diff options
| author | Stijn Tintel <stijn@linux-ipv6.be> | 2018-07-31 05:11:07 +0300 |
|---|---|---|
| committer | Stijn Tintel <stijn@linux-ipv6.be> | 2018-07-31 05:11:07 +0300 |
| commit | 22b9f99b87fa1ff991180cabf02dd04d1bddce2b (patch) | |
| tree | 4675ce75a330278a46b34522f99d9e5ca6b9e8d3 /target | |
| parent | c89195eb25a4dfd093f9d0d3b3adac896bb471ad (diff) | |
| download | upstream-22b9f99b87fa1ff991180cabf02dd04d1bddce2b.tar.gz upstream-22b9f99b87fa1ff991180cabf02dd04d1bddce2b.tar.bz2 upstream-22b9f99b87fa1ff991180cabf02dd04d1bddce2b.zip | |
kernel: bump 4.14 to 4.14.59
Drop patch that was superseded upstream:
ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
Drop upstreamed patches:
- apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch
- apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch
- ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
- brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
- brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
- generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch
- generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch
- generic/pending/900-gen_stats-fix-netlink-stats-padding.patch
In 4.14.55, a patch was introduced that breaks ext4 images in some
cases. The newly introduced patch
backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch
addresses this breakage.
Fixes the following CVEs:
- CVE-2018-10876
- CVE-2018-10877
- CVE-2018-10879
- CVE-2018-10880
- CVE-2018-10881
- CVE-2018-10882
- CVE-2018-10883
Compile-tested: ath79, octeon, x86/64
Runtime-tested: ath79, octeon, x86/64
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Diffstat (limited to 'target')
58 files changed, 176 insertions, 827 deletions
diff --git a/target/linux/apm821xx/patches-4.14/020-0001-crypto-crypto4xx-remove-bad-list_del.patch b/target/linux/apm821xx/patches-4.14/020-0001-crypto-crypto4xx-remove-bad-list_del.patch deleted file mode 100644 index 8df0937e4d..0000000000 --- a/target/linux/apm821xx/patches-4.14/020-0001-crypto-crypto4xx-remove-bad-list_del.patch +++ /dev/null @@ -1,32 +0,0 @@ -From a728a196d253530f17da5c86dc7dfbe58c5f7094 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@googlemail.com> -Date: Fri, 25 Aug 2017 15:47:14 +0200 -Subject: [PATCH 01/25] crypto: crypto4xx - remove bad list_del - -alg entries are only added to the list, after the registration -was successful. If the registration failed, it was never added -to the list in the first place. - -Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> -Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> ---- - drivers/crypto/amcc/crypto4xx_core.c | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - ---- a/drivers/crypto/amcc/crypto4xx_core.c -+++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -1033,12 +1033,10 @@ int crypto4xx_register_alg(struct crypto - break; - } - -- if (rc) { -- list_del(&alg->entry); -+ if (rc) - kfree(alg); -- } else { -+ else - list_add_tail(&alg->entry, &sec_dev->alg_list); -- } - } - - return 0; diff --git a/target/linux/apm821xx/patches-4.14/020-0002-crypto-crypto4xx-remove-unused-definitions-and-write.patch b/target/linux/apm821xx/patches-4.14/020-0002-crypto-crypto4xx-remove-unused-definitions-and-write.patch index 5983246344..466f0a0a78 100644 --- a/target/linux/apm821xx/patches-4.14/020-0002-crypto-crypto4xx-remove-unused-definitions-and-write.patch +++ b/target/linux/apm821xx/patches-4.14/020-0002-crypto-crypto4xx-remove-unused-definitions-and-write.patch @@ -67,7 +67,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> --- a/drivers/crypto/amcc/crypto4xx_core.c +++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -962,7 +962,7 @@ u32 crypto4xx_build_pd(struct crypto_asy +@@ -964,7 +964,7 @@ u32 crypto4xx_build_pd(struct crypto_asy sa->sa_command_1.bf.hash_crypto_offset = 0; pd->pd_ctl.w = ctx->pd_ctl; diff --git a/target/linux/apm821xx/patches-4.14/020-0003-crypto-crypto4xx-set-CRYPTO_ALG_KERN_DRIVER_ONLY-fla.patch b/target/linux/apm821xx/patches-4.14/020-0003-crypto-crypto4xx-set-CRYPTO_ALG_KERN_DRIVER_ONLY-fla.patch index e50a418284..c195b88c2f 100644 --- a/target/linux/apm821xx/patches-4.14/020-0003-crypto-crypto4xx-set-CRYPTO_ALG_KERN_DRIVER_ONLY-fla.patch +++ b/target/linux/apm821xx/patches-4.14/020-0003-crypto-crypto4xx-set-CRYPTO_ALG_KERN_DRIVER_ONLY-fla.patch @@ -18,7 +18,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> --- a/drivers/crypto/amcc/crypto4xx_core.c +++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -1114,7 +1114,9 @@ struct crypto4xx_alg_common crypto4xx_al +@@ -1116,7 +1116,9 @@ struct crypto4xx_alg_common crypto4xx_al .cra_name = "cbc(aes)", .cra_driver_name = "cbc-aes-ppc4xx", .cra_priority = CRYPTO4XX_CRYPTO_PRIORITY, diff --git a/target/linux/apm821xx/patches-4.14/020-0005-crypto-crypto4xx-remove-double-assignment-of-pd_uinf.patch b/target/linux/apm821xx/patches-4.14/020-0005-crypto-crypto4xx-remove-double-assignment-of-pd_uinf.patch index 4fc3617576..03c402d975 100644 --- a/target/linux/apm821xx/patches-4.14/020-0005-crypto-crypto4xx-remove-double-assignment-of-pd_uinf.patch +++ b/target/linux/apm821xx/patches-4.14/020-0005-crypto-crypto4xx-remove-double-assignment-of-pd_uinf.patch @@ -14,7 +14,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> --- a/drivers/crypto/amcc/crypto4xx_core.c +++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -1079,7 +1079,6 @@ static void crypto4xx_bh_tasklet_cb(unsi +@@ -1081,7 +1081,6 @@ static void crypto4xx_bh_tasklet_cb(unsi pd->pd_ctl.bf.pe_done = 0; crypto4xx_pd_done(core_dev->dev, tail); crypto4xx_put_pd_to_pdr(core_dev->dev, tail); diff --git a/target/linux/apm821xx/patches-4.14/020-0008-crypto-crypto4xx-enable-AES-RFC3686-ECB-CFB-and-OFB-.patch b/target/linux/apm821xx/patches-4.14/020-0008-crypto-crypto4xx-enable-AES-RFC3686-ECB-CFB-and-OFB-.patch index 9977c60d26..d19a41ec13 100644 --- a/target/linux/apm821xx/patches-4.14/020-0008-crypto-crypto4xx-enable-AES-RFC3686-ECB-CFB-and-OFB-.patch +++ b/target/linux/apm821xx/patches-4.14/020-0008-crypto-crypto4xx-enable-AES-RFC3686-ECB-CFB-and-OFB-.patch @@ -109,7 +109,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> #include <crypto/sha.h> #include "crypto4xx_reg_def.h" #include "crypto4xx_core.h" -@@ -1133,6 +1134,103 @@ struct crypto4xx_alg_common crypto4xx_al +@@ -1135,6 +1136,103 @@ struct crypto4xx_alg_common crypto4xx_al } } }}, diff --git a/target/linux/apm821xx/patches-4.14/020-0009-crypto-crypto4xx-refactor-crypto4xx_copy_pkt_to_dst.patch b/target/linux/apm821xx/patches-4.14/020-0009-crypto-crypto4xx-refactor-crypto4xx_copy_pkt_to_dst.patch index c6ccade8c1..e74ed7f56b 100644 --- a/target/linux/apm821xx/patches-4.14/020-0009-crypto-crypto4xx-refactor-crypto4xx_copy_pkt_to_dst.patch +++ b/target/linux/apm821xx/patches-4.14/020-0009-crypto-crypto4xx-refactor-crypto4xx_copy_pkt_to_dst.patch @@ -27,7 +27,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> #include "crypto4xx_reg_def.h" #include "crypto4xx_core.h" #include "crypto4xx_sa.h" -@@ -481,111 +482,44 @@ static inline struct ce_sd *crypto4xx_ge +@@ -483,111 +484,44 @@ static inline struct ce_sd *crypto4xx_ge return (struct ce_sd *)(dev->sdr + sizeof(struct ce_sd) * idx); } diff --git a/target/linux/apm821xx/patches-4.14/020-0010-crypto-crypto4xx-replace-crypto4xx_dev-s-scatter_buf.patch b/target/linux/apm821xx/patches-4.14/020-0010-crypto-crypto4xx-replace-crypto4xx_dev-s-scatter_buf.patch index 90a6dab2d7..5ca3faa4dc 100644 --- a/target/linux/apm821xx/patches-4.14/020-0010-crypto-crypto4xx-replace-crypto4xx_dev-s-scatter_buf.patch +++ b/target/linux/apm821xx/patches-4.14/020-0010-crypto-crypto4xx-replace-crypto4xx_dev-s-scatter_buf.patch @@ -17,7 +17,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> --- a/drivers/crypto/amcc/crypto4xx_core.c +++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -394,10 +394,9 @@ static u32 crypto4xx_build_sdr(struct cr +@@ -396,10 +396,9 @@ static u32 crypto4xx_build_sdr(struct cr if (!dev->sdr) return -ENOMEM; @@ -29,7 +29,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> &dev->scatter_buffer_pa, GFP_ATOMIC); if (!dev->scatter_buffer_va) { dma_free_coherent(dev->core_dev->device, -@@ -410,7 +409,7 @@ static u32 crypto4xx_build_sdr(struct cr +@@ -412,7 +411,7 @@ static u32 crypto4xx_build_sdr(struct cr for (i = 0; i < PPC4XX_NUM_SD; i++) { sd_array[i].ptr = dev->scatter_buffer_pa + @@ -38,9 +38,9 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> } return 0; -@@ -425,7 +424,7 @@ static void crypto4xx_destroy_sdr(struct +@@ -427,7 +426,7 @@ static void crypto4xx_destroy_sdr(struct - if (dev->scatter_buffer_va != NULL) + if (dev->scatter_buffer_va) dma_free_coherent(dev->core_dev->device, - dev->scatter_buffer_size * PPC4XX_NUM_SD, + PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD, diff --git a/target/linux/apm821xx/patches-4.14/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch b/target/linux/apm821xx/patches-4.14/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch deleted file mode 100644 index 837fbdc547..0000000000 --- a/target/linux/apm821xx/patches-4.14/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 5d59ad6eea82ef8df92b4109615a0dde9d8093e9 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@googlemail.com> -Date: Fri, 25 Aug 2017 15:47:24 +0200 -Subject: [PATCH 11/25] crypto: crypto4xx - fix crypto4xx_build_pdr, - crypto4xx_build_sdr leak - -If one of the later memory allocations in