p (src_reg, SET_DEST (set)))
-+			{
-+			  link = XEXP (link, 0);
-+			  break;
-+			}
-+		    }
-+
-+		  /* Found no link or link is a call insn where we can not
-+		     change the destination register */
-+		  if (link == NULL_RTX || CALL_P (link))
-+		    continue;
-+
-+		  /* Scan through all insn between link and insn */
-+		  for (scan = NEXT_INSN (link); scan; scan = NEXT_INSN (scan))
-+		    {
-+		      /* Don't try to trace forward past a CODE_LABEL if we
-+		         haven't seen INSN yet.  Ordinarily, we will only
-+		         find the setting insn in LOG_LINKS if it is in the
-+		         same basic block.  However, cross-jumping can insert
-+		         code labels in between the load and the call, and
-+		         can result in situations where a single call insn
-+		         may have two targets depending on where we came
-+		         from.  */
-+
-+		      if (GET_CODE (scan) == CODE_LABEL)
-+			break;
-+
-+		      if (!INSN_P (scan))
-+			continue;
-+
-+		      /* Don't try to trace forward past a JUMP.  To optimize
-+		         safely, we would have to check that all the
-+		         instructions at the jump destination did not use REG.
-+		       */
-+
-+		      if (GET_CODE (scan) == JUMP_INSN)
-+			{
-+			  break;
-+			}
-+
-+		      if (!reg_mentioned_p (src_reg, PATTERN (scan)))
-+			continue;
-+
-+		      /* We have reached the cast insn */
-+		      if (scan == insn)
-+			{
-+			  /* We can remove cast and replace the destination
-+			     register of the link insn with the destination
-+			     of the cast */
-+			  if (dump_file)
-+			    {
-+			      fprintf (dump_file,
-+				       ";;  INSN %i removed, casted value unused. "
-+				       "Destination of removed cast operation: register %i,  folded into INSN %i.\n",
-+				       INSN_UID (insn), REGNO (reg),
-+				       INSN_UID (link));
-+			    }
-+			  /* Update link insn */
-+			  SET_DEST (PATTERN (link)) =
-+			    gen_rtx_REG (mode, REGNO (reg));
-+			  /* Force the instruction to be recognized again */
-+			  INSN_CODE (link) = -1;
-+
-+			  /* Delete insn */
-+			  SET_INSN_DELETED (insn);
-+			  /* Force the instruction to be recognized again */
-+			  INSN_CODE (insn) = -1;
-+			  break;
-+			}
-+		    }
-+		}
-+	    }
-+	}
-+    }
-+
-+  if (TARGET_MD_REORG_OPTIMIZATION && (optimize_size || (optimize > 0)))
-+    {
-+
-+      /* Scan through all insns looking for shifted add operations */
-+      if (dump_file)
-+	{
-+	  fprintf (dump_file,
-+		   ";; Deleting redundant shifted add operations:\n");
-+	}
-+      for (insn = first; insn; insn = NEXT_INSN (insn))
-+	{
-+	  rtx reg, mem_expr, scan, op0, op1;
-+	  int add_only_used_as_pointer;
-+
-+	  if (INSN_P (insn)
-+	      && GET_CODE (PATTERN (insn)) == SET
-+	      && GET_CODE (SET_SRC (PATTERN (insn))) == PLUS
-+	      && (GET_CODE (XEXP (SET_SRC (PATTERN (insn)), 0)) == MULT
-+		  || GET_CODE (XEXP (SET_SRC (PATTERN (insn)), 0)) == ASHIFT)
-+	      && GET_CODE (XEXP (XEXP (SET_SRC (PATTERN (insn)), 0), 1)) ==
-+	      CONST_INT && REG_P (SET_DEST (PATTERN (insn)))
-+	      && REG_P (XEXP (SET_SRC (PATTERN (insn)), 1))
-+	      && REG_P (XEXP (XEXP (SET_SRC (PATTERN (insn)), 0), 0)))
-+	    {
-+	      reg = SET_DEST (PATTERN (insn));
-+	      mem_expr = SET_SRC (PATTERN (insn));
-+	      op0 = XEXP (XEXP (mem_expr, 0), 0);
-+	      op1 = XEXP (mem_expr, 1);
-+	    }
-+	  else
-+	    {
-+	      continue;
-+	    }
-+
-+	  /* Scan forward the check if the result of the shifted add
-+	     operation is only used as an address in memory operations and
-+	     that the operands to the shifted add are not clobbered. */
-+	  add_only_used_as_pointer = false;
-+	  for (scan = NEXT_INSN (insn); scan; scan = NEXT_INSN (scan))
-+	    {
-+	      if (!INSN_P (scan))
-+		continue;
-+
-+	      /* Don't try to trace forward past a JUMP or CALL.  To optimize
-+	         safely, we would have to check that all the instructions at
-+	         the jump destination did not use REG.  */
-+
-+	      if (GET_CODE (scan) == JUMP_INSN)
-+		{
-+		  break;
-+		}
-+
-+	      /* If used in a call insn then we cannot optimize it away */
-+	      if (CALL_P (scan) && find_regno_fusage (scan, USE, REGNO (reg)))
-+		break;
-+
-+	      /* If any of the operands of the shifted add are clobbered we
-+	         cannot optimize the shifted adda away */
-+	      if ((reg_set_p (op0, scan) && (REGNO (op0) != REGNO (reg)))
-+		  || (reg_set_p (op1, scan) && (REGNO (op1) != REGNO (reg))))
-+		break;
-+
-+	      if (!reg_mentioned_p (reg, PATTERN (scan)))
-+		continue;
-+
-+	      /* If used any other place than as a pointer or as the
-+	         destination register we failed */
-+	      if (!(single_set (scan)
-+		    && GET_CODE (PATTERN (scan)) == SET
-+		    && ((MEM_P (SET_DEST (PATTERN (scan)))
-+			 && REG_P (XEXP (SET_DEST (PATTERN (scan)), 0))
-+			 && REGNO (XEXP (SET_DEST (PATTERN (scan)), 0)) ==
-+			 REGNO (reg)) || (MEM_P (SET_SRC (PATTERN (scan)))
-+					  &&
-+					  REG_P (XEXP
-+						 (SET_SRC (PATTERN (scan)),
-+						  0))
-+					  &&
-+					  REGNO (XEXP
-+						 (SET_SRC (PATTERN (scan)),
-+						  0)) == REGNO (reg))))
-+		  && !(GET_CODE (PATTERN (scan)) == SET
-+		       && REG_P (SET_DEST (PATTERN (scan)))
-+		       && !regno_use_in (REGNO (reg),
-+					 SET_SRC (PATTERN (scan)))))
-+		break;
-+
-+	      /* Check if register is dead or set in this insn */
-+	      if (dead_or_set_p (scan, reg))
-+		{
-+		  add_only_used_as_pointer = true;
-+		  break;
-+		}
-+	    }
-+
-+	  if (add_only_used_as_pointer)
-+	    {
-+	      /* Lets delete the add insn and replace all memory references
-+	         which uses the pointer with the full expression. */
-+	      if (dump_file)
-+		{
-+		  fprintf (dump_file,
-+			   ";; Deleting INSN %i since address expression can be folded into all "
-+			   "memory references using this expression\n",
-+			   INSN_UID (insn));
-+		}
-+	      SET_INSN_DELETED (insn);
-+	      /* Force the instruction to be recognized again */
-+	      INSN_CODE (insn) = -1;
-+
-+	      for (scan = NEXT_INSN (insn); scan; scan = NEXT_INSN (scan))
-+		{
-+		  if (!INSN_P (scan))
-+		    continue;
-+
-+		  if (!reg_mentioned_p (reg, PATTERN (scan)))
-+		    continue;
-+
-+		  /* If used any other place than as a pointer or as the
-+		     destination register we failed */
-+		  if ((single_set (scan)
-+		       && GET_CODE (PATTERN (scan)) == SET
-+		       && ((MEM_P (SET_DEST (PATTERN (scan)))
-+			    && REG_P (XEXP (SET_DEST (PATTERN (scan)), 0))
-+			    && REGNO (XEXP (SET_DEST (PATTERN (scan)), 0)) ==
-+			    REGNO (reg)) || (MEM_P (SET_SRC (PATTERN (scan)))
-+					     &&
-+					     REG_P (XEXP
-+						    (SET_SRC (PATTERN (scan)),
-+						     0))
-+					     &&
-+					     REGNO (XEXP
-+						    (SET_SRC (PATTERN (scan)),
-+						     0)) == REGNO (reg)))))
-+		    {
-+		      if (dump_file)
-+			{
-+			  fprintf (dump_file,
-+				   ";; Register %i replaced by indexed address in INSN %i\n",
-+				   REGNO (reg), INSN_UID (scan));
-+			}
-+		      if (MEM_P (SET_DEST (PATTERN (scan))))
-+			XEXP (SET_DEST (PATTERN (scan)), 0) = mem_expr;
-+		      else
-+			XEXP (SET_SRC (PATTERN (scan)), 0) = mem_expr;
-+		    }
-+
-+		  /* Check if register is dead or set in this insn */
-+		  if (dead_or_set_p (scan, reg))
-+		    {
-+		      break;
-+		    }
-+
-+		}
-+	    }
-+	}
-+    }
-+}
-+
-+/* Exported to toplev.c.
-+
-+   Do a final pass over the function, just before delayed branch
-+   scheduling.  */
-+
-+static void
-+avr32_reorg (void)
-+{
-+  rtx insn;
-+  HOST_WIDE_INT address = 0;
-+  Mfix *fix;
-+
-+  minipool_fix_head = minipool_fix_tail = NULL;
-+
-+  /* The first insn must always be a note, or the code below won't scan it
-+     properly.  */
-+  insn = get_insns ();
-+  if (GET_CODE (insn) != NOTE)
-+    abort ();
-+
-+  /* Scan all the insns and record the operands that will need fixing.  */
-+  for (insn = next_nonnote_insn (insn); insn; insn = next_nonnote_insn (insn))
-+    {
-+      if (GET_CODE (insn) == BARRIER)
-+	push_minipool_barrier (insn, address);
-+      else if (INSN_P (insn))
-+	{
-+	  rtx table;
-+
-+	  note_invalid_constants (insn, address, true);
-+	  address += get_attr_length (insn);
-+
-+	  /* If the insn is a vector jump, add the size of the table and skip
-+	     the table.  */
-+	  if ((table = is_jump_table (insn)) != NULL)
-+	    {
-+	      address += get_jump_table_size (table);
-+	      insn = table;
-+	    }
-+	}
-+    }
-+
-+  fix = minipool_fix_head;
-+
-+  /* Now scan the fixups and perform the required changes.  */
-+  while (fix)
-+    {
-+      Mfix *ftmp;
-+      Mfix *fdel;
-+      Mfix *last_added_fix;
-+      Mfix *last_barrier = NULL;
-+      Mfix *this_fix;
-+
-+      /* Skip any further barriers before the next fix.  */
-+      while (fix && GET_CODE (fix->insn) == BARRIER)
-+	fix = fix->next;
-+
-+      /* No more fixes.  */
-+      if (fix == NULL)
-+	break;
-+
-+      last_added_fix = NULL;
-+
-+      for (ftmp = fix; ftmp; ftmp = ftmp->next)
-+	{
-+	  if (GET_CODE (ftmp->insn) == BARRIER)
-+	    {
-+	      if (ftmp->address >= minipool_vector_head->max_address)
-+		break;
-+
-+	      last_barrier = ftmp;
-+	    }
-+	  else if ((ftmp->minipool = add_minipool_forward_ref (ftmp)) == NULL)
-+	    break;
-+
-+	  last_added_fix = ftmp;	/* Keep track of the last fix added.
-+					   */
-+	}
-+
-+      /* If we found a barrier, drop back to that; any fixes that we could
-+         have reached but come after the barrier will now go in the next
-+         mini-pool.  */
-+      if (last_barrier != NULL)
-+	{
-+	  /* Reduce the refcount for those fixes that won't go into this pool
-+	     after all.  */
-+	  for (fdel = last_barrier->next;
-+	       fdel && fdel != ftmp; fdel = fdel->next)
-+	    {
-+	      fdel->minipool->refcount--;
-+	      fdel->minipool = NULL;
-+	    }
-+
-+	  ftmp = last_barrier;
-+	}
-+      else
-+	{
-+	  /* ftmp is first fix that we can't fit into this pool and there no
-+	     natural barriers that we could use.  Insert a new barrier in the
-+	     code somewhere between the previous fix and this one, and
-+	     arrange to jump around it.  */
-+	  HOST_WIDE_INT max_address;
-+
-+	  /* The last item on the list of fixes must be a barrier, so we can
-+	     never run off the end of the list of fixes without last_barrier
-+	     being set.  */
-+	  if (ftmp == NULL)
-+	    abort ();
-+
-+	  max_address = minipool_vector_head->max_address;
-+	  /* Check that there isn't another fix that is in range that we
-+	     couldn't fit into this pool because the pool was already too
-+	     large: we need to put the pool before such an instruction.  */
-+	  if (ftmp->address < max_address)
-+	    max_address = ftmp->address;
-+
-+	  last_barrier = create_fix_barrier (last_added_fix, max_address);
-+	}
-+
-+      assign_minipool_offsets (last_barrier);
-+
-+      while (ftmp)
-+	{
-+	  if (GET_CODE (ftmp->insn) != BARRIER
-+	      && ((ftmp->minipool = add_minipool_backward_ref (ftmp))
-+		  == NULL))
-+	    break;
-+
-+	  ftmp = ftmp->next;
-+	}
-+
-+      /* Scan over the fixes we have identified for this pool, fixing them up
-+         and adding the constants to the pool itself.  */
-+      for (this_fix = fix; this_fix && ftmp != this_fix;
-+	   this_fix = this_fix->next)
-+	if (GET_CODE (this_fix->insn) != BARRIER
-+	    /* Do nothing for entries present just to force the insertion of
-+	       a minipool. */
-+	    && !IS_FORCE_MINIPOOL (this_fix->value))
-+	  {
-+	    rtx addr = plus_constant (gen_rtx_LABEL_REF (VOIDmode,
-+							 minipool_vector_label),
-+				      this_fix->minipool->offset);
-+	    *this_fix->loc = gen_rtx_MEM (this_fix->mode, addr);
-+	  }
-+
-+      dump_minipool (last_barrier->insn);
-+      fix = ftmp;
-+    }
-+
-+  /* Free the minipool memory.  */
-+  obstack_free (&minipool_obstack, minipool_startobj);
-+
-+  avr32_reorg_optimization ();
-+}
-+
-+
-+/*
-+ Hook for doing some final scanning of instructions. Does nothing yet...*/
-+void
-+avr32_final_prescan_insn (rtx insn ATTRIBUTE_UNUSED,
-+			  rtx * opvec ATTRIBUTE_UNUSED,
-+			  int noperands ATTRIBUTE_UNUSED)
-+{
-+  return;
-+}
-+
-+
-+
-+int
-+avr32_expand_movcc (enum machine_mode mode, rtx operands[])
-+{
-+  rtx operator;
-+  rtx compare_op0 = avr32_compare_op0;
-+  rtx compare_op1 = avr32_compare_op1;
-+
-+  /* Only allow certain compare operations */
-+  if (GET_MODE (compare_op0) != DImode
-+      && GET_MODE (compare_op0) != SImode
-+      && GET_MODE (compare_op0) != HImode && GET_MODE (compare_op0) != QImode)
-+    return FALSE;
-+
-+  if (GET_CODE (compare_op0) == MEM)
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	compare_op0 = force_reg (GET_MODE (compare_op0), compare_op0);
-+    }
-+
-+  if (GET_CODE (compare_op1) == MEM)
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	compare_op1 = force_reg (GET_MODE (compare_op1), compare_op1);
-+    }
-+
-+  /* For DI, HI and QI mode force comparison operands to registers */
-+  if (GET_MODE (compare_op0) == DImode
-+      || GET_MODE (compare_op0) == HImode || GET_MODE (compare_op0) == QImode)
-+    {
-+      if (GET_CODE (compare_op0) != REG)
-+	{
-+	  if (no_new_pseudos)
-+	    return FALSE;
-+	  else
-+	    compare_op0 = force_reg (GET_MODE (compare_op0), compare_op0);
-+	}
-+
-+      if (GET_CODE (compare_op1) != REG)
-+	{
-+	  if (no_new_pseudos)
-+	    return FALSE;
-+	  else
-+	    compare_op1 = force_reg (GET_MODE (compare_op0), compare_op1);
-+	}
-+    }
-+
-+  /* Force any immediate compare operands for SI, larger than the L
-+     constraint, to a register */
-+  if (GET_MODE (compare_op0) == SImode)
-+    {
-+      if ((GET_CODE (compare_op0) == CONST_INT
-+	   && !avr32_const_ok_for_constraint_p (INTVAL (compare_op0), 'K',
-+						"Ks21")))
-+	{
-+	  if (no_new_pseudos)
-+	    return FALSE;
-+	  else
-+	    compare_op0 = force_reg (SImode, compare_op0);
-+	}
-+
-+      if ((GET_CODE (compare_op1) == CONST_INT
-+	   && !avr32_const_ok_for_constraint_p (INTVAL (compare_op1), 'K',
-+						"Ks21")))
-+	{
-+	  if (no_new_pseudos)
-+	    return FALSE;
-+	  else
-+	    compare_op1 = force_reg (SImode, compare_op1);
-+	}
-+    }
-+
-+  /* If we have immediates larger than can be allowed in conditional mov
-+     instructions, force them to registers */
-+  if (GET_CODE (operands[2]) == CONST_INT
-+      && !avr32_const_ok_for_constraint_p (INTVAL (operands[2]), 'K', "Ks08"))
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	operands[2] = force_reg (mode, operands[2]);
-+    }
-+
-+  if (GET_CODE (operands[3]) == CONST_INT
-+      && !avr32_const_ok_for_constraint_p (INTVAL (operands[3]), 'K', "Ks08"))
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	operands[3] = force_reg (mode, operands[3]);
-+    }
-+
-+  /* Emit the actual instruction */
-+  operator = gen_rtx_EQ (VOIDmode, const0_rtx, const0_rtx);
-+  PUT_CODE (operator, GET_CODE (operands[1]));
-+  switch (mode)
-+    {
-+    case SImode:
-+      switch (GET_MODE (compare_op0))
-+	{
-+	case SImode:
-+	  emit_insn (gen_movsicc_cmpsi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case DImode:
-+	  emit_insn (gen_movsicc_cmpdi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case HImode:
-+	  emit_insn (gen_movsicc_cmphi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case QImode:
-+	  emit_insn (gen_movsicc_cmpqi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	default:
-+	  return FALSE;
-+	}
-+      break;
-+    case HImode:
-+      switch (GET_MODE (compare_op0))
-+	{
-+	case SImode:
-+	  emit_insn (gen_movhicc_cmpsi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case DImode:
-+	  emit_insn (gen_movhicc_cmpdi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case HImode:
-+	  emit_insn (gen_movhicc_cmphi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case QImode:
-+	  emit_insn (gen_movhicc_cmpqi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	default:
-+	  return FALSE;
-+	}
-+      break;
-+    case QImode:
-+      switch (GET_MODE (compare_op0))
-+	{
-+	case SImode:
-+	  emit_insn (gen_movqicc_cmpsi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case DImode:
-+	  emit_insn (gen_movqicc_cmpdi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case HImode:
-+	  emit_insn (gen_movqicc_cmphi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case QImode:
-+	  emit_insn (gen_movqicc_cmpqi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	default:
-+	  return FALSE;
-+	}
-+      break;
-+    default:
-+      return FALSE;
-+    }
-+
-+  return TRUE;
-+}
-+
-+
-+int
-+avr32_expand_addcc (enum machine_mode mode, rtx operands[])
-+{
-+  rtx operator;
-+  rtx compare_op0 = avr32_compare_op0;
-+  rtx compare_op1 = avr32_compare_op1;
-+
-+  /* Check if we have an add/sub with an k8 immediate */
-+  if (!(GET_CODE (operands[3]) == CONST_INT
-+	&& avr32_const_ok_for_constraint_p (-INTVAL (operands[3]), 'K',
-+					    "Ks08")))
-+    return FALSE;
-+  else
-+    /* Flip sign */
-+    operands[3] = GEN_INT (-INTVAL (operands[3]));
-+
-+  /* Only allow certain compare operations */
-+  if (GET_MODE (compare_op0) != DImode
-+      && GET_MODE (compare_op0) != SImode
-+      && GET_MODE (compare_op0) != HImode && GET_MODE (compare_op0) != QImode)
-+    return FALSE;
-+
-+  if (GET_CODE (compare_op0) == MEM)
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	compare_op0 = force_reg (GET_MODE (compare_op0), compare_op0);
-+    }
-+
-+  if (GET_CODE (compare_op1) == MEM)
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	compare_op1 = force_reg (GET_MODE (compare_op1), compare_op1);
-+    }
-+
-+  /* For DI, HI and QI mode force comparison operands to registers */
-+  if (GET_MODE (compare_op0) == DImode
-+      || GET_MODE (compare_op0) == HImode || GET_MODE (compare_op0) == QImode)
-+    {
-+      if (GET_CODE (compare_op0) != REG)
-+	{
-+	  if (no_new_pseudos)
-+	    return FALSE;
-+	  else
-+	    compare_op0 = force_reg (GET_MODE (compare_op0), compare_op0);
-+	}
-+
-+      if (GET_CODE (compare_op1) != REG)
-+	{
-+	  if (no_new_pseudos)
-+	    return FALSE;
-+	  else
-+	    compare_op1 = force_reg (GET_MODE (compare_op0), compare_op1);
-+	}
-+    }
-+
-+  /* Force any immediate compare operands for SI, larger than the L
-+     constraint, to a register */
-+  if (GET_MODE (compare_op0) == SImode)
-+    {
-+      if ((GET_CODE (compare_op0) == CONST_INT
-+	   && !avr32_const_ok_for_constraint_p (INTVAL (compare_op0), 'K',
-+						"Ks21")))
-+	{
-+	  if (no_new_pseudos)
-+	    return FALSE;
-+	  else
-+	    compare_op0 = force_reg (SImode, compare_op0);
-+	}
-+
-+      if ((GET_CODE (compare_op1) == CONST_INT
-+	   && !avr32_const_ok_for_constraint_p (INTVAL (compare_op1), 'K',
-+						"Ks21")))
-+	{
-+	  if (no_new_pseudos)
-+	    return FALSE;
-+	  else
-+	    compare_op1 = force_reg (SImode, compare_op1);
-+	}
-+    }
-+
-+  /* If we have immediates larger than can be allowed in conditional mov
-+     instructions, force them to registers */
-+  if (GET_CODE (operands[2]) == CONST_INT
-+      && !avr32_const_ok_for_constraint_p (INTVAL (operands[2]), 'K', "Ks08"))
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	operands[2] = force_reg (mode, operands[2]);
-+    }
-+
-+  if (GET_CODE (operands[3]) == CONST_INT
-+      && !avr32_const_ok_for_constraint_p (INTVAL (operands[3]), 'K', "Ks08"))
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	operands[3] = force_reg (mode, operands[3]);
-+    }
-+
-+  if (GET_CODE (operands[0]) != REG)
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	operands[0] = force_reg (GET_MODE (operands[0]), operands[0]);
-+    }
-+
-+  if (GET_CODE (operands[2]) != REG)
-+    {
-+      if (no_new_pseudos)
-+	return FALSE;
-+      else
-+	operands[2] = force_reg (GET_MODE (operands[2]), operands[2]);
-+    }
-+
-+  /* Check if operands[0] and operands[2] are different */
-+  if (REGNO (operands[0]) != REGNO (operands[2]))
-+    {
-+      emit_move_insn (operands[0], operands[2]);
-+      operands[2] = operands[0];
-+    }
-+
-+  /* Emit the actual instruction */
-+  operator = gen_rtx_EQ (VOIDmode, const0_rtx, const0_rtx);
-+  PUT_CODE (operator, GET_CODE (operands[1]));
-+  switch (mode)
-+    {
-+    case SImode:
-+      switch (GET_MODE (compare_op0))
-+	{
-+	case SImode:
-+	  emit_insn (gen_addsicc_cmpsi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case DImode:
-+	  emit_insn (gen_addsicc_cmpdi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case HImode:
-+	  emit_insn (gen_addsicc_cmphi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case QImode:
-+	  emit_insn (gen_addsicc_cmpqi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	default:
-+	  return FALSE;
-+	}
-+      break;
-+    case HImode:
-+      switch (GET_MODE (compare_op0))
-+	{
-+	case SImode:
-+	  emit_insn (gen_addhicc_cmpsi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case DImode:
-+	  emit_insn (gen_addhicc_cmpdi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case HImode:
-+	  emit_insn (gen_addhicc_cmphi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case QImode:
-+	  emit_insn (gen_addhicc_cmpqi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	default:
-+	  return FALSE;
-+	}
-+      break;
-+    case QImode:
-+      switch (GET_MODE (compare_op0))
-+	{
-+	case SImode:
-+	  emit_insn (gen_addqicc_cmpsi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case DImode:
-+	  emit_insn (gen_addqicc_cmpdi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case HImode:
-+	  emit_insn (gen_addqicc_cmphi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	case QImode:
-+	  emit_insn (gen_addqicc_cmpqi
-+		     (operands[0], operator, operands[2], operands[3],
-+		      compare_op0, compare_op1));
-+	  break;
-+	default:
-+	  return FALSE;
-+	}
-+      break;
-+    default:
-+      return FALSE;
-+    }
-+
-+  return TRUE;
-+}
-+
-+/* Function for changing the condition on the next instruction,
-+   should be used when emmiting compare instructions and
-+   the condition of the next instruction needs to change.
-+*/
-+int
-+set_next_insn_cond (rtx cur_insn, rtx new_cond)
-+{
-+  rtx next_insn = next_nonnote_insn (cur_insn);
-+  if ((next_insn != NULL_RTX)
-+      && (INSN_P (next_insn))
-+      && (GET_CODE (PATTERN (next_insn)) == SET)
-+      && (GET_CODE (SET_SRC (PATTERN (next_insn))) == IF_THEN_ELSE))
-+    {
-+      /* Branch instructions */
-+      XEXP (SET_SRC (PATTERN (next_insn)), 0) = new_cond;
-+      /* Force the instruction to be recognized again */
-+      INSN_CODE (next_insn) = -1;
-+      return TRUE;
-+    }
-+  else if ((next_insn != NULL_RTX)
-+	   && (INSN_P (next_insn))
-+	   && (GET_CODE (PATTERN (next_insn)) == SET)
-+	   && comparison_operator (SET_SRC (PATTERN (next_insn)),
-+				   GET_MODE (SET_SRC (PATTERN (next_insn)))))
-+    {
-+      /* scc with no compare */
-+      SET_SRC (PATTERN (next_insn)) = new_cond;
-+      /* Force the instruction to be recognized again */
-+      INSN_CODE (next_insn) = -1;
-+      return TRUE;
-+    }
-+
-+  return FALSE;
-+}
-+
-+/* Function for obtaining the condition for the next instruction
-+   after cur_insn.
-+*/
-+rtx
-+get_next_insn_cond (rtx cur_insn)
-+{
-+  rtx next_insn = next_nonnote_insn (cur_insn);
-+  rtx cond = NULL_RTX;
-+  if ((next_insn != NULL_RTX)
-+      && (INSN_P (next_insn))
-+      && (GET_CODE (PATTERN (next_insn)) == SET)
-+      && (GET_CODE (SET_SRC (PATTERN (next_insn))) == IF_THEN_ELSE))
-+    {
-+      /* Branch instructions */
-+      cond = XEXP (SET_SRC (PATTERN (next_insn)), 0);
-+    }
-+  else if ((next_insn != NULL_RTX)
-+	   && (INSN_P (next_insn))
-+	   && (GET_CODE (PATTERN (next_insn)) == SET)
-+	   && comparison_operator (SET_SRC (PATTERN (next_insn)),
-+				   GET_MODE (SET_SRC (PATTERN (next_insn)))))
-+    {
-+      /* scc with no compare */
-+      cond = SET_SRC (PATTERN (next_insn));
-+    }
-+
-+  return cond;
-+}
-+
-+int
-+avr32_expand_scc (enum rtx_code cond, rtx * operands)
-+{
-+
-+  rtx comparation;
-+  /* Only allow certain compare operations */
-+  if (GET_MODE (avr32_compare_op0) != DImode
-+      && GET_MODE (avr32_compare_op0) != SImode
-+      && GET_MODE (avr32_compare_op0) != HImode
-+      && GET_MODE (avr32_compare_op0) != QImode)
-+    return FALSE;
-+
-+  /* Delete compare instruction as it is merged into this instruction */
-+  remove_insn (get_last_insn_anywhere ());
-+
-+  if (!REG_P (avr32_compare_op0))
-+    avr32_compare_op0 =
-+      force_reg (GET_MODE (avr32_compare_op0), avr32_compare_op0);
-+
-+  if (GET_MODE (avr32_compare_op0) != SImode && !REG_P (avr32_compare_op1))
-+    {
-+      avr32_compare_op1 =
-+	force_reg (GET_MODE (avr32_compare_op0), avr32_compare_op1);
-+    }
-+  else if (GET_MODE (avr32_compare_op0) == SImode
-+	   && !REG_P (avr32_compare_op1)
-+	   && (GET_CODE (avr32_compare_op1) != CONST_INT
-+	       || (GET_CODE (avr32_compare_op1) == CONST_INT
-+		   &&
-+		   !avr32_const_ok_for_constraint_p (INTVAL
-+						     (avr32_compare_op1), 'K',
-+						     "Ks21"))))
-+    avr32_compare_op1 =
-+      force_reg (GET_MODE (avr32_compare_op0), avr32_compare_op1);
-+
-+
-+  comparation =
-+    gen_rtx_EQ (SImode,
-+		gen_rtx_COMPARE (GET_MODE (avr32_compare_op0),
-+				 avr32_compare_op0, avr32_compare_op1),
-+		const0_rtx);
-+  /* Set correct condition */
-+  PUT_CODE (comparation, cond);
-+  emit_insn (gen_rtx_SET (VOIDmode, operands[0], comparation));
-+  return TRUE;
-+}
-+
-+rtx
-+avr32_output_cmp (rtx cond, enum machine_mode mode, rtx op0, rtx op1)
-+{
-+
-+  rtx new_cond = NULL_RTX;
-+  rtx ops[2];
-+  rtx compare_pattern;
-+  ops[0] = op0;
-+  ops[1] = op1;
-+
-+  compare_pattern = gen_rtx_COMPARE (mode, op0, op1);
-+
-+  new_cond = is_compare_redundant (compare_pattern, cond);
-+
-+  if (new_cond != NULL_RTX)
-+    return new_cond;
-+
-+  /* Insert compare */
-+  switch (mode)
-+    {
-+    case QImode:
-+      output_asm_insn ("cp.b\t%0, %1", ops);
-+      break;
-+    case HImode:
-+      output_asm_insn ("cp.h\t%0, %1", ops);
-+      break;
-+    case SImode:
-+      output_asm_insn ("cp.w\t%0, %1", ops);
-+      break;
-+    case DImode:
-+      if (rtx_equal_p (op1, const0_rtx))
-+	output_asm_insn ("cp.w\t%0, %1\ncpc\t%m0", ops);
-+      else
-+	output_asm_insn ("cp.w\t%0, %1\ncpc\t%m0, %m1", ops);
-+      break;
-+    default:
-+      internal_error ("Unknown comparison mode");
-+      break;
-+    }
-+
-+  return cond;
-+}
-+
-+int
-+avr32_load_multiple_operation (rtx op,
-+			       enum machine_mode mode ATTRIBUTE_UNUSED)
-+{
-+  int count = XVECLEN (op, 0);
-+  unsigned int dest_regno;
-+  rtx src_addr;
-+  rtx elt;
-+  int i = 1, base = 0;
-+
-+  if (count <= 1 || GET_CODE (XVECEXP (op, 0, 0)) != SET)
-+    return 0;
-+
-+  /* Check to see if this might be a write-back.  */
-+  if (GET_CODE (SET_SRC (elt = XVECEXP (op, 0, 0))) == PLUS)
-+    {
-+      i++;
-+      base = 1;
-+
-+      /* Now check it more carefully.  */
-+      if (GET_CODE (SET_DEST (elt)) != REG
-+	  || GET_CODE (XEXP (SET_SRC (elt), 0)) != REG
-+	  || GET_CODE (XEXP (SET_SRC (elt), 1)) != CONST_INT
-+	  || INTVAL (XEXP (SET_SRC (elt), 1)) != (count - 1) * 4)
-+	return 0;
-+    }
-+
-+  /* Perform a quick check so we don't blow up below.  */
-+  if (count <= 1
-+      || GET_CODE (XVECEXP (op, 0, i - 1)) != SET
-+      || GET_CODE (SET_DEST (XVECEXP (op, 0, i - 1))) != REG
-+      || GET_CODE (SET_SRC (XVECEXP (op, 0, i - 1))) != UNSPEC)
-+    return 0;
-+
-+  dest_regno = REGNO (SET_DEST (XVECEXP (op, 0, i - 1)));
-+  src_addr = XEXP (SET_SRC (XVECEXP (op, 0, i - 1)), 0);
-+
-+  for (; i < count; i++)
-+    {
-+      elt = XVECEXP (op, 0, i);
-+
-+      if (GET_CODE (elt) != SET
-+	  || GET_CODE (SET_DEST (elt)) != REG
-+	  || GET_MODE (SET_DEST (elt)) != SImode
-+	  || GET_CODE (SET_SRC (elt)) != UNSPEC)
-+	return 0;
-+    }
-+
-+  return 1;
-+}
-+
-+int
-+avr32_store_multiple_operation (rtx op,
-+				enum machine_mode mode ATTRIBUTE_UNUSED)
-+{
-+  int count = XVECLEN (op, 0);
-+  int src_regno;
-+  rtx dest_addr;
-+  rtx elt;
-+  int i = 1;
-+
-+  if (count <= 1 || GET_CODE (XVECEXP (op, 0, 0)) != SET)
-+    return 0;
-+
-+  /* Perform a quick check so we don't blow up below.  */
-+  if (count <= i
-+      || GET_CODE (XVECEXP (op, 0, i - 1)) != SET
-+      || GET_CODE (SET_DEST (XVECEXP (op, 0, i - 1))) != MEM
-+      || GET_CODE (SET_SRC (XVECEXP (op, 0, i - 1))) != UNSPEC)
-+    return 0;
-+
-+  src_regno = REGNO (SET_SRC (XVECEXP (op, 0, i - 1)));
-+  dest_addr = XEXP (SET_DEST (XVECEXP (op, 0, i - 1)), 0);
-+
-+  for (; i < count; i++)
-+    {
-+      elt = XVECEXP (op, 0, i);
-+
-+      if (GET_CODE (elt) != SET
-+	  || GET_CODE (SET_DEST (elt)) != MEM
-+	  || GET_MODE (SET_DEST (elt)) != SImode
-+	  || GET_CODE (SET_SRC (elt)) != UNSPEC)
-+	return 0;
-+    }
-+
-+  return 1;
-+}
-+
-+int
-+avr32_valid_macmac_bypass (rtx insn_out, rtx insn_in)
-+{
-+  /* Check if they use the same accumulator */
-+  if (rtx_equal_p
-+      (SET_DEST (PATTERN (insn_out)), SET_DEST (PATTERN (insn_in))))
-+    {
-+      return TRUE;
-+    }
-+
-+  return FALSE;
-+}
-+
-+int
-+avr32_valid_mulmac_bypass (rtx insn_out, rtx insn_in)
-+{
-+  /*
-+     Check if the mul instruction produces the accumulator for the mac
-+     instruction. */
-+  if (rtx_equal_p
-+      (SET_DEST (PATTERN (insn_out)), SET_DEST (PATTERN (insn_in))))
-+    {
-+      return TRUE;
-+    }
-+  return FALSE;
-+}
-+
-+int
-+avr32_store_bypass (rtx insn_out, rtx insn_in)
-+{
-+  /* Only valid bypass if the output result is used as an src in the store
-+     instruction, NOT if used as a pointer or base. */
-+  if (rtx_equal_p
-+      (SET_DEST (PATTERN (insn_out)), SET_SRC (PATTERN (insn_in))))
-+    {
-+      return TRUE;
-+    }
-+
-+  return FALSE;
-+}
-+
-+int
-+avr32_mul_waw_bypass (rtx insn_out, rtx insn_in)
-+{
-+  /* Check if the register holding the result from the mul instruction is
-+     used as a result register in the input instruction. */
-+  if (rtx_equal_p
-+      (SET_DEST (PATTERN (insn_out)), SET_DEST (PATTERN (insn_in))))
-+    {
-+      return TRUE;
-+    }
-+
-+  return FALSE;
-+}
-+
-+int
-+avr32_valid_load_double_bypass (rtx insn_out, rtx insn_in)
-+{
-+  /* Check if the first loaded word in insn_out is used in insn_in. */
-+  rtx dst_reg;
-+  rtx second_loaded_reg;
-+
-+  /* If this is a double alu operation then the bypass is not valid */
-+  if ((get_attr_type (insn_in) == TYPE_ALU
-+       || get_attr_type (insn_in) == TYPE_ALU2)
-+      && (GET_MODE_SIZE (GET_MODE (SET_DEST (PATTERN (insn_out)))) > 4))
-+    return FALSE;
-+
-+  /* Get the destination register in the load */
-+  if (!REG_P (SET_DEST (PATTERN (insn_out))))
-+    return FALSE;
-+
-+  dst_reg = SET_DEST (PATTERN (insn_out));
-+  second_loaded_reg = gen_rtx_REG (SImode, REGNO (dst_reg) + 1);
-+
-+  if (!reg_mentioned_p (second_loaded_reg, PATTERN (insn_in)))
-+    return TRUE;
-+
-+  return FALSE;
-+}
-+
-+
-+int
-+avr32_valid_load_quad_bypass (rtx insn_out, rtx insn_in)
-+{
-+  /*
-+     Check if the two first loaded word in insn_out are used in insn_in. */
-+  rtx dst_reg;
-+  rtx third_loaded_reg, fourth_loaded_reg;
-+
-+  /* Get the destination register in the load */
-+  if (!REG_P (SET_DEST (PATTERN (insn_out))))
-+    return FALSE;
-+
-+  dst_reg = SET_DEST (PATTERN (insn_out));
-+  third_loaded_reg = gen_rtx_REG (SImode, REGNO (dst_reg) + 2);
-+  fourth_loaded_reg = gen_rtx_REG (SImode, REGNO (dst_reg) + 3);
-+
-+  if (!reg_mentioned_p (third_loaded_reg, PATTERN (insn_in))
-+      && !reg_mentioned_p (fourth_loaded_reg, PATTERN (insn_in)))
-+    {
-+      return TRUE;
-+    }
-+
-+  return FALSE;
-+}
-+
-+int
-+avr32_sched_use_dfa_pipeline_interface (void)
-+{
-+  /* No need to scedule on avr32_uc architecture. */
-+  return (avr32_arch->arch_type != ARCH_TYPE_AVR32_UC);
-+}
-+
-+void
-+avr32_select_rtx_section (enum machine_mode mode ATTRIBUTE_UNUSED,
-+			  rtx x ATTRIBUTE_UNUSED,
-+			  unsigned HOST_WIDE_INT align ATTRIBUTE_UNUSED)
-+{
-+  /* Let ASM_OUTPUT_POOL_PROLOGUE take care of this */
-+}
-+
-+/* Set up library functions to comply to AVR32 ABI  */
-+
-+static void
-+avr32_init_libfuncs (void)
-+{
-+  /* Convert gcc run-time function names to AVR32 ABI names */
-+
-+  /* Double-precision floating-point arithmetic. */
-+  set_optab_libfunc (add_optab, DFmode, "__avr32_f64_add");
-+  set_optab_libfunc (sdiv_optab, DFmode, "__avr32_f64_div");
-+  set_optab_libfunc (smul_optab, DFmode, "__avr32_f64_mul");
-+  set_optab_libfunc (neg_optab, DFmode, NULL);
-+  set_optab_libfunc (sub_optab, DFmode, "__avr32_f64_sub");
-+
-+  /* Double-precision comparisons.  */
-+  set_optab_libfunc (eq_optab, DFmode, "__avr32_f64_cmp_eq");
-+  set_optab_libfunc (ne_optab, DFmode, NULL);
-+  set_optab_libfunc (lt_optab, DFmode, "__avr32_f64_cmp_lt");
-+  set_optab_libfunc (le_optab, DFmode, NULL);
-+  set_optab_libfunc (ge_optab, DFmode, "__avr32_f64_cmp_ge");
-+  set_optab_libfunc (gt_optab, DFmode, NULL);
-+
-+  /* Single-precision floating-point arithmetic. */
-+  set_optab_libfunc (add_optab, SFmode, "__avr32_f32_add");
-+  set_optab_libfunc (sdiv_optab, SFmode, "__avr32_f32_div");
-+  set_optab_libfunc (smul_optab, SFmode, "__avr32_f32_mul");
-+  set_optab_libfunc (neg_optab, SFmode, NULL);
-+  set_optab_libfunc (sub_optab, SFmode, "__avr32_f32_sub");
-+
-+  /* Single-precision comparisons.  */
-+  set_optab_libfunc (eq_optab, SFmode, "__avr32_f32_cmp_eq");
-+  set_optab_libfunc (ne_optab, SFmode, NULL);
-+  set_optab_libfunc (lt_optab, SFmode, "__avr32_f32_cmp_lt");
-+  set_optab_libfunc (le_optab, SFmode, NULL);
-+  set_optab_libfunc (ge_optab, SFmode, "__avr32_f32_cmp_ge");
-+  set_optab_libfunc (gt_optab, SFmode, NULL);
-+
-+  /* Floating-point to integer conversions. */
-+  set_conv_libfunc (sfix_optab, SImode, DFmode, "__avr32_f64_to_s32");
-+  set_conv_libfunc (ufix_optab, SImode, DFmode, "__avr32_f64_to_u32");
-+  set_conv_libfunc (sfix_optab, DImode, DFmode, "__avr32_f64_to_s64");
-+  set_conv_libfunc (ufix_optab, DImode, DFmode, "__avr32_f64_to_u64");
-+  set_conv_libfunc (sfix_optab, SImode, SFmode, "__avr32_f32_to_s32");
-+  set_conv_libfunc (ufix_optab, SImode, SFmode, "__avr32_f32_to_u32");
-+  set_conv_libfunc (sfix_optab, DImode, SFmode, "__avr32_f32_to_s64");
-+  set_conv_libfunc (ufix_optab, DImode, SFmode, "__avr32_f32_to_u64");
-+
-+  /* Conversions between floating types.  */
-+  set_conv_libfunc (trunc_optab, SFmode, DFmode, "__avr32_f64_to_f32");
-+  set_conv_libfunc (sext_optab, DFmode, SFmode, "__avr32_f32_to_f64");
-+
-+  /* Integer to floating-point conversions.  Table 8.  */
-+  set_conv_libfunc (sfloat_optab, DFmode, SImode, "__avr32_s32_to_f64");
-+  set_conv_libfunc (sfloat_optab, DFmode, DImode, "__avr32_s64_to_f64");
-+  set_conv_libfunc (sfloat_optab, SFmode, SImode, "__avr32_s32_to_f32");
-+  set_conv_libfunc (sfloat_optab, SFmode, DImode, "__avr32_s64_to_f32");
-+  set_conv_libfunc (ufloat_optab, DFmode, SImode, "__avr32_u32_to_f64");
-+  set_conv_libfunc (ufloat_optab, SFmode, SImode, "__avr32_u32_to_f32");
-+  /* TODO: Add these to gcc library functions */
-+
-+  set_conv_libfunc (ufloat_optab, DFmode, DImode, NULL);
-+  set_conv_libfunc (ufloat_optab, SFmode, DImode, NULL);
-+
-+  /* Long long.  Table 9.  */
-+  set_optab_libfunc (smul_optab, DImode, "__avr32_mul64");
-+  set_optab_libfunc (sdiv_optab, DImode, "__avr32_sdiv64");
-+  set_optab_libfunc (udiv_optab, DImode, "__avr32_udiv64");
-+  set_optab_libfunc (smod_optab, DImode, "__avr32_smod64");
-+  set_optab_libfunc (umod_optab, DImode, "__avr32_umod64");
-+  set_optab_libfunc (ashl_optab, DImode, "__avr32_lsl64");
-+  set_optab_libfunc (lshr_optab, DImode, "__avr32_lsr64");
-+  set_optab_libfunc (ashr_optab, DImode, "__avr32_asr64");
-+}
---- /dev/null
-+++ b/gcc/config/avr32/avr32-elf.h
-@@ -0,0 +1,82 @@
-+/*
-+   Elf specific definitions.
-+   Copyright 2003-2006 Atmel Corporation.
-+
-+   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+
-+   This file is part of GCC.
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+
-+/*****************************************************************************
-+ * Controlling the Compilator Driver, 'gcc'
-+ *****************************************************************************/
-+
-+/* Run-time Target Specification.  */
-+#undef  TARGET_VERSION
-+#define TARGET_VERSION  fputs (" (AVR32 GNU with ELF)", stderr);
-+
-+/*
-+Another C string constant used much like LINK_SPEC.  The
-+difference between the two is that STARTFILE_SPEC is used at
-+the very beginning of the command given to the linker.
-+
-+If this macro is not defined, a default is provided that loads the
-+standard C startup file from the usual place.  See gcc.c.
-+*/
-+#undef  STARTFILE_SPEC
-+#define STARTFILE_SPEC "crt0%O%s crti%O%s crtbegin%O%s"
-+
-+#undef LINK_SPEC
-+#define LINK_SPEC "%{muse-oscall:--defsym __do_not_use_oscall_coproc__=0} %{mrelax|O*:%{mno-relax|O0|O1: ;:--relax}} %{mpart=*:-mavr32elf_%*} %{mcpu=*:-mavr32elf_%*}"
-+
-+
-+/*
-+Another C string constant used much like LINK_SPEC.  The
-+difference between the two is that ENDFILE_SPEC is used at
-+the very end of the command given to the linker.
-+
-+Do not define this macro if it does not need to do anything.
-+*/
-+#undef  ENDFILE_SPEC
-+#define ENDFILE_SPEC "crtend%O%s crtn%O%s"
-+
-+
-+/* Target CPU builtins.  */
-+#define TARGET_CPU_CPP_BUILTINS()				\
-+  do								\
-+    {								\
-+      builtin_define ("__avr32__");				\
-+      builtin_define ("__AVR32__");				\
-+      builtin_define ("__AVR32_ELF__");	       	        	\
-+      builtin_define (avr32_part->macro);			\
-+      builtin_define (avr32_arch->macro);			\
-+      if (avr32_arch->uarch_type == UARCH_TYPE_AVR32A)		\
-+	builtin_define ("__AVR32_AVR32A__");			\
-+      else							\
-+	builtin_define ("__AVR32_AVR32B__");			\
-+      if (TARGET_UNALIGNED_WORD)				\
-+	builtin_define ("__AVR32_HAS_UNALIGNED_WORD__");	\
-+      if (TARGET_SIMD)						\
-+	builtin_define ("__AVR32_HAS_SIMD__");			\
-+      if (TARGET_DSP)						\
-+	builtin_define ("__AVR32_HAS_DSP__");			\
-+      if (TARGET_RMW)						\
-+	builtin_define ("__AVR32_HAS_RMW__");			\
-+      if (TARGET_BRANCH_PRED)					\
-+	builtin_define ("__AVR32_HAS_BRANCH_PRED__");		\
-+    }								\
-+  while (0)
---- /dev/null
-+++ b/gcc/config/avr32/avr32.h
-@@ -0,0 +1,3322 @@
-+/*
-+   Definitions of target machine for AVR32.
-+   Copyright 2003-2006 Atmel Corporation.
-+
-+   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+   Initial porting by Anders �dland.
-+
-+   This file is part of GCC.
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+#ifndef GCC_AVR32_H
-+#define GCC_AVR32_H
-+
-+
-+#ifndef OBJECT_FORMAT_ELF
-+#error avr32.h included before elfos.h
-+#endif
-+
-+#ifndef LOCAL_LABEL_PREFIX
-+#define LOCAL_LABEL_PREFIX "."
-+#endif
-+
-+#ifndef SUBTARGET_CPP_SPEC
-+#define SUBTARGET_CPP_SPEC  "-D__ELF__"
-+#endif
-+
-+
-+extern struct rtx_def *avr32_compare_op0;
-+extern struct rtx_def *avr32_compare_op1;
-+
-+
-+extern struct rtx_def *avr32_acc_cache;
-+
-+/* cache instruction op5 codes */
-+#define AVR32_CACHE_INVALIDATE_ICACHE 1
-+
-+/* These bits describe the different types of function supported
-+   by the AVR32 backend.  They are exclusive.  ie a function cannot be both a
-+   normal function and an interworked function, for example.  Knowing the
-+   type of a function is important for determining its prologue and
-+   epilogue sequences.
-+   Note value 7 is currently unassigned.  Also note that the interrupt
-+   function types all have bit 2 set, so that they can be tested for easily.
-+   Note that 0 is deliberately chosen for AVR32_FT_UNKNOWN so that when the
-+   machine_function structure is initialized (to zero) func_type will
-+   default to unknown.  This will force the first use of avr32_current_func_type
-+   to call avr32_compute_func_type.  */
-+#define AVR32_FT_UNKNOWN	 0	/* Type has not yet been determined.
-+					   */
-+#define AVR32_FT_NORMAL		 1	/* Your normal, straightforward
-+					   function.  */
-+#define AVR32_FT_ACALL	         2	/* An acall function.  */
-+#define AVR32_FT_EXCEPTION_HANDLER 3	/* A C++ exception handler.  */
-+#define AVR32_FT_ISR_FULL	 4	/* A fully shadowed interrupt mode.  */
-+#define AVR32_FT_ISR_HALF	 5	/* A half shadowed interrupt mode.  */
-+#define AVR32_FT_ISR_NONE	 6	/* No shadow registers.  */
-+
-+#define AVR32_FT_TYPE_MASK	((1 << 3) - 1)
-+
-+/* In addition functions can have several type modifiers,
-+   outlined by these bit masks:  */
-+#define AVR32_FT_INTERRUPT	(1 << 2)	/* Note overlap with FT_ISR
-+						   and above.  */
-+#define AVR32_FT_NAKED		(1 << 3)	/* No prologue or epilogue.  */
-+#define AVR32_FT_VOLATILE	(1 << 4)	/* Does not return.  */
-+#define AVR32_FT_NESTED		(1 << 5)	/* Embedded inside another
-+						   func. */
-+
-+/* Some macros to test these flags.  */
-+#define AVR32_FUNC_TYPE(t)	(t & AVR32_FT_TYPE_MASK)
-+#define IS_INTERRUPT(t)		(t & AVR32_FT_INTERRUPT)
-+#define IS_VOLATILE(t)     	(t & AVR32_FT_VOLATILE)
-+#define IS_NAKED(t)        	(t & AVR32_FT_NAKED)
-+#define IS_NESTED(t)       	(t & AVR32_FT_NESTED)
-+
-+
-+typedef struct minipool_labels
-+GTY ((chain_next ("%h.next"), chain_prev ("%h.prev")))
-+{
-+  rtx label;
-+  struct minipool_labels *prev;
-+  struct minipool_labels *next;
-+} minipool_labels;
-+
-+/* A C structure for machine-specific, per-function data.
-+   This is added to the cfun structure.  */
-+
-+typedef struct machine_function
-+GTY (())
-+{
-+  /* Records the type of the current function.  */
-+  unsigned long func_type;
-+  /* List of minipool labels, use for checking if code label is valid in a
-+     memory expression */
-+  minipool_labels *minipool_label_head;
-+  minipool_labels *minipool_label_tail;
-+} machine_function;
-+
-+/* Initialize data used by insn expanders.  This is called from insn_emit,
-+   once for every function before code is generated.  */
-+#define INIT_EXPANDERS avr32_init_expanders ()
-+
-+/******************************************************************************
-+ * SPECS
-+ *****************************************************************************/
-+
-+#ifndef ASM_SPEC
-+#define ASM_SPEC "%{fpic:--pic} %{mrelax|O*:%{mno-relax|O0|O1: ;:--linkrelax}} %{march=*:-march=%*} %{mpart=*:-mpart=%*}"
-+#endif
-+
-+#ifndef MULTILIB_DEFAULTS
-+#define MULTILIB_DEFAULTS { "march=ap" }
-+#endif
-+
-+/******************************************************************************
-+ * Run-time Target Specification
-+ *****************************************************************************/
-+#ifndef TARGET_VERSION
-+#define TARGET_VERSION fprintf(stderr, " (AVR32, GNU assembler syntax)");
-+#endif
-+
-+/* Part types. Keep this in sync with the order of avr32_part_types in avr32.c*/
-+enum part_type
-+{
-+  PART_TYPE_AVR32_NONE,
-+  PART_TYPE_AVR32_AP7000,
-+  PART_TYPE_AVR32_AP7010,
-+  PART_TYPE_AVR32_AP7020,
-+  PART_TYPE_AVR32_UC3A0256,
-+  PART_TYPE_AVR32_UC3A0512,
-+  PART_TYPE_AVR32_UC3A1128,
-+  PART_TYPE_AVR32_UC3A1256,
-+  PART_TYPE_AVR32_UC3A1512
-+};
-+
-+/* Microarchitectures. */
-+enum microarchitecture_type
-+{
-+  UARCH_TYPE_AVR32A,
-+  UARCH_TYPE_AVR32B
-+};
-+
-+/* Architectures types which specifies the pipeline.
-+ Keep this in sync with avr32_arch_types in avr32.c*/
-+enum architecture_type
-+{
-+  ARCH_TYPE_AVR32_AP,
-+  ARCH_TYPE_AVR32_UC
-+};
-+
-+/* Flag specifying if the cpu has support for DSP instructions.*/
-+#define FLAG_AVR32_HAS_DSP (1 << 0)
-+/* Flag specifying if the cpu has support for Read-Modify-Write
-+   instructions.*/
-+#define FLAG_AVR32_HAS_RMW (1 << 1)
-+/* Flag specifying if the cpu has support for SIMD instructions. */
-+#define FLAG_AVR32_HAS_SIMD (1 << 2)
-+/* Flag specifying if the cpu has support for unaligned memory word access. */
-+#define FLAG_AVR32_HAS_UNALIGNED_WORD (1 << 3)
-+/* Flag specifying if the cpu has support for branch prediction. */
-+#define FLAG_AVR32_HAS_BRANCH_PRED (1 << 4)
-+
-+/* Structure for holding information about different avr32 CPUs/parts */
-+struct part_type_s
-+{
-+  const char *const name;
-+  enum part_type part_type;
-+  enum architecture_type arch_type;
-+  /* Must lie outside user's namespace.  NULL == no macro.  */
-+  const char *const macro;
-+};
-+
-+/* Structure for holding information about different avr32 pipeline
-+ architectures. */
-+struct arch_type_s
-+{
-+  const char *const name;
-+  enum architecture_type arch_type;
-+  enum microarchitecture_type uarch_type;
-+  const unsigned long feature_flags;
-+  /* Must lie outside user's namespace.  NULL == no macro.  */
-+  const char *const macro;
-+};
-+
-+extern const struct part_type_s *avr32_part;
-+extern const struct arch_type_s *avr32_arch;
-+
-+#define TARGET_SIMD  (avr32_arch->feature_flags & FLAG_AVR32_HAS_SIMD)
-+#define TARGET_DSP  (avr32_arch->feature_flags & FLAG_AVR32_HAS_DSP)
-+#define TARGET_RMW  (avr32_arch->feature_flags & FLAG_AVR32_HAS_RMW)
-+#define TARGET_UNALIGNED_WORD  (avr32_arch->feature_flags & FLAG_AVR32_HAS_UNALIGNED_WORD)
-+#define TARGET_BRANCH_PRED  (avr32_arch->feature_flags & FLAG_AVR32_HAS_BRANCH_PRED)
-+
-+#define CAN_DEBUG_WITHOUT_FP
-+
-+/******************************************************************************
-+ * Storage Layout
-+ *****************************************************************************/
-+
-+/*
-+Define this macro to have the value 1 if the most significant bit in a
-+byte has the lowest number; otherwise define it to have the value zero.
-+This means that bit-field instructions count from the most significant
-+bit.  If the machine has no bit-field instructions, then this must still
-+be defined, but it doesn't matter which value it is defined to.  This
-+macro need not be a constant.
-+
-+This macro does not affect the way structure fields are packed into
-+bytes or words; that is controlled by BYTES_BIG_ENDIAN.
-+*/
-+#define BITS_BIG_ENDIAN 0
-+
-+/*
-+Define this macro to have the value 1 if the most significant byte in a
-+word has the lowest number. This macro need not be a constant.
-+*/
-+/*
-+  Data is stored in an big-endian way.
-+*/
-+#define BYTES_BIG_ENDIAN 1
-+
-+/*
-+Define this macro to have the value 1 if, in a multiword object, the
-+most significant word has the lowest number.  This applies to both
-+memory locations and registers; GCC fundamentally assumes that the
-+order of words in memory is the same as the order in registers.  This
-+macro need not be a constant.
-+*/
-+/*
-+  Data is stored in an bin-endian way.
-+*/
-+#define WORDS_BIG_ENDIAN 1
-+
-+/*
-+Define this macro if WORDS_BIG_ENDIAN is not constant.  This must be a
-+constant value with the same meaning as WORDS_BIG_ENDIAN, which will be
-+used only when compiling libgcc2.c.  Typically the value will be set
-+based on preprocessor defines.
-+*/
-+#define LIBGCC2_WORDS_BIG_ENDIAN WORDS_BIG_ENDIAN
-+
-+/*
-+Define this macro to have the value 1 if DFmode, XFmode or
-+TFmode floating point numbers are stored in memory with the word
-+containing the sign bit at the lowest address; otherwise define it to
-+have the value 0.  This macro need not be a constant.
-+
-+You need not define this macro if the ordering is the same as for
-+multi-word integers.
-+*/
-+/* #define FLOAT_WORDS_BIG_ENDIAN 1 */
-+
-+/*
-+Define this macro to be the number of bits in an addressable storage
-+unit (byte); normally 8.
-+*/
-+#define BITS_PER_UNIT 8
-+
-+/*
-+Number of bits in a word; normally 32.
-+*/
-+#define BITS_PER_WORD 32
-+
-+/*
-+Maximum number of bits in a word.  If this is undefined, the default is
-+BITS_PER_WORD.  Otherwise, it is the constant value that is the
-+largest value that BITS_PER_WORD can have at run-time.
-+*/
-+/* MAX_BITS_PER_WORD not defined*/
-+
-+/*
-+Number of storage units in a word; normally 4.
-+*/
-+#define UNITS_PER_WORD 4
-+
-+/*
-+Minimum number of units in a word.  If this is undefined, the default is
-+UNITS_PER_WORD.  Otherwise, it is the constant value that is the
-+smallest value that UNITS_PER_WORD can have at run-time.
-+*/
-+/* MIN_UNITS_PER_WORD not defined */
-+
-+/*
-+Width of a pointer, in bits.  You must specify a value no wider than the
-+width of Pmode.  If it is not equal to the width of Pmode,
-+you must define POINTERS_EXTEND_UNSIGNED.
-+*/
-+#define POINTER_SIZE 32
-+
-+/*
-+A C expression whose value is greater than zero if pointers that need to be
-+extended from being POINTER_SIZE bits wide to Pmode are to
-+be zero-extended and zero if they are to be sign-extended.  If the value
-+is less then zero then there must be an "ptr_extend" instruction that
-+extends a pointer from POINTER_SIZE to Pmode.
-+
-+You need not define this macro if the POINTER_SIZE is equal
-+to the width of Pmode.
-+*/
-+/* #define POINTERS_EXTEND_UNSIGNED */
-+
-+/*
-+A Macro to update M and UNSIGNEDP when an object whose type
-+is TYPE and which has the specified mode and signedness is to be
-+stored in a register.  This macro is only called when TYPE is a
-+scalar type.
-+
-+On most RISC machines, which only have operations that operate on a full
-+register, define this macro to set M to word_mode if
-+M is an integer mode narrower than BITS_PER_WORD.  In most
-+cases, only integer modes should be widened because wider-precision
-+floating-point operations are usually more expensive than their narrower
-+counterparts.
-+
-+For most machines, the macro definition does not change UNSIGNEDP.
-+However, some machines, have instructions that preferentially handle
-+either signed or unsigned quantities of certain modes.  For example, on
-+the DEC Alpha, 32-bit loads from memory and 32-bit add instructions
-+sign-extend the result to 64 bits.  On such machines, set
-+UNSIGNEDP according to which kind of extension is more efficient.
-+
-+Do not define this macro if it would never modify M.
-+*/
-+#define PROMOTE_MODE(M, UNSIGNEDP, TYPE)	\
-+  do						\
-+    {						\
-+      if (GET_MODE_CLASS (M) == MODE_INT	\
-+	  && GET_MODE_SIZE (M) < 4)		\
-+	{					\
-+	  (M) = SImode;				\
-+	}					\
-+    }						\
-+  while (0)
-+
-+/* Define if operations between registers always perform the operation
-+   on the full register even if a narrower mode is specified.  */
-+#define WORD_REGISTER_OPERATIONS
-+
-+/* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
-+   will either zero-extend or sign-extend.  The value of this macro should
-+   be the code that says which one of the two operations is implicitly
-+   done, UNKNOWN if not known.  */
-+#define LOAD_EXTEND_OP(MODE)				\
-+   (((MODE) == QImode) ? ZERO_EXTEND			\
-+   : ((MODE) == HImode) ? SIGN_EXTEND : UNKNOWN)
-+
-+
-+/*
-+Define this macro if the promotion described by PROMOTE_MODE
-+should only be performed for outgoing function arguments or
-+function return values, as specified by PROMOTE_FUNCTION_ARGS
-+and PROMOTE_FUNCTION_RETURN, respectively.
-+*/
-+/* #define PROMOTE_FOR_CALL_ONLY */
-+
-+/*
-+Normal alignment required for function parameters on the stack, in
-+bits.  All stack parameters receive at least this much alignment
-+regardless of data type.  On most machines, this is the same as the
-+size of an integer.
-+*/
-+#define PARM_BOUNDARY 32
-+
-+/*
-+Define this macro to the minimum alignment enforced by hardware for the
-+stack pointer on this machine.  The definition is a C expression for the
-+desired alignment (measured in bits).  This value is used as a default
-+if PREFERRED_STACK_BOUNDARY is not defined.  On most machines,
-+this should be the same as PARM_BOUNDARY.
-+*/
-+#define STACK_BOUNDARY 32
-+
-+/*
-+Define this macro if you wish to preserve a certain alignment for the
-+stack pointer, greater than what the hardware enforces.  The definition
-+is a C expression for the desired alignment (measured in bits).  This
-+macro must evaluate to a value equal to or larger than
-+STACK_BOUNDARY.
-+*/
-+#define PREFERRED_STACK_BOUNDARY (TARGET_FORCE_DOUBLE_ALIGN ? 64 : 32 )
-+
-+/*
-+Alignment required for a function entry point, in bits.
-+*/
-+#define FUNCTION_BOUNDARY 16
-+
-+/*
-+Biggest alignment that any data type can require on this machine, in bits.
-+*/
-+#define BIGGEST_ALIGNMENT  (TARGET_FORCE_DOUBLE_ALIGN ? 64 : 32 )
-+
-+/*
-+If defined, the smallest alignment, in bits, that can be given to an
-+object that can be referenced in one operation, without disturbing any
-+nearby object.  Normally, this is BITS_PER_UNIT, but may be larger
-+on machines that don't have byte or half-word store operations.
-+*/
-+#define MINIMUM_ATOMIC_ALIGNMENT BITS_PER_UNIT
-+
-+
-+/*
-+An integer expression for the size in bits of the largest integer machine mode that
-+should actually be used. All integer machine modes of this size or smaller can be
-+used for structures and unions with the appropriate sizes. If this macro is undefined,
-+GET_MODE_BITSIZE (DImode) is assumed.*/
-+#define MAX_FIXED_MODE_SIZE  GET_MODE_BITSIZE (DImode)
-+
-+
-+/*
-+If defined, a C expression to compute the alignment given to a constant
-+that is being placed in memory.  CONSTANT is the constant and
-+BASIC_ALIGN is the alignment that the object would ordinarily
-+have.  The value of this macro is used instead of that alignment to
-+align the object.
-+
-+If this macro is not defined, then BASIC_ALIGN is used.
-+
-+The typical use of this macro is to increase alignment for string
-+constants to be word aligned so that strcpy calls that copy
-+constants can be done inline.
-+*/
-+#define CONSTANT_ALIGNMENT(CONSTANT, BASIC_ALIGN) \
-+ ((TREE_CODE(CONSTANT) == STRING_CST) ? BITS_PER_WORD : BASIC_ALIGN)
-+
-+/* Try to align string to a word. */
-+#define DATA_ALIGNMENT(TYPE, ALIGN)                                     \
-+  ({(TREE_CODE (TYPE) == ARRAY_TYPE                                     \
-+     && TYPE_MODE (TREE_TYPE (TYPE)) == QImode                          \
-+     && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN));})
-+
-+/* Try to align local store strings to a word. */
-+#define LOCAL_ALIGNMENT(TYPE, ALIGN)                                    \
-+  ({(TREE_CODE (TYPE) == ARRAY_TYPE                                     \
-+     && TYPE_MODE (TREE_TYPE (TYPE)) == QImode                          \
-+     && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN));})
-+
-+/*
-+Define this macro to be the value 1 if instructions will fail to work
-+if given data not on the nominal alignment.  If instructions will merely
-+go slower in that case, define this macro as 0.
-+*/
-+#define STRICT_ALIGNMENT 1
-+
-+/*
-+Define this if you wish to imitate the way many other C compilers handle
-+alignment of bit-fields and the structures that contain them.
-+
-+The behavior is that the type written for a bit-field (int,
-+short, or other integer type) imposes an alignment for the
-+entire structure, as if the structure really did contain an ordinary
-+field of that type.  In addition, the bit-field is placed within the
-+structure so that it would fit within such a field, not crossing a
-+boundary for it.
-+
-+Thus, on most machines, a bit-field whose type is written as int
-+would not cross a four-byte boundary, and would force four-byte
-+alignment for the whole structure.  (The alignment used may not be four
-+bytes; it is controlled by the other alignment parameters.)
-+
-+If the macro is defined, its definition should be a C expression;
-+a nonzero value for the expression enables this behavior.
-+
-+Note that if this macro is not defined, or its value is zero, some
-+bit-fields may cross more than one alignment boundary.  The compiler can
-+support such references if there are insv, extv, and
-+extzv insns that can directly reference memory.
-+
-+The other known way of making bit-fields work is to define
-+STRUCTURE_SIZE_BOUNDARY as large as BIGGEST_ALIGNMENT.
-+Then every structure can be accessed with fullwords.
-+
-+Unless the machine has bit-field instructions or you define
-+STRUCTURE_SIZE_BOUNDARY that way, you must define
-+PCC_BITFIELD_TYPE_MATTERS to have a nonzero value.
-+
-+If your aim is to make GCC use the same conventions for laying out
-+bit-fields as are used by another compiler, here is how to investigate
-+what the other compiler does.  Compile and run this program:
-+
-+struct foo1
-+{
-+  char x;
-+  char :0;
-+  char y;
-+};
-+
-+struct foo2
-+{
-+  char x;
-+  int :0;
-+  char y;
-+};
-+
-+main ()
-+{
-+  printf ("Size of foo1 is %d\n",
-+          sizeof (struct foo1));
-+  printf ("Size of foo2 is %d\n",
-+          sizeof (struct foo2));
-+  exit (0);
-+}
-+
-+If this prints 2 and 5, then the compiler's behavior is what you would
-+get from PCC_BITFIELD_TYPE_MATTERS.
