bcm63xx: switch to upstream LED patch

The patch adding support for the second LED HW blinking interval has been
merged (linux 5.9).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 95 insertions, 44 deletions

diff --git a/target/linux/bcm63xx/patches-5.4/120-leds-bcm6328-support-second-hw-blinking-interval.patch b/target/linux/bcm63xx/patches-5.4/030-v5.9-leds-bcm6328-support-second-hw-blinking-interval.patch
index 6ed26f2741..9bf6b0fc87 100644
--- a/target/linux/bcm63xx/patches-5.4/120-leds-bcm6328-support-second-hw-blinking-interval.patch
+++ b/target/linux/bcm63xx/patches-5.4/030-v5.9-leds-bcm6328-support-second-hw-blinking-interval.patch
@@ -1,37 +1,66 @@
+From e190f57df3c7e7713687905c14e72fbcbd81c5e4 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Thu, 4 Jun 2020 15:59:05 +0200
+Subject: [PATCH] leds-bcm6328: support second hw blinking interval
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Right now the driver uses only 3 LED modes:
+0: On
+1: HW Blinking (Interval 1)
+3: Off
+
+However, the controller supports a second HW blinking interval, which results
+in 4 possible LED modes:
+0: On
+1: HW Blinking (Interval 1)
+2: HW Blinking (Interval 2)
+3: Off
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ drivers/leds/leds-bcm6328.c | 97 ++++++++++++++++++++++++++++---------
+ 1 file changed, 75 insertions(+), 22 deletions(-)
+
 --- a/drivers/leds/leds-bcm6328.c
 +++ b/drivers/leds/leds-bcm6328.c
-@@ -24,12 +24,16 @@
+@@ -24,12 +24,17 @@
  
  #define BCM6328_LED_MAX_COUNT		24
  #define BCM6328_LED_DEF_DELAY		500
-+#define BCM6328_LED_INTERVAL_NUM	2
- #define BCM6328_LED_INTERVAL_MS		20
+-#define BCM6328_LED_INTERVAL_MS		20
  
- #define BCM6328_LED_INTV_MASK		0x3f
+-#define BCM6328_LED_INTV_MASK		0x3f
 -#define BCM6328_LED_FAST_INTV_SHIFT	6
 -#define BCM6328_LED_FAST_INTV_MASK	(BCM6328_LED_INTV_MASK << \
 -					 BCM6328_LED_FAST_INTV_SHIFT)
-+#define BCM6328_LED_INTV1_SHIFT		0
-+#define BCM6328_LED_INTV1_MASK		(BCM6328_LED_INTV_MASK << \
-+					 BCM6328_LED_INTV1_SHIFT)
-+#define BCM6328_LED_INTV2_SHIFT		6
-+#define BCM6328_LED_INTV2_MASK		(BCM6328_LED_INTV_MASK << \
-+					 BCM6328_LED_INTV2_SHIFT)
++#define BCM6328_LED_BLINK_DELAYS	2
++#define BCM6328_LED_BLINK_MS		20
++
++#define BCM6328_LED_BLINK_MASK		0x3f
++#define BCM6328_LED_BLINK1_SHIFT	0
++#define BCM6328_LED_BLINK1_MASK		(BCM6328_LED_BLINK_MASK << \
++					 BCM6328_LED_BLINK1_SHIFT)
++#define BCM6328_LED_BLINK2_SHIFT	6
++#define BCM6328_LED_BLINK2_MASK		(BCM6328_LED_BLINK_MASK << \
++					 BCM6328_LED_BLINK2_SHIFT)
  #define BCM6328_SERIAL_LED_EN		BIT(12)
  #define BCM6328_SERIAL_LED_MUX		BIT(13)
  #define BCM6328_SERIAL_LED_CLK_NPOL	BIT(14)
-@@ -45,8 +49,8 @@
+@@ -45,8 +50,8 @@
  
  #define BCM6328_LED_MODE_MASK		3
  #define BCM6328_LED_MODE_ON		0
 -#define BCM6328_LED_MODE_FAST		1
 -#define BCM6328_LED_MODE_BLINK		2
-+#define BCM6328_LED_MODE_INTV1		1
-+#define BCM6328_LED_MODE_INTV2		2
++#define BCM6328_LED_MODE_BLINK1		1
++#define BCM6328_LED_MODE_BLINK2		2
  #define BCM6328_LED_MODE_OFF		3
  #define BCM6328_LED_SHIFT(X)		((X) << 1)
  
-@@ -127,12 +131,18 @@ static void bcm6328_led_set(struct led_c
+@@ -127,12 +132,18 @@ static void bcm6328_led_set(struct led_c
  	unsigned long flags;
  
  	spin_lock_irqsave(led->lock, flags);
@@ -51,7 +80,28 @@
  	spin_unlock_irqrestore(led->lock, flags);
  }
  