rypto4xx_build_pdr() -fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed. - -crypto4xx_build_sdr() has the same issue with dev->sdr. - -Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> -Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> ---- - drivers/crypto/amcc/crypto4xx_core.c | 17 +++++++++-------- - 1 file changed, 9 insertions(+), 8 deletions(-) - ---- a/drivers/crypto/amcc/crypto4xx_core.c -+++ b/drivers/crypto/amcc/crypto4xx_core.c -@@ -209,7 +209,7 @@ static u32 crypto4xx_build_pdr(struct cr - dev->pdr_pa); - return -ENOMEM; - } -- memset(dev->pdr, 0, sizeof(struct ce_pd) * PPC4XX_NUM_PD); -+ memset(dev->pdr, 0, sizeof(struct ce_pd) * PPC4XX_NUM_PD); - dev->shadow_sa_pool = dma_alloc_coherent(dev->core_dev->device, - 256 * PPC4XX_NUM_PD, - &dev->shadow_sa_pool_pa, -@@ -242,13 +242,15 @@ static u32 crypto4xx_build_pdr(struct cr - - static void crypto4xx_destroy_pdr(struct crypto4xx_device *dev) - { -- if (dev->pdr != NULL) -+ if (dev->pdr) - dma_free_coherent(dev->core_dev->device, - sizeof(struct ce_pd) * PPC4XX_NUM_PD, - dev->pdr, dev->pdr_pa); -+ - if (dev->shadow_sa_pool) - dma_free_coherent(dev->core_dev->device, 256 * PPC4XX_NUM_PD, - dev->shadow_sa_pool, dev->shadow_sa_pool_pa); -+ - if (dev->shadow_sr_pool) - dma_free_coherent(dev->core_dev->device, - sizeof(struct sa_state_record) * PPC4XX_NUM_PD, -@@ -417,12 +419,12 @@ static u32 crypto4xx_build_sdr(struct cr - - static void crypto4xx_destroy_sdr(struct crypto4xx_device *dev) - { -- if (dev->sdr != NULL) -+ if (dev->sdr) - dma_free_coherent(dev->core_dev->device, - sizeof(struct ce_sd) * PPC4XX_NUM_SD, - dev->sdr, dev->sdr_pa); - -- if (dev->scatter_buffer_va != NULL) -+ if (dev->scatter_buffer_va) - dma_free_coherent(dev->core_dev->device, - PPC4XX_SD_BUFFER_SIZE * PPC4XX_NUM_SD, - dev->scatter_buffer_va, -@@ -1223,7 +1225,7 @@ static int crypto4xx_probe(struct platfo - - rc = crypto4xx_build_gdr(core_dev->dev); - if (rc) -- goto err_build_gdr; -+ goto err_build_pdr; - - rc = crypto4xx_build_sdr(core_dev->dev); - if (rc) -@@ -1266,12 +1268,11 @@ err_iomap: - err_request_irq: - irq_dispose_mapping(core_dev->irq); - tasklet_kill(&core_dev->tasklet); -- crypto4xx_destroy_sdr(core_dev->dev); - err_build_sdr: -+ crypto4xx_destroy_sdr(core_dev->dev); - crypto4xx_destroy_gdr(core_dev->dev); --err_build_gdr: -- crypto4xx_destroy_pdr(core_dev->dev); - err_build_pdr: -+ crypto4xx_destroy_pdr(core_dev->dev); - kfree(core_dev->dev); - err_alloc_dev: - kfree(core_dev); diff --git a/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch index 3545b99aab..1e781b5dae 100644 --- a/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch +++ b/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch @@ -44,7 +44,7 @@ produce a noisy warning. hcd->msi_enabled = 1; --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1850,6 +1850,7 @@ struct xhci_hcd { +@@ -1854,6 +1854,7 @@ struct xhci_hcd { /* support xHCI 0.96 spec USB2 software LPM */ unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ diff --git a/target/linux/ath79/patches-4.14/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch b/target/linux/ath79/patches-4.14/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch deleted file mode 100644 index 85ee24c208..0000000000 --- a/target/linux/ath79/patches-4.14/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 54204ef3edbb1aa2390cabba61fe185a12cc39f0 Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@nbd.name> -Date: Tue, 6 Mar 2018 08:35:44 +0100 -Subject: [PATCH 11/27] MIPS: ath79: fix register address in - ath79_ddr_wb_flush() - -ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets -need to be a multiple of 4. - -Cc: Alban Bedel <albeu@free.fr> -Fixes: 24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface") -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - arch/mips/ath79/common.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init); - - void ath79_ddr_wb_flush(u32 reg) - { -- void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg; -+ void __iomem *flush_reg = ath79_ddr_wb_flush_base + (reg * 4); - - /* Flush the DDR write buffer. */ - __raw_writel(0x1, flush_reg); diff --git a/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch index 9897679a62..fc9dce2d85 100644 --- a/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch +++ b/target/linux/ath79/patches-4.14/910-unaligned_access_hacks.patch @@ -250,7 +250,7 @@ &sin->sin6_addr); sin->sin6_scope_id = 0; } -@@ -833,12 +833,12 @@ int ip6_datagram_send_ctl(struct net *ne +@@ -836,12 +836,12 @@ int ip6_datagram_send_ctl(struct net *ne } if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { @@ -327,7 +327,7 @@ return neigh_create(&arp_tbl, pkey, dev); --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c -@@ -449,48 +449,53 @@ static void tcp_options_write(__be32 *pt +@@ -454,48 +454,53 @@ static void tcp_options_write(__be32 *pt u16 options = opts->options; /* mungable copy */ if (unlikely(OPTION_MD5 & options)) { @@ -404,7 +404,7 @@ } if (unlikely(opts->num_sack_blocks)) { -@@ -498,16 +503,17 @@ static void tcp_options_write(__be32 *pt +@@ -503,16 +508,17 @@ static void tcp_options_write(__be32 *pt tp->duplicate_sack : tp->selective_acks; int this_sack; @@ -428,7 +428,7 @@ } tp->rx_opt.dsack = 0; -@@ -520,13 +526,14 @@ static void tcp_options_write(__be32 *pt +@@ -525,13 +531,14 @@ static void tcp_options_write(__be32 *pt if (foc->exp) { len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len; @@ -737,7 +737,7 @@ EXPORT_SYMBOL(xfrm_parse_spi); --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c -@@ -3844,14 +3844,16 @@ static bool tcp_parse_aligned_timestamp( +@@ -3854,14 +3854,16 @@ static bool tcp_parse_aligned_timestamp( { const __be32 *ptr = (const __be32 *)(th + 1); diff --git a/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch index 3bee392f4f..ac622010ff 100644 --- a/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ b/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch @@ -127,7 +127,7 @@ it on BCM4708 family. /* --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1831,6 +1831,7 @@ struct xhci_hcd { +@@ -1835,6 +1835,7 @@ struct xhci_hcd { #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26) #define XHCI_U2_DISABLE_WAKE (1 << 27) #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28) diff --git a/target/linux/brcm47xx/patches-4.14/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-4.14/830-huawei_e970_support.patch index 5d40fe6541..b6150ed8fd 100644 --- a/target/linux/brcm47xx/patches-4.14/830-huawei_e970_support.patch +++ b/target/linux/brcm47xx/patches-4.14/830-huawei_e970_support.patch @@ -8,7 +8,7 @@ #include <asm/bootinfo.h> #include <asm/idle.h> #include <asm/prom.h> -@@ -231,6 +232,33 @@ static struct fixed_phy_status bcm47xx_f +@@ -225,6 +226,33 @@ static struct fixed_phy_status bcm47xx_f .duplex = DUPLEX_FULL, }; @@ -42,7 +42,7 @@ static int __init bcm47xx_register_bus_complete(void) { switch (bcm47xx_bus_type) { -@@ -250,6 +278,7 @@ static int __init bcm47xx_register_bus_c +@@ -244,6 +272,7 @@ static int __init bcm47xx_register_bus_c bcm47xx_workarounds(); fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1); diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch deleted file mode 100644 index bd66e72c91..0000000000 --- a/target/linux/brcm63xx/patches-4.14/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch +++ /dev/null @@ -1,101 +0,0 @@ -From d0423d3e4fa7ae305729cb50369427f075ccb279 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Sat, 25 Feb 2017 12:41:28 +0100 -Subject: [PATCH 1/6] bcm63xx_enet: correct clock usage - -Check the return code of prepare_enable and change one last instance of -enable only to prepare_enable. Also properly disable and release the -clock in error paths and on remove for enetsw. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 31 +++++++++++++++++++++------- - 1 file changed, 23 insertions(+), 8 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1773,7 +1773,9 @@ static int bcm_enet_probe(struct platfor - ret = PTR_ERR(priv->mac_clk); - goto out; - } -- clk_prepare_enable(priv->mac_clk); -+ ret = clk_prepare_enable(priv->mac_clk); -+ if (ret) -+ goto out_put_clk_mac; - - /* initialize default and fetch platform data */ - priv->rx_ring_size = BCMENET_DEF_RX_DESC; -@@ -1805,9 +1807,11 @@ static int bcm_enet_probe(struct platfor - if (IS_ERR(priv->phy_clk)) { - ret = PTR_ERR(priv->phy_clk); - priv->phy_clk = NULL; -- goto out_put_clk_mac; -+ goto out_disable_clk_mac; - } -- clk_prepare_enable(priv->phy_clk); -+ ret = clk_prepare_enable(priv->phy_clk); -+ if (ret) -+ goto out_put_clk_phy; - } - - /* do minimal hardware init to be able to probe mii bus */ -@@ -1901,13 +1905,16 @@ out_free_mdio: - out_uninit_hw: - /* turn off mdc clock */ - enet_writel(priv, 0, ENET_MIISC_REG); -- if (priv->phy_clk) { -+ if (priv->phy_clk) - clk_disable_unprepare(priv->phy_clk); -+ -+out_put_clk_phy: -+ if (priv->phy_clk) - clk_put(priv->phy_clk); -- } - --out_put_clk_mac: -+out_disable_clk_mac: - clk_disable_unprepare(priv->mac_clk); -+out_put_clk_mac: - clk_put(priv->mac_clk); - out: - free_netdev(dev); -@@ -2752,7 +2759,9 @@ static int bcm_enetsw_probe(struct platf - ret = PTR_ERR(priv->mac_clk); - goto out_unmap; - } -- clk_enable(priv->mac_clk); -+ ret = clk_prepare_enable(priv->mac_clk); -+ if (ret) -+ goto out_put_clk; - - priv->rx_chan = 0; - priv->tx_chan = 1; -@@ -2773,7 +2782,7 @@ static int