-+*/
-+#define PCC_BITFIELD_TYPE_MATTERS 1
-+
-+
-+/******************************************************************************
-+ * Layout of Source Language Data Types
-+ *****************************************************************************/
-+
-+/*
-+A C expression for the size in bits of the type int on the
-+target machine.  If you don't define this, the default is one word.
-+*/
-+#define INT_TYPE_SIZE 32
-+
-+/*
-+A C expression for the size in bits of the type short on the
-+target machine.  If you don't define this, the default is half a word. (If
-+this would be less than one storage unit, it is rounded up to one unit.)
-+*/
-+#define SHORT_TYPE_SIZE 16
-+
-+/*
-+A C expression for the size in bits of the type long on the
-+target machine.  If you don't define this, the default is one word.
-+*/
-+#define LONG_TYPE_SIZE 32
-+
-+
-+/*
-+A C expression for the size in bits of the type long long on the
-+target machine.  If you don't define this, the default is two
-+words.  If you want to support GNU Ada on your machine, the value of this
-+macro must be at least 64.
-+*/
-+#define LONG_LONG_TYPE_SIZE 64
-+
-+/*
-+A C expression for the size in bits of the type char on the
-+target machine.  If you don't define this, the default is
-+BITS_PER_UNIT.
-+*/
-+#define CHAR_TYPE_SIZE 8
-+
-+
-+/*
-+A C expression for the size in bits of the C++ type bool and
-+C99 type _Bool on the target machine.  If you don't define
-+this, and you probably shouldn't, the default is CHAR_TYPE_SIZE.
-+*/
-+#define BOOL_TYPE_SIZE 8
-+
-+
-+/*
-+An expression whose value is 1 or 0, according to whether the type
-+char should be signed or unsigned by default.  The user can
-+always override this default with the options -fsigned-char
-+and -funsigned-char.
-+*/
-+/* We are using unsigned char */
-+#define DEFAULT_SIGNED_CHAR 0
-+
-+
-+/*
-+A C expression for a string describing the name of the data type to use
-+for size values.  The typedef name size_t is defined using the
-+contents of the string.
-+
-+The string can contain more than one keyword.  If so, separate them with
-+spaces, and write first any length keyword, then unsigned if
-+appropriate, and finally int.  The string must exactly match one
-+of the data type names defined in the function
-+init_decl_processing in the file c-decl.c.  You may not
-+omit int or change the order - that would cause the compiler to
-+crash on startup.
-+
-+If you don't define this macro, the default is "long unsigned int".
-+*/
-+#define SIZE_TYPE "long unsigned int"
-+
-+/*
-+A C expression for a string describing the name of the data type to use
-+for the result of subtracting two pointers.  The typedef name
-+ptrdiff_t is defined using the contents of the string.  See
-+SIZE_TYPE above for more information.
-+
-+If you don't define this macro, the default is "long int".
-+*/
-+#define PTRDIFF_TYPE "long int"
-+
-+
-+/*
-+A C expression for the size in bits of the data type for wide
-+characters.  This is used in cpp, which cannot make use of
-+WCHAR_TYPE.
-+*/
-+#define WCHAR_TYPE_SIZE 32
-+
-+
-+/*
-+A C expression for a string describing the name of the data type to
-+use for wide characters passed to printf and returned from
-+getwc.  The typedef name wint_t is defined using the
-+contents of the string.  See SIZE_TYPE above for more
-+information.
-+
-+If you don't define this macro, the default is "unsigned int".
-+*/
-+#define WINT_TYPE "unsigned int"
-+
-+/*
-+A C expression for a string describing the name of the data type that
-+can represent any value of any standard or extended signed integer type.
-+The typedef name intmax_t is defined using the contents of the
-+string.  See SIZE_TYPE above for more information.
-+
-+If you don't define this macro, the default is the first of
-+"int", "long int", or "long long int" that has as
-+much precision as long long int.
-+*/
-+#define INTMAX_TYPE "long long int"
-+
-+/*
-+A C expression for a string describing the name of the data type that
-+can represent any value of any standard or extended unsigned integer
-+type.  The typedef name uintmax_t is defined using the contents
-+of the string.  See SIZE_TYPE above for more information.
-+
-+If you don't define this macro, the default is the first of
-+"unsigned int", "long unsigned int", or "long long unsigned int"
-+that has as much precision as long long unsigned int.
-+*/
-+#define UINTMAX_TYPE "long long unsigned int"
-+
-+
-+/******************************************************************************
-+ * Register Usage
-+ *****************************************************************************/
-+
-+/* Convert from gcc internal register number to register number
-+   used in assembly code */
-+#define ASM_REGNUM(reg) (LAST_REGNUM - (reg))
-+#define ASM_FP_REGNUM(reg) (LAST_FP_REGNUM - (reg))
-+
-+/* Convert between register number used in assembly to gcc
-+   internal register number  */
-+#define INTERNAL_REGNUM(reg) (LAST_REGNUM - (reg))
-+#define INTERNAL_FP_REGNUM(reg) (LAST_FP_REGNUM - (reg))
-+
-+/** Basic Characteristics of Registers **/
-+
-+/*
-+Number of hardware registers known to the compiler.  They receive
-+numbers 0 through FIRST_PSEUDO_REGISTER-1; thus, the first
-+pseudo register's number really is assigned the number
-+FIRST_PSEUDO_REGISTER.
-+*/
-+#define FIRST_PSEUDO_REGISTER (LAST_FP_REGNUM + 1)
-+
-+#define FIRST_REGNUM 0
-+#define LAST_REGNUM 15
-+#define NUM_FP_REGS 16
-+#define FIRST_FP_REGNUM 16
-+#define LAST_FP_REGNUM (16+NUM_FP_REGS-1)
-+
-+/*
-+An initializer that says which registers are used for fixed purposes
-+all throughout the compiled code and are therefore not available for
-+general allocation.  These would include the stack pointer, the frame
-+pointer (except on machines where that can be used as a general
-+register when no frame pointer is needed), the program counter on
-+machines where that is considered one of the addressable registers,
-+and any other numbered register with a standard use.
-+
-+This information is expressed as a sequence of numbers, separated by
-+commas and surrounded by braces.  The nth number is 1 if
-+register n is fixed, 0 otherwise.
-+
-+The table initialized from this macro, and the table initialized by
-+the following one, may be overridden at run time either automatically,
-+by the actions of the macro CONDITIONAL_REGISTER_USAGE, or by
-+the user with the command options -ffixed-[reg],
-+-fcall-used-[reg] and -fcall-saved-[reg].
-+*/
-+
-+/* The internal gcc register numbers are reversed
-+   compared to the real register numbers since
-+   gcc expects data types stored over multiple
-+   registers in the register file to be big endian
-+   if the memory layout is big endian. But this
-+   is not the case for avr32 so we fake a big
-+   endian register file. */
-+
-+#define FIXED_REGISTERS {	\
-+  1, /* Program Counter */	\
-+  0, /* Link Register */	\
-+  1, /* Stack Pointer */	\
-+  0, /* r12 */			\
-+  0, /* r11 */			\
-+  0, /* r10 */			\
-+  0, /* r9 */			\
-+  0, /* r8 */			\
-+  0, /* r7 */			\
-+  0, /* r6 */			\
-+  0, /* r5 */			\
-+  0, /* r4 */			\
-+  0, /* r3 */			\
-+  0, /* r2 */			\
-+  0, /* r1 */			\
-+  0, /* r0 */			\
-+  0, /* f15 */			\
-+  0, /* f14 */			\
-+  0, /* f13 */			\
-+  0, /* f12 */			\
-+  0, /* f11 */			\
-+  0, /* f10 */			\
-+  0, /* f9 */			\
-+  0, /* f8 */			\
-+  0, /* f7 */			\
-+  0, /* f6 */			\
-+  0, /* f5 */			\
-+  0, /* f4 */			\
-+  0, /* f3 */			\
-+  0, /* f2*/			\
-+  0, /* f1 */			\
-+  0  /* f0 */			\
-+}
-+
-+/*
-+Like FIXED_REGISTERS but has 1 for each register that is
-+clobbered (in general) by function calls as well as for fixed
-+registers.  This macro therefore identifies the registers that are not
-+available for general allocation of values that must live across
-+function calls.
-+
-+If a register has 0 in CALL_USED_REGISTERS, the compiler
-+automatically saves it on function entry and restores it on function
-+exit, if the register is used within the function.
-+*/
-+#define CALL_USED_REGISTERS {	\
-+  1, /* Program Counter */	\
-+  0, /* Link Register */	\
-+  1, /* Stack Pointer */	\
-+  1, /* r12 */			\
-+  1, /* r11 */			\
-+  1, /* r10 */			\
-+  1, /* r9 */			\
-+  1, /* r8 */			\
-+  0, /* r7 */			\
-+  0, /* r6 */			\
-+  0, /* r5 */			\
-+  0, /* r4 */			\
-+  0, /* r3 */			\
-+  0, /* r2 */			\
-+  0, /* r1 */			\
-+  0, /* r0 */			\
-+  1, /* f15 */			\
-+  1, /* f14 */			\
-+  1, /* f13 */			\
-+  1, /* f12 */			\
-+  1, /* f11 */			\
-+  1, /* f10 */			\
-+  1, /* f9 */			\
-+  1, /* f8 */			\
-+  0, /* f7 */			\
-+  0, /* f6 */			\
-+  0, /* f5 */			\
-+  0, /* f4 */			\
-+  0, /* f3 */			\
-+  0, /* f2*/			\
-+  0, /* f1*/			\
-+  0, /* f0 */			\
-+}
-+
-+/* Interrupt functions can only use registers that have already been
-+   saved by the prologue, even if they would normally be
-+   call-clobbered.  */
-+#define HARD_REGNO_RENAME_OK(SRC, DST)					\
-+	(! IS_INTERRUPT (cfun->machine->func_type) ||			\
-+		regs_ever_live[DST])
-+
-+
-+/*
-+Zero or more C statements that may conditionally modify five variables
-+fixed_regs, call_used_regs, global_regs,
-+reg_names, and reg_class_contents, to take into account
-+any dependence of these register sets on target flags.  The first three
-+of these are of type char [] (interpreted as Boolean vectors).
-+global_regs is a const char *[], and
-+reg_class_contents is a HARD_REG_SET.  Before the macro is
-+called, fixed_regs, call_used_regs,
-+reg_class_contents, and reg_names have been initialized
-+from FIXED_REGISTERS, CALL_USED_REGISTERS,
-+REG_CLASS_CONTENTS, and REGISTER_NAMES, respectively.
-+global_regs has been cleared, and any -ffixed-[reg],
-+-fcall-used-[reg] and -fcall-saved-[reg]
-+command options have been applied.
-+
-+You need not define this macro if it has no work to do.
-+
-+If the usage of an entire class of registers depends on the target
-+flags, you may indicate this to GCC by using this macro to modify
-+fixed_regs and call_used_regs to 1 for each of the
-+registers in the classes which should not be used by GCC.  Also define
-+the macro REG_CLASS_FROM_LETTER to return NO_REGS if it
-+is called with a letter for a class that shouldn't be used.
-+
-+ (However, if this class is not included in GENERAL_REGS and all
-+of the insn patterns whose constraints permit this class are
-+controlled by target switches, then GCC will automatically avoid using
-+these registers when the target switches are opposed to them.)
-+*/
-+#define CONDITIONAL_REGISTER_USAGE                              \
-+  do								\
-+    {								\
-+      int regno;						\
-+								\
-+      if (TARGET_SOFT_FLOAT)			                \
-+	{							\
-+	  for (regno = FIRST_FP_REGNUM;				\
-+	       regno <= LAST_FP_REGNUM; ++regno)	        \
-+	    fixed_regs[regno] = call_used_regs[regno] = 1;	\
-+	}							\
-+      if (flag_pic)						\
-+	{							\
-+	  fixed_regs[PIC_OFFSET_TABLE_REGNUM] = 1;		\
-+	  call_used_regs[PIC_OFFSET_TABLE_REGNUM] = 1;		\
-+	}							\
-+    }								\
-+  while (0)
-+
-+
-+/*
-+If the program counter has a register number, define this as that
-+register number.  Otherwise, do not define it.
-+*/
-+
-+#define LAST_AVR32_REGNUM 16
-+
-+
-+/** Order of Allocation of Registers **/
-+
-+/*
-+If defined, an initializer for a vector of integers, containing the
-+numbers of hard registers in the order in which GCC should prefer
-+to use them (from most preferred to least).
-+
-+If this macro is not defined, registers are used lowest numbered first
-+(all else being equal).
-+
-+One use of this macro is on machines where the highest numbered
-+registers must always be saved and the save-multiple-registers
-+instruction supports only sequences of consecutive registers.  On such
-+machines, define REG_ALLOC_ORDER to be an initializer that lists
-+the highest numbered allocable register first.
-+*/
-+#define REG_ALLOC_ORDER 	\
-+{				\
-+  INTERNAL_REGNUM(8),		\
-+  INTERNAL_REGNUM(9),		\
-+  INTERNAL_REGNUM(10),		\
-+  INTERNAL_REGNUM(11),		\
-+  INTERNAL_REGNUM(12),		\
-+  LR_REGNUM,			\
-+  INTERNAL_REGNUM(7),		\
-+  INTERNAL_REGNUM(6),		\
-+  INTERNAL_REGNUM(5),		\
-+  INTERNAL_REGNUM(4),		\
-+  INTERNAL_REGNUM(3),		\
-+  INTERNAL_REGNUM(2),		\
-+  INTERNAL_REGNUM(1),		\
-+  INTERNAL_REGNUM(0),		\
-+  INTERNAL_FP_REGNUM(15),	\
-+  INTERNAL_FP_REGNUM(14),	\
-+  INTERNAL_FP_REGNUM(13),	\
-+  INTERNAL_FP_REGNUM(12),	\
-+  INTERNAL_FP_REGNUM(11),	\
-+  INTERNAL_FP_REGNUM(10),	\
-+  INTERNAL_FP_REGNUM(9),	\
-+  INTERNAL_FP_REGNUM(8),	\
-+  INTERNAL_FP_REGNUM(7),	\
-+  INTERNAL_FP_REGNUM(6),	\
-+  INTERNAL_FP_REGNUM(5),	\
-+  INTERNAL_FP_REGNUM(4),	\
-+  INTERNAL_FP_REGNUM(3),	\
-+  INTERNAL_FP_REGNUM(2),	\
-+  INTERNAL_FP_REGNUM(1),	\
-+  INTERNAL_FP_REGNUM(0),	\
-+  SP_REGNUM,           		\
-+  PC_REGNUM			\
-+}
-+
-+
-+/** How Values Fit in Registers **/
-+
-+/*
-+A C expression for the number of consecutive hard registers, starting
-+at register number REGNO, required to hold a value of mode
-+MODE.
-+
-+On a machine where all registers are exactly one word, a suitable
-+definition of this macro is
-+
-+#define HARD_REGNO_NREGS(REGNO, MODE)            \
-+   ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1)  \
-+    / UNITS_PER_WORD)
-+*/
-+#define HARD_REGNO_NREGS(REGNO, MODE) \
-+  ((unsigned int)((GET_MODE_SIZE(MODE) + UNITS_PER_WORD -1 ) / UNITS_PER_WORD))
-+
-+/*
-+A C expression that is nonzero if it is permissible to store a value
-+of mode MODE in hard register number REGNO (or in several
-+registers starting with that one).  For a machine where all registers
-+are equivalent, a suitable definition is
-+
-+  #define HARD_REGNO_MODE_OK(REGNO, MODE) 1
-+
-+You need not include code to check for the numbers of fixed registers,
-+because the allocation mechanism considers them to be always occupied.
-+
-+On some machines, double-precision values must be kept in even/odd
-+register pairs.  You can implement that by defining this macro to reject
-+odd register numbers for such modes.
-+
-+The minimum requirement for a mode to be OK in a register is that the
-+mov[mode] instruction pattern support moves between the
-+register and other hard register in the same class and that moving a
-+value into the register and back out not alter it.
-+
-+Since the same instruction used to move word_mode will work for
-+all narrower integer modes, it is not necessary on any machine for
-+HARD_REGNO_MODE_OK to distinguish between these modes, provided
-+you define patterns movhi, etc., to take advantage of this.  This
-+is useful because of the interaction between HARD_REGNO_MODE_OK
-+and MODES_TIEABLE_P; it is very desirable for all integer modes
-+to be tieable.
-+
-+Many machines have special registers for floating point arithmetic.
-+Often people assume that floating point machine modes are allowed only
-+in floating point registers.  This is not true.  Any registers that
-+can hold integers can safely hold a floating point machine
-+mode, whether or not floating arithmetic can be done on it in those
-+registers.  Integer move instructions can be used to move the values.
-+
-+On some machines, though, the converse is true: fixed-point machine
-+modes may not go in floating registers.  This is true if the floating
-+registers normalize any value stored in them, because storing a
-+non-floating value there would garble it.  In this case,
-+HARD_REGNO_MODE_OK should reject fixed-point machine modes in
-+floating registers.  But if the floating registers do not automatically
-+normalize, if you can store any bit pattern in one and retrieve it
-+unchanged without a trap, then any machine mode may go in a floating
-+register, so you can define this macro to say so.
-+
-+The primary significance of special floating registers is rather that
-+they are the registers acceptable in floating point arithmetic
-+instructions.  However, this is of no concern to
-+HARD_REGNO_MODE_OK.  You handle it by writing the proper
-+constraints for those instructions.
-+
-+On some machines, the floating registers are especially slow to access,
-+so that it is better to store a value in a stack frame than in such a
-+register if floating point arithmetic is not being done.  As long as the
-+floating registers are not in class GENERAL_REGS, they will not
-+be used unless some pattern's constraint asks for one.
-+*/
-+#define HARD_REGNO_MODE_OK(REGNO, MODE) avr32_hard_regno_mode_ok(REGNO, MODE)
-+
-+/*
-+A C expression that is nonzero if a value of mode
-+MODE1 is accessible in mode MODE2 without copying.
-+
-+If HARD_REGNO_MODE_OK(R, MODE1) and
-+HARD_REGNO_MODE_OK(R, MODE2) are always the same for
-+any R, then MODES_TIEABLE_P(MODE1, MODE2)
-+should be nonzero.  If they differ for any R, you should define
-+this macro to return zero unless some other mechanism ensures the
-+accessibility of the value in a narrower mode.
-+
-+You should define this macro to return nonzero in as many cases as
-+possible since doing so will allow GCC to perform better register
-+allocation.
-+*/
-+#define MODES_TIEABLE_P(MODE1, MODE2)  \
-+  (GET_MODE_CLASS (MODE1) == GET_MODE_CLASS (MODE2))
-+
-+
-+
-+/******************************************************************************
-+ * Register Classes
-+ *****************************************************************************/
-+
-+/*
-+An enumeral type that must be defined with all the register class names
-+as enumeral values.  NO_REGS must be first.  ALL_REGS
-+must be the last register class, followed by one more enumeral value,
-+LIM_REG_CLASSES, which is not a register class but rather
-+tells how many classes there are.
-+
-+Each register class has a number, which is the value of casting
-+the class name to type int.  The number serves as an index
-+in many of the tables described below.
-+*/
-+enum reg_class
-+{
-+  NO_REGS,
-+  GENERAL_REGS,
-+  FP_REGS,
-+  ALL_REGS,
-+  LIM_REG_CLASSES
-+};
-+
-+/*
-+The number of distinct register classes, defined as follows:
-+  #define N_REG_CLASSES (int) LIM_REG_CLASSES
-+*/
-+#define N_REG_CLASSES (int)LIM_REG_CLASSES
-+
-+/*
-+An initializer containing the names of the register classes as C string
-+constants.  These names are used in writing some of the debugging dumps.
-+*/
-+#define REG_CLASS_NAMES		\
-+{				\
-+  "NO_REGS",			\
-+  "GENERAL_REGS",		\
-+  "FLOATING_POINT_REGS",	\
-+  "ALL_REGS"			\
-+}
-+
-+/*
-+An initializer containing the contents of the register classes, as integers
-+which are bit masks.  The nth integer specifies the contents of class
-+n.  The way the integer mask is interpreted is that
-+register r is in the class if mask & (1 << r) is 1.
-+
-+When the machine has more than 32 registers, an integer does not suffice.
-+Then the integers are replaced by sub-initializers, braced groupings containing
-+several integers.  Each sub-initializer must be suitable as an initializer
-+for the type HARD_REG_SET which is defined in hard-reg-set.h.
-+In this situation, the first integer in each sub-initializer corresponds to
-+registers 0 through 31, the second integer to registers 32 through 63, and
-+so on.
-+*/
-+#define REG_CLASS_CONTENTS {		\
-+  {0x00000000}, /* NO_REGS */		\
-+  {0x0000FFFF}, /* GENERAL_REGS */	\
-+  {0xFFFF0000}, /* FP_REGS */		\
-+  {0x7FFFFFFF}, /* ALL_REGS */		\
-+}
-+
-+
-+/*
-+A C expression whose value is a register class containing hard register
-+REGNO.  In general there is more than one such class; choose a class
-+which is minimal, meaning that no smaller class also contains the
-+register.
-+*/
-+#define REGNO_REG_CLASS(REGNO) ((REGNO < 16) ? GENERAL_REGS : FP_REGS)
-+
-+/*
-+A macro whose definition is the name of the class to which a valid
-+base register must belong.  A base register is one used in an address
-+which is the register value plus a displacement.
-+*/
-+#define BASE_REG_CLASS GENERAL_REGS
-+
-+/*
-+This is a variation of the BASE_REG_CLASS macro which allows
-+the selection of a base register in a mode depenedent manner.  If
-+mode is VOIDmode then it should return the same value as
-+BASE_REG_CLASS.
-+*/
-+#define MODE_BASE_REG_CLASS(MODE) BASE_REG_CLASS
-+
-+/*
-+A macro whose definition is the name of the class to which a valid
-+index register must belong.  An index register is one used in an
-+address where its value is either multiplied by a scale factor or
-+added to another register (as well as added to a displacement).
-+*/
-+#define INDEX_REG_CLASS BASE_REG_CLASS
-+
-+/*
-+A C expression which defines the machine-dependent operand constraint
-+letters for register classes.  If CHAR is such a letter, the
-+value should be the register class corresponding to it.  Otherwise,
-+the value should be NO_REGS.  The register letter r,
-+corresponding to class GENERAL_REGS, will not be passed
-+to this macro; you do not need to handle it.
-+*/
-+#define REG_CLASS_FROM_LETTER(CHAR) ((CHAR) == 'f' ? FP_REGS : NO_REGS)
-+
-+
-+/* These assume that REGNO is a hard or pseudo reg number.
-+   They give nonzero only if REGNO is a hard reg of the suitable class
-+   or a pseudo reg currently allocated to a suitable hard reg.
-+   Since they use reg_renumber, they are safe only once reg_renumber
-+   has been allocated, which happens in local-alloc.c.  */
-+#define TEST_REGNO(R, TEST, VALUE) \
-+  ((R TEST VALUE) || ((unsigned) reg_renumber[R] TEST VALUE))
-+
-+/*
-+A C expression which is nonzero if register number num is suitable for use as a base
-+register in operand addresses. It may be either a suitable hard register or a pseudo
-+register that has been allocated such a hard register.
-+*/
-+#define REGNO_OK_FOR_BASE_P(NUM)  TEST_REGNO(NUM, <=, LAST_REGNUM)
-+
-+/*
-+A C expression which is nonzero if register number NUM is
-+suitable for use as an index register in operand addresses.  It may be
-+either a suitable hard register or a pseudo register that has been
-+allocated such a hard register.
-+
-+The difference between an index register and a base register is that
-+the index register may be scaled.  If an address involves the sum of
-+two registers, neither one of them scaled, then either one may be
-+labeled the ``base'' and the other the ``index''; but whichever
-+labeling is used must fit the machine's constraints of which registers
-+may serve in each capacity.  The compiler will try both labelings,
-+looking for one that is valid, and will reload one or both registers
-+only if neither labeling works.
-+*/
-+#define REGNO_OK_FOR_INDEX_P(NUM) TEST_REGNO(NUM, <=, LAST_REGNUM)
-+
-+/*
-+A C expression that places additional restrictions on the register class
-+to use when it is necessary to copy value X into a register in class
-+CLASS.  The value is a register class; perhaps CLASS, or perhaps
-+another, smaller class.  On many machines, the following definition is
-+safe: #define PREFERRED_RELOAD_CLASS(X,CLASS) CLASS
-+
-+Sometimes returning a more restrictive class makes better code.  For
-+example, on the 68000, when X is an integer constant that is in range
-+for a 'moveq' instruction, the value of this macro is always
-+DATA_REGS as long as CLASS includes the data registers.
-+Requiring a data register guarantees that a 'moveq' will be used.
-+
-+If X is a const_double, by returning NO_REGS
-+you can force X into a memory constant.  This is useful on
-+certain machines where immediate floating values cannot be loaded into
-+certain kinds of registers.
-+*/
-+#define PREFERRED_RELOAD_CLASS(X, CLASS)  CLASS
-+
-+
-+
-+/*
-+A C expression for the maximum number of consecutive registers
-+of class CLASS needed to hold a value of mode MODE.
-+
-+This is closely related to the macro HARD_REGNO_NREGS.  In fact,
-+the value of the macro CLASS_MAX_NREGS(CLASS, MODE)
-+should be the maximum value of HARD_REGNO_NREGS(REGNO, MODE)
-+for all REGNO values in the class CLASS.
-+
-+This macro helps control the handling of multiple-word values
-+in the reload pass.
-+*/
-+#define CLASS_MAX_NREGS(CLASS, MODE) /* ToDo:fixme */ \
-+  (unsigned int)((GET_MODE_SIZE(MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
-+
-+
-+/*
-+  Using CONST_OK_FOR_CONSTRAINT_P instead of CONS_OK_FOR_LETTER_P
-+  in order to support constraints with more than one letter.
-+  Only two letters are then used for constant constraints,
-+  the letter 'K' and the letter 'I'. The constraint starting with
-+  these letters must consist of four characters. The character following
-+  'K' or 'I' must be either 'u' (unsigned) or 's' (signed) to specify
-+  if the constant is zero or sign extended. The last two characters specify
-+  the length in bits of the constant. The base constraint letter 'I' means
-+  that this is an negated constant, meaning that actually -VAL should be
-+  checked to lie withing the valid range instead of VAL which is used when
-+  'K' is the base constraint letter.
-+
-+*/
-+
-+#define CONSTRAINT_LEN(C, STR)				\
-+  ( ((C) == 'K' || (C) == 'I') ?  4 :			\
-+    ((C) == 'R') ?  5 :					\
-+    ((C) == 'N' || (C) == 'O' ||			\
-+     (C) == 'P' || (C) == 'L' || (C) == 'J') ? -1 :	\
-+    DEFAULT_CONSTRAINT_LEN((C), (STR)) )
-+
-+#define CONST_OK_FOR_CONSTRAINT_P(VALUE, C, STR)	\
-+  avr32_const_ok_for_constraint_p(VALUE, C, STR)
-+
-+/*
-+A C expression that defines the machine-dependent operand constraint
-+letters that specify particular ranges of const_double values ('G' or 'H').
-+
-+If C is one of those letters, the expression should check that
-+VALUE, an RTX of code const_double, is in the appropriate
-+range and return 1 if so, 0 otherwise.  If C is not one of those
-+letters, the value should be 0 regardless of VALUE.
-+
-+const_double is used for all floating-point constants and for
-+DImode fixed-point constants.  A given letter can accept either
-+or both kinds of values.  It can use GET_MODE to distinguish
-+between these kinds.
-+*/
-+#define CONST_DOUBLE_OK_FOR_LETTER_P(OP, C) \
-+  ((C) == 'G' ? avr32_const_double_immediate(OP) : 0)
-+
-+/*
-+A C expression that defines the optional machine-dependent constraint
-+letters that can be used to segregate specific types of operands, usually
-+memory references, for the target machine.  Any letter that is not
-+elsewhere defined and not matched by REG_CLASS_FROM_LETTER
-+may be used.  Normally this macro will not be defined.
-+
-+If it is required for a particular target machine, it should return 1
-+if VALUE corresponds to the operand type represented by the
-+constraint letter C.  If C is not defined as an extra
-+constraint, the value returned should be 0 regardless of VALUE.
-+
-+For example, on the ROMP, load instructions cannot have their output
-+in r0 if the memory reference contains a symbolic address.  Constraint
-+letter 'Q' is defined as representing a memory address that does
-+not contain a symbolic address.  An alternative is specified with
-+a 'Q' constraint on the input and 'r' on the output.  The next
-+alternative specifies 'm' on the input and a register class that
-+does not include r0 on the output.
-+*/
-+#define EXTRA_CONSTRAINT_STR(OP, C, STR)				\
-+  ((C) == 'W' ? avr32_address_operand(OP, GET_MODE(OP)) :		\
-+   (C) == 'R' ? (avr32_indirect_register_operand(OP, GET_MODE(OP)) ||	\
-+                 (avr32_imm_disp_memory_operand(OP, GET_MODE(OP))	\
-+                  && avr32_const_ok_for_constraint_p(			\
-+				INTVAL(XEXP(XEXP(OP, 0), 1)),		\
-+				(STR)[1], &(STR)[1]))) :		\
-+   (C) == 'S' ? avr32_indexed_memory_operand(OP, GET_MODE(OP)) :	\
-+   (C) == 'T' ? avr32_const_pool_ref_operand(OP, GET_MODE(OP)) :	\
-+   (C) == 'U' ? SYMBOL_REF_RCALL_FUNCTION_P(OP) :			\
-+   (C) == 'Z' ? avr32_cop_memory_operand(OP, GET_MODE(OP)) :		\
-+   0)
-+
-+
-+#define EXTRA_MEMORY_CONSTRAINT(C, STR) ( ((C) == 'R') ||               \
-+                                          ((C) == 'S') ||               \
-+                                          ((C) == 'Z') )
-+
-+
-+/* Returns nonzero if op is a function SYMBOL_REF which
-+   can be called using an rcall instruction */
-+#define SYMBOL_REF_RCALL_FUNCTION_P(op)  \
-+  ( GET_CODE(op) == SYMBOL_REF           \
-+    && SYMBOL_REF_FUNCTION_P(op)         \
-+    && SYMBOL_REF_LOCAL_P(op)            \
-+    && !SYMBOL_REF_EXTERNAL_P(op)        \
-+    && !TARGET_HAS_ASM_ADDR_PSEUDOS )
-+
-+/******************************************************************************
-+ * Stack Layout and Calling Conventions
-+ *****************************************************************************/
-+
-+/** Basic Stack Layout **/
-+
-+/*
-+Define this macro if pushing a word onto the stack moves the stack
-+pointer to a smaller address.
-+
-+When we say, ``define this macro if ...,'' it means that the
-+compiler checks this macro only with #ifdef so the precise
-+definition used does not matter.
-+*/
-+/* pushm decrece SP: *(--SP) <-- Rx */
-+#define STACK_GROWS_DOWNWARD
-+
-+/*
-+This macro defines the operation used when something is pushed
-+on the stack.  In RTL, a push operation will be
-+(set (mem (STACK_PUSH_CODE (reg sp))) ...)
-+
-+The choices are PRE_DEC, POST_DEC, PRE_INC,
-+and POST_INC.  Which of these is correct depends on
-+the stack direction and on whether the stack pointer points
-+to the last item on the stack or whether it points to the
-+space for the next item on the stack.
-+
-+The default is PRE_DEC when STACK_GROWS_DOWNWARD is
-+defined, which is almost always right, and PRE_INC otherwise,
-+which is often wrong.
-+*/
-+/* pushm: *(--SP) <-- Rx */
-+#define STACK_PUSH_CODE PRE_DEC
-+
-+/* Define this to nonzero if the nominal address of the stack frame
-+   is at the high-address end of the local variables;
-+   that is, each additional local variable allocated
-+   goes at a more negative offset in the frame.  */
-+#define FRAME_GROWS_DOWNWARD 1
-+
-+
-+/*
-+Offset from the frame pointer to the first local variable slot to be allocated.
-+
-+If FRAME_GROWS_DOWNWARD, find the next slot's offset by
-+subtracting the first slot's length from STARTING_FRAME_OFFSET.
-+Otherwise, it is found by adding the length of the first slot to the
-+value STARTING_FRAME_OFFSET.
-+  (i'm not sure if the above is still correct.. had to change it to get
-+   rid of an overfull.  --mew 2feb93 )
-+*/
-+#define STARTING_FRAME_OFFSET 0
-+
-+/*
-+Offset from the stack pointer register to the first location at which
-+outgoing arguments are placed.  If not specified, the default value of
-+zero is used.  This is the proper value for most machines.
-+
-+If ARGS_GROW_DOWNWARD, this is the offset to the location above
-+the first location at which outgoing arguments are placed.
-+*/
-+#define STACK_POINTER_OFFSET 0
-+
-+/*
-+Offset from the argument pointer register to the first argument's
-+address.  On some machines it may depend on the data type of the
-+function.
-+
-+If ARGS_GROW_DOWNWARD, this is the offset to the location above
-+the first argument's address.
-+*/
-+#define FIRST_PARM_OFFSET(FUNDECL) 0
-+
-+
-+/*
-+A C expression whose value is RTL representing the address in a stack
-+frame where the pointer to the caller's frame is stored.  Assume that
-+FRAMEADDR is an RTL expression for the address of the stack frame
-+itself.
-+
-+If you don't define this macro, the default is to return the value
-+of FRAMEADDR - that is, the stack frame address is also the
-+address of the stack word that points to the previous frame.
-+*/
-+#define DYNAMIC_CHAIN_ADDRESS(FRAMEADDR) plus_constant ((FRAMEADDR), 4)
-+
-+
-+/*
-+A C expression whose value is RTL representing the value of the return
-+address for the frame COUNT steps up from the current frame, after
-+the prologue.  FRAMEADDR is the frame pointer of the COUNT
-+frame, or the frame pointer of the COUNT - 1 frame if
-+RETURN_ADDR_IN_PREVIOUS_FRAME is defined.
-+
-+The value of the expression must always be the correct address when
-+COUNT is zero, but may be NULL_RTX if there is not way to
-+determine the return address of other frames.
-+*/
-+#define RETURN_ADDR_RTX(COUNT, FRAMEADDR) avr32_return_addr(COUNT, FRAMEADDR)
-+
-+
-+/*
-+A C expression whose value is RTL representing the location of the
-+incoming return address at the beginning of any function, before the
-+prologue.  This RTL is either a REG, indicating that the return
-+value is saved in 'REG', or a MEM representing a location in
-+the stack.
-+
-+You only need to define this macro if you want to support call frame
-+debugging information like that provided by DWARF 2.
-+
-+If this RTL is a REG, you should also define
-+DWARF_FRAME_RETURN_COLUMN to DWARF_FRAME_REGNUM (REGNO).
-+*/
-+#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LR_REGNUM)
-+
-+
-+
-+/*
-+A C expression whose value is an integer giving the offset, in bytes,
-+from the value of the stack pointer register to the top of the stack
-+frame at the beginning of any function, before the prologue.  The top of
-+the frame is defined to be the value of the stack pointer in the
-+previous frame, just before the call instruction.
-+
-+You only need to define this macro if you want to support call frame
-+debugging information like that provided by DWARF 2.
-+*/
-+#define INCOMING_FRAME_SP_OFFSET 0
-+
-+
-+/** Exception Handling Support **/
-+
-+#define DWARF2_UNWIND_INFO 1
-+
-+/*
-+A C expression whose value is the Nth register number used for
-+data by exception handlers, or INVALID_REGNUM if fewer than
-+N registers are usable.
-+
-+The exception handling library routines communicate with the exception
-+handlers via a set of agreed upon registers.  Ideally these registers
-+should be call-clobbered; it is possible to use call-saved registers,
-+but may negatively impact code size.  The target must support at least
-+2 data registers, but should define 4 if there are enough free registers.
-+
-+You must define this macro if you want to support call frame exception
-+handling like that provided by DWARF 2.
-+*/
-+/*
-+  Use r8-r11
-+*/
-+#define EH_RETURN_DATA_REGNO(N)					\
-+  ((N) < 4 ? INTERNAL_REGNUM((N) + 8U) : INVALID_REGNUM)
-+
-+/*
-+A C expression whose value is RTL representing a location in which
-+to store a stack adjustment to be applied before function return.
-+This is used to unwind the stack to an exception handler's call frame.
-+It will be assigned zero on code paths that return normally.
-+
-+Typically this is a call-clobbered hard register that is otherwise
-+untouched by the epilogue, but could also be a stack slot.
-+
-+You must define this macro if you want to support call frame exception
-+handling like that provided by DWARF 2.
-+*/
-+/*
-+  I don't think functions that may throw exceptions can ever be leaf
-+  functions, so we may safely use LR for this.
-+*/
-+#define EH_RETURN_STACKADJ_REGNO LR_REGNUM
-+#define EH_RETURN_STACKADJ_RTX gen_rtx_REG(SImode, EH_RETURN_STACKADJ_REGNO)
-+
-+/*
-+A C expression whose value is RTL representing a location in which
-+to store the address of an exception handler to which we should
-+return.  It will not be assigned on code paths that return normally.
-+
-+Typically this is the location in the call frame at which the normal
-+return address is stored.  For targets that return by popping an
-+address off the stack, this might be a memory address just below
-+the target call frame rather than inside the current call
-+frame.  EH_RETURN_STACKADJ_RTX will have already been assigned,
-+so it may be used to calculate the location of the target call frame.
-+
-+Some targets have more complex requirements than storing to an
-+address calculable during initial code generation.  In that case
-+the eh_return instruction pattern should be used instead.
-+
-+If you want to support call frame exception handling, you must
-+define either this macro or the eh_return instruction pattern.
-+*/
-+/*
-+  We define the eh_return instruction pattern, so this isn't needed.
-+*/
-+/* #define EH_RETURN_HANDLER_RTX gen_rtx_REG(Pmode, RET_REGISTER) */
-+
-+/*
-+  This macro chooses the encoding of pointers embedded in the
-+  exception handling sections. If at all possible, this should be
-+  defined such that the exception handling section will not require
-+  dynamic relocations, and so may be read-only.
-+
-+  code is 0 for data, 1 for code labels, 2 for function
-+  pointers. global is true if the symbol may be affected by dynamic
-+  relocations. The macro should return a combination of the DW_EH_PE_*
-+  defines as found in dwarf2.h.
-+
-+  If this macro is not defined, pointers will not be encoded but
-+  represented directly.
-+*/
-+#define ASM_PREFERRED_EH_DATA_FORMAT(CODE, GLOBAL)	\
-+  ((flag_pic && (GLOBAL) ? DW_EH_PE_indirect : 0)	\
-+   | (flag_pic ? DW_EH_PE_pcrel : DW_EH_PE_absptr)	\
-+   | DW_EH_PE_sdata4)
-+
-+/* ToDo: The rest of this subsection */
-+
-+/** Specifying How Stack Checking is Done **/
-+/* ToDo: All in this subsection */
-+
-+/** Registers That Address the Stack Frame **/
-+
-+/*
-+The register number of the stack pointer register, which must also be a
-+fixed register according to FIXED_REGISTERS.  On most machines,
-+the hardware determines which register this is.
-+*/
-+/* Using r13 as stack pointer. */
-+#define STACK_POINTER_REGNUM INTERNAL_REGNUM(13)
-+
-+/*
-+The register number of the frame pointer register, which is used to
-+access automatic variables in the stack frame.  On some machines, the
-+hardware determines which register this is.  On other machines, you can
-+choose any register you wish for this purpose.
-+*/
-+/* Use r7 */
-+#define FRAME_POINTER_REGNUM INTERNAL_REGNUM(7)
-+
-+
-+
-+/*
-+The register number of the arg pointer register, which is used to access
-+the function's argument list.  On some machines, this is the same as the
-+frame pointer register.  On some machines, the hardware determines which
-+register this is.  On other machines, you can choose any register you
-+wish for this purpose.  If this is not the same register as the frame
-+pointer register, then you must mark it as a fixed register according to
-+FIXED_REGISTERS, or arrange to be able to eliminate it (see Section
-+10.10.5 [Elimination], page 224).
-+*/
-+/* Using r5 */
-+#define ARG_POINTER_REGNUM INTERNAL_REGNUM(4)
-+
-+
-+/*
-+Register numbers used for passing a function's static chain pointer.  If
-+register windows are used, the register number as seen by the called
-+function is STATIC_CHAIN_INCOMING_REGNUM, while the register
-+number as seen by the calling function is STATIC_CHAIN_REGNUM.  If
-+these registers are the same, STATIC_CHAIN_INCOMING_REGNUM need
-+not be defined.
-+
-+The static chain register need not be a fixed register.
-+
-+If the static chain is passed in memory, these macros should not be
-+defined; instead, the next two macros should be defined.
-+*/
-+/* Using r0 */
-+#define STATIC_CHAIN_REGNUM INTERNAL_REGNUM(0)
-+
-+
-+/** Eliminating Frame Pointer and Arg Pointer **/
-+
-+/*
-+A C expression which is nonzero if a function must have and use a frame
-+pointer.  This expression is evaluated  in the reload pass.  If its value is
-+nonzero the function will have a frame pointer.
-+
-+The expression can in principle examine the current function and decide
-+according to the facts, but on most machines the constant 0 or the
-+constant 1 suffices.  Use 0 when the machine allows code to be generated
-+with no frame pointer, and doing so saves some time or space.  Use 1
-+when there is no possible advantage to avoiding a frame pointer.
-+
-+In certain cases, the compiler does not know how to produce valid code
-+without a frame pointer.  The compiler recognizes those cases and
-+automatically gives the function a frame pointer regardless of what
-+FRAME_POINTER_REQUIRED says.  You don't need to worry about
-+them.
-+
-+In a function that does not require a frame pointer, the frame pointer
-+register can be allocated for ordinary usage, unless you mark it as a
-+fixed register.  See FIXED_REGISTERS for more information.
-+*/
-+/* We need the frame pointer when compiling for profiling */
-+#define FRAME_POINTER_REQUIRED (current_function_profile)
-+
-+/*
-+A C statement to store in the variable DEPTH_VAR the difference
-+between the frame pointer and the stack pointer values immediately after
-+the function prologue.  The value would be computed from information
-+such as the result of get_frame_size () and the tables of
-+registers regs_ever_live and call_used_regs.
-+
-+If ELIMINABLE_REGS is defined, this macro will be not be used and
-+need not be defined.  Otherwise, it must be defined even if
-+FRAME_POINTER_REQUIRED is defined to always be true; in that
-+case, you may set DEPTH_VAR to anything.
-+*/
-+#define INITIAL_FRAME_POINTER_OFFSET(DEPTH_VAR) ((DEPTH_VAR) = get_frame_size())
-+
-+/*
-+If defined, this macro specifies a table of register pairs used to
-+eliminate unneeded registers that point into the stack frame.  If it is not
-+defined, the only elimination attempted by the compiler is to replace
-+references to the frame pointer with references to the stack pointer.
-+
-+The definition of this macro is a list of structure initializations, each
-+of which specifies an original and replacement register.
-+
-+On some machines, the position of the argument pointer is not known until
-+the compilation is completed.  In such a case, a separate hard register
-+must be used for the argument pointer.  This register can be eliminated by
-+replacing it with either the frame pointer or the argument pointer,
-+depending on whether or not the frame pointer has been eliminated.
-+
-+In this case, you might specify:
-+  #define ELIMINABLE_REGS  \
-+  {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
-+   {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
-+   {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}}
-+
-+Note that the elimination of the argument pointer with the stack pointer is
-+specified first since that is the preferred elimination.
-+*/
-+#define ELIMINABLE_REGS					\
-+{							\
-+  { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM },	\
-+  { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM },		\
-+  { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM }		\
-+}
-+
-+/*
-+A C expression that returns nonzero if the compiler is allowed to try
-+to replace register number FROM with register number
-+TO.  This macro need only be defined if ELIMINABLE_REGS
-+is defined, and will usually be the constant 1, since most of the cases
-+preventing register elimination are things that the compiler already
-+knows about.
-+*/
-+#define CAN_ELIMINATE(FROM, TO) 1
-+
-+/*
-+This macro is similar to INITIAL_FRAME_POINTER_OFFSET.  It
-+specifies the initial difference between the specified pair of
-+registers.  This macro must be defined if ELIMINABLE_REGS is
-+defined.
-+*/
-+#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET)		\
-+  ((OFFSET) = avr32_initial_elimination_offset(FROM, TO))
-+
-+/** Passing Function Arguments on the Stack **/
-+
-+
-+/*
-+A C expression.  If nonzero, push insns will be used to pass
-+outgoing arguments.
-+If the target machine does not have a push instruction, set it to zero.
-+That directs GCC to use an alternate strategy: to
-+allocate the entire argument block and then store the arguments into
-+it.  When PUSH_ARGS is nonzero, PUSH_ROUNDING must be defined too.
-+*/
-+#define PUSH_ARGS 1
-+
-+
-+/*
-+A C expression that is the number of bytes actually pushed onto the
-+stack when an instruction attempts to push NPUSHED bytes.
-+
-+On some machines, the definition
-+
-+  #define PUSH_ROUNDING(BYTES) (BYTES)
-+
-+will suffice.  But on other machines, instructions that appear
-+to push one byte actually push two bytes in an attempt to maintain
-+alignment.  Then the definition should be
-+
-+  #define PUSH_ROUNDING(BYTES) (((BYTES) + 1) & ~1)
-+*/
-+/* Push 4 bytes at the time. */
-+#define PUSH_ROUNDING(NPUSHED) (((NPUSHED) + 3) & ~3)
-+
-+/*
-+A C expression.  If nonzero, the maximum amount of space required for
-+outgoing arguments will be computed and placed into the variable
-+current_function_outgoing_args_size.  No space will be pushed
-+onto the stack for each call; instead, the function prologue should
-+increase the stack frame size by this amount.
-+
-+Setting both PUSH_ARGS and ACCUMULATE_OUTGOING_ARGS is not proper.
-+*/
-+#define ACCUMULATE_OUTGOING_ARGS 0
-+
-+
-+
-+
-+/*
-+A C expression that should indicate the number of bytes of its own
-+arguments that a function pops on returning, or 0 if the
-+function pops no arguments and the caller must therefore pop them all
-+after the function returns.
-+
-+FUNDECL is a C variable whose value is a tree node that describes
-+the function in question.  Normally it is a node of type
-+FUNCTION_DECL that describes the declaration of the function.
-+From this you can obtain the DECL_ATTRIBUTES of the function.
-+
-+FUNTYPE is a C variable whose value is a tree node that
-+describes the function in question.  Normally it is a node of type
-+FUNCTION_TYPE that describes the data type of the function.
-+From this it is possible to obtain the data types of the value and
-+arguments (if known).
-+
-+When a call to a library function is being considered, FUNDECL
-+will contain an identifier node for the library function.  Thus, if
-+you need to distinguish among various library functions, you can do so
-+by their names.  Note that ``library function'' in this context means
-+a function used to perform arithmetic, whose name is known specially
-+in the compiler and was not mentioned in the C code being compiled.
-+
-+STACK_SIZE is the number of bytes of arguments passed on the
-+stack.  If a variable number of bytes is passed, it is zero, and
-+argument popping will always be the responsibility of the calling function.
-+
-+On the VAX, all functions always pop their arguments, so the definition
-+of this macro is STACK_SIZE.  On the 68000, using the standard
-+calling convention, no functions pop their arguments, so the value of
-+the macro is always 0 in this case.  But an alternative calling
-+convention is available in which functions that take a fixed number of
-+arguments pop them but other functions (such as printf) pop
-+nothing (the caller pops all).  When this convention is in use,
-+FUNTYPE is examined to determine whether a function takes a fixed
-+number of arguments.
-+*/
-+#define RETURN_POPS_ARGS(FUNDECL, FUNTYPE, STACK_SIZE) 0
-+
-+
-+/*Return true if this function can we use a single return instruction*/
-+#define USE_RETURN_INSN(ISCOND) avr32_use_return_insn(ISCOND)
-+
-+/*
-+A C expression that should indicate the number of bytes a call sequence
-+pops off the stack.  It is added to the value of RETURN_POPS_ARGS
-+when compiling a function call.
-+
-+CUM is the variable in which all arguments to the called function
-+have been accumulated.
-+
-+On certain architectures, such as the SH5, a call trampoline is used
-+that pops certain registers off the stack, depending on the arguments
-+that have been passed to the function.  Since this is a property of the
-+call site, not of the called function, RETURN_POPS_ARGS is not
-+appropriate.
-+*/
-+#define CALL_POPS_ARGS(CUM) 0
-+
-+/* Passing Arguments in Registers */
-+
-+/*
-+A C expression that controls whether a function argument is passed
-+in a register, and which register.
-+
-+The arguments are CUM, which summarizes all the previous
-+arguments; MODE, the machine mode of the argument; TYPE,
-+the data type of the argument as a tree node or 0 if that is not known
-+(which happens for C support library functions); and NAMED,
-+which is 1 for an ordinary argument and 0 for nameless arguments that
-+correspond to '...' in the called function's prototype.
-+TYPE can be an incomplete type if a syntax error has previously
-+occurred.
-+
-+The value of the expression is usually either a reg RTX for the
-+hard register in which to pass the argument, or zero to pass the
-+argument on the stack.
-+
-+For machines like the VAX and 68000, where normally all arguments are
-+pushed, zero suffices as a definition.
-+
-+The value of the expression can also be a parallel RTX.  This is
-+used when an argument is passed in multiple locations.  The mode of the
-+of the parallel should be the mode of the entire argument.  The
-+parallel holds any number of expr_list pairs; each one
-+describes where part of the argument is passed.  In each
-+expr_list the first operand must be a reg RTX for the hard
-+register in which to pass this part of the argument, and the mode of the
-+register RTX indicates how large this part of the argument is.  The
-+second operand of the expr_list is a const_int which gives
-+the offset in bytes into the entire argument of where this part starts.
-+As a special exception the first expr_list in the parallel
-+RTX may have a first operand of zero.  This indicates that the entire
-+argument is also stored on the stack.
-+
-+The last time this macro is called, it is called with MODE == VOIDmode,
-+and its result is passed to the call or call_value
-+pattern as operands 2 and 3 respectively.
-+
-+The usual way to make the ISO library 'stdarg.h' work on a machine
-+where some arguments are usually passed in registers, is to cause
-+nameless arguments to be passed on the stack instead.  This is done
-+by making FUNCTION_ARG return 0 whenever NAMED is 0.
-+
-+You may use the macro MUST_PASS_IN_STACK (MODE, TYPE)
-+in the definition of this macro to determine if this argument is of a
-+type that must be passed in the stack.  If REG_PARM_STACK_SPACE
-+is not defined and FUNCTION_ARG returns nonzero for such an
-+argument, the compiler will abort.  If REG_PARM_STACK_SPACE is
-+defined, the argument will be computed in the stack and then loaded into
-+a register.  */
-+
-+#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
-+  avr32_function_arg(&(CUM), MODE, TYPE, NAMED)
-+
-+
-+
-+
-+/*
-+A C type for declaring a variable that is used as the first argument of
-+FUNCTION_ARG and other related values.  For some target machines,
-+the type int suffices and can hold the number of bytes of
-+argument so far.
-+
-+There is no need to record in CUMULATIVE_ARGS anything about the
-+arguments that have been passed on the stack.  The compiler has other
-+variables to keep track of that.  For target machines on which all
-+arguments are passed on the stack, there is no need to store anything in
-+CUMULATIVE_ARGS; however, the data structure must exist and
-+should not be empty, so use int.
-+*/
-+typedef struct avr32_args
-+{
-+  /* Index representing the argument register the current function argument
-+     will occupy */
-+  int index;
-+  /* A mask with bits representing the argument registers: if a bit is set
-+     then this register is used for an arguemnt */
-+  int used_index;
-+  /* TRUE if this function has anonymous arguments */
-+  int uses_anonymous_args;
-+  /* The size in bytes of the named arguments pushed on the stack */
-+  int stack_pushed_args_size;
-+  /* Set to true if this function needs a Return Value Pointer */
-+  int use_rvp;
-+
-+} CUMULATIVE_ARGS;
-+
-+
-+#define FIRST_CUM_REG_INDEX 0
-+#define LAST_CUM_REG_INDEX 4
-+#define GET_REG_INDEX(CUM) ((CUM)->index)
-+#define SET_REG_INDEX(CUM, INDEX) ((CUM)->index = (INDEX));
-+#define GET_USED_INDEX(CUM, INDEX) ((CUM)->used_index & (1 << (INDEX)))
-+#define SET_USED_INDEX(CUM, INDEX)		\
-+  do						\
-+    {						\
-+      if (INDEX >= 0)				\
-+        (CUM)->used_index |= (1 << (INDEX));	\
-+    }						\
-+  while (0)
-+#define SET_INDEXES_UNUSED(CUM) ((CUM)->used_index = 0)
-+
-+
-+/*
-+   A C statement (sans semicolon) for initializing the variable cum for the
-+   state at the beginning of the argument list. The variable has type
-+   CUMULATIVE_ARGS. The value of FNTYPE is the tree node for the data type of
-+   the function which will receive the args, or 0 if the args are to a compiler
-+   support library function. For direct calls that are not libcalls, FNDECL
-+   contain the declaration node of the function. FNDECL is also set when
-+   INIT_CUMULATIVE_ARGS is used to find arguments for the function being
-+   compiled.  N_NAMED_ARGS is set to the number of named arguments, including a
-+   structure return address if it is passed as a parameter, when making a call.
-+   When processing incoming arguments, N_NAMED_ARGS is set to -1.
-+
-+   When processing a call to a compiler support library function, LIBNAME
-+   identifies which one.  It is a symbol_ref rtx which contains the name of the
-+   function, as a string. LIBNAME is 0 when an ordinary C function call is
-+   being processed. Thus, each time this macro is called, either LIBNAME or
-+   FNTYPE is nonzero, but never both of them at once.
-+*/
-+#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \
-+  avr32_init_cumulative_args(&(CUM), FNTYPE, LIBNAME, FNDECL)
-+
-+
-+/*
-+A C statement (sans semicolon) to update the summarizer variable
-+CUM to advance past an argument in the argument list.  The
-+values MODE, TYPE and NAMED describe that argument.
-+Once this is done, the variable CUM is suitable for analyzing
-+the following argument with FUNCTION_ARG, etc.
-+
-+This macro need not do anything if the argument in question was passed
-+on the stack.  The compiler knows how to track the amount of stack space
-+used for arguments without any special help.
-+*/
-+#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
-+  avr32_function_arg_advance(&(CUM), MODE, TYPE, NAMED)
-+
-+/*
-+If defined, a C expression which determines whether, and in which direction,
-+to pad out an argument with extra space.  The value should be of type
-+enum direction: either 'upward' to pad above the argument,
-+'downward' to pad below, or 'none' to inhibit padding.
-+
-+The amount of padding is always just enough to reach the next
-+multiple of FUNCTION_ARG_BOUNDARY; this macro does not control
-+it.
-+
-+This macro has a default definition which is right for most systems.
-+For little-endian machines, the default is to pad upward.  For
-+big-endian machines, the default is to pad downward for an argument of
-+constant size shorter than an int, and upward otherwise.
-+*/
-+#define FUNCTION_ARG_PADDING(MODE, TYPE) \
-+  avr32_function_arg_padding(MODE, TYPE)
-+
-+/*
-+  Specify padding for the last element of a block move between registers
-+  and memory. First is nonzero if this is the only element. Defining
-+  this macro allows better control of register function parameters on
-+  big-endian machines, without using PARALLEL rtl. In particular,
-+  MUST_PASS_IN_STACK need not test padding and mode of types in registers,
-+  as there is no longer a "wrong" part of a register; For example, a three
-+  byte aggregate may be passed in the high part of a register if so required.
-+*/
-+#define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \
-+  avr32_function_arg_padding(MODE, TYPE)
-+
-+/*
-+If defined, a C expression which determines whether the default
-+implementation of va_arg will attempt to pad down before reading the
-+next argument, if that argument is smaller than its aligned space as
-+controlled by PARM_BOUNDARY.  If this macro is not defined, all such
-+arguments are padded down if BYTES_BIG_ENDIAN is true.
-+*/
-+#define PAD_VARARGS_DOWN \
-+  (FUNCTION_ARG_PADDING (TYPE_MODE (type), type) == downward)
-+
-+
-+/*
-+A C expression that is nonzero if REGNO is the number of a hard
-+register in which function arguments are sometimes passed.  This does
-+not include implicit arguments such as the static chain and
-+the structure-value address.  On many machines, no registers can be
-+used for this purpose since all function arguments are pushed on the
-+stack.
-+*/
-+/*
-+  Use r8 - r12 for function arguments.
-+*/
-+#define FUNCTION_ARG_REGNO_P(REGNO) \
-+  (REGNO >= 3 && REGNO <= 7)
-+
-+/* Number of registers used for passing function arguments */
-+#define NUM_ARG_REGS 5
-+
-+/*
-+If defined, the order in which arguments are loaded into their
-+respective argument registers is reversed so that the last
-+argument is loaded first.  This macro only affects arguments
-+passed in registers.
-+*/
-+/* #define LOAD_ARGS_REVERSED */
-+
-+/** How Scalar Function Values Are Returned **/
-+
-+/* AVR32 is using r12 as return register. */
-+#define RET_REGISTER (15 - 12)
-+
-+/*
-+Define this macro if -traditional should not cause functions
-+declared to return float to convert the value to double.
-+*/
-+/* #define TRADITIONAL_RETURN_FLOAT */
-+
-+/*
-+A C expression to create an RTX representing the place where a
-+function returns a value of data type VALTYPE.  VALTYPE is
-+a tree node representing a data type.  Write TYPE_MODE(VALTYPE)
-+to get the machine mode used to represent that type.
-+On many machines, only the mode is relevant.  (Actually, on most
-+machines, scalar values are returned in the same place regardless of
-+mode).
-+
-+The value of the expression is usually a reg RTX for the hard
-+register where the return value is stored.  The value can also be a
-+parallel RTX, if the return value is in multiple places.  See
-+FUNCTION_ARG for an explanation of the parallel form.
-+
-+If PROMOTE_FUNCTION_RETURN is defined, you must apply the same
-+promotion rules specified in PROMOTE_MODE if VALTYPE is a
-+scalar type.
-+
-+If the precise function being called is known, FUNC is a tree
-+node (FUNCTION_DECL) for it; otherwise, FUNC is a null
-+pointer.  This makes it possible to use a different value-returning
-+convention for specific functions when all their calls are
-+known.
-+
-+FUNCTION_VALUE is not used for return vales with aggregate data
-+types, because these are returned in another way.  See
-+STRUCT_VALUE_REGNUM and related macros, below.
-+*/
-+#define FUNCTION_VALUE(VALTYPE, FUNC) avr32_function_value(VALTYPE, FUNC)
-+
-+
-+/*
-+A C expression to create an RTX representing the place where a library
-+function returns a value of mode MODE.  If the precise function
-+being called is known, FUNC is a tree node
-+(FUNCTION_DECL) for it; otherwise, func is a null
-+pointer.  This makes it possible to use a different value-returning
-+convention for specific functions when all their calls are
-+known.
-+
-+Note that "library function" in this context means a compiler
-+support routine, used to perform arithmetic, whose name is known
-+specially by the compiler and was not mentioned in the C code being
-+compiled.
-+
-+The definition of LIBRARY_VALUE need not be concerned aggregate
-+data types, because none of the library functions returns such types.
-+*/
-+#define LIBCALL_VALUE(MODE) avr32_libcall_value(MODE)
-+
-+/*
-+A C expression that is nonzero if REGNO is the number of a hard
-+register in which the values of called function may come back.
-+
-+A register whose use for returning values is limited to serving as the
-+second of a pair (for a value of type double, say) need not be
-+recognized by this macro.  So for most machines, this definition
-+suffices:
-+  #define FUNCTION_VALUE_REGNO_P(N) ((N) == 0)
-+
-+If the machine has register windows, so that the caller and the called
-+function use different registers for the return value, this macro
-+should recognize only the caller's register numbers.
-+*/
-+/*
-+  When returning a value of mode DImode, r11:r10 is used, else r12 is used.
-+*/
-+#define FUNCTION_VALUE_REGNO_P(REGNO) ((REGNO) == RET_REGISTER \
-+                                       || (REGNO) == INTERNAL_REGNUM(11))
-+
-+
-+/** How Large Values Are Returned **/
-+
-+
-+/*
-+Define this macro to be 1 if all structure and union return values must be
-+in memory.  Since this results in slower code, this should be defined
-+only if needed for compatibility with other compilers or with an ABI.
-+If you define this macro to be 0, then the conventions used for structure
-+and union return values are decided by the RETURN_IN_MEMORY macro.
-+
-+If not defined, this defaults to the value 1.
-+*/
-+#define DEFAULT_PCC_STRUCT_RETURN 0
-+
-+
-+
-+
-+/** Generating Code for Profiling **/
-+
-+/*
-+A C statement or compound statement to output to FILE some
-+assembler code to call the profiling subroutine mcount.
-+
-+The details of how mcount expects to be called are determined by
-+your operating system environment, not by GCC.  To figure them out,
-+compile a small program for profiling using the system's installed C
-+compiler and look at the assembler code that results.
-+
-+Older implementations of mcount expect the address of a counter
-+variable to be loaded into some register.  The name of this variable is
-+'LP' followed by the number LABELNO, so you would generate
-+the name using 'LP%d' in a fprintf.
-+*/
-+/* ToDo: fixme */
-+#ifndef FUNCTION_PROFILER
-+#define FUNCTION_PROFILER(FILE, LABELNO) \
-+  fprintf((FILE), "/* profiler %d */", (LABELNO))
-+#endif
-+
-+
-+/*****************************************************************************
-+ * Trampolines for Nested Functions                                          *
-+ *****************************************************************************/
-+
-+/*
-+A C statement to output, on the stream FILE, assembler code for a
-+block of data that contains the constant parts of a trampoline.  This
-+code should not include a label - the label is taken care of
-+automatically.
-+
-+If you do not define this macro, it means no template is needed
-+for the target.  Do not define this macro on systems where the block move
-+code to copy the trampoline into place would be larger than the code
-+to generate it on the spot.
-+*/
-+/* ToDo: correct? */
-+#define TRAMPOLINE_TEMPLATE(FILE) avr32_trampoline_template(FILE);
-+
-+
-+/*
-+A C expression for the size in bytes of the trampoline, as an integer.
-+*/
-+/* ToDo: fixme */
-+#define TRAMPOLINE_SIZE 0x0C
-+
-+/*
-+Alignment required for trampolines, in bits.
-+
-+If you don't define this macro, the value of BIGGEST_ALIGNMENT
-+is used for aligning trampolines.
-+*/
-+#define TRAMPOLINE_ALIGNMENT 16
-+
-+/*
-+A C statement to initialize the variable parts of a trampoline.
-+ADDR is an RTX for the address of the trampoline; FNADDR is
-+an RTX for the address of the nested function; STATIC_CHAIN is an
-+RTX for the static chain value that should be passed to the function
-+when it is called.
-+*/
-+#define INITIALIZE_TRAMPOLINE(ADDR, FNADDR, STATIC_CHAIN) \
-+  avr32_initialize_trampoline(ADDR, FNADDR, STATIC_CHAIN)
-+
-+
-+/******************************************************************************
-+ * Implicit Calls to Library Routines
-+ *****************************************************************************/
-+
-+/* Tail calling.  */
-+
-+/* A C expression that evaluates to true if it is ok to perform a sibling
-+   call to DECL.  */
-+#define FUNCTION_OK_FOR_SIBCALL(DECL) 0
-+
-+#define OVERRIDE_OPTIONS  avr32_override_options ()
-+
-+
-+
-+/******************************************************************************
-+ * Addressing Modes
-+ *****************************************************************************/
-+
-+/*
-+A C expression that is nonzero if the machine supports pre-increment,
-+pre-decrement, post-increment, or post-decrement addressing respectively.
-+*/
-+/*
-+  AVR32 supports Rp++ and --Rp
-+*/
-+#define HAVE_PRE_INCREMENT 0
-+#define HAVE_PRE_DECREMENT 1
-+#define HAVE_POST_INCREMENT 1
-+#define HAVE_POST_DECREMENT 0
-+
-+/*
-+A C expression that is nonzero if the machine supports pre- or
-+post-address side-effect generation involving constants other than
-+the size of the memory operand.
-+*/
-+#define HAVE_PRE_MODIFY_DISP 0
-+#define HAVE_POST_MODIFY_DISP 0
-+
-+/*
-+A C expression that is nonzero if the machine supports pre- or
-+post-address side-effect generation involving a register displacement.
-+*/
-+#define HAVE_PRE_MODIFY_REG 0
-+#define HAVE_POST_MODIFY_REG 0
-+
-+/*
-+A C expression that is 1 if the RTX X is a constant which
-+is a valid address.  On most machines, this can be defined as
-+CONSTANT_P (X), but a few machines are more restrictive
-+in which constant addresses are supported.
-+
-+CONSTANT_P accepts integer-values expressions whose values are
-+not explicitly known, such as symbol_ref, label_ref, and
-+high expressions and const arithmetic expressions, in
-+addition to const_int and const_double expressions.
-+*/
-+#define CONSTANT_ADDRESS_P(X) CONSTANT_P(X)
-+
-+/*
-+A number, the maximum number of registers that can appear in a valid
-+memory address.  Note that it is up to you to specify a value equal to
-+the maximum number that GO_IF_LEGITIMATE_ADDRESS would ever
-+accept.
-+*/
-+#define MAX_REGS_PER_ADDRESS 2
-+
-+/*
-+A C compound statement with a conditional goto LABEL;
-+executed if X (an RTX) is a legitimate memory address on the
-+target machine for a memory operand of mode MODE.
-+
-+It usually pays to define several simpler macros to serve as
-+subroutines for this one.  Otherwise it may be too complicated to
-+understand.
-+
-+This macro must exist in two variants: a strict variant and a
-+non-strict one.  The strict variant is used in the reload pass.  It
-+must be defined so that any pseudo-register that has not been
-+allocated a hard register is considered a memory reference.  In
-+contexts where some kind of register is required, a pseudo-register
-+with no hard register must be rejected.
-+
-+The non-strict variant is used in other passes.  It must be defined to
-+accept all pseudo-registers in every context where some kind of
-+register is required.
-+
-+Compiler source files that want to use the strict variant of this
-+macro define the macro REG_OK_STRICT.  You should use an
-+#ifdef REG_OK_STRICT conditional to define the strict variant
-+in that case and the non-strict variant otherwise.
-+
-+Subroutines to check for acceptable registers for various purposes (one
-+for base registers, one for index registers, and so on) are typically
-+among the subroutines used to define GO_IF_LEGITIMATE_ADDRESS.
-+Then only these subroutine macros need have two variants; the higher
-+levels of macros may be the same whether strict or not.
-+
-+Normally, constant addresses which are the sum of a symbol_ref
-+and an integer are stored inside a const RTX to mark them as
-+constant.  Therefore, there is no need to recognize such sums
-+specifically as legitimate addresses.  Normally you would simply
-+recognize any const as legitimate.
-+
-+Usually PRINT_OPERAND_ADDRESS is not prepared to handle constant
-+sums that are not marked with  const.  It assumes that a naked
-+plus indicates indexing.  If so, then you must reject such
-+naked constant sums as illegitimate addresses, so that none of them will
-+be given to PRINT_OPERAND_ADDRESS.
-+
-+On some machines, whether a symbolic address is legitimate depends on
-+the section that the address refers to.  On these machines, define the
-+macro ENCODE_SECTION_INFO to store the information into the
-+symbol_ref, and then check for it here.  When you see a
-+const, you will have to look inside it to find the
-+symbol_ref in order to determine the section.