-@@ -176,20 +186,59 @@ static int bcm6328_blink_set(struct led_
+@@ -140,8 +151,8 @@ static unsigned long bcm6328_blink_delay
+ {
+ 	unsigned long bcm6328_delay;
+ 
+-	bcm6328_delay = delay + BCM6328_LED_INTERVAL_MS / 2;
+-	bcm6328_delay = bcm6328_delay / BCM6328_LED_INTERVAL_MS;
++	bcm6328_delay = delay + BCM6328_LED_BLINK_MS / 2;
++	bcm6328_delay = bcm6328_delay / BCM6328_LED_BLINK_MS;
+ 	if (bcm6328_delay == 0)
+ 		bcm6328_delay = 1;
+ 
+@@ -168,28 +179,68 @@ static int bcm6328_blink_set(struct led_
+ 		return -EINVAL;
+ 	}
+ 
+-	if (delay > BCM6328_LED_INTV_MASK) {
++	if (delay > BCM6328_LED_BLINK_MASK) {
+ 		dev_dbg(led_cdev->dev,
+ 			"fallback to soft blinking (delay > %ums)\n",
+-			BCM6328_LED_INTV_MASK * BCM6328_LED_INTERVAL_MS);
++			BCM6328_LED_BLINK_MASK * BCM6328_LED_BLINK_MS);
+ 		return -EINVAL;
  	}
  
  	spin_lock_irqsave(led->lock, flags);
@@ -62,75 +112,76 @@
 +	 * Check if any of the two configurable HW blinking intervals is
 +	 * available:
 +	 *   1. No LEDs assigned to the HW blinking interval.
-+	 *   2. LEDs with the same delay assigned.
++	 *   2. Only this LED is assigned to the HW blinking interval.
++	 *   3. LEDs with the same delay assigned.
 +	 */
 +	if (led->blink_leds[0] == 0 ||
 +	    led->blink_leds[0] == BIT(led->pin) ||
 +	    led->blink_delay[0] == delay) {
-+		unsigned long val;
-+
+ 		unsigned long val;
+ 
+-		*(led->blink_leds) |= BIT(led->pin);
+-		*(led->blink_delay) = delay;
 +		/* Add LED to the first HW blinking interval cache */
 +		led->blink_leds[0] |= BIT(led->pin);
 +
 +		/* Remove LED from the second HW blinking interval cache */
 +		led->blink_leds[1] &= ~BIT(led->pin);
-+
-+		/* Cache the LED in the first HW blinking interval delay */
+ 
++		/* Cache first HW blinking interval delay */
 +		led->blink_delay[0] = delay;
 +
 +		/* Update the delay for the first HW blinking interval */
-+		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
-+		val &= ~BCM6328_LED_INTV1_MASK;
-+		val |= (delay << BCM6328_LED_INTV1_SHIFT);
-+		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
-+
+ 		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
+-		val &= ~BCM6328_LED_FAST_INTV_MASK;
+-		val |= (delay << BCM6328_LED_FAST_INTV_SHIFT);
++		val &= ~BCM6328_LED_BLINK1_MASK;
++		val |= (delay << BCM6328_LED_BLINK1_SHIFT);
+ 		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
+ 
+-		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK);
 +		/* Set the LED to first HW blinking interval */
-+		bcm6328_led_mode(led, BCM6328_LED_MODE_INTV1);
++		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK1);
 +
 +		rc = 0;
 +	} else if (led->blink_leds[1] == 0 ||
 +		   led->blink_leds[1] == BIT(led->pin) ||
 +		   led->blink_delay[1] == delay) {
- 		unsigned long val;
- 
--		*(led->blink_leds) |= BIT(led->pin);
--		*(led->blink_delay) = delay;
++		unsigned long val;
++
 +		/* Remove LED from the first HW blinking interval */
 +		led->blink_leds[0] &= ~BIT(led->pin);
 +
 +		/* Add LED to the second HW blinking interval */
 +		led->blink_leds[1] |= BIT(led->pin);
- 
-+		/* Cache the LED in the first HW blinking interval delay */
++
++		/* Cache second HW blinking interval delay */
 +		led->blink_delay[1] = delay;
 +
 +		/* Update the delay for the second HW blinking interval */
- 		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
--		val &= ~BCM6328_LED_FAST_INTV_MASK;
--		val |= (delay << BCM6328_LED_FAST_INTV_SHIFT);
-+		val &= ~BCM6328_LED_INTV2_MASK;
-+		val |= (delay << BCM6328_LED_INTV2_SHIFT);
- 		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
- 
--		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK);
++		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
++		val &= ~BCM6328_LED_BLINK2_MASK;
++		val |= (delay << BCM6328_LED_BLINK2_SHIFT);
++		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
++
 +		/* Set the LED to second HW blinking interval */
-+		bcm6328_led_mode(led, BCM6328_LED_MODE_INTV2);
++		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK2);
 +
  		rc = 0;
  	} else {
  		dev_dbg(led_cdev->dev,
-@@ -363,11 +412,13 @@ static int bcm6328_leds_probe(struct pla
+@@ -363,11 +414,13 @@ static int bcm6328_leds_probe(struct pla
  	if (!lock)
  		return -ENOMEM;
  
 -	blink_leds = devm_kzalloc(dev, sizeof(*blink_leds), GFP_KERNEL);
-+	blink_leds = devm_kcalloc(dev, BCM6328_LED_INTERVAL_NUM,
++	blink_leds = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,
 +				  sizeof(*blink_leds), GFP_KERNEL);
  	if (!blink_leds)
  		return -ENOMEM;
  
 -	blink_delay = devm_kzalloc(dev, sizeof(*blink_delay), GFP_KERNEL);
-+	blink_delay = devm_kcalloc(dev, BCM6328_LED_INTERVAL_NUM,
++	blink_delay = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,
 +				   sizeof(*blink_delay), GFP_KERNEL);
  	if (!blink_delay)
  		return -ENOMEM;