bcm_enetsw_probe(struct platf - - ret = register_netdev(dev); - if (ret) -- goto out_put_clk; -+ goto out_disable_clk; - - netif_carrier_off(dev); - platform_set_drvdata(pdev, dev); -@@ -2782,6 +2791,9 @@ static int bcm_enetsw_probe(struct platf - - return 0; - -+out_disable_clk: -+ clk_disable_unprepare(priv->mac_clk); -+ - out_put_clk: - clk_put(priv->mac_clk); - -@@ -2813,6 +2825,9 @@ static int bcm_enetsw_remove(struct plat - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - -+ clk_disable_unprepare(priv->mac_clk); -+ clk_put(priv->mac_clk); -+ - free_netdev(dev); - return 0; - } diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch deleted file mode 100644 index 22b3a732f9..0000000000 --- a/target/linux/brcm63xx/patches-4.14/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 23d94cb855b6f4f0ee1c01679224472104ac6440 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Sat, 30 Sep 2017 14:10:18 +0200 -Subject: [PATCH 2/6] bcm63xx_enet: do not write to random DMA channel on - BCM6345 - -The DMA controller regs actually point to DMA channel 0, so the write to -ENETDMA_CFG_REG will actually modify a random DMA channel. - -Since DMA controller registers do not exist on BCM6345, guard the write -with the usual check for dma_has_sram. - -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1062,7 +1062,8 @@ static int bcm_enet_open(struct net_devi - val = enet_readl(priv, ENET_CTL_REG); - val |= ENET_CTL_ENABLE_MASK; - enet_writel(priv, val, ENET_CTL_REG); -- enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); -+ if (priv->dma_has_sram) -+ enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); - enet_dmac_writel(priv, priv->dma_chan_en_mask, - ENETDMAC_CHANCFG, priv->rx_chan); - diff --git a/target/linux/generic/backport-4.14/012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch b/target/linux/generic/backport-4.14/012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch index 6b56a68b31..892b65fbc0 100644 --- a/target/linux/generic/backport-4.14/012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch +++ b/target/linux/generic/backport-4.14/012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch @@ -84,7 +84,7 @@ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h -@@ -343,3 +343,28 @@ +@@ -358,3 +358,28 @@ * code */ #define uninitialized_var(x) x = x diff --git a/target/linux/generic/backport-4.14/025-tcp-allow-drivers-to-tweak-TSQ-logic.patch b/target/linux/generic/backport-4.14/025-tcp-allow-drivers-to-tweak-TSQ-logic.patch index 89117bd874..d9215505ee 100644 --- a/target/linux/generic/backport-4.14/025-tcp-allow-drivers-to-tweak-TSQ-logic.patch +++ b/target/linux/generic/backport-4.14/025-tcp-allow-drivers-to-tweak-TSQ-logic.patch @@ -65,7 +65,7 @@ Cc: Kir Kolyshkin <kir@openvz.org> * Before updating sk_refcnt, we must commit prior changes to memory --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c -@@ -1671,7 +1671,7 @@ u32 tcp_tso_autosize(const struct sock * +@@ -1683,7 +1683,7 @@ u32 tcp_tso_autosize(const struct sock * { u32 bytes, segs; @@ -74,7 +74,7 @@ Cc: Kir Kolyshkin <kir@openvz.org> sk->sk_gso_max_size - 1 - MAX_TCP_HEADER); /* Goal is to send at least one packet per ms, -@@ -2172,7 +2172,7 @@ static bool tcp_small_queue_check(struct +@@ -2184,7 +2184,7 @@ static bool tcp_small_queue_check(struct { unsigned int limit; diff --git a/target/linux/generic/backport-4.14/030-v4.17-0001-usb-dwc2-add-support-for-host-mode-external-vbus-sup.patch b/target/linux/generic/backport-4.14/030-v4.17-0001-usb-dwc2-add-support-for-host-mode-external-vbus-sup.patch index 1154150259..dc85efd1e1 100644 --- a/target/linux/generic/backport-4.14/030-v4.17-0001-usb-dwc2-add-support-for-host-mode-external-vbus-sup.patch +++ b/target/linux/generic/backport-4.14/030-v4.17-0001-usb-dwc2-add-support-for-host-mode-external-vbus-sup.patch @@ -63,7 +63,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> /** * dwc2_enable_host_interrupts() - Enables the Host mode interrupts * -@@ -3276,6 +3293,7 @@ static void dwc2_conn_id_status_change(s +@@ -3278,6 +3295,7 @@ static void dwc2_conn_id_status_change(s /* B-Device connector (Device Mode) */ if (gotgctl & GOTGCTL_CONID_B) { @@ -71,7 +71,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> /* Wait for switch to device mode */ dev_dbg(hsotg->dev, "connId B\n"); if (hsotg->bus_suspended) { -@@ -4382,6 +4400,9 @@ static int _dwc2_hcd_start(struct usb_hc +@@ -4384,6 +4402,9 @@ static int _dwc2_hcd_start(struct usb_hc } spin_unlock_irqrestore(&hsotg->lock, flags); @@ -81,7 +81,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> return 0; } -@@ -4409,6 +4430,8 @@ static void _dwc2_hcd_stop(struct usb_hc +@@ -4411,6 +4432,8 @@ static void _dwc2_hcd_stop(struct usb_hc clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); spin_unlock_irqrestore(&hsotg->lock, flags); @@ -90,7 +90,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> usleep_range(1000, 3000); } -@@ -4445,6 +4468,7 @@ static int _dwc2_hcd_suspend(struct usb_ +@@ -4447,6 +4470,7 @@ static int _dwc2_hcd_suspend(struct usb_ hprt0 |= HPRT0_SUSP; hprt0 &= ~HPRT0_PWR; dwc2_writel(hprt0, hsotg->regs + HPRT0); @@ -98,7 +98,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> } /* Enter hibernation */ -@@ -4525,6 +4549,8 @@ static int _dwc2_hcd_resume(struct usb_h +@@ -4527,6 +4551,8 @@ static int _dwc2_hcd_resume(struct usb_h spin_unlock_irqrestore(&hsotg->lock, flags); dwc2_port_resume(hsotg); } else { diff --git a/target/linux/generic/backport-4.14/030-v4.17-0002-usb-dwc2-dwc2_vbus_supply_init-fix-error-check.patch b/target/linux/generic/backport-4.14/030-v4.17-0002-usb-dwc2-dwc2_vbus_supply_init-fix-error-check.patch index f860cde0f6..8dac0bffc2 100644 --- a/target/linux/generic/backport-4.14/030-v4.17-0002-usb-dwc2-dwc2_vbus_supply_init-fix-error-check.patch +++ b/target/linux/generic/backport-4.14/030-v4.17-0002-usb-dwc2-dwc2_vbus_supply_init-fix-error-check.patch @@ -42,7 +42,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> return regulator_enable(hsotg->vbus_supply); } -@@ -4401,9 +4406,7 @@ static int _dwc2_hcd_start(struct usb_hc +@@ -4403,9 +4408,7 @@ static int _dwc2_hcd_start(struct usb_hc spin_unlock_irqrestore(&hsotg->lock, flags); diff --git a/target/linux/generic/backport-4.14/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch b/target/linux/generic/backport-4.14/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch deleted file mode 100644 index 06d00886f1..0000000000 --- a/target/linux/generic/backport-4.14/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch +++ /dev/null @@ -1,172 +0,0 @@ -From 9bbe60a67be5a1c6f79b3c9be5003481a50529ff Mon Sep 17 00:00:00 2001 -From: David Woodhouse <dwmw2@infradead.org> -Date: Sat, 16 Jun 2018 11:55:44 +0100 -Subject: atm: Preserve value of skb->truesize when accounting to vcc -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on -which they are to be sent. But it doesn't take ownership of those -packets from the sock (if any) which originally owned them. They should -remain owned by their actual sender until they've left the box. - -There's a hack in pskb_expand_head() to avoid adjusting skb->truesize -for certain skbs, precisely to avoid messing up sk_wmem_alloc -accounting. Ideally that hack would cover the ATM use case too, but it -doesn't — skbs which aren't owned by any sock, for example PPP control -frames, still get their truesize adjusted when the low-level ATM driver -adds headroom. - -This has always been an issue, it seems. The truesize of a packet -increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't -for normal traffic, only for control frames. So I think we just got away -with it, and we probably needed to send 2GiB of LCP echo frames before -the misaccounting would ever have caused a problem and caused -atm_may_send() to start refusing packets. - -Commit 14afee4b609 ("net: convert sock.sk_wmem_alloc from atomic_t to -refcount_t") did exactly what it was intended to do, and turned this -mostly-theoretical problem into a real one, causing PPPoATM to fail -immediately as sk_wmem_alloc underflows and atm_may_send() *immediately* -starts refusing to allow new packets. - -The least intrusive solution to this problem is to stash the value of -skb->truesize that was accounted to the VCC, in a new member of the -ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that -value instead of the then-current value of skb->truesize. - -Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") -Signed-off-by: David Woodhouse <dwmw2@infradead.org> -Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> -Signed-off-by: David S. Miller <davem@davemloft.net> ---- - include/linux/atmdev.h | 15 +++++++++++++++ - net/atm/br2684.c | 3 +-- - net/atm/clip.c | 3 +-- - net/atm/common.c | 3 +-- - net/atm/lec.c | 3 +-- - net/atm/mpc.c | 3 +-- - net/atm/pppoatm.c | 3 +-- - net/atm/raw.c | 4 ++-- - 8 files changed, 23 insertions(+), 14 deletions(-) - ---- a/include/linux/atmdev.h -+++ b/include/linux/atmdev.h -@@ -214,6 +214,7 @@ struct atmphy_ops { - struct atm_skb_data { - struct atm_vcc *vcc; /* ATM VCC */ - unsigned long atm_options; /* ATM layer options */ -+ unsigned int acct_truesize; /* truesize accounted to vcc */ - }; - - #define VCC_HTABLE_SIZE 32 -@@ -241,6 +242,20 @@ void vcc_insert_socket(struct sock *sk); - - void atm_dev_release_vccs(struct atm_dev *dev); - -+static inline void atm_account_tx(struct atm_vcc *vcc, struct sk_buff *skb) -+{ -+ /* -+ * Because