-+
-+The best way to modify the name string is by adding text to the
-+beginning, with suitable punctuation to prevent any ambiguity.  Allocate
-+the new name in saveable_obstack.  You will have to modify
-+ASM_OUTPUT_LABELREF to remove and decode the added text and
-+output the name accordingly, and define STRIP_NAME_ENCODING to
-+access the original name string.
-+
-+You can check the information stored here into the symbol_ref in
-+the definitions of the macros GO_IF_LEGITIMATE_ADDRESS and
-+PRINT_OPERAND_ADDRESS.
-+*/
-+#ifdef REG_OK_STRICT
-+#  define GO_IF_LEGITIMATE_ADDRESS(MODE, X, LABEL)	\
-+  do							\
-+    {							\
-+      if (avr32_legitimate_address(MODE, X, 1))		\
-+	goto LABEL;					\
-+    }							\
-+  while (0)
-+#else
-+#  define GO_IF_LEGITIMATE_ADDRESS(MODE, X, LABEL)	\
-+  do							\
-+    {							\
-+      if (avr32_legitimate_address(MODE, X, 0))		\
-+	goto LABEL;					\
-+    }							\
-+  while (0)
-+#endif
-+
-+/*
-+A C expression that is nonzero if X (assumed to be a reg
-+RTX) is valid for use as a base register.  For hard registers, it
-+should always accept those which the hardware permits and reject the
-+others.  Whether the macro accepts or rejects pseudo registers must be
-+controlled by REG_OK_STRICT as described above.  This usually
-+requires two variant definitions, of which REG_OK_STRICT
-+controls the one actually used.
-+*/
-+#ifdef REG_OK_STRICT
-+#  define REG_OK_FOR_BASE_P(X) \
-+  REGNO_OK_FOR_BASE_P(REGNO(X))
-+#else
-+#  define REG_OK_FOR_BASE_P(X) \
-+  ((REGNO(X) <= LAST_REGNUM) || (REGNO(X) >= FIRST_PSEUDO_REGISTER))
-+#endif
-+
-+
-+/*
-+A C expression that is nonzero if X (assumed to be a reg
-+RTX) is valid for use as an index register.
-+
-+The difference between an index register and a base register is that
-+the index register may be scaled.  If an address involves the sum of
-+two registers, neither one of them scaled, then either one may be
-+labeled the "base" and the other the "index"; but whichever
-+labeling is used must fit the machine's constraints of which registers
-+may serve in each capacity.  The compiler will try both labelings,
-+looking for one that is valid, and will reload one or both registers
-+only if neither labeling works.
-+*/
-+#define REG_OK_FOR_INDEX_P(X) \
-+  REG_OK_FOR_BASE_P(X)
-+
-+
-+/*
-+A C compound statement that attempts to replace X with a valid
-+memory address for an operand of mode MODE.  win will be a
-+C statement label elsewhere in the code; the macro definition may use
-+
-+  GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN);
-+
-+to avoid further processing if the address has become legitimate.
-+
-+X will always be the result of a call to break_out_memory_refs,
-+and OLDX will be the operand that was given to that function to produce
-+X.
-+
-+The code generated by this macro should not alter the substructure of
-+X.  If it transforms X into a more legitimate form, it
-+should assign X (which will always be a C variable) a new value.
-+
-+It is not necessary for this macro to come up with a legitimate
-+address.  The compiler has standard ways of doing so in all cases.  In
-+fact, it is safe for this macro to do nothing.  But often a
-+machine-dependent strategy can generate better code.
-+*/
-+#define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN)			\
-+  do								\
-+    {								\
-+      if (GET_CODE(X) == PLUS					\
-+	  && GET_CODE(XEXP(X, 0)) == REG			\
-+	  && GET_CODE(XEXP(X, 1)) == CONST_INT			\
-+	  && !CONST_OK_FOR_CONSTRAINT_P(INTVAL(XEXP(X, 1)),	\
-+					'K', "Ks16"))		\
-+	{							\
-+	  rtx index = force_reg(SImode, XEXP(X, 1));		\
-+	  X = gen_rtx_PLUS( SImode, XEXP(X, 0), index);		\
-+	}							\
-+      GO_IF_LEGITIMATE_ADDRESS(MODE, X, WIN);			\
-+    }								\
-+  while(0)
-+
-+
-+/*
-+A C statement or compound statement with a conditional
-+goto LABEL; executed if memory address X (an RTX) can have
-+different meanings depending on the machine mode of the memory
-+reference it is used for or if the address is valid for some modes
-+but not others.
-+
-+Autoincrement and autodecrement addresses typically have mode-dependent
-+effects because the amount of the increment or decrement is the size
-+of the operand being addressed.  Some machines have other mode-dependent
-+addresses.  Many RISC machines have no mode-dependent addresses.
-+
-+You may assume that ADDR is a valid address for the machine.
-+*/
-+#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR, LABEL)	\
-+  do							\
-+    {							\
-+      if (GET_CODE (ADDR) == POST_INC			\
-+	  || GET_CODE (ADDR) == PRE_DEC)		\
-+	goto LABEL;					\
-+    }							\
-+  while (0)
-+
-+/*
-+A C expression that is nonzero if X is a legitimate constant for
-+an immediate operand on the target machine.  You can assume that
-+X satisfies CONSTANT_P, so you need not check this.  In fact,
-+'1' is a suitable definition for this macro on machines where
-+anything CONSTANT_P is valid.
-+*/
-+#define LEGITIMATE_CONSTANT_P(X) avr32_legitimate_constant_p(X)
-+
-+
-+/******************************************************************************
-+ * Condition Code Status
-+ *****************************************************************************/
-+
-+#define HAVE_conditional_move 1
-+
-+/*
-+C code for a data type which is used for declaring the mdep
-+component of cc_status.  It defaults to int.
-+
-+This macro is not used on machines that do not use cc0.
-+*/
-+
-+typedef struct
-+{
-+  int flags;
-+  rtx value;
-+  int fpflags;
-+  rtx fpvalue;
-+} avr32_status_reg;
-+
-+
-+#define CC_STATUS_MDEP avr32_status_reg
-+
-+/*
-+A C expression to initialize the mdep field to "empty".
-+The default definition does nothing, since most machines don't use
-+the field anyway.  If you want to use the field, you should probably
-+define this macro to initialize it.
-+
-+This macro is not used on machines that do not use cc0.
-+*/
-+
-+#define CC_STATUS_MDEP_INIT  \
-+ (cc_status.mdep.flags = CC_NONE , cc_status.mdep.value = 0)
-+
-+#define FPCC_STATUS_INIT \
-+   (cc_status.mdep.fpflags = CC_NONE , cc_status.mdep.fpvalue = 0)
-+
-+/*
-+A C compound statement to set the components of cc_status
-+appropriately for an insn INSN whose body is EXP.  It is
-+this macro's responsibility to recognize insns that set the condition
-+code as a byproduct of other activity as well as those that explicitly
-+set (cc0).
-+
-+This macro is not used on machines that do not use cc0.
-+
-+If there are insns that do not set the condition code but do alter
-+other machine registers, this macro must check to see whether they
-+invalidate the expressions that the condition code is recorded as
-+reflecting.  For example, on the 68000, insns that store in address
-+registers do not set the condition code, which means that usually
-+NOTICE_UPDATE_CC can leave cc_status unaltered for such
-+insns.  But suppose that the previous insn set the condition code
-+based on location 'a4@@(102)' and the current insn stores a new
-+value in 'a4'.  Although the condition code is not changed by
-+this, it will no longer be true that it reflects the contents of
-+'a4@@(102)'.  Therefore, NOTICE_UPDATE_CC must alter
-+cc_status in this case to say that nothing is known about the
-+condition code value.
-+
-+The definition of NOTICE_UPDATE_CC must be prepared to deal
-+with the results of peephole optimization: insns whose patterns are
-+parallel RTXs containing various reg, mem or
-+constants which are just the operands.  The RTL structure of these
-+insns is not sufficient to indicate what the insns actually do.  What
-+NOTICE_UPDATE_CC should do when it sees one is just to run
-+CC_STATUS_INIT.
-+
-+A possible definition of NOTICE_UPDATE_CC is to call a function
-+that looks at an attribute (see Insn Attributes) named, for example,
-+'cc'.  This avoids having detailed information about patterns in
-+two places, the 'md' file and in NOTICE_UPDATE_CC.
-+*/
-+
-+#define NOTICE_UPDATE_CC(EXP, INSN) avr32_notice_update_cc(EXP, INSN)
-+
-+
-+
-+
-+/******************************************************************************
-+ * Describing Relative Costs of Operations
-+ *****************************************************************************/
-+
-+
-+
-+/*
-+A C expression for the cost of moving data of mode MODE from a
-+register in class FROM to one in class TO.  The classes are
-+expressed using the enumeration values such as GENERAL_REGS.  A
-+value of 2 is the default; other values are interpreted relative to
-+that.
-+
-+It is not required that the cost always equal 2 when FROM is the
-+same as TO; on some machines it is expensive to move between
-+registers if they are not general registers.
-+
-+If reload sees an insn consisting of a single set between two
-+hard registers, and if REGISTER_MOVE_COST applied to their
-+classes returns a value of 2, reload does not check to ensure that the
-+constraints of the insn are met.  Setting a cost of other than 2 will
-+allow reload to verify that the constraints are met.  You should do this
-+if the movm pattern's constraints do not allow such copying.
-+*/
-+#define REGISTER_MOVE_COST(MODE, FROM, TO) \
-+  ((GET_MODE_SIZE(MODE) <= 4) ? 2:         \
-+   (GET_MODE_SIZE(MODE) <= 8) ? 3:         \
-+   4)
-+
-+/*
-+A C expression for the cost of moving data of mode MODE between a
-+register of class CLASS and memory; IN is zero if the value
-+is to be written to memory, nonzero if it is to be read in.  This cost
-+is relative to those in REGISTER_MOVE_COST.  If moving between
-+registers and memory is more expensive than between two registers, you
-+should define this macro to express the relative cost.
-+
-+If you do not define this macro, GCC uses a default cost of 4 plus
-+the cost of copying via a secondary reload register, if one is
-+needed.  If your machine requires a secondary reload register to copy
-+between memory and a register of CLASS but the reload mechanism is
-+more complex than copying via an intermediate, define this macro to
-+reflect the actual cost of the move.
-+
-+GCC defines the function memory_move_secondary_cost if
-+secondary reloads are needed.  It computes the costs due to copying via
-+a secondary register.  If your machine copies from memory using a
-+secondary register in the conventional way but the default base value of
-+4 is not correct for your machine, define this macro to add some other
-+value to the result of that function.  The arguments to that function
-+are the same as to this macro.
-+*/
-+/*
-+  Memory moves are costly
-+*/
-+#define MEMORY_MOVE_COST(MODE, CLASS, IN)    10
-+/*
-+  (((IN) ? ((GET_MODE_SIZE(MODE) < 4) ? 4 :          \
-+            (GET_MODE_SIZE(MODE) > 8) ? 6 :          \
-+            3)                                       \
-+         : ((GET_MODE_SIZE(MODE) > 8) ? 4 : 2)))
-+*/
-+
-+/*
-+A C expression for the cost of a branch instruction.  A value of 1 is
-+the default; other values are interpreted relative to that.
-+*/
-+  /* Try to use conditionals as much as possible */
-+#define BRANCH_COST (TARGET_BRANCH_PRED ? 3 : 5)
-+
-+/*A C expression for the maximum number of instructions to execute via conditional
-+  execution instructions instead of a branch. A value of BRANCH_COST+1 is the default
-+  if the machine does not use cc0, and 1 if it does use cc0.*/
-+#define MAX_CONDITIONAL_EXECUTE 3
-+
-+/*
-+Define this macro as a C expression which is nonzero if accessing less
-+than a word of memory (i.e.: a char or a short) is no
-+faster than accessing a word of memory, i.e., if such access
-+require more than one instruction or if there is no difference in cost
-+between byte and (aligned) word loads.
-+
-+When this macro is not defined, the compiler will access a field by
-+finding the smallest containing object; when it is defined, a fullword
-+load will be used if alignment permits.  Unless bytes accesses are
-+faster than word accesses, using word accesses is preferable since it
-+may eliminate subsequent memory access if subsequent accesses occur to
-+other fields in the same word of the structure, but to different bytes.
-+*/
-+#define SLOW_BYTE_ACCESS 1
-+
-+
-+/*
-+Define this macro if it is as good or better to call a constant
-+function address than to call an address kept in a register.
-+*/
-+#define NO_FUNCTION_CSE
-+
-+
-+/******************************************************************************
-+ * Adjusting the Instruction Scheduler
-+ *****************************************************************************/
-+
-+/*****************************************************************************
-+ * Dividing the Output into Sections (Texts, Data, ...)                      *
-+ *****************************************************************************/
-+
-+/*
-+A C expression whose value is a string, including spacing, containing the
-+assembler operation that should precede instructions and read-only data.
-+Normally "\t.text" is right.
-+*/
-+#define TEXT_SECTION_ASM_OP "\t.text"
-+/*
-+A C statement that switches to the default section containing instructions.
-+Normally this is not needed, as simply defining TEXT_SECTION_ASM_OP
-+is enough.  The MIPS port uses this to sort all functions after all data
-+declarations.
-+*/
-+/* #define TEXT_SECTION */
-+
-+/*
-+A C expression whose value is a string, including spacing, containing the
-+assembler operation to identify the following data as writable initialized
-+data.  Normally "\t.data" is right.
-+*/
-+#define DATA_SECTION_ASM_OP "\t.data"
-+
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+shared data.  If not defined, DATA_SECTION_ASM_OP will be used.
-+*/
-+
-+/*
-+A C expression whose value is a string, including spacing, containing
-+the assembler operation to identify the following data as read-only
-+initialized data.
-+*/
-+#undef READONLY_DATA_SECTION_ASM_OP
-+#define READONLY_DATA_SECTION_ASM_OP \
-+  ((TARGET_USE_RODATA_SECTION) ?  \
-+   "\t.section\t.rodata" :                \
-+   TEXT_SECTION_ASM_OP )
-+
-+
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+uninitialized global data.  If not defined, and neither
-+ASM_OUTPUT_BSS nor ASM_OUTPUT_ALIGNED_BSS are defined,
-+uninitialized global data will be output in the data section if
-+-fno-common is passed, otherwise ASM_OUTPUT_COMMON will be
-+used.
-+*/
-+#define BSS_SECTION_ASM_OP	"\t.section\t.bss"
-+
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+uninitialized global shared data.  If not defined, and
-+BSS_SECTION_ASM_OP is, the latter will be used.
-+*/
-+/*#define SHARED_BSS_SECTION_ASM_OP "\trseg\tshared_bbs_section:data:noroot(0)\n"*/
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+initialization code.  If not defined, GCC will assume such a section does
-+not exist.
-+*/
-+#undef  INIT_SECTION_ASM_OP
-+#define INIT_SECTION_ASM_OP "\t.section\t.init"
-+
-+/*
-+If defined, a C expression whose value is a string, including spacing,
-+containing the assembler operation to identify the following data as
-+finalization code.  If not defined, GCC will assume such a section does
-+not exist.
-+*/
-+#undef  FINI_SECTION_ASM_OP
-+#define FINI_SECTION_ASM_OP "\t.section\t.fini"
-+
-+/*
-+If defined, an ASM statement that switches to a different section
-+via SECTION_OP, calls FUNCTION, and switches back to
-+the text section.  This is used in crtstuff.c if
-+INIT_SECTION_ASM_OP or FINI_SECTION_ASM_OP to calls
-+to initialization and finalization functions from the init and fini
-+sections.  By default, this macro uses a simple function call.  Some
-+ports need hand-crafted assembly code to avoid dependencies on
-+registers initialized in the function prologue or to ensure that
-+constant pools don't end up too far way in the text section.
-+*/
-+#define CRT_CALL_STATIC_FUNCTION(SECTION_OP, FUNC)      \
-+   asm ( SECTION_OP "\n" \
-+         "mcall   r6[" USER_LABEL_PREFIX #FUNC "@got]\n" \
-+         TEXT_SECTION_ASM_OP);
-+
-+
-+/*
-+Define this macro to be an expression with a nonzero value if jump
-+tables (for tablejump insns) should be output in the text
-+section, along with the assembler instructions.  Otherwise, the
-+readonly data section is used.
-+
-+This macro is irrelevant if there is no separate readonly data section.
-+*/
-+#define JUMP_TABLES_IN_TEXT_SECTION 1
-+
-+
-+/******************************************************************************
-+ * Position Independent Code (PIC)
-+ *****************************************************************************/
-+
-+#ifndef AVR32_ALWAYS_PIC
-+#define AVR32_ALWAYS_PIC 0
-+#endif
-+
-+/* GOT is set to r6 */
-+#define PIC_OFFSET_TABLE_REGNUM INTERNAL_REGNUM(6)
-+
-+/*
-+A C expression that is nonzero if X is a legitimate immediate
-+operand on the target machine when generating position independent code.
-+You can assume that X satisfies CONSTANT_P, so you need not
-+check this.  You can also assume flag_pic is true, so you need not
-+check it either.  You need not define this macro if all constants
-+(including SYMBOL_REF) can be immediate operands when generating
-+position independent code.
-+*/
-+/* We can't directly access anything that contains a symbol,
-+   nor can we indirect via the constant pool.  */
-+#define LEGITIMATE_PIC_OPERAND_P(X) avr32_legitimate_pic_operand_p(X)
-+
-+
-+/* We need to know when we are making a constant pool; this determines
-+   whether data needs to be in the GOT or can be referenced via a GOT
-+   offset.  */
-+extern int making_const_table;
-+
-+/******************************************************************************
-+ * Defining the Output Assembler Language
-+ *****************************************************************************/
-+
-+
-+/*
-+A C string constant describing how to begin a comment in the target
-+assembler language.  The compiler assumes that the comment will end at
-+the end of the line.
-+*/
-+#define ASM_COMMENT_START "# "
-+
-+/*
-+A C string constant for text to be output before each asm
-+statement or group of consecutive ones.  Normally this is
-+"#APP", which is a comment that has no effect on most
-+assemblers but tells the GNU assembler that it must check the lines
-+that follow for all valid assembler constructs.
-+*/
-+#undef ASM_APP_ON
-+#define ASM_APP_ON "#APP\n"
-+
-+/*
-+A C string constant for text to be output after each asm
-+statement or group of consecutive ones.  Normally this is
-+"#NO_APP", which tells the GNU assembler to resume making the
-+time-saving assumptions that are valid for ordinary compiler output.
-+*/
-+#undef ASM_APP_OFF
-+#define ASM_APP_OFF "#NO_APP\n"
-+
-+
-+
-+#define FILE_ASM_OP 		"\t.file\n"
-+#define IDENT_ASM_OP 		"\t.ident\t"
-+#define SET_ASM_OP		"\t.set\t"
-+
-+
-+/*
-+ * Output assembly directives to switch to section name. The section
-+ * should have attributes as specified by flags, which is a bit mask
-+ * of the SECTION_* flags defined in 'output.h'. If align is nonzero,
-+ * it contains an alignment in bytes to be used for the section,
-+ * otherwise some target default should be used. Only targets that
-+ * must specify an alignment within the section directive need pay
-+ * attention to align -- we will still use ASM_OUTPUT_ALIGN.
-+ *
-+ * NOTE: This one must not be moved to avr32.c
-+ */
-+#undef TARGET_ASM_NAMED_SECTION
-+#define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section
-+
-+
-+/*
-+You may define this macro as a C expression.  You should define the
-+expression to have a nonzero value if GCC should output the constant
-+pool for a function before the code for the function, or a zero value if
-+GCC should output the constant pool after the function.  If you do
-+not define this macro, the usual case, GCC will output the constant
-+pool before the function.
-+*/
-+#define CONSTANT_POOL_BEFORE_FUNCTION 0
-+
-+
-+/*
-+Define this macro as a C expression which is nonzero if the constant
-+EXP, of type tree, should be output after the code for a
-+function.  The compiler will normally output all constants before the
-+function; you need not define this macro if this is OK.
-+*/
-+#define CONSTANT_AFTER_FUNCTION_P(EXP) 1
-+
-+
-+/*
-+Define this macro as a C expression which is nonzero if C is
-+used as a logical line separator by the assembler.
-+
-+If you do not define this macro, the default is that only
-+the character ';' is treated as a logical line separator.
-+*/
-+#define IS_ASM_LOGICAL_LINE_SEPARATOR(C) ((C) == '\n')
-+
-+
-+/** Output of Uninitialized Variables **/
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM the assembler definition of a common-label named
-+NAME whose size is SIZE bytes.  The variable ROUNDED
-+is the size rounded up to whatever alignment the caller wants.
-+
-+Use the expression assemble_name(STREAM, NAME) to
-+output the name itself; before and after that, output the additional
-+assembler syntax for defining the name, and a newline.
-+
-+This macro controls how the assembler definitions of uninitialized
-+common global variables are output.
-+*/
-+/*
-+#define ASM_OUTPUT_COMMON(STREAM, NAME, SIZE, ROUNDED) \
-+  avr32_asm_output_common(STREAM, NAME, SIZE, ROUNDED)
-+*/
-+
-+#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED)	\
-+  do							\
-+    {							\
-+      fputs ("\t.comm ", (FILE));			\
-+      assemble_name ((FILE), (NAME));			\
-+      fprintf ((FILE), ",%d\n", (SIZE));		\
-+    }							\
-+  while (0)
-+
-+/*
-+ * Like ASM_OUTPUT_BSS except takes the required alignment as a
-+ * separate, explicit argument.  If you define this macro, it is used
-+ * in place of ASM_OUTPUT_BSS, and gives you more flexibility in
-+ * handling the required alignment of the variable.  The alignment is
-+ * specified as the number of bits.
-+ *
-+ * Try to use function asm_output_aligned_bss defined in file varasm.c
-+ * when defining this macro.
-+ */
-+#define ASM_OUTPUT_ALIGNED_BSS(STREAM, DECL, NAME, SIZE, ALIGNMENT) \
-+  asm_output_aligned_bss (STREAM, DECL, NAME, SIZE, ALIGNMENT)
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM the assembler definition of a local-common-label named
-+NAME whose size is SIZE bytes.  The variable ROUNDED
-+is the size rounded up to whatever alignment the caller wants.
-+
-+Use the expression assemble_name(STREAM, NAME) to
-+output the name itself; before and after that, output the additional
-+assembler syntax for defining the name, and a newline.
-+
-+This macro controls how the assembler definitions of uninitialized
-+static variables are output.
-+*/
-+#define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED)	\
-+  do							\
-+    {							\
-+      fputs ("\t.lcomm ", (FILE));			\
-+      assemble_name ((FILE), (NAME));			\
-+      fprintf ((FILE), ",%d, %d\n", (SIZE), 2);		\
-+    }							\
-+  while (0)
-+
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM the assembler definition of a label named NAME.
-+Use the expression assemble_name(STREAM, NAME) to
-+output the name itself; before and after that, output the additional
-+assembler syntax for defining the name, and a newline.
-+*/
-+#define ASM_OUTPUT_LABEL(STREAM, NAME) avr32_asm_output_label(STREAM, NAME)
-+
-+/* A C string containing the appropriate assembler directive to
-+ * specify the size of a symbol, without any arguments. On systems
-+ * that use ELF, the default (in 'config/elfos.h') is '"\t.size\t"';
-+ * on other systems, the default is not to define this macro.
-+ *
-+ * Define this macro only if it is correct to use the default
-+ * definitions of ASM_ OUTPUT_SIZE_DIRECTIVE and
-+ * ASM_OUTPUT_MEASURED_SIZE for your system. If you need your own
-+ * custom definitions of those macros, or if you do not need explicit
-+ * symbol sizes at all, do not define this macro.
-+ */
-+#define SIZE_ASM_OP "\t.size\t"
-+
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM some commands that will make the label NAME global;
-+that is, available for reference from other files.  Use the expression
-+assemble_name(STREAM, NAME) to output the name
-+itself; before and after that, output the additional assembler syntax
-+for making that name global, and a newline.
-+*/
-+#define GLOBAL_ASM_OP "\t.globl\t"
-+
-+
-+
-+/*
-+A C expression which evaluates to true if the target supports weak symbols.
-+
-+If you don't define this macro, defaults.h provides a default
-+definition.  If either ASM_WEAKEN_LABEL or ASM_WEAKEN_DECL
-+is defined, the default definition is '1'; otherwise, it is
-+'0'.  Define this macro if you want to control weak symbol support
-+with a compiler flag such as -melf.
-+*/
-+#define SUPPORTS_WEAK 1
-+
-+/*
-+A C statement (sans semicolon) to output to the stdio stream
-+STREAM a reference in assembler syntax to a label named
-+NAME.  This should add '_' to the front of the name, if that
-+is customary on your operating system, as it is in most Berkeley Unix
-+systems.  This macro is used in assemble_name.
-+*/
-+#define ASM_OUTPUT_LABELREF(STREAM, NAME) \
-+  avr32_asm_output_labelref(STREAM, NAME)
-+
-+
-+
-+/*
-+A C expression to assign to OUTVAR (which is a variable of type
-+char *) a newly allocated string made from the string
-+NAME and the number NUMBER, with some suitable punctuation
-+added.  Use alloca to get space for the string.
-+
-+The string will be used as an argument to ASM_OUTPUT_LABELREF to
-+produce an assembler label for an internal static variable whose name is
-+NAME.  Therefore, the string must be such as to result in valid
-+assembler code.  The argument NUMBER is different each time this
-+macro is executed; it prevents conflicts between similarly-named
-+internal static variables in different scopes.
-+
-+Ideally this string should not be a valid C identifier, to prevent any
-+conflict with the user's own symbols.  Most assemblers allow periods
-+or percent signs in assembler symbols; putting at least one of these
-+between the name and the number will suffice.
-+*/
-+#define ASM_FORMAT_PRIVATE_NAME(OUTVAR, NAME, NUMBER)		\
-+  do								\
-+    {								\
-+      (OUTVAR) = (char *) alloca (strlen ((NAME)) + 10);	\
-+      sprintf ((OUTVAR), "%s.%d", (NAME), (NUMBER));		\
-+    }								\
-+  while (0)
-+
-+
-+/** Macros Controlling Initialization Routines **/
-+
-+
-+/*
-+If defined, main will not call __main as described above.
-+This macro should be defined for systems that control start-up code
-+on a symbol-by-symbol basis, such as OSF/1, and should not
-+be defined explicitly for systems that support INIT_SECTION_ASM_OP.
-+*/
-+/*
-+  __main is not defined when debugging.
-+*/
-+#define HAS_INIT_SECTION
-+
-+
-+/** Output of Assembler Instructions **/
-+
-+/*
-+A C initializer containing the assembler's names for the machine
-+registers, each one as a C string constant.  This is what translates
-+register numbers in the compiler into assembler language.
-+*/
-+
-+#define REGISTER_NAMES	\
-+{			\
-+  "pc",  "lr",		\
-+  "sp",  "r12",		\
-+  "r11", "r10",		\
-+  "r9",  "r8",		\
-+  "r7",  "r6",		\
-+  "r5",  "r4",		\
-+  "r3",  "r2",		\
-+  "r1",  "r0",		\
-+  "f15","f14",		\
-+  "f13","f12",		\
-+  "f11","f10",		\
-+  "f9", "f8",		\
-+  "f7", "f6",		\
-+  "f5", "f4",		\
-+  "f3", "f2",		\
-+  "f1", "f0"		\
-+}
-+
-+/*
-+A C compound statement to output to stdio stream STREAM the
-+assembler syntax for an instruction operand X.  X is an
-+RTL expression.
-+
-+CODE is a value that can be used to specify one of several ways
-+of printing the operand.  It is used when identical operands must be
-+printed differently depending on the context.  CODE comes from
-+the '%' specification that was used to request printing of the
-+operand.  If the specification was just '%digit' then
-+CODE is 0; if the specification was '%ltr digit'
-+then CODE is the ASCII code for ltr.
-+
-+If X is a register, this macro should print the register's name.
-+The names can be found in an array reg_names whose type is
-+char *[].  reg_names is initialized from REGISTER_NAMES.
-+
-+When the machine description has a specification '%punct'
-+(a '%' followed by a punctuation character), this macro is called
-+with a null pointer for X and the punctuation character for
-+CODE.
-+*/
-+#define PRINT_OPERAND(STREAM, X, CODE) avr32_print_operand(STREAM, X, CODE)
-+
-+/* A C statement to be executed just prior to the output of
-+   assembler code for INSN, to modify the extracted operands so
-+   they will be output differently.
-+
-+   Here the argument OPVEC is the vector containing the operands
-+   extracted from INSN, and NOPERANDS is the number of elements of
-+   the vector which contain meaningful data for this insn.
-+   The contents of this vector are what will be used to convert the insn
-+   template into assembler code, so you can change the assembler output
-+   by changing the contents of the vector.  */
-+#define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \
-+  avr32_final_prescan_insn ((INSN), (OPVEC), (NOPERANDS))
-+
-+/*
-+A C expression which evaluates to true if CODE is a valid
-+punctuation character for use in the PRINT_OPERAND macro.  If
-+PRINT_OPERAND_PUNCT_VALID_P is not defined, it means that no
-+punctuation characters (except for the standard one, '%') are used
-+in this way.
-+*/
-+/*
-+  'm' refers to the most significant word in a two-register mode.
-+*/
-+#define PRINT_OPERAND_PUNCT_VALID_P(CODE) ((CODE) == 'm' || (CODE) == 'e')
-+
-+/*
-+A C compound statement to output to stdio stream STREAM the
-+assembler syntax for an instruction operand that is a memory reference
-+whose address is X.  X is an RTL expression.
-+
-+On some machines, the syntax for a symbolic address depends on the
-+section that the address refers to.  On these machines, define the macro
-+ENCODE_SECTION_INFO to store the information into the
-+symbol_ref, and then check for it here.  (see Assembler Format.)
-+*/
-+#define PRINT_OPERAND_ADDRESS(STREAM, X) avr32_print_operand_address(STREAM, X)
-+
-+
-+/** Output of Dispatch Tables **/
-+
-+/*
-+ * A C statement to output to the stdio stream stream an assembler
-+ * pseudo-instruction to generate a difference between two
-+ * labels. value and rel are the numbers of two internal labels. The
-+ * definitions of these labels are output using
-+ * (*targetm.asm_out.internal_label), and they must be printed in the
-+ * same way here. For example,
-+ *
-+ *         fprintf (stream, "\t.word L%d-L%d\n",
-+ *                  value, rel)
-+ *
-+ * You must provide this macro on machines where the addresses in a
-+ * dispatch table are relative to the table's own address. If defined,
-+ * GCC will also use this macro on all machines when producing
-+ * PIC. body is the body of the ADDR_DIFF_VEC; it is provided so that
-+ * the mode and flags can be read.
-+ */
-+#define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL)	    \
-+    fprintf(STREAM, "\tbral\t%sL%d\n", LOCAL_LABEL_PREFIX, VALUE)
-+
-+/*
-+This macro should be provided on machines where the addresses
-+in a dispatch table are absolute.
-+
-+The definition should be a C statement to output to the stdio stream
-+STREAM an assembler pseudo-instruction to generate a reference to
-+a label.  VALUE is the number of an internal label whose
-+definition is output using ASM_OUTPUT_INTERNAL_LABEL.
-+For example,
-+
-+fprintf(STREAM, "\t.word L%d\n", VALUE)
-+*/
-+
-+#define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE)  \
-+  fprintf(STREAM, "\t.long %sL%d\n", LOCAL_LABEL_PREFIX, VALUE)
-+
-+/** Assembler Commands for Exception Regions */
-+
-+/* ToDo: All of this subsection */
-+
-+/** Assembler Commands for Alignment */
-+
-+
-+/*
-+A C statement to output to the stdio stream STREAM an assembler
-+command to advance the location counter to a multiple of 2 to the
-+POWER bytes.  POWER will be a C expression of type int.
-+*/
-+#define ASM_OUTPUT_ALIGN(STREAM, POWER)			\
-+  do							\
-+    {							\
-+      if ((POWER) != 0)					\
-+	fprintf(STREAM, "\t.align\t%d\n", POWER);	\
-+    }							\
-+  while (0)
-+
-+/*
-+Like ASM_OUTPUT_ALIGN, except that the \nop" instruction is used for padding, if
-+necessary.
-+*/
-+#define ASM_OUTPUT_ALIGN_WITH_NOP(STREAM, POWER) \
-+ fprintf(STREAM, "\t.balignw\t%d, 0xd703\n", (1 << POWER))
-+
-+
-+
-+/******************************************************************************
-+ * Controlling Debugging Information Format
-+ *****************************************************************************/
-+
-+/* How to renumber registers for dbx and gdb.  */
-+#define DBX_REGISTER_NUMBER(REGNO) ASM_REGNUM (REGNO)
-+
-+/* The DWARF 2 CFA column which tracks the return address.  */
-+#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM(LR_REGNUM)
-+
-+/*
-+Define this macro if GCC should produce dwarf version 2 format
-+debugging output in response to the -g option.
-+
-+To support optional call frame debugging information, you must also
-+define INCOMING_RETURN_ADDR_RTX and either set
-+RTX_FRAME_RELATED_P on the prologue insns if you use RTL for the
-+prologue, or call dwarf2out_def_cfa and dwarf2out_reg_save
-+as appropriate from TARGET_ASM_FUNCTION_PROLOGUE if you don't.
-+*/
-+#define DWARF2_DEBUGGING_INFO 1
-+
-+
-+#define DWARF2_ASM_LINE_DEBUG_INFO 1
-+#define DWARF2_FRAME_INFO 1
-+
-+
-+/******************************************************************************
-+ * Miscellaneous Parameters
-+ *****************************************************************************/
-+
-+/* ToDo: a lot */
-+
-+/*
-+An alias for a machine mode name.  This is the machine mode that
-+elements of a jump-table should have.
-+*/
-+#define CASE_VECTOR_MODE SImode
-+
-+/*
-+Define this macro to be a C expression to indicate when jump-tables
-+should contain relative addresses.  If jump-tables never contain
-+relative addresses, then you need not define this macro.
-+*/
-+#define CASE_VECTOR_PC_RELATIVE 0
-+
-+/*
-+The maximum number of bytes that a single instruction can move quickly
-+between memory and registers or between two memory locations.
-+*/
-+#define MOVE_MAX (2*UNITS_PER_WORD)
-+
-+
-+/* A C expression that is nonzero if on this machine the number of bits actually used
-+   for the count of a shift operation is equal to the number of bits needed to represent
-+   the size of the object being shifted. When this macro is nonzero, the compiler will
-+   assume that it is safe to omit a sign-extend, zero-extend, and certain bitwise 'and'
-+   instructions that truncates the count of a shift operation. On machines that have
-+   instructions that act on bit-fields at variable positions, which may include 'bit test'
-+   378 GNU Compiler Collection (GCC) Internals
-+   instructions, a nonzero SHIFT_COUNT_TRUNCATED also enables deletion of truncations
-+   of the values that serve as arguments to bit-field instructions.
-+   If both types of instructions truncate the count (for shifts) and position (for bit-field
-+   operations), or if no variable-position bit-field instructions exist, you should define
-+   this macro.
-+   However, on some machines, such as the 80386 and the 680x0, truncation only applies
-+   to shift operations and not the (real or pretended) bit-field operations. Define SHIFT_
-+   COUNT_TRUNCATED to be zero on such machines. Instead, add patterns to the 'md' file
-+   that include the implied truncation of the shift instructions.
-+   You need not dene this macro if it would always have the value of zero. */
-+#define SHIFT_COUNT_TRUNCATED 1
-+
-+/*
-+A C expression which is nonzero if on this machine it is safe to
-+convert an integer of INPREC bits to one of OUTPREC
-+bits (where OUTPREC is smaller than INPREC) by merely
-+operating on it as if it had only OUTPREC bits.
-+
-+On many machines, this expression can be 1.
-+
-+When TRULY_NOOP_TRUNCATION returns 1 for a pair of sizes for
-+modes for which MODES_TIEABLE_P is 0, suboptimal code can result.
-+If this is the case, making TRULY_NOOP_TRUNCATION return 0 in
-+such cases may improve things.
-+*/
-+#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
-+
-+/*
-+An alias for the machine mode for pointers.  On most machines, define
-+this to be the integer mode corresponding to the width of a hardware
-+pointer; SImode on 32-bit machine or DImode on 64-bit machines.
-+On some machines you must define this to be one of the partial integer
-+modes, such as PSImode.
-+
-+The width of Pmode must be at least as large as the value of
-+POINTER_SIZE.  If it is not equal, you must define the macro
-+POINTERS_EXTEND_UNSIGNED to specify how pointers are extended
-+to Pmode.
-+*/
-+#define Pmode SImode
-+
-+/*
-+An alias for the machine mode used for memory references to functions
-+being called, in call RTL expressions.  On most machines this
-+should be QImode.
-+*/
-+#define FUNCTION_MODE SImode
-+
-+
-+#define REG_S_P(x) \
-+ (REG_P (x) || (GET_CODE (x) == SUBREG && REG_P (XEXP (x, 0))))
-+
-+
-+/* If defined, modifies the length assigned to instruction INSN as a
-+   function of the context in which it is used.  LENGTH is an lvalue
-+   that contains the initially computed length of the insn and should
-+   be updated with the correct length of the insn.  */
-+#define ADJUST_INSN_LENGTH(INSN, LENGTH) \
-+  ((LENGTH) = avr32_adjust_insn_length ((INSN), (LENGTH)))
-+
-+
-+#define CLZ_DEFINED_VALUE_AT_ZERO(mode, value) \
-+  (value = 32, (mode == SImode))
-+
-+#define CTZ_DEFINED_VALUE_AT_ZERO(mode, value) \
-+  (value = 32, (mode == SImode))
-+
-+#define UNITS_PER_SIMD_WORD UNITS_PER_WORD
-+
-+#define STORE_FLAG_VALUE 1
-+
-+enum avr32_builtins
-+{
-+  AVR32_BUILTIN_MTSR,
-+  AVR32_BUILTIN_MFSR,
-+  AVR32_BUILTIN_MTDR,
-+  AVR32_BUILTIN_MFDR,
-+  AVR32_BUILTIN_CACHE,
-+  AVR32_BUILTIN_SYNC,
-+  AVR32_BUILTIN_TLBR,
-+  AVR32_BUILTIN_TLBS,
-+  AVR32_BUILTIN_TLBW,
-+  AVR32_BUILTIN_BREAKPOINT,
-+  AVR32_BUILTIN_XCHG,
-+  AVR32_BUILTIN_LDXI,
-+  AVR32_BUILTIN_BSWAP16,
-+  AVR32_BUILTIN_BSWAP32,
-+  AVR32_BUILTIN_COP,
-+  AVR32_BUILTIN_MVCR_W,
-+  AVR32_BUILTIN_MVRC_W,
-+  AVR32_BUILTIN_MVCR_D,
-+  AVR32_BUILTIN_MVRC_D,
-+  AVR32_BUILTIN_MULSATHH_H,
-+  AVR32_BUILTIN_MULSATHH_W,
-+  AVR32_BUILTIN_MULSATRNDHH_H,
-+  AVR32_BUILTIN_MULSATRNDWH_W,
-+  AVR32_BUILTIN_MULSATWH_W,
-+  AVR32_BUILTIN_MACSATHH_W,
-+  AVR32_BUILTIN_SATADD_H,
-+  AVR32_BUILTIN_SATSUB_H,
-+  AVR32_BUILTIN_SATADD_W,
-+  AVR32_BUILTIN_SATSUB_W,
-+  AVR32_BUILTIN_MULWH_D,
-+  AVR32_BUILTIN_MULNWH_D,
-+  AVR32_BUILTIN_MACWH_D,
-+  AVR32_BUILTIN_MACHH_D,
-+  AVR32_BUILTIN_MUSFR,
-+  AVR32_BUILTIN_MUSTR,
-+  AVR32_BUILTIN_SATS,
-+  AVR32_BUILTIN_SATU,
-+  AVR32_BUILTIN_SATRNDS,
-+  AVR32_BUILTIN_SATRNDU
-+};
-+
-+
-+#define FLOAT_LIB_COMPARE_RETURNS_BOOL(MODE, COMPARISON) \
-+  ((MODE == SFmode) || (MODE == DFmode))
-+
-+#define RENAME_LIBRARY_SET ".set"
-+
-+/* Make ABI_NAME an alias for __GCC_NAME.  */
-+#define RENAME_LIBRARY(GCC_NAME, ABI_NAME)		\
-+  __asm__ (".globl\t__avr32_" #ABI_NAME "\n"		\
-+	   ".set\t__avr32_" #ABI_NAME 	\
-+	     ", __" #GCC_NAME "\n");
-+
-+/* Give libgcc functions avr32 ABI name.  */
-+#ifdef L_muldi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (muldi3, mul64)
-+#endif
-+#ifdef L_divdi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (divdi3, sdiv64)
-+#endif
-+#ifdef L_udivdi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (udivdi3, udiv64)
-+#endif
-+#ifdef L_moddi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (moddi3, smod64)
-+#endif
-+#ifdef L_umoddi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (umoddi3, umod64)
-+#endif
-+#ifdef L_ashldi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (ashldi3, lsl64)
-+#endif
-+#ifdef L_lshrdi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (lshrdi3, lsr64)
-+#endif
-+#ifdef L_ashrdi3
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (ashrdi3, asr64)
-+#endif
-+
-+#ifdef L_fixsfdi
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (fixsfdi, f32_to_s64)
-+#endif
-+#ifdef L_fixunssfdi
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (fixunssfdi, f32_to_u64)
-+#endif
-+#ifdef L_floatdidf
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (floatdidf, s64_to_f64)
-+#endif
-+#ifdef L_floatdisf
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (floatdisf, s64_to_f32)
-+#endif
-+
-+#ifdef L_addsub_sf
-+#define DECLARE_LIBRARY_RENAMES RENAME_LIBRARY (addsf3, f32_add); RENAME_LIBRARY (subsf3, f32_sub)
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/gcc/config/avr32/avr32.md
-@@ -0,0 +1,4694 @@
-+;;   AVR32 machine description file.
-+;;   Copyright 2003-2006 Atmel Corporation.
-+;;
-+;;   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+;;
-+;;   This file is part of GCC.
-+;;
-+;;   This program is free software; you can redistribute it and/or modify
-+;;   it under the terms of the GNU General Public License as published by
-+;;   the Free Software Foundation; either version 2 of the License, or
-+;;   (at your option) any later version.
-+;;
-+;;   This program is distributed in the hope that it will be useful,
-+;;   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;;   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+;;   GNU General Public License for more details.
-+;;
-+;;   You should have received a copy of the GNU General Public License
-+;;   along with this program; if not, write to the Free Software
-+;;   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+;; -*- Mode: Scheme -*-
-+
-+(define_attr "type" "alu,alu2,alu_sat,mulhh,mulwh,mulww_w,mulww_d,div,machh_w,macww_w,macww_d,branch,call,load,load_rm,store,load2,load4,store2,store4,fmul,fcmps,fcmpd,fcast,fmv,fmvcpu,fldd,fstd,flds,fsts,fstm"
-+  (const_string "alu"))
-+
-+
-+(define_attr "cc" "none,set_vncz,set_ncz,set_cz,set_z,bld,compare,clobber,call_set,fpcompare,from_fpcc"
-+  (const_string "none"))
-+
-+
-+(define_attr "pipeline" "ap,uc"
-+  (const_string "ap"))
-+
-+(define_attr "length" ""
-+  (const_int 4))
-+
-+
-+;; Uses of UNSPEC in this file:
-+(define_constants
-+  [(UNSPEC_PUSHM                0)
-+   (UNSPEC_POPM                 1)
-+   (UNSPEC_UDIVMODSI4_INTERNAL	2)
-+   (UNSPEC_DIVMODSI4_INTERNAL   3)
-+   (UNSPEC_STM                  4)
-+   (UNSPEC_LDM                  5)
-+   (UNSPEC_MOVSICC              6)
-+   (UNSPEC_ADDSICC              7)
-+   (UNSPEC_COND_MI              8)
-+   (UNSPEC_COND_PL              9)
-+   (UNSPEC_PIC_SYM              10)
-+   (UNSPEC_PIC_BASE             11)
-+   (UNSPEC_STORE_MULTIPLE       12)
-+   (UNSPEC_STMFP                13)
-+   (UNSPEC_FPCC_TO_REG          14)
-+   (UNSPEC_REG_TO_CC            15)
-+   (UNSPEC_FORCE_MINIPOOL       16)
-+   (UNSPEC_SATS                 17)
-+   (UNSPEC_SATU                 18)
-+   (UNSPEC_SATRNDS              19)
-+   (UNSPEC_SATRNDU              20)
-+  ])
-+
-+(define_constants
-+  [(VUNSPEC_EPILOGUE   0)
-+   (VUNSPEC_CACHE      1)
-+   (VUNSPEC_MTSR       2)
-+   (VUNSPEC_MFSR       3)
-+   (VUNSPEC_BLOCKAGE   4)
-+   (VUNSPEC_SYNC       5)
-+   (VUNSPEC_TLBR       6)
-+   (VUNSPEC_TLBW       7)
-+   (VUNSPEC_TLBS       8)
-+   (VUNSPEC_BREAKPOINT 9)
-+   (VUNSPEC_MTDR       10)
-+   (VUNSPEC_MFDR       11)
-+   (VUNSPEC_MVCR       12)
-+   (VUNSPEC_MVRC       13)
-+   (VUNSPEC_COP        14)
-+   (VUNSPEC_ALIGN      15)
-+   (VUNSPEC_POOL_START 16)
-+   (VUNSPEC_POOL_END   17)
-+   (VUNSPEC_POOL_4     18)
-+   (VUNSPEC_POOL_8     19)
-+   (VUNSPEC_MUSFR      20)
-+   (VUNSPEC_MUSTR       21)
-+   ])
-+
-+(define_constants
-+  [
-+   ;; R7 = 15-7 = 8
-+   (FP_REGNUM   8)
-+   ;; Return Register = R12 = 15 - 12 = 3
-+   (RETVAL_REGNUM   3)
-+   ;; SP = R13 = 15 - 13 = 2
-+   (SP_REGNUM   2)
-+   ;; LR = R14 = 15 - 14 = 1
-+   (LR_REGNUM   1)
-+   ;; PC = R15 = 15 - 15 = 0
-+   (PC_REGNUM   0)
-+   ;; FPSR = GENERAL_REGS + 1 = 17
-+   (FPCC_REGNUM 17)
-+   ])
-+
-+
-+
-+
-+;;******************************************************************************
-+;; Macros
-+;;******************************************************************************
-+
-+;; Integer Modes for basic alu insns
-+(define_mode_macro INTM [SI HI QI])
-+(define_mode_attr  alu_cc_attr [(SI "set_vncz") (HI "clobber") (QI "clobber")])
-+
-+;; Move word modes
-+(define_mode_macro MOVM [SI V2HI V4QI])
-+
-+;; For mov/addcc insns
-+(define_mode_macro ADDCC [SI HI QI])
-+(define_mode_macro MOVCC [SI HI QI])
-+(define_mode_macro CMP [DI SI HI QI])
-+(define_mode_attr  cmp_constraint [(DI "r") (SI "rKs21") (HI "r") (QI "r")])
-+(define_mode_attr  cmp_predicate [(DI "register_operand")
-+                                  (SI "register_immediate_operand")
-+                                  (HI "register_operand")
-+                                  (QI "register_operand")])
-+
-+;; For all conditional insns
-+(define_code_macro any_cond [eq ne gt ge lt le gtu geu ltu leu])
-+(define_code_attr cond [(eq "eq") (ne "ne") (gt "gt") (ge "ge") (lt "lt") (le "le")
-+                        (gtu "hi") (geu "hs") (ltu "lo") (leu "ls")])
-+(define_code_attr invcond [(eq "ne") (ne "eq") (gt "le") (ge "lt") (lt "ge") (le "gt")
-+                           (gtu "ls") (geu "lo") (ltu "hs") (leu "hi")])
-+
-+;; For logical operations
-+(define_code_macro logical [and ior xor])
-+(define_code_attr logical_insn [(and "and") (ior "or") (xor "eor")])
-+
-+;; Load the predicates
-+(include "predicates.md")
-+
-+
-+;;******************************************************************************
-+;; Automaton pipeline description for avr32
-+;;******************************************************************************
-+
-+(define_automaton "avr32_ap")
-+
-+
-+(define_cpu_unit "is" "avr32_ap")
-+(define_cpu_unit "a1,m1,da" "avr32_ap")
-+(define_cpu_unit "a2,m2,d" "avr32_ap")
-+
-+;;Alu instructions
-+(define_insn_reservation "alu_op" 1
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "alu"))
-+  "is,a1,a2")
-+
-+(define_insn_reservation "alu2_op" 2
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "alu2"))
-+  "is,is+a1,a1+a2,a2")
-+
-+(define_insn_reservation "alu_sat_op" 2
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "alu_sat"))
-+  "is,a1,a2")
-+
-+
-+;;Mul instructions
-+(define_insn_reservation "mulhh_op" 2
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "mulhh,mulwh"))
-+  "is,m1,m2")
-+
-+(define_insn_reservation "mulww_w_op" 3
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "mulww_w"))
-+  "is,m1,m1+m2,m2")
-+
-+(define_insn_reservation "mulww_d_op" 5
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "mulww_d"))
-+  "is,m1,m1+m2,m1+m2,m2,m2")
-+
-+(define_insn_reservation "div_op" 33
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "div"))
-+  "is,m1,m1*31 + m2*31,m2")
-+
-+(define_insn_reservation "machh_w_op" 3
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "machh_w"))
-+  "is*2,m1,m2")
-+
-+
-+(define_insn_reservation "macww_w_op" 4
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "macww_w"))
-+  "is*2,m1,m1,m2")
-+
-+
-+(define_insn_reservation "macww_d_op" 6
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "macww_d"))
-+  "is*2,m1,m1+m2,m1+m2,m2")
-+
-+;;Bypasses for Mac instructions, because of accumulator cache.
-+;;Set latency as low as possible in order to let the compiler let
-+;;mul -> mac and mac -> mac combinations which use the same
-+;;accumulator cache be placed close together to avoid any
-+;;instructions which can ruin the accumulator cache come inbetween.
-+(define_bypass 4 "machh_w_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+(define_bypass 5 "macww_w_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+(define_bypass 7 "macww_d_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+
-+(define_bypass 3 "mulhh_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+(define_bypass 4 "mulww_w_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+(define_bypass 6 "mulww_d_op" "alu_op,alu2_op,alu_sat_op,load_op" "avr32_mul_waw_bypass")
-+
-+
-+;;Bypasses for all mul/mac instructions followed by an instruction
-+;;which reads the output AND writes the result to the same register.
-+;;This will generate an Write After Write hazard which gives an
-+;;extra cycle before the result is ready.
-+(define_bypass 0 "machh_w_op" "machh_w_op" "avr32_valid_macmac_bypass")
-+(define_bypass 0 "macww_w_op" "macww_w_op" "avr32_valid_macmac_bypass")
-+(define_bypass 0 "macww_d_op" "macww_d_op" "avr32_valid_macmac_bypass")
-+
-+(define_bypass 0 "mulhh_op" "machh_w_op" "avr32_valid_mulmac_bypass")
-+(define_bypass 0 "mulww_w_op" "macww_w_op" "avr32_valid_mulmac_bypass")
-+(define_bypass 0 "mulww_d_op" "macww_d_op" "avr32_valid_mulmac_bypass")
-+
-+;;Branch and call instructions
-+;;We assume that all branches and rcalls are predicted correctly :-)
-+;;while calls use a lot of cycles.
-+(define_insn_reservation "branch_op" 0
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "branch"))
-+  "nothing")
-+
-+(define_insn_reservation "call_op" 10
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "call"))
-+  "nothing")
-+
-+
-+;;Load store instructions
-+(define_insn_reservation "load_op" 2
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "load"))
-+  "is,da,d")
-+
-+(define_insn_reservation "load_rm_op" 3
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "load_rm"))
-+  "is,da,d")
-+
-+
-+(define_insn_reservation "store_op" 0
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "store"))
-+  "is,da,d")
-+
-+
-+(define_insn_reservation "load_double_op" 3
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "load2"))
-+  "is,da,da+d,d")
-+
-+(define_insn_reservation "load_quad_op" 4
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "load4"))
-+  "is,da,da+d,da+d,d")
-+
-+(define_insn_reservation "store_double_op" 0
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "store2"))
-+  "is,da,da+d,d")
-+
-+
-+(define_insn_reservation "store_quad_op" 0
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "store4"))
-+  "is,da,da+d,da+d,d")
-+
-+;;For store the operand to write to memory is read in d and
-+;;the real latency between any instruction and a store is therefore
-+;;one less than for the instructions which reads the operands in the first
-+;;excecution stage
-+(define_bypass 2 "load_double_op" "store_double_op" "avr32_store_bypass")
-+(define_bypass 3 "load_quad_op" "store_quad_op" "avr32_store_bypass")
-+(define_bypass 1 "load_op" "store_op" "avr32_store_bypass")
-+(define_bypass 2 "load_rm_op" "store_op" "avr32_store_bypass")
-+(define_bypass 1 "alu_sat_op" "store_op" "avr32_store_bypass")
-+(define_bypass 1 "alu2_op" "store_op" "avr32_store_bypass")
-+(define_bypass 1 "mulhh_op" "store_op" "avr32_store_bypass")
-+(define_bypass 2 "mulww_w_op" "store_op" "avr32_store_bypass")
-+(define_bypass 4 "mulww_d_op" "store_op" "avr32_store_bypass" )
-+(define_bypass 2 "machh_w_op" "store_op" "avr32_store_bypass")
-+(define_bypass 3 "macww_w_op" "store_op" "avr32_store_bypass")
-+(define_bypass 5 "macww_d_op" "store_op" "avr32_store_bypass")
-+
-+
-+; Bypass for load double operation. If only the first loaded word is needed
-+; then the latency is 2
-+(define_bypass 2 "load_double_op"
-+                 "load_op,load_rm_op,alu_sat_op, alu2_op, alu_op, mulhh_op, mulww_w_op,
-+                  mulww_d_op, machh_w_op, macww_w_op, macww_d_op"
-+                 "avr32_valid_load_double_bypass")
-+
-+; Bypass for load quad operation. If only the first or second loaded word is needed
-+; we set the latency to 2
-+(define_bypass 2 "load_quad_op"
-+                 "load_op,load_rm_op,alu_sat_op, alu2_op, alu_op, mulhh_op, mulww_w_op,
-+                  mulww_d_op, machh_w_op, macww_w_op, macww_d_op"
-+                 "avr32_valid_load_quad_bypass")
-+
-+
-+;;******************************************************************************
-+;; End of Automaton pipeline description for avr32
-+;;******************************************************************************
-+
-+
-+
-+;;=============================================================================
-+;; move
-+;;-----------------------------------------------------------------------------
-+
-+;;== char - 8 bits ============================================================
-+(define_expand "movqi"
-+  [(set (match_operand:QI 0 "nonimmediate_operand" "")
-+	(match_operand:QI 1 "general_operand" ""))]
-+  ""
-+  {
-+   if ( !no_new_pseudos ){
-+     if (GET_CODE (operands[1]) == MEM && optimize){
-+         rtx reg = gen_reg_rtx (SImode);
-+
-+         emit_insn (gen_zero_extendqisi2 (reg, operands[1]));
-+         operands[1] = gen_lowpart (QImode, reg);
-+     }
-+
-+     /* One of the ops has to be in a register.  */
-+     if (GET_CODE (operands[0]) == MEM)
-+       operands[1] = force_reg (QImode, operands[1]);
-+   }
-+
-+  })
-+
-+(define_insn "*movqi_internal"
-+  [(set (match_operand:QI 0 "nonimmediate_operand" "=r,r,m,r")
-+	(match_operand:QI 1 "general_operand"  "rKs08,m,r,i"))]
-+  ""
-+  "@
-+   mov\t%0, %1
-+   ld.ub\t%0, %1
-+   st.b\t%0, %1
-+   mov\t%0, %1"
-+  [(set_attr "length" "2,4,4,4")
-+   (set_attr "type" "alu,load_rm,store,alu")])
-+
-+
-+
-+;;== short - 16 bits ==========================================================
-+(define_expand "movhi"
-+  [(set (match_operand:HI 0 "nonimmediate_operand" "")
-+	(match_operand:HI 1 "general_operand" ""))]
-+  ""
-+  {
-+   if ( !no_new_pseudos ){
-+     if (GET_CODE (operands[1]) == MEM && optimize){
-+         rtx reg = gen_reg_rtx (SImode);
-+
-+         emit_insn (gen_extendhisi2 (reg, operands[1]));
-+         operands[1] = gen_lowpart (HImode, reg);
-+     }
-+
-+     /* One of the ops has to be in a register.  */
-+     if (GET_CODE (operands[0]) == MEM)
-+       operands[1] = force_reg (HImode, operands[1]);
-+   }
-+
-+  })
-+
-+(define_insn "*movhi_internal"
-+  [(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,m,r")
-+	(match_operand:HI 1 "general_operand"  "rKs08,m,r,i"))]
-+  ""
-+  "@
-+   mov\t%0, %1
-+   ld.sh\t%0, %1
-+   st.h\t%0, %1
-+   mov\t%0, %1"
-+  [(set_attr "length" "2,4,4,4")
-+   (set_attr "type" "alu,load_rm,store,alu")])
-+
-+
-+;;== int - 32 bits ============================================================
-+
-+(define_expand "movmisalignsi"
-+  [(set (match_operand:SI 0 "nonimmediate_operand" "")
-+	(match_operand:SI 1 "nonimmediate_operand" ""))]
-+  "TARGET_UNALIGNED_WORD"
-+  {
-+  }
-+)
-+
-+(define_expand "mov<mode>"
-+  [(set (match_operand:MOVM 0 "nonimmediate_operand" "")
-+	(match_operand:MOVM 1 "general_operand" ""))]
-+  ""
-+  {
-+
-+    /* One of the ops has to be in a register.  */
-+    if (GET_CODE (operands[0]) == MEM)
-+      operands[1] = force_reg (<MODE>mode, operands[1]);
-+
-+
-+    /* Check for out of range immediate constants as these may
-+       occur during reloading, since it seems like reload does
-+       not check if the immediate is legitimate. Don't know if
-+       this is a bug? */
-+    if ( reload_in_progress
-+         && GET_CODE(operands[1]) == CONST_INT
-+         && !avr32_const_ok_for_constraint_p(INTVAL(operands[1]), 'K', "Ks21") ){
-+        operands[1] = force_const_mem(SImode, operands[1]);
-+    }
-+
-+    if ( (flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS)
-+         && !avr32_legitimate_pic_operand_p(operands[1]) )
-+      operands[1] = legitimize_pic_address (operands[1], <MODE>mode,
-+                                            (no_new_pseudos ? operands[0] : 0));
-+    else if ( flag_pic && avr32_address_operand(operands[1], GET_MODE(operands[1])) )
-+      /* If we have an address operand then this function uses the pic register. */
-+      current_function_uses_pic_offset_table = 1;
-+  })
-+
-+
-+(define_insn "mov<mode>_internal"
-+  [(set (match_operand:MOVM 0 "nonimmediate_operand"     "=r,r,r,m,r")
-+	(match_operand:MOVM 1 "general_operand"  "rKs08,Ks21,m,r,W"))]
-+  ""
-+  {
-+    switch (which_alternative) {
-+      case 0:
-+      case 1: return "mov\t%0, %1";
-+      case 2:
-+        if ( (REG_P(XEXP(operands[1], 0))
-+              && REGNO(XEXP(operands[1], 0)) == SP_REGNUM)
-+             || (GET_CODE(XEXP(operands[1], 0)) == PLUS
-+                 && REGNO(XEXP(XEXP(operands[1], 0), 0)) == SP_REGNUM
-+	         && GET_CODE(XEXP(XEXP(operands[1], 0), 1)) == CONST_INT
-+	         && INTVAL(XEXP(XEXP(operands[1], 0), 1)) % 4 == 0
-+	         && INTVAL(XEXP(XEXP(operands[1], 0), 1)) <= 0x1FC) )
-+          return "lddsp\t%0, %1";
-+	else if ( avr32_const_pool_ref_operand(operands[1], GET_MODE(operands[1])) )
-+          return "lddpc\t%0, %1";
-+        else
-+          return "ld.w\t%0, %1";
-+      case 3:
-+        if ( (REG_P(XEXP(operands[0], 0))
-+              && REGNO(XEXP(operands[0], 0)) == SP_REGNUM)
-+             || (GET_CODE(XEXP(operands[0], 0)) == PLUS
-+                 && REGNO(XEXP(XEXP(operands[0], 0), 0)) == SP_REGNUM
-+	         && GET_CODE(XEXP(XEXP(operands[0], 0), 1)) == CONST_INT
-+	         && INTVAL(XEXP(XEXP(operands[0], 0), 1)) % 4 == 0
-+	         && INTVAL(XEXP(XEXP(operands[0], 0), 1)) <= 0x1FC) )
-+          return "stdsp\t%0, %1";
-+	else
-+          return "st.w\t%0, %1";
-+      case 4:
-+        if ( TARGET_HAS_ASM_ADDR_PSEUDOS )
-+          return "lda.w\t%0, %1";
-+        else
-+          return "ld.w\t%0, r6[%1@got]";
-+      default:
-+	abort();
-+    }
-+  }
-+
-+  [(set_attr "length" "2,4,4,4,8")
-+   (set_attr "type" "alu,alu,load,store,load")
-+   (set_attr "cc" "none,none,none,none,clobber")])
-+
-+
-+;; These instructions are for loading constants which cannot be loaded
-+;; directly from the constant pool because the offset is too large
-+;; high and lo_sum are used even tough for our case it should be
-+;; low and high sum :-)
-+(define_insn "mov_symbol_lo"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(high:SI (match_operand:SI 1 "immediate_operand" "i" )))]
-+  ""
-+  "mov\t%0, lo(%1)"
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")]
-+)
-+
-+(define_insn "add_symbol_hi"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(lo_sum:SI (match_dup 0)
-+                   (match_operand:SI 1 "immediate_operand" "i" )))]
-+  ""
-+  "orh\t%0, hi(%1)"
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")]
-+)
-+
-+
-+
-+;; When generating pic, we need to load the symbol offset into a register.
-+;; So that the optimizer does not confuse this with a normal symbol load
-+;; we use an unspec.  The offset will be loaded from a constant pool entry,
-+;; since that is the only type of relocation we can use.