ATM skbs may not belong to a sock (and we don't -+ * necessarily want to), skb->truesize may be adjusted, -+ * escaping the hack in pskb_expand_head() which avoids -+ * doing so for some cases. So stash the value of truesize -+ * at the time we accounted it, and atm_pop_raw() can use -+ * that value later, in case it changes. -+ */ -+ refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); -+ ATM_SKB(skb)->acct_truesize = skb->truesize; -+ ATM_SKB(skb)->atm_options = vcc->atm_options; -+} - - static inline void atm_force_charge(struct atm_vcc *vcc,int truesize) - { ---- a/net/atm/br2684.c -+++ b/net/atm/br2684.c -@@ -252,8 +252,7 @@ static int br2684_xmit_vcc(struct sk_buf - - ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc; - pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev); -- refcount_add(skb->truesize, &sk_atm(atmvcc)->sk_wmem_alloc); -- ATM_SKB(skb)->atm_options = atmvcc->atm_options; -+ atm_account_tx(atmvcc, skb); - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - ---- a/net/atm/clip.c -+++ b/net/atm/clip.c -@@ -381,8 +381,7 @@ static netdev_tx_t clip_start_xmit(struc - memcpy(here, llc_oui, sizeof(llc_oui)); - ((__be16 *) here)[3] = skb->protocol; - } -- refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); -- ATM_SKB(skb)->atm_options = vcc->atm_options; -+ atm_account_tx(vcc, skb); - entry->vccs->last_use = jiffies; - pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, vcc, vcc->dev); - old = xchg(&entry->vccs->xoff, 1); /* assume XOFF ... */ ---- a/net/atm/common.c -+++ b/net/atm/common.c -@@ -630,10 +630,9 @@ int vcc_sendmsg(struct socket *sock, str - goto out; - } - pr_debug("%d += %d\n", sk_wmem_alloc_get(sk), skb->truesize); -- refcount_add(skb->truesize, &sk->sk_wmem_alloc); -+ atm_account_tx(vcc, skb); - - skb->dev = NULL; /* for paths shared with net_device interfaces */ -- ATM_SKB(skb)->atm_options = vcc->atm_options; - if (!copy_from_iter_full(skb_put(skb, size), size, &m->msg_iter)) { - kfree_skb(skb); - error = -EFAULT; ---- a/net/atm/lec.c -+++ b/net/atm/lec.c -@@ -182,9 +182,8 @@ lec_send(struct atm_vcc *vcc, struct sk_ - struct net_device *dev = skb->dev; - - ATM_SKB(skb)->vcc = vcc; -- ATM_SKB(skb)->atm_options = vcc->atm_options; -+ atm_account_tx(vcc, skb); - -- refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); - if (vcc->send(vcc, skb) < 0) { - dev->stats.tx_dropped++; - return; ---- a/net/atm/mpc.c -+++ b/net/atm/mpc.c -@@ -555,8 +555,7 @@ static int send_via_shortcut(struct sk_b - sizeof(struct llc_snap_hdr)); - } - -- refcount_add(skb->truesize, &sk_atm(entry->shortcut)->sk_wmem_alloc); -- ATM_SKB(skb)->atm_options = entry->shortcut->atm_options; -+ atm_account_tx(entry->shortcut, skb); - entry->shortcut->send(entry->shortcut, skb); - entry->packets_fwded++; - mpc->in_ops->put(entry); ---- a/net/atm/pppoatm.c -+++ b/net/atm/pppoatm.c -@@ -350,8 +350,7 @@ static int pppoatm_send(struct ppp_chann - return 1; - } - -- refcount_add(skb->truesize, &sk_atm(ATM_SKB(skb)->vcc)->sk_wmem_alloc); -- ATM_SKB(skb)->atm_options = ATM_SKB(skb)->vcc->atm_options; -+ atm_account_tx(vcc, skb); - pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", - skb, ATM_SKB(skb)->vcc, ATM_SKB(skb)->vcc->dev); - ret = ATM_SKB(skb)->vcc->send(ATM_SKB(skb)->vcc, skb) ---- a/net/atm/raw.c -+++ b/net/atm/raw.c -@@ -35,8 +35,8 @@ static void atm_pop_raw(struct atm_vcc * - struct sock *sk = sk_atm(vcc); - - pr_debug("(%d) %d -= %d\n", -- vcc->vci, sk_wmem_alloc_get(sk), skb->truesize); -- WARN_ON(refcount_sub_and_test(skb->truesize, &sk->sk_wmem_alloc)); -+ vcc->vci, sk_wmem_alloc_get(sk), ATM_SKB(skb)->acct_truesize); -+ WARN_ON(refcount_sub_and_test(ATM_SKB(skb)->acct_truesize, &sk->sk_wmem_alloc)); - dev_kfree_skb_any(skb); - sk->sk_write_space(sk); - } diff --git a/target/linux/generic/backport-4.14/336-v4.15-netfilter-exit_net-cleanup-check-added.patch b/target/linux/generic/backport-4.14/336-v4.15-netfilter-exit_net-cleanup-check-added.patch index 37975ae038..5c942e3a54 100644 --- a/target/linux/generic/backport-4.14/336-v4.15-netfilter-exit_net-cleanup-check-added.patch +++ b/target/linux/generic/backport-4.14/336-v4.15-netfilter-exit_net-cleanup-check-added.patch @@ -62,7 +62,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> static struct pernet_operations nfnl_log_net_ops = { --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c -@@ -1512,10 +1512,15 @@ static int __net_init nfnl_queue_net_ini +@@ -1515,10 +1515,15 @@ static int __net_init nfnl_queue_net_ini static void __net_exit nfnl_queue_net_exit(struct net *net) { diff --git a/target/linux/generic/backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch b/target/linux/generic/backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch new file mode 100644 index 0000000000..8e63189e80 --- /dev/null +++ b/target/linux/generic/backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch @@ -0,0 +1,65 @@ +From 5012284700775a4e6e3fbe7eac4c543c4874b559 Mon Sep 17 00:00:00 2001 +From: Theodore Ts'o <tytso@mit.edu> +Date: Sat, 28 Jul 2018 08:12:04 -0400 +Subject: [PATCH] ext4: fix check to prevent initializing reserved inodes + +Commit 8844618d8aa7: "ext4: only look at the bg_flags field if it is +valid" will complain if block group zero does not have the +EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct, +since a freshly created file system has this flag cleared. It gets +almost immediately after the file system is mounted read-write --- but +the following somewhat unlikely sequence will end up triggering a +false positive report of a corrupted file system: + + mkfs.ext4 /dev/vdc + mount -o ro /dev/vdc /vdc + mount -o remount,rw /dev/vdc + +Instead, when initializing the inode table for block group zero, test +to make sure that itable_unused count is not too large, since that is +the case that will result in some or all of the reserved inodes +getting cleared. + +This fixes the failures reported by Eric Whiteney when running +generic/230 and generic/231 in the the nojournal test case. + +Fixes: 8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid") +Reported-by: Eric Whitney <enwlinux@gmail.com> +Signed-off-by: Theodore Ts'o <tytso@mit.edu> +--- + fs/ext4/ialloc.c | 5 ++++- + fs/ext4/super.c | 8 +------- + 2 files changed, 5 insertions(+), 8 deletions(-) + +--- a/fs/ext4/ialloc.c ++++ b/fs/ext4/ialloc.c +@@ -1394,7 +1394,10 @@ int ext4_init_inode_table(struct super_b + ext4_itable_unused_count(sb, gdp)), + sbi->s_inodes_per_block); + +- if ((used_blks < 0) || (used_blks > sbi->s_itb_per_group)) { ++ if ((used_blks < 0) || (used_blks > sbi->s_itb_per_group) || ++ ((group == 0) && ((EXT4_INODES_PER_GROUP(sb) - ++ ext4_itable_unused_count(sb, gdp)) < ++ EXT4_FIRST_INO(sb)))) { + ext4_error(sb, "Something is wrong with group %u: " + "used itable blocks: %d; " + "itable unused count: %u", +--- a/fs/ext4/super.c ++++ b/fs/ext4/super.c +@@ -3103,14 +3103,8 @@ static ext4_group_t ext4_has_uninit_itab + if (!gdp) + continue; + +- if (gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED)) +- continue; +- if (group != 0) ++ if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED))) + break; +- ext4_error(sb, "Inode table for bg 0 marked as " +- "needing zeroing"); +- if (sb_rdonly(sb)) +- return ngroups; + } + + return group; diff --git a/target/linux/generic/hack-4.14/207-disable-modorder.patch b/target/linux/generic/hack-4.14/207-disable-modorder.patch index 5fb956c98d..8e920d1c51 100644 --- a/target/linux/generic/hack-4.14/207-disable-modorder.patch +++ b/target/linux/generic/hack-4.14/207-disable-modorder.patch @@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/Makefile +++ b/Makefile -@@ -1227,7 +1227,6 @@ all: modules +@@ -1228,7 +1228,6 @@ all: modules PHONY += modules modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin @@ -23,7 +23,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> @$(kecho) ' Building modules, stage 2.'; $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost -@@ -1256,7 +1255,6 @@ _modinst_: +@@ -1257,7 +1256,6 @@ _modinst_: rm -f $(MODLIB)/build ; \ ln -s $(CURDIR) $(MODLIB)/build ; \ fi diff --git a/target/linux/generic/hack-4.14/211-host_tools_portability.patch b/target/linux/generic/hack-4.14/211-host_tools_portability.patch index 59f1479436..d806df8a5f 100644 --- a/target/linux/generic/hack-4.14/211-host_tools_portability.patch +++ b/target/linux/generic/hack-4.14/211-host_tools_portability.patch @@ -12,7 +12,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/tools/build/Build.include +++ b/tools/build/Build.include -@@ -97,4 +97,4 @@ cxx_flags = -Wp,-MD,$(depfile) -Wp,-MT,$ +@@ -98,4 +98,4 @@ cxx_flags = -Wp,-MD,$(depfile) -Wp,-MT,$ ### ## HOSTCC C flags diff --git a/target/linux/generic/hack-4.14/220-gc_sections.patch b/target/linux/generic/hack-4.14/220-gc_sections.patch index 7fd493d2ff..cdca0bdb5f 100644 --- a/target/linux/generic/hack-4.14/220-gc_sections.patch +++ b/target/linux/generic/hack-4.14/220-gc_sections.patch @@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> # Read KERNELRELEASE from include/config/kernel.release (if it exists) KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) -@@ -781,11 +786,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH +@@ -782,11 +787,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once) endif diff --git a/target/linux/generic/hack-4.14/902-debloat_proc.patch b/target/linux/generic/hack-4.14/902-debloat_proc.patch index 3f47d22355..4f5fb7022c 100644 --- a/target/linux/generic/hack-4.14/902-debloat_proc.patch +++ b/target/linux/generic/hack-4.14/902-debloat_proc.patch @@ -243,7 +243,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> } --- a/mm/vmstat.c +++ b/mm/vmstat.c -@@ -1946,10 +1946,12 @@ void __init init_mm_internals(void) +@@ -1944,10 +1944,12 @@ void __init init_mm_internals(void) start_shepherd_timer(); #endif #ifdef CONFIG_PROC_FS diff --git a/target/linux/generic/pending-4.14/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch b/target/linux/generic/pending-4.14/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch index 5ce2bf87b9..0c4a13f9df 100644 --- a/target/linux/generic/pending-4.14/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch +++ b/target/linux/generic/pending-4.14/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch @@ -13,11 +13,9 @@ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> drivers/w1/masters/w1-gpio.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) -diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c -index a90728ceec5a..7b80762941af 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c -@@ -112,17 +112,16 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) +@@ -112,17 +112,16 @@ static int w1_gpio_probe_dt(struct platf static int w1_gpio_probe(struct platform_device *pdev) { struct w1_bus_master *master; @@ -38,6 +36,3 @@ index a90728ceec5a..7b80762941af 100644 if (!pdata) { dev_err(&pdev->dev, "No configuration data\n"); return -ENXIO; --- -2.14.1 - diff --git a/target/linux/generic/pending-4.14/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch b/target/linux/generic/pending-4.14/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch index cc17053121..b3dc43ea68 100644 --- a/target/linux/generic/pending-4.14/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch +++ b/target/linux/generic/pending-4.14/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch @@ -46,7 +46,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c -@@ -357,6 +357,8 @@ static inline int is_sp_move_ins(union m +@@ -358,6 +358,8 @@ static inline int is_sp_move_ins(union m if (ip->i_format.opcode == addiu_op || ip->i_format.opcode == daddiu_op) { diff --git a/target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch index 03267310a0..9fcffdee06 100644 --- a/target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch +++ b/target/linux/generic/pending-4.14/150-bridge_allow_receiption_on_disabled_port.patch @@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c -@@ -238,7 +238,8 @@ static int br_handle_local_finish(struct +@@ -239,7 +239,8 @@ static int br_handle_local_finish(struct { struct net_bridge_port *p = br_port_get_rcu(skb->dev); @@ -25,7 +25,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> BR_INPUT_SKB_CB(skb)->brdev = p->br->dev; br_pass_frame_up(skb); -@@ -326,6 +327,15 @@ rx_handler_result_t br_handle_frame(stru +@@ -327,6 +328,15 @@ rx_handler_result_t br_handle_frame(stru forward: switch (p->state) { diff --git a/target/linux/generic/pending-4.14/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch b/target/linux/generic/pending-4.14/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch deleted file mode 100644 index 49b33d514f..0000000000 --- a/target/linux/generic/pending-4.14/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch +++ /dev/null @@ -1,126 +0,0 @@ -From 028c9191bdf88f120f65626920a6a679170fcc3e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Antti=20Sepp=C3=A4l=C3=A4?= <a.seppala@gmail.com> -Date: Thu, 5 Jul 2018 11:37:03 +0300 -Subject: [PATCH 1/2] usb: dwc2: Fix DMA alignment to start at allocated - boundary -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more -supported way") introduced a common way to align DMA allocations. -The code in the commit aligns the struct dma_aligned_buffer but the -actual DMA address pointed by data[0] gets aligned to an offset from -the allocated boundary by the kmalloc_ptr and the old_xfer_buffer -pointers. - -This is against the recommendation in Documentation/DMA-API.txt which -states: - - Therefore, it is recommended that driver writers who don't take - special care to determine the cache line size at run time only map - virtual regions that begin and end on page boundaries (which are - guaranteed also to be cache line boundaries). - -The effect of this is that architectures with non-coherent DMA caches -may run into memory corruption or kernel crashes with Unhandled -kernel unaligned accesses exceptions. - -Fix the alignment by positioning the DMA area in front of the allocation -and use memory at the end of the area for storing the orginal -transfer_buffer pointer. This may have the added benefit of increased -performance as the DMA area is now fully aligned on all architectures. - -Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM). - -Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more -supported way") - -Signed-off-by: Antti Seppälä <a.seppala@gmail.com> ---- - drivers/usb/dwc2/hcd.c | 44 +++++++++++++++++++++++--------------------- - 1 file changed, 23 insertions(+), 21 deletions(-) - ---- a/drivers/usb/dwc2/hcd.c -+++ b/drivers/usb/dwc2/hcd.c -@@ -2628,34 +2628,29 @@ static void dwc2_hc_init_xfer(struct dwc - - #define DWC2_USB_DMA_ALIGN 4 - --struct dma_aligned_buffer { -- void *kmalloc_ptr; -- void *old_xfer_buffer; -- u8 data[0]; --}; -- - static void dwc2_free_dma_aligned_buffer(struct urb *urb) - { -- struct dma_aligned_buffer *temp; -+ void *stored_xfer_buffer; - - if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) - return; - -- temp = container_of(urb->transfer_buffer, -- struct dma_aligned_buffer, data); -+ /* Restore urb->transfer_buffer from the end of the allocated area */ -+ memcpy(&stored_xfer_buffer, urb->transfer_buffer + -+ urb->transfer_buffer_length, sizeof(urb->transfer_buffer)); - - if (usb_urb_dir_in(urb)) -- memcpy(temp->old_xfer_buffer, temp->data, -+ memcpy(stored_xfer_buffer, urb->transfer_buffer, - urb->transfer_buffer_length); -- urb->transfer_buffer = temp->old_xfer_buffer; -- kfree(temp->kmalloc_ptr); -+ kfree(urb->transfer_buffer); -+ urb->transfer_buffer = stored_xfer_buffer; - - urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; - } - - static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) - { -- struct dma_aligned_buffer *temp, *kmalloc_ptr; -+ void *kmalloc_ptr; - size_t kmalloc_size; - - if (urb->num_sgs || urb->sg || -@@ -2663,22 +2658,29 @@ static int dwc2_alloc_dma_aligned_buffer - !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1))) - return 0; - -- /* Allocate a buffer with enough padding for alignment */ -+ /* -+ * Allocate a buffer with enough padding for original transfer_buffer -+ * pointer. This allocation is guaranteed to be aligned properly for -+ * DMA -+ */ - kmalloc_size = urb->transfer_buffer_length + -- sizeof(struct dma_aligned_buffer) + DWC2_USB_DMA_ALIGN - 1; -+ sizeof(urb->transfer_buffer); - - kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); - if (!kmalloc_ptr) - return -ENOMEM; - -- /* Position our struct dma_aligned_buffer such that data is aligned */ -- temp = PTR_ALIGN(kmalloc_ptr + 1, DWC2_USB_DMA_ALIGN) - 1; -- temp->kmalloc_ptr = kmalloc_ptr; -- temp->old_xfer_buffer = urb->transfer_buffer; -+ /* -+ * Position value of original urb->transfer_buffer pointer to the end -+ * of allocation for later referencing -+ */ -+ memcpy(kmalloc_ptr + urb->transfer_buffer_length, -+ &urb->transfer_buffer, sizeof(urb->transfer_buffer)); -+ - if (usb_urb_dir_out(urb)) -- memcpy(temp->data, urb->transfer_buffer, -+ memcpy(kmalloc_ptr, urb->transfer_buffer, - urb->transfer_buffer_length); -- urb->transfer_buffer = temp->data; -+ urb->transfer_buffer = kmalloc_ptr; - - urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; - diff --git a/target/linux/generic/pending-4.14/201-extra_optimization.patch b/target/linux/generic/pending-4.14/201-extra_optimization.patch index 445c0bd87d..b40f01d41f 100644 --- a/target/linux/generic/pending-4.14/201-extra_optimization.patch +++ b/target/linux/generic/pending-4.14/201-extra_optimization.patch @@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/Makefile +++ b/Makefile -@@ -645,12 +645,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni +@@ -646,12 +646,12 @@ KBUILD_CFLAGS += $(call cc-disable-warni ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE KBUILD_CFLAGS += $(call cc-option,-Oz,-Os) diff --git a/target/linux/generic/pending-4.14/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-4.14/610-netfilter_match_bypass_default_checks.patch index 3611879609..2541230ff5 100644 --- a/target/linux/generic/pending-4.14/610-netfilter_match_bypass_default_checks.patch +++ b/target/linux/generic/pending-4.14/610-netfilter_match_bypass_default_checks.patch @@ -68,7 +68,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> if (!xt_percpu_counter_alloc(alloc_state, &e->counters)) return -ENOMEM; -@@ -817,6 +845,7 @@ copy_entries_to_user(unsigned int total_ +@@ -818,6 +846,7 @@ copy_entries_to_user(unsigned int total_ const struct xt_table_info *private = table->private; int ret = 0; const void *loc_cpu_entry; @@ -76,7 +76,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> counters = alloc_counters(table); if (IS_ERR(counters)) -@@ -844,6 +873,14 @@ copy_entries_to_user(unsigned int total_ +@@ -845,6 +874,14 @@ copy_entries_to_user(unsigned int total_ goto