-+(define_insn "pic_load_addr"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(unspec:SI [(match_operand:SI 1 "" "")] UNSPEC_PIC_SYM))]
-+  "flag_pic && CONSTANT_POOL_ADDRESS_P(XEXP(operands[1], 0))"
-+  "lddpc\t%0, %1"
-+  [(set_attr "type" "load")
-+   (set_attr "length" "4")]
-+)
-+
-+(define_insn "pic_compute_got_from_pc"
-+  [(set (match_operand:SI 0 "register_operand" "+r")
-+	(unspec:SI [(minus:SI (pc)
-+                              (match_dup 0))] UNSPEC_PIC_BASE))
-+   (use (label_ref (match_operand 1 "" "")))]
-+  "flag_pic"
-+  {
-+   (*targetm.asm_out.internal_label) (asm_out_file, "L",
-+	 		     CODE_LABEL_NUMBER (operands[1]));
-+   return \"rsub\t%0, pc\";
-+  }
-+  [(set_attr "cc" "clobber")
-+   (set_attr "length" "2")]
-+)
-+
-+;;== long long int - 64 bits ==================================================
-+(define_expand "movdi"
-+  [(set (match_operand:DI 0 "nonimmediate_operand" "")
-+	(match_operand:DI 1 "general_operand" ""))]
-+  ""
-+  {
-+
-+    /* One of the ops has to be in a register.  */
-+    if (GET_CODE (operands[0]) != REG)
-+      operands[1] = force_reg (DImode, operands[1]);
-+
-+  })
-+
-+
-+(define_insn_and_split "*movdi_internal"
-+  [(set (match_operand:DI 0 "nonimmediate_operand"     "=r,r,r,r,r,m")
-+	(match_operand:DI 1 "general_operand"  "r,Ks08,Ks21,G,m,r"))]
-+  ""
-+  {
-+    switch (which_alternative ){
-+    case 1:
-+    case 2:
-+      if ( INTVAL(operands[1]) < 0 )
-+        return "mov\t%0, %1\;mov\t%m0, -1";
-+      else
-+        return "mov\t%0, %1\;mov\t%m0, 0";
-+    case 0:
-+    case 3:
-+      return "mov\t%0, %1\;mov\t%m0, %m1";
-+    case 4:
-+      if ( avr32_const_pool_ref_operand(operands[1], GET_MODE(operands[1])))
-+        return "ld.d\t%0, pc[%1 - .]";
-+      else
-+        return "ld.d\t%0, %1";
-+    case 5:
-+      return "st.d\t%0, %1";
-+    default:
-+      abort();
-+    }
-+  }
-+  "reload_completed &&
-+   (REG_P(operands[0]) &&
-+   (REG_P(operands[1]) || avr32_const_double_immediate(operands[1]) ||
-+    ((GET_CODE(operands[1]) == CONST_INT) && avr32_const_ok_for_constraint_p(INTVAL(operands[1]), 'K', \"Ks21\")) ))"
-+  [(set (match_dup 0) (match_dup 1))
-+   (set (match_dup 2) (match_dup 3))]
-+  {
-+    operands[2] = gen_highpart (SImode, operands[0]);
-+    operands[0] = gen_lowpart (SImode, operands[0]);
-+    if ( REG_P(operands[1]) ){
-+      operands[3] = gen_highpart(SImode, operands[1]);
-+      operands[1] = gen_lowpart(SImode, operands[1]);
-+    } else if ( GET_CODE(operands[1]) == CONST_DOUBLE ){
-+      operands[3] = GEN_INT(CONST_DOUBLE_LOW(operands[1]));
-+      operands[1] = GEN_INT(CONST_DOUBLE_HIGH(operands[1]));
-+    } else if ( GET_CODE(operands[1]) == CONST_INT ){
-+      operands[3] = GEN_INT((INTVAL(operands[1]) < 0) ? -1 : 0);
-+      operands[1] = operands[1];
-+    } else {
-+      internal_error("Illegal operand[1] for movdi split!");
-+    }
-+  }
-+
-+  [(set_attr "length" "4,6,8,8,4,4")
-+   (set_attr "type" "alu2,alu2,alu2,alu2,load2,store2")])
-+
-+
-+;;== 128 bits ==================================================
-+(define_expand "movti"
-+  [(set (match_operand:TI 0 "nonimmediate_operand" "")
-+	(match_operand:TI 1 "general_operand" ""))]
-+  ""
-+  {
-+
-+    /* One of the ops has to be in a register.  */
-+    if (GET_CODE (operands[0]) != REG)
-+      operands[1] = force_reg (TImode, operands[1]);
-+
-+    /* We must fix any pre_dec for loads and post_inc stores */
-+    if ( GET_CODE (operands[0]) == MEM
-+         && GET_CODE (XEXP(operands[0],0)) == POST_INC ){
-+       emit_move_insn(gen_rtx_MEM(TImode, XEXP(XEXP(operands[0],0),0)), operands[1]);
-+       emit_insn(gen_addsi3(XEXP(XEXP(operands[0],0),0), XEXP(XEXP(operands[0],0),0), GEN_INT(GET_MODE_SIZE(TImode))));
-+       DONE;
-+    }
-+
-+    if ( GET_CODE (operands[1]) == MEM
-+         && GET_CODE (XEXP(operands[1],0)) == PRE_DEC ){
-+       emit_insn(gen_addsi3(XEXP(XEXP(operands[1],0),0), XEXP(XEXP(operands[1],0),0), GEN_INT(-GET_MODE_SIZE(TImode))));
-+       emit_move_insn(operands[0], gen_rtx_MEM(TImode, XEXP(XEXP(operands[1],0),0)));
-+       DONE;
-+    }
-+
-+    if (GET_CODE (operands[1]) == CONST_INT){
-+      unsigned int sign_extend = (INTVAL(operands[1]) < 0) ? 0xFFFFFFFF : 0;
-+      emit_move_insn(gen_rtx_SUBREG(SImode, operands[0], 12), operands[1]);
-+      emit_move_insn(gen_rtx_SUBREG(SImode, operands[0], 8), GEN_INT(sign_extend));
-+      emit_move_insn(gen_rtx_SUBREG(SImode, operands[0], 4), GEN_INT(sign_extend));
-+      emit_move_insn(gen_rtx_SUBREG(SImode, operands[0], 0), GEN_INT(sign_extend));
-+      DONE;
-+    }
-+
-+    if (GET_CODE (operands[0]) == REG
-+        && GET_CODE (operands[1]) == REG){
-+      emit_move_insn(gen_rtx_SUBREG(SImode, operands[0], 12), gen_rtx_SUBREG(SImode, operands[1], 12));
-+      emit_move_insn(gen_rtx_SUBREG(SImode, operands[0], 8), gen_rtx_SUBREG(SImode, operands[1], 8));
-+      emit_move_insn(gen_rtx_SUBREG(SImode, operands[0], 4), gen_rtx_SUBREG(SImode, operands[1], 4));
-+      emit_move_insn(gen_rtx_SUBREG(SImode, operands[0], 0), gen_rtx_SUBREG(SImode, operands[1], 0));
-+      DONE;
-+    }
-+  })
-+
-+
-+(define_insn "*movti_internal"
-+  [(set (match_operand:TI 0 "nonimmediate_operand"  "=r,r, <RKu00,r")
-+	(match_operand:TI 1 "loadti_operand"   " r,RKu00>,r,m"))]
-+  ""
-+  "@
-+   mov\t%T0, %T1\;mov\t%U0, %U1\;mov\t%L0, %L1\;mov\t%B0, %B1
-+   ldm\t%p1, %0
-+   stm\t%p0, %1
-+   ldm\t%p1, %0"
-+  [(set_attr "length" "8,4,4,4")
-+   (set_attr "type" "alu,load4,store4,load4")])
-+
-+
-+;;== float - 32 bits ==========================================================
-+(define_expand "movsf"
-+  [(set (match_operand:SF 0 "nonimmediate_operand" "")
-+	(match_operand:SF 1 "general_operand" ""))]
-+  ""
-+  {
-+
-+
-+    /* One of the ops has to be in a register.  */
-+    if (GET_CODE (operands[0]) != REG)
-+      operands[1] = force_reg (SFmode, operands[1]);
-+
-+  })
-+
-+(define_insn "*movsf_internal"
-+  [(set (match_operand:SF 0 "nonimmediate_operand"     "=r,r,r,m")
-+	(match_operand:SF 1 "general_operand"  "r,G,m,r"))]
-+  "TARGET_SOFT_FLOAT"
-+  {
-+    switch (which_alternative) {
-+      case 0:
-+      case 1: return "mov\t%0, %1";
-+      case 2:
-+        if ( (REG_P(XEXP(operands[1], 0))
-+              && REGNO(XEXP(operands[1], 0)) == SP_REGNUM)
-+             || (GET_CODE(XEXP(operands[1], 0)) == PLUS
-+                 && REGNO(XEXP(XEXP(operands[1], 0), 0)) == SP_REGNUM
-+	         && GET_CODE(XEXP(XEXP(operands[1], 0), 1)) == CONST_INT
-+	         && INTVAL(XEXP(XEXP(operands[1], 0), 1)) % 4 == 0
-+	         && INTVAL(XEXP(XEXP(operands[1], 0), 1)) <= 0x1FC) )
-+          return "lddsp\t%0, %1";
-+          else if ( avr32_const_pool_ref_operand(operands[1], GET_MODE(operands[1])) )
-+          return "lddpc\t%0, %1";
-+        else
-+          return "ld.w\t%0, %1";
-+      case 3:
-+        if ( (REG_P(XEXP(operands[0], 0))
-+              && REGNO(XEXP(operands[0], 0)) == SP_REGNUM)
-+             || (GET_CODE(XEXP(operands[0], 0)) == PLUS
-+                 && REGNO(XEXP(XEXP(operands[0], 0), 0)) == SP_REGNUM
-+	         && GET_CODE(XEXP(XEXP(operands[0], 0), 1)) == CONST_INT
-+	         && INTVAL(XEXP(XEXP(operands[0], 0), 1)) % 4 == 0
-+	         && INTVAL(XEXP(XEXP(operands[0], 0), 1)) <= 0x1FC) )
-+          return "stdsp\t%0, %1";
-+	else
-+          return "st.w\t%0, %1";
-+      default:
-+	abort();
-+    }
-+  }
-+
-+  [(set_attr "length" "2,4,4,4")
-+   (set_attr "type" "alu,alu,load,store")])
-+
-+
-+
-+;;== double - 64 bits =========================================================
-+(define_expand "movdf"
-+  [(set (match_operand:DF 0 "nonimmediate_operand" "")
-+	(match_operand:DF 1 "general_operand" ""))]
-+  ""
-+  {
-+    /* One of the ops has to be in a register.  */
-+    if (GET_CODE (operands[0]) != REG){
-+      operands[1] = force_reg (DFmode, operands[1]);
-+    }
-+  })
-+
-+
-+(define_insn_and_split "*movdf_internal"
-+  [(set (match_operand:DF 0 "nonimmediate_operand"     "=r,r,r,m")
-+	(match_operand:DF 1 "general_operand"  "r,G,m,r"))]
-+  "TARGET_SOFT_FLOAT"
-+  {
-+    switch (which_alternative ){
-+    case 0:
-+    case 1:
-+      return "mov\t%0, %1\;mov\t%m0, %m1";
-+    case 2:
-+      if ( avr32_const_pool_ref_operand(operands[1], GET_MODE(operands[1])))
-+        return "ld.d\t%0, pc[%1 - .]";
-+      else
-+        return "ld.d\t%0, %1";
-+    case 3:
-+      return "st.d\t%0, %1";
-+    default:
-+      abort();
-+    }
-+  }
-+  "TARGET_SOFT_FLOAT
-+   && reload_completed
-+   && (REG_P(operands[0]) && REG_P(operands[1]))"
-+  [(set (match_dup 0) (match_dup 1))
-+   (set (match_dup 2) (match_dup 3))]
-+  "
-+   {
-+    operands[2] = gen_highpart (SImode, operands[0]);
-+    operands[0] = gen_lowpart (SImode, operands[0]);
-+    operands[3] = gen_highpart(SImode, operands[1]);
-+    operands[1] = gen_lowpart(SImode, operands[1]);
-+   }
-+  "
-+
-+  [(set_attr "length" "4,8,4,4")
-+   (set_attr "type" "alu2,alu2,load2,store2")])
-+
-+
-+
-+
-+;;=============================================================================
-+;; Move chunks of memory
-+;;=============================================================================
-+
-+(define_expand "movmemsi"
-+  [(match_operand:BLK 0 "general_operand" "")
-+   (match_operand:BLK 1 "general_operand" "")
-+   (match_operand:SI 2 "const_int_operand" "")
-+   (match_operand:SI 3 "const_int_operand" "")]
-+  ""
-+  "
-+   if (avr32_gen_movmemsi (operands))
-+     DONE;
-+   FAIL;
-+  "
-+  )
-+
-+
-+
-+
-+;;=============================================================================
-+;; Bit field instructions
-+;;-----------------------------------------------------------------------------
-+;; Instructions to insert or extract bit-fields
-+;;=============================================================================
-+
-+(define_insn "insv"
-+  [ (set (zero_extract:SI (match_operand:SI 0 "register_operand" "+r")
-+                          (match_operand:SI 1 "immediate_operand" "Ku05")
-+                          (match_operand:SI 2 "immediate_operand" "Ku05"))
-+         (match_operand 3 "register_operand" "r"))]
-+  ""
-+  "bfins\t%0, %3, %2, %1"
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "set_ncz")])
-+
-+
-+
-+
-+(define_insn "extv"
-+  [ (set (match_operand:SI 0 "register_operand" "=r")
-+         (sign_extract:SI (match_operand:SI 1 "register_operand" "r")
-+                          (match_operand:SI 2 "immediate_operand" "Ku05")
-+                          (match_operand:SI 3 "immediate_operand" "Ku05")))]
-+  ""
-+  "bfexts\t%0, %1, %3, %2"
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "set_ncz")])
-+
-+
-+(define_insn "extzv"
-+  [ (set (match_operand:SI 0 "register_operand" "=r")
-+         (zero_extract:SI (match_operand:SI 1 "register_operand" "r")
-+                          (match_operand:SI 2 "immediate_operand" "Ku05")
-+                          (match_operand:SI 3 "immediate_operand" "Ku05")))]
-+  ""
-+  "bfextu\t%0, %1, %3, %2"
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "set_ncz")])
-+
-+
-+
-+;;=============================================================================
-+;; Some peepholes for avoiding unnecessary cast instructions
-+;; followed by bfins.
-+;;-----------------------------------------------------------------------------
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (zero_extend:SI (match_operand:QI 1 "register_operand" "")))
-+   (set (zero_extract:SI (match_operand 2 "register_operand" "")
-+                         (match_operand:SI 3 "immediate_operand" "")
-+                         (match_operand:SI 4 "immediate_operand" ""))
-+        (match_dup 0))]
-+  "((peep2_reg_dead_p(2, operands[0]) &&
-+    (INTVAL(operands[3]) <= 8)))"
-+  [(set (zero_extract:SI (match_dup 2)
-+                         (match_dup 3)
-+                         (match_dup 4))
-+        (match_dup 1))]
-+  )
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (zero_extend:SI (match_operand:HI 1 "register_operand" "")))
-+   (set (zero_extract:SI (match_operand 2 "register_operand" "")
-+                         (match_operand:SI 3 "immediate_operand" "")
-+                         (match_operand:SI 4 "immediate_operand" ""))
-+        (match_dup 0))]
-+  "((peep2_reg_dead_p(2, operands[0]) &&
-+    (INTVAL(operands[3]) <= 16)))"
-+  [(set (zero_extract:SI (match_dup 2)
-+                         (match_dup 3)
-+                         (match_dup 4))
-+        (match_dup 1))]
-+  )
-+
-+;;=============================================================================
-+;; push bytes
-+;;-----------------------------------------------------------------------------
-+;; Implements the push instruction
-+;;=============================================================================
-+(define_insn "pushm"
-+  [(set (mem:BLK (pre_dec:BLK (reg:SI SP_REGNUM)))
-+        (unspec:BLK [(match_operand 0 "const_int_operand" "")]
-+                    UNSPEC_PUSHM))]
-+  ""
-+  {
-+    if (INTVAL(operands[0])) {
-+      return "pushm\t%r0";
-+    } else {
-+      return "";
-+    }
-+  }
-+  [(set_attr "type" "store")
-+   (set_attr "length" "2")
-+   (set_attr "cc" "none")])
-+
-+(define_insn "stm"
-+  [(unspec [(match_operand 0 "register_operand" "r")
-+            (match_operand 1 "const_int_operand" "")
-+            (match_operand 2 "const_int_operand" "")]
-+	   UNSPEC_STM)]
-+  ""
-+  {
-+    if (INTVAL(operands[1])) {
-+      if (INTVAL(operands[2]) != 0)
-+         return "stm\t--%0, %s1";
-+      else
-+         return "stm\t%0, %s1";
-+    } else {
-+      return "";
-+    }
-+  }
-+  [(set_attr "type" "store")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+
-+
-+(define_insn "popm"
-+  [(unspec [(match_operand 0 "const_int_operand" "")]
-+	   UNSPEC_POPM)]
-+  ""
-+  {
-+    if (INTVAL(operands[0])) {
-+      return "popm   %r0";
-+    } else {
-+      return "";
-+    }
-+  }
-+  [(set_attr "type" "load")
-+   (set_attr "length" "2")])
-+
-+
-+
-+;;=============================================================================
-+;; add
-+;;-----------------------------------------------------------------------------
-+;; Adds reg1 with reg2 and puts the result in reg0.
-+;;=============================================================================
-+(define_insn "add<mode>3"
-+  [(set (match_operand:INTM 0 "register_operand" "=r,r,r,r,r")
-+	(plus:INTM (match_operand:INTM 1 "register_operand" "%0,r,0,r,0")
-+                   (match_operand:INTM 2 "avr32_add_operand" "r,r,Is08,Is16,Is21")))]
-+  ""
-+  "@
-+   add     %0, %2
-+   add     %0, %1, %2
-+   sub     %0, %n2
-+   sub     %0, %1, %n2
-+   sub     %0, %n2"
-+
-+  [(set_attr "length" "2,4,2,4,4")
-+   (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+(define_insn "*addsi3_lsl"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(plus:SI (ashift:SI (match_operand:SI 1 "register_operand" "r")
-+                            (match_operand:SI 3 "avr32_add_shift_immediate_operand" "Ku02"))
-+                 (match_operand:SI 2 "register_operand" "r")))]
-+  ""
-+  "add     %0, %2, %1 << %3"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "set_vncz")])
-+
-+
-+(define_insn "*addsi3_mul"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "r")
-+                          (match_operand:SI 3 "immediate_operand" "Ku04" ))
-+                 (match_operand:SI 2 "register_operand" "r")))]
-+  "(INTVAL(operands[3]) == 0) || (INTVAL(operands[3]) == 2) ||
-+   (INTVAL(operands[3]) == 4) || (INTVAL(operands[3]) == 8)"
-+  "add     %0, %2, %1 << %p3"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "set_vncz")])
-+
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (ashift:SI (match_operand:SI 1 "register_operand" "")
-+                   (match_operand:SI 2 "immediate_operand" "")))
-+   (set (match_operand:SI 3 "register_operand" "")
-+	(plus:SI (match_dup 0)
-+                 (match_operand:SI 4 "register_operand" "")))]
-+  "(peep2_reg_dead_p(2, operands[0]) &&
-+    (INTVAL(operands[2]) < 4 && INTVAL(operands[2]) > 0))"
-+  [(set (match_dup 3)
-+	(plus:SI (ashift:SI (match_dup 1)
-+                            (match_dup 2))
-+                 (match_dup 4)))]
-+  )
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (ashift:SI (match_operand:SI 1 "register_operand" "")
-+                   (match_operand:SI 2 "immediate_operand" "")))
-+   (set (match_operand:SI 3 "register_operand" "")
-+	(plus:SI (match_operand:SI 4 "register_operand" "")
-+                 (match_dup 0)))]
-+  "(peep2_reg_dead_p(2, operands[0]) &&
-+    (INTVAL(operands[2]) < 4 && INTVAL(operands[2]) > 0))"
-+  [(set (match_dup 3)
-+	(plus:SI (ashift:SI (match_dup 1)
-+                            (match_dup 2))
-+                 (match_dup 4)))]
-+  )
-+
-+(define_insn "adddi3"
-+  [(set (match_operand:DI 0 "register_operand" "=r,r")
-+	(plus:DI (match_operand:DI 1 "register_operand" "%r,0")
-+		 (match_operand:DI 2 "register_operand" "r,r")))]
-+  ""
-+  "@
-+   add     %0, %1, %2\;adc    %m0, %m1, %m2
-+   add     %0, %2\;adc    %m0, %m0, %m2"
-+  [(set_attr "length" "8,6")
-+   (set_attr "type" "alu2")
-+   (set_attr "cc" "set_vncz")])
-+
-+
-+
-+;;=============================================================================
-+;; subtract
-+;;-----------------------------------------------------------------------------
-+;; Subtract reg2 or immediate value from reg0 and puts the result in reg0.
-+;;=============================================================================
-+
-+(define_peephole2
-+  [(set (match_operand:QI 0 "register_operand" "")
-+	(minus:QI (match_operand:QI 1 "general_operand" "")
-+		  (match_operand:QI 2 "general_operand" "")))
-+   (set (match_operand:QI 3 "register_operand" "")
-+        (match_dup 0))]
-+  "peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 3)
-+        (minus:QI (match_dup 1) (match_dup 2)))]
-+  )
-+
-+(define_peephole
-+  [(set (match_operand:QI 0 "register_operand" "")
-+	(minus:QI (match_operand:QI 1 "immediate_operand" "Ks08")
-+		  (match_operand:QI 2 "register_operand" "r")))
-+   (set (match_operand:QI 3 "register_operand" "r")
-+        (match_dup 0))]
-+  "dead_or_set_p(insn, operands[0])"
-+  "rsub    %3, %2, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "clobber")]
-+  )
-+
-+
-+
-+(define_insn "sub<mode>3"
-+  [(set (match_operand:INTM 0 "general_operand" "=r,r,r,r,r,r,r")
-+	(minus:INTM (match_operand:INTM 1 "nonmemory_operand" "0,r,0,r,0,r,Ks08")
-+		  (match_operand:INTM 2 "nonmemory_operand" "r,r,Ks08,Ks16,Ks21,0,r")))]
-+  ""
-+  "@
-+   sub     %0, %2
-+   sub     %0, %1, %2
-+   sub     %0, %2
-+   sub     %0, %1, %2
-+   sub     %0, %2
-+   rsub    %0, %1
-+   rsub    %0, %2, %1"
-+  [(set_attr "length" "2,4,2,4,4,2,4")
-+   (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+(define_insn "*sub<mode>3_mul"
-+  [(set (match_operand:INTM 0 "register_operand" "=r,r,r")
-+	(minus:INTM (match_operand:INTM 1 "register_operand" "r,0,r")
-+                    (mult:INTM (match_operand:INTM 2 "register_operand" "r,r,0")
-+                               (match_operand:SI 3 "immediate_operand" "Ku04,Ku04,Ku04" ))))]
-+  "(INTVAL(operands[3]) == 0) || (INTVAL(operands[3]) == 2) ||
-+   (INTVAL(operands[3]) == 4) || (INTVAL(operands[3]) == 8)"
-+  "@
-+   sub     %0, %1, %2 << %p3
-+   sub     %0, %0, %2 << %p3
-+   sub     %0, %1, %0 << %p3"
-+  [(set_attr "length" "4,4,4")
-+   (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+(define_insn "*sub<mode>3_lsl"
-+  [(set (match_operand:INTM 0 "register_operand" "=r")
-+	(minus:INTM (ashift:INTM (match_operand:INTM 1 "register_operand" "r")
-+                                 (match_operand:SI 3 "avr32_add_shift_immediate_operand" "Ku02"))
-+                    (match_operand:INTM 2 "register_operand" "r")))]
-+  ""
-+  "sub     %0, %2, %1 << %3"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "<INTM:alu_cc_attr>")])
-+
-+
-+(define_insn "subdi3"
-+  [(set (match_operand:DI 0 "register_operand" "=r,r")
-+	(minus:DI (match_operand:DI 1 "register_operand" "%r,0")
-+		 (match_operand:DI 2 "register_operand" "r,r")))]
-+  ""
-+  "@
-+   sub     %0, %1, %2\;sbc    %m0, %m1, %m2
-+   sub     %0, %2\;sbc    %m0, %m0, %m2"
-+  [(set_attr "length" "8,6")
-+   (set_attr "type" "alu2")
-+   (set_attr "cc" "set_vncz")])
-+
-+
-+
-+;;=============================================================================
-+;; multiply
-+;;-----------------------------------------------------------------------------
-+;; Multiply op1 and op2 and put the value in op0.
-+;;=============================================================================
-+
-+
-+(define_insn "mulqi3"
-+  [(set (match_operand:QI 0 "register_operand"         "=r,r,r")
-+	(mult:QI (match_operand:QI 1 "register_operand" "%0,r,r")
-+		 (match_operand:QI 2 "avr32_mul_operand" "r,r,Ks08")))]
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+      return "mul     %0, %2";
-+    case 1:
-+      return "mul     %0, %1, %2";
-+    case 2:
-+      return "mul     %0, %1, %2";
-+    default:
-+      abort();
-+   }
-+  }
-+  [(set_attr "type" "mulww_w,mulww_w,mulwh")
-+   (set_attr "length" "2,4,4")
-+   (set_attr "cc" "none")])
-+
-+(define_insn "mulsi3"
-+  [(set (match_operand:SI 0 "register_operand"         "=r,r,r")
-+	(mult:SI (match_operand:SI 1 "register_operand" "%0,r,r")
-+		 (match_operand:SI 2 "avr32_mul_operand" "r,r,Ks08")))]
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+      return "mul     %0, %2";
-+    case 1:
-+      return "mul     %0, %1, %2";
-+    case 2:
-+      return "mul     %0, %1, %2";
-+    default:
-+      abort();
-+   }
-+  }
-+  [(set_attr "type" "mulww_w,mulww_w,mulwh")
-+   (set_attr "length" "2,4,4")
-+   (set_attr "cc" "none")])
-+
-+
-+(define_insn "mulhisi3"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(mult:SI
-+	 (sign_extend:SI (match_operand:HI 1 "register_operand" "%r"))
-+	 (sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
-+  "TARGET_DSP"
-+  "mulhh.w %0, %1:b, %2:b"
-+  [(set_attr "type" "mulhh")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+(define_peephole2
-+  [(match_scratch:DI 6 "r")
-+   (set (match_operand:SI 0 "register_operand" "")
-+	(mult:SI
-+	 (sign_extend:SI (match_operand:HI 1 "register_operand" ""))
-+         (sign_extend:SI (match_operand:HI 2 "register_operand" ""))))
-+   (set (match_operand:SI 3 "register_operand" "")
-+        (ashiftrt:SI (match_dup 0)
-+                     (const_int 16)))]
-+  "TARGET_DSP
-+   && (peep2_reg_dead_p(1, operands[0]) || (REGNO(operands[0]) == REGNO(operands[3])))"
-+  [(set (match_dup 4) (sign_extend:SI (match_dup 1)))
-+   (set (match_dup 6)
-+        (ashift:DI (mult:DI (sign_extend:DI (match_dup 4))
-+                            (sign_extend:DI (match_dup 2)))
-+                   (const_int 16)))
-+   (set (match_dup 3) (match_dup 5))]
-+
-+  "{
-+     operands[4] = gen_rtx_REG(SImode, REGNO(operands[1]));
-+     operands[5] = gen_highpart (SImode, operands[4]);
-+   }"
-+  )
-+
-+(define_insn "mulnhisi3"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (mult:SI
-+         (sign_extend:SI (neg:HI (match_operand:HI 1 "register_operand" "r")))
-+         (sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
-+  "TARGET_DSP"
-+  "mulnhh.w %0, %1:b, %2:b"
-+  [(set_attr "type" "mulhh")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+(define_insn "machisi3"
-+  [(set (match_operand:SI 0 "register_operand" "+r")
-+	(plus:SI (mult:SI
-+                  (sign_extend:SI (match_operand:HI 1 "register_operand" "%r"))
-+                  (sign_extend:SI (match_operand:HI 2 "register_operand" "r")))
-+                 (match_dup 0)))]
-+  "TARGET_DSP"
-+  "machh.w %0, %1:b, %2:b"
-+  [(set_attr "type" "machh_w")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+
-+
-+(define_insn "mulsidi3"
-+  [(set (match_operand:DI 0 "register_operand" "=r")
-+	(mult:DI
-+	 (sign_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+	 (sign_extend:DI (match_operand:SI 2 "register_operand" "r"))))]
-+  ""
-+  "muls.d  %0, %1, %2"
-+  [(set_attr "type" "mulww_d")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+(define_insn "umulsidi3"
-+  [(set (match_operand:DI 0 "register_operand" "=r")
-+	(mult:DI
-+	 (zero_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+	 (zero_extend:DI (match_operand:SI 2 "register_operand" "r"))))]
-+  ""
-+  "mulu.d  %0, %1, %2"
-+  [(set_attr "type" "mulww_d")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+(define_insn "*mulaccsi3"
-+  [(set (match_operand:SI 0 "register_operand" "+r")
-+	(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "%r")
-+			  (match_operand:SI 2 "register_operand" "r"))
-+		 (match_dup 0)))]
-+  ""
-+  "mac     %0, %1, %2"
-+  [(set_attr "type" "macww_w")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+(define_insn "mulaccsidi3"
-+  [(set (match_operand:DI 0 "register_operand" "+r")
-+	(plus:DI (mult:DI
-+		  (sign_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+		  (sign_extend:DI (match_operand:SI 2 "register_operand" "r")))
-+		 (match_dup 0)))]
-+  ""
-+  "macs.d  %0, %1, %2"
-+  [(set_attr "type" "macww_d")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+(define_insn "umulaccsidi3"
-+  [(set (match_operand:DI 0 "register_operand" "+r")
-+	(plus:DI (mult:DI
-+		  (zero_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+		  (zero_extend:DI (match_operand:SI 2 "register_operand" "r")))
-+		 (match_dup 0)))]
-+  ""
-+  "macu.d  %0, %1, %2"
-+  [(set_attr "type" "macww_d")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+
-+
-+;; Try to avoid Write-After-Write hazards for mul operations
-+;; if it can be done
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+	(mult:SI
-+	 (sign_extend:SI (match_operand 1 "general_operand" ""))
-+         (sign_extend:SI (match_operand 2 "general_operand" ""))))
-+   (set (match_dup 0)
-+	(match_operator:SI 3 "alu_operator" [(match_dup 0)
-+                                             (match_operand 4 "general_operand" "")]))]
-+  "peep2_reg_dead_p(1, operands[2])"
-+  [(set (match_dup 5)
-+        (mult:SI
-+         (sign_extend:SI (match_dup 1))
-+         (sign_extend:SI (match_dup 2))))
-+   (set (match_dup 0)
-+	(match_op_dup 3 [(match_dup 5)
-+                         (match_dup 4)]))]
-+  "{operands[5] = gen_rtx_REG(SImode, REGNO(operands[2]));}"
-+  )
-+
-+
-+
-+;;=============================================================================
-+;; DSP instructions
-+;;=============================================================================
-+(define_insn "mulsathh_h"
-+  [(set (match_operand:HI 0 "register_operand" "=r")
-+        (ss_truncate:HI (ashiftrt:SI (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "%r"))
-+                                              (sign_extend:SI (match_operand:HI 2 "register_operand" "r")))
-+                                     (const_int 15))))]
-+  "TARGET_DSP"
-+  "mulsathh.h\t%0, %1:b, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulhh")])
-+
-+(define_insn "mulsatrndhh_h"
-+  [(set (match_operand:HI 0 "register_operand" "=r")
-+        (ss_truncate:HI (ashiftrt:SI
-+                         (plus:SI (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "%r"))
-+                                           (sign_extend:SI (match_operand:HI 2 "register_operand" "r")))
-+                                  (const_int 1073741824))
-+                         (const_int 15))))]
-+  "TARGET_DSP"
-+  "mulsatrndhh.h\t%0, %1:b, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulhh")])
-+
-+(define_insn "mulsathh_w"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (ss_truncate:SI (ashift:DI (mult:DI (sign_extend:DI (match_operand:HI 1 "register_operand" "%r"))
-+                                            (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+                                   (const_int 1))))]
-+  "TARGET_DSP"
-+  "mulsathh.w\t%0, %1:b, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulhh")])
-+
-+(define_insn "mulsatwh_w"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (ss_truncate:SI (ashiftrt:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "r"))
-+                                              (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+                                     (const_int 15))))]
-+  "TARGET_DSP"
-+  "mulsatwh.w\t%0, %1, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulwh")])
-+
-+(define_insn "mulsatrndwh_w"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (ss_truncate:SI (ashiftrt:DI (plus:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "r"))
-+                                                       (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+                                              (const_int 1073741824))
-+                                     (const_int 15))))]
-+  "TARGET_DSP"
-+  "mulsatrndwh.w\t%0, %1, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulwh")])
-+
-+(define_insn "macsathh_w"
-+  [(set (match_operand:SI 0 "register_operand" "+r")
-+        (plus:SI (match_dup 0)
-+                 (ss_truncate:SI (ashift:DI (mult:DI (sign_extend:DI (match_operand:HI 1 "register_operand" "%r"))
-+                                                     (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+                                            (const_int 1)))))]
-+  "TARGET_DSP"
-+  "macsathh.w\t%0, %1:b, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulhh")])
-+
-+
-+(define_insn "mulwh_d"
-+  [(set (match_operand:DI 0 "register_operand" "=r")
-+        (ashift:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "r"))
-+                            (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+                   (const_int 16)))]
-+  "TARGET_DSP"
-+  "mulwh.d\t%0, %1, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulwh")])
-+
-+
-+(define_insn "mulnwh_d"
-+  [(set (match_operand:DI 0 "register_operand" "=r")
-+        (ashift:DI (mult:DI (not:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "r")))
-+                            (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+                   (const_int 16)))]
-+  "TARGET_DSP"
-+  "mulnwh.d\t%0, %1, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulwh")])
-+
-+(define_insn "macwh_d"
-+  [(set (match_operand:DI 0 "register_operand" "+r")
-+        (plus:DI (match_dup 0)
-+                 (ashift:DI (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "%r"))
-+                                     (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))
-+                            (const_int 16))))]
-+  "TARGET_DSP"
-+  "macwh.d\t%0, %1, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulwh")])
-+
-+(define_insn "machh_d"
-+  [(set (match_operand:DI 0 "register_operand" "+r")
-+        (plus:DI (match_dup 0)
-+                 (mult:DI (sign_extend:DI (match_operand:HI 1 "register_operand" "%r"))
-+                          (sign_extend:DI (match_operand:HI 2 "register_operand" "r")))))]
-+  "TARGET_DSP"
-+  "machh.d\t%0, %1:b, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "mulwh")])
-+
-+(define_insn "satadd_w"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (ss_plus:SI (match_operand:SI 1 "register_operand" "r")
-+                    (match_operand:SI 2 "register_operand" "r")))]
-+  "TARGET_DSP"
-+  "satadd.w\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "alu_sat")])
-+
-+(define_insn "satsub_w"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (ss_minus:SI (match_operand:SI 1 "register_operand" "r")
-+                     (match_operand:SI 2 "register_operand" "r")))]
-+  "TARGET_DSP"
-+  "satsub.w\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "alu_sat")])
-+
-+(define_insn "satadd_h"
-+  [(set (match_operand:HI 0 "register_operand" "=r")
-+        (ss_plus:HI (match_operand:HI 1 "register_operand" "r")
-+                    (match_operand:HI 2 "register_operand" "r")))]
-+  "TARGET_DSP"
-+  "satadd.h\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "alu_sat")])
-+
-+(define_insn "satsub_h"
-+  [(set (match_operand:HI 0 "register_operand" "=r")
-+        (ss_minus:HI (match_operand:HI 1 "register_operand" "r")
-+                     (match_operand:HI 2 "register_operand" "r")))]
-+  "TARGET_DSP"
-+  "satsub.h\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")
-+   (set_attr "type" "alu_sat")])
-+
-+
-+;;=============================================================================
-+;; smin
-+;;-----------------------------------------------------------------------------
-+;; Set reg0 to the smallest value of reg1 and reg2. It is used for signed
-+;; values in the registers.
-+;;=============================================================================
-+(define_insn "sminsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(smin:SI (match_operand:SI 1 "register_operand" "r")
-+		 (match_operand:SI 2 "register_operand" "r")))]
-+  ""
-+  "min     %0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+;;=============================================================================
-+;; smax
-+;;-----------------------------------------------------------------------------
-+;; Set reg0 to the largest value of reg1 and reg2. It is used for signed
-+;; values in the registers.
-+;;=============================================================================
-+(define_insn "smaxsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(smax:SI (match_operand:SI 1 "register_operand" "r")
-+		 (match_operand:SI 2 "register_operand" "r")))]
-+  ""
-+  "max     %0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+
-+;;=============================================================================
-+;; Logical operations
-+;;-----------------------------------------------------------------------------
-+
-+;; Split up simple DImode logical operations.  Simply perform the logical
-+;; operation on the upper and lower halves of the registers.
-+(define_split
-+  [(set (match_operand:DI 0 "register_operand" "")
-+	(match_operator:DI 6 "logical_binary_operator"
-+	  [(match_operand:DI 1 "register_operand" "")
-+	   (match_operand:DI 2 "register_operand" "")]))]
-+  "reload_completed"
-+  [(set (match_dup 0) (match_op_dup:SI 6 [(match_dup 1) (match_dup 2)]))
-+   (set (match_dup 3) (match_op_dup:SI 6 [(match_dup 4) (match_dup 5)]))]
-+  "
-+  {
-+    operands[3] = gen_highpart (SImode, operands[0]);
-+    operands[0] = gen_lowpart (SImode, operands[0]);
-+    operands[4] = gen_highpart (SImode, operands[1]);
-+    operands[1] = gen_lowpart (SImode, operands[1]);
-+    operands[5] = gen_highpart (SImode, operands[2]);
-+    operands[2] = gen_lowpart (SImode, operands[2]);
-+  }"
-+)
-+
-+;;=============================================================================
-+;; Logical operations with shifted operand
-+;;=============================================================================
-+(define_insn "<code>si_lshift"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (logical:SI (match_operator:SI 4 "logical_shift_operator"
-+                                       [(match_operand:SI 2 "register_operand" "r")
-+                                        (match_operand:SI 3 "immediate_operand" "Ku05")])
-+                    (match_operand:SI 1 "register_operand" "r")))]
-+  ""
-+  {
-+   if ( GET_CODE(operands[4]) == ASHIFT )
-+      return "<logical_insn>\t%0, %1, %2 << %3";
-+   else
-+      return "<logical_insn>\t%0, %1, %2 >> %3";
-+      }
-+
-+  [(set_attr "cc" "set_z")]
-+)
-+
-+
-+;;************************************************
-+;; Peepholes for detecting logical operantions
-+;; with shifted operands
-+;;************************************************
-+
-+(define_peephole
-+  [(set (match_operand:SI 3 "register_operand" "")
-+        (match_operator:SI 5 "logical_shift_operator"
-+                           [(match_operand:SI 1 "register_operand" "")
-+                            (match_operand:SI 2 "immediate_operand" "")]))
-+   (set (match_operand:SI 0 "register_operand" "")
-+        (logical:SI (match_operand:SI 4 "register_operand" "")
-+                    (match_dup 3)))]
-+  "(dead_or_set_p(insn, operands[3])) || (REGNO(operands[3]) == REGNO(operands[0]))"
-+  {
-+   if ( GET_CODE(operands[5]) == ASHIFT )
-+      return "<logical_insn>\t%0, %4, %1 << %2";
-+   else
-+      return "<logical_insn>\t%0, %4, %1 >> %2";
-+  }
-+  [(set_attr "cc" "set_z")]
-+  )
-+
-+(define_peephole
-+  [(set (match_operand:SI 3 "register_operand" "")
-+        (match_operator:SI 5 "logical_shift_operator"
-+                           [(match_operand:SI 1 "register_operand" "")
-+                            (match_operand:SI 2 "immediate_operand" "")]))
-+   (set (match_operand:SI 0 "register_operand" "")
-+        (logical:SI (match_dup 3)
-+                    (match_operand:SI 4 "register_operand" "")))]
-+  "(dead_or_set_p(insn, operands[3])) || (REGNO(operands[3]) == REGNO(operands[0]))"
-+  {
-+   if ( GET_CODE(operands[5]) == ASHIFT )
-+      return "<logical_insn>\t%0, %4, %1 << %2";
-+   else
-+      return "<logical_insn>\t%0, %4, %1 >> %2";
-+  }
-+  [(set_attr "cc" "set_z")]
-+  )
-+
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (match_operator:SI 5 "logical_shift_operator"
-+                           [(match_operand:SI 1 "register_operand" "")
-+                            (match_operand:SI 2 "immediate_operand" "")]))
-+   (set (match_operand:SI 3 "register_operand" "")
-+        (logical:SI (match_operand:SI 4 "register_operand" "")
-+                    (match_dup 0)))]
-+  "(peep2_reg_dead_p(2, operands[0])) || (REGNO(operands[3]) == REGNO(operands[0]))"
-+
-+  [(set (match_dup 3)
-+        (logical:SI  (match_op_dup:SI 5 [(match_dup 1) (match_dup 2)])
-+                     (match_dup 4)))]
-+
-+  ""
-+)
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (match_operator:SI 5 "logical_shift_operator"
-+                           [(match_operand:SI 1 "register_operand" "")
-+                            (match_operand:SI 2 "immediate_operand" "")]))
-+   (set (match_operand:SI 3 "register_operand" "")
-+        (logical:SI (match_dup 0)
-+                    (match_operand:SI 4 "register_operand" "")))]
-+  "(peep2_reg_dead_p(2, operands[0])) || (REGNO(operands[3]) == REGNO(operands[0]))"
-+
-+  [(set (match_dup 3)
-+        (logical:SI (match_op_dup:SI 5 [(match_dup 1) (match_dup 2)])
-+                    (match_dup 4)))]
-+
-+  ""
-+)
-+
-+
-+;;=============================================================================
-+;; and
-+;;-----------------------------------------------------------------------------
-+;; Store the result after a bitwise logical-and between reg0 and reg2 in reg0.
-+;;=============================================================================
-+
-+(define_insn "andnsi"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (and:SI (match_operand:SI 1 "register_operand" "0")
-+                (not:SI (match_operand:SI 2 "register_operand" "r"))))]
-+  ""
-+  "andn    %0, %2"
-+  [(set_attr "cc" "set_z")
-+   (set_attr "length" "2")]
-+)
-+
-+
-+
-+
-+(define_insn "andsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=r, r, r, r")
-+	(and:SI (match_operand:SI 1 "register_operand" "%0, r, 0, r")
-+                (match_operand:SI 2 "nonmemory_operand" "r, M, i, r")))]
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+         return "and\t%0, %2";
-+    case 1:
-+        {
-+         int i, first_set = -1;
-+         /* Search for first bit set in mask */
-+         for ( i = 31; i >= 0; --i )
-+           if ( INTVAL(operands[2]) & (1 << i) ){
-+             first_set = i;
-+             break;
-+           }
-+         operands[2] = gen_rtx_CONST_INT(SImode, first_set + 1);
-+         return "bfextu\t%0, %1, 0, %2";
-+        }
-+    case 2:
-+         if ( one_bit_cleared_operand(operands[2], VOIDmode) ){
-+             int bitpos;
-+             for ( bitpos = 0; bitpos < 32; bitpos++ )
-+               if ( !(INTVAL(operands[2]) & (1 << bitpos)) )
-+                 break;
-+             operands[2] = gen_rtx_CONST_INT(SImode, bitpos);
-+             return "cbr\t%0, %2";
-+         } else if ( (INTVAL(operands[2]) >= 0) &&
-+                     (INTVAL(operands[2]) <= 65535) )
-+             return "andl\t%0, %2, COH";
-+         else if ( (INTVAL(operands[2]) < 0) &&
-+                   (INTVAL(operands[2]) >= -65536 ) )
-+             return "andl\t%0, lo(%2)";
-+         else if ( ((INTVAL(operands[2]) & 0xffff) == 0xffff) )
-+             return "andh\t%0, hi(%2)";
-+         else if ( ((INTVAL(operands[2]) & 0xffff) == 0x0) )
-+             return "andh\t%0, hi(%2), COH";
-+         else
-+             return "andh\t%0, hi(%2)\;andl\t%0, lo(%2)";
-+    case 3:
-+         return "and\t%0, %1, %2";
-+    default:
-+	 abort();
-+    }
-+  }
-+
-+  [(set_attr "length" "2,4,8,4")
-+   (set_attr "cc" "set_z")])
-+
-+
-+(define_insn "anddi3"
-+  [(set (match_operand:DI 0 "register_operand" "=&r,&r")
-+	(and:DI (match_operand:DI 1 "register_operand" "%0,r")
-+                (match_operand:DI 2 "register_operand" "r,r")))]
-+  ""
-+  "#"
-+  [(set_attr "length" "8")
-+   (set_attr "cc" "clobber")]
-+)
-+
-+;;=============================================================================
-+;; or
-+;;-----------------------------------------------------------------------------
-+;; Store the result after a bitwise inclusive-or between reg0 and reg2 in reg0.
-+;;=============================================================================
-+
-+(define_insn "iorsi3"
-+  [(set (match_operand:SI 0 "register_operand"          "=r,r,r")
-+	(ior:SI (match_operand:SI 1 "register_operand"  "%0,0,r" )
-+		(match_operand:SI 2 "nonmemory_operand" "r ,i,r")))]
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+         return "or\t%0, %2";
-+    case 1:
-+         if ( one_bit_set_operand(operands[2], VOIDmode) ){
-+             int bitpos;
-+             for (bitpos = 0; bitpos < 32; bitpos++)
-+               if (INTVAL(operands[2]) & (1 << bitpos))
-+                 break;
-+             operands[2] = gen_rtx_CONST_INT( SImode, bitpos);
-+             return "sbr\t%0, %2";
-+         } else if ( (INTVAL(operands[2]) >= 0) &&
-+              (INTVAL(operands[2]) <= 65535) )
-+             return "orl\t%0, %2";
-+         else if ( ((INTVAL(operands[2]) & 0xffff) == 0x0) )
-+             return "orh\t%0, hi(%2)";
-+         else
-+             return "orh\t%0, hi(%2)\;orl\t%0, lo(%2)";
-+    case 2:
-+         return "or\t%0, %1, %2";
-+    default:
-+	 abort();
-+    }
-+  }
-+  [(set_attr "length" "2,8,4")
-+   (set_attr "cc" "set_z")])
-+
-+
-+;(define_insn "iorsi3"
-+;  [(set (match_operand:SI 0 "register_operand" "=r, r, r")
-+;	(ior:SI (match_operand:SI 1 "avr32_logical_insn_operand" "r, r, rA" )
-+;		(match_operand:SI 2 "register_operand" "0, i, r")))]
-+;  ""
-+;  {
-+;   switch (which_alternative){
-+;    case 0:
-+;         return "or     %0, %2";
-+;    case 1:
-+;         if ( one_bit_set_operand(operands[2], VOIDmode) ){
-+;             int i, bitpos;
-+;             for ( i = 0; i < 32; i++ )
-+;                if ( INTVAL(operands[2]) & (1 << i) ){
-+;                   bitpos = i;
-+;                   break;
-+;                }
-+;             operands[2] = gen_rtx_CONST_INT( SImode, bitpos);
-+;             return "sbr    %0, %2";
-+;         } else if ( (INTVAL(operands[2]) >= 0) &&
-+;              (INTVAL(operands[2]) <= 65535) )
-+;             return "orl    %0, %2";
-+;         else if ( ((INTVAL(operands[2]) & 0xffff) == 0x0) )
-+;             return "orh    %0, hi(%2)";
-+;         else
-+;             return "orh    %0, hi(%2)\;orl    %0, lo(%2)";
-+;    case 2:
-+;         return "or     %0, %2, %1";
-+;    }
-+;  }
-+;  [(set_attr "length" "2,8,4")
-+;   (set_attr "cc" "set_z")])
-+
-+(define_insn "iordi3"
-+  [(set (match_operand:DI 0 "register_operand" "=&r,&r")
-+	(ior:DI (match_operand:DI 1 "register_operand" "%0,r")
-+                (match_operand:DI 2 "register_operand" "r,r")))]
-+  ""
-+  "#"
-+  [(set_attr "length" "8")
-+   (set_attr "cc" "clobber")]
-+)
-+
-+;;=============================================================================
-+;; xor bytes
-+;;-----------------------------------------------------------------------------
-+;; Store the result after a bitwise exclusive-or between reg0 and reg2 in reg0.
-+;;=============================================================================
-+
-+(define_insn "xorsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
-+	(xor:SI (match_operand:SI 1 "register_operand" "0,0,r")
-+		(match_operand:SI 2 "nonmemory_operand" "r,i,r")))]
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+         return "eor     %0, %2";
-+    case 1:
-+         if ( (INTVAL(operands[2]) >= 0) &&
-+              (INTVAL(operands[2]) <= 65535) )
-+             return "eorl    %0, %2";
-+         else if ( ((INTVAL(operands[2]) & 0xffff) == 0x0) )
-+             return "eorh    %0, hi(%2)";
-+         else
-+             return "eorh    %0, hi(%2)\;eorl    %0, lo(%2)";
-+    case 2:
-+         return "eor     %0, %1, %2";
-+    default:
-+	 abort();
-+    }
-+  }
-+
-+  [(set_attr "length" "2,8,4")
-+   (set_attr "cc" "set_z")])
-+
-+(define_insn "xordi3"
-+  [(set (match_operand:DI 0 "register_operand" "=&r,&r")
-+	(xor:DI (match_operand:DI 1 "register_operand" "%0,r")
-+                (match_operand:DI 2 "register_operand" "r,r")))]
-+  ""
-+  "#"
-+  [(set_attr "length" "8")
-+   (set_attr "cc" "clobber")]
-+)
-+
-+;;=============================================================================
-+;; divmod
-+;;-----------------------------------------------------------------------------
-+;; Signed division that produces both a quotient and a remainder.
-+;;=============================================================================
-+(define_expand "divmodsi4"
-+  [(parallel [
-+     (parallel [
-+       (set (match_operand:SI 0 "register_operand" "=r")
-+	    (div:SI (match_operand:SI 1 "register_operand" "r")
-+		    (match_operand:SI 2 "register_operand" "r")))
-+       (set (match_operand:SI 3 "register_operand" "=r")
-+	    (mod:SI (match_dup 1)
-+		    (match_dup 2)))])
-+     (use (match_dup 4))])]
-+  ""
-+  {
-+    if (! no_new_pseudos) {
-+      operands[4] = gen_reg_rtx (DImode);
-+
-+      emit_insn(gen_divmodsi4_internal(operands[4],operands[1],operands[2]));
-+      emit_move_insn(operands[0], gen_rtx_SUBREG( SImode, operands[4], 4));
-+      emit_move_insn(operands[3], gen_rtx_SUBREG( SImode, operands[4], 0));
-+
-+      DONE;
-+    } else {
-+      FAIL;
-+    }
-+
-+  })
-+
-+
-+(define_insn "divmodsi4_internal"
-+  [(set (match_operand:DI 0 "register_operand" "=r")
-+	(unspec:DI [(match_operand:SI 1 "register_operand" "r")
-+		    (match_operand:SI 2 "register_operand" "r")]
-+		   UNSPEC_DIVMODSI4_INTERNAL))]
-+  ""
-+  "divs    %0, %1, %2"
-+  [(set_attr "type" "div")
-+   (set_attr "cc" "none")])
-+
-+
-+;;=============================================================================
-+;; udivmod
-+;;-----------------------------------------------------------------------------
-+;; Unsigned division that produces both a quotient and a remainder.
-+;;=============================================================================
-+(define_expand "udivmodsi4"
-+ [(parallel [
-+    (parallel [
-+      (set (match_operand:SI 0 "register_operand" "=r")
-+	   (udiv:SI (match_operand:SI 1 "register_operand" "r")
-+		    (match_operand:SI 2 "register_operand" "r")))
-+      (set (match_operand:SI 3 "register_operand" "=r")
-+	   (umod:SI (match_dup 1)
-+		    (match_dup 2)))])
-+    (use (match_dup 4))])]
-+  ""
-+  {
-+    if (! no_new_pseudos) {
-+      operands[4] = gen_reg_rtx (DImode);
-+
-+      emit_insn(gen_udivmodsi4_internal(operands[4],operands[1],operands[2]));
-+      emit_move_insn(operands[0], gen_rtx_SUBREG( SImode, operands[4], 4));
-+      emit_move_insn(operands[3], gen_rtx_SUBREG( SImode, operands[4], 0));
-+
-+      DONE;
-+    } else {
-+      FAIL;
-+    }
-+  })
-+
-+(define_insn "udivmodsi4_internal"
-+  [(set (match_operand:DI 0 "register_operand" "=r")
-+	(unspec:DI [(match_operand:SI 1 "register_operand" "r")
-+		    (match_operand:SI 2 "register_operand" "r")]
-+		   UNSPEC_UDIVMODSI4_INTERNAL))]
-+  ""
-+  "divu    %0, %1, %2"
-+  [(set_attr "type" "div")
-+   (set_attr "cc" "none")])
-+
-+
-+;;=============================================================================
-+;; Arithmetic-shift left
-+;;-----------------------------------------------------------------------------
-+;; Arithmetic-shift reg0 left by reg2 or immediate value.
-+;;=============================================================================
-+
-+(define_insn "ashlsi3"
-+  [(set (match_operand:SI 0 "register_operand"           "=r,r,r")
-+	(ashift:SI (match_operand:SI 1 "register_operand" "r,0,r")
-+		   (match_operand:SI 2 "nonmemory_operand" "r,Ku05,Ku05")))]
-+  ""
-+  "@
-+   lsl     %0, %1, %2
-+   lsl     %0, %2
-+   lsl     %0, %1, %2"
-+  [(set_attr "length" "4,2,4")
-+   (set_attr "cc" "set_ncz")])
-+
-+;;=============================================================================
-+;; Arithmetic-shift right
-+;;-----------------------------------------------------------------------------
-+;; Arithmetic-shift reg0 right by an immediate value.
-+;;=============================================================================
-+
-+(define_insn "ashrsi3"
-+  [(set (match_operand:SI 0 "register_operand"             "=r,r,r")
-+	(ashiftrt:SI (match_operand:SI 1 "register_operand" "r,0,r")
-+		     (match_operand:SI 2 "nonmemory_operand" "r,Ku05,Ku05")))]
-+  ""
-+  "@
-+   asr     %0, %1, %2
-+   asr     %0, %2
-+   asr     %0, %1, %2"
-+  [(set_attr "length" "4,2,4")
-+   (set_attr "cc" "set_ncz")])
-+
-+;;=============================================================================
-+;; Logical shift right
-+;;-----------------------------------------------------------------------------
-+;; Logical shift reg0 right by an immediate value.
-+;;=============================================================================
-+
-+(define_insn "lshrsi3"
-+  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
-+	(lshiftrt:SI (match_operand:SI 1 "register_operand" "r,0,r")
-+		     (match_operand:SI 2 "nonmemory_operand" "r,Ku05,Ku05")))]
-+  ""
-+  "@
-+   lsr     %0, %1, %2
-+   lsr     %0, %2
-+   lsr     %0, %1, %2"
-+  [(set_attr "length" "4,2,4")
-+   (set_attr "cc" "set_ncz")])
-+
-+
-+;;=============================================================================
-+;; neg
-+;;-----------------------------------------------------------------------------
-+;; Negate operand 1 and store the result in operand 0.
-+;;=============================================================================
-+(define_insn "negsi2"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(neg:SI (match_operand:SI 1 "register_operand" "0")))]
-+  ""
-+  "neg     %0"
-+  [(set_attr "length" "2")
-+   (set_attr "cc" "set_vncz")])
-+
-+;;=============================================================================
-+;; abs
-+;;-----------------------------------------------------------------------------
-+;; Store the absolute value of operand 1 into operand 0.
-+;;=============================================================================
-+(define_insn "abssi2"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(abs:SI (match_operand:SI 1 "register_operand" "0")))]
-+  ""
-+  "abs     %0"
-+  [(set_attr "length" "2")
-+   (set_attr "cc" "set_z")])
-+
-+
-+;;=============================================================================
-+;; one_cmpl
-+;;-----------------------------------------------------------------------------
-+;; Store the bitwise-complement of operand 1 into operand 0.
-+;;=============================================================================
-+
-+(define_insn "one_cmplsi2"
-+  [(set (match_operand:SI 0 "register_operand" "=r,r")
-+	(not:SI (match_operand:SI 1 "register_operand" "r,0")))]
-+  ""
-+  "@
-+   rsub    %0, %1, -1
-+   com     %0"
-+  [(set_attr "length" "4,2")
-+   (set_attr "cc" "set_z")])
-+
-+
-+;;=============================================================================
-+;; Bit load
-+;;-----------------------------------------------------------------------------
-+;; Load a bit into Z and C flags
-+;;=============================================================================
-+(define_insn "bldsi"
-+  [(set (cc0)
-+        (and:SI (match_operand:SI 0 "register_operand" "r")
-+                (match_operand:SI 1 "one_bit_set_operand" "i")))]
-+  ""
-+  "bld\t%0, %p1"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "bld")]
-+  )
-+
-+
-+;;=============================================================================
-+;; Compare
-+;;-----------------------------------------------------------------------------
-+;; Compare reg0 with reg1 or an immediate value.
-+;;=============================================================================
-+
-+(define_expand "cmpqi"
-+  [(set (cc0)
-+	(compare:QI
-+	 (match_operand:QI 0 "general_operand" "")
-+	 (match_operand:QI 1 "general_operand"  "")))]
-+  ""
-+  "{
-+
-+   if ( GET_CODE(operands[0]) != REG
-+        && GET_CODE(operands[0]) != SUBREG)
-+     operands[0] = force_reg(QImode, operands[0]);
-+
-+
-+   if ( GET_CODE(operands[1]) != REG
-+        && GET_CODE(operands[1]) != SUBREG )
-+     operands[1] = force_reg(QImode, operands[1]);
-+
-+   avr32_compare_op0 = operands[0];
-+   avr32_compare_op1 = operands[1];
-+   emit_insn(gen_cmpqi_internal(operands[0], operands[1]));
-+   DONE;
-+  }"
-+)
-+
-+(define_insn "cmpqi_internal"
-+  [(set (cc0)
-+        (compare:QI
-+         (match_operand:QI 0 "register_operand" "r")
-+         (match_operand:QI 1 "register_operand" "r")))]
-+  ""
-+  {
-+   set_next_insn_cond(insn,
-+                      avr32_output_cmp(get_next_insn_cond(insn), QImode, operands[0], operands[1]));
-+   return "";
-+  }
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "compare")])
-+
-+(define_expand "cmphi"
-+  [(set (cc0)
-+	(compare:HI
-+	 (match_operand:HI 0 "general_operand" "")
-+	 (match_operand:HI 1 "general_operand"  "")))]
-+  ""
-+  "{
-+   if ( GET_CODE(operands[0]) != REG
-+        && GET_CODE(operands[0]) != SUBREG )
-+     operands[0] = force_reg(HImode, operands[0]);
-+
-+
-+   if ( GET_CODE(operands[1]) != REG
-+        && GET_CODE(operands[1]) != SUBREG)
-+     operands[1] = force_reg(HImode, operands[1]);
-+
-+   avr32_compare_op0 = operands[0];
-+   avr32_compare_op1 = operands[1];
-+   emit_insn(gen_cmphi_internal(operands[0], operands[1]));
-+   DONE;
-+  }"
-+)
-+
-+
-+(define_insn "cmphi_internal"
-+  [(set (cc0)
-+        (compare:HI
-+         (match_operand:HI 0 "register_operand" "r")
-+         (match_operand:HI 1 "register_operand" "r")))]
-+  ""
-+  {
-+   set_next_insn_cond(insn,
-+     avr32_output_cmp(get_next_insn_cond(insn), HImode, operands[0], operands[1]));
-+   return "";
-+  }
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "compare")])
-+
-+
-+(define_expand "cmpsi"
-+  [(set (cc0)
-+	(compare:SI
-+	 (match_operand:SI 0 "general_operand" "")
-+	 (match_operand:SI 1 "general_operand"  "")))]
-+  ""
-+  "{
-+   if ( GET_CODE(operands[0]) != REG
-+        && GET_CODE(operands[0]) != SUBREG )
-+     operands[0] = force_reg(SImode, operands[0]);
-+
-+   if ( GET_CODE(operands[1]) != REG
-+        && GET_CODE(operands[1]) != SUBREG
-+        && GET_CODE(operands[1]) != CONST_INT )
-+     operands[1] = force_reg(SImode, operands[1]);
-+
-+   avr32_compare_op0 = operands[0];
-+   avr32_compare_op1 = operands[1];
-+
-+
-+   emit_insn(gen_cmpsi_internal(operands[0], operands[1]));
-+   DONE;
-+  }"
-+)
-+
-+
-+
-+
-+(define_insn "cmpsi_internal"
-+  [(set (cc0)
-+	(compare:SI
-+	 (match_operand:SI 0 "register_operand" "r, r, r")
-+	 (match_operand:SI 1 "nonmemory_operand"  "r, Ks06, Ks21")))]
-+  ""
-+  {
-+   set_next_insn_cond(insn,
-+     avr32_output_cmp(get_next_insn_cond(insn), SImode, operands[0], operands[1]));
-+   return "";
-+  }
-+
-+  [(set_attr "length" "2,2,4")
-+   (set_attr "cc" "compare")])
-+
-+
-+(define_expand "cmpdi"
-+  [(set (cc0)
-+	(compare:DI
-+	 (match_operand:DI 0 "register_operand" "")
-+	 (match_operand:DI 1 "register_operand"  "")))]
-+  ""
-+  {
-+   avr32_compare_op0 = operands[0];
-+   avr32_compare_op1 = operands[1];
-+   emit_insn(gen_cmpdi_internal(operands[0], operands[1]));
-+   DONE;
-+  }
-+)
-+
-+(define_insn "cmpdi_internal"
-+  [(set (cc0)
-+	(compare:DI
-+	 (match_operand:DI 0 "register_operand" "r")
-+	 (match_operand:DI 1 "register_operand"  "r")))]
-+  ""
-+  {
-+   set_next_insn_cond(insn,
-+     avr32_output_cmp(get_next_insn_cond(insn), DImode, operands[0], operands[1]));
-+   return "";
-+  }
-+
-+  [(set_attr "length" "6")
-+   (set_attr "type" "alu2")
-+   (set_attr "cc" "compare")])
-+
-+
-+
-+;;=============================================================================
-+;; Test if zero
-+;;-----------------------------------------------------------------------------
-+;; Compare reg against zero and set the condition codes.
-+;;=============================================================================
-+
-+
-+(define_expand "tstsi"
-+  [(set (cc0)
-+	(match_operand:SI 0 "register_operand" ""))]
-+  ""
-+  {
-+   avr32_compare_op0 = operands[0];
-+   avr32_compare_op1 = gen_rtx_CONST_INT(SImode, 0);
-+   emit_insn(gen_tstsi_internal(operands[0]));
-+   DONE;
-+  }
-+)
-+
-+(define_insn "tstsi_internal"
-+  [(set (cc0)
-+	(match_operand:SI 0 "register_operand" "r"))]
-+  ""
-+  {
-+   set_next_insn_cond(insn,
-+     avr32_output_cmp(get_next_insn_cond(insn), SImode, operands[0], const0_rtx));
-+
-+   return "";
-+  }
-+  [(set_attr "length" "2")
-+   (set_attr "cc" "compare")])
-+
-+
-+(define_expand "tstdi"
-+  [(set (cc0)
-+	(match_operand:DI 0 "register_operand" ""))]
-+  ""
-+  {
-+   avr32_compare_op0 = operands[0];
-+   avr32_compare_op1 = gen_rtx_CONST_INT(DImode, 0);
-+   emit_insn(gen_tstdi_internal(operands[0]));
-+   DONE;
-+  }
-+)
-+
-+(define_insn "tstdi_internal"
-+  [(set (cc0)
-+	(match_operand:DI 0 "register_operand" "r"))]
-+  ""
-+  {
-+   set_next_insn_cond(insn,
-+     avr32_output_cmp(get_next_insn_cond(insn), DImode, operands[0], const0_rtx));
-+   return "";
-+  }
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu2")
-+   (set_attr "cc" "compare")])
-+
-+
-+
-+;;=============================================================================
-+;; Convert operands
-+;;-----------------------------------------------------------------------------
-+;;
-+;;=============================================================================
-+(define_insn "truncdisi2"
-+  [(set (match_operand:SI 0 "general_operand" "")
-+	(truncate:SI (match_operand:DI 1 "general_operand" "")))]
-+  ""
-+  "truncdisi2")
-+
-+;;=============================================================================
-+;; Extend
-+;;-----------------------------------------------------------------------------
-+;;
-+;;=============================================================================
-+
-+
-+(define_insn "extendhisi2"
-+  [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
-+	(sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,r,<RKu00>,m")))]
-+  ""
-+  {
-+   switch ( which_alternative ){
-+     case 0:
-+       return    "casts.h\t%0";
-+     case 1:
-+       return    "bfexts\t%0, %1, 0, 16";
-+     case 2:
-+     case 3:
-+       return    "ld.sh\t%0, %1";
-+     default:
-+       abort();
-+   }
-+  }
-+  [(set_attr "length" "2,4,2,4")
-+   (set_attr "cc" "set_ncz,set_ncz,none,none")
-+   (set_attr "type" "alu,alu,load_rm,load_rm")])
-+
-+(define_insn "extendqisi2"
-+  [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
-+	(sign_extend:SI (match_operand:QI 1 "extendqi_operand" "0,r,RKu00,m")))]
-+  ""
-+  {
-+   switch ( which_alternative ){
-+     case 0:
-+       return    "casts.b\t%0";
-+     case 1:
-+       return    "bfexts\t%0, %1, 0, 8";
-+     case 2:
-+     case 3:
-+       return    "ld.sb\t%0, %1";
-+     default:
-+       abort();
-+   }
-+  }
-+  [(set_attr "length" "2,4,2,4")
-+   (set_attr "cc" "set_ncz,set_ncz,none,none")
-+   (set_attr "type" "alu,alu,load_rm,load_rm")])
-+
-+(define_insn "extendqihi2"
-+  [(set (match_operand:HI 0 "register_operand" "=r,r,r,r")
-+	(sign_extend:HI (match_operand:QI 1 "extendqi_operand" "0,r,RKu00,m")))]
-+  ""
-+  {
-+   switch ( which_alternative ){
-+     case 0:
-+       return    "casts.b\t%0";
-+     case 1:
-+       return    "bfexts\t%0, %1, 0, 8";
-+     case 2:
-+     case 3:
-+       return    "ld.sb\t%0, %1";
-+     default:
-+       abort();
-+   }
-+  }
-+  [(set_attr "length" "2,4,2,4")
-+   (set_attr "cc" "set_ncz,set_ncz,none,none")
-+   (set_attr "type" "alu,alu,load_rm,load_rm")])
-+
-+
-+;;=============================================================================
-+;; Zero-extend
-+;;-----------------------------------------------------------------------------
-+;;
-+;;=============================================================================
-+
-+(define_insn "zero_extendhisi2"
-+  [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
-+	(zero_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,r,<RKu00>,m")))]
-+  ""
-+  {
-+   switch ( which_alternative ){
-+     case 0:
-+       return    "castu.h\t%0";
-+     case 1:
-+       return    "bfextu\t%0, %1, 0, 16";
-+     case 2:
-+     case 3:
-+       return    "ld.uh\t%0, %1";
-+     default:
-+       abort();
-+   }
-+  }
-+
-+  [(set_attr "length" "2,4,2,4")
-+   (set_attr "cc" "set_ncz,set_ncz,none,none")
-+   (set_attr "type" "alu,alu,load_rm,load_rm")])
-+
-+(define_insn "zero_extendqisi2"
-+  [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
-+	(zero_extend:SI (match_operand:QI 1 "nonimmediate_operand" "0,r,<RKu00>,m")))]
-+  ""
-+  {
-+   switch ( which_alternative ){
-+     case 0:
-+       return    "castu.b\t%0";
-+     case 1:
-+       return    "bfextu\t%0, %1, 0, 8";
-+     case 2:
-+     case 3:
-+       return    "ld.ub\t%0, %1";
-+     default:
-+       abort();
-+   }
-+  }
-+  [(set_attr "length" "2,4,2,4")
-+   (set_attr "cc" "set_ncz, set_ncz, none, none")
-+   (set_attr "type" "alu, alu, load_rm, load_rm")])
-+
-+(define_insn "zero_extendqihi2"
-+  [(set (match_operand:HI 0 "register_operand" "=r,r,r,r")
-+	(zero_extend:HI (match_operand:QI 1 "nonimmediate_operand" "0,r,<RKu00>,m")))]
-+  ""
-+  {
-+   switch ( which_alternative ){
-+     case 0:
-+       return    "castu.b\t%0";
-+     case 1:
-+       return    "bfextu\t%0, %1, 0, 8";
-+     case 2:
-+     case 3:
-+       return    "ld.ub\t%0, %1";
-+     default:
-+       abort();
-+   }
-+  }
-+  [(set_attr "length" "2,4,2,4")
-+   (set_attr "cc" "set_ncz, set_ncz, none, none")
-+   (set_attr "type" "alu, alu, load_rm, load_rm")])
-+
-+
-+
-+;;=============================================================================
-+;; Conditional set register
-+;; sr{cond4}  rd
-+;;-----------------------------------------------------------------------------
-+
-+;;Because of the same issue as with conditional moves and adds we must
-+;;not separate the compare instrcution from the scc instruction as
-+;;they might be sheduled "badly".
-+
-+(define_expand "s<code>"
-+  [(set (match_operand:SI 0 "register_operand" "")
-+	(any_cond (cc0)
-+            (const_int 0)))]
-+  ""
-+  {
-+   if ( !avr32_expand_scc(<CODE>, operands) ){
-+      FAIL;
-+   }
-+   DONE;
-+  }
-+  )
-+
-+
-+(define_insn "comparesi_and_set"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(match_operator 1 "avr32_comparison_operator"
-+                        [ (compare (match_operand:SI 2 "register_operand" "r")
-+                                   (match_operand:SI 3 "general_operand" "rKs06Ks21"))
-+                          (const_int 0)]))]
-+  ""
-+  {
-+   operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[2]), operands[2], operands[3]);
-+   return "sr%1\t%0";
-+   }
-+  [(set_attr "length" "6")
-+   (set_attr "cc" "clobber")])
-+
-+(define_insn "comparehi_and_set"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(match_operator 1 "avr32_comparison_operator"
-+                        [ (compare (match_operand:HI 2 "register_operand" "r")
-+                                      (match_operand:HI 3 "register_operand" "r"))
-+                          (const_int 0)]))]
-+  ""
-+  {
-+   operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[2]), operands[2], operands[3]);
-+   return "sr%1\t%0";
-+  }
-+  [(set_attr "length" "6")
-+   (set_attr "cc" "clobber")])
-+
-+(define_insn "compareqi_and_set"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(match_operator 1 "avr32_comparison_operator"
-+                        [ (compare (match_operand:QI 2 "register_operand" "r")
-+                                      (match_operand:QI 3 "register_operand" "r"))
-+                          (const_int 0)]))]
-+  ""
-+  {
-+   operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[2]), operands[2], operands[3]);
-+   return "sr%1\t%0";
-+  }
-+  [(set_attr "length" "6")
-+   (set_attr "cc" "clobber")])
-+
-+(define_insn "*comparedi_and_set"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(match_operator 1 "avr32_comparison_operator"
-+                        [ (compare (match_operand:DI 2 "register_operand" "r")
-+                                      (match_operand:DI 3 "register_operand" "r"))
-+                          (const_int 0)]))]
-+  ""
-+  {
-+   operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[2]), operands[2], operands[3]);
-+   return "sr%1\t%0";
-+  }
-+  [(set_attr "length" "6")
-+   (set_attr "cc" "clobber")])
-+
-+(define_insn "*tstdi_and_set"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(match_operator 1 "avr32_comparison_operator"
-+                        [ (compare (match_operand:DI 2 "register_operand" "r")
-+                                   (const_int 0))
-+                          (const_int 0)]))]
-+  ""
-+  {
-+   operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[2]), operands[2], const0_rtx);
-+   return "sr%1\t%0";
-+  }
-+  [(set_attr "length" "6")
-+   (set_attr "cc" "clobber")])
-+
-+
-+
-+;;=============================================================================
-+;; Conditional branch
-+;;-----------------------------------------------------------------------------
-+;; Branch to label if the specified condition codes are set.
-+;;=============================================================================
-+; branch if negative
-+(define_insn "bmi"
-+  [(set (pc)
-+	(if_then_else (unspec:CC [(cc0) (const_int 0)] UNSPEC_COND_MI)
-+		      (label_ref (match_operand 0 "" ""))
-+		      (pc)))]
-+  ""
-+  "brmi    %0"
-+  [(set_attr "type" "branch")
-+   (set (attr "length")
-+	(cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+		    (le (minus (pc) (match_dup 0)) (const_int 256)))
-+	       (const_int 2)] ; use compact branch
-+              (const_int 4))) ; use extended branch
-+   (set_attr "cc" "none")])
-+
-+(define_insn "*bmi-reverse"
-+  [(set (pc)
-+	(if_then_else (unspec:CC [(cc0) (const_int 0)] UNSPEC_COND_MI)
-+		      (pc)
-+		      (label_ref (match_operand 0 "" ""))))]
-+  ""
-+  "brpl    %0"
-+  [(set_attr "type" "branch")
-+   (set (attr "length")
-+	(cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+		    (le (minus (pc) (match_dup 0)) (const_int 256)))
-+	       (const_int 2)] ; use compact branch
-+              (const_int 4))) ; use extended branch
-+   (set_attr "cc" "none")])
-+
-+; branch if positive
-+(define_insn "bpl"
-+  [(set (pc)
-+	(if_then_else (unspec:CC [(cc0) (const_int 0)] UNSPEC_COND_PL)
-+		      (label_ref (match_operand 0 "" ""))
-+		      (pc)))]
-+  ""
-+  "brpl    %0"
-+  [(set_attr "type" "branch")
-+   (set (attr "length")
-+	(cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+		    (le (minus (pc) (match_dup 0)) (const_int 256)))
-+	       (const_int 2)] ; use compact branch
-+              (const_int 4))) ; use extended branch
-+   (set_attr "cc" "none")])
-+
-+(define_insn "*bpl-reverse"
-+  [(set (pc)
-+	(if_then_else (unspec:CC [(cc0) (const_int 0)] UNSPEC_COND_PL)
-+		      (pc)
-+		      (label_ref (match_operand 0 "" ""))))]
-+  ""
-+  "brmi    %0"
-+  [(set_attr "type" "branch")
-+   (set (attr "length")
-+	(cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+		    (le (minus (pc) (match_dup 0)) (const_int 256)))
-+	       (const_int 2)] ; use compact branch
-+              (const_int 4))) ; use extended branch
-+   (set_attr "cc" "none")])
-+
-+; branch if equal
-+(define_insn "b<code>"
-+  [(set (pc)
-+	(if_then_else (any_cond:CC (cc0)
-+			  (const_int 0))
-+		      (label_ref (match_operand 0 "" ""))
-+		      (pc)))]
-+  ""
-+  "br<cond>    %0 "
-+  [(set_attr "type" "branch")
-+   (set (attr "length")
-+	(cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+		    (le (minus (pc) (match_dup 0)) (const_int 256)))
-+	       (const_int 2)] ; use compact branch
-+              (const_int 4))) ; use extended branch
-+   (set_attr "cc" "none")])
-+
-+
-+(define_insn "*b<code>-reverse"
-+  [(set (pc)
-+	(if_then_else (any_cond:CC (cc0)
-+			  (const_int 0))
-+		      (pc)
-+		      (label_ref (match_operand 0 "" ""))))]
-+  ""
-+  "br<invcond>    %0 "
-+  [(set_attr "type" "branch")
-+   (set (attr "length")
-+	(cond [(and (le (minus (match_dup 0) (pc)) (const_int 254))
-+		    (le (minus (pc) (match_dup 0)) (const_int 256)))
-+	       (const_int 2)] ; use compact branch
-+              (const_int 4))) ; use extended branch
-+   (set_attr "cc" "none")])
-+
-+
-+
-+;=============================================================================
-+; Conditional Add/Subtract
-+;-----------------------------------------------------------------------------
-+; sub{cond4}  Rd, imm
-+;=============================================================================
-+
-+
-+(define_expand "add<mode>cc"
-+  [(set (match_operand:ADDCC 0 "register_operand" "")
-+	(if_then_else:ADDCC (match_operand 1 "avr32_comparison_operator" "")
-+                         (match_operand:ADDCC 2 "register_immediate_operand" "")
-+                         (match_operand:ADDCC 3 "register_immediate_operand" "")))]
-+  ""
-+  {
-+   if ( avr32_expand_addcc(<MODE>mode, operands ) )
-+      DONE;
-+   else
-+      FAIL;
-+  }
-+  )
-+
-+
-+(define_insn "add<ADDCC:mode>cc_cmp<CMP:mode>"
-+  [(set (match_operand:ADDCC 0 "register_operand" "=&r")
-+	(unspec:ADDCC [(match_operand 1 "avr32_comparison_operator" "")
-+                       (match_operand:ADDCC 2 "register_operand" "0")
-+                       (match_operand:ADDCC 3 "immediate_operand" "Ks08")
-+                       (match_operand:CMP 4 "register_operand" "r")
-+                       (match_operand:CMP 5 "<CMP:cmp_predicate>" "<CMP:cmp_constraint>")
-+                       ]
-+                      UNSPEC_ADDSICC ))]
-+  ""
-+  {
-+   operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[4]), operands[4], operands[5]);
-+
-+   return "sub%1\t%0, %3";
-+  }
-+  [(set_attr "length" "8")
-+   (set_attr "cc" "clobber")])
-+
-+
-+;=============================================================================
-+; Conditional Move
-+;-----------------------------------------------------------------------------
-+; mov{cond4}  Rd, (Rs/imm)
-+;=============================================================================
-+(define_expand "mov<mode>cc"
-+  [(set (match_operand:ADDCC 0 "register_operand" "")
-+	(if_then_else:ADDCC (match_operand 1 "avr32_comparison_operator" "")
-+                            (match_operand:ADDCC 2 "register_immediate_operand" "")
-+                            (match_operand:ADDCC 3 "register_immediate_operand" "")))]
-+  ""
-+  {
-+   if ( avr32_expand_movcc(<MODE>mode, operands ) )
-+      DONE;
-+   else
-+      FAIL;
-+  }
-+  )
-+
-+(define_insn "mov<MOVCC:mode>cc_cmp<CMP:mode>"
-+  [(set (match_operand:MOVCC 0 "register_operand" "=r,r,r")
-+	(unspec:MOVCC [(match_operand 1 "avr32_comparison_operator" "")
-+                       (match_operand:MOVCC 2 "register_immediate_operand" "0,rKs08,rKs08")
-+                       (match_operand:MOVCC 3 "register_immediate_operand" "rKs08,0,rKs08")
-+                       (match_operand:CMP 4 "register_operand" "r, r, r")
-+                       (match_operand:CMP 5 "<CMP:cmp_predicate>" "<CMP:cmp_constraint>, <CMP:cmp_constraint>, <CMP:cmp_constraint>")
-+                       ]
-+                      UNSPEC_MOVSICC ))]
-+  ""
-+  {
-+   operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[4]), operands[4], operands[5]);
-+
-+   switch( which_alternative ){
-+    case 0:
-+      return "mov%i1    %0, %3";
-+    case 1:
-+      return "mov%1    %0, %2";
-+    case 2:
-+      return "mov%1    %0, %2\;mov%i1    %0, %3";
-+    default:
-+      abort();
-+    }
-+
-+
-+  }
-+  [(set_attr "length" "8,8,12")
-+   (set_attr "cc" "clobber")])
-+
-+
-+;;=============================================================================
-+;; jump
-+;;-----------------------------------------------------------------------------
-+;; Jump inside a function; an unconditional branch to a label.
-+;;=============================================================================
-+(define_insn "jump"
-+  [(set (pc)
-+	(label_ref (match_operand 0 "" "")))]
-+  ""
-+  {
-+    if (get_attr_length(insn) > 4)
-+      return "Can't jump this far";
-+    return (get_attr_length(insn) == 2 ?
-+	    "rjmp    %0" : "bral    %0");
-+  }
-+  [(set_attr "type" "branch")
-+   (set (attr "length")
-+	(cond [(and (le (minus (match_dup 0) (pc)) (const_int 1022))
-+		    (le (minus (pc) (match_dup 0)) (const_int 1024)))
-+	       (const_int 2) ; use rjmp
-+	       (le (match_dup 0) (const_int 1048575))
-+	       (const_int 4)] ; use bral
-+	      (const_int 8))) ; do something else
-+   (set_attr "cc" "none")])
-+
-+;;=============================================================================
-+;; call
-+;;-----------------------------------------------------------------------------
-+;; Subroutine call instruction returning no value.
-+;;=============================================================================
-+(define_insn "call_internal"
-+  [(parallel [(call (mem:SI (match_operand:SI 0 "avr32_call_operand" "r,U,T,W"))
-+                    (match_operand 1 "" ""))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+      return "icall\t%0";
-+    case 1:
-+      return "rcall\t%0";
-+    case 2:
-+      return "mcall\t%0";
-+    case 3:
-+      if ( TARGET_HAS_ASM_ADDR_PSEUDOS )
-+        return "call\t%0";
-+      else
-+        return "mcall\tr6[%0@got]";
-+    default:
-+      abort();
-+   }
-+  }
-+  [(set_attr "type" "call")
-+   (set_attr "length" "2,4,4,10")
-+   (set_attr "cc" "clobber")])
-+
-+
-+(define_expand "call"
-+  [(parallel [(call (match_operand:SI 0 "" "")
-+                    (match_operand 1 "" ""))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  ""
-+  {
-+   rtx call_address;
-+   if ( GET_CODE(operands[0]) != MEM )
-+      FAIL;
-+
-+   call_address = XEXP(operands[0], 0);
-+
-+   /* If assembler supports call pseudo insn and the call
-+      address is a symbol then nothing special needs to be done. */
-+   if ( TARGET_HAS_ASM_ADDR_PSEUDOS
-+        && (GET_CODE(call_address) == SYMBOL_REF) ){
-+      /* We must however mark the function as using the GOT if
-+         flag_pic is set, since the call insn might turn into
-+         a mcall using the GOT ptr register. */
-+      if ( flag_pic ){
-+         current_function_uses_pic_offset_table = 1;
-+         emit_call_insn(gen_call_internal(call_address, operands[1]));
-+         DONE;
-+      }
-+   } else {
-+     if ( flag_pic &&
-+          GET_CODE(call_address) == SYMBOL_REF ){
-+       current_function_uses_pic_offset_table = 1;
-+       emit_call_insn(gen_call_internal(call_address, operands[1]));
-+       DONE;
-+     }
-+
-+     if ( !SYMBOL_REF_RCALL_FUNCTION_P(operands[0]) ){
-+       if ( optimize_size &&
-+             GET_CODE(call_address) == SYMBOL_REF ){
-+         call_address = force_const_mem(SImode, call_address);
-+       } else {
-+         call_address = force_reg(SImode, call_address);
-+       }
-+     }
-+   }
-+   emit_call_insn(gen_call_internal(call_address, operands[1]));
-+   DONE;
-+  }
-+)
-+
-+;;=============================================================================
-+;; call_value
-+;;-----------------------------------------------------------------------------
-+;; Subrutine call instruction returning a value.
-+;;=============================================================================
-+(define_expand "call_value"
-+   [(parallel [(set (match_operand:SI 0 "" "")
-+                    (call (match_operand:SI 1 "" "")
-+                          (match_operand 2 "" "")))
-+               (clobber (reg:SI LR_REGNUM))])]
-+   ""
-+   {
-+    rtx call_address;
-+    if ( GET_CODE(operands[1]) != MEM )
-+      FAIL;
-+
-+    call_address = XEXP(operands[1], 0);
-+
-+    /* If assembler supports call pseudo insn and the call
-+       address is a symbol then nothing special needs to be done. */
-+    if ( TARGET_HAS_ASM_ADDR_PSEUDOS
-+         && (GET_CODE(call_address) == SYMBOL_REF) ){
-+       /* We must however mark the function as using the GOT if
-+          flag_pic is set, since the call insn might turn into
-+          a mcall using the GOT ptr register. */
-+       if ( flag_pic ) {
-+          current_function_uses_pic_offset_table = 1;
-+          emit_call_insn(gen_call_value_internal(operands[0], call_address, operands[2]));
-+          DONE;
-+       }
-+    } else {
-+      if ( flag_pic &&
-+           GET_CODE(call_address) == SYMBOL_REF ){
-+        current_function_uses_pic_offset_table = 1;
-+        emit_call_insn(gen_call_value_internal(operands[0], call_address, operands[2]));
-+        DONE;
-+      }
-+
-+      if ( !SYMBOL_REF_RCALL_FUNCTION_P(operands[1]) ){
-+        if ( optimize_size &&
-+             GET_CODE(call_address) == SYMBOL_REF){
-+          call_address = force_const_mem(SImode, call_address);
-+        } else {
-+          call_address = force_reg(SImode, call_address);
-+        }
-+      }
-+    }
-+    emit_call_insn(gen_call_value_internal(operands[0], call_address,
-+                                           operands[2]));
-+    DONE;
-+
-+   })
-+
-+(define_insn "call_value_internal"
-+  [(parallel [(set (match_operand 0 "register_operand" "=r,r,r,r")
-+                   (call (mem:SI (match_operand:SI 1 "avr32_call_operand" "r,U,T,W"))
-+                         (match_operand 2 "" "")))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  ;; Operand 2 not used on the AVR32.
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+      return "icall\t%1";
-+    case 1:
-+      return "rcall\t%1";
-+    case 2:
-+      return "mcall\t%1";
-+    case 3:
-+      if ( TARGET_HAS_ASM_ADDR_PSEUDOS )
-+        return "call\t%1";
-+      else
-+        return "mcall\tr6[%1@got]";
-+    default:
-+      abort();
-+   }
-+  }
-+  [(set_attr "type" "call")
-+   (set_attr "length" "2,4,4,10")
-+   (set_attr "cc" "call_set")])
-+
-+
-+;;=============================================================================
-+;; untyped_call
-+;;-----------------------------------------------------------------------------
-+;; Subrutine call instruction returning a value of any type.
-+;; The code is copied from m68k.md (except gen_blockage is removed)
-+;; Fixme!
-+;;=============================================================================
-+(define_expand "untyped_call"
-+  [(parallel [(call (match_operand 0 "avr32_call_operand" "")
-+		    (const_int 0))
-+	      (match_operand 1 "" "")
-+	      (match_operand 2 "" "")])]
-+  ""
-+  {
-+    int i;
-+
-+    emit_call_insn (GEN_CALL (operands[0], const0_rtx, NULL, const0_rtx));
-+
-+    for (i = 0; i < XVECLEN (operands[2], 0); i++) {
-+      rtx set = XVECEXP (operands[2], 0, i);
-+      emit_move_insn (SET_DEST (set), SET_SRC (set));
-+    }
-+
-+    /* The optimizer does not know that the call sets the function value
-+       registers we stored in the result block.  We avoid problems by
-+       claiming that all hard registers are used and clobbered at this
-+       point.  */
-+    emit_insn (gen_blockage ());
-+
-+    DONE;
-+  })
-+
-+
-+;;=============================================================================
-+;; return
-+;;=============================================================================
-+
-+(define_insn "return"
-+  [(return)]
-+  "USE_RETURN_INSN (FALSE)"
-+  {
-+   avr32_output_return_instruction(TRUE, FALSE, NULL, NULL);
-+   return "";
-+  }
-+  [(set_attr "length" "4")
-+   (set_attr "type" "call")]
-+  )
-+
-+(define_insn "*return_value_imm"
-+  [(parallel [(set (reg RETVAL_REGNUM) (match_operand 0 "immediate_operand" "i"))
-+              (use (reg RETVAL_REGNUM))
-+              (return)])]
-+  "USE_RETURN_INSN (FALSE) &&
-+   ((INTVAL(operands[0]) == -1) || (INTVAL(operands[0]) == 0) || (INTVAL(operands[0]) == 1))"
-+  {
-+   avr32_output_return_instruction(TRUE, FALSE, NULL, operands[0]);
-+   return "";
-+  }
-+  [(set_attr "length" "4")
-+   (set_attr "type" "call")]
-+  )
-+
-+(define_insn "*return_value_si"
-+  [(set (reg RETVAL_REGNUM) (match_operand:SI 0 "register_operand" "r"))
-+   (use (reg RETVAL_REGNUM))
-+   (return)]
-+  "USE_RETURN_INSN (TRUE)"
-+  "retal    %0";
-+  [(set_attr "type" "call")]
-+  )
-+
-+(define_insn "*return_value_hi"
-+  [(parallel [(set (reg RETVAL_REGNUM) (match_operand:HI 0 "register_operand" "r"))
-+              (use (reg RETVAL_REGNUM))
-+              (return)])]
-+  "USE_RETURN_INSN (TRUE)"
-+  "retal    %0"
-+  [(set_attr "type" "call")]
-+  )
-+
-+(define_insn "*return_value_qi"
-+  [(parallel [(set (reg RETVAL_REGNUM) (match_operand:QI 0 "register_operand" "r"))
-+              (use (reg RETVAL_REGNUM))
-+              (return)])]
-+  "USE_RETURN_INSN (TRUE)"
-+  "retal    %0"
-+  [(set_attr "type" "call")]
-+  )
-+
-+;;=============================================================================
-+;; nop
-+;;-----------------------------------------------------------------------------
-+;; No-op instruction.
-+;;=============================================================================
-+(define_insn "nop"
-+  [(const_int 0)]
-+  ""
-+  "nop"
-+  [(set_attr "length" "2")
-+   (set_attr "type" "alu")
-+   (set_attr "cc" "none")])
-+
-+;;=============================================================================
-+;; nonlocal_goto
-+;;-----------------------------------------------------------------------------
-+;; Jump from one function to a label in an outer function.
-+;; Must invalidate return stack, since the function will be exited without
-+;; a return
-+;;=============================================================================
-+(define_expand "nonlocal_goto"
-+  [(use (match_operand 0 "" ""))
-+   (use (match_operand 1 "" ""))
-+   (use (match_operand 2 "" ""))
-+   (use (match_operand 3 "" ""))]
-+  ""
-+  {
-+   emit_library_call (gen_rtx_SYMBOL_REF (Pmode, "__nonlocal_goto"),
-+		     0, VOIDmode, 3,
-+		     operands[0], SImode,
-+		     operands[1], Pmode,
-+                     operands[2], SImode);
-+
-+   DONE;
-+   }
-+)
-+
-+
-+(define_expand "builtin_longjmp"
-+  [(use (match_operand 0 "" ""))]
-+  ""
-+  {
-+   rtx ops[3];
-+
-+   ops[0] = gen_rtx_MEM (Pmode, gen_rtx_PLUS(SImode, operands[0], gen_rtx_CONST_INT(SImode,0)));
-+   ops[1] = gen_rtx_MEM (Pmode, gen_rtx_PLUS(SImode, operands[0], gen_rtx_CONST_INT(SImode,4)));
-+   ops[2] = gen_rtx_MEM (Pmode, gen_rtx_PLUS(SImode, operands[0], gen_rtx_CONST_INT(SImode,8)));
-+
-+
-+   emit_library_call (gen_rtx_SYMBOL_REF (Pmode, "__nonlocal_goto"),
-+		     0, VOIDmode, 3,
-+		     ops[0], SImode,
-+		     ops[1], Pmode,
-+                     ops[2], SImode);
-+
-+   DONE;
-+   }
-+  )
-+
-+
-+;;=============================================================================
-+;; indirect_jump
-+;;-----------------------------------------------------------------------------
-+;; Jump to an address in reg or memory.
-+;;=============================================================================
-+(define_expand "indirect_jump"
-+  [(set (pc)
-+	(match_operand:SI 0 "general_operand" "r,m"))]
-+  ""
-+  {
-+    /* One of the ops has to be in a register.  */
-+    if ( (flag_pic || TARGET_HAS_ASM_ADDR_PSEUDOS )
-+         && !avr32_legitimate_pic_operand_p(operands[0]) )
-+      operands[0] = legitimize_pic_address (operands[0], SImode, 0);
-+    else if ( flag_pic && avr32_address_operand(operands[0], GET_MODE(operands[0])) )
-+      /* If we have an address operand then this function uses the pic register. */
-+      current_function_uses_pic_offset_table = 1;
-+  })
-+
-+
-+(define_insn "indirect_jump_internal"
-+  [(set (pc)
-+	(match_operand:SI 0 "general_operand" "r,m,W"))]
-+  ""
-+  {
-+    switch( which_alternative ){
-+      case 0:
-+        return "mov\tpc, %0";
-+      case 1:
-+        if ( avr32_const_pool_ref_operand(operands[0], GET_MODE(operands[0])) )
-+          return "lddpc\tpc, %0";
-+        else
-+          return "ld.w\tpc, %0";
-+      case 2:
-+        if ( flag_pic )
-+          return "ld.w\tpc, r6[%0@got]";
-+        else
-+          return "lda.w\tpc, %0";
-+      default:
-+	abort();
-+    }
-+   }
-+  [(set_attr "length" "2,4,8")
-+   (set_attr "type" "call,call,call")
-+   (set_attr "cc" "none,none,clobber")])
-+
-+
-+;;=============================================================================
-+;; casesi
-+;;=============================================================================
-+
-+
-+(define_expand "casesi"
-+  [(match_operand:SI 0 "register_operand" "")	; index to jump on
-+   (match_operand:SI 1 "const_int_operand" "")	; lower bound
-+   (match_operand:SI 2 "const_int_operand" "")	; total range
-+   (match_operand:SI 3 "" "")			; table label
-+   (match_operand:SI 4 "" "")]			; Out of range label
-+  ""
-+  "
-+  {
-+    rtx reg;
-+    if (operands[1] != const0_rtx)
-+      {
-+        if (!avr32_const_ok_for_constraint_p(INTVAL (operands[1]), 'I', \"Is21\")){
-+          reg = force_reg(SImode, GEN_INT (INTVAL (operands[1])));
-+	  emit_insn (gen_subsi3 (reg, operands[0],
-+			         reg));
-+        } else {
-+          reg = gen_reg_rtx (SImode);
-+          emit_insn (gen_addsi3 (reg, operands[0],
-+		         	 GEN_INT (-INTVAL (operands[1]))));
-+        }
-+	operands[0] = reg;
-+      }
-+
-+    if (!avr32_const_ok_for_constraint_p(INTVAL (operands[2]), 'K', \"Ks21\"))
-+      operands[2] = force_reg (SImode, operands[2]);
-+
-+    emit_jump_insn (gen_casesi_internal (operands[0], operands[2], operands[3],
-+					 operands[4], gen_reg_rtx(SImode)));
-+    DONE;
-+  }"
-+)
-+
-+;; The USE in this pattern is needed to tell flow analysis that this is
-+;; a CASESI insn.  It has no other purpose.
-+(define_insn "casesi_internal"
-+  [(parallel [(set (pc)
-+	       (if_then_else
-+		(leu (match_operand:SI 0 "register_operand" "r")
-+		     (match_operand:SI 1 "register_immediate_operand" "rKu03"))
-+		(mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+				 (label_ref (match_operand 2 "" ""))))
-+		(label_ref (match_operand 3 "" ""))))
-+              (clobber (match_operand:SI 4 "register_operand" "=r"))
-+	      (use (label_ref (match_dup 2)))])]
-+  ""
-+  {
-+    if (flag_pic)
-+      return "cp.w\t%0, %1\;brhi\t%3\;sub\t%4, pc, -(%2 - .)\;add\tpc, %4, %0 << 2";
-+    return   "cp.w\t%0, %1\;brhi\t%3\;sub\t%4, pc, -(%2 - .)\;ld.w\tpc, %4[%0 << 2]";
-+  }
-+  [(set_attr "cc" "clobber")
-+   (set_attr "length" "16")]
-+)
-+
-+
-+(define_insn "prefetch"
-+  [(prefetch (match_operand:SI 0 "register_operand" "r")
-+	     (match_operand 1 "const_int_operand" "")
-+	     (match_operand 2 "const_int_operand" ""))]
-+  ""
-+  {
-+     return "pref\t%0[0]";
-+  }
-+
-+  [(set_attr "length" "4")
-+   (set_attr "type" "load")
-+   (set_attr "cc" "none")])
-+
-+
-+
-+;;=============================================================================
-+;; prologue
-+;;-----------------------------------------------------------------------------
-+;; This pattern, if defined, emits RTL for entry to a function. The function
-+;; entry i responsible for setting up the stack frame, initializing the frame
-+;; pointer register, saving callee saved registers, etc.
-+;;=============================================================================
-+(define_expand "prologue"
-+  [(clobber (const_int 0))]
-+  ""
-+  "
-+  avr32_expand_prologue();
-+  DONE;
-+  "
-+  )
-+
-+;;=============================================================================
-+;; eh_return
-+;;-----------------------------------------------------------------------------
-+;; This pattern, if defined, affects the way __builtin_eh_return, and
-+;; thence the call frame exception handling library routines, are
-+;; built. It is intended to handle non-trivial actions needed along
-+;; the abnormal return path.
-+;;
-+;; The address of the exception handler to which the function should
-+;; return is passed as operand to this pattern. It will normally need
-+;; to copied by the pattern to some special register or memory
-+;; location. If the pattern needs to determine the location of the
-+;; target call frame in order to do so, it may use
-+;; EH_RETURN_STACKADJ_RTX, if defined; it will have already been
-+;; assigned.
-+;;
-+;; If this pattern is not defined, the default action will be to
-+;; simply copy the return address to EH_RETURN_HANDLER_RTX. Either
-+;; that macro or this pattern needs to be defined if call frame
-+;; exception handling is to be used.
-+(define_expand "eh_return"
-+  [(use (match_operand 0 "general_operand" ""))]
-+  ""
-+  "
-+  avr32_set_return_address (operands[0]);
-+  DONE;
-+  "
-+  )
-+
-+;;=============================================================================
-+;; ffssi2
-+;;-----------------------------------------------------------------------------
-+(define_insn "ffssi2"
-+  [ (set (match_operand:SI 0 "register_operand" "=r")
-+         (ffs:SI (match_operand:SI 1 "register_operand" "r"))) ]
-+  ""
-+  "mov    %0, %1
-+   brev   %0
-+   clz    %0, %0
-+   sub    %0, -1
-+   cp     %0, 33
-+   moveq  %0, 0"
-+  [(set_attr "length" "18")
-+   (set_attr "cc" "clobber")]
-+  )
-+
-+
-+
-+;;=============================================================================
-+;; swap_h
-+;;-----------------------------------------------------------------------------
-+(define_insn "*swap_h"
-+  [ (set (match_operand:SI 0 "register_operand" "=r")
-+         (ior:SI (ashift:SI (match_dup 0) (const_int 16))
-+                 (lshiftrt:SI (match_dup 0) (const_int 16))))]
-+  ""
-+  "swap.h    %0"
-+  [(set_attr "length" "2")]
-+  )
-+
-+(define_insn_and_split "bswap_16"
-+  [ (set (match_operand:HI 0 "avr32_bswap_operand" "=r,RKs13,r")
-+         (ior:HI (and:HI (lshiftrt:HI (match_operand:HI 1 "avr32_bswap_operand" "r,r,RKs13")
-+                                      (const_int 8))
-+                         (const_int 255))
-+                 (ashift:HI (and:HI (match_dup 1)
-+                                    (const_int 255))
-+                            (const_int 8))))]
-+  ""
-+  {
-+   switch ( which_alternative ){
-+     case 0:
-+       if ( REGNO(operands[0]) == REGNO(operands[1]))
-+         return "swap.bh\t%0";
-+       else
-+         return "mov\t%0, %1\;swap.bh\t%0";
-+     case 1:
-+       return "stswp.h\t%0, %1";
-+     case 2:
-+       return "ldswp.sh\t%0, %1";
-+     default:
-+       abort();
-+     }
-+  }
-+
-+  "(reload_completed &&
-+     REG_P(operands[0]) && REG_P(operands[1])
-+     && (REGNO(operands[0]) != REGNO(operands[1])))"
-+  [(set (match_dup 0) (match_dup 1))
-+   (set (match_dup 0)
-+        (ior:HI (and:HI (lshiftrt:HI (match_dup 0)
-+                                     (const_int 8))
-+                        (const_int 255))
-+                (ashift:HI (and:HI (match_dup 0)
-+                                   (const_int 255))
-+                           (const_int 8))))]
-+  ""
-+
-+  [(set_attr "length" "4,4,4")
-+   (set_attr "type" "alu,store,load_rm")]
-+  )
-+
-+(define_insn_and_split "bswap_32"
-+  [ (set (match_operand:SI 0 "avr32_bswap_operand" "=r,RKs14,r")
-+         (ior:SI (ior:SI (lshiftrt:SI (and:SI (match_operand:SI 1 "avr32_bswap_operand" "=r,r,RKs14")
-+                                              (const_int 4278190080))
-+                                      (const_int 24))
-+                         (lshiftrt:SI (and:SI (match_dup 1)
-+                                              (const_int 16711680))
-+                                      (const_int 8)))
-+                 (ior:SI (ashift:SI (and:SI (match_dup 1)
-+                                            (const_int 65280))
-+                                    (const_int 8))
-+                         (ashift:SI (and:SI (match_dup 1)
-+                                            (const_int 255))
-+                                    (const_int 24)))))]
-+  ""
-+  {
-+    switch ( which_alternative ){
-+     case 0:
-+       if ( REGNO(operands[0]) == REGNO(operands[1]))
-+         return "swap.b\t%0";
-+       else
-+         return "mov\t%0, %1\;swap.b\t%0";
-+     case 1:
-+       return "stswp.w\t%0, %1";
-+     case 2:
-+       return "ldswp.w\t%0, %1";
-+     default:
-+       abort();
-+    }
-+  }
-+  "(reload_completed &&
-+    REG_P(operands[0]) && REG_P(operands[1])
-+    && (REGNO(operands[0]) != REGNO(operands[1])))"
-+  [(set (match_dup 0) (match_dup 1))
-+   (set (match_dup 0)
-+        (ior:SI (ior:SI (lshiftrt:SI (and:SI (match_dup 0)
-+                                             (const_int 4278190080))
-+                                     (const_int 24))
-+                        (lshiftrt:SI (and:SI (match_dup 0)
-+                                             (const_int 16711680))
-+                                     (const_int 8)))
-+                (ior:SI (ashift:SI (and:SI (match_dup 0)
-+                                           (const_int 65280))
-+                                   (const_int 8))
-+                        (ashift:SI (and:SI (match_dup 0)
-+                                           (const_int 255))
-+                                   (const_int 24)))))]
-+  ""
-+
-+  [(set_attr "length" "4,4,4")
-+   (set_attr "type" "alu,store,load_rm")]
-+  )
-+
-+
-+;;=============================================================================
-+;; blockage
-+;;-----------------------------------------------------------------------------
-+;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
-+;; all of memory.  This blocks insns from being moved across this point.
-+
-+(define_insn "blockage"
-+  [(unspec_volatile [(const_int 0)] VUNSPEC_BLOCKAGE)]
-+  ""
-+  ""
-+  [(set_attr "length" "0")]
-+)
-+
-+;;=============================================================================
-+;; clzsi2
-+;;-----------------------------------------------------------------------------
-+(define_insn "clzsi2"
-+  [ (set (match_operand:SI 0 "register_operand" "=r")
-+         (clz:SI (match_operand:SI 1 "register_operand" "r"))) ]
-+  ""
-+  "clz    %0, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "set_z")]
-+  )
-+
-+;;=============================================================================
-+;; ctzsi2
-+;;-----------------------------------------------------------------------------
-+(define_insn "ctzsi2"
-+  [ (set (match_operand:SI 0 "register_operand" "=r,r")
-+         (ctz:SI (match_operand:SI 1 "register_operand" "0,r"))) ]
-+  ""
-+  "@
-+   brev\t%0\;clz\t%0, %0
-+   mov\t%0, %1\;brev\t%0\;clz\t%0, %0"
-+  [(set_attr "length" "8")
-+   (set_attr "cc" "set_z")]
-+  )
-+
-+;;=============================================================================
-+;; cache instructions
-+;;-----------------------------------------------------------------------------
-+(define_insn "cache"
-+  [ (unspec_volatile [(match_operand:SI 0 "register_operand" "r")
-+                      (match_operand:SI 1 "immediate_operand" "Ku05")] VUNSPEC_CACHE)]
-+  ""
-+  "cache    %0[0], %1"
-+  [(set_attr "length" "4")]
-+  )
-+
-+(define_insn "sync"
-+  [ (unspec_volatile [(match_operand:SI 0 "immediate_operand" "Ku08")] VUNSPEC_SYNC)]
-+  ""
-+  "sync    %0"
-+  [(set_attr "length" "4")]
-+  )
-+
-+;;=============================================================================
-+;; TLB instructions
-+;;-----------------------------------------------------------------------------
-+(define_insn "tlbr"
-+  [ (unspec_volatile [(const_int 0)] VUNSPEC_TLBR)]
-+  ""
-+  "tlbr"
-+  [(set_attr "length" "2")]
-+  )
-+
-+(define_insn "tlbw"
-+  [ (unspec_volatile [(const_int 0)] VUNSPEC_TLBW)]
-+  ""
-+  "tlbw"
-+  [(set_attr "length" "2")]
-+  )
-+
-+(define_insn "tlbs"
-+  [ (unspec_volatile [(const_int 0)] VUNSPEC_TLBS)]
-+  ""
-+  "tlbs"
-+  [(set_attr "length" "2")]
-+  )
-+
-+;;=============================================================================
-+;; Breakpoint instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "breakpoint"
-+  [ (unspec_volatile [(const_int 0)] VUNSPEC_BREAKPOINT)]
-+  ""
-+  "breakpoint"
-+  [(set_attr "length" "2")]
-+  )
-+
-+;;=============================================================================
-+;; Xchg instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "xchg"
-+  [ (parallel [(set (match_operand:SI 0 "register_operand" "=&r")
-+                    (mem:SI (match_operand:SI 1 "register_operand" "r")))
-+               (set (mem:SI (match_operand:SI 2 "register_operand" "=1"))
-+                    (match_operand:SI 3 "register_operand" "r"))])]
-+  ""
-+  "xchg\t%0, %1, %3"
-+  [(set_attr "length" "4")]
-+  )
-+
-+;;=============================================================================
-+;; mtsr/mfsr instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "mtsr"
-+  [ (unspec_volatile [(match_operand 0 "immediate_operand" "i")
-+                      (match_operand:SI 1 "register_operand" "r")] VUNSPEC_MTSR)]
-+  ""
-+  "mtsr\t%0, %1"
-+  [(set_attr "length" "4")]
-+  )
-+
-+(define_insn "mfsr"
-+  [ (set (match_operand:SI 0 "register_operand" "=r")
-+         (unspec_volatile:SI [(match_operand 1 "immediate_operand" "i")] VUNSPEC_MFSR)) ]
-+  ""
-+  "mfsr\t%0, %1"
-+  [(set_attr "length" "4")]
-+  )
-+
-+;;=============================================================================
-+;; mtdr/mfdr instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "mtdr"
-+  [ (unspec_volatile [(match_operand 0 "immediate_operand" "i")
-+                      (match_operand:SI 1 "register_operand" "r")] VUNSPEC_MTDR)]
-+  ""
-+  "mtdr\t%0, %1"
-+  [(set_attr "length" "4")]
-+  )
-+
-+(define_insn "mfdr"
-+  [ (set (match_operand:SI 0 "register_operand" "=r")
-+         (unspec_volatile:SI [(match_operand 1 "immediate_operand" "i")] VUNSPEC_MFDR)) ]
-+  ""
-+  "mfdr\t%0, %1"
-+  [(set_attr "length" "4")]
-+  )
-+
-+;;=============================================================================
-+;; musfr
-+;;-----------------------------------------------------------------------------
-+(define_insn "musfr"
-+  [ (unspec_volatile [(match_operand:SI 0 "register_operand" "r")] VUNSPEC_MUSFR)]
-+  ""
-+  "musfr\t%0"
-+  [(set_attr "length" "2")
-+   (set_attr "cc" "clobber")]
-+  )
-+
-+(define_insn "mustr"
-+  [ (set (match_operand:SI 0 "register_operand" "=r")
-+         (unspec_volatile:SI [(const_int 0)] VUNSPEC_MUSTR)) ]
-+  ""
-+  "mustr\t%0"
-+  [(set_attr "length" "2")]
-+  )
-+
-+;;=============================================================================
-+;; Saturation Round Scale instruction
-+;;-----------------------------------------------------------------------------
-+(define_insn "sats"
-+  [ (set (match_operand:SI 0 "register_operand" "+r")
-+         (unspec:SI [(match_dup 0)
-+                     (match_operand 1 "immediate_operand" "Ku05")
-+                     (match_operand 2 "immediate_operand" "Ku05")]
-+                    UNSPEC_SATS)) ]
-+  "TARGET_DSP"
-+  "sats\t%0 >> %1, %2"
-+  [(set_attr "type" "alu_sat")
-+   (set_attr "length" "4")]
-+  )
-+
-+(define_insn "satu"
-+  [ (set (match_operand:SI 0 "register_operand" "+r")
-+         (unspec:SI [(match_dup 0)
-+                     (match_operand 1 "immediate_operand" "Ku05")
-+                     (match_operand 2 "immediate_operand" "Ku05")]
-+                    UNSPEC_SATU)) ]
-+  "TARGET_DSP"
-+  "satu\t%0 >> %1, %2"
-+  [(set_attr "type" "alu_sat")
-+   (set_attr "length" "4")]
-+  )
-+
-+(define_insn "satrnds"
-+  [ (set (match_operand:SI 0 "register_operand" "+r")
-+         (unspec:SI [(match_dup 0)
-+                     (match_operand 1 "immediate_operand" "Ku05")
-+                     (match_operand 2 "immediate_operand" "Ku05")]
-+                    UNSPEC_SATRNDS)) ]
-+  "TARGET_DSP"
-+  "satrnds\t%0 >> %1, %2"
-+  [(set_attr "type" "alu_sat")
-+   (set_attr "length" "4")]
-+  )
-+
-+(define_insn "satrndu"
-+  [ (set (match_operand:SI 0 "register_operand" "+r")
-+         (unspec:SI [(match_dup 0)
-+                     (match_operand 1 "immediate_operand" "Ku05")
-+                     (match_operand 2 "immediate_operand" "Ku05")]
-+                    UNSPEC_SATRNDU)) ]
-+  "TARGET_DSP"
-+  "sats\t%0 >> %1, %2"
-+  [(set_attr "type" "alu_sat")
-+   (set_attr "length" "4")]
-+  )
-+
-+;; Special patterns for dealing with the constant pool
-+
-+(define_insn "align_4"
-+  [(unspec_volatile [(const_int 0)] VUNSPEC_ALIGN)]
-+  ""
-+  {
-+   assemble_align (32);
-+   return "";
-+  }
-+  [(set_attr "length" "2")]
-+)
-+
-+(define_insn "consttable_start"
-+  [(unspec_volatile [(const_int 0)] VUNSPEC_POOL_START)]
-+  ""
-+  {
-+   return ".cpool";
-+  }
-+  [(set_attr "length" "0")]
-+  )
-+
-+(define_insn "consttable_end"
-+  [(unspec_volatile [(const_int 0)] VUNSPEC_POOL_END)]
-+  ""
-+  {
-+   making_const_table = FALSE;
-+   return "";
-+  }
-+  [(set_attr "length" "0")]
-+)
-+
-+
-+(define_insn "consttable_4"
-+  [(unspec_volatile [(match_operand 0 "" "")] VUNSPEC_POOL_4)]
-+  ""
-+  {
-+    making_const_table = TRUE;
-+    switch (GET_MODE_CLASS (GET_MODE (operands[0])))
-+      {
-+      case MODE_FLOAT:
-+      {
-+        REAL_VALUE_TYPE r;
-+        char real_string[1024];
-+        REAL_VALUE_FROM_CONST_DOUBLE (r, operands[0]);
-+        real_to_decimal(real_string, &r, 1024, 0, 1);
-+        asm_fprintf (asm_out_file, "\t.float\t%s\n", real_string);
-+        break;
-+      }
-+      default:
-+        assemble_integer (operands[0], 4, 0, 1);
-+        break;
-+      }
-+    return "";
-+  }
-+  [(set_attr "length" "4")]
-+)
-+
-+(define_insn "consttable_8"
-+  [(unspec_volatile [(match_operand 0 "" "")] VUNSPEC_POOL_8)]
-+  ""
-+  {
-+    making_const_table = TRUE;
-+    switch (GET_MODE_CLASS (GET_MODE (operands[0])))
-+      {
-+       case MODE_FLOAT:
-+        {
-+         REAL_VALUE_TYPE r; 
-+         char real_string[1024];
-+         REAL_VALUE_FROM_CONST_DOUBLE (r, operands[0]);
-+         real_to_decimal(real_string, &r, 1024, 0, 1);
-+         asm_fprintf (asm_out_file, "\t.double\t%s\n", real_string);
-+         break;
-+        }
-+       default:
-+         assemble_integer(operands[0], 8, 0, 1);
-+        break;
-+     }
-+    return "";
-+  }
-+  [(set_attr "length" "8")]
-+)
-+
-+;;=============================================================================
-+;; coprocessor instructions
-+;;-----------------------------------------------------------------------------
-+(define_insn "cop"
-+  [ (unspec_volatile [(match_operand 0 "immediate_operand" "Ku03")
-+                      (match_operand 1 "immediate_operand" "Ku04")
-+                      (match_operand 2 "immediate_operand" "Ku04")
-+                      (match_operand 3 "immediate_operand" "Ku04")
-+                      (match_operand 4 "immediate_operand" "Ku07")] VUNSPEC_COP)]
-+  ""
-+  "cop\tcp%0, cr%1, cr%2, cr%3, %4"
-+  [(set_attr "length" "4")]
-+  )
-+
-+(define_insn "mvcrsi"
-+  [ (set (match_operand:SI 0 "avr32_cop_move_operand" "=r,<,Z")
-+         (unspec_volatile:SI [(match_operand 1 "immediate_operand" "Ku03,Ku03,Ku03")
-+                              (match_operand 2 "immediate_operand" "Ku04,Ku04,Ku04")]
-+                             VUNSPEC_MVCR)) ]
-+  ""
-+  "@
-+   mvcr.w\tcp%1, %0, cr%2
-+   stcm.w\tcp%1, %0, cr%2
-+   stc.w\tcp%1, %0, cr%2"
-+  [(set_attr "length" "4")]
-+  )
-+
-+(define_insn "mvcrdi"
-+  [ (set (match_operand:DI 0 "avr32_cop_move_operand" "=r,<,Z")
-+         (unspec_volatile:DI [(match_operand 1 "immediate_operand" "Ku03,Ku03,Ku03")
-+                              (match_operand 2 "immediate_operand" "Ku04,Ku04,Ku04")]
-+                             VUNSPEC_MVCR)) ]
-+  ""
-+  "@
-+   mvcr.d\tcp%1, %0, cr%2
-+   stcm.d\tcp%1, %0, cr%2-cr%i2
-+   stc.d\tcp%1, %0, cr%2"
-+  [(set_attr "length" "4")]
-+  )
-+
-+(define_insn "mvrcsi"
-+  [ (unspec_volatile:SI [(match_operand 0 "immediate_operand" "Ku03,Ku03,Ku03")
-+                         (match_operand 1 "immediate_operand" "Ku04,Ku04,Ku04")
-+                         (match_operand:SI 2 "avr32_cop_move_operand" "r,>,Z")]
-+                        VUNSPEC_MVRC)]
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+      return "mvrc.w\tcp%0, cr%1, %2";
-+    case 1:
-+      return "ldcm.w\tcp%0, %2, cr%1";
-+    case 2:
-+      return "ldc.w\tcp%0, cr%1, %2";
-+    default:
-+      abort();
-+   }
-+  }
-+  [(set_attr "length" "4")]
-+  )
-+
-+(define_insn "mvrcdi"
-+  [ (unspec_volatile:DI [(match_operand 0 "immediate_operand" "Ku03,Ku03,Ku03")
-+                         (match_operand 1 "immediate_operand" "Ku04,Ku04,Ku04")
-+                         (match_operand:DI 2 "avr32_cop_move_operand" "r,>,Z")]
-+                        VUNSPEC_MVRC)]
-+  ""
-+  {
-+   switch (which_alternative){
-+    case 0:
-+      return "mvrc.d\tcp%0, cr%1, %2";
-+    case 1:
-+      return "ldcm.d\tcp%0, %2, cr%1-cr%i1";
-+    case 2:
-+      return "ldc.d\tcp%0, cr%1, %2";
-+    default:
-+      abort();
-+   }
-+  }
-+  [(set_attr "length" "4")]
-+  )
-+
-+;;=============================================================================
-+;; epilogue
-+;;-----------------------------------------------------------------------------
-+;; This pattern emits RTL for exit from a function. The function exit is
-+;; responsible for deallocating the stack frame, restoring callee saved
-+;; registers and emitting the return instruction.
-+;; ToDo: using TARGET_ASM_FUNCTION_PROLOGUE instead.
-+;;=============================================================================
-+(define_expand "epilogue"
-+  [(unspec_volatile [(return)] VUNSPEC_EPILOGUE)]
-+  ""
-+  "
-+  if (USE_RETURN_INSN (FALSE)){
-+      emit_jump_insn (gen_return ());
-+      DONE;
-+  }
-+  emit_jump_insn (gen_rtx_UNSPEC_VOLATILE (VOIDmode,
-+	gen_rtvec (1,
-+		gen_rtx_RETURN (VOIDmode)),
-+	VUNSPEC_EPILOGUE));
-+  DONE;
-+  "
-+  )
-+
-+(define_insn "*epilogue_insns"
-+  [(unspec_volatile [(return)] VUNSPEC_EPILOGUE)]
-+  ""
-+  {
-+    avr32_output_return_instruction (FALSE, FALSE, NULL, NULL);
-+    return "";
-+  }
-+  ; Length is absolute worst case
-+  [(set_attr "type" "branch")
-+   (set_attr "length" "12")]
-+  )
-+
-+(define_insn "*epilogue_insns_ret_imm"
-+  [(parallel [(set (reg RETVAL_REGNUM) (match_operand 0 "immediate_operand" "i"))
-+              (use (reg RETVAL_REGNUM))
-+              (unspec_volatile [(return)] VUNSPEC_EPILOGUE)])]
-+  "((INTVAL(operands[0]) == -1) || (INTVAL(operands[0]) == 0) || (INTVAL(operands[0]) == 1))"
-+  {
-+    avr32_output_return_instruction (FALSE, FALSE, NULL, operands[0]);
-+    return "";
-+  }
-+  ; Length is absolute worst case
-+  [(set_attr "type" "branch")
-+   (set_attr "length" "12")]
-+  )
-+
-+(define_insn "sibcall_epilogue"
-+  [(unspec_volatile [(const_int 0)] VUNSPEC_EPILOGUE)]
-+  ""
-+  {
-+   avr32_output_return_instruction (FALSE, FALSE,  NULL, NULL);
-+   return "";
-+  }
-+;; Length is absolute worst case
-+  [(set_attr "type" "branch")
-+   (set_attr "length" "12")]
-+  )
-+
-+(define_insn "*sibcall_epilogue_insns_ret_imm"
-+  [(parallel [(set (reg RETVAL_REGNUM) (match_operand 0 "immediate_operand" "i"))
-+              (use (reg RETVAL_REGNUM))
-+              (unspec_volatile [(const_int 0)] VUNSPEC_EPILOGUE)])]
-+  "((INTVAL(operands[0]) == -1) || (INTVAL(operands[0]) == 0) || (INTVAL(operands[0]) == 1))"
-+  {
-+    avr32_output_return_instruction (FALSE, FALSE, NULL, operands[0]);
-+    return "";
-+  }
-+  ; Length is absolute worst case
-+  [(set_attr "type" "branch")
-+   (set_attr "length" "12")]
-+  )
-+
-+(define_insn "ldxi"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(mem:SI (plus:SI
-+                 (match_operand:SI 1 "register_operand" "r")
-+                 (mult:SI (zero_extract:SI (match_operand:SI 2 "register_operand" "r")
-+                                           (const_int 8)
-+                                           (match_operand:SI 3 "immediate_operand" "Ku05"))
-+                          (const_int 4)))))]
-+  "(INTVAL(operands[3]) == 24 || INTVAL(operands[3]) == 16 || INTVAL(operands[3]) == 8
-+   || INTVAL(operands[3]) == 0)"
-+  {
-+   switch ( INTVAL(operands[3]) ){
-+    case 0:
-+         return "ld.w    %0, %1[%2:b << 2]";
-+    case 8:
-+         return "ld.w    %0, %1[%2:l << 2]";
-+    case 16:
-+         return "ld.w    %0, %1[%2:u << 2]";
-+    case 24:
-+         return "ld.w    %0, %1[%2:t << 2]";
-+    default:
-+         internal_error("illegal operand for ldxi");
-+   }
-+  }
-+  [(set_attr "type" "load")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
-+
-+
-+
-+
-+
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;;   sub     r8, r7, 8
-+;;   st.w    r8[0x0], r12
-+;; to
-+;;   sub     r8, r7, 8
-+;;   st.w    r7[-0x8], r12
-+;;=============================================================================
-+; (set (reg:SI 9 r8)
-+;      (plus:SI (reg/f:SI 6 r7)
-+;               (const_int ...)))
-+; (set (mem:SI (reg:SI 9 r8))
-+;      (reg:SI 12 r12))
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+	(plus:SI (match_operand:SI 1 "register_operand" "")
-+		 (match_operand:SI 2 "immediate_operand" "")))
-+   (set (mem:SI (match_dup 0))
-+	(match_operand:SI 3 "register_operand" ""))]
-+  "REGNO(operands[0]) != REGNO(operands[1]) && avr32_const_ok_for_constraint_p(INTVAL(operands[2]), 'K', \"Ks16\")"
-+  [(set (match_dup 0)
-+	(plus:SI (match_dup 1)
-+		 (match_dup 2)))
-+   (set (mem:SI (plus:SI (match_dup 1)
-+			 (match_dup 2)))
-+	(match_dup 3))]
-+  "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;;   sub     r6, r7, 4
-+;;   ld.w    r6, r6[0x0]
-+;; to
-+;;   sub     r6, r7, 4
-+;;   ld.w    r6, r7[-0x4]
-+;;=============================================================================
-+; (set (reg:SI 7 r6)
-+;      (plus:SI (reg/f:SI 6 r7)
-+;               (const_int -4 [0xfffffffc])))
-+; (set (reg:SI 7 r6)
-+;      (mem:SI (reg:SI 7 r6)))
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+	(plus:SI (match_operand:SI 1 "register_operand" "")
-+		 (match_operand:SI 2 "immediate_operand" "")))
-+   (set (match_operand:SI 3 "register_operand" "")
-+	(mem:SI (match_dup 0)))]
-+  "REGNO(operands[0]) != REGNO(operands[1]) && avr32_const_ok_for_constraint_p(INTVAL(operands[2]), 'K', \"Ks16\")"
-+  [(set (match_dup 0)
-+	(plus:SI (match_dup 1)
-+		 (match_dup 2)))
-+   (set (match_dup 3)
-+	(mem:SI (plus:SI (match_dup 1)
-+			 (match_dup 2))))]
-+  "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;;   ld.sb   r0, r7[-0x6]
-+;;   cashs.b r0
-+;; to
-+;;   ld.sb   r0, r7[-0x6]
-+;;=============================================================================
-+(define_peephole2
-+  [(set (match_operand:QI 0 "register_operand" "")
-+	(match_operand:QI 1 "load_sb_memory_operand" ""))
-+   (set (match_operand:SI 2 "register_operand" "")
-+	(sign_extend:SI (match_dup 0)))]
-+  "(REGNO(operands[0]) == REGNO(operands[2]) || peep2_reg_dead_p(2, operands[0]))"
-+  [(set (match_dup 2)
-+	(sign_extend:SI (match_dup 1)))]
-+  "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;;   ld.ub   r0, r7[-0x6]
-+;;   cashu.b r0
-+;; to
-+;;   ld.ub   r0, r7[-0x6]
-+;;=============================================================================
-+(define_peephole2
-+  [(set (match_operand:QI 0 "register_operand" "")
-+	(match_operand:QI 1 "memory_operand" ""))
-+   (set (match_operand:SI 2 "register_operand" "")
-+	(zero_extend:SI (match_dup 0)))]
-+  "(REGNO(operands[0]) == REGNO(operands[2])) || peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 2)
-+	(zero_extend:SI (match_dup 1)))]
-+  "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;;   ld.sh   r0, r7[-0x6]
-+;;   casts.h r0
-+;; to
-+;;   ld.sh   r0, r7[-0x6]
-+;;=============================================================================
-+(define_peephole2
-+  [(set (match_operand:HI 0 "register_operand" "")
-+	(match_operand:HI 1 "memory_operand" ""))
-+   (set (match_operand:SI 2 "register_operand" "")
-+	(sign_extend:SI (match_dup 0)))]
-+  "(REGNO(operands[0]) == REGNO(operands[2])) || peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 2)
-+	(sign_extend:SI (match_dup 1)))]
-+  "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;;   ld.uh   r0, r7[-0x6]
-+;;   castu.h r0
-+;; to
-+;;   ld.uh   r0, r7[-0x6]
-+;;=============================================================================
-+(define_peephole2
-+  [(set (match_operand:HI 0 "register_operand" "")
-+	(match_operand:HI 1 "memory_operand" ""))
-+   (set (match_operand:SI 2 "register_operand" "")
-+	(zero_extend:SI (match_dup 0)))]
-+  "(REGNO(operands[0]) == REGNO(operands[2])) || peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 2)
-+	(zero_extend:SI (match_dup 1)))]
-+  "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;;   mul     rd, rx, ry
-+;;   add     rd2, rd
-+;; to
-+;;   mac     rd2, rx, ry
-+;;=============================================================================
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (mult:SI (match_operand:SI 1 "register_operand" "")
-+                (match_operand:SI 2 "register_operand" "")))
-+   (set (match_operand:SI 3 "register_operand" "")
-+        (plus:SI (match_dup 3)
-+                 (match_dup 0)))]
-+  "peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 3)
-+	(plus:SI (mult:SI (match_dup 1)
-+			  (match_dup 2))
-+		 (match_dup 3)))]
-+  "")
-+
-+
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Changing
-+;;   bfextu  rd, rs, k5, 1 or and(h/l) rd, one_bit_set_mask
-+;; to
-+;;   bld     rs, k5
-+;;
-+;; If rd is dead after the operation.