free_counters; } @@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> for (i = sizeof(struct ipt_entry); i < e->target_offset; i += m->u.match_size) { -@@ -1226,12 +1263,15 @@ compat_copy_entry_to_user(struct ipt_ent +@@ -1227,12 +1264,15 @@ compat_copy_entry_to_user(struct ipt_ent compat_uint_t origsize; const struct xt_entry_match *ematch; int ret = 0; diff --git a/target/linux/generic/pending-4.14/630-packet_socket_type.patch b/target/linux/generic/pending-4.14/630-packet_socket_type.patch index e1736214f5..82e2c51afd 100644 --- a/target/linux/generic/pending-4.14/630-packet_socket_type.patch +++ b/target/linux/generic/pending-4.14/630-packet_socket_type.patch @@ -87,7 +87,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> if (!net_eq(dev_net(dev), sock_net(sk))) goto drop; -@@ -3262,6 +3264,7 @@ static int packet_create(struct net *net +@@ -3260,6 +3262,7 @@ static int packet_create(struct net *net mutex_init(&po->pg_vec_lock); po->rollover = NULL; po->prot_hook.func = packet_rcv; @@ -95,7 +95,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> if (sock->type == SOCK_PACKET) po->prot_hook.func = packet_rcv_spkt; -@@ -3875,6 +3878,16 @@ packet_setsockopt(struct socket *sock, i +@@ -3873,6 +3876,16 @@ packet_setsockopt(struct socket *sock, i po->xmit = val ? packet_direct_xmit : dev_queue_xmit; return 0; } @@ -112,7 +112,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> default: return -ENOPROTOOPT; } -@@ -3927,6 +3940,13 @@ static int packet_getsockopt(struct sock +@@ -3925,6 +3938,13 @@ static int packet_getsockopt(struct sock case PACKET_VNET_HDR: val = po->has_vnet_hdr; break; diff --git a/target/linux/generic/pending-4.14/834-ledtrig-libata.patch b/target/linux/generic/pending-4.14/834-ledtrig-libata.patch index 280536e1e6..2eec024b72 100644 --- a/target/linux/generic/pending-4.14/834-ledtrig-libata.patch +++ b/target/linux/generic/pending-4.14/834-ledtrig-libata.patch @@ -65,7 +65,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> /** * ata_build_rw_tf - Build ATA taskfile for given read/write request * @tf: Target ATA taskfile -@@ -5117,6 +5130,9 @@ struct ata_queued_cmd *ata_qc_new_init(s +@@ -5120,6 +5133,9 @@ struct ata_queued_cmd *ata_qc_new_init(s if (tag < 0) return NULL; } @@ -75,7 +75,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> qc = __ata_qc_from_tag(ap, tag); qc->tag = tag; -@@ -6018,6 +6034,9 @@ struct ata_port *ata_port_alloc(struct a +@@ -6021,6 +6037,9 @@ struct ata_port *ata_port_alloc(struct a ap->stats.unhandled_irq = 1; ap->stats.idle_irq = 1; #endif @@ -85,7 +85,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> ata_sff_port_init(ap); return ap; -@@ -6039,6 +6058,12 @@ static void ata_host_release(struct devi +@@ -6042,6 +6061,12 @@ static void ata_host_release(struct devi kfree(ap->pmp_link); kfree(ap->slave_link); @@ -98,7 +98,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> kfree(ap); host->ports[i] = NULL; } -@@ -6485,7 +6510,23 @@ int ata_host_register(struct ata_host *h +@@ -6488,7 +6513,23 @@ int ata_host_register(struct ata_host *h host->ports[i]->print_id = atomic_inc_return(&ata_print_id); host->ports[i]->local_port_no = i + 1; } @@ -134,7 +134,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> /* * Define if arch has non-standard setup. This is a _PCI_ standard -@@ -889,6 +892,12 @@ struct ata_port { +@@ -890,6 +893,12 @@ struct ata_port { #ifdef CONFIG_ATA_ACPI struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif diff --git a/target/linux/generic/pending-4.14/900-gen_stats-fix-netlink-stats-padding.patch b/target/linux/generic/pending-4.14/900-gen_stats-fix-netlink-stats-padding.patch deleted file mode 100644 index f5ceecca93..0000000000 --- a/target/linux/generic/pending-4.14/900-gen_stats-fix-netlink-stats-padding.patch +++ /dev/null @@ -1,49 +0,0 @@ -The gen_stats facility will add a header for the toplevel nlattr of type -TCA_STATS2 that contains all stats added by qdisc callbacks. A reference -to this header is stored in the gnet_dump struct, and when all the -per-qdisc callbacks have finished adding their stats, the length of the -containing header will be adjusted to the right value. - -However, on architectures that need padding (i.e., that don't set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added -before the stats, which means that the stored pointer will point to the -padding, and so when the header is fixed up, the result is just a very -big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS -struct, this problem has been mostly invisible, but we exposed it with -the netlink attribute-based statistics in CAKE. - -Fix the issue by fixing up the stored pointer if it points to a padding -nlattr. - -Tested-by: Pete Heist <pete@heistp.net> -Tested-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> -Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> ---- - net/core/gen_stats.c | 16 ++++++++++++++-- - 1 file changed, 14 insertions(+), 2 deletions(-) - ---- a/net/core/gen_stats.c -+++ b/net/core/gen_stats.c -@@ -77,8 +77,20 @@ gnet_stats_start_copy_compat(struct sk_b - d->lock = lock; - spin_lock_bh(lock); - } -- if (d->tail) -- return gnet_stats_copy(d, type, NULL, 0, padattr); -+ if (d->tail) { -+ int ret = gnet_stats_copy(d, type, NULL, 0, padattr); -+ -+ /* The initial attribute added in gnet_stats_copy() may be -+ * preceded by a padding attribute, in which case d->tail will -+ * end up pointing at the padding instead of the real attribute. -+ * Fix this so gnet_stats_finish_copy() adjusts the length of -+ * the right attribute. -+ */ -+ if (ret == 0 && d->tail->nla_type == padattr) -+ d->tail = (struct nlattr *)((char *)d->tail + -+ NLA_ALIGN(d->tail->nla_len)); -+ return ret; -+ } - - return 0; - } diff --git a/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch b/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch index 1e1a83220e..ea8dedb5a4 100644 --- a/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch +++ b/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch @@ -12,11 +12,9 @@ Signed-off-by: John Crispin <john@phrozen.org> drivers/soc/qcom/spm.c | 3 +++ 1 file changed, 3 insertions(+) -diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c -index f9d7a85b2822..53807e839664 100644 --- a/drivers/soc/qcom/spm.c +++ b/drivers/soc/qcom/spm.c -@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu) +@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru cpumask_t mask; bool use_scm_power_down = false; @@ -26,6 +24,3 @@ index f9d7a85b2822..53807e839664 100644 for (i = 0; ; i++) { state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); if (!state_node) --- -2.11.0 - diff --git a/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch b/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch index e92ead5ee2..d72e3d3c36 100644 --- a/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch +++ b/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch @@ -20,11 +20,9 @@ Signed-off-by: John Crispin <john@phrozen.org> arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi -index 98b9850ed2a0..3289b3a6c10e 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -316,7 +316,7 @@ +@@ -262,7 +262,7 @@ saw0: regulator@b089000 { compatible = "qcom,saw2"; @@ -33,6 +31,3 @@ index 98b9850ed2a0..3289b3a6c10e 100644 regulator; }; --- -2.11.0 - diff --git a/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch index cdecd14293..b3a83957ad 100644 --- a/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch +++ b/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch @@ -12,10 +12,8 @@ Signed-off-by: John Crispin <john@phrozen.org> arch/arm/mach-qcom/Kconfig | 5 +++++ 2 files changed, 6 insertions(+) -Index: linux-4.14.54/arch/arm/Makefile -=================================================================== ---- linux-4.14.54.orig/arch/arm/Makefile -+++ linux-4.14.54/arch/arm/Makefile +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile @@ -150,6 +150,7 @@ endif textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 @@ -24,10 +22,8 @@ Index: linux-4.14.54/arch/arm/Makefile # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. -Index: linux-4.14.54/arch/arm/mach-qcom/Kconfig -=================================================================== ---- linux-4.14.54.orig/arch/arm/mach-qcom/Kconfig -+++ linux-4.14.54/arch/arm/mach-qcom/Kconfig +--- a/arch/arm/mach-qcom/Kconfig ++++ b/arch/arm/mach-qcom/Kconfig @@ -27,4 +27,9 @@ config ARCH_MDM9615 bool "Enable support for MDM9615" select CLKSRC_QCOM diff --git a/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch b/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch index 6710caf657..e7407bcbab 100644 --- a/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch +++ b/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch @@ -12,9 +12,6 @@ Signed-off-by: John Crispin <john@phrozen.org> 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt -diff --git a/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt -new file mode 100644 -index 000000000000..362877fcafed --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt @@ -0,0 +1,21 @@ @@ -39,6 +36,3 @@ index 000000000000..362877fcafed + <&gcc USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; +}; --- -2.11.0 - diff --git a/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch b/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch index 4cab66b677..f93c80f52e 100644 --- a/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch +++ b/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch @@ -15,10 +15,8 @@ Signed-off-by: John Crispin <john@phrozen.org> 3 files changed, 196 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c -Index: linux-4.14.54/drivers/phy/qualcomm/Kconfig -=================================================================== ---- linux-4.14.54.orig/drivers/phy/qualcomm/Kconfig -+++ linux-4.14.54/drivers/phy/qualcomm/Kconfig +--- a/drivers/phy/qualcomm/Kconfig ++++ b/drivers/phy/qualcomm/Kconfig @@ -8,6 +8,13 @@ config PHY_QCOM_APQ8064_SATA depends on OF select GENERIC_PHY @@ -33,10 +31,8 @@ Index: linux-4.14.54/drivers/phy/qualcomm/Kconfig config PHY_QCOM_IPQ806X_SATA tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" depends on ARCH_QCOM -Index: linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c -=================================================================== --- /dev/null -+++ linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c ++++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c @@ -0,0 +1,188 @@ +/* + * Copyright (C) 2018 John Crispin <john@phrozen.org> @@ -226,10 +222,8 @@ Index: linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c +MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); +MODULE_AUTHOR("John Crispin <john@phrozen.org>"); +MODULE_LICENSE("GPL v2"); -Index: linux-4.14.54/drivers/phy/qualcomm/Makefile -=================================================================== ---- linux-4.14.54.orig/drivers/phy/qualcomm/Makefile -+++ linux-4.14.54/drivers/phy/qualcomm/Makefile +--- a/drivers/phy/qualcomm/Makefile ++++ b/drivers/phy/qualcomm/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o diff --git a/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch index 7cc7d9d5f4..94156dce21 100644 --- a/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ b/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch @@ -11,11 +11,9 @@ Signed-off-by: John Crispin <john@phrozen.org> arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++ 2 files changed, 94 insertions(+) -diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -index 418f9a022336..2ee5f05d5a43 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -109,5 +109,25 @@ +@@ -101,5 +101,25 @@ wifi@a800000 { status = "ok"; }; @@ -41,11 +39,9 @@ index 418f9a022336..2ee5f05d5a43 100644 + }; }; }; -diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi -index e5e52adbd5a3..e6b12129f0e4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -553,5 +553,79 @@ +@@ -410,5 +410,79 @@ "legacy"; status = "disabled"; }; @@ -125,6 +121,3 @@ index e5e52adbd5a3..e6b12129f0e4 100644 + }; }; }; --- -2.11.0 - diff --git a/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch b/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch index 6f522ffcad..b761073c12 100644 --- a/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch +++ b/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch @@ -15,11 +15,9 @@ Signed-off-by: Andy Gross <andy.gross@linaro.org> arch/arm/boot/dts/qcom-ipq4019.dtsi | 156 ++++++++++++++++++++++++-- 2 files changed, 146 insertions(+), 12 deletions(-) -diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -index ef8d8c88ed7b..418f9a022336 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -69,7 +69,7 @@ +@@ -61,7 +61,7 @@ status = "ok"; }; @@ -28,12 +26,10 @@ index ef8d8c88ed7b..418f9a022336 100644 pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "ok"; -diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi -index 2efc8a2d41a7..737097e9fb4f 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -40,8 +40,10 @@ - }; +@@ -24,8 +24,10 @@ + interrupt-parent = <&intc>; aliases { - spi0 = &spi_0; @@ -45,7 +41,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 }; cpus { -@@ -120,6 +122,12 @@ +@@ -132,6 +134,12 @@ }; }; @@ -58,7 +54,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, -@@ -165,13 +173,13 @@ +@@ -177,13 +185,13 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -74,7 +70,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 clocks = <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; -@@ -179,7 +187,7 @@ +@@ -191,7 +199,7 @@ status = "disabled"; }; @@ -83,7 +79,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 compatible = "qcom,spi-qup-v2.2.1"; reg = <0x78b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; -@@ -188,10 +196,26 @@ +@@ -200,10 +208,26 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; @@ -111,7 +107,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; -@@ -200,14 +224,29 @@ +@@ -212,14 +236,29 @@ clock-names = "iface", "core"; #address-cells = <1>; #size-cells = <0>; @@ -142,8 +138,8 @@ index 2efc8a2d41a7..737097e9fb4f 100644 clocks = <&gcc GCC_CRYPTO_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; -@@ -275,7 +314,7 @@ - blsp1_uart1: serial@78af000 { +@@ -293,7 +332,7 @@ + serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78af000 0x200>; - interrupts = <0 107 0>; @@ -151,7 +147,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 status = "disabled"; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; -@@ -287,7 +326,7 @@ +@@ -305,7 +344,7 @@ serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78b0000 0x200>; @@ -160,7 +156,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 status = "disabled"; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; -@@ -309,6 +348,101 @@ +@@ -327,6 +366,101 @@ reg = <0x4ab000 0x4>; }; @@ -262,7 +258,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 wifi0: wifi@a000000 { compatible = "qcom,ipq4019-wifi"; reg = <0xa000000 0x200000>; -@@ -342,7 +476,7 @@ +@@ -360,7 +494,7 @@ <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, @@ -271,7 +267,7 @@ index 2efc8a2d41a7..737097e9fb4f 100644 interrupt-names = "msi0", "msi1", "msi2", "msi3", "msi4", "msi5", "msi6", "msi7", "msi8", "msi9", "msi10", "msi11", -@@ -384,7 +518,7 @@ +@@ -402,7 +536,7 @@ <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>, @@ -280,6 +276,3 @@ index 2efc8a2d41a7..737097e9fb4f 100644 interrupt-names = "msi0", "msi1", "msi2", "msi3", "msi4", "msi5", "msi6", "msi7", "msi8", "msi9", "msi10", "msi11", --- -2.11.0 - diff --git a/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch b/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch index eaccb00bb0..253e91480f 100644 --- a/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch +++ b/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch @@ -12,12 +12,12 @@ Signed-off-by: Mathias Kresin <dev@kresin.me> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -359,7 +359,7 @@ +@@ -381,7 +381,7 @@ #size-cells = <2>; ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 - 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; + 0x82000000 0 0x40300000 0x40300000 0 0x400000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; interrupt-names = "msi"; diff --git a/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch b/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch index 57ed940fd1..f76dd18187 100644 --- a/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch +++ b/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch @@ -61,7 +61,7 @@ Origin: other, https://patchwork.kernel.org/patch/10339127/ --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -166,6 +166,7 @@ +@@ -182,6 +182,7 @@ compatible = "qcom,ipq4019-pinctrl"; reg = <0x01000000 0x300000>; gpio-controller; diff --git a/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch index dcf17874b3..d71fbbbda2 100644 --- a/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch +++ b/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch @@ -42,11 +42,9 @@ Signed-off-by: John Crispin <john@phrozen.org> drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) -diff --git a/drivers/clk/qcom/gcc-ipq4019.c b/drivers/clk/qcom/gcc-ipq4019.c -index 46cb256b4aa2..4ec43f7d2e52 100644 --- a/drivers/clk/qcom/gcc-ipq4019.c +++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fepll_vco = { +@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fe .reg = 0x2f020, }; @@ -76,7 +74,7 @@ index 46cb256b4aa2..4ec43f7d2e52 100644 /* * Round rate function for APSS CPU PLL Clock divider. * It looks up the frequency table and returns the next higher frequency -@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struct clk_hw *hw, unsigned long rate, +@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struc struct clk_hw *p_hw; const struct freq_tbl *f; @@ -85,7 +83,7 @@ index 46cb256b4aa2..4ec43f7d2e52 100644 if (!f) return -EINVAL; -@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct clk_hw *hw, unsigned long rate, +@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct c u32 mask; int ret; @@ -102,7 +100,7 @@ index 46cb256b4aa2..4ec43f7d2e52 100644 struct clk_fepll *pll = to_clk_fepll(hw); u32 cdiv, pre_div; u64 rate; -@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *hw, +@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; do_div(rate, pre_div); @@ -115,6 +113,3 @@ index 46cb256b4aa2..4ec43f7d2e52 100644 }; static const struct clk_ops clk_regmap_cpu_div_ops = { --- -2.11.0 - diff --git a/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch b/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch index 56ae66b089..6a595d5ef6 100644 --- a/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch +++ b/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch @@ -84,5 +84,5 @@ this change qualifies for a stable@vger.kernel.org submission. + }; + aliases { - spi0 = &spi_0; - spi1 = &spi_1; + spi0 = &blsp1_spi1; + spi1 = &blsp1_spi2; diff --git a/target/linux/ipq40xx/patches-4.14/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch b/target/linux/ipq40xx/patches-4.14/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch index 4ee79515c9..6a83d79d8c 100644 --- a/target/linux/ipq40xx/patches-4.14/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch +++ b/target/linux/ipq40xx/patches-4.14/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch @@ -17,7 +17,7 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c -@@ -1184,6 +1184,9 @@ static void __init ubi_auto_attach(void) +@@ -1187,6 +1187,9 @@ static void __init ubi_auto_attach(void) mtd = open_mtd_device("ubi"); if (IS_ERR(mtd)) mtd = open_mtd_device("data"); @@ -25,5 +25,5 @@ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> + if (IS_ERR(mtd)) + mtd = open_mtd_device("UBI_DEV"); - if (!IS_ERR(mtd)) { - size_t len; + if (IS_ERR(mtd)) + return; diff --git a/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch index 25f596eaff..5c2e19941b 100644 --- a/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch +++ b/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch @@ -15,7 +15,7 @@ so the info might change. --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -540,6 +540,34 @@ +@@ -562,6 +562,34 @@ status = "disabled"; }; @@ -48,5 +48,5 @@ so the info might change. + }; + usb3_ss_phy: ssphy@9a000 { - compatible = "qca,uni-ssphy"; - reg = <0x9a000 0x800>; + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch index eb3d9be013..2b7921a616 100644 --- a/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch +++ b/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch @@ -14,7 +14,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -568,6 +568,29 @@ +@@ -590,6 +590,29 @@ }; }; @@ -42,5 +42,5 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com> + }; + usb3_ss_phy: ssphy@9a000 { - compatible = "qca,uni-ssphy"; - reg = <0x9a000 0x800>; + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch index 6e4137073a..db545e6906 100644 --- a/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch +++ b/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch @@ -14,10 +14,8 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com> arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) -Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi -=================================================================== ---- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -44,6 +44,8 @@ spi1 = &blsp1_spi2; i2c0 = &blsp1_i2c3; @@ -27,7 +25,7 @@ Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi }; cpus { -@@ -606,6 +608,64 @@ +@@ -613,6 +615,64 @@ status = "disabled"; }; diff --git a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch index b24d85ba13..25652bb2c9 100644 --- a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch +++ b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch @@ -1,7 +1,5 @@ -Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -=================================================================== ---- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -15,12 +15,39 @@ */ @@ -80,10 +78,8 @@ Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi usb3_ss_phy: ssphy@9a000 { status = "ok"; }; -Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -=================================================================== ---- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -+++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts @@ -18,5 +18,73 @@ / { diff --git a/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch index 5b479aba4e..9036ead951 100644 --- a/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch +++ b/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -@@ -185,18 +185,18 @@ +@@ -186,18 +186,18 @@ }; partition@a0000 { @@ -22,7 +22,7 @@ reg = <0x400000 0x1C00000>; }; }; -@@ -210,7 +210,7 @@ +@@ -211,7 +211,7 @@ }; ð0 { @@ -30,4 +30,4 @@ + status = "disabled"; ethernet0-port@0 { speed = <1000>; - duplex = <1>;
\ No newline at end of file + duplex = <1>; diff --git a/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch b/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch index 3c4fc5a7ce..134d95d992 100644 --- a/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch +++ b/target/linux/mediatek/patches-4.14/0052-net-phy-add-FC.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org> --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c -@@ -1929,7 +1929,7 @@ static struct phy_driver genphy_driver = +@@ -1926,7 +1926,7 @@ static struct phy_driver genphy_driver = .config_init = genphy_config_init, .features = PHY_GBIT_FEATURES | SUPPORTED_MII | SUPPORTED_AUI | SUPPORTED_FIBRE | diff --git a/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch b/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch index c48db55d7f..ee260d2aab 100644 --- a/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch +++ b/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch @@ -127,7 +127,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> /* Set the HCD state before we enable the irqs */ --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1726,6 +1726,8 @@ struct xhci_hcd { +@@ -1730,6 +1730,8 @@ struct xhci_hcd { u8 max_interrupters; u8 max_ports; u8 isoc_threshold; diff --git a/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch b/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch index 8688a453df..eb864e4657 100644 --- a/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch +++ b/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch @@ -11,8 +11,6 @@ Subject: [PATCH] arm: dts: Add Unielec U7623 DTS create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index 3fec84fa0..e685ce9a4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1062,6 +1062,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ @@ -23,9 +21,6 @@ index 3fec84fa0..e685ce9a4 100644 mt7623n-rfb-nand.dtb \ mt7623n-bananapi-bpi-r2.dtb \ mt8127-moose.dtb \ -diff --git a/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts -new file mode 100644 -index 000000000..3b14eccd3 --- /dev/null +++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts @@ -0,0 +1,17 @@ @@ -46,9 +41,6 @@ index 000000000..3b14eccd3 + reg = <0 0x80000000 0 0x20000000>; + }; +}; -diff --git a/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi -new file mode 100644 -index 000000000..436b02f2d --- /dev/null +++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi @@ -0,0 +1,375 @@ @@ -427,6 +419,3 @@ index 000000000..436b02f2d + status = "okay"; +}; + --- -2.14.1 - diff --git a/target/linux/oxnas/patches-4.14/999-libata-hacks.patch b/target/linux/oxnas/patches-4.14/999-libata-hacks.patch index da3660fada..e490dbf7c1 100644 --- a/target/linux/oxnas/patches-4.14/999-libata-hacks.patch +++ b/target/linux/oxnas/patches-4.14/999-libata-hacks.patch @@ -15,7 +15,7 @@ /* initialize internal qc */ /* XXX: Tag 0 is used for drivers with legacy EH as some -@@ -5124,6 +5132,9 @@ struct ata_queued_cmd *ata_qc_new_init(s +@@ -5127,6 +5135,9 @@ struct ata_queued_cmd *ata_qc_new_init(s if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; @@ -25,7 +25,7 @@ /* libsas case */ if (ap->flags & ATA_FLAG_SAS_HOST) { tag = ata_sas_allocate_tag(ap); -@@ -5169,6 +5180,8 @@ void ata_qc_free(struct ata_queued_cmd * +@@ -5172,6 +5183,8 @@ void ata_qc_free(struct ata_queued_cmd * qc->tag = ATA_TAG_POISON; if (ap->flags & ATA_FLAG_SAS_HOST) ata_sas_free_tag(tag, ap); @@ -36,7 +36,7 @@ --- a/include/linux/libata.h +++ b/include/linux/libata.h -@@ -918,6 +918,8 @@ struct ata_port_operations { +@@ -919,6 +919,8 @@ struct ata_port_operations { void (*qc_prep)(struct ata_queued_cmd *qc); unsigned int (*qc_issue)(struct ata_queued_cmd *qc); bool (*qc_fill_rtf)(struct ata_queued_cmd *qc); @@ -45,7 +45,7 @@ /* * Configuration and exception handling -@@ -1008,6 +1010,9 @@ struct ata_port_operations { +@@ -1009,6 +1011,9 @@ struct ata_port_operations { void (*phy_reset)(struct ata_port *ap); void (*eng_timeout)(struct ata_port *ap); diff --git a/target/linux/ramips/patches-4.14/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-4.14/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch deleted file mode 100644 index 9226202b7f..0000000000 --- a/target/linux/ramips/patches-4.14/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 8e72a3a1be8f6328bd7ef491332ba541547b6086 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Mon, 15 Jul 2013 00:38:51 +0200 -Subject: [PATCH 36/53] mtd: fix cfi cmdset 0002 erase status check - ---- - drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -2295,7 +2295,7 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -+ if (chip_good(map, adr, map_word_ff(map))) - break; - - if (time_after(jiffies, timeo)) { -@@ -2385,7 +2385,7 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); - break; - } diff --git a/target/linux/ramips/patches-4.14/0037-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-4.14/0037-mtd-cfi-cmdset-0002-force-word-write.patch index 7ee8284535..1cadfcdb00 100644 --- a/target/linux/ramips/patches-4.14/0037-mtd-cfi-cmdset-0002-force-word-write.patch +++ b/target/linux/ramips/patches-4.14/0037-mtd-cfi-cmdset-0002-force-word-write.patch @@ -16,7 +16,7 @@ Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write -#define FORCE_WORD_WRITE 0 +#define FORCE_WORD_WRITE 1 - #define MAX_WORD_RETRIES 3 + #define MAX_RETRIES 3 @@ -51,7 +51,9 @@ |