-+;;=============================================================================
-+(define_peephole2
-+  [ (set (match_operand:SI 0 "register_operand" "")
-+         (zero_extract:SI (match_operand:SI 1 "register_operand" "")
-+                          (const_int 1)
-+                          (match_operand:SI 2 "immediate_operand" "")))
-+    (set (cc0)
-+         (match_dup 0))]
-+  "peep2_reg_dead_p(2, operands[0])"
-+  [(set (cc0)
-+        (and:SI (match_dup 1)
-+                (match_dup 2)))]
-+  "operands[2] = GEN_INT(1 << INTVAL(operands[2]));")
-+
-+(define_peephole2
-+  [ (set (match_operand:SI 0 "register_operand" "")
-+         (and:SI (match_operand:SI 1 "register_operand" "")
-+                 (match_operand:SI 2 "one_bit_set_operand" "")))
-+    (set (cc0)
-+         (match_dup 0))]
-+  "peep2_reg_dead_p(2, operands[0])"
-+  [(set (cc0)
-+        (and:SI (match_dup 1)
-+                (match_dup 2)))]
-+  "")
-+
-+;;=============================================================================
-+;; Peephole optimizing
-+;;-----------------------------------------------------------------------------
-+;; Load with extracted index: ld.w  Rd, Rb[Ri:{t/u/b/l} << 2]
-+;;
-+;;=============================================================================
-+
-+
-+(define_peephole
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (zero_extract:SI (match_operand:SI 1 "register_operand" "")
-+                         (const_int 8)
-+                         (match_operand:SI 2 "avr32_extract_shift_operand" "")))
-+   (set (match_operand:SI 3 "register_operand" "")
-+        (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+                         (match_operand:SI 4 "register_operand" ""))))]
-+
-+  "(dead_or_set_p(insn, operands[0]))"
-+  {
-+   switch ( INTVAL(operands[2]) ){
-+    case 0:
-+         return "ld.w    %3, %4[%1:b << 2]";
-+    case 8:
-+         return "ld.w    %3, %4[%1:l << 2]";
-+    case 16:
-+         return "ld.w    %3, %4[%1:u << 2]";
-+    case 24:
-+         return "ld.w    %3, %4[%1:t << 2]";
-+    default:
-+         internal_error("illegal operand for ldxi");
-+   }
-+  }
-+  [(set_attr "type" "load")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "clobber")]
-+  )
-+
-+
-+
-+(define_peephole
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (and:SI (match_operand:SI 1 "register_operand" "") (const_int 255)))
-+   (set (match_operand:SI 2 "register_operand" "")
-+        (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+                         (match_operand:SI 3 "register_operand" ""))))]
-+
-+  "(dead_or_set_p(insn, operands[0]))"
-+
-+  "ld.w    %2, %3[%1:b << 2]"
-+  [(set_attr "type" "load")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "clobber")]
-+  )
-+
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (zero_extract:SI (match_operand:SI 1 "register_operand" "")
-+                         (const_int 8)
-+                         (match_operand:SI 2 "avr32_extract_shift_operand" "")))
-+   (set (match_operand:SI 3 "register_operand" "")
-+        (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+                         (match_operand:SI 4 "register_operand" ""))))]
-+
-+  "(peep2_reg_dead_p(2, operands[0]))
-+   || (REGNO(operands[0]) == REGNO(operands[3]))"
-+  [(set (match_dup 3)
-+	(mem:SI (plus:SI
-+                 (match_dup 4)
-+                 (mult:SI (zero_extract:SI (match_dup 1)
-+                                           (const_int 8)
-+                                           (match_dup 2))
-+                          (const_int 4)))))]
-+  )
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (zero_extend:SI (match_operand:QI 1 "register_operand" "")))
-+   (set (match_operand:SI 2 "register_operand" "")
-+        (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+                         (match_operand:SI 3 "register_operand" ""))))]
-+
-+  "(peep2_reg_dead_p(2, operands[0]))
-+   || (REGNO(operands[0]) == REGNO(operands[2]))"
-+  [(set (match_dup 2)
-+	(mem:SI (plus:SI
-+                 (match_dup 3)
-+                 (mult:SI (zero_extract:SI (match_dup 1)
-+                                           (const_int 8)
-+                                           (const_int 0))
-+                          (const_int 4)))))]
-+  "operands[1] = gen_rtx_REG(SImode, REGNO(operands[1]));"
-+  )
-+
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (and:SI (match_operand:SI 1 "register_operand" "")
-+                (const_int 255)))
-+   (set (match_operand:SI 2 "register_operand" "")
-+        (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+                         (match_operand:SI 3 "register_operand" ""))))]
-+
-+  "(peep2_reg_dead_p(2, operands[0]))
-+   || (REGNO(operands[0]) == REGNO(operands[2]))"
-+  [(set (match_dup 2)
-+	(mem:SI (plus:SI
-+                 (match_dup 3)
-+                 (mult:SI (zero_extract:SI (match_dup 1)
-+                                           (const_int 8)
-+                                           (const_int 0))
-+                          (const_int 4)))))]
-+  ""
-+  )
-+
-+
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (lshiftrt:SI (match_operand:SI 1 "register_operand" "")
-+                     (const_int 24)))
-+   (set (match_operand:SI 2 "register_operand" "")
-+        (mem:SI (plus:SI (mult:SI (match_dup 0) (const_int 4))
-+                         (match_operand:SI 3 "register_operand" ""))))]
-+
-+  "(peep2_reg_dead_p(2, operands[0]))
-+   || (REGNO(operands[0]) == REGNO(operands[2]))"
-+  [(set (match_dup 2)
-+	(mem:SI (plus:SI
-+                 (match_dup 3)
-+                 (mult:SI (zero_extract:SI (match_dup 1)
-+                                           (const_int 8)
-+                                           (const_int 24))
-+                          (const_int 4)))))]
-+  ""
-+  )
-+
-+
-+;;************************************************
-+;; ANDN
-+;;
-+;;************************************************
-+
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (not:SI (match_operand:SI 1 "register_operand" "")))
-+   (set (match_operand:SI 2 "register_operand" "")
-+        (and:SI (match_dup 2)
-+                (match_dup 0)))]
-+  "peep2_reg_dead_p(2, operands[0])"
-+
-+  [(set (match_dup 2)
-+        (and:SI  (match_dup 2)
-+                 (not:SI (match_dup 1))
-+                 ))]
-+  ""
-+)
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+        (not:SI (match_operand:SI 1 "register_operand" "")))
-+   (set (match_operand:SI 2 "register_operand" "")
-+        (and:SI (match_dup 0)
-+                (match_dup 2)
-+                ))]
-+  "peep2_reg_dead_p(2, operands[0])"
-+
-+  [(set (match_dup 2)
-+        (and:SI  (match_dup 2)
-+                 (not:SI (match_dup 1))
-+                 ))]
-+
-+  ""
-+)
-+
-+
-+;;=================================================================
-+;; Addabs peephole
-+;;=================================================================
-+
-+(define_peephole
-+  [(set (match_operand:SI 2 "register_operand" "=r")
-+ 	(abs:SI (match_operand:SI 1 "register_operand" "r")))
-+   (set (match_operand:SI 0 "register_operand" "=r")
-+ 	(plus:SI (match_operand:SI 3 "register_operand" "r")
-+ 		 (match_dup 2)))]
-+  "dead_or_set_p(insn, operands[2])"
-+  "addabs  %0, %3, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "set_z")])
-+
-+(define_peephole
-+  [(set (match_operand:SI 2 "register_operand" "=r")
-+ 	(abs:SI (match_operand:SI 1 "register_operand" "r")))
-+   (set (match_operand:SI 0 "register_operand" "=r")
-+ 	(plus:SI (match_dup 2)
-+                 (match_operand:SI 3 "register_operand" "r")))]
-+  "dead_or_set_p(insn, operands[2])"
-+  "addabs  %0, %3, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "cc" "set_z")])
-+
-+
-+;;=================================================================
-+;; Detect roundings
-+;;=================================================================
-+
-+(define_insn "*round"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+        (ashiftrt:SI (plus:SI (match_operand:SI 1 "register_operand" "0")
-+                              (match_operand:SI 2 "immediate_operand" "i"))
-+                     (match_operand:SI 3 "immediate_operand" "i")))]
-+  "avr32_rnd_operands(operands[2], operands[3])"
-+
-+  "satrnds    %0 >> %3, 31"
-+
-+  [(set_attr "type" "alu_sat")
-+   (set_attr "length" "4")]
-+
-+  )
-+
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand" "")
-+	(plus:SI (match_dup 0)
-+                 (match_operand:SI 1 "immediate_operand" "")))
-+   (set (match_dup 0)
-+	(ashiftrt:SI (match_dup 0)
-+                     (match_operand:SI 2 "immediate_operand" "")))]
-+  "avr32_rnd_operands(operands[1], operands[2])"
-+
-+  [(set (match_dup 0)
-+        (ashiftrt:SI (plus:SI (match_dup 0)
-+                              (match_dup 1))
-+                     (match_dup 2)))]
-+  )
-+
-+(define_peephole
-+  [(set (match_operand:SI 0 "register_operand" "r")
-+	(plus:SI (match_dup 0)
-+                 (match_operand:SI 1 "immediate_operand" "i")))
-+   (set (match_dup 0)
-+	(ashiftrt:SI (match_dup 0)
-+                     (match_operand:SI 2 "immediate_operand" "i")))]
-+  "avr32_rnd_operands(operands[1], operands[2])"
-+
-+  "satrnds    %0 >> %2, 31"
-+
-+  [(set_attr "type" "alu_sat")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "clobber")]
-+
-+  )
-+
-+
-+
-+
-+;;=================================================================
-+;; Conditional Subtract
-+;;=================================================================
-+
-+
-+(define_peephole
-+  [(set (match_operand:SI 0 "register_operand" "")
-+	(minus:SI (match_operand:SI 1 "register_operand" "")
-+		  (match_operand:SI 2 "immediate_operand" "")))
-+   (set (match_dup 1)
-+	(unspec:SI [(match_operand 5 "avr32_comparison_operator" "")
-+		      (match_dup 0)
-+		      (match_dup 1)
-+                      (match_operand 3 "general_operand" "")
-+                      (match_operand 4 "general_operand" "")]
-+                      UNSPEC_MOVSICC))]
-+
-+  "(dead_or_set_p(insn, operands[0])) && avr32_const_ok_for_constraint_p(INTVAL(operands[2]), 'K', \"Ks08\")"
-+
-+  {
-+
-+   operands[5] = avr32_output_cmp(operands[5], GET_MODE(operands[3]), operands[3], operands[4]);
-+
-+   return "sub%5    %1, %2";
-+  }
-+
-+  [(set_attr "length" "10")
-+   (set_attr "cc" "clobber")]
-+  )
-+
-+(define_peephole
-+  [(set (match_operand:SI 0 "register_operand" "")
-+	(plus:SI (match_operand:SI 1 "register_operand" "")
-+		  (match_operand:SI 2 "immediate_operand" "")))
-+   (set (match_dup 1)
-+	(unspec:SI [(match_operand 5 "avr32_comparison_operator" "")
-+                    (match_dup 0)
-+                    (match_dup 1)
-+                    (match_operand 3 "general_operand" "")
-+                    (match_operand 4 "general_operand" "")]
-+                   UNSPEC_MOVSICC))]
-+
-+  "(dead_or_set_p(insn, operands[0]) && avr32_const_ok_for_constraint_p(INTVAL(operands[2]), 'I', \"Is08\"))"
-+
-+  {
-+   operands[5] = avr32_output_cmp(operands[5], GET_MODE(operands[3]), operands[3], operands[4]);
-+
-+   return "sub%5    %1, %n2";
-+  }
-+  [(set_attr "length" "10")
-+   (set_attr "cc" "clobber")]
-+  )
-+
-+;;=================================================================
-+;; mcall
-+;;=================================================================
-+(define_peephole
-+  [(set (match_operand:SI 0 "register_operand"        "")
-+	(match_operand 1 "avr32_const_pool_ref_operand"  ""))
-+   (parallel [(call (mem:SI (match_dup 0))
-+                    (match_operand 2 "" ""))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  "dead_or_set_p(insn, operands[0])"
-+  "mcall    %1"
-+  [(set_attr "type" "call")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "clobber")]
-+)
-+
-+(define_peephole
-+  [(set (match_operand:SI 2 "register_operand"        "")
-+	(match_operand 1 "avr32_const_pool_ref_operand"  ""))
-+   (parallel [(set (match_operand 0 "register_operand" "")
-+                   (call (mem:SI (match_dup 2))
-+                         (match_operand 3 "" "")))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  "dead_or_set_p(insn, operands[2])"
-+  "mcall    %1"
-+  [(set_attr "type" "call")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "call_set")]
-+)
-+
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand"    "")
-+	(match_operand 1 "avr32_const_pool_ref_operand"  ""))
-+   (parallel [(call (mem:SI (match_dup 0))
-+                    (match_operand 2 "" ""))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  "peep2_reg_dead_p(2, operands[0])"
-+  [(parallel [(call (mem:SI (match_dup 1))
-+                    (match_dup 2))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  ""
-+)
-+
-+(define_peephole2
-+  [(set (match_operand:SI 0 "register_operand"        "")
-+	(match_operand 1 "avr32_const_pool_ref_operand"  ""))
-+   (parallel [(set (match_operand 2 "register_operand" "")
-+                   (call (mem:SI (match_dup 0))
-+                         (match_operand 3 "" "")))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  "(peep2_reg_dead_p(2, operands[0]) || (REGNO(operands[2]) == REGNO(operands[0])))"
-+  [(parallel [(set (match_dup 2)
-+                   (call (mem:SI (match_dup 1))
-+                         (match_dup 3)))
-+              (clobber (reg:SI LR_REGNUM))])]
-+  ""
-+)
-+
-+;;=================================================================
-+;; Returning a value
-+;;=================================================================
-+
-+
-+(define_peephole
-+  [(set (match_operand 0 "register_operand" "")
-+        (match_operand 1 "register_operand" ""))
-+   (return)]
-+  "USE_RETURN_INSN (TRUE) && (REGNO(operands[0]) == RETVAL_REGNUM)
-+   && (REGNO(operands[1]) != LR_REGNUM)
-+   && (REGNO_REG_CLASS(REGNO(operands[1])) == GENERAL_REGS)"
-+  "retal    %1"
-+  [(set_attr "type" "call")
-+   (set_attr "length" "2")]
-+  )
-+
-+
-+(define_peephole
-+  [(set (match_operand 0 "register_operand" "r")
-+        (match_operand 1 "immediate_operand" "i"))
-+   (return)]
-+  "(USE_RETURN_INSN (FALSE) && (REGNO(operands[0]) == RETVAL_REGNUM) &&
-+   ((INTVAL(operands[1]) == -1) || (INTVAL(operands[1]) == 0) || (INTVAL(operands[1]) == 1)))"
-+  {
-+    avr32_output_return_instruction (TRUE, FALSE, NULL, operands[1]);
-+    return "";
-+  }
-+  [(set_attr "type" "call")
-+   (set_attr "length" "4")]
-+  )
-+
-+(define_peephole
-+  [(set (match_operand 0 "register_operand" "r")
-+        (match_operand 1 "immediate_operand" "i"))
-+   (unspec_volatile [(return)] VUNSPEC_EPILOGUE)]
-+  "(REGNO(operands[0]) == RETVAL_REGNUM) &&
-+   ((INTVAL(operands[1]) == -1) || (INTVAL(operands[1]) == 0) || (INTVAL(operands[1]) == 1))"
-+  {
-+    avr32_output_return_instruction (FALSE, FALSE, NULL, operands[1]);
-+    return "";
-+  }
-+  ; Length is absolute worst case
-+  [(set_attr "type" "branch")
-+   (set_attr "length" "12")]
-+  )
-+
-+(define_peephole
-+  [(set (match_operand 0 "register_operand" "r")
-+	(unspec [(match_operand 1 "avr32_comparison_operator" "")
-+                 (match_operand 2 "register_immediate_operand" "rKs08")
-+                 (match_operand 3 "register_immediate_operand" "rKs08")
-+                 (match_operand 4 "register_immediate_operand" "r")
-+                 (match_operand 5 "register_immediate_operand" "rKs21")
-+                 ]
-+                UNSPEC_MOVSICC ))
-+   (return)]
-+  "USE_RETURN_INSN (TRUE) && (REGNO(operands[0]) == RETVAL_REGNUM) &&
-+   ((GET_MODE(operands[4]) == SImode) ||
-+   ((GET_MODE(operands[4]) != SImode) && (GET_CODE(operands[5]) == REG)))"
-+  {
-+   operands[1] = avr32_output_cmp(operands[1], GET_MODE(operands[4]), operands[4], operands[5]);
-+
-+   if ( GET_CODE(operands[2]) == REG
-+        && GET_CODE(operands[3]) == REG
-+        && REGNO(operands[2]) != LR_REGNUM
-+        && REGNO(operands[3]) != LR_REGNUM ){
-+      return "ret%1    %2\;ret%i1    %3";
-+   } else if ( GET_CODE(operands[2]) == REG
-+               && GET_CODE(operands[3]) == CONST_INT ){
-+      if ( INTVAL(operands[3]) == -1
-+           || INTVAL(operands[3]) == 0
-+           || INTVAL(operands[3]) == 1 ){
-+        return "ret%1    %2\;ret%i1    %d3";
-+      } else {
-+        return "mov%1    r12, %2\;mov%i1    r12, %3\;retal    r12";
-+      }
-+   } else if ( GET_CODE(operands[2]) == CONST_INT
-+               && GET_CODE(operands[3]) == REG ){
-+      if ( INTVAL(operands[2]) == -1
-+           || INTVAL(operands[2]) == 0
-+           || INTVAL(operands[2]) == 1 ){
-+        return "ret%1    %d2\;ret%i1    %3";
-+      } else {
-+        return "mov%1    r12, %2\;mov%i1    r12, %3\;retal    r12";
-+      }
-+   } else {
-+      if ( (INTVAL(operands[2]) == -1
-+            || INTVAL(operands[2]) == 0
-+            || INTVAL(operands[2]) == 1 )
-+           && (INTVAL(operands[3]) == -1
-+               || INTVAL(operands[3]) == 0
-+               || INTVAL(operands[3]) == 1 )){
-+        return "ret%1    %d2\;ret%i1    %d3";
-+      } else {
-+        return "mov%1    r12, %2\;mov%i1    r12, %3\;retal    r12";
-+      }
-+   }
-+  }
-+
-+  [(set_attr "length" "14")
-+   (set_attr "cc" "clobber")
-+   (set_attr "type" "call")])
-+
-+
-+;;=================================================================
-+;; mulnhh.w
-+;;=================================================================
-+
-+(define_peephole2
-+  [(set (match_operand:HI 0 "register_operand" "")
-+        (neg:HI (match_operand:HI 1 "register_operand" "")))
-+   (set (match_operand:SI 2 "register_operand" "")
-+        (mult:SI
-+         (sign_extend:SI (match_dup 0))
-+         (sign_extend:SI (match_operand:HI 3 "register_operand" ""))))]
-+  "(peep2_reg_dead_p(2, operands[0])) || (REGNO(operands[2]) == REGNO(operands[0]))"
-+  [ (set (match_dup 2)
-+         (mult:SI
-+          (sign_extend:SI (neg:HI (match_dup 1)))
-+          (sign_extend:SI (match_dup 3))))]
-+  ""
-+  )
-+
-+(define_peephole2
-+  [(set (match_operand:HI 0 "register_operand" "")
-+        (neg:HI (match_operand:HI 1 "register_operand" "")))
-+   (set (match_operand:SI 2 "register_operand" "")
-+        (mult:SI
-+         (sign_extend:SI (match_operand:HI 3 "register_operand" ""))
-+         (sign_extend:SI (match_dup 0))))]
-+  "(peep2_reg_dead_p(2, operands[0])) || (REGNO(operands[2]) == REGNO(operands[0]))"
-+  [ (set (match_dup 2)
-+         (mult:SI
-+          (sign_extend:SI (neg:HI (match_dup 1)))
-+          (sign_extend:SI (match_dup 3))))]
-+  ""
-+  )
-+
-+
-+
-+;;=================================================================
-+;; sthh.w
-+;;=================================================================
-+(define_insn "vec_setv2hi"
-+  [(set (match_operand:V2HI 0 "register_operand" "=r")
-+        (vec_merge:V2HI
-+         (match_dup 0)
-+         (vec_duplicate:V2HI
-+          (match_operand:HI 1 "register_operand" "r"))
-+         (const_int 1)))]
-+  ""
-+  "bfins\t%0, %1, 16, 16"
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "clobber")])
-+
-+(define_insn "vec_setv2lo"
-+  [(set (match_operand:V2HI 0 "register_operand" "+r")
-+        (vec_merge:V2HI
-+         (match_dup 0)
-+         (vec_duplicate:V2HI
-+          (match_operand:HI 1 "register_operand" "r"))
-+         (const_int 2)))]
-+  ""
-+  "bfins\t%0, %1, 0, 16"
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "clobber")])
-+
-+(define_expand "vec_setv2"
-+  [(set (match_operand:V2HI 0 "register_operand" "")
-+        (vec_merge:V2HI
-+         (match_dup 0)
-+         (vec_duplicate:V2HI
-+          (match_operand:HI 1 "register_operand" ""))
-+         (match_operand 2 "immediate_operand" "")))]
-+  ""
-+  { operands[2] = GEN_INT(INTVAL(operands[2]) + 1); }
-+  )
-+
-+(define_insn "vec_extractv2hi"
-+  [(set (match_operand:HI 0 "register_operand" "=r")
-+        (vec_select:HI
-+         (match_operand:V2HI 1 "register_operand" "r")
-+         (parallel [(match_operand:SI 2 "immediate_operand" "i")])))]
-+  ""
-+  {
-+   if ( INTVAL(operands[2]) == 0 )
-+      return "bfextu\t%0, %1, 16, 16";
-+   else
-+      return "bfextu\t%0, %1, 0, 16";
-+  }
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "clobber")])
-+
-+(define_insn "vec_extractv4qi"
-+  [(set (match_operand:QI 0 "register_operand" "=r")
-+        (vec_select:QI
-+         (match_operand:V4QI 1 "register_operand" "r")
-+         (parallel [(match_operand:SI 2 "immediate_operand" "i")])))]
-+  ""
-+  {
-+   switch ( INTVAL(operands[2]) ){
-+     case 0:
-+       return "bfextu\t%0, %1, 24, 8";
-+     case 1:
-+       return "bfextu\t%0, %1, 16, 8";
-+     case 2:
-+       return "bfextu\t%0, %1, 8, 8";
-+     case 3:
-+       return "bfextu\t%0, %1, 0, 8";
-+     default:
-+       abort();
-+   }
-+  }
-+  [(set_attr "type" "alu")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "clobber")])
-+
-+
-+(define_insn "concatv2hi"
-+  [(set (match_operand:V2HI 0 "register_operand" "=r, r, r")
-+        (vec_concat:V2HI
-+         (match_operand:HI 1 "register_operand" "r, r, 0")
-+         (match_operand:HI 2 "register_operand" "r, 0, r")))]
-+  ""
-+  "@
-+   mov\t%0, %1\;bfins\t%0, %2, 0, 16
-+   bfins\t%0, %2, 0, 16
-+   bfins\t%0, %1, 16, 16"
-+  [(set_attr "length" "6, 4, 4")
-+   (set_attr "type" "alu")])
-+
-+;(define_peephole2
-+;  [(set (match_operand:HI 0 "register_operand" "r")
-+;        (plus:HI (match_operand:HI 3 "register_operand" "r")
-+;                 (match_operand:HI 4 "register_operand" "r")))
-+;   (set (match_operand:HI 1 "register_operand" "r")
-+;        (minus:HI (match_dup 3)
-+;                  (match_dup 4)))]
-+;  "REGNO(operands[0]) != REGNO(operands[3])"
-+;  [(set (match_dup 2)
-+;        (vec_concat:V2HI
-+;         (minus:HI (match_dup 3)
-+;                  (match_dup 4))
-+;         (plus:HI (match_dup 3) (match_dup 4))))
-+;   (set (match_dup 1) (vec_select:HI (match_dup 2)
-+;                                     (parallel [(const_int 0)])))]
-+;
-+;  "operands[2] = gen_rtx_REG(V2HImode, REGNO(operands[0]));"
-+;  )
-+;
-+;(define_peephole2
-+;  [(set (match_operand:HI 0 "register_operand" "r")
-+;        (minus:HI (match_operand:HI 3 "register_operand" "r")
-+;                 (match_operand:HI 4 "register_operand" "r")))
-+;   (set (match_operand:HI 1 "register_operand" "r")
-+;        (plus:HI (match_dup 3)
-+;                  (match_dup 4)))]
-+;  "REGNO(operands[0]) != REGNO(operands[3])"
-+;  [(set (match_dup 2)
-+;        (vec_concat:V2HI
-+;         (plus:HI (match_dup 3)
-+;                  (match_dup 4))
-+;         (minus:HI (match_dup 3) (match_dup 4))))
-+;   (set (match_dup 1) (vec_select:HI (match_dup 2)
-+;                                     (parallel [(const_int 0)])))]
-+;
-+;  "operands[2] = gen_rtx_REG(V2HImode, REGNO(operands[0]));"
-+;  )
-+
-+
-+;(define_peephole2
-+;  [(match_scratch:V2HI 5 "r")
-+;   (set (mem:HI (plus:SI (match_operand:SI 0 "register_operand" "")
-+;                         (match_operand:HI 1 "immediate_operand" "")))
-+;        (match_operand:HI 2 "register_operand"  "r"))
-+;   (set (mem:HI (plus:SI (match_dup 0)
-+;                         (match_operand:HI 3 "immediate_operand" "")))
-+;        (match_operand:HI 4 "register_operand"  "r"))]
-+;  "(GET_CODE(operands[1]) == CONST_INT) && (GET_CODE(operands[3]) == CONST_INT)
-+;   && (INTVAL(operands[3]) == (INTVAL(operands[1]) + 2))"
-+;
-+;  [(set (match_dup 5)
-+;        (vec_concat:V2HI
-+;         (match_dup 2)
-+;         (match_dup 4)))
-+;   (set (mem:V2HI (plus:SI (match_dup 0) (match_dup 1)))
-+;        (match_dup 5))]
-+;  ""
-+;  )
-+;
-+
-+;(define_insn "sthh_w"
-+;  [(set (match_operand:V2HI 0 "avr32_sthh_w_memory_operand" "m")
-+;        (vec_concat:V2HI
-+;         (vec_select:HI (match_operand:V2HI 1 "register_operand" "r")
-+;                        (parallel [(match_operand 3 "immediate_operand" "i")]))
-+;         (vec_select:HI (match_operand:V2HI 2 "register_operand" "r")
-+;                        (parallel [(match_operand 4 "immediate_operand" "i")]))))]
-+;  "MEM_ALIGN(operands[0]) >= 32"
-+;  "sthh.w\t%0, %1:%h3, %2:%h4"
-+;  [(set_attr "length" "4")
-+;   (set_attr "type" "store")])
-+;
-+;(define_peephole2
-+;  [(set (mem:HI (plus:SI (match_operand:SI 0 "register_operand" "")
-+;                         (match_operand:HI 1 "immediate_operand" "")))
-+;        (match_operand:HI 2 "register_operand"  "r"))
-+;   (set (mem:HI (plus:SI (match_dup 0)
-+;                         (match_operand:HI 3 "avr32_sthh_operand" "")))
-+;        (match_operand:HI 4 "register_operand"  "r"))]
-+;  "(GET_CODE(operands[1]) == CONST_INT) && (GET_CODE(operands[3]) == CONST_INT)
-+;   && (INTVAL(operands[3]) == (INTVAL(operands[1]) - 2))"
-+;
-+;  [(paralell [(set (mem:HI (plus:SI (match_dup 0)
-+;                                    (match_dup 3)))
-+;                   (match_dup 4))
-+;              (set (mem:HI (plus:SI (match_dup 0)
-+;                                    (plus:SI (match_dup 3) (const_int 2))))
-+;                   (match_dup 2))])]
-+;  ""
-+;  )
-+
-+
-+;; Load the SIMD description
-+(include "simd.md")
-+
-+;; Load the FP coprocessor patterns
-+(include "fpcp.md")
---- /dev/null
-+++ b/gcc/config/avr32/avr32-modes.def
-@@ -0,0 +1 @@
-+VECTOR_MODES (INT, 4);        /*            V4QI V2HI */
---- /dev/null
-+++ b/gcc/config/avr32/avr32.opt
-@@ -0,0 +1,78 @@
-+; Options for the ATMEL AVR32 port of the compiler.
-+
-+; Copyright 2007 Atmel Corporation.
-+;
-+; This file is part of GCC.
-+;
-+; GCC is free software; you can redistribute it and/or modify it under
-+; the terms of the GNU General Public License as published by the Free
-+; Software Foundation; either version 2, or (at your option) any later
-+; version.
-+;
-+; GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-+; WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-+; for more details.
-+;
-+; You should have received a copy of the GNU General Public License
-+; along with GCC; see the file COPYING.  If not, write to the Free
-+; Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-+; 02110-1301, USA.
-+
-+muse-rodata-section
-+Target Report Mask(USE_RODATA_SECTION)
-+Do not put readonly-data in .text section, but in .rodata.
-+
-+mhard-float
-+Target Report Mask(HARD_FLOAT)
-+Use floating point coprocessor instructions.
-+
-+msoft-float
-+Target Report InverseMask(HARD_FLOAT, SOFT_FLOAT)
-+Use software floating-point library for floating-point operations.
-+
-+force-double-align
-+Target Report RejectNegative Mask(FORCE_DOUBLE_ALIGN)
-+Force double-word alignment for double-word memory accesses.
-+
-+mno-init-got
-+Target Report RejectNegative Mask(NO_INIT_GOT)
-+Do not initialize GOT register before using it when compiling PIC code.
-+
-+mrelax
-+Target Report Mask(RELAX)
-+Let invoked assembler and linker do relaxing (Enabled by default when optimization level is >1).
-+
-+mno-reorg-opt
-+Target Report RejectNegative Mask(NO_REORG_OPT)
-+Do not perform machine dependent optimizations in reorg stage.
-+
-+mmd-reorg-opt
-+Target Report RejectNegative InverseMask(NO_REORG_OPT,MD_REORG_OPTIMIZATION)
-+Perform machine dependent optimizations in reorg stage.
-+
-+masm-addr-pseudos
-+Target Report RejectNegative InverseMask(NO_ASM_ADDR_PSEUDOS, HAS_ASM_ADDR_PSEUDOS)
-+Use assembler pseudo-instructions lda.w and call for handling direct addresses. (Enabled by default)
-+
-+mno-asm-addr-pseudos
-+Target Report RejectNegative Mask(NO_ASM_ADDR_PSEUDOS)
-+Do not use assembler pseudo-instructions lda.w and call for handling direct addresses.
-+
-+mno-pic
-+Target Report RejectNegative Mask(NO_PIC)
-+Do not emit position-independent code (will break dynamic linking.)
-+
-+mpart=
-+Target Report RejectNegative Joined Var(avr32_part_name)
-+Specify the AVR32 part name
-+
-+mcpu=
-+Target Report RejectNegative Joined Undocumented Var(avr32_part_name)
-+Specify the AVR32 part name (deprecated)
-+
-+march=
-+Target Report RejectNegative Joined Var(avr32_arch_name)
-+Specify the AVR32 architecture name
-+
-+
---- /dev/null
-+++ b/gcc/config/avr32/avr32-protos.h
-@@ -0,0 +1,175 @@
-+/*
-+   Prototypes for exported functions defined in avr32.c
-+   Copyright 2003-2006 Atmel Corporation.
-+
-+   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+   Initial porting by Anders Ådland.
-+
-+   This file is part of GCC.
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+
-+#ifndef AVR32_PROTOS_H
-+#define AVR32_PROTOS_H
-+
-+extern const int swap_reg[];
-+
-+extern int avr32_valid_macmac_bypass (rtx, rtx);
-+extern int avr32_valid_mulmac_bypass (rtx, rtx);
-+
-+extern int avr32_decode_lcomm_symbol_offset (rtx, int *);
-+extern void avr32_encode_lcomm_symbol_offset (tree, char *, int);
-+
-+extern const char *avr32_strip_name_encoding (const char *);
-+
-+extern rtx avr32_get_note_reg_equiv (rtx insn);
-+
-+extern int avr32_use_return_insn (int iscond);
-+
-+extern void avr32_make_reglist16 (int reglist16_vect, char *reglist16_string);
-+
-+extern void avr32_make_reglist8 (int reglist8_vect, char *reglist8_string);
-+extern void avr32_make_fp_reglist_w (int reglist_mask, char *reglist_string);
-+extern void avr32_make_fp_reglist_d (int reglist_mask, char *reglist_string);
-+
-+extern void avr32_output_return_instruction (int single_ret_inst,
-+					     int iscond, rtx cond,
-+					     rtx r12_imm);
-+extern void avr32_expand_prologue (void);
-+extern void avr32_set_return_address (rtx source);
-+
-+extern int avr32_hard_regno_mode_ok (int regno, enum machine_mode mode);
-+extern int avr32_extra_constraint_s (rtx value, const int strict);
-+extern int avr32_eh_return_data_regno (const int n);
-+extern int avr32_initial_elimination_offset (const int from, const int to);
-+extern rtx avr32_function_arg (CUMULATIVE_ARGS * cum, enum machine_mode mode,
-+			       tree type, int named);
-+extern void avr32_init_cumulative_args (CUMULATIVE_ARGS * cum, tree fntype,
-+					rtx libname, tree fndecl);
-+extern void avr32_function_arg_advance (CUMULATIVE_ARGS * cum,
-+					enum machine_mode mode,
-+					tree type, int named);
-+#ifdef ARGS_SIZE_RTX
-+/* expr.h defines ARGS_SIZE_RTX and `enum direction'.  */
-+extern enum direction avr32_function_arg_padding (enum machine_mode mode,
-+						  tree type);
-+#endif /* ARGS_SIZE_RTX */
-+extern rtx avr32_function_value (tree valtype, tree func);
-+extern rtx avr32_libcall_value (enum machine_mode mode);
-+extern int avr32_sched_use_dfa_pipeline_interface (void);
-+extern bool avr32_return_in_memory (tree type, tree fntype);
-+extern void avr32_regs_to_save (char *operand);
-+extern void avr32_target_asm_function_prologue (FILE * file,
-+						HOST_WIDE_INT size);
-+extern void avr32_target_asm_function_epilogue (FILE * file,
-+						HOST_WIDE_INT size);
-+extern void avr32_trampoline_template (FILE * file);
-+extern void avr32_initialize_trampoline (rtx addr, rtx fnaddr,
-+					 rtx static_chain);
-+extern int avr32_legitimate_address (enum machine_mode mode, rtx x,
-+				     int strict);
-+extern int avr32_legitimate_constant_p (rtx x);
-+
-+extern int avr32_legitimate_pic_operand_p (rtx x);
-+
-+extern rtx avr32_find_symbol (rtx x);
-+extern void avr32_select_section (rtx exp, int reloc, int align);
-+extern void avr32_encode_section_info (tree decl, rtx rtl, int first);
-+extern void avr32_asm_file_end (FILE * stream);
-+extern void avr32_asm_output_ascii (FILE * stream, char *ptr, int len);
-+extern void avr32_asm_output_common (FILE * stream, const char *name,
-+				     int size, int rounded);
-+extern void avr32_asm_output_label (FILE * stream, const char *name);
-+extern void avr32_asm_declare_object_name (FILE * stream, char *name,
-+					   tree decl);
-+extern void avr32_asm_globalize_label (FILE * stream, const char *name);
-+extern void avr32_asm_weaken_label (FILE * stream, const char *name);
-+extern void avr32_asm_output_external (FILE * stream, tree decl,
-+				       const char *name);
-+extern void avr32_asm_output_external_libcall (FILE * stream, rtx symref);
-+extern void avr32_asm_output_labelref (FILE * stream, const char *name);
-+extern void avr32_notice_update_cc (rtx exp, rtx insn);
-+extern void avr32_print_operand (FILE * stream, rtx x, int code);
-+extern void avr32_print_operand_address (FILE * stream, rtx x);
-+
-+extern int avr32_symbol (rtx x);
-+
-+extern void avr32_select_rtx_section (enum machine_mode mode, rtx x,
-+				      unsigned HOST_WIDE_INT align);
-+
-+extern int avr32_load_multiple_operation (rtx op, enum machine_mode mode);
-+extern int avr32_store_multiple_operation (rtx op, enum machine_mode mode);
-+
-+extern int avr32_const_ok_for_constraint_p (HOST_WIDE_INT value, char c,
-+					    const char *str);
-+
-+extern bool avr32_cannot_force_const_mem (rtx x);
-+
-+extern void avr32_init_builtins (void);
-+
-+extern rtx avr32_expand_builtin (tree exp, rtx target, rtx subtarget,
-+				 enum machine_mode mode, int ignore);
-+
-+extern bool avr32_must_pass_in_stack (enum machine_mode mode, tree type);
-+
-+extern bool avr32_strict_argument_naming (CUMULATIVE_ARGS * ca);
-+
-+extern bool avr32_pass_by_reference (CUMULATIVE_ARGS * cum,
-+				     enum machine_mode mode,
-+				     tree type, bool named);
-+
-+extern rtx avr32_gen_load_multiple (rtx * regs, int count, rtx from,
-+				    int write_back, int in_struct_p,
-+				    int scalar_p);
-+extern rtx avr32_gen_store_multiple (rtx * regs, int count, rtx to,
-+				     int in_struct_p, int scalar_p);
-+extern int avr32_gen_movmemsi (rtx * operands);
-+
-+extern int avr32_rnd_operands (rtx add, rtx shift);
-+extern int avr32_adjust_insn_length (rtx insn, int length);
-+
-+extern int symbol_mentioned_p (rtx x);
-+extern int label_mentioned_p (rtx x);
-+extern rtx legitimize_pic_address (rtx orig, enum machine_mode mode, rtx reg);
-+extern int avr32_address_register_rtx_p (rtx x, int strict_p);
-+extern int avr32_legitimate_index_p (enum machine_mode mode, rtx index,
-+				     int strict_p);
-+
-+extern int avr32_const_double_immediate (rtx value);
-+extern void avr32_init_expanders (void);
-+extern rtx avr32_return_addr (int count, rtx frame);
-+extern bool avr32_got_mentioned_p (rtx addr);
-+
-+extern void avr32_final_prescan_insn (rtx insn, rtx * opvec, int noperands);
-+
-+extern int avr32_expand_movcc (enum machine_mode mode, rtx operands[]);
-+extern int avr32_expand_addcc (enum machine_mode mode, rtx operands[]);
-+#ifdef RTX_CODE
-+extern int avr32_expand_scc (RTX_CODE cond, rtx * operands);
-+#endif
-+
-+extern int avr32_store_bypass (rtx insn_out, rtx insn_in);
-+extern int avr32_mul_waw_bypass (rtx insn_out, rtx insn_in);
-+extern int avr32_valid_load_double_bypass (rtx insn_out, rtx insn_in);
-+extern int avr32_valid_load_quad_bypass (rtx insn_out, rtx insn_in);
-+extern rtx avr32_output_cmp (rtx cond, enum machine_mode mode,
-+			     rtx op0, rtx op1);
-+
-+rtx get_next_insn_cond (rtx cur_insn);
-+int set_next_insn_cond (rtx cur_insn, rtx cond);
-+void avr32_override_options (void);
-+
-+#endif /* AVR32_PROTOS_H */
---- /dev/null
-+++ b/gcc/config/avr32/crti.asm
-@@ -0,0 +1,64 @@
-+/*
-+   Init/fini stuff for AVR32.
-+   Copyright 2003-2006 Atmel Corporation.
-+
-+   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+
-+   This file is part of GCC.
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+	
-+/* The code in sections .init and .fini is supposed to be a single
-+   regular function.  The function in .init is called directly from
-+   start in crt1.asm.  The function in .fini is atexit()ed in crt1.asm
-+   too.
-+
-+   crti.asm contributes the prologue of a function to these sections,
-+   and crtn.asm comes up the epilogue.  STARTFILE_SPEC should list
-+   crti.o before any other object files that might add code to .init
-+   or .fini sections, and ENDFILE_SPEC should list crtn.o after any
-+   such object files.  */
-+		
-+	.file		"crti.asm"
-+
-+	.section	".init"
-+/* Just load the GOT */
-+	.align 2
-+	.global	_init
-+_init:
-+	stm	--sp, r6, lr
-+	lddpc	r6, 1f		
-+0:	
-+	rsub	r6, pc
-+	rjmp	2f
-+	.align	2
-+1:	.long	0b - _GLOBAL_OFFSET_TABLE_		
-+2:	
-+				
-+	.section	".fini"
-+/* Just load the GOT */
-+	.align	2
-+	.global	_fini
-+_fini:
-+	stm	--sp, r6, lr
-+	lddpc	r6, 1f		
-+0:	
-+	rsub	r6, pc
-+	rjmp	2f
-+	.align	2
-+1:	.long	0b - _GLOBAL_OFFSET_TABLE_		
-+2:	
-+
---- /dev/null
-+++ b/gcc/config/avr32/crtn.asm
-@@ -0,0 +1,44 @@
-+/*   Copyright (C) 2001 Free Software Foundation, Inc.
-+    Written By Nick Clifton
-+
-+  This file is free software; you can redistribute it and/or modify it
-+  under the terms of the GNU General Public License as published by the
-+  Free Software Foundation; either version 2, or (at your option) any
-+  later version.
-+
-+  In addition to the permissions in the GNU General Public License, the
-+  Free Software Foundation gives you unlimited permission to link the
-+  compiled version of this file with other programs, and to distribute
-+  those programs without any restriction coming from the use of this
-+  file.  (The General Public License restrictions do apply in other
-+  respects; for example, they cover modification of the file, and
-+  distribution when not linked into another program.)
-+
-+  This file is distributed in the hope that it will be useful, but
-+  WITHOUT ANY WARRANTY; without even the implied warranty of
-+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+  General Public License for more details.
-+
-+  You should have received a copy of the GNU General Public License
-+  along with this program; see the file COPYING.  If not, write to
-+  the Free Software Foundation, 59 Temple Place - Suite 330,
-+  Boston, MA 02111-1307, USA.
-+
-+     As a special exception, if you link this library with files
-+     compiled with GCC to produce an executable, this does not cause
-+     the resulting executable to be covered by the GNU General Public License.
-+     This exception does not however invalidate any other reasons why
-+     the executable file might be covered by the GNU General Public License.
-+*/
-+
-+
-+
-+	
-+	.file		"crtn.asm"
-+
-+	.section	".init"
-+	ldm	sp++, r6, pc
-+			
-+	.section	".fini"
-+	ldm	sp++, r6, pc
-+		
---- /dev/null
-+++ b/gcc/config/avr32/fpcp.md
-@@ -0,0 +1,551 @@
-+;;   AVR32 machine description file for Floating-Point instructions.
-+;;   Copyright 2003-2006 Atmel Corporation.
-+;;
-+;;   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+;;
-+;;   This file is part of GCC.
-+;;
-+;;   This program is free software; you can redistribute it and/or modify
-+;;   it under the terms of the GNU General Public License as published by
-+;;   the Free Software Foundation; either version 2 of the License, or
-+;;   (at your option) any later version.
-+;;
-+;;   This program is distributed in the hope that it will be useful,
-+;;   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;;   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+;;   GNU General Public License for more details.
-+;;
-+;;   You should have received a copy of the GNU General Public License
-+;;   along with this program; if not, write to the Free Software
-+;;   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+;; -*- Mode: Scheme -*-
-+
-+;;******************************************************************************
-+;; Automaton pipeline description for floating-point coprocessor insns
-+;;******************************************************************************
-+(define_cpu_unit "fid,fm1,fm2,fm3,fm4,fwb,fcmp,fcast" "avr32_ap")
-+
-+(define_insn_reservation "fmv_op" 1
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fmv"))
-+  "is,da,d,fid,fwb")
-+
-+(define_insn_reservation "fmul_op" 5
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fmul"))
-+  "is,da,d,fid,fm1,fm2,fm3,fm4,fwb")
-+
-+(define_insn_reservation "fcmps_op" 1
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fcmps"))
-+  "is,da,d,fid,fcmp")
-+
-+(define_insn_reservation "fcmpd_op" 2
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fcmpd"))
-+  "is,da,d,fid*2,fcmp")
-+
-+(define_insn_reservation "fcast_op" 3
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fcast"))
-+  "is,da,d,fid,fcmp,fcast,fwb")
-+
-+(define_insn_reservation "fmvcpu_op" 2
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fmvcpu"))
-+  "is,da,d")
-+
-+(define_insn_reservation "fldd_op" 1
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fldd"))
-+  "is,da,d,fwb")
-+
-+(define_insn_reservation "flds_op" 1
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "flds"))
-+  "is,da,d,fwb")
-+
-+(define_insn_reservation "fsts_op" 0
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fsts"))
-+  "is,da*2,d")
-+
-+(define_insn_reservation "fstd_op" 0
-+  (and (eq_attr "pipeline" "ap")
-+       (eq_attr "type" "fstd"))
-+  "is,da*2,d")
-+
-+
-+(define_insn "*movsf_fpcp"
-+  [(set (match_operand:SF 0 "nonimmediate_operand"     "=f,f,r,f,m,r,r,r,m")
-+	(match_operand:SF 1 "general_operand"          " f,r,f,m,f,r,G,m,r"))]
-+  "TARGET_HARD_FLOAT"
-+  "@
-+   fmov.s\t%0, %1
-+   fmov.s\t%0, %1
-+   fmov.s\t%0, %1
-+   fld.s\t%0, %1
-+   fst.s\t%0, %1
-+   mov\t%0, %1
-+   mov\t%0, %1
-+   ld.w\t%0, %1
-+   st.w\t%0, %1"
-+  [(set_attr "length" "4,4,4,4,4,2,4,4,4")
-+   (set_attr "type" "fmv,flds,fmvcpu,flds,fsts,alu,alu,load,store")])
-+
-+(define_insn_and_split "*movdf_fpcp"
-+  [(set (match_operand:DF 0 "nonimmediate_operand"     "=f,f,r,f,m,r,r,m")
-+	(match_operand:DF 1 "general_operand"          " f,r,f,m,f,r,m,r"))]
-+  "TARGET_HARD_FLOAT"
-+  "@
-+   fmov.d\t%0, %1
-+   fmov.d\t%0, %1
-+   fmov.d\t%0, %1
-+   fld.d\t%0, %1
-+   fst.d\t%0, %1
-+   mov\t%0, %1\;mov\t%m0, %m1
-+   ld.d\t%0, %1
-+   st.d\t%0, %1"
-+
-+  "TARGET_HARD_FLOAT
-+   && reload_completed
-+   && (REG_P(operands[0]) &&  (REGNO_REG_CLASS(REGNO(operands[0])) == GENERAL_REGS))
-+   && (REG_P(operands[1]) &&  (REGNO_REG_CLASS(REGNO(operands[1])) == GENERAL_REGS))"
-+  [(set (match_dup 0) (match_dup 1))
-+   (set (match_dup 2) (match_dup 3))]
-+  "
-+   {
-+    operands[2] = gen_highpart (SImode, operands[0]);
-+    operands[0] = gen_lowpart (SImode, operands[0]);
-+    operands[3] = gen_highpart(SImode, operands[1]);
-+    operands[1] = gen_lowpart(SImode, operands[1]);
-+   }
-+  "
-+
-+  [(set_attr "length" "4,4,4,4,4,4,4,4")
-+   (set_attr "type" "fmv,fldd,fmvcpu,fldd,fstd,alu2,load2,store2")])
-+
-+
-+(define_insn "mulsf3"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+		 (match_operand:SF 2 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fmul.s\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_insn "nmulsf3"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(neg:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+                         (match_operand:SF 2 "avr32_fp_register_operand" "f"))))]
-+  "TARGET_HARD_FLOAT"
-+  "fnmul.s\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "")
-+	(mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "")
-+		 (match_operand:SF 2 "avr32_fp_register_operand" "")))
-+   (set (match_operand:SF          3 "avr32_fp_register_operand" "")
-+	(neg:SF (match_dup 0)))]
-+  "TARGET_HARD_FLOAT &&
-+   (peep2_reg_dead_p(2, operands[0]) || (REGNO(operands[3]) == REGNO(operands[0])))"
-+  [(set (match_dup 3)
-+	(neg:SF (mult:SF (match_dup 1)
-+			 (match_dup 2))))]
-+)
-+
-+
-+(define_insn "macsf3"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(plus:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+                          (match_operand:SF 2 "avr32_fp_register_operand" "f"))
-+                 (match_operand:SF 3 "avr32_fp_register_operand" "0")))]
-+  "TARGET_HARD_FLOAT"
-+  "fmac.s\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_insn "nmacsf3"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(plus:SF  (neg:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+                                   (match_operand:SF 2 "avr32_fp_register_operand" "f")))
-+                  (match_operand:SF 3 "avr32_fp_register_operand" "0")))]
-+  "TARGET_HARD_FLOAT"
-+  "fnmac.s\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "")
-+	(mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "")
-+		 (match_operand:SF 2 "avr32_fp_register_operand" "")))
-+   (set (match_operand:SF          3 "avr32_fp_register_operand" "")
-+	(minus:SF
-+	 (match_dup 3)
-+	 (match_dup 0)))]
-+  "TARGET_HARD_FLOAT && peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 3)
-+	(plus:SF  (neg:SF (mult:SF (match_dup 1)
-+                                   (match_dup 2)))
-+                  (match_dup 3)))]
-+)
-+
-+
-+(define_insn "msubacsf3"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(minus:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+                           (match_operand:SF 2 "avr32_fp_register_operand" "f"))
-+                  (match_operand:SF 3 "avr32_fp_register_operand" "0")))]
-+  "TARGET_HARD_FLOAT"
-+  "fmsc.s\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "")
-+	(mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "")
-+		 (match_operand:SF 2 "avr32_fp_register_operand" "")))
-+   (set (match_operand:SF          3 "avr32_fp_register_operand" "")
-+	(minus:SF
-+	 (match_dup 0)
-+	 (match_dup 3)))]
-+  "TARGET_HARD_FLOAT && peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 3)
-+	(minus:SF  (mult:SF (match_dup 1)
-+			    (match_dup 2))
-+		   (match_dup 3)))]
-+)
-+
-+(define_insn "nmsubacsf3"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(minus:SF  (neg:SF (mult:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+                                    (match_operand:SF 2 "avr32_fp_register_operand" "f")))
-+                   (match_operand:SF 3 "avr32_fp_register_operand" "0")))]
-+  "TARGET_HARD_FLOAT"
-+  "fnmsc.s\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+
-+
-+(define_insn "addsf3"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(plus:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+		 (match_operand:SF 2 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fadd.s\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_insn "subsf3"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(minus:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")
-+                  (match_operand:SF 2 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fsub.s\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+
-+(define_insn "negsf2"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(neg:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fneg.s\t%0, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmv")])
-+
-+(define_insn "abssf2"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(abs:SF (match_operand:SF 1 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fabs.s\t%0, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmv")])
-+
-+(define_insn "truncdfsf2"
-+  [(set (match_operand:SF          0 "avr32_fp_register_operand" "=f")
-+	(float_truncate:SF
-+         (match_operand:DF 1 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fcastd.s\t%0, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fcast")])
-+
-+(define_insn "extendsfdf2"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(float_extend:DF
-+         (match_operand:SF 1 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fcasts.d\t%0, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fcast")])
-+
-+(define_insn "muldf3"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+		 (match_operand:DF 2 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fmul.d\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_insn "nmuldf3"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(neg:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+                         (match_operand:DF 2 "avr32_fp_register_operand" "f"))))]
-+  "TARGET_HARD_FLOAT"
-+  "fnmul.d\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "")
-+	(mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "")
-+		 (match_operand:DF 2 "avr32_fp_register_operand" "")))
-+   (set (match_operand:DF          3 "avr32_fp_register_operand" "")
-+	(neg:DF (match_dup 0)))]
-+  "TARGET_HARD_FLOAT &&
-+   (peep2_reg_dead_p(2, operands[0]) || (REGNO(operands[3]) == REGNO(operands[0])))"
-+  [(set (match_dup 3)
-+	(neg:DF (mult:DF (match_dup 1)
-+			 (match_dup 2))))]
-+)
-+
-+(define_insn "macdf3"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(plus:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+                          (match_operand:DF 2 "avr32_fp_register_operand" "f"))
-+                 (match_operand:DF 3 "avr32_fp_register_operand" "0")))]
-+  "TARGET_HARD_FLOAT"
-+  "fmac.d\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_insn "msubacdf3"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(minus:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+                           (match_operand:DF 2 "avr32_fp_register_operand" "f"))
-+                  (match_operand:DF 3 "avr32_fp_register_operand" "0")))]
-+  "TARGET_HARD_FLOAT"
-+  "fmsc.d\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "")
-+	(mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "")
-+		 (match_operand:DF 2 "avr32_fp_register_operand" "")))
-+   (set (match_operand:DF          3 "avr32_fp_register_operand" "")
-+	(minus:DF
-+	 (match_dup 0)
-+	 (match_dup 3)))]
-+  "TARGET_HARD_FLOAT && peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 3)
-+	(minus:DF  (mult:DF (match_dup 1)
-+			    (match_dup 2))
-+		   (match_dup 3)))]
-+  )
-+
-+(define_insn "nmsubacdf3"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(minus:DF  (neg:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+                                    (match_operand:DF 2 "avr32_fp_register_operand" "f")))
-+                   (match_operand:DF 3 "avr32_fp_register_operand" "0")))]
-+  "TARGET_HARD_FLOAT"
-+  "fnmsc.d\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_insn "nmacdf3"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(plus:DF  (neg:DF (mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+                                   (match_operand:DF 2 "avr32_fp_register_operand" "f")))
-+                  (match_operand:DF 3 "avr32_fp_register_operand" "0")))]
-+  "TARGET_HARD_FLOAT"
-+  "fnmac.d\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_peephole2
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "")
-+	(mult:DF (match_operand:DF 1 "avr32_fp_register_operand" "")
-+		 (match_operand:DF 2 "avr32_fp_register_operand" "")))
-+   (set (match_operand:DF          3 "avr32_fp_register_operand" "")
-+	(minus:DF
-+	 (match_dup 3)
-+	 (match_dup 0)))]
-+  "TARGET_HARD_FLOAT && peep2_reg_dead_p(2, operands[0])"
-+  [(set (match_dup 3)
-+	(plus:DF  (neg:DF (mult:DF (match_dup 1)
-+                                   (match_dup 2)))
-+                  (match_dup 3)))]
-+)
-+
-+(define_insn "adddf3"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(plus:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+		 (match_operand:DF 2 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fadd.d\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_insn "subdf3"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(minus:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")
-+                  (match_operand:DF 2 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fsub.d\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmul")])
-+
-+(define_insn "negdf2"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(neg:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fneg.d\t%0, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmv")])
-+
-+(define_insn "absdf2"
-+  [(set (match_operand:DF          0 "avr32_fp_register_operand" "=f")
-+	(abs:DF (match_operand:DF 1 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  "fabs.d\t%0, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmv")])
-+
-+
-+(define_expand "cmpdf"
-+  [(set (cc0)
-+	(compare:DF
-+	 (match_operand:DF 0 "general_operand" "")
-+	 (match_operand:DF 1 "general_operand"  "")))]
-+  "TARGET_HARD_FLOAT"
-+  "{
-+   rtx tmpreg;
-+   if ( !REG_P(operands[0]) )
-+     operands[0] = force_reg(DFmode, operands[0]);
-+
-+   if ( !REG_P(operands[1]) )
-+     operands[1] = force_reg(DFmode, operands[1]);
-+
-+   avr32_compare_op0 = operands[0];
-+   avr32_compare_op1 = operands[1];
-+
-+   emit_insn(gen_cmpdf_internal(operands[0], operands[1]));
-+
-+   tmpreg = gen_reg_rtx(SImode);
-+   emit_insn(gen_fpcc_to_reg(tmpreg));
-+   emit_insn(gen_reg_to_cc(tmpreg));
-+
-+   DONE;
-+  }"
-+)
-+
-+(define_insn "cmpdf_internal"
-+  [(set (reg:CC FPCC_REGNUM)
-+	(compare:CC
-+	 (match_operand:DF 0 "avr32_fp_register_operand" "f")
-+	 (match_operand:DF 1 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  {
-+   if (!rtx_equal_p(cc_prev_status.mdep.fpvalue, SET_SRC(PATTERN (insn))) )
-+      return "fcmp.d\t%0, %1";
-+   return "";
-+  }
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fcmpd")
-+   (set_attr "cc" "fpcompare")])
-+
-+(define_expand "cmpsf"
-+  [(set (cc0)
-+	(compare:SF
-+	 (match_operand:SF 0 "general_operand" "")
-+	 (match_operand:SF 1 "general_operand"  "")))]
-+  "TARGET_HARD_FLOAT"
-+  "{
-+   rtx tmpreg;
-+   if ( !REG_P(operands[0]) )
-+     operands[0] = force_reg(SFmode, operands[0]);
-+
-+   if ( !REG_P(operands[1]) )
-+     operands[1] = force_reg(SFmode, operands[1]);
-+
-+   avr32_compare_op0 = operands[0];
-+   avr32_compare_op1 = operands[1];
-+
-+   emit_insn(gen_cmpsf_internal(operands[0], operands[1]));
-+
-+   tmpreg = gen_reg_rtx(SImode);
-+   emit_insn(gen_fpcc_to_reg(tmpreg));
-+   emit_insn(gen_reg_to_cc(tmpreg));
-+
-+   DONE;
-+  }"
-+)
-+
-+(define_insn "cmpsf_internal"
-+  [(set (reg:CC FPCC_REGNUM)
-+	(compare:CC
-+	 (match_operand:SF 0 "avr32_fp_register_operand" "f")
-+	 (match_operand:SF 1 "avr32_fp_register_operand" "f")))]
-+  "TARGET_HARD_FLOAT"
-+  {
-+   if (!rtx_equal_p(cc_prev_status.mdep.fpvalue, SET_SRC(PATTERN (insn))) )
-+      return "fcmp.s\t%0, %1";
-+   return "";
-+  }
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fcmps")
-+   (set_attr "cc" "fpcompare")])
-+
-+(define_insn "fpcc_to_reg"
-+  [(set (match_operand:SI 0 "register_operand" "=r")
-+	(unspec:SI [(reg:CC FPCC_REGNUM)]
-+		   UNSPEC_FPCC_TO_REG))]
-+  "TARGET_HARD_FLOAT"
-+  "fmov.s\t%0, fsr"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "fmvcpu")])
-+
-+(define_insn "reg_to_cc"
-+  [(set (cc0)
-+	(unspec:SI [(match_operand:SI 0 "register_operand" "r")]
-+		   UNSPEC_REG_TO_CC))]
-+  "TARGET_HARD_FLOAT"
-+  "musfr\t%0"
-+  [(set_attr "length" "2")
-+   (set_attr "type" "alu")
-+   (set_attr "cc" "from_fpcc")])
-+
-+(define_insn "stm_fp"
-+  [(unspec [(match_operand 0 "register_operand" "r")
-+            (match_operand 1 "const_int_operand" "")
-+            (match_operand 2 "const_int_operand" "")]
-+	   UNSPEC_STMFP)]
-+  "TARGET_HARD_FLOAT"
-+  {
-+    int cop_reglist = INTVAL(operands[1]);
-+
-+    if (INTVAL(operands[2]) != 0)
-+      return "stcm.w\tcp0, --%0, %C1";
-+    else
-+      return "stcm.w\tcp0, %0, %C1";
-+
-+    if ( cop_reglist & ~0xff ){
-+      operands[1] = GEN_INT(cop_reglist & ~0xff);
-+      if (INTVAL(operands[2]) != 0)
-+         return "stcm.d\tcp0, --%0, %D1";
-+      else
-+         return "stcm.d\tcp0, %0, %D1";
-+    }
-+  }
-+  [(set_attr "type" "fstm")
-+   (set_attr "length" "4")
-+   (set_attr "cc" "none")])
---- /dev/null
-+++ b/gcc/config/avr32/lib1funcs.S
-@@ -0,0 +1,1678 @@
-+/*#define __IEEE_LARGE_FLOATS__*/
-+
-+/* Adjust the unpacked double number if it is a subnormal number.
-+   The exponent and mantissa pair are stored
-+   in [mant_hi,mant_lo] and [exp]. A register with the correct sign bit in
-+   the MSB is passed in [sign]. Needs two scratch
-+   registers [scratch1] and [scratch2]. An adjusted and packed double float
-+   is present in [mant_hi,mant_lo] after macro has executed */
-+.macro	adjust_subnormal_df	exp, mant_lo, mant_hi, sign, scratch1, scratch2	
-+        /* We have an exponent which is <=0 indicating a subnormal number
-+           As it should be stored as if the exponent was 1 (although the
-+           exponent field is all zeros to indicate a subnormal number)
-+           we have to shift down the mantissa to its correct position. */
-+        neg     \exp
-+        sub     \exp,-1                   /* amount to shift down */
-+        cp.w    \exp,54
-+        brlo    50f			/* if more than 53 shift steps, the
-+                                           entire mantissa will disappear
-+                                           without any rounding to occur */
-+	mov	\mant_hi, 0
-+	mov	\mant_lo, 0
-+	rjmp	52f
-+50:	
-+        sub     \exp,-10                /* do the shift to position the
-+                                           mantissa at the same time
-+                                           note! this does not include the
-+                                           final 1 step shift to add the sign */
-+
-+        /* when shifting, save all shifted out bits in [scratch2]. we may need to
-+           look at them to make correct rounding. */
-+
-+        rsub    \scratch1,\exp,32       /* get inverted shift count */
-+        cp.w    \exp,32                 /* handle shifts >= 32 separately */
-+        brhs    51f
-+
-+        /* small (<32) shift amount, both words are part of the shift */
-+        lsl     \scratch2,\mant_lo,\scratch1               /* save bits to shift out from lsw*/
-+        lsl     \scratch1,\mant_hi,\scratch1               /* get bits from msw destined for lsw*/
-+        lsr     \mant_lo,\mant_lo,\exp			   /* shift down lsw */
-+        lsr     \mant_hi,\mant_hi,\exp			   /* shift down msw */
-+        or      \mant_hi,\scratch1                         /* add bits from msw with prepared lsw */
-+        rjmp    50f
-+
-+        /* large (>=32) shift amount, only lsw will have bits left after shift.
-+           note that shift operations will use ((shift count) mod 32) so
-+           we do not need to subtract 32 from shift count. */
-+51:
-+        lsl     \scratch2,\mant_hi,\scratch1               /* save bits to shift out from msw */
-+        or      \scratch2,\mant_lo                         /* also save all bits from lsw */
-+        mov     \mant_lo,\mant_hi                          /* msw -> lsw (i.e. "shift 32 first") */
-+        mov     \mant_hi,0                                 /* clear msw */
-+        lsr     \mant_lo,\mant_lo,\exp                     /* make rest of shift inside lsw */
-+
-+50:
-+        /* result is almost ready to return, except that least significant bit
-+           and the part we already shifted out may cause the result to be
-+           rounded */
-+        bld     \mant_lo,0                   /* get bit to be shifted out */
-+        brcc    51f			     /* if bit was 0, no rounding */
-+
-+        /* msb of part to remove is 1, so rounding depends on rest of bits */
-+        tst     \scratch2,\scratch2                   /* get shifted out tail */
-+        brne    50f     /* if rest > 0, do round */
-+        bld     \mant_lo,1                   /* we have to look at lsb in result */
-+        brcc    51f   /* if lsb is 0, don't round */
-+
-+50:
-+        /* subnormal result requires rounding
-+           rounding may cause subnormal to become smallest normal number
-+           luckily, smallest normal number has exactly the representation
-+           we got by rippling a one bit up from mantissa into exponent field. */
-+        sub     \mant_lo,-1
-+        subcc   \mant_hi,-1
-+
-+51:
-+        /* shift and return packed double with correct sign */
-+	rol	\sign
-+        ror     \mant_hi
-+        ror     \mant_lo	
-+52:	
-+.endm
-+
-+
-+/* Adjust subnormal single float number with exponent [exp]
-+   and mantissa [mant] and round.    */
-+.macro	adjust_subnormal_sf	sf, exp, mant, sign, scratch
-+		/* subnormal number */
-+        rsub    \exp,\exp, 1		/* shift amount */
-+        cp.w    \exp, 25
-+	movhs	\mant, 0		
-+        brhs    90f			/* Return zero */
-+	rsub	\scratch, \exp, 32
-+	lsl	\scratch, \mant,\scratch/* Check if there are any bits set
-+					   in the bits discarded in the mantissa */
-+	srne	\scratch		/* If so set the lsb of the shifted mantissa */	
-+        lsr     \mant,\mant,\exp	/* Shift the mantissa */
-+	or	\mant, \scratch		/* Round lsb if any bits were shifted out  */
-+	/* Rounding :	For explaination, see round_sf. */
-+	mov	\scratch, 0x7f		/* Set rounding constant */
-+	bld	\mant, 8		
-+	subeq	\scratch, -1		/* For odd numbers use rounding constant 0x80 */
-+	add	\mant, \scratch		/* Add rounding constant to mantissa */
-+	/* We can't overflow because mantissa is at least shifted one position
-+	   to the right so the implicit bit is zero. We can however get the implicit
-+	   bit set after rounding which means that we have the lowest normal number
-+	   but this is ok since this bit has the same position as the LSB of the
-+	   exponent */
-+	lsr	\sf, \mant, 7
-+	/* Rotate in sign */
-+	lsl	\sign, 1
-+	ror	\sf
-+90:	
-+.endm
-+
-+
-+/* Round the unpacked df number with exponent [exp] and
-+   mantissa [mant_hi, mant_lo]. Uses scratch register
-+   [scratch] */
-+.macro	round_df	exp, mant_lo, mant_hi, scratch
-+        mov     \scratch, 0x3ff		/* Rounding constant */
-+        bld     \mant_lo,11		/* Check if lsb in the final result is	
-+					   set */
-+	subeq	\scratch, -1		/* Adjust rounding constant to 0x400
-+					   if rounding 0.5 upwards */	
-+	add	\mant_lo, \scratch	/* Round */
-+        acr	\mant_hi		/* If overflowing we know that
-+					   we have all zeros in the bits not
-+					   scaled out so we can leave them
-+					   but we must increase the exponent with
-+					   two since we had an implicit bit
-+				           which is lost + the extra overflow bit */
-+	subcs	\exp, -2		/* Update exponent */
-+.endm		
-+
-+/* Round single float number stored in [mant] and [exp] */
-+.macro	round_sf	exp, mant, scratch
-+	/* Round:	
-+		For 0.5 we round to nearest even integer
-+		for all other cases we round to nearest integer.
-+		This means that if the digit left of the "point" (.)
-+		is 1 we can add 0x80 to the mantissa since the
-+		corner case 0x180 will round up to 0x200. If the
-+		digit left of the "point" is 0 we will have to
-+		add 0x7f since this will give 0xff and hence a
-+		truncation/rounding downwards for the corner
-+		case when the 9 lowest bits are 0x080 */
-+	mov	\scratch, 0x7f	/* Set rounding constant */
-+	/* Check if the mantissa is even or odd */
-+	bld	\mant, 8
-+	subeq	\scratch, -1	/* Rounding constant should be 0x80 */
-+	add	\mant, \scratch
-+	subcs	\exp, -2	/* Adjust exponent if we overflowed */		
-+.endm
-+
-+/* Scale mantissa [mant_hi, mant_lo] with amount [shift_count].
-+   Uses scratch registers [scratch1] and [scratch2] */
-+.macro	scale_df	shift_count, mant_lo, mant_hi, scratch1, scratch2	
-+        /* Scale [mant_hi, mant_lo] with shift_amount.
-+	   Must not forget the sticky bits we intend to shift out. */
-+
-+        rsub    \scratch1,\shift_count,32/* get (32 - shift count)
-+                                           (if shift count > 32 we get a
-+                                           negative value, but that will
-+                                           work as well in the code below.) */
-+
-+        cp.w    \shift_count,32          /* handle shifts >= 32 separately */
-+        brhs    70f
-+
-+        /* small (<32) shift amount, both words are part of the shift
-+           first remember whether part that is lost contains any 1 bits ... */
-+        lsl     \scratch2,\mant_lo,\scratch1  /*shift away bits that are part of
-+						final mantissa. only part that goes
-+						to scratch2 are bits that will be lost */
-+
-+        /* ... and now to the actual shift */
-+        lsl     \scratch1,\mant_hi,\scratch1  /* get bits from msw destined for lsw*/
-+        lsr     \mant_lo,\mant_lo,\shift_count   /* shift down lsw of mantissa */
-+        lsr     \mant_hi,\mant_hi,\shift_count   /* shift down msw of mantissa */
-+        or      \mant_lo,\scratch1               /* combine these bits with prepared lsw*/
-+        rjmp    71f
-+
-+        /* large (>=32) shift amount, only lsw will have bits left after shift.
-+           note that shift operations will use ((shift count) mod 32) so
-+           we do not need to subtract 32 from shift count. */
-+70:
-+        /* first remember whether part that is lost contains any 1 bits ... */
-+        lsl     \scratch2,\mant_hi,\scratch1   /* save all lost bits from msw */
-+        or      \scratch2,\mant_lo             /* also save lost bits (all) from lsw
-+                                                  now scratch2<>0 if we lose any bits */
-+
-+        /* ... and now to the actual shift */
-+        mov     \mant_lo,\mant_hi             /* msw -> lsw (i.e. "shift 32 first")*/
-+        mov     \mant_hi,0                    /* clear msw */
-+        lsr     \mant_lo,\mant_lo,\shift_count /* make rest of shift inside lsw*/
-+
-+71:
-+        cp.w    \scratch2,0                    /* if any '1' bit in part we lost ...*/
-+        breq    70f
-+
-+        sbr     \mant_lo,0                    /* ... we need to set sticky bit*/
-+70:		
-+.endm
-+		
-+/* Unpack exponent and mantissa from the double number
-+   stored in [df_hi,df_lo]. The exponent is stored in [exp]
-+   while the mantissa is stored in [df_hi,df_lo]. */
-+	
-+.macro	unpack_df		exp, df_lo, df_hi
-+	lsr     \exp, \df_hi,21               /* Extract exponent */
-+        lsl     \df_hi,10                     /* Get mantissa */
-+        or      \df_hi,\df_hi,\df_lo>>21
-+        lsl     \df_lo,11
-+
-+        neg     \exp			      /* Fix implicit bit */
-+        bst     \df_hi,31
-+        subeq   \exp,1
-+	neg     \exp			      /* negate back exponent */
-+	.endm
-+	
-+/* Unpack exponent and mantissa from the single float number
-+   stored in [sf]. The exponent is stored in [exp]
-+   while the mantissa is stored in [sf]. */ 	
-+.macro	unpack_sf		exp, sf
-+	lsr	\exp, \sf, 24
-+	brne	80f
-+       	/* Fix subnormal number */
-+        lsl     \sf,7
-+        clz     \exp,\sf
-+        lsl     \sf,\sf,\exp
-+        rsub	\exp,\exp,1
-+	rjmp	81f
-+80:	
-+        lsl     \sf,7
-+	sbr	\sf, 31 /*Implicit bit*/
-+81:	
-+.endm
-+
-+
-+
-+/* Pack a single float number stored in [mant] and [exp]
-+   into a single float number in [sf]  */
-+.macro	pack_sf	sf, exp, mant
-+        bld     \mant,31                  /* implicit bit to z */
-+        subne   \exp,1                   /* if subnormal (implicit bit 0)
-+                                          adjust exponent to storage format */
-+	
-+	lsr	\sf, \mant, 7
-+	bfins	\sf, \exp, 24, 8
-+.endm	
-+
-+/* Pack exponent [exp] and mantissa [mant_hi, mant_lo]
-+   into [df_hi, df_lo].  [df_hi] is shifted
-+   one bit up so the sign bit can be shifted into it */
-+	
-+.macro	pack_df		exp, mant_lo, mant_hi, df_lo, df_hi
-+        bld     \mant_hi,31                  /* implicit bit to z */
-+        subne   \exp,1                   /* if subnormal (implicit bit 0)
-+                                          adjust exponent to storage format */
-+
-+        lsr     \mant_lo,11                  /* shift back lsw */
-+        or      \df_lo,\mant_lo,\mant_hi<<21          /* combine with low bits from msw */
-+        lsl     \mant_hi,1                   /* get rid of implicit bit */
-+        lsr     \mant_hi,11                  /* shift back msw except for one step*/
-+        or      \df_hi,\mant_hi,\exp<<21          /* combine msw with exponent */
-+.endm
-+
-+/* Normalize single float number stored in [mant] and [exp]
-+   using scratch register [scratch] */
-+.macro	normalize_sf	exp, mant, scratch
-+	/* Adjust exponent and mantissa */
-+	clz	\scratch, \mant
-+	sub	\exp, \scratch
-+	lsl	\mant, \mant, \scratch
-+.endm
-+
-+/* Normalize the exponent and mantissa pair stored
-+   in [mant_hi,mant_lo] and [exp]. Needs two scratch
-+   registers [scratch1] and [scratch2]. */
-+.macro	normalize_df		exp, mant_lo, mant_hi, scratch1, scratch2
-+        clz     \scratch1,\mant_hi     /* Check if we have zeros in high bits */
-+        breq    80f                     /* No need for scaling if no zeros in high bits */
-+        cp.w    \scratch1,32           /* Check for all zeros */
-+        breq    81f		
-+
-+        /* shift amount is smaller than 32, and involves both msw and lsw*/
-+        rsub    \scratch2,\scratch1,32  /* shift mantissa */
-+        lsl     \mant_hi,\mant_hi,\scratch1
-+        lsr     \scratch2,\mant_lo,\scratch2
-+        or      \mant_hi,\scratch2
-+        lsl     \mant_lo,\mant_lo,\scratch1
-+        sub     \exp,\scratch1          /* adjust exponent */
-+	rjmp	80f			/* Finished */	
-+81:
-+        /* shift amount is greater than 32 */
-+        clz     \scratch1,\mant_lo      /* shift mantissa */
-+        sub     \scratch1,-32
-+        mov     \mant_hi,\mant_lo
-+        lsl     \mant_hi,\mant_hi,\scratch1
-+        mov     \mant_lo,0
-+        sub     \exp,\scratch1          /* adjust exponent */
-+80:	
-+.endm
-+	
-+
-+#ifdef L_avr32_f64_mul
-+	.align	2
-+	.global __avr32_f64_mul
-+	.type  __avr32_f64_mul,@function
-+
-+__avr32_f64_mul:
-+	pushm	r0-r3,r4-r7,lr
-+	
-+        /* Unpack */
-+	eor	r12, r11, r9		/* Sign op1 ^ Sign op2 is MSB of r12*/
-+        lsl     r11,1                   /* Unpack op1 */
-+        lsl     r9,1                    /* Unpack op2 */
-+
-+        /* Sort operands op1 >= op2 */
-+        lddpc   r5, .Linf
-+        cp.w    r10,r8
-+        cpc     r11,r9
-+        brhs    0f
-+
-+        mov     r7,r11                  /* swap operands if op2 was larger */
-+        mov     r6,r10
-+        mov     r11,r9
-+        mov     r10,r8
-+        mov     r9,r7
-+        mov     r8,r6
-+
-+0:
-+	/* Check against infinity */
-+        cp.w    r11,r5
-+        brlo    1f
-+	/* infinity or nan */
-+        /* we have to check low word as well as nan mantissa may be 0 in msw*/
-+        cpc     r10
-+        /* we know that op1 is inf or nan. if z != 1 then we have nan.
-+            in this case, also return nan. */
-+        breq    0f
-+	/* Return NaN */
-+	mov	r11, -1
-+	rjmp	__dfmul_return_op1	
-+0:	
-+
-+        /* op1 is infinity. op2 is smaller or same so it cannot be nan.
-+           it can be infinity or a (sub-)normal number.
-+           we should return op1 (infinity) except when op2 is zero when
-+           result should be nan. */
-+        or      r5,r9,r8
-+        brne    __dfmul_return_op1       /* op2 is not zero. return op1.*/
-+	/* Return NaN */
-+	mov	r11, -1
-+	rjmp	__dfmul_return_op1	
-+	
-+1:	
-+        /* no operand is inf/nan, and operands have been arranged in order
-+           with op1 >= op2, implying that if we have a zero, it is found in
-+           op2. in this case, result should be zero (with sign from both ops). */
-+
-+        or      r5,r9,r8                /* check the smaller value for zero */
-+        brne    0f
-+	mov	r10, 0
-+	mov	r11, 0
-+	rjmp	__dfmul_return_op1			/* Early exit */
-+0:		
-+
-+        /* we have two "normal" (can be subnormal) nonzero numbers in r11:r10
-+           and r9:r8. sign of result is already calculated in r12.
-+           perform a normal multiplication. */
-+
-+        /* Unpack and normalize*/
-+	unpack_df	r7 /*exp*/, r10, r11 /* mantissa */
-+	normalize_df	r7 /*exp*/, r10, r11 /* mantissa */, r4, r5 /* scratch */
-+	
-+
-+        /* Unpack and normalize*/
-+	unpack_df	r6 /*exp*/, r8, r9 /* mantissa */
-+	normalize_df	r6 /*exp*/, r8, r9 /* mantissa */, r4, r5 /* scratch */
-+
-+        /* Multiply */
-+
-+        mulu.d  r0,r10,r8
-+        add     lr,r7,r6                   /* calculate new exponent after mul */
-+        mulu.d  r2,r11,r8
-+        sub     lr,(1023-1)             /* remove exponent bias as we have
-+                                           included bias from both op1 and op2
-+                                           sub one less, or in other words
-+                                           add one to exponent. see below why. */
-+        mulu.d  r6,r11,r9
-+        add     r2,r1
-+        mulu.d  r4,r10,r9
-+
-+
-+        adc     r6,r6,r3
-+        acr     r7
-+
-+        add     r4,r2
-+        adc     r6,r6,r5
-+        acr     r7
-+
-+        // r7:r6 is now in range [0x4000...0000 - 0xffff...fffe]
-+        // remaining bits in r0 and r4 are of no interest, except that we have
-+        // to add a sticky bit to r10 in case we had a 1 bit in r4 or r0.
-+
-+        or      r4,r0
-+	movne	r0, 1			/* If we have bits in r4 or r0 */
-+        or      r6,r0                   /*   set lsb of result to 1 */
-+
-+
-+        // if msb is set, it was because multiplication gave an "overflow"
-+        // of one bit so exponent should be incremented.
-+        // we already did that above so we are done.
-+        // if msb is *not* set it will be normalized and exponent will be
-+        // decremented (which will compensate the one we added above).
-+
-+	normalize_df	lr /*exp*/, r6, r7 /* mantissa */, r8, r9 /* scratch */
-+
-+	/* Check if a subnormal result was created */
-+	cp.w	lr, 0
-+	brgt	0f
-+	
-+	adjust_subnormal_df	lr, r6, r7, r12, r8, r9			
-+	mov	r10, r6
-+	mov	r11, r7
-+	popm	r0-r3,r4-r7, pc
-+0:
-+	
-+        /* Round result */
-+        round_df	lr /*exp*/, r6, r7 /* Mantissa */, r4 /*scratch*/
-+        cp.w    lr,0x7ff
-+        brlt    0f
-+	/*Return infinity */
-+	lddpc	r11, .Linf
-+	mov	r10, 0
-+	rjmp	__dfmul_return_op1
-+	
-+0:
-+
-+	/* Pack */
-+	pack_df	lr /*exp*/, r6, r7 /* mantissa */, r10, r11 /* Output df number*/
-+__dfmul_return_op1:	
-+        lsl     r12,1		       /* shift in sign bit */
-+        ror     r11
-+	
-+	popm	r0-r3,r4-r7, pc
-+	
-+#endif
-+		
-+
-+#ifdef	L_avr32_f64_addsub	
-+	.align	2
-+	.global __avr32_f64_sub
-+	.type  __avr32_f64_sub,@function
-+
-+__avr32_f64_sub:
-+	pushm	r4-r7,lr	
-+
-+        eor     r12,r11,r9               // compare signs of operands
-+        bld     r12,31
-+        brcc    __dfsub                 // same sign => subtract
-+
-+        eorh    r9,0x8000
-+        rjmp    __dfadd               // different signs => op1 + (-op2)
-+__dfsub:
-+
-+        lsl     r11,1                   // unpack op1 msw and get sign in c
-+        or      r4,r11,r10              // check if all bits zero
-+        brne    1f
-+
-+        // op1 is zero, negate op2 and handle as add
-+        eorh    r9,0x8000
-+        // op1 is +/-0, and is unpacked with sign in c. add to op2.
-+        // also used by sub, but op2 has been negated in this case
-+        ror     r12                     // save sign of op1 in msb of r12
-+        lsl     r9,1                    // unpack msw and get sign of op2
-+        or      r4,r9,r8                // check all bits in op2
-+        breq    0f
-+
-+        // if op2 != 0, then return op2 unchanged.
-+        ror     r9                      // pack op2 msw again with sign from c
-+        mov     r11,r9
-+        mov     r10,r8
-+        popm    r4-r7,pc
-+
-+0:
-+        // both op1 and op2 zero, but sign unknown. result should and signs.
-+        ror     r9                      // pack op2 msw again with sign from c
-+        lsl     r12,1                   // get back sign of op1 into c ...
-+        ror     r11                     // and back in original op1
-+        and     r11,r9                  // and sign bits. as op1 is zero, the
-+                                        // only bit which can be 1 is sign bit
-+	popm	r4-r7,pc
-+
-+1:
-+        ror     r12                     // save op1 sign in msb of r12
-+
-+        lsl     r9,1                    // unpack op2 msw
-+        or      r4,r8,r9
-+        brne    0f
-+					   // op2 is zero, return op1
-+                                        // whatever it is. the only case
-+                                        // requiring special handling is if
-+                                        // op1 is zero, but that was handled
-+                                        // above.
-+	lsl	r12, 1
-+	ror	r11
-+	popm	r4-r7,pc
-+	
-+0:	
-+        // make sure that op1 >= op2, flip sign if we swap ops
-+        cp.w    r10,r8
-+        cpc     r11,r9
-+        brhs    0f
-+
-+        com     r12                     // sign of op1 and result in lsb(r12)
-+        mov     r7,r11                  // swap operands if op2 was larger
-+        mov     r6,r10
-+        mov     r11,r9
-+        mov     r10,r8
-+        mov     r9,r7
-+        mov     r8,r6
-+
-+0:
-+        // check if op1 is nan or inf.
-+        lddpc   r5,.Linf
-+        cp.w    r11,r5
-+        brlo    1f
-+	/* Op 1 is nan or inf */
-+        // we have to check low word as well as nan mantissa may be 0 in msw
-+        cpc     r10
-+        // we know that op1 is inf or nan. if z != 1 then we have nan.
-+        // if we have nan, return nan.
-+        breq  0f
-+	mov	r11, -1
-+	rjmp	__dfsub_return_op1			
-+0:
-+
-+        // op1 is infinity. check if op2 is nan, infinty or a normal number.
-+        cp.w    r9,r5
-+	movhs	r11, -1     // op2 is a normal number. return op1.
-+
-+        // op2 can be infinity (of the same sign as op1) or nan.
-+        // in both cases we should return nan.
-+        rjmp    __dfsub_return_op1
-+1:	
-+        // if op1 is not inf or nan, then op2 cannot be since op1 >= op2
-+
-+        // now prepare the operands by expanding them and shifting op2
-+        // to the correct position for the subtract. note! if op2 is
-+        // insignificant compared to op1, the function will take care of
-+        // this and return op1 directly to the application.
-+	
-+	/* Unpack operands */
-+	unpack_df	r7 /* exp op1*/, r10, r11 /* Mantissa op1 */	
-+	unpack_df	r6 /* exp op2*/, r8, r9 /* Mantissa op2 */	
-+
-+	/* Get shift amount required for aligning op1 and op2 */
-+	rsub	r6, r7
-+	breq	__perform_dfsub	/* No shift needed */
-+
-+	cp.w	r6, 63
-+	brhs	__dfsub_pack_result	/* Op 2 insignificant compared to op1 */
-+
-+	/* Shift mantissa of op2 so that op1 and op2 are aligned */
-+	scale_df	r6 /* shift_count*/, r8, r9 /* Mantissa */, r4, r5 /*Scratch*/
-+	
-+__perform_dfsub:			
-+        sub     r10,r8                  /* subtract mantissa of op2 from op1 */
-+        sbc     r11,r11,r9
-+        or      r4,r11,r10              /* check if result is all zeroes */
-+	brne	0f
-+	popm	r4-r7,pc		/* Early return */
-+0:	
-+	
-+	normalize_df	r7 /*exp*/, r10, r11 /* mantissa */, r8, r9 /* scratch */
-+
-+	/* Check if a subnormal result was created */
-+	cp.w	r7, 0
-+	brgt	0f
-+	
-+	adjust_subnormal_df	r7 /*exp*/, r10, r11 /* Mantissa */, r12 /*sign*/, r8, r9 /*scratch*/			
-+	popm	r4-r7,pc
-+0:
-+	
-+        /* Round result */
-+        round_df	r7 /*exp*/, r10, r11 /* Mantissa */, r9 /*scratch*/
-+        cp.w    r7,0x7ff
-+        brlt    __dfsub_pack_result
-+	/*Return infinity */
-+	lddpc	r11, .Linf
-+	mov	r10, 0
-+	rjmp	__dfsub_return_op1
-+	
-+__dfsub_pack_result:
-+	/* Pack */
-+	pack_df	r7 /*exp*/, r10, r11 /* mantissa */, r10, r11 /* Output df number*/
-+
-+__dfsub_return_op1:
-+	lsl	r12,1
-+	ror	r11
-+	popm	r4-r7,pc
-+	
-+	.align	2
-+	.global __avr32_f64_add
-+	.type  __avr32_f64_add,@function
-+__avr32_f64_add:	
-+	pushm	r4-r7,lr
-+        eor     r12,r11,r9               // compare signs of operands
-+        lsl     r12,1
-+        brcc    __dfadd                 // same sign => add
-+
-+        eorh    r9,0x8000
-+        rjmp    __dfsub               // different signs => op1 - (-op2)
-+__dfadd:
-+
-+        lsl     r11,1                   // unpack op1 msw and get sign in c
-+        or      r4,r11,r10              // check if all bits zero
-+        brne    1f
-+
-+        // op1 is +/-0, and is unpacked with sign in c. add to op2.
-+        // also used by sub, but op2 has been negated in this case
-+        ror     r12                     // save sign of op1 in msb of r12
-+        lsl     r9,1                    // unpack msw and get sign of op2
-+        or      r4,r9,r8                // check all bits in op2
-+        breq    0f
-+
-+        // if op2 != 0, then return op2 unchanged.
-+        ror     r9                      // pack op2 msw again with sign from c
-+        mov     r11,r9
-+        mov     r10,r8
-+        popm    r4-r7,pc
-+
-+0:
-+        // both op1 and op2 zero, but sign unknown. result should and signs.
-+        ror     r9                      // pack op2 msw again with sign from c
-+        lsl     r12,1                   // get back sign of op1 into c ...
-+        ror     r11                     // and back in original op1
-+        and     r11,r9                  // and sign bits. as op1 is zero, the
-+                                        // only bit which can be 1 is sign bit
-+	popm	r4-r7,pc
-+1:	
-+        ror     r12                     // save op1 sign in msb of r12
-+
-+        lsl     r9,1                    // unpack op2 msw
-+        or      r4,r8,r9
-+        brne    0f
-+					   // op2 is zero, return op1
-+                                        // whatever it is. the only case
-+                                        // requiring special handling is if
-+                                        // op1 is zero, but that was handled
-+                                        // above.
-+	lsl	r12, 1
-+	ror	r11
-+	popm	r4-r7,pc
-+0:	
-+        // make sure that exp[op1] >= exp[op2]
-+        cp.w    r11,r9
-+        brhs    0f
-+
-+        mov     r7,r11                  // swap operands if op2 was larger
-+        mov     r6,r10
-+        mov     r11,r9
-+        mov     r10,r8
-+        mov     r9,r7
-+        mov     r8,r6
-+
-+0:
-+        // check if op1 is nan or inf.
-+        lddpc   r5,.Linf
-+        cp.w    r11,r5
-+        brlo    1f
-+	/* Op 1 is nan or inf */
-+        // we have to check low word as well as nan mantissa may be 0 in msw
-+        cpc     r10
-+        // we know that op1 is inf or nan. if z != 1 then we have nan.
-+        // if we have nan, return nan.
-+        breq  0f
-+	mov	r11, -1
-+	rjmp	__dfadd_return_op1			
-+0:
-+
-+        // op1 is infinity. check if op2 is nan, infinty or a normal number.
-+        cp.w    r9,r5
-+        // Op2 is NaN of Inf. Return op2 but with sign of result.
-+        // If Op2 is NaN, sign doesn't matter but no need to separate NaN
-+	movhs	r11, r9
-+	movhs	r10, r8
-+
-+        // op2 can be infinity (of the same sign as op1) or nan.
-+        // in both cases we should return nan.
-+        rjmp    __dfadd_return_op1
-+1:	
-+        // if op1 is not inf or nan, then op2 cannot be since exp[op1] >=
-+        // exp[op2]
-+
-+        // now prepare the operands by expanding them and shifting op2
-+        // to the correct position for the add. note! if op2 is
-+        // insignificant compared to op1, the function will take care of
-+        // this and return op1 directly to the application.
-+
-+	/* Unpack operands */
-+	unpack_df	r7 /* exp op1*/, r10, r11 /* Mantissa op1 */	
-+	unpack_df	r6 /* exp op2*/, r8, r9 /* Mantissa op2 */	
-+
-+	/* Get shift amount required for aligning op1 and op2 */
-+	rsub	r6, r7
-+	breq	__perform_dfadd	/* No shift needed */
-+
-+	cp.w	r6, 63
-+	brhs	__dfadd_pack_result	/* Op 2 insignificant compared to op1 */
-+
-+	/* Shift mantissa of op2 so that op1 and op2 are aligned */
-+	scale_df	r6 /* shift_count*/, r8, r9 /* Mantissa */, r4, r5 /*Scratch*/
-+
-+__perform_dfadd:	
-+        add     r10,r8                  // add mantissas
-+        adc     r11,r11,r9
-+	brcc	0f		
-+        ror     r11                     // overflow => shift down mantissa
-+        ror     r10
-+        brcc    1f                 // sticky bit shifted out?
-+        sbr     r10,0                   // if so, merge it into result again
-+1:
-+        sub     r7,-1                   // increase exponent with 1
-+0:
-+	normalize_df	r7 /*exp*/, r10, r11 /* mantissa */, r8, r9 /* scratch */
-+
-+	/* Check if a subnormal result was created */
-+	cp.w	r7, 0
-+	brgt	0f
-+	
-+	adjust_subnormal_df	r7 /*exp*/, r10, r11 /* Mantissa */, r12 /*sign*/, r8, r9 /*scratch*/			
-+	popm	r4-r7,pc
-+0:
-+	
-+        /* Round result */
-+        round_df	r7 /*exp*/, r10, r11 /* Mantissa */, r9 /*scratch*/
-+        cp.w    r7,0x7ff
-+        brlt    __dfadd_pack_result
-+	/*Return infinity */
-+	lddpc	r11, .Linf
-+	mov	r10, 0
-+	rjmp	__dfadd_return_op1
-+	
-+__dfadd_pack_result:
-+	/* Pack */
-+	pack_df	r7 /*exp*/, r10, r11 /* mantissa */, r10, r11 /* Output df number*/
-+
-+__dfadd_return_op1:
-+	lsl	r12,1
-+	ror	r11
-+	popm	r4-r7,pc
-+#endif
-+
-+#ifdef L_avr32_f64_to_u32
-+	/* This goes into L_fixdfsi */
-+#endif
-+	
-+
-+#ifdef L_avr32_f64_to_s32
-+	.global __avr32_f64_to_u32
-+	.type  __avr32_f64_to_u32,@function
-+__avr32_f64_to_u32:
-+	cp.w	r11, 0
-+	retmi	0	/* Negative returns 0 */
-+#ifdef __LARGE_FLOATS__
-+        lsl     r12,r11,1
-+        lsr     r12,21                  /* extract exponent*/
-+        sub     r12,1023                /* convert to unbiased exponent.*/
-+        retlo   0                       /* too small exponent implies zero. */
-+        cp.w    r12,32
-+        brcc    0f	
-+	rjmp	1f
-+#endif
-+
-+	/* Fallthrough to df to signed si conversion */	
-+	.global __avr32_f64_to_s32
-+	.type  __avr32_f64_to_s32,@function
-+__avr32_f64_to_s32:
-+        lsl     r12,r11,1
-+        lsr     r12,21                  /* extract exponent*/
-+        sub     r12,1023                /* convert to unbiased exponent.*/
-+        retlo   0                       /* too small exponent implies zero. */
-+
-+#ifdef __LARGE_FLOATS__
-+        cp.w    r12,31
-+        brcc    0f
-+#endif
-+1:	
-+        rsub    r12,r12,31              /* shift count = 31 - exponent */
-+        mov     r9,r11                  /* save sign for later...*/
-+        lsl     r11,11                  /* remove exponent and sign*/
-+        sbr     r11,31                  /* add implicit bit*/
-+        or      r11,r11,r10>>21         /* get rest of bits from lsw of double */
-+        lsr     r11,r11,r12             /* shift down mantissa to final place */
-+        lsl     r9,1                    /* sign -> carry */
-+        retcc   r11                     /* if positive, we are done */
-+        neg     r11                     /* if negative float, negate result */
-+        ret     r11
-+
-+#ifdef __LARGE_FLOATS__
-+0:	
-+        mov     r12,-1                  /* r11 = 0xffffffff */
-+        lsr     r12,1                   /* r11 = 0x7fffffff */
-+        lsl     r11,1                   /* sign -> carry */
-+        acr     r12                     /* r11 = signed ? 0x80000000
-+                                                        : 0x7fffffff */
-+        ret     r12
-+#endif
-+#endif	/* L_fixdfsi*/
-+
-+#ifdef L_avr32_f64_to_u64
-+	/* Actual function is in L_fixdfdi */
-+#endif
-+	
-+#ifdef L_avr32_f64_to_s64
-+	.global __avr32_f64_to_u64
-+	.type  __avr32_f64_to_u64,@function
-+__avr32_f64_to_u64:
-+	cp.w	r11,0
-+	/* Negative numbers return zero */
-+	movmi	r10, 0
-+	movmi	r11, 0
-+	retmi	r11
-+#ifdef __LARGE_FLOATS__
-+        lsl     r9,r11,1
-+        lsr     r9,21                   /* get exponent*/
-+        sub     r9,1023                 /* convert to correct range*/
-+	/* Return zero if exponent to small */
-+	movlo	r10, 0
-+	movlo	r11, 0
-+	retlo	r11
-+        cp.w    r9,64
-+        mov     r8,r11                  /* save sign for later...*/
-+        brcs    1f
-+	rjmp	2f			/* Number to large */
-+
-+#endif
-+
-+	
-+
-+	/* Fallthrough */
-+	.global __avr32_f64_to_s64
-+	.type  __avr32_f64_to_s64,@function
-+__avr32_f64_to_s64:
-+        lsl     r9,r11,1
-+        lsr     r9,21                   /* get exponent*/
-+        sub     r9,1023                 /* convert to correct range*/
-+	/* Return zero if exponent to small */
-+	movlo	r10, 0
-+	movlo	r11, 0
-+	retlo	r11
-+
-+#ifdef __LARGE_FLOATS__
-+        cp.w    r9,63
-+        mov     r8,r11                  /* save sign for later...*/
-+        brcc    2f
-+#else
-+        mov     r8,r11                  /* save sign for later...*/
-+#endif
-+1:	
-+        lsl     r11,11                  /* remove exponent */
-+        sbr     r11,31                  /* add implicit bit*/
-+        or      r11,r11,r10>>21         /* get rest of bits from lsw of double*/
-+        lsl     r10,11                  /* align lsw correctly as well */
-+        rsub    r9,r9,63                /* shift count = 63 - exponent */
-+        breq    1f
-+
-+        cp.w    r9,32                   /* is shift count more than one reg? */
-+        brhs    0f
-+
-+        mov     r12,r11                 /* save msw */
-+        lsr     r10,r10,r9              /* small shift count, shift down lsw */
-+        lsr     r11,r11,r9              /* small shift count, shift down msw */
-+        rsub    r9,r9,32                /* get 32-size of shifted out tail */
-+        lsl     r12,r12,r9              /* align part to move from msw to lsw */
-+        or      r10,r12                 /* combine to get new lsw */
-+        rjmp    1f
-+
-+0:
-+        lsr     r10,r11,r9              /* large shift count,only lsw get bits
-+                                           note that shift count is modulo 32*/
-+        mov     r11,0                   /* msw will be 0 */
-+
-+1:
-+        lsl     r8,1                    /* sign -> carry */
-+        retcc   r11                     /* if positive, we are done */
-+
-+        neg     r11                     /* if negative float, negate result */
-+        neg     r10
-+        scr     r11
-+        ret     r11
-+
-+
-+#ifdef __LARGE_FLOATS__
-+2:
-+        mov     r11,-1                  /* r11 = 0xffffffff */
-+        lsr     r11,1                   /* r11 = 0x7fffffff */
-+        lsl     r8,1                    /* sign -> carry */
-+        acr     r11                     /* r11 = signed ? 0x80000000 */
-+                                        /*              : 0x7fffffff */
-+        lsl     r10,r11,31              /* extend last bit of msw*/
-+        asr     r10,31
-+        ret     r11
-+#endif
-+#endif
-+
-+#ifdef L_avr32_u32_to_f64
-+	/* Code located in L_floatsidf */
-+#endif
-+	
-+#ifdef L_avr32_s32_to_f64
-+	.global __avr32_u32_to_f64
-+	.type  __avr32_u32_to_f64,@function
-+__avr32_u32_to_f64:
-+	sub	r11, r12, 0 /* Move to r11 and force Z flag to be updated */
-+	mov	r12, 0	    /* always positive */
-+	rjmp	0f	    /* Jump to common code for floatsidf */
-+	
-+	.global __avr32_s32_to_f64
-+	.type  __avr32_s32_to_f64,@function
-+__avr32_s32_to_f64:
-+	mov	r11, r12	/* Keep original value in r12 for sign */
-+	abs	r11		/* Absolute value if r12 */
-+0:	
-+        mov     r10,0           /* let remaining bits be zero */
-+        reteq   r11		/* zero long will return zero float */
-+
-+	pushm	lr
-+        mov     r9,31+1023              /* set exponent */
-+		
-+	normalize_df	r9 /*exp*/, r10, r11 /* mantissa */, r8, lr /* scratch */
-+
-+	/* Check if a subnormal result was created */
-+	cp.w	r9, 0
-+	brgt	0f
-+	
-+	adjust_subnormal_df	r9 /* exp */, r10, r11 /* Mantissa */, r12 /*sign*/, r8, lr /* scratch */
-+	popm	pc
-+0:
-+	
-+        /* Round result */
-+        round_df	r9 /*exp*/, r10, r11 /* Mantissa */, r8 /*scratch*/
-+        cp.w    r9,0x7ff
-+        brlt    0f
-+	/*Return infinity */
-+	lddpc	r11, .Linf
-+	mov	r10, 0
-+	rjmp	__floatsidf_return_op1
-+	
-+0:
-+
-+	/* Pack */
-+	pack_df	r9 /*exp*/, r10, r11 /* mantissa */, r10, r11 /* Output df number*/
-+__floatsidf_return_op1:	
-+        lsl     r12,1		       /* shift in sign bit */
-+        ror     r11
-+
-+	popm	pc
-+#endif
-+
-+
-+#ifdef L_avr32_f32_cmp_eq
-+	.global __avr32_f32_cmp_eq
-+	.type  __avr32_f32_cmp_eq,@function
-+__avr32_f32_cmp_eq:	
-+	cp.w	r12, r11
-+	brne	0f	/* If not equal check for +/-0 */
-+	
-+	/* Check for NaN or Inf */
-+        lddpc   r11,.Linf_sf
-+	lsl	r12, 1
-+	cp.w	r12, r11
-+	srls	r12	/* 0 if NaN, 1 otherwise */
-+	ret	r12	
-+0:	
-+	/* Or together the two values and shift out the sign bit.
-+	   If the result is zero, then the two values are both zero. */
-+	or	r12, r11
-+	lsl	r12, 1
-+	sreq	r12
-+	ret	r12
-+#endif
-+	
-+#if defined(L_avr32_f32_cmp_ge) || defined(L_avr32_f32_cmp_lt)
-+#ifdef L_avr32_f32_cmp_ge
-+	.global __avr32_f32_cmp_ge
-+	.type  __avr32_f32_cmp_ge,@function
-+__avr32_f32_cmp_ge:
-+#endif	
-+#ifdef L_avr32_f32_cmp_lt
-+	.global __avr32_f32_cmp_lt
-+	.type  __avr32_f32_cmp_lt,@function
-+__avr32_f32_cmp_lt:
-+#endif	
-+	lsl	r10, r12, 1	/* Remove sign bits */
-+	lsl	r9, r11, 1
-+	lddpc	r8, .Linf_sf
-+	cp.w	r10, r8
-+	rethi	0		/* Op0 is NaN */		
-+	cp.w	r9, r8
-+	rethi	0		/* Op1 is Nan */
-+
-+	eor	r8, r11, r12
-+	bld	r12, 31
-+#ifdef L_avr32_f32_cmp_ge
-+	srcc	r8	/* Set result to true if op0 is positive*/
-+#endif
-+#ifdef L_avr32_f32_cmp_lt
-+	srcs	r8	/* Set result to true if op0 is negative*/
-+#endif
-+	retmi	r8	/* Return if signs are different */
-+	brcs	0f	/* Both signs negative? */
-+
-+	/* Both signs positive */
-+	cp.w	r12, r11
-+#ifdef L_avr32_f32_cmp_ge
-+	srhs	r12
-+#endif
-+#ifdef L_avr32_f32_cmp_lt
-+	srlo	r12
-+#endif
-+	retal	r12
-+0:
-+	/* Both signs negative */
-+	cp.w	r11, r12
-+#ifdef L_avr32_f32_cmp_ge
-+	srhs	r12
-+#endif
-+#ifdef L_avr32_f32_cmp_lt
-+	srlo	r12
-+#endif
-+	retal	r12
-+#endif
-+	
-+
-+#ifdef L_avr32_f64_cmp_eq
-+	.global __avr32_f64_cmp_eq
-+	.type  __avr32_f64_cmp_eq,@function
-+__avr32_f64_cmp_eq:	
-+        cp.w    r10,r8
-+        cpc     r11,r9
-+        brne    0f	/* Both args could be zero with different sign bits */
-+
-+        /* check for NaN */
-+        lsl     r11,1
-+        lddpc   r12,.Linf
-+        cp.w    r10,0
-+        cpc     r11,r12                 /* check if nan or inf */
-+	srls	r12			/* If Arg is NaN return 0 else 1*/
-+	ret	r12			/* Return  */
-+
-+0:
-+        lsl     r11,1                   /* get rid of sign bits */
-+        lsl     r9,1
-+        or      r11,r10                 /* Check if all bits are zero */
-+        or      r11,r9
-+        or      r11,r8
-+	sreq	r12			/* If all zeros the arguments are equal
-+					   so return 1 else return 0 */
-+	ret	r12
-+#endif
-+
-+
-+#if   defined(L_avr32_f64_cmp_ge) || defined(L_avr32_f64_cmp_lt)
-+
-+#ifdef L_avr32_f64_cmp_ge
-+	.global __avr32_f64_cmp_ge
-+	.type  __avr32_f64_cmp_ge,@function
-+__avr32_f64_cmp_ge:
-+#endif	
-+#ifdef L_avr32_f64_cmp_lt
-+	.global __avr32_f64_cmp_lt
-+	.type  __avr32_f64_cmp_lt,@function
-+__avr32_f64_cmp_lt:
-+#endif	
-+
-+        /* compare magnitude of op1 and op2 */
-+	pushm	lr
-+	
-+        lsl     r11,1                   /* Remove sign bit of op1 */
-+	srcs	lr			/* Sign op1 to lsb of lr*/
-+        lsl     r9,1                    /* Remove sign bit of op2 */
-+	rol	lr			/* Sign op2 to lsb of lr, sign bit op1 bit 1 of lr*/
-+
-+	/* Check for Nan */
-+        lddpc   r12,.Linf
-+        cp.w    r10,0
-+        cpc     r11,r12
-+	movhi	r12, 0	/* Return false for NaN */
-+        brhi    0f	/* We have NaN */
-+        cp.w    r8,0
-+        cpc     r9,r12
-+	movhi	r12, 0	/* Return false for NaN */
-+        brhi    0f	/* We have NaN */
-+
-+        cp.w    lr,3                   /* both operands negative ?*/	
-+        breq    1f
-+
-+        cp.w    lr,1                   /* both operands positive? */
-+        brlo    2f
-+
-+        /* Different signs. If sign of op1 is negative the difference
-+	   between op1 and op2 will always be negative, and if op1 is
-+	   positive the difference will always be positive */		
-+#ifdef L_avr32_f64_cmp_ge
-+	sreq	r12
-+#endif
-+#ifdef L_avr32_f64_cmp_lt
-+	srne	r12
-+#endif
-+	popm	pc
-+
-+
-+2:
-+        /* Both operands positive. Just compute the difference */
-+        cp.w    r10,r8
-+        cpc     r11,r9
-+#ifdef L_avr32_f64_cmp_ge
-+	srhs	r12
-+#endif
-+#ifdef L_avr32_f64_cmp_lt
-+	srlo	r12
-+#endif
-+	popm	pc
-+		
-+1:
-+        /* Both operands negative. Compute the difference with operands switched */
-+        cp     r8,r10
-+        cpc    r9,r11
-+#ifdef L_avr32_f64_cmp_ge
-+	srhs	r12
-+#endif
-+#ifdef L_avr32_f64_cmp_lt
-+	srlo	r12
-+#endif
-+0:	
-+	popm	pc
-+#endif
-+
-+	
-+
-+#ifdef L_avr32_f64_div
-+	.global __avr32_f64_div
-+	.type  __avr32_f64_div,@function
-+__avr32_f64_div:
-+	stm	--sp, r2-r7,lr
-+	eor	r12, r11, r9		/* Sign(op1) ^ Sign(op2) to msb of r12*/
-+        lsl     r11,1                   /* unpack op1*/
-+        lddpc   lr,.Linf
-+        lsl     r9,1                    /* unpack op2*/
-+
-+	cp.w    r11,lr
-+        brhs	0f			/* op1 is NaN or infinity */
-+        cp.w    r9,lr
-+        brhs    1f			/* op2 is NaN or infinity */
-+        or      r5,r9,r8
-+        breq    2f			/* op2 is zero */
-+        or      r5,r11,r10
-+        breq    __dfdiv_return_op1	/* op1 is zero return zero*/
-+
-+	/* Unpack and normalize */
-+	/* op1 */
-+	unpack_df	r7 /*exp*/, r10, r11 /*df number*/
-+	normalize_df	r7 /*exp*/, r10, r11 /*Mantissa*/, r4, r5 /*scratch*/
-+
-+	/* op1 */
-+	unpack_df	r6 /*exp*/, r8, r9 /*df number*/
-+	normalize_df	r6 /*exp*/, r8, r9 /*Mantissa*/, r4, r5 /*scratch*/
-+
-+	/* Compute new exponent */
-+        sub     r7,r6
-+        sub     r7,-1023
-+
-+	/* Do fixed point division of mantissas*/
-+        mov     r6,55
-+        lsr     r11,1
-+        ror     r10
-+        lsr     r9,1
-+        ror     r8
-+
-+3:
-+	/* Check if dividend is higher or same than divisor */
-+        sub     r2,r10,r8
-+        sbc     r3,r11,r9
-+	/* If so move the difference back into the dividend */
-+	movhs	r10, r2
-+	movhs	r11, r3
-+	/* Update the Quotient */
-+        rol     r4
-+        rol     r5
-+        eorl    r4,1
-+
-+	/* Shift the dividend */
-+        lsl     r10,1
-+        rol     r11
-+
-+        sub     r6,1
-+	brne    3b
-+
-+	/* Check if we have a remainder which will the propagate into
-+	   the last bit */
-+
-+        or      r11,r11,r10
-+        neg     r11
-+        rol     r4
-+        rol     r5
-+
-+	/* Adjust mantissa into correct alignment */
-+        lsl     r11, r5,(64-56)
-+        or      r11,r11,r4>>(32-64+56)
-+        lsl     r10,r4, (64-56)
-+
-+	/* Normalize result */
-+	normalize_df	r7 /*exp*/, r10, r11 /* mantissa */, r8, r9 /* scratch */
-+
-+	/* Check if a subnormal result was created */
-+	cp.w	r7, 0
-+	brgt	3f
-+	
-+	adjust_subnormal_df	r7 /*exp*/, r10, r11 /* Mantissa */, r12 /*sign*/, r8, r9 /*scratch*/			
-+	ldm	sp++, r2-r7,pc
-+3:
-+	
-+        /* Round result */
-+        round_df	r7 /*exp*/, r10, r11 /* Mantissa */, r9 /*scratch*/
-+        cp.w    r7,0x7ff
-+        brlt    __dfdiv_pack_result
-+	/*Return infinity */
-+	lddpc	r11, .Linf
-+	mov	r10, 0
-+	rjmp	__dfdiv_return_op1
-+	
-+__dfdiv_pack_result:
-+	/* Pack */
-+	pack_df	r7 /*exp*/, r10, r11 /* mantissa */, r10, r11 /* Output df number*/
-+
-+__dfdiv_return_op1:
-+	lsl	r12,1
-+	ror	r11
-+	ldm	sp++, r2-r7,pc
-+
-+0:
-+	/* Op1 is NaN or Inf */
-+        cpc     r10
-+	/* If op1 is a NaN the we should return a NaN */
-+        brne    __dfdiv_return_op1
-+
-+	/* Op1 is infinity, check op2*/
-+        cp.w    r9,lr
-+        brlo    __dfdiv_return_op1    /* Op2 is a normal number return inf */
-+	/* Other combinations:	 return NaN */
-+	mov	r11, -1
-+	ldm	sp++, r2-r7,pc
-+
-+1:	
-+	/* Op2 is NaN or Inf */
-+        cpc     r8
-+	/* If inf return zero else return NaN*/
-+	mov	r10, 0
-+	moveq	r11, 0
-+	movne	r11, -1
-+	ldm	sp++, r2-r7,pc
-+
-+2:
-+	/* Op2 is zero */
-+        or      r6,r11,r10              /* 0.0/0.0 yields NaN */
-+	mov	r10, 0
-+	moveq	r11, -1			/* Return NaN */
-+	movne	r11, lr			/* Return inf */
-+        rjmp    __dfdiv_return_op1
-+
-+#endif	
-+		
-+
-+#ifdef L_avr32_f32_div
-+	.global __avr32_f32_div
-+	.type  __avr32_f32_div,@function
-+__avr32_f32_div:
-+	eor	r8, r11, r12		/* MSB(r8) = Sign(op1) ^ Sign(op2) */
-+	/* Unpack */
-+        lsl     r12,1
-+	reteq	0			/* Return zero if op1 is zero */
-+        lddpc   r9, .Linf_sf
-+        lsl     r11,1
-+
-+	/* Check op1 for NaN or Inf */
-+        cp      r12,r9	
-+        brhs    2f
-+
-+	/* Check op2 for NaN or Inf */
-+        cp      r11,r9
-+        brhs    3f
-+	/* Check op2 for zero */
-+        tst     r11,r11
-+        breq    4f
-+
-+	/* If op1 is zero return zero */
-+	tst	r12, r12
-+	reteq	0
-+	
-+	/* Unpack op1*/	
-+	unpack_sf	r9 /*exp*/, r12 /*sf*/
-+
-+	/* Unpack op2*/	
-+	unpack_sf	r10 /*exp*/, r11 /*sf*/
-+
-+	/* Calculate new exponent */
-+	stm	--sp,r7,lr
-+	sub	r9, r10
-+        sub     r9,-127
-+
-+	/* Divide */
-+        mov     r7,26
-+
-+        lsr     r12,1                   /* Make room for one more bit in mantissas */
-+        lsr     r11,1
-+
-+0:
-+        sub     r10,r12,r11
-+	movcc	r12, r10		/* update dividend if divisor smaller */
-+        rol     lr                      /* shift result into lr */
-+        eorl    lr,1                    /* flip bit. */
-+        lsl     r12,1			/* Shift dividend */
-+        sub     r7,1
-+        brne    0b
-+
-+        /* round and scale*/
-+        neg	r12                     /* c = 1 iff r12 != 0 */
-+        rol     lr
-+        lsl     r10,lr,(32-27)		/* Adjust mantissa */
-+	ldm	sp++, r7, lr
-+	
-+				
-+	normalize_sf	r9 /*exp*/, r10 /*mant*/, r11 /*scratch*/	
-+
-+	/* Check for subnormal result */
-+	cp.w	r9, 0
-+	brgt	0f
-+
-+	/* Adjust a subnormal result */
-+	adjust_subnormal_sf	r12 /*sf*/, r9 /*exp*/, r10 /*mant*/, r8 /*sign*/,r11 /*scratch*/
-+	ret	r12
-+0:
-+	round_sf	r9 /*exp*/, r10 /*mant*/, r11 /*scratch*/	
-+	pack_sf		r12 /*sf*/, r9 /*exp*/, r10 /*mant*/
-+__divsf_return_op1:	
-+	lsl	r8, 1
-+	ror	r12
-+	ret	r12
-+
-+2:
-+	/* Op1 is NaN or inf */
-+	retne	-1	/* Return NaN if op1 is NaN */
-+	/* Op1 is inf check op2 */
-+	cp	r11, r9
-+	brlo	__divsf_return_op1 /* inf/number gives inf */
-+	ret	-1	/* The rest gives NaN*/
-+3:	
-+	/* Op1 is NaN or inf */
-+	reteq	0	/* Return zero if number/inf*/
-+	ret	-1	/* Return NaN*/
-+4:
-+	/* Op2 is zero ? */
-+	tst	r12,r12
-+	reteq	-1	/* 0.0/0.0 is NaN */
-+	lddpc	r12, .Linf_sf
-+	rjmp	__divsf_return_op1
-+				
-+#endif
-+
-+#ifdef L_avr32_f32_mul
-+	.global __avr32_f32_mul
-+	.type  __avr32_f32_mul,@function
-+__avr32_f32_mul:
-+	eor	r8, r11, r12		/* MSB(r8) = Sign(op1) ^ Sign(op2) */
-+        lsl     r12,1                   /* unpack op1 */
-+        lsl     r11,1                   /* unpack op2 */
-+
-+        /* arrange operands so that that op1 >= op2 */
-+        sub     r9,r12,r11
-+        brcc    0f
-+
-+        sub     r12,r9                  /* swap operands if op2 was larger */
-+        add     r11,r9
-+
-+0:
-+        lddpc   r9,.Linf_sf
-+        cp      r12,r9
-+        brhs    2f
-+
-+	/* Check op2 for zero */
-+        tst     r11,r11
-+	reteq	0	/* Return zero */
-+
-+	/* Unpack op1 */	
-+	unpack_sf	r9 /*exp*/, r12 /*sf*/
-+	/* Unpack op2 */	
-+	unpack_sf	r10 /*exp*/, r11 /*sf*/
-+
-+	/* Calculate new exponent */
-+        add     r9,r10
-+
-+	/* Do the multiplication */
-+        mulu.d  r10,r12,r11
-+
-+        sub     r9,(127-1)              /* remove extra exponent bias */
-+
-+	/* Check if we have any bits in r10 which
-+	   means a rounding bit should be inserted in LSB of result */
-+        tst     r10,r10
-+        srne    r10
-+        or      r12,r11,r10
-+
-+	/* Normalize */
-+	normalize_sf	r9 /*exp*/, r12 /*mant*/, r11 /*scratch*/	
-+
-+	/* Check for subnormal result */
-+	cp.w	r9, 0
-+	brgt	0f
-+
-+	/* Adjust a subnormal result */
-+	adjust_subnormal_sf	r12/*sf*/, r9 /*exp*/, r12 /*mant*/, r8 /*sign*/, r11 /*scratch */
-+	ret	r12
-+0:
-+	round_sf	r9 /*exp*/, r12 /*mant*/, r11 /*scratch*/	
-+	cp.w		r9, 0xff
-+	brlo		1f
-+        lddpc		r12,.Linf_sf 	
-+	rjmp		__mulsf_return_op1
-+1:			
-+	pack_sf		r12 /*sf*/, r9 /*exp*/, r12 /*mant*/
-+__mulsf_return_op1:	
-+	lsl	r8, 1
-+	ror	r12
-+	ret	r12
-+
-+2:
-+	/* Op1 is inf or NaN */
-+        retne   -1             /* Op1 is NaN return NaN */
-+
-+	/* Op1 is inf and op2 is smaller so it is either infinity
-+	   or a subnormal number */
-+        cp      r11,0
-+        brne    __mulsf_return_op1  /* op2 is not zero. return op1.*/
-+        ret     -1		    /* inf * 0  return NaN */		
-+#endif	
-+
-+	
-+#ifdef L_avr32_s32_to_f32
-+	.global __avr32_s32_to_f32
-+	.type  __avr32_s32_to_f32,@function
-+__avr32_s32_to_f32:
-+	cp	r12, 0
-+	reteq	r12	/* If zero then return zero float */
-+	mov	r11, r12 /* Keep the sign */
-+	abs	r12	/* Compute the absolute value */
-+	mov	r10, 31 + 127	/* Set the correct exponent */
-+	
-+	/* Normalize */
-+	normalize_sf	r10 /*exp*/, r12 /*mant*/, r9 /*scratch*/	
-+
-+	/* Check for subnormal result */
-+	cp.w	r10, 0
-+	brgt	0f
-+
-+	/* Adjust a subnormal result */
-+	adjust_subnormal_sf	r12/*sf*/, r10 /*exp*/, r12 /*mant*/, r11/*sign*/, r9 /*scratch*/
-+	ret	r12
-+0:
-+	round_sf	r10 /*exp*/, r12 /*mant*/, r9 /*scratch*/	
-+	pack_sf		r12 /*sf*/, r10 /*exp*/, r12 /*mant*/
-+__floatsisf_return_op1:	
-+	lsl	r11, 1
-+	ror	r12
-+	ret	r12		
-+#endif
-+
-+#ifdef L_avr32_u32_to_f32
-+	.global __avr32_u32_to_f32
-+	.type  __avr32_u32_to_f32,@function
-+__avr32_u32_to_f32:
-+	cp	r12, 0
-+	reteq	r12	/* If zero then return zero float */
-+	mov	r10, 31 + 127	/* Set the correct exponent */
-+	
-+	/* Normalize */
-+	normalize_sf	r10 /*exp*/, r12 /*mant*/, r9 /*scratch*/	
-+
-+	/* Check for subnormal result */
-+	cp.w	r10, 0
-+	brgt	0f
-+
-+	/* Adjust a subnormal result */
-+	mov	r8, 0
-+	adjust_subnormal_sf	r12/*sf*/,r10 /*exp*/, r12 /*mant*/,r8/*sign*/, r9 /*scratch*/
-+	ret	r12
-+0:
-+	round_sf	r10 /*exp*/, r12 /*mant*/, r9 /*scratch*/	
-+	pack_sf		r12 /*sf*/, r10 /*exp*/, r12 /*mant*/
-+__floatunsisf_return_op1:	
-+	lsr	r12,1	/* Sign bit is 0 for unsigned int */
-+	ret	r12		
-+#endif
-+	
-+
-+#ifdef L_avr32_f32_to_s32
-+	.global __avr32_f32_to_s32
-+	.type  __avr32_f32_to_s32,@function
-+__avr32_f32_to_s32:
-+        lsr     r11,r12,23              /* Extract exponent */
-+        castu.b r11
-+        sub     r11,127                 /* Fix bias */
-+        retlo   0			/* Negative exponent yields zero integer */
-+
-+#ifdef __IEEE_LARGE_FLOATS__
-+        cp      r11,31
-+        brcc    0f
-+#endif
-+	/* Shift mantissa into correct position */
-+        rsub    r11,r11,31	/* Shift amount */
-+        lsl     r10,r12,8       /* Get mantissa */
-+        sbr     r10,31          /* Add implicit bit */
-+        lsr     r10,r10,r11     /* Perform shift */
-+        lsl     r12,1           /* Check sign */
-+        retcc   r10             /* if positive, we are done */
-+        neg     r10             /* if negative float, negate result */
-+        ret     r10
-+
-+#ifdef __IEEE_LARGE_FLOATS__
-+0:	
-+        mov     r11,-1
-+        lsr     r11,1
-+        lsl     r12,1
-+        acr     r11
-+
-+        ret     r11
-+#endif
-+#endif	
-+	
-+#ifdef L_avr32_f32_to_u32
-+	.global __avr32_f32_to_u32
-+	.type  __avr32_f32_to_u32,@function
-+__avr32_f32_to_u32:
-+	cp	r12,0
-+	retmi	0			/* Negative numbers gives 0 */
-+        bfextu  r11, r12, 23, 8		/* Extract exponent */
-+        sub     r11,127                 /* Fix bias */
-+        retlo   0			/* Negative exponent yields zero integer */
-+
-+#ifdef __IEEE_LARGE_FLOATS__
-+        cp      r11,32
-+        brcc    0f
-+#endif
-+	/* Shift mantissa into correct position */
-+        rsub    r11,r11,31	/* Shift amount */
-+        lsl     r12,8           /* Get mantissa */
-+        sbr     r12,31          /* Add implicit bit */
-+        lsr     r12,r12,r11     /* Perform shift */
-+        ret	r12
-+
-+#ifdef __IEEE_LARGE_FLOATS__
-+0:	
-+        mov     r11,-1
-+        lsr     r11,1
-+        lsl     r12,1
-+        acr     r11
-+
-+        ret     r11
-+#endif
-+#endif	
-+
-+#ifdef L_avr32_f32_to_f64
-+	.global __avr32_f32_to_f64
-+	.type  __avr32_f32_to_f64,@function
-+
-+__avr32_f32_to_f64:
-+        lsl     r11,r12,1               /* Remove sign bit, keep original value in r12*/
-+	moveq	r10, 0
-+	reteq	r11			/* Return zero if input is zero */
-+
-+	bfextu  r9,r11,24,8              /* Get exponent */
-+        cp.w    r9,0xff                 /* check for NaN or inf */
-+        breq    0f
-+
-+        lsl     r11,7                   /* Convert sf mantissa to df format */
-+        mov     r10,0
-+
-+	/* Check if implicit bit should be set */
-+        cp.w    r9, 0
-+        subeq   r9,-1                    /* Adjust exponent if it was 0 */
-+	srne	r8
-+	or	r11, r11, r8 << 31	/* Set implicit bit if needed */
-+        sub     r9,(127-0x3ff)          /* Convert exponent to df format exponent */
-+
-+	pushm	lr
-+	normalize_df	r9 /*exp*/, r10, r11 /*mantissa*/, r8, lr /*scratch*/
-+	popm	lr
-+	pack_df		r9 /*exp*/, r10, r11 /*mantissa*/, r10, r11 /*df*/
-+
-+__extendsfdf_return_op1:	
-+	/* Rotate in sign bit */
-+	lsl	r12, 1
-+	ror	r11
-+	ret	r11
-+			
-+0:
-+	/* Inf or NaN*/
-+	lddpc	r10, .Linf
-+        lsl     r11,8                   /* check mantissa */
-+	movne	r11, -1			/* Return NaN */
-+	moveq	r11, r10		/* Return inf */
-+	rjmp	__extendsfdf_return_op1
-+#endif			
-+
-+
-+#ifdef L_avr32_f64_to_f32
-+	.global __avr32_f64_to_f32
-+	.type  __avr32_f64_to_f32,@function
-+
-+__avr32_f64_to_f32:
-+	/* Unpack */
-+        lsl     r9,r11,1                /* Unpack exponent */
-+        lsr     r9,21
-+
-+	reteq	0			/* If exponent is 0 the number is so small
-+					   that the conversion to single float gives
-+					   zero */
-+
-+        lsl     r8,r11,10                  /* Adjust mantissa */
-+        or      r12,r8,r10>>22
-+
-+        lsl     r10,10                  /* Check if there are any remaining bits
-+					   in the low part of the mantissa.*/
-+        neg     r10
-+        rol     r12                     /* If there were remaining bits then set lsb
-+					   of mantissa to 1 */
-+
-+        cp      r9,0x7ff
-+        breq    2f			/* Check for NaN or inf */
-+
-+        sub     r9,(0x3ff-127)          /* Adjust bias of exponent */
-+        sbr     r12,31                  /* set the implicit bit.*/
-+
-+	cp.w	r9, 0			/* Check for subnormal number */
-+	brgt	0f
-+
-+	/* Adjust a subnormal result */
-+	adjust_subnormal_sf	r12/*sf*/,r9 /*exp*/, r12 /*mant*/, r11/*sign*/, r10 /*scratch*/
-+	ret	r12
-+0:
-+	round_sf	r9 /*exp*/, r12 /*mant*/, r10 /*scratch*/	
-+	pack_sf		r12 /*sf*/, r9 /*exp*/, r12 /*mant*/
-+__truncdfsf_return_op1:	
-+	/* Rotate in sign bit */
-+	lsl	r11, 1
-+	ror	r12
-+	ret	r12		
-+	
-+	
-+2:
-+	/* NaN or inf */
-+        cbr     r12,31                  /* clear implicit bit */
-+        retne   -1                      /* Return NaN if mantissa not zero */
-+	lddpc	r12,.Linf_sf
-+	ret	r12			/* Return inf */
-+#endif
-+
-+	
-+	.align 2
-+.Linf:	
-+	.long	0xffe00000
-+
-+	.align 2
-+.Linf_sf:	
-+	.long	0xff000000
-+
---- /dev/null
-+++ b/gcc/config/avr32/lib2funcs.S
-@@ -0,0 +1,21 @@
-+	.align	4
-+	.global __nonlocal_goto
-+	.type  __nonlocal_goto,@function
-+
-+/* __nonlocal_goto:	This function handles nonlocal_goto's in gcc.
-+
-+	parameter 0 (r12) = New Frame Pointer
-+	parameter 1 (r11) = Address to goto
-+	parameter 2 (r10) = New Stack Pointer
-+
-+	This function invalidates the return stack, since it returns from a
-+	function without using a return instruction.
-+*/
-+__nonlocal_goto:
-+	mov	r7, r12
-+	mov	sp, r10
-+	frs			# Flush return stack
-+	mov	pc, r11
-+
-+
-+		
---- /dev/null
-+++ b/gcc/config/avr32/linux-elf.h
-@@ -0,0 +1,154 @@
-+/*
-+   Linux/Elf specific definitions.
-+   Copyright 2003-2006 Atmel Corporation.
-+
-+   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+   and Håvard Skinnemoen, Atmel Norway, <hskinnemoen@atmel.com>
-+
-+   This file is part of GCC.
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+
-+
-+/* elfos.h should have already been included.  Now just override
-+   any conflicting definitions and add any extras.  */
-+
-+/* Run-time Target Specification.  */
-+#undef  TARGET_VERSION
-+#define TARGET_VERSION  fputs (" (AVR32 GNU/Linux with ELF)", stderr);
-+
-+/* Do not assume anything about header files.  */
-+#define NO_IMPLICIT_EXTERN_C
-+
-+/* The GNU C++ standard library requires that these macros be defined.  */
-+#undef CPLUSPLUS_CPP_SPEC
-+#define CPLUSPLUS_CPP_SPEC "-D_GNU_SOURCE %(cpp)"
-+
-+/* Now we define the strings used to build the spec file.  */
-+#undef  LIB_SPEC
-+#define LIB_SPEC \
-+  "%{pthread:-lpthread} \
-+   %{shared:-lc} \
-+   %{!shared:%{profile:-lc_p}%{!profile:-lc}}"
-+
-+/* Provide a STARTFILE_SPEC appropriate for GNU/Linux.  Here we add
-+   the GNU/Linux magical crtbegin.o file (see crtstuff.c) which
-+   provides part of the support for getting C++ file-scope static
-+   object constructed before entering `main'.  */
-+
-+#undef  STARTFILE_SPEC
-+#define STARTFILE_SPEC \
-+  "%{!shared: \
-+     %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} \
-+		       %{!p:%{profile:gcrt1.o%s} \
-+			 %{!profile:crt1.o%s}}}} \
-+   crti.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}"
-+
-+/* Provide a ENDFILE_SPEC appropriate for GNU/Linux.  Here we tack on
-+   the GNU/Linux magical crtend.o file (see crtstuff.c) which
-+   provides part of the support for getting C++ file-scope static
-+   object constructed before entering `main', followed by a normal
-+   GNU/Linux "finalizer" file, `crtn.o'.  */
-+
-+#undef  ENDFILE_SPEC
-+#define ENDFILE_SPEC \
-+  "%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s"
-+
-+#undef ASM_SPEC
-+#define ASM_SPEC "%{!mno-pic:--pic} %{mrelax|O*:%{mno-relax|O0|O1: ;:--linkrelax}} %{mcpu=*:-mcpu=%*}"
-+
-+#undef  LINK_SPEC
-+#define LINK_SPEC "%{version:-v} \
-+   %{static:-Bstatic} \
-+   %{shared:-shared} \
-+   %{symbolic:-Bsymbolic} \
-+   %{rdynamic:-export-dynamic} \
-+   %{!dynamic-linker:-dynamic-linker /lib/ld-uClibc.so.0} \
-+   %{mrelax|O*:%{mno-relax|O0|O1: ;:--relax}}"
-+
-+#define TARGET_OS_CPP_BUILTINS() LINUX_TARGET_OS_CPP_BUILTINS()
-+
-+/* This is how we tell the assembler that two symbols have the same value.  */
-+#define ASM_OUTPUT_DEF(FILE, NAME1, NAME2) \
-+  do					   \
-+    {					   \
-+      assemble_name (FILE, NAME1); 	   \
-+      fputs (" = ", FILE);		   \
-+      assemble_name (FILE, NAME2);	   \
-+      fputc ('\n', FILE);		   \
-+    }					   \
-+  while (0)
-+
-+
-+
-+#undef  CC1_SPEC
-+#define CC1_SPEC "%{profile:-p}"
-+
-+/* Target CPU builtins.  */
-+#define TARGET_CPU_CPP_BUILTINS()				\
-+  do								\
-+    {								\
-+      builtin_define ("__avr32__");				\
-+      builtin_define ("__AVR32__");				\
-+      builtin_define ("__AVR32_LINUX__");			\
-+      builtin_define (avr32_part->macro);			\
-+      builtin_define (avr32_arch->macro);			\
-+      if (avr32_arch->uarch_type == UARCH_TYPE_AVR32A)		\
-+	builtin_define ("__AVR32_AVR32A__");			\
-+      else							\
-+	builtin_define ("__AVR32_AVR32B__");			\
-+      if (TARGET_UNALIGNED_WORD)				\
-+	builtin_define ("__AVR32_HAS_UNALIGNED_WORD__");	\
-+      if (TARGET_SIMD)						\
-+	builtin_define ("__AVR32_HAS_SIMD__");			\
-+      if (TARGET_DSP)						\
-+	builtin_define ("__AVR32_HAS_DSP__");			\
-+      if (TARGET_RMW)						\
-+	builtin_define ("__AVR32_HAS_RMW__");			\
-+      if (TARGET_BRANCH_PRED)					\
-+	builtin_define ("__AVR32_HAS_BRANCH_PRED__");		\
-+      if (flag_pic)						\
-+	{							\
-+	  builtin_define ("__PIC__");				\
-+	  builtin_define ("__pic__");				\
-+	}							\
-+    }								\
-+  while (0)
-+
-+
-+
-+/* Call the function profiler with a given profile label.  */
-+#undef  FUNCTION_PROFILER
-+#define FUNCTION_PROFILER(STREAM, LABELNO)				\
-+  do									\
-+    {									\
-+      fprintf (STREAM, "\tmov\tlr, lo(mcount)\n\torh\tlr, hi(mcount)\n"); \
-+      fprintf (STREAM, "\ticall lr\n");					\
-+    }									\
-+  while (0)
-+
-+#define NO_PROFILE_COUNTERS 1
-+
-+/* For dynamic libraries to work */
-+/* #define PLT_REG_CALL_CLOBBERED 1 */
-+#define AVR32_ALWAYS_PIC 1
-+
-+/* uclibc does not implement sinf, cosf etc. */
-+#undef TARGET_C99_FUNCTIONS
-+#define TARGET_C99_FUNCTIONS 0
-+
-+#define LINK_GCC_C_SEQUENCE_SPEC \
-+  "%{static:--start-group} %G %L %{static:--end-group}%{!static:%G}"
---- /dev/null
-+++ b/gcc/config/avr32/predicates.md
-@@ -0,0 +1,303 @@
-+;;   AVR32 predicates file.
-+;;   Copyright 2003-2006 Atmel Corporation.
-+;;
-+;;   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+;;
-+;;   This file is part of GCC.
-+;;
-+;;   This program is free software; you can redistribute it and/or modify
-+;;   it under the terms of the GNU General Public License as published by
-+;;   the Free Software Foundation; either version 2 of the License, or
-+;;   (at your option) any later version.
-+;;
-+;;   This program is distributed in the hope that it will be useful,
-+;;   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;;   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+;;   GNU General Public License for more details.
-+;;
-+;;   You should have received a copy of the GNU General Public License
-+;;   along with this program; if not, write to the Free Software
-+;;   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+
-+;; True if the operand is a memory reference which contains an
-+;; Address consisting of a single pointer register
-+(define_predicate "avr32_indirect_register_operand"
-+  (and (match_code "mem")
-+       (match_test "register_operand(XEXP(op, 0), SImode)")))
-+
-+
-+
-+;; Address expression with a base pointer offset with
-+;; a register displacement
-+(define_predicate "avr32_indexed_memory_operand"
-+  (and (match_code "mem")
-+       (match_test "GET_CODE(XEXP(op, 0)) == PLUS"))
-+  {
-+
-+   rtx op0 = XEXP(XEXP(op, 0), 0);
-+   rtx op1 = XEXP(XEXP(op, 0), 1);
-+
-+   return ((avr32_address_register_rtx_p (op0, 0)
-+            && avr32_legitimate_index_p (GET_MODE(op), op1, 0))
-+	   || (avr32_address_register_rtx_p (op1, 0)
-+            && avr32_legitimate_index_p (GET_MODE(op), op0, 0)));
-+
-+ })
-+
-+;; Operand suitable for the ld.sb instruction
-+(define_predicate "load_sb_memory_operand"
-+  (ior (match_operand 0 "avr32_indirect_register_operand")
-+       (match_operand 0 "avr32_indexed_memory_operand")))
-+
-+
-+;; Operand suitable as operand to insns sign extending QI values
-+(define_predicate "extendqi_operand"
-+  (ior (match_operand 0 "load_sb_memory_operand")
-+       (match_operand 0 "register_operand")))
-+
-+(define_predicate "post_inc_memory_operand"
-+  (and (match_code "mem")
-+       (match_test "(GET_CODE(XEXP(op, 0)) == POST_INC)
-+                     && REG_P(XEXP(XEXP(op, 0), 0))")))
-+
-+;; Operand suitable for loading TImode values
-+(define_predicate "loadti_operand"
-+  (ior (ior (match_operand 0 "register_operand")
-+            (match_operand 0 "avr32_indirect_register_operand"))
-+       (match_operand 0 "post_inc_memory_operand")))
-+
-+;; Operand suitable for add instructions
-+(define_predicate "avr32_add_operand"
-+  (ior (match_operand 0 "register_operand")
-+       (and (match_operand 0 "immediate_operand")
-+            (match_test "CONST_OK_FOR_CONSTRAINT_P(INTVAL(op), 'I', \"Is21\")"))))
-+
-+;; Operand is a power of two immediate
-+(define_predicate "power_of_two_operand"
-+  (match_code "const_int")
-+{
-+  HOST_WIDE_INT value = INTVAL (op);
-+
-+  return value != 0 && (value & (value - 1)) == 0;
-+})
-+
-+;; Operand is a multiple of 8 immediate
-+(define_predicate "multiple_of_8_operand"
-+  (match_code "const_int")
-+{
-+  HOST_WIDE_INT value = INTVAL (op);
-+
-+  return (value & 0x7) == 0 ;
-+})
-+
-+;; Operand is a multiple of 16 immediate
-+(define_predicate "multiple_of_16_operand"
-+  (match_code "const_int")
-+{
-+  HOST_WIDE_INT value = INTVAL (op);
-+
-+  return (value & 0xf) == 0 ;
-+})
-+
-+;; Operand is a mask used for masking away upper bits of a reg
-+(define_predicate "avr32_mask_upper_bits_operand"
-+  (match_code "const_int")
-+{
-+  HOST_WIDE_INT value = INTVAL (op) + 1;
-+
-+  return value != 1 && value != 0 && (value & (value - 1)) == 0;
-+})
-+
-+
-+;; Operand suitable for mul instructions
-+(define_predicate "avr32_mul_operand"
-+  (ior (match_operand 0 "register_operand")
-+       (and (match_operand 0 "immediate_operand")
-+            (match_test "CONST_OK_FOR_CONSTRAINT_P(INTVAL(op), 'K', \"Ks08\")"))))
-+
-+;; True for logical binary operators.
-+(define_predicate "logical_binary_operator"
-+  (match_code "ior,xor,and"))
-+
-+;; True for logical shift operators
-+(define_predicate "logical_shift_operator"
-+  (match_code "ashift,lshiftrt"))
-+
-+;; True for shift operand for logical and, or and eor insns
-+(define_predicate "avr32_logical_shift_operand"
-+  (and (match_code "ashift,lshiftrt")
-+       (ior (and (match_test "GET_CODE(XEXP(op, 1)) == CONST_INT")
-+                 (match_test "register_operand(XEXP(op, 0), GET_MODE(XEXP(op, 0)))"))
-+            (and (match_test "GET_CODE(XEXP(op, 0)) == CONST_INT")
-+                 (match_test "register_operand(XEXP(op, 1), GET_MODE(XEXP(op, 1)))"))))
-+  {
-+   return 1;
-+  }
-+  )
-+
-+
-+;; Predicate for second operand to and, ior and xor insn patterns
-+(define_predicate "avr32_logical_insn_operand"
-+  (ior (match_operand 0 "register_operand")
-+       (match_operand 0 "avr32_logical_shift_operand"))
-+  {
-+   return 1;
-+  }
-+)
-+
-+
-+;; True for avr32 comparison operators
-+(define_predicate "avr32_comparison_operator"
-+  (ior (match_code "eq, ne, gt, ge, lt, le, gtu, geu, ltu, leu")
-+       (and (match_code "unspec")
-+            (match_test "(XINT(op, 1) == UNSPEC_COND_MI)
-+                         || (XINT(op, 1) == UNSPEC_COND_PL)"))))
-+
-+;; True if this is a const_int with one bit set
-+(define_predicate "one_bit_set_operand"
-+  (match_code "const_int")
-+  {
-+   int i;
-+   int value;
-+   int ones = 0;
-+
-+   value = INTVAL(op);
-+   for ( i = 0 ; i < 32; i++ ){
-+     if ( value & ( 1 << i ) ){
-+        ones++;
-+      }
-+   }
-+
-+   return ( ones == 1 );
-+  })
-+
-+
-+;; True if this is a const_int with one bit cleared
-+(define_predicate "one_bit_cleared_operand"
-+  (match_code "const_int")
-+  {
-+   int i;
-+   int value;
-+   int zeroes = 0;
-+
-+   value = INTVAL(op);
-+   for ( i = 0 ; i < 32; i++ ){
-+     if ( !(value & ( 1 << i )) ){
-+        zeroes++;
-+      }
-+   }
-+
-+   return ( zeroes == 1 );
-+  })
-+
-+
-+;; True if this is a register or immediate operand
-+(define_predicate "register_immediate_operand"
-+  (ior (match_operand 0 "register_operand")
-+       (match_operand 0 "immediate_operand")))
-+
-+
-+;; True is this is an operand containing a label_ref
-+(define_predicate "avr32_label_ref_operand"
-+  (and (match_code "mem")
-+       (match_test "avr32_find_symbol(op)
-+                    && (GET_CODE(avr32_find_symbol(op)) == LABEL_REF)")))
-+
-+;; True is this is a valid symbol pointing to the constant pool
-+(define_predicate "avr32_const_pool_operand"
-+  (and (match_code "symbol_ref")
-+       (match_test "CONSTANT_POOL_ADDRESS_P(op)"))
-+  {
-+        return (flag_pic ? (!(symbol_mentioned_p (get_pool_constant (op))
-+                        || label_mentioned_p (get_pool_constant (op)))
-+                       || avr32_got_mentioned_p(get_pool_constant (op)))
-+                    : true);
-+  }
-+)
-+
-+;; True is this is a memory reference to the constant or mini pool
-+(define_predicate "avr32_const_pool_ref_operand"
-+  (ior (match_operand 0 "avr32_label_ref_operand")
-+       (and (match_code "mem")
-+            (match_test "avr32_const_pool_operand(XEXP(op,0), GET_MODE(XEXP(op,0)))"))))
-+
-+
-+
-+;; True is this is a k12 offseted memory operand
-+(define_predicate "avr32_k12_memory_operand"
-+  (and (match_code "mem")
-+       (ior (match_test "REG_P(XEXP(op, 0))")
-+            (match_test "GET_CODE(XEXP(op, 0)) == PLUS
-+                         && REG_P(XEXP(XEXP(op, 0), 0))
-+                         && (GET_CODE(XEXP(XEXP(op, 0), 1)) == CONST_INT)
-+                         && (CONST_OK_FOR_CONSTRAINT_P(INTVAL(XEXP(XEXP(op, 0), 0)),
-+                                'K', (mode == SImode) ? \"Ks14\" : ((mode == HImode) ? \"Ks13\" : \"Ks12\")))"))))
-+
-+;; True is this is a memory operand with an immediate displacement
-+(define_predicate "avr32_imm_disp_memory_operand"
-+  (and (match_code "mem")
-+       (match_test "GET_CODE(XEXP(op, 0)) == PLUS
-+                    && REG_P(XEXP(XEXP(op, 0), 0))
-+                    && (GET_CODE(XEXP(XEXP(op, 0), 1)) == CONST_INT)")))
-+
-+;; True is this is a bswap operand
-+(define_predicate "avr32_bswap_operand"
-+  (ior (match_operand 0 "avr32_k12_memory_operand")
-+       (match_operand 0 "register_operand")))
-+
-+;; True is this is a valid coprocessor insn memory operand
-+(define_predicate "avr32_cop_memory_operand"
-+  (and (match_operand 0 "memory_operand")
-+       (not (match_test "GET_CODE(XEXP(op, 0)) == PLUS
-+                         && REG_P(XEXP(XEXP(op, 0), 0))
-+                         && (GET_CODE(XEXP(XEXP(op, 0), 1)) == CONST_INT)
-+                         && !(CONST_OK_FOR_CONSTRAINT_P(INTVAL(XEXP(XEXP(op, 0), 0)), 'K', \"Ku10\"))"))))
-+
-+;; True is this is a valid source/destination operand
-+;; for moving values to/from a coprocessor
-+(define_predicate "avr32_cop_move_operand"
-+  (ior (match_operand 0 "register_operand")
-+       (match_operand 0 "avr32_cop_memory_operand")))
-+
-+
-+;; True is this is a valid extract byte offset for use in
-+;; load extracted index insns
-+(define_predicate "avr32_extract_shift_operand"
-+  (and (match_operand 0 "const_int_operand")
-+       (match_test "(INTVAL(op) == 0) || (INTVAL(op) == 8)
-+                    || (INTVAL(op) == 16) || (INTVAL(op) == 24)")))
-+
-+;; True is this is a floating-point register
-+(define_predicate "avr32_fp_register_operand"
-+  (and (match_operand 0 "register_operand")
-+       (match_test "REGNO_REG_CLASS(REGNO(op)) == FP_REGS")))
-+
-+;; True is this is valid avr32 symbol operand
-+(define_predicate "avr32_symbol_operand"
-+  (ior (match_code "label_ref, symbol_ref")
-+       (and (match_code "const")
-+            (match_test "avr32_find_symbol(op)"))))
-+
-+;; True is this is valid operand for the lda.w and call pseudo insns
-+(define_predicate "avr32_address_operand"
-+  (and (match_code "label_ref, symbol_ref")
-+       (ior (match_test "TARGET_HAS_ASM_ADDR_PSEUDOS")
-+            (match_test "flag_pic")) ))
-+
-+;; True if this is a avr32 call operand
-+(define_predicate "avr32_call_operand"
-+  (ior (ior (match_operand 0 "register_operand")
-+            (ior (match_operand 0 "avr32_const_pool_ref_operand")
-+                 (match_operand 0 "avr32_address_operand")))
-+       (match_test "SYMBOL_REF_RCALL_FUNCTION_P(op)")))
-+
-+;; Return true for operators performing ALU operations
-+
-+(define_predicate "alu_operator"
-+  (match_code "ior, xor, and, plus, minus, ashift, lshiftrt, ashiftrt"))
-+
-+(define_predicate "avr32_add_shift_immediate_operand"
-+  (and (match_operand 0 "immediate_operand")
-+       (match_test "CONST_OK_FOR_CONSTRAINT_P(INTVAL(op), 'K', \"Ku02\")")))
-+
---- /dev/null
-+++ b/gcc/config/avr32/simd.md
-@@ -0,0 +1,145 @@
-+;;   AVR32 machine description file for SIMD instructions.
-+;;   Copyright 2003-2006 Atmel Corporation.
-+;;
-+;;   Written by Ronny Pedersen, Atmel Norway, <rpedersen@atmel.com>
-+;;
-+;;   This file is part of GCC.
-+;;
-+;;   This program is free software; you can redistribute it and/or modify
-+;;   it under the terms of the GNU General Public License as published by
-+;;   the Free Software Foundation; either version 2 of the License, or
-+;;   (at your option) any later version.
-+;;
-+;;   This program is distributed in the hope that it will be useful,
-+;;   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+;;   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+;;   GNU General Public License for more details.
-+;;
-+;;   You should have received a copy of the GNU General Public License
-+;;   along with this program; if not, write to the Free Software
-+;;   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+
-+;; -*- Mode: Scheme -*-
-+
-+
-+;; Vector modes
-+(define_mode_macro VECM [V2HI V4QI])
-+(define_mode_attr  size [(V2HI "h") (V4QI "b")])
-+
-+(define_insn "add<mode>3"
-+  [(set (match_operand:VECM 0 "register_operand" "=r")
-+	(plus:VECM (match_operand:VECM 1 "register_operand" "r")
-+                   (match_operand:VECM 2 "register_operand" "r")))]
-+  "TARGET_SIMD"
-+  "padd.<size>\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+
-+(define_insn "sub<mode>3"
-+  [(set (match_operand:VECM 0 "register_operand" "=r")
-+	(minus:VECM (match_operand:VECM 1 "register_operand" "r")
-+                    (match_operand:VECM 2 "register_operand" "r")))]
-+  "TARGET_SIMD"
-+  "psub.<size>\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+
-+(define_insn "abs<mode>2"
-+  [(set (match_operand:VECM 0 "register_operand" "=r")
-+	(abs:VECM (match_operand:VECM 1 "register_operand" "r")))]
-+  "TARGET_SIMD"
-+  "pabs.s<size>\t%0, %1"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+(define_insn "ashl<mode>3"
-+  [(set (match_operand:VECM 0 "register_operand"           "=r")
-+	(ashift:VECM (match_operand:VECM 1 "register_operand" "r")
-+                     (match_operand:SI 2 "immediate_operand" "Ku04")))]
-+  "TARGET_SIMD"
-+  "plsl.<size>\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+(define_insn "ashr<mode>3"
-+  [(set (match_operand:VECM 0 "register_operand"           "=r")
-+	(ashiftrt:VECM (match_operand:VECM 1 "register_operand" "r")
-+                       (match_operand:SI 2 "immediate_operand" "Ku04")))]
-+  "TARGET_SIMD"
-+  "pasr.<size>\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+(define_insn "lshr<mode>3"
-+  [(set (match_operand:VECM 0 "register_operand"           "=r")
-+	(lshiftrt:VECM (match_operand:VECM 1 "register_operand" "r")
-+                       (match_operand:SI 2 "immediate_operand" "Ku04")))]
-+  "TARGET_SIMD"
-+  "plsr.<size>\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+(define_insn "smaxv2hi3"
-+  [(set (match_operand:V2HI 0 "register_operand" "=r")
-+	(smax:V2HI (match_operand:V2HI 1 "register_operand" "r")
-+                        (match_operand:V2HI 2 "register_operand" "r")))]
-+
-+  "TARGET_SIMD"
-+  "pmax.sh\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+(define_insn "sminv2hi3"
-+  [(set (match_operand:V2HI 0 "register_operand" "=r")
-+	(smin:V2HI (match_operand:V2HI 1 "register_operand" "r")
-+                        (match_operand:V2HI 2 "register_operand" "r")))]
-+
-+  "TARGET_SIMD"
-+  "pmin.sh\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+(define_insn "umaxv4qi3"
-+  [(set (match_operand:V4QI 0 "register_operand" "=r")
-+	(umax:V4QI (match_operand:V4QI 1 "register_operand" "r")
-+                   (match_operand:V4QI 2 "register_operand" "r")))]
-+
-+  "TARGET_SIMD"
-+  "pmax.ub\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+(define_insn "uminv4qi3"
-+  [(set (match_operand:V4QI 0 "register_operand" "=r")
-+	(umin:V4QI (match_operand:V4QI 1 "register_operand" "r")
-+                   (match_operand:V4QI 2 "register_operand" "r")))]
-+
-+  "TARGET_SIMD"
-+  "pmin.ub\t%0, %1, %2"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+
-+(define_insn "addsubv2hi"
-+  [(set (match_operand:V2HI 0 "register_operand" "=r")
-+        (vec_concat:V2HI
-+         (plus:HI (match_operand:HI 1 "register_operand" "r")
-+                  (match_operand:HI 2 "register_operand" "r"))
-+         (minus:HI (match_dup 1) (match_dup 2))))]
-+  "TARGET_SIMD"
-+  "paddsub.h\t%0, %1:b, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
-+
-+(define_insn "subaddv2hi"
-+  [(set (match_operand:V2HI 0 "register_operand" "=r")
-+        (vec_concat:V2HI
-+         (minus:HI (match_operand:HI 1 "register_operand" "r")
-+                  (match_operand:HI 2 "register_operand" "r"))
-+         (plus:HI (match_dup 1) (match_dup 2))))]
-+  "TARGET_SIMD"
-+  "psubadd.h\t%0, %1:b, %2:b"
-+  [(set_attr "length" "4")
-+   (set_attr "type" "alu")])
---- /dev/null
-+++ b/gcc/config/avr32/t-avr32
-@@ -0,0 +1,63 @@
-+
-+MD_INCLUDES= 	$(srcdir)/config/avr32/avr32.md \
-+		$(srcdir)/config/avr32/fpcp.md \
-+		$(srcdir)/config/avr32/simd.md \
-+                $(srcdir)/config/avr32/predicates.md
-+
-+s-config s-conditions s-flags s-codes s-constants s-emit s-recog s-preds \
-+	s-opinit s-extract s-peep s-attr s-attrtab s-output: $(MD_INCLUDES)
-+
-+# We want fine grained libraries, so use the new code
-+# to build the floating point emulation libraries.
-+FPBIT = fp-bit.c
-+DPBIT = dp-bit.c
-+
-+LIB1ASMSRC = avr32/lib1funcs.S
-+LIB1ASMFUNCS =  _avr32_f64_mul _avr32_f64_addsub  _avr32_f64_to_u32 _avr32_f64_to_s32 \
-+                _avr32_f64_to_u64 _avr32_f64_to_s64 _avr32_u32_to_f64 _avr32_s32_to_f64 \
-+                _avr32_f64_cmp_eq _avr32_f64_cmp_ge _avr32_f64_cmp_lt \
-+                _avr32_f32_cmp_eq _avr32_f32_cmp_ge _avr32_f32_cmp_lt \
-+                _avr32_f64_div _avr32_f32_div\
-+                _avr32_f32_mul _avr32_s32_to_f32 _avr32_u32_to_f32 _avr32_f32_to_s32 \
-+                _avr32_f32_to_u32 _avr32_f32_to_f64 _avr32_f64_to_f32
-+
-+LIB2FUNCS_EXTRA += $(srcdir)/config/avr32/lib2funcs.S
-+
-+MULTILIB_OPTIONS     = march=ap/march=uc
-+MULTILIB_DIRNAMES    = ap uc
-+MULTILIB_EXCEPTIONS  =
-+MULTILIB_MATCHES     = march?ap=mcpu?ap7000
-+MULTILIB_MATCHES     += march?ap=mcpu?ap7010
-+MULTILIB_MATCHES     += march?ap=mcpu?ap7020
-+MULTILIB_MATCHES     += march?uc=mcpu?uc3a0256
-+MULTILIB_MATCHES     += march?uc=mcpu?uc3a0512
-+MULTILIB_MATCHES     += march?uc=mcpu?uc3a1128
-+MULTILIB_MATCHES     += march?uc=mcpu?uc3a1256
-+MULTILIB_MATCHES     += march?uc=mcpu?uc3a1512
-+MULTILIB_MATCHES     += march?ap=mpart?ap7000
-+MULTILIB_MATCHES     += march?ap=mpart?ap7010
-+MULTILIB_MATCHES     += march?ap=mpart?ap7020
-+MULTILIB_MATCHES     += march?uc=mpart?uc3a0256
-+MULTILIB_MATCHES     += march?uc=mpart?uc3a0512
-+MULTILIB_MATCHES     += march?uc=mpart?uc3a1128
-+MULTILIB_MATCHES     += march?uc=mpart?uc3a1256
-+MULTILIB_MATCHES     += march?uc=mpart?uc3a1512
-+
-+EXTRA_MULTILIB_PARTS = crtbegin.o crtbeginS.o crtend.o crtendS.o crti.o crtn.o
-+
-+CRTSTUFF_T_CFLAGS = -mrelax
-+CRTSTUFF_T_CFLAGS_S = -mrelax -fPIC
-+TARGET_LIBGCC2_CFLAGS += -mrelax
-+
-+LIBGCC = stmp-multilib
-+INSTALL_LIBGCC = install-multilib
-+
-+fp-bit.c: $(srcdir)/config/fp-bit.c
-+	echo '#define FLOAT' > fp-bit.c
-+	cat $(srcdir)/config/fp-bit.c >> fp-bit.c
-+
-+dp-bit.c: $(srcdir)/config/fp-bit.c
-+	cat $(srcdir)/config/fp-bit.c > dp-bit.c
-+
-+
-+
---- /dev/null
-+++ b/gcc/config/avr32/t-elf
-@@ -0,0 +1,16 @@
-+
-+# Assemble startup files.
-+$(T)crti.o: $(srcdir)/config/avr32/crti.asm $(GCC_PASSES)
-+	$(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) $(INCLUDES) \
-+	-c -o $(T)crti.o -x assembler-with-cpp $(srcdir)/config/avr32/crti.asm
-+
-+$(T)crtn.o: $(srcdir)/config/avr32/crtn.asm $(GCC_PASSES)
-+	$(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) $(INCLUDES) \
-+	-c -o $(T)crtn.o -x assembler-with-cpp $(srcdir)/config/avr32/crtn.asm
-+
-+
-+# Build the libraries for both hard and soft floating point
-+EXTRA_MULTILIB_PARTS = crtbegin.o crtbeginS.o crtend.o crtendS.o crti.o crtn.o
-+
-+LIBGCC = stmp-multilib
-+INSTALL_LIBGCC = install-multilib
---- /dev/null
-+++ b/gcc/config/avr32/uclinux-elf.h
-@@ -0,0 +1,20 @@
-+
-+/* Run-time Target Specification.  */
-+#undef  TARGET_VERSION
-+#define TARGET_VERSION  fputs (" (AVR32 uClinux with ELF)", stderr)
-+
-+/* We don't want a .jcr section on uClinux. As if this makes a difference... */
-+#define TARGET_USE_JCR_SECTION 0
-+
-+/* Here we go. Drop the crtbegin/crtend stuff completely. */
-+#undef STARTFILE_SPEC
-+#define STARTFILE_SPEC							\
-+  "%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s}"			\
-+  " %{!p:%{profile:gcrt1.o%s}"						\
-+  " %{!profile:crt1.o%s}}}} crti.o%s"
-+
-+#undef ENDFILE_SPEC
-+#define ENDFILE_SPEC "crtn.o%s"
-+
-+#undef TARGET_DEFAULT
-+#define TARGET_DEFAULT (AVR32_FLAG_NO_INIT_GOT)
---- a/gcc/config/host-linux.c
-+++ b/gcc/config/host-linux.c
-@@ -26,6 +26,9 @@
- #include "hosthooks.h"
- #include "hosthooks-def.h"
- 
-+#ifndef SSIZE_MAX
-+#define SSIZE_MAX LONG_MAX
-+#endif
- 
- /* Linux has a feature called exec-shield-randomize that perturbs the
-    address of non-fixed mapped segments by a (relatively) small amount.
---- a/gcc/config.gcc
-+++ b/gcc/config.gcc
-@@ -751,6 +751,24 @@ avr-*-*)
- 	tm_file="avr/avr.h dbxelf.h"
- 	use_fixproto=yes
- 	;;
-+avr32*-*-linux*)
-+    tm_file="dbxelf.h elfos.h linux.h avr32/linux-elf.h avr32/avr32.h "
-+    tmake_file="t-linux avr32/t-avr32 avr32/t-elf"
-+	extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
-+	extra_modes=avr32/avr32-modes.def
-+	gnu_ld=yes
-+	;;
-+avr32*-*-uclinux*)
-+	tm_file="dbxelf.h elfos.h linux.h avr32/linux-elf.h avr32/uclinux-elf.h avr32/avr32.h"
-+	tmake_file="t-linux avr32/t-avr32 avr32/t-elf"
-+	extra_modes=avr32/avr32-modes.def
-+	gnu_ld=yes
-+	;;
-+avr32-*-*)
-+    tm_file="dbxelf.h elfos.h avr32/avr32.h avr32/avr32-elf.h"
-+    tmake_file="avr32/t-avr32 avr32/t-elf"
-+	extra_modes=avr32/avr32-modes.def
-+	;;
- bfin*-elf*)
- 	tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
-         tmake_file=bfin/t-bfin-elf
-@@ -1614,6 +1632,9 @@ pdp11-*-bsd)
- pdp11-*-*)
- 	use_fixproto=yes
- 	;;
-+avr-*-*)
-+	use_fixproto=yes
-+	;;
- # port not yet contributed
- #powerpc-*-openbsd*)
- #	tmake_file="${tmake_file} rs6000/t-fprules "
-@@ -2581,6 +2602,21 @@ case "${target}" in
- 		fi
- 		;;
- 
-+	avr32*-*-*)
-+		supported_defaults="cpu"
-+
-+		case "$with_cpu" in
-+		"" \
-+		| morgan | ap7000 )
-+			# OK
-+			;;
-+		*)
-+			echo "Unknown arch used in --with-arch=$with_arch" 1>&2
-+			exit 1
-+			;;
-+		esac
-+                ;;
-+
- 	fr*-*-*linux*)
- 		supported_defaults=cpu
- 		case "$with_cpu" in
---- a/gcc/doc/extend.texi
-+++ b/gcc/doc/extend.texi
-@@ -1887,7 +1887,7 @@ this attribute to work correctly.
- 
- @item interrupt
- @cindex interrupt handler functions
--Use this attribute on the ARM, AVR, C4x, CRX, M32C, M32R/D, MS1, and Xstormy16
-+Use this attribute on the ARM, AVR, AVR32, C4x, CRX, M32C, M32R/D, MS1, and Xstormy16
- ports to indicate that the specified function is an interrupt handler.
- The compiler will generate function entry and exit sequences suitable
- for use in an interrupt handler when this attribute is present.
-@@ -1906,6 +1906,15 @@ void f () __attribute__ ((interrupt ("IR
- 
- Permissible values for this parameter are: IRQ, FIQ, SWI, ABORT and UNDEF@.
- 
-+Note, for the AVR32, you can specify which banking scheme is used for
-+the interrupt mode this interrupt handler is used in like this:
-+
-+@smallexample
-+void f () __attribute__ ((interrupt ("FULL")));
-+@end smallexample
-+
-+Permissible values for this parameter are: FULL, HALF, NONE and UNDEF.
-+
- @item interrupt_handler
- @cindex interrupt handler functions on the Blackfin, m68k, H8/300 and SH processors
- Use this attribute on the Blackfin, m68k, H8/300, H8/300H, H8S, and SH to
-@@ -5807,6 +5816,7 @@ instructions, but allow the compiler to 
- @menu
- * Alpha Built-in Functions::
- * ARM Built-in Functions::
-+* AVR32 Built-in Functions::
- * Blackfin Built-in Functions::
- * FR-V Built-in Functions::
- * X86 Built-in Functions::
-@@ -6045,6 +6055,54 @@ long long __builtin_arm_wxor (long long,
- long long __builtin_arm_wzero ()
- @end smallexample
- 
-+@node AVR32 Built-in Functions
-+@subsection AVR32 Built-in Functions
-+
-+
-+@smallexample
-+
-+int __builtin_sats (int /*Rd*/,int /*sa*/, int /*bn*/)
-+int __builtin_satu (int /*Rd*/,int /*sa*/, int /*bn*/)
-+int __builtin_satrnds (int /*Rd*/,int /*sa*/, int /*bn*/)
-+int __builtin_satrndu (int /*Rd*/,int /*sa*/, int /*bn*/)
-+short __builtin_mulsathh_h (short, short)
-+int __builtin_mulsathh_w (short, short)
-+short __builtin_mulsatrndhh_h (short, short)
-+int __builtin_mulsatrndwh_w (int, short)
-+int __builtin_mulsatwh_w (int, short)
-+int __builtin_macsathh_w (int, short, short)
-+short __builtin_satadd_h (short, short)
-+short __builtin_satsub_h (short, short)
-+int __builtin_satadd_w (int, int)
-+int __builtin_satsub_w (int, int)
-+long long __builtin_mulwh_d(int, short)
-+long long __builtin_mulnwh_d(int, short)
-+long long __builtin_macwh_d(long long, int, short)
-+long long __builtin_machh_d(long long, short, short)
-+
-+void __builtin_musfr(int);
-+int __builtin_mustr(void);
-+int __builtin_mfsr(int /*Status Register Address*/)
-+void __builtin_mtsr(int /*Status Register Address*/, int /*Value*/)
-+int __builtin_mfdr(int /*Debug Register Address*/)
-+void __builtin_mtdr(int /*Debug Register Address*/, int /*Value*/)
-+void __builtin_cache(void * /*Address*/, int /*Cache Operation*/)
-+void __builtin_sync(int /*Sync Operation*/)
-+void __builtin_tlbr(void)
-+void __builtin_tlbs(void)
-+void __builtin_tlbw(void)
-+void __builtin_breakpoint(void)
-+int __builtin_xchg(void * /*Address*/, int /*Value*/ )
-+short __builtin_bswap_16(short)
-+int __builtin_bswap_32(int)
-+void __builtin_cop(int/*cpnr*/, int/*crd*/, int/*crx*/, int/*cry*/, int/*op*/)
-+int __builtin_mvcr_w(int/*cpnr*/, int/*crs*/)
-+void __builtin_mvrc_w(int/*cpnr*/, int/*crd*/, int/*value*/)
-+long long __builtin_mvcr_d(int/*cpnr*/, int/*crs*/)
-+void __builtin_mvrc_d(int/*cpnr*/, int/*crd*/, long long/*value*/)
-+
-+@end smallexample
-+
- @node Blackfin Built-in Functions
- @subsection Blackfin Built-in Functions
- 
---- a/gcc/doc/invoke.texi
-+++ b/gcc/doc/invoke.texi
-@@ -185,7 +185,7 @@ in the following sections.
- -fno-default-inline  -fvisibility-inlines-hidden @gol
- -Wabi  -Wctor-dtor-privacy @gol
- -Wnon-virtual-dtor  -Wreorder @gol
---Weffc++  -Wno-deprecated  -Wstrict-null-sentinel @gol
-+-Weffc++  -Wno-deprecated @gol
- -Wno-non-template-friend  -Wold-style-cast @gol
- -Woverloaded-virtual  -Wno-pmf-conversions @gol
- -Wsign-promo}
-@@ -569,6 +569,10 @@ Objective-C and Objective-C++ Dialects}.
- -mauto-incdec  -minmax  -mlong-calls  -mshort @gol
- -msoft-reg-count=@var{count}}
- 
-+@emph{AVR32 Options}
-+@gccoptlist{-muse-rodata-section -mhard-float -msoft-float -mrelax @gol
-+-muse-oscall -mforce-double-align -mno-init-got -mcpu=@var{cpu}}
-+
- @emph{MCore Options}
- @gccoptlist{-mhardlit  -mno-hardlit  -mdiv  -mno-div  -mrelax-immediates @gol
- -mno-relax-immediates  -mwide-bitfields  -mno-wide-bitfields @gol
-@@ -1797,14 +1801,6 @@ to filter out those warnings.
- @opindex Wno-deprecated
- Do not warn about usage of deprecated features.  @xref{Deprecated Features}.
- 
--@item -Wstrict-null-sentinel @r{(C++ only)}
--@opindex Wstrict-null-sentinel
--Warn also about the use of an uncasted @code{NULL} as sentinel.  When
--compiling only with GCC this is a valid sentinel, as @code{NULL} is defined
--to @code{__null}.  Although it is a null pointer constant not a null pointer,
--it is guaranteed to of the same size as a pointer.  But this use is
--not portable across different compilers.
--
- @item -Wno-non-template-friend @r{(C++ only)}
- @opindex Wno-non-template-friend
- Disable warnings when non-templatized friend functions are declared
-@@ -2662,13 +2658,11 @@ get these warnings.
- If you want to warn about code which uses the uninitialized value of the
- variable in its own initializer, use the @option{-Winit-self} option.
- 
--These warnings occur for individual uninitialized or clobbered
--elements of structure, union or array variables as well as for
--variables which are uninitialized or clobbered as a whole.  They do
--not occur for variables or elements declared @code{volatile}.  Because
--these warnings depend on optimization, the exact variables or elements
--for which there are warnings will depend on the precise optimization
--options and version of GCC used.
-+These warnings occur only for variables that are candidates for
-+register allocation.  Therefore, they do not occur for a variable that
-+is declared @code{volatile}, or whose address is taken, or whose size
-+is other than 1, 2, 4 or 8 bytes.  Also, they do not occur for
-+structures, unions or arrays, even when they are in registers.
- 
- Note that there may be no warning about a variable that is used only
- to compute a value that itself is never used, because such
-@@ -5935,10 +5929,6 @@ If number of candidates in the set is sm
- we always try to remove unnecessary ivs from the set during its
- optimization when a new iv is added to the set.
- 
--@item scev-max-expr-size
--Bound on size of expressions used in the scalar evolutions analyzer.
--Large expressions slow the analyzer.
--
- @item vect-max-version-checks
- The maximum number of runtime checks that can be performed when doing
- loop versioning in the vectorizer.  See option ftree-vect-loop-version
-@@ -7115,7 +7105,7 @@ platform.
- * ARC Options::
- * ARM Options::
- * AVR Options::
--* Blackfin Options::
-+* AVR32 Options::
- * CRIS Options::
- * CRX Options::
- * Darwin Options::
-@@ -7578,81 +7568,55 @@ comply to the C standards, but it will p
- size.
- @end table
- 
--@node Blackfin Options
--@subsection Blackfin Options
--@cindex Blackfin Options
-+@node AVR32 Options
-+@subsection AVR32 Options
-+@cindex AVR32 Options
- 
--@table @gcctabopt
--@item -momit-leaf-frame-pointer
--@opindex momit-leaf-frame-pointer
--Don't keep the frame pointer in a register for leaf functions.  This
--avoids the instructions to save, set up and restore frame pointers and
--makes an extra register available in leaf functions.  The option
--@option{-fomit-frame-pointer} removes the frame pointer for all functions
--which might make debugging harder.
-+These options are defined for AVR32 implementations:
- 
--@item -mspecld-anomaly
--@opindex mspecld-anomaly
--When enabled, the compiler will ensure that the generated code does not
--contain speculative loads after jump instructions.  This option is enabled
--by default.
--
--@item -mno-specld-anomaly
--@opindex mno-specld-anomaly
--Don't generate extra code to prevent speculative loads from occurring.
--
--@item -mcsync-anomaly
--@opindex mcsync-anomaly
--When enabled, the compiler will ensure that the generated code does not
--contain CSYNC or SSYNC instructions too soon after conditional branches.
--This option is enabled by default.
--
--@item -mno-csync-anomaly
--@opindex mno-csync-anomaly
--Don't generate extra code to prevent CSYNC or SSYNC instructions from
--occurring too soon after a conditional branch.
--
--@item -mlow-64k
--@opindex mlow-64k
--When enabled, the compiler is free to take advantage of the knowledge that
--the entire program fits into the low 64k of memory.
--
--@item -mno-low-64k
--@opindex mno-low-64k
--Assume that the program is arbitrarily large.  This is the default.
-+@table @gcctabopt
-+@item -muse-rodata-section
-+@opindex muse-rodata-section
-+Use section @samp{.rodata} for read-only data instead of @samp{.text}.
- 
--@item -mid-shared-library
--@opindex mid-shared-library
--Generate code that supports shared libraries via the library ID method.
--This allows for execute in place and shared libraries in an environment
--without virtual memory management.  This option implies @option{-fPIC}.
-+@item -mhard-float
-+@opindex mhard-float
-+Use floating-point coprocessor instructions. 
- 
--@item -mno-id-shared-library
--@opindex mno-id-shared-library
--Generate code that doesn't assume ID based shared libraries are being used.
--This is the default.
-+@item -msoft-float
-+@opindex msoft-float
-+Use software floating-point library. 
- 
--@item -mshared-library-id=n
--@opindex mshared-library-id
--Specified the identification number of the ID based shared library being
--compiled.  Specifying a value of 0 will generate more compact code, specifying
--other values will force the allocation of that number to the current
--library but is no more space or time efficient than omitting this option.
-+@item -mrelax
-+@opindex mrelax
-+Enable relaxing in linker. This means that when the address of symbols
-+are known at link time, the linker can optimize @samp{icall} and @samp{mcall}
-+instructions into a @samp{rcall} instruction if possible. Loading the address
-+of a symbol can also be optimized.  
-+
-+@item -muse-oscall
-+@opindex muse-oscall
-+When using gcc as a frontend for linking this switch forces the use of
-+@samp{fake} system calls in the newlib c-library. These fake system
-+calls are handled by some AVR32 simulators which redirects these calls
-+to the OS in which the simulator is running. This is practical for
-+being able to perform file I/O when running programs in a simulator. 
-+
-+@item -mforce-double-align
-+@opindex mforce-double-align
-+Force double-word alignment for double-word memory accesses.
-+
-+@item -mno-init-got
-+@opindex mno-init-got
-+Do not initialize the GOT register before using it when compiling PIC
-+code.
- 
--@item -mlong-calls
--@itemx -mno-long-calls
--@opindex mlong-calls
--@opindex mno-long-calls
--Tells the compiler to perform function calls by first loading the
--address of the function into a register and then performing a subroutine
--call on this register.  This switch is needed if the target function
--will lie outside of the 24 bit addressing range of the offset based
--version of subroutine call instruction.
-+@item -mcpu=@var{cpu-type}
-+@opindex mcpu
-+Generate code for the specified cpu. Permissible names are: @samp{morgan},
-+@samp{ap7000} and @samp{default}. @samp{default} is a dummy cpu which
-+allows all avr32 instructions. 
- 
--This feature is not enabled by default.  Specifying
--@option{-mno-long-calls} will restore the default behavior.  Note these
--switches have no effect on how the compiler generates code to handle
--function calls via function pointers.
- @end table
- 
- @node CRIS Options
-@@ -11341,6 +11305,7 @@ conventions that adheres to the March 19
- Application Binary Interface, PowerPC processor supplement.  This is the
- default unless you configured GCC using @samp{powerpc-*-eabiaix}.
- 
-+
- @item -mcall-sysv-eabi
- @opindex mcall-sysv-eabi
- Specify both @option{-mcall-sysv} and @option{-meabi} options.
---- a/gcc/doc/md.texi
-+++ b/gcc/doc/md.texi
-@@ -1686,6 +1686,59 @@ A memory reference suitable for iWMMXt l
- A memory reference suitable for the ARMv4 ldrsb instruction.
- @end table
- 
-+@item AVR32 family---@file{avr32.h}
-+@table @code
-+@item f
-+Floating-point registers (f0 to f15)
-+
-+@item Ku@var{bits}
-+Unsigned constant representable with @var{bits} number of bits (Must be
-+two digits). I.e: An unsigned 8-bit constant is written as @samp{Ku08}  
-+ 
-+@item Ks@var{bits}
-+Signed constant representable with @var{bits} number of bits (Must be
-+two digits). I.e: A signed 12-bit constant is written as @samp{Ks12}  
-+
-+@item Is@var{bits}
-+The negated range of a signed constant representable with  @var{bits} 
-+number of bits. The same as @samp{Ks@var{bits}} with a negated range. 
-+This means that the constant must be in the range @math{-2^{bits-1}-1} to @math{2^{bits-1}}
-+
-+@item G
-+A single/double precision floating-point immediate or 64-bit integer 
-+immediate where the least and most significant words both can be
-+loaded with a move instruction. That is the the integer form of the 
-+values in the least and most significant words both are in the range 
-+@math{-2^{20}} to @math{2^{20}-1}.
-+         
-+@item RKs@var{bits}
-+A memory reference where the address consists of a base register
-+plus a signed immediate displacement with range given by @samp{Ks@var{bits}}
-+which has the same format as for the signed immediate integer constraint
-+given above.  
-+
-+@item RKu@var{bits}
-+A memory reference where the address consists of a base register
-+plus an unsigned immediate displacement with range given by @samp{Ku@var{bits}}
-+which has the same format as for the unsigned immediate integer constraint
-+given above.  
-+
-+@item S
-+A memory reference with an immediate or register offset
-+
-+@item T
-+A memory reference to a constant pool entry
-+
-+@item W
-+A valid operand for use in the @samp{lda.w} instruction macro when
-+relaxing is enabled
-+
-+@item Z
-+A memory reference valid for coprocessor memory instructions
-+
-+@end table
-+
-+
- @item AVR family---@file{avr.h}
- @table @code
- @item l
-@@ -2132,102 +2185,6 @@ range of 1 to 2047.
- 
- @end table
- 
--@item Blackfin family---@file{bfin.h}
--@table @code
--@item a
--P register
--
--@item d
--D register
--
--@item z
--A call clobbered P register.
--
--@item D
--Even-numbered D register
--
--@item W
--Odd-numbered D register
--
--@item e
--Accumulator register.
--
--@item A
--Even-numbered accumulator register.
--
--@item B
--Odd-numbered accumulator register.
--
--@item b
--I register
--
--@item B
--B register
--
--@item f
--M register
--
--@item c
--Registers used for circular buffering, i.e. I, B, or L registers.
--
--@item C
--The CC register.
--
--@item x
--Any D, P, B, M, I or L register.
--
--@item y
--Additional registers typically used only in prologues and epilogues: RETS,
--RETN, RETI, RETX, RETE, ASTAT, SEQSTAT and USP.
--
--@item w
--Any register except accumulators or CC.
--
--@item Ksh
--Signed 16 bit integer (in the range -32768 to 32767)
--
--@item Kuh
--Unsigned 16 bit integer (in the range 0 to 65535)
--
--@item Ks7
--Signed 7 bit integer (in the range -64 to 63)
--
--@item Ku7
--Unsigned 7 bit integer (in the range 0 to 127)
--
--@item Ku5
--Unsigned 5 bit integer (in the range 0 to 31)
--
--@item Ks4
--Signed 4 bit integer (in the range -8 to 7)
--
--@item Ks3
--Signed 3 bit integer (in the range -3 to 4)
--
--@item Ku3
--Unsigned 3 bit integer (in the range 0 to 7)
--
--@item P@var{n}
--Constant @var{n}, where @var{n} is a single-digit constant in the range 0 to 4.
--
--@item M1
--Constant 255.
--
--@item M2
--Constant 65535.
--
--@item J
--An integer constant with exactly a single bit set.
--
--@item L
--An integer constant with all bits set except exactly one.
--
--@item H
--
--@item Q
--Any SYMBOL_REF.
--@end table
--
- @item M32C---@file{m32c.c}
- 
- @item Rsp
---- a/gcc/expr.c
-+++ b/gcc/expr.c
-@@ -3401,18 +3401,19 @@ emit_single_push_insn (enum machine_mode
-     }
-   else
-     {
-+      emit_move_insn (stack_pointer_rtx,
-+		      expand_binop (Pmode,
- #ifdef STACK_GROWS_DOWNWARD
--      /* ??? This seems wrong if STACK_PUSH_CODE == POST_DEC.  */
--      dest_addr = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
--				GEN_INT (-(HOST_WIDE_INT) rounded_size));
-+				    sub_optab,
- #else
--      /* ??? This seems wrong if STACK_PUSH_CODE == POST_INC.  */
--      dest_addr = gen_rtx_PLUS (Pmode, stack_pointer_rtx,
--				GEN_INT (rounded_size));
-+				    add_optab,
- #endif
--      dest_addr = gen_rtx_PRE_MODIFY (Pmode, stack_pointer_rtx, dest_addr);
-+				    stack_pointer_rtx,
-+				    GEN_INT (rounded_size),
-+				    NULL_RTX, 0, OPTAB_LIB_WIDEN));
-+      dest_addr = stack_pointer_rtx;
-     }
--
-+  
-   dest = gen_rtx_MEM (mode, dest_addr);
- 
-   if (type != 0)
---- a/gcc/genoutput.c
-+++ b/gcc/genoutput.c
-@@ -383,7 +383,7 @@ output_insn_data (void)
- 	}
- 
-       if (d->name && d->name[0] != '*')
--	printf ("    (insn_gen_fn) gen_%s,\n", d->name);
-+	printf ("    gen_%s,\n", d->name);
-       else
- 	printf ("    0,\n");
- 
---- a/gcc/longlong.h
-+++ b/gcc/longlong.h
-@@ -227,6 +227,39 @@ UDItype __umulsidi3 (USItype, USItype);
- #define UDIV_TIME 100
- #endif /* __arm__ */
- 
-+#if defined (__avr32__) && W_TYPE_SIZE == 32
-+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
-+  __asm__ ("add\t%1, %4, %5\n\tadc\t%0, %2, %3"		\
-+	   : "=r" ((USItype) (sh)),					\
-+	     "=&r" ((USItype) (sl))					\
-+	   : "r" ((USItype) (ah)),					\
-+	     "r" ((USItype) (bh)),					\
-+	     "r" ((USItype) (al)),					\
-+	     "r" ((USItype) (bl)) __CLOBBER_CC)
-+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-+  __asm__ ("sub\t%1, %4, %5\n\tsbc\t%0, %2, %3"		\
-+	   : "=r" ((USItype) (sh)),					\
-+	     "=&r" ((USItype) (sl))					\
-+	   : "r" ((USItype) (ah)),					\
-+	     "r" ((USItype) (bh)),					\
-+	     "r" ((USItype) (al)),					\
-+	     "r" ((USItype) (bl)) __CLOBBER_CC)
-+
-+#define __umulsidi3(a,b) ((UDItype)(a) * (UDItype)(b))
-+
-+#define umul_ppmm(w1, w0, u, v) \
-+{									\
-+  DWunion __w;								\
-+  __w.ll = __umulsidi3 (u, v);						\
-+  w1 = __w.s.high;							\
-+  w0 = __w.s.low;							\
-+}
-+
-+#define count_leading_zeros(COUNT,X)	((COUNT) = __builtin_clz (X))
-+#define count_trailing_zeros(COUNT,X)	((COUNT) = __builtin_ctz (X))
-+#define COUNT_LEADING_ZEROS_0 32
-+#endif
-+
- #if defined (__hppa) && W_TYPE_SIZE == 32
- #define add_ssaaaa(sh, sl, ah, al, bh, bl) \
-   __asm__ ("add %4,%5,%1\n\taddc %2,%3,%0"				\
---- a/libstdc++-v3/acinclude.m4
-+++ b/libstdc++-v3/acinclude.m4
-@@ -125,6 +125,15 @@ AC_DEFUN([GLIBCXX_CONFIGURE], [
-   ## other macros from doing the same.  This should be automated.)  -pme
-   need_libmath=no
- 
-+  # Check for uClibc since Linux platforms use different configuration
-+  # directories depending on the C library in use.
-+  AC_EGREP_CPP([_using_uclibc], [
-+  #include <stdio.h>
-+  #if __UCLIBC__
-+    _using_uclibc
-+  #endif
-+  ], uclibc=yes, uclibc=no)
-+
-   # Find platform-specific directories containing configuration info.
-   # Also possibly modify flags used elsewhere, as needed by the platform.
-   GLIBCXX_CHECK_HOST
-@@ -1043,8 +1052,8 @@ AC_DEFUN([GLIBCXX_ENABLE_CLOCALE], [
-           #endif
-           int main()
-           {
--              const char __one[] = "Äuglein Augmen";
--              const char __two[] = "Äuglein";
-+              const char __one[] = "�uglein Augmen";
-+              const char __two[] = "�uglein";
-               int i;
-               int j;
-               __locale_t        loc;
-@@ -1953,6 +1962,14 @@ AC_DEFUN([AC_LC_MESSAGES], [
-   ])
- ])
- 
-+# Macros that should have automatically be included, but...
-+m4_include([../config/enable.m4])
-+m4_include([../config/lead-dot.m4])
-+m4_include([../config/no-executables.m4])
-+m4_include([../libtool.m4])
-+m4_include([crossconfig.m4])
-+m4_include([linkage.m4])
-+
- # Macros from the top-level gcc directory.
- m4_include([../config/tls.m4])
- 
---- a/libstdc++-v3/config/os/gnu-linux/ctype_base.h
-+++ b/libstdc++-v3/config/os/gnu-linux/ctype_base.h
-@@ -43,8 +43,8 @@
-   struct ctype_base
-   {
-     // Non-standard typedefs.
--    typedef const int* 		__to_type;
--
-+    typedef const int*      __to_type;
-+    
-     // NB: Offsets into ctype<char>::_M_table force a particular size
-     // on the mask type. Because of this, we don't use an enum.
-     typedef unsigned short 	mask;   
---- a/libstdc++-v3/configure.host
-+++ b/libstdc++-v3/configure.host
-@@ -214,8 +214,15 @@ case "${host_os}" in
-   freebsd*)
-     os_include_dir="os/bsd/freebsd"
-     ;;
-+  linux-uclibc*)
-+    os_include_dir="os/uclibc-linux"
-+    ;;
-   gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu)
--    os_include_dir="os/gnu-linux"
-+    if [ "$uclibc" = "yes" ]; then
-+     os_include_dir="os/uclibc"
-+    else
-+      os_include_dir="os/gnu-linux"
-+    fi
-     ;;
-   hpux*)
-     os_include_dir="os/hpux"
---- a/libstdc++-v3/include/Makefile.in
-+++ b/libstdc++-v3/include/Makefile.in
-@@ -36,6 +36,7 @@ POST_UNINSTALL = :
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- 	$(top_srcdir)/fragment.am
- subdir = include
---- a/libstdc++-v3/libmath/Makefile.in
-+++ b/libstdc++-v3/libmath/Makefile.in
-@@ -37,6 +37,7 @@ POST_UNINSTALL = :
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- subdir = libmath
- DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
- ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
---- a/libstdc++-v3/libsupc++/Makefile.in
-+++ b/libstdc++-v3/libsupc++/Makefile.in
-@@ -38,6 +38,7 @@ POST_UNINSTALL = :
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = $(glibcxxinstall_HEADERS) $(srcdir)/Makefile.am \
- 	$(srcdir)/Makefile.in $(top_srcdir)/fragment.am
- subdir = libsupc++
---- a/libstdc++-v3/Makefile.in
-+++ b/libstdc++-v3/Makefile.in
-@@ -36,6 +36,7 @@ POST_UNINSTALL = :
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
- 	$(srcdir)/../config.sub $(srcdir)/../install-sh \
- 	$(srcdir)/../ltmain.sh $(srcdir)/../missing \
---- a/libstdc++-v3/po/Makefile.in
-+++ b/libstdc++-v3/po/Makefile.in
-@@ -36,6 +36,7 @@ POST_UNINSTALL = :
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- 	$(top_srcdir)/fragment.am
- subdir = po
---- a/libstdc++-v3/src/Makefile.in
-+++ b/libstdc++-v3/src/Makefile.in
-@@ -36,6 +36,7 @@ POST_UNINSTALL = :
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
-+LIBOBJDIR =
- DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- 	$(top_srcdir)/fragment.am
- subdir = src
diff --git a/toolchain/gcc/patches/4.1.2/600-fastjar_no_info.patch b/toolchain/gcc/patches/4.1.2/600-fastjar_no_info.patch
deleted file mode 100644
index 52605d4a39..0000000000
--- a/toolchain/gcc/patches/4.1.2/600-fastjar_no_info.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/fastjar/Makefile.in
-+++ b/fastjar/Makefile.in
-@@ -79,7 +79,7 @@ CCLD = $(CC)
- LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
- SOURCES = $(fastjar_SOURCES) $(grepjar_SOURCES)
- DIST_SOURCES = $(fastjar_SOURCES) $(grepjar_SOURCES)
--INFO_DEPS = fastjar.info
-+INFO_DEPS =
- am__TEXINFO_TEX_DIR = $(srcdir)/../gcc/doc/include
- DVIS = fastjar.dvi
- PDFS = fastjar.pdf
-@@ -773,7 +773,7 @@ distcleancheck: distclean
- 	       exit 1; } >&2
- check-am: all-am
- check: check-am
--all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) config.h all-local
-+all-am: Makefile $(PROGRAMS) $(MANS) config.h all-local
- installdirs:
- 	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
- 	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
diff --git a/toolchain/gcc/patches/4.1.2/740-sh-pr24836.patch b/toolchain/gcc/patches/4.1.2/740-sh-pr24836.patch
deleted file mode 100644
index 38c5b5c52e..0000000000
--- a/toolchain/gcc/patches/4.1.2/740-sh-pr24836.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-http://sourceforge.net/mailarchive/forum.php?thread_id=8959304&forum_id=5348
-http://gcc.gnu.org/bugzilla/show_bug.cgi?id=24836
-
---- a/gcc/configure.ac
-+++ b/gcc/configure.ac
-@@ -2435,7 +2435,7 @@ foo:	.long	25
- 	tls_first_minor=14
- 	tls_as_opt="-m64 -Aesame --fatal-warnings"
- 	;;
--  sh-*-* | sh[34]-*-*)
-+  sh-*-* | sh[34]*-*-*)
-     conftest_s='
- 	.section ".tdata","awT",@progbits
- foo:	.long	25
---- a/gcc/configure
-+++ b/gcc/configure
-@@ -14762,7 +14762,7 @@ foo:	.long	25
- 	tls_first_minor=14
- 	tls_as_opt="-m64 -Aesame --fatal-warnings"
- 	;;
--  sh-*-* | sh[34]-*-*)
-+  sh-*-* | sh[34]*-*-*)
-     conftest_s='
- 	.section ".tdata","awT",@progbits
- foo:	.long	25
diff --git a/toolchain/gcc/patches/4.1.2/800-arm-bigendian.patch b/toolchain/gcc/patches/4.1.2/800-arm-bigendian.patch
deleted file mode 100644
index 214241c757..0000000000
--- a/toolchain/gcc/patches/4.1.2/800-arm-bigendian.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-By Lennert Buytenhek <buytenh@wantstofly.org>
-Adds support for arm*b-linux* big-endian ARM targets
-
-See http://gcc.gnu.org/PR16350
-
---- a/gcc/config/arm/linux-elf.h
-+++ b/gcc/config/arm/linux-elf.h
-@@ -28,19 +28,33 @@
- #undef  TARGET_VERSION
- #define TARGET_VERSION  fputs (" (ARM GNU/Linux with ELF)", stderr);
- 
-+/*
-+ * 'config.gcc' defines TARGET_BIG_ENDIAN_DEFAULT as 1 for arm*b-*
-+ * (big endian) configurations.
-+ */
-+#if TARGET_BIG_ENDIAN_DEFAULT
-+#define TARGET_ENDIAN_DEFAULT MASK_BIG_END
-+#define TARGET_ENDIAN_OPTION "mbig-endian"
-+#define TARGET_LINKER_EMULATION "armelfb_linux"
-+#else
-+#define TARGET_ENDIAN_DEFAULT 0
-+#define TARGET_ENDIAN_OPTION "mlittle-endian"
-+#define TARGET_LINKER_EMULATION "armelf_linux"
-+#endif
-+
- #undef  TARGET_DEFAULT_FLOAT_ABI
- #define TARGET_DEFAULT_FLOAT_ABI ARM_FLOAT_ABI_HARD
- 
- #undef  TARGET_DEFAULT
--#define TARGET_DEFAULT (0)
-+#define TARGET_DEFAULT (TARGET_ENDIAN_DEFAULT)
- 
- #define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm6
- 
--#define SUBTARGET_EXTRA_LINK_SPEC " -m armelf_linux -p"
-+#define SUBTARGET_EXTRA_LINK_SPEC " -m " TARGET_LINKER_EMULATION " -p"
- 
- #undef  MULTILIB_DEFAULTS
- #define MULTILIB_DEFAULTS \
--	{ "marm", "mlittle-endian", "mhard-float", "mno-thumb-interwork" }
-+	{ "marm", TARGET_ENDIAN_OPTION, "mhard-float", "mno-thumb-interwork" }
- 
- /* Now we define the strings used to build the spec file.  */
- #undef  LIB_SPEC
-@@ -65,7 +79,7 @@
-    %{rdynamic:-export-dynamic} \
-    %{!dynamic-linker:-dynamic-linker " LINUX_TARGET_INTERPRETER "} \
-    -X \
--   %{mbig-endian:-EB}" \
-+   %{mbig-endian:-EB} %{mlittle-endian:-EL}" \
-    SUBTARGET_EXTRA_LINK_SPEC
- 
- #undef  LINK_SPEC
---- a/gcc/config.gcc
-+++ b/gcc/config.gcc
-@@ -672,6 +672,11 @@ arm*-*-netbsd*)
- 	;;
- arm*-*-linux*)			# ARM GNU/Linux with ELF
- 	tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" 
-+	case $target in
-+	arm*b-*)
-+		tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
-+		;;
-+	esac
- 	tmake_file="${tmake_file} t-linux arm/t-arm"
- 	case ${target} in
- 	arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi)
---- a/gcc/config/arm/linux-eabi.h
-+++ b/gcc/config/arm/linux-eabi.h
-@@ -20,6 +20,17 @@
-    the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-    Boston, MA 02110-1301, USA.  */
- 
-+/*
-+ * 'config.gcc' defines TARGET_BIG_ENDIAN_DEFAULT as 1 for arm*b-*
-+ * (big endian) configurations.
-+ */
-+#undef TARGET_LINKER_EMULATION
-+#if TARGET_BIG_ENDIAN_DEFAULT
-+#define TARGET_LINKER_EMULATION "armelfb_linux_eabi"
-+#else
-+#define TARGET_LINKER_EMULATION "armelf_linux_eabi"
-+#endif
-+
- /* On EABI GNU/Linux, we want both the BPABI builtins and the
-    GNU/Linux builtins.  */
- #undef TARGET_OS_CPP_BUILTINS
-@@ -48,7 +59,7 @@
- #define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm10tdmi
- 
- #undef SUBTARGET_EXTRA_LINK_SPEC
--#define SUBTARGET_EXTRA_LINK_SPEC " -m armelf_linux_eabi"
-+#define SUBTARGET_EXTRA_LINK_SPEC " -m " TARGET_LINKER_EMULATION
- 
- /* Use ld-linux.so.3 so that it will be possible to run "classic"
-    GNU/Linux binaries on an EABI system.  */
---- a/gcc/config/arm/bpabi.h
-+++ b/gcc/config/arm/bpabi.h
-@@ -33,9 +33,19 @@
- #undef FPUTYPE_DEFAULT
- #define FPUTYPE_DEFAULT FPUTYPE_VFP
- 
-+/*
-+ * 'config.gcc' defines TARGET_BIG_ENDIAN_DEFAULT as 1 for arm*b-*
-+ * (big endian) configurations.
-+ */
-+#if TARGET_BIG_ENDIAN_DEFAULT
-+#define TARGET_ENDIAN_DEFAULT MASK_BIG_END
-+#else
-+#define TARGET_ENDIAN_DEFAULT 0
-+#endif
-+
- /* EABI targets should enable interworking by default.  */
- #undef TARGET_DEFAULT
--#define TARGET_DEFAULT MASK_INTERWORK
-+#define TARGET_DEFAULT (MASK_INTERWORK | TARGET_ENDIAN_DEFAULT)
- 
- /* The ARM BPABI functions return a boolean; they use no special
-    calling convention.  */
diff --git a/toolchain/gcc/patches/4.1.2/802-fix-ICE-in-arm_unwind_emit_set.patch b/toolchain/gcc/patches/4.1.2/802-fix-ICE-in-arm_unwind_emit_set.patch
deleted file mode 100644
index 1a3e66ed1f..0000000000
--- a/toolchain/gcc/patches/4.1.2/802-fix-ICE-in-arm_unwind_emit_set.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/gcc/config/arm/arm.c
-+++ b/gcc/config/arm/arm.c
-@@ -15371,6 +15371,15 @@ arm_unwind_emit_set (FILE * asm_out_file
- 	  /* Move from sp to reg.  */
- 	  asm_fprintf (asm_out_file, "\t.movsp %r\n", REGNO (e0));
- 	}
-+     else if (GET_CODE (e1) == PLUS
-+	      && GET_CODE (XEXP (e1, 0)) == REG
-+	      && REGNO (XEXP (e1, 0)) == SP_REGNUM
-+	      && GET_CODE (XEXP (e1, 1)) == CONST_INT)
-+	{
-+	  /* Set reg to offset from sp.  */
-+	  asm_fprintf (asm_out_file, "\t.movsp %r, #%d\n",
-+		       REGNO (e0), (int)INTVAL(XEXP (e1, 1)));
-+	}
-       else
- 	abort ();
-       break;
diff --git a/toolchain/gcc/patches/4.1.2/820-libgcc_pic.patch b/toolchain/gcc/patches/4.1.2/820-libgcc_pic.patch
deleted file mode 100644
index 671d6594bc..0000000000
--- a/toolchain/gcc/patches/4.1.2/820-libgcc_pic.patch
+++ /dev/null
@@ -1,99 +0,0 @@
---- a/gcc/mklibgcc.in
-+++ b/gcc/mklibgcc.in
-@@ -195,6 +195,7 @@ for ml in $MULTILIBS; do
-   flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
-   shlib_slibdir_qual=
-   libgcc_a=$dir/libgcc.a
-+  libgcc_pic_a=$dir/libgcc_pic.a
-   libgcov_a=$dir/libgcov.a
-   libgcc_eh_a=
-   libgcc_s_so=
-@@ -261,6 +262,7 @@ for ml in $MULTILIBS; do
-       echo "${outV}: ${outS}; \$(gen-hide-list)"
- 
-       echo $libgcc_a: $out
-+      echo $libgcc_pic_a: $outS
-       echo $libgcc_s_so: $outS
-       if [ "$SHLIB_MKMAP" ]; then
-         echo libgcc/${dir}/libgcc.map: $outS
-@@ -301,6 +303,7 @@ for ml in $MULTILIBS; do
-         -c '$(srcdir)/libgcc2.c' -o $out
- 
-       echo $libgcc_a: $out
-+      echo $libgcc_pic_a: $outS
-       echo $libgcc_s_so: $outS
-       if [ "$SHLIB_MKMAP" ]; then
-         echo libgcc/${dir}/libgcc.map: $outS
-@@ -336,6 +339,7 @@ for ml in $MULTILIBS; do
-         -fexceptions -fnon-call-exceptions -c '$(srcdir)/libgcc2.c' -o $out
- 
-       echo $libgcc_a: $out
-+      echo $libgcc_pic_a: $outS
-       echo $libgcc_s_so: $outS
-       if [ "$SHLIB_MKMAP" ]; then
-         echo libgcc/${dir}/libgcc.map: $outS
-@@ -369,6 +373,7 @@ for ml in $MULTILIBS; do
- 	  '$(vis_hide)' -c $FPBIT -o $out
- 
- 	echo $libgcc_a: $out
-+	echo $libgcc_pic_a: $outS
- 	echo $libgcc_s_so: $outS
- 	if [ "$SHLIB_MKMAP" ]; then
- 	  echo libgcc/${dir}/libgcc.map: $outS
-@@ -400,6 +405,7 @@ for ml in $MULTILIBS; do
- 	  '$(vis_hide)' -c $DPBIT -o $out
- 
- 	echo $libgcc_a: $out
-+	echo $libgcc_pic_a: $outS
- 	echo $libgcc_s_so: $outS
- 	if [ "$SHLIB_MKMAP" ]; then
- 	  echo libgcc/${dir}/libgcc.map: $outS
-@@ -430,6 +436,7 @@ for ml in $MULTILIBS; do
- 	  '$(vis_hide)' -c $TPBIT -o $out
- 
- 	echo $libgcc_a: $out
-+	echo $libgcc_pic_a: $outS
- 	echo $libgcc_s_so: $outS
- 	if [ "$SHLIB_MKMAP" ]; then
- 	  echo libgcc/${dir}/libgcc.map: $outS
-@@ -482,6 +489,7 @@ for ml in $MULTILIBS; do
-       esac
- 
-       echo $libgcc_a: $out
-+      echo $libgcc_pic_a: $outS
-       echo $libgcc_s_so: $outS
-       if [ "$SHLIB_MKMAP" ]; then
- 	echo libgcc/${dir}/libgcc.map: $outS
-@@ -601,6 +609,7 @@ for ml in $MULTILIBS; do
- 	*)   echo "Unhandled extension: $file">&2; exit 1 ;;
-       esac
- 
-+      echo $libgcc_pic_a: $outS
-       echo $libgcc_s_so: $outS
-       if [ "$SHLIB_MKMAP" ]; then
- 	echo libgcc/${dir}/libgcc.map: $outS
-@@ -773,6 +782,13 @@ EOF
-   echo "all: $libgcc_a"
- 
-   echo ""
-+  echo "$libgcc_pic_a: stmp-dirs"
-+  echo "	-rm -f $libgcc_pic_a"
-+  echo '	$(AR_CREATE_FOR_TARGET)' $libgcc_pic_a '$(objects)'
-+  echo '	$(RANLIB_FOR_TARGET)' $libgcc_pic_a
-+  echo "all: $libgcc_pic_a"
-+
-+  echo ""
-   echo "$libgcov_a: stmp-dirs"
-   echo "	-rm -f $libgcov_a"
-   echo '	$(AR_CREATE_FOR_TARGET)' $libgcov_a '$(objects)'
-@@ -874,6 +890,10 @@ for ml in $MULTILIBS; do
-     echo '	chmod 644'  ${ldir}/libgcc_eh.a
-     echo '	$(RANLIB_FOR_TARGET)' ${ldir}/libgcc_eh.a
- 
-+    echo '	$(INSTALL_DATA)' ${dir}/libgcc_pic.a ${mapfile} ${ldir}/
-+    echo '	chmod 644'  ${ldir}/libgcc_pic.a
-+    echo '	$(RANLIB_FOR_TARGET)' ${ldir}/libgcc_pic.a
-+
-     shlib_slibdir_qual=
-     os_multilib_dir=`$GCC_FOR_TARGET $flags --print-multi-os-directory`
-     if [ "$os_multilib_dir" != . ]; then
diff --git a/toolchain/gcc/patches/4.1.2/850-unbreak-armv4t.patch b/toolchain/gcc/patches/4.1.2/850-unbreak-armv4t.patch
deleted file mode 100644
index 8e3d18ae54..0000000000
--- a/toolchain/gcc/patches/4.1.2/850-unbreak-armv4t.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/gcc/config/arm/linux-eabi.h
-+++ b/gcc/config/arm/linux-eabi.h
-@@ -56,7 +56,7 @@
-    The ARM10TDMI core is the default for armv5t, so set
-    SUBTARGET_CPU_DEFAULT to achieve this.  */
- #undef SUBTARGET_CPU_DEFAULT
--#define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm10tdmi
-+#define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm9tdmi
- 
- #undef SUBTARGET_EXTRA_LINK_SPEC
- #define SUBTARGET_EXTRA_LINK_SPEC " -m " TARGET_LINKER_EMULATION
diff --git a/toolchain/gcc/patches/4.1.2/910-mbsd_multi.patch b/toolchain/gcc/patches/4.1.2/910-mbsd_multi.patch
deleted file mode 100644
index 4b1c328b5d..0000000000
--- a/toolchain/gcc/patches/4.1.2/910-mbsd_multi.patch
+++ /dev/null
@@ -1,277 +0,0 @@
-
-	This patch brings over a few features from MirBSD:
-	* -fhonour-copts
-	  If this option is not given, it's warned (depending
-	  on environment variables). This is to catch errors
-	  of misbuilt packages which override CFLAGS themselves.
-	* -Werror-maybe-reset
-	  Has the effect of -Wno-error if GCC_NO_WERROR is
-	  set and not '0', a no-operation otherwise. This is
-	  to be able to use -Werror in "make" but prevent
-	  GNU autoconf generated configure scripts from
-	  freaking out.
-	* Make -fno-strict-aliasing and -fno-delete-null-pointer-checks
-	  the default for -O2/-Os, because they trigger gcc bugs
-	  and can delete code with security implications.
-
-	This patch was authored by Thorsten Glaser <tg@mirbsd.de>
-	with copyright assignment to the FSF in effect.
-
---- a/gcc/c-opts.c
-+++ b/gcc/c-opts.c
-@@ -103,6 +103,9 @@ static size_t deferred_count;
- /* Number of deferred options scanned for -include.  */
- static size_t include_cursor;
- 
-+/* Check if a port honours COPTS.  */
-+static int honour_copts = 0;
-+
- static void set_Wimplicit (int);
- static void handle_OPT_d (const char *);
- static void set_std_cxx98 (int);
-@@ -448,6 +451,14 @@ c_common_handle_option (size_t scode, co
-       mesg_implicit_function_declaration = 2;
-       break;
- 
-+    case OPT_Werror_maybe_reset:
-+      {
-+	char *ev = getenv ("GCC_NO_WERROR");
-+	if ((ev != NULL) && (*ev != '0'))
-+	  cpp_opts->warnings_are_errors = 0;
-+      }
-+      break;
-+
-     case OPT_Wformat:
-       set_Wformat (value);
-       break;
-@@ -691,6 +702,12 @@ c_common_handle_option (size_t scode, co
-       flag_exceptions = value;
-       break;
- 
-+    case OPT_fhonour_copts:
-+      if (c_language == clk_c) {
-+	honour_copts++;
-+      }
-+      break;
-+
-     case OPT_fimplement_inlines:
-       flag_implement_inlines = value;
-       break;
-@@ -1121,6 +1138,47 @@ c_common_init (void)
-   /* Has to wait until now so that cpplib has its hash table.  */
-   init_pragma ();
- 
-+  if (c_language == clk_c) {
-+    char *ev = getenv ("GCC_HONOUR_COPTS");
-+    int evv;
-+    if (ev == NULL)
-+      evv = -1;
-+    else if ((*ev == '0') || (*ev == '\0'))
-+      evv = 0;
-+    else if (*ev == '1')
-+      evv = 1;
-+    else if (*ev == '2')
-+      evv = 2;
-+    else if (*ev == 's')
-+      evv = -1;
-+    else {
-+      warning (0, "unknown GCC_HONOUR_COPTS value, assuming 1");
-+      evv = 1; /* maybe depend this on something like MIRBSD_NATIVE?  */
-+    }
-+    if (evv == 1) {
-+      if (honour_copts == 0) {
-+	error ("someone does not honour COPTS at all in lenient mode");
-+	return false;
-+      } else if (honour_copts != 1) {
-+	warning (0, "someone does not honour COPTS correctly, passed %d times",
-+	 honour_copts);
-+      }
-+    } else if (evv == 2) {
-+      if (honour_copts == 0) {
-+	error ("someone does not honour COPTS at all in strict mode");
-+	return false;
-+      } else if (honour_copts != 1) {
-+	error ("someone does not honour COPTS correctly, passed %d times",
-+	 honour_copts);
-+	return false;
-+      }
-+    } else if (evv == 0) {
-+      if (honour_copts != 1)
-+	inform ("someone does not honour COPTS correctly, passed %d times",
-+	 honour_copts);
-+    }
-+  }
-+
-   return true;
- }
- 
---- a/gcc/c.opt
-+++ b/gcc/c.opt
-@@ -185,6 +185,10 @@ Werror-implicit-function-declaration
- C ObjC RejectNegative
- Make implicit function declarations an error
- 
-+Werror-maybe-reset
-+C ObjC C++ ObjC++
-+; Documented in common.opt
-+
- Wfloat-equal
- C ObjC C++ ObjC++ Var(warn_float_equal)
- Warn if testing floating point numbers for equality
-@@ -541,6 +545,9 @@ C++ ObjC++
- fhonor-std
- C++ ObjC++
- 
-+fhonour-copts
-+C ObjC C++ ObjC++ RejectNegative
-+
- fhosted
- C ObjC
- Assume normal C execution environment
---- a/gcc/common.opt
-+++ b/gcc/common.opt
-@@ -77,6 +77,10 @@ Werror
- Common Var(warnings_are_errors)
- Treat all warnings as errors
- 
-+Werror-maybe-reset
-+Common
-+If environment variable GCC_NO_WERROR is set, act as -Wno-error
-+
- Wextra
- Common
- Print extra (possibly unwanted) warnings
-@@ -451,6 +455,9 @@ fguess-branch-probability
- Common Report Var(flag_guess_branch_prob)
- Enable guessing of branch probabilities
- 
-+fhonour-copts
-+Common RejectNegative
-+
- ; Nonzero means ignore `#ident' directives.  0 means handle them.
- ; Generate position-independent code for executables if possible
- ; On SVR4 targets, it also controls whether or not to emit a
---- a/gcc/opts.c
-+++ b/gcc/opts.c
-@@ -569,8 +569,6 @@ decode_options (unsigned int argc, const
-       flag_schedule_insns_after_reload = 1;
- #endif
-       flag_regmove = 1;
--      flag_strict_aliasing = 1;
--      flag_delete_null_pointer_checks = 1;
-       flag_reorder_blocks = 1;
-       flag_reorder_functions = 1;
-       flag_tree_store_ccp = 1;
-@@ -586,6 +584,9 @@ decode_options (unsigned int argc, const
- 
-   if (optimize >= 3)
-     {
-+      flag_strict_aliasing = 1;
-+      flag_delete_null_pointer_checks = 1;
-+
-       flag_inline_functions = 1;
-       flag_unswitch_loops = 1;
-       flag_gcse_after_reload = 1;
-@@ -759,6 +760,17 @@ common_handle_option (size_t scode, cons
-       set_Wextra (value);
-       break;
- 
-+    case OPT_Werror_maybe_reset:
-+      {
-+	char *ev = getenv ("GCC_NO_WERROR");
-+	if ((ev != NULL) && (*ev != '0'))
-+	  warnings_are_errors = 0;
-+      }
-+      break;
-+
-+    case OPT_fhonour_copts:
-+      break;
-+
-     case OPT_Wextra:
-       set_Wextra (value);
-       break;
---- a/gcc/doc/cppopts.texi
-+++ b/gcc/doc/cppopts.texi
-@@ -166,6 +166,11 @@ in older programs.  This warning is on b
- Make all warnings into hard errors.  Source code which triggers warnings
- will be rejected.
- 
-+@item -Werror-maybe-reset
-+@opindex Werror-maybe-reset
-+Act like @samp{-Wno-error} if the @env{GCC_NO_WERROR} environment
-+variable is set to anything other than 0 or empty.
-+
- @item -Wsystem-headers
- @opindex Wsystem-headers
- Issue warnings for code in system headers.  These are normally unhelpful
---- a/gcc/doc/invoke.texi
-+++ b/gcc/doc/invoke.texi
-@@ -222,7 +222,7 @@ Objective-C and Objective-C++ Dialects}.
- -Wc++-compat -Wcast-align  -Wcast-qual  -Wchar-subscripts  -Wcomment @gol
- -Wconversion  -Wno-deprecated-declarations @gol
- -Wdisabled-optimization  -Wno-div-by-zero  -Wno-endif-labels @gol
---Werror  -Werror-implicit-function-declaration @gol
-+-Werror -Werror-maybe-reset -Werror-implicit-function-declaration @gol
- -Wfatal-errors  -Wfloat-equal  -Wformat  -Wformat=2 @gol
- -Wno-format-extra-args -Wformat-nonliteral @gol
- -Wformat-security  -Wformat-y2k @gol
-@@ -3390,6 +3390,22 @@ This option is only supported for C and 
- @opindex Werror
- Make all warnings into errors.
- 
-+@item -Werror-maybe-reset
-+@opindex Werror-maybe-reset
-+Act like @samp{-Wno-error} if the @env{GCC_NO_WERROR} environment
-+variable is set to anything other than 0 or empty.
-+
-+@item -fhonour-copts
-+@opindex fhonour-copts
-+If @env{GCC_HONOUR_COPTS} is set to 1, abort if this option is not
-+given at least once, and warn if it is given more than once.
-+If @env{GCC_HONOUR_COPTS} is set to 2, abort if this option is not
-+given exactly once.
-+If @env{GCC_HONOUR_COPTS} is set to 0 or unset, warn if this option
-+is not given exactly once.
-+The warning is quelled if @env{GCC_HONOUR_COPTS} is set to @samp{s}.
-+This flag and environment variable only affect the C language.
-+
- @item -Wstack-protector
- This option is only active when @option{-fstack-protector} is active.  It
- warns about functions that will not be protected against stack smashing.
-@@ -4679,7 +4695,7 @@ erroneously read data to propagate withi
- Perform the optimizations of loop strength reduction and
- elimination of iteration variables.
- 
--Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
-+Enabled at levels @option{-O3}.
- 
- @item -fthread-jumps
- @opindex fthread-jumps
-@@ -4826,7 +4842,7 @@ safely dereference null pointers.  Use
- @option{-fno-delete-null-pointer-checks} to disable this optimization
- for programs which depend on that behavior.
- 
--Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
-+Enabled at levels @option{-O3}.
- 
- @item -fexpensive-optimizations
- @opindex fexpensive-optimizations
-@@ -5234,7 +5250,7 @@ node, an alias set for the node.  Nodes 
- allowed to alias.  For an example, see the C front-end function
- @code{c_get_alias_set}.
- 
--Enabled at levels @option{-O2}, @option{-O3}, @option{-Os}.
-+Enabled at levels @option{-O3}.
- 
- @item -falign-functions
- @itemx -falign-functions=@var{n}
---- a/gcc/java/jvspec.c
-+++ b/gcc/java/jvspec.c
-@@ -620,6 +620,7 @@ lang_specific_pre_link (void)
-      class name.  Append dummy `.c' that can be stripped by set_input so %b
-      is correct.  */ 
-   set_input (concat (main_class_name, "main.c", NULL));
-+  putenv ("GCC_HONOUR_COPTS=s"); /* XXX hack!  */
-   err = do_spec (jvgenmain_spec);
-   if (err == 0)
-     {
diff --git a/toolchain/gcc/patches/4.1.2/910-soft-float.patch b/toolchain/gcc/patches/4.1.2/910-soft-float.patch
deleted file mode 100644
index 66cb3992aa..0000000000
--- a/toolchain/gcc/patches/4.1.2/910-soft-float.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/gcc/config/arm/linux-elf.h
-+++ b/gcc/config/arm/linux-elf.h
-@@ -63,7 +63,7 @@
-    %{shared:-lc} \
-    %{!shared:%{profile:-lc_p}%{!profile:-lc}}"
- 
--#define LIBGCC_SPEC "%{msoft-float:-lfloat} %{mfloat-abi=soft*:-lfloat} -lgcc"
-+#define LIBGCC_SPEC "-lgcc"
- 
- #ifdef USE_UCLIBC
- #define LINUX_TARGET_INTERPRETER "/lib/ld-uClibc.so.0"
---- a/gcc/config/arm/t-linux
-+++ b/gcc/config/arm/t-linux
-@@ -4,7 +4,10 @@ TARGET_LIBGCC2_CFLAGS = -fomit-frame-poi
- LIBGCC2_DEBUG_CFLAGS = -g0
- 
- LIB1ASMSRC = arm/lib1funcs.asm
--LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx
-+LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx \
-+      _negdf2 _addsubdf3 _muldivdf3 _cmpdf2 _unorddf2 _fixdfsi _fixunsdfsi \
-+      _truncdfsf2 _negsf2 _addsubsf3 _muldivsf3 _cmpsf2 _unordsf2 \
-+      _fixsfsi _fixunssfsi _floatdidf _floatundidf _floatdisf _floatundisf
- 
- # MULTILIB_OPTIONS = mhard-float/msoft-float
- # MULTILIB_DIRNAMES = hard-float soft-float
diff --git a/toolchain/gcc/patches/4.1.2/953-bug_33256.patch b/toolchain/gcc/patches/4.1.2/953-bug_33256.patch
deleted file mode 100644
index 6388e47b0a..0000000000
--- a/toolchain/gcc/patches/4.1.2/953-bug_33256.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-http://gcc.gnu.org/bugzilla/show_bug.cgi?id=33256
-
---- a/gcc/config/mips/mips.c
-+++ b/gcc/config/mips/mips.c
-@@ -1252,6 +1252,20 @@ mips_split_const (rtx x, rtx *base, HOST
-   *base = x;
- }
- 
-+/* Classify symbolic expression X, given that it appears in context
-+   CONTEXT.  */
-+
-+static enum mips_symbol_type
-+mips_classify_symbolic_expression (rtx x)
-+{
-+  HOST_WIDE_INT offset;
-+
-+  mips_split_const (x, &x, &offset);
-+  if (UNSPEC_ADDRESS_P (x))
-+    return UNSPEC_ADDRESS_TYPE (x);
-+
-+  return mips_classify_symbol (x);
-+}
- 
- /* Return true if SYMBOL is a SYMBOL_REF and OFFSET + SYMBOL points
-    to the same object as SYMBOL.  */
-@@ -1493,8 +1507,17 @@ mips_classify_address (struct mips_addre
-       info->type = ADDRESS_LO_SUM;
-       info->reg = XEXP (x, 0);
-       info->offset = XEXP (x, 1);
-+      /* We have to trust the creator of the LO_SUM to do something vaguely
-+	 sane.  Target-independent code that creates a LO_SUM should also
-+	 create and verify the matching HIGH.  Target-independent code that
-+	 adds an offset to a LO_SUM must prove that the offset will not
-+	 induce a carry.  Failure to do either of these things would be
-+	 a bug, and we are not required to check for it here.  The MIPS
-+	 backend itself should only create LO_SUMs for valid symbolic
-+	 constants, with the high part being either a HIGH or a copy
-+	 of _gp. */
-+      info->symbol_type = mips_classify_symbolic_expression (info->offset);
-       return (mips_valid_base_register_p (info->reg, mode, strict)
--	      && mips_symbolic_constant_p (info->offset, &info->symbol_type)
- 	      && mips_symbolic_address_p (info->symbol_type, mode)
- 	      && mips_lo_relocs[info->symbol_type] != 0);
- 
-@@ -5575,7 +5598,8 @@ print_operand_reloc (FILE *file, rtx op,
-   rtx base;
-   HOST_WIDE_INT offset;
- 
--  if (!mips_symbolic_constant_p (op, &symbol_type) || relocs[symbol_type] == 0)
-+  symbol_type = mips_classify_symbolic_expression (op);
-+  if (relocs[symbol_type] == 0)
-     fatal_insn ("PRINT_OPERAND, invalid operand for relocation", op);
- 
-   /* If OP uses an UNSPEC address, we want to print the inner symbol.  */