ramips: Add support for GL-MT300A

This patches adds support for GL-MT300A.
GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM,
Two LANs, USB, UART and MMC daughter board.

SVN-Revision: 48992

7 files changed, 190 insertions, 0 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 8fd50fedc7..536a363d92 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -137,6 +137,9 @@ fonera20n)
 	set_usb_led "$board:orange:usb"
 	set_wifi_led "$board:orange:wifi"
 	;;
+gl-mt300a)
+	set_wifi_led "$board:wlan"
+	;;
 hc5661)
 	ucidef_set_led_default "system" "system" "$board:blue:system" "1"
 	ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index ac5a312d84..74599adf5d 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -113,6 +113,7 @@ ramips_setup_interfaces()
 	dir-860l-b1|\
 	f5d8235-v1|\
 	f5d8235-v2|\
+	gl-mt300a|\
 	hg255d|\
 	mzk-wdpr|\
 	jhr-n805r|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 3fdb5627e3..ba27c1436d 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -175,6 +175,9 @@ ramips_board_detect() {
 	*"FreeStation5")
 		name="freestation5"
 		;;
+	*"GL-MT300A")
+		name="gl-mt300a"
+		;;
 	*"HC5661")
 		name="hc5661"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index e01f9ce7f6..876416ea81 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -56,6 +56,7 @@ platform_check_image() {
 	firewrt|\
 	fonera20n|\
 	freestation5|\
+	gl-mt300a|\
 	hc5*61|\
 	hg255d|\
 	hlk-rm04|\
diff --git a/target/linux/ramips/dts/GL-MT300A.dts b/target/linux/ramips/dts/GL-MT300A.dts
new file mode 100644
index 0000000000..c1eb0a9818
--- /dev/null
+++ b/target/linux/ramips/dts/GL-MT300A.dts
@@ -0,0 +1,164 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "GL-MT300A", "ralink,mt7620a-soc";
+	model = "GL-MT300A";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	palmbus@10000000 {
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		gpio1: gpio@638 {
+			status = "okay";
+		};
+
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+		
+		gpio3: gpio@688 {
+		      status = "okay";
+		 };
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0xf80000>;
+				};
+
+				partition@ff0000 {
+					label = "art";
+					reg = <0xff0000 0x10000>;
+				};
+			};
+		};
+	};
+
+	sdhci@10130000 {
+		status = "okay";
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	ethernet@10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+		mtd-mac-address = <&factory 0x4000>;
+		ralink,port-map = "wllll";
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	pcie@10140000 {
+		status = "okay";
+
+		pcie-bridge {
+			mt76@0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "wled","ephy","uartf","i2c";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wan {
+			label = "gl-mt300a:wan";
+			gpios = <&gpio2 0 1>;
+		};
+
+		lan {
+			label = "gl-mt300a:lan";
+			gpios = <&gpio2 1 1>;
+		};
+
+		wlan {
+			label = "gl-mt300a:wlan";
+			gpios = <&gpio3 0 1>;
+		};
+
+		usb {
+			label = "gl-mt300a:usb";
+			gpios = <&gpio0 7 1>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 1>;
+			linux,code = <0x198>;
+		};
+
+		BTN_0 {
+			label = "BTN_0";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x100>;
+		};
+
+  	    BTN_1 {
+			label = "BTN_1";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x101>;
+		};
+ 	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index e85c57470b..fb7407b5ba 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -993,6 +993,7 @@ Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-
 Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
 Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
 Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI)
+Image/Build/Profile/GL-MT300A=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300a,GL-MT300A)
 Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
 Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1)
 Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
@@ -1036,6 +1037,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WRTNODE,$(1))
 	$(call Image/Build/Profile/WT3020,$(1))
 	$(call Image/Build/Profile/MIWIFI-MINI,$(1))
+	$(call Image/Build/Profile/GL-MT300A,$(1))
 	$(call Image/Build/Profile/ZTE-Q7,$(1))
 	$(call Image/Build/Profile/YOUKU-YK1,$(1))
 	$(call Image/Build/Profile/ZBT-WA05,$(1))
diff --git a/target/linux/ramips/mt7620/profiles/gli.mk b/target/linux/ramips/mt7620/profiles/gli.mk
new file mode 100644
index 0000000000..53e2e9d578
--- /dev/null
+++ b/target/linux/ramips/mt7620/profiles/gli.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/GL-MT300A
+	NAME:=GL-MT300A 
+	PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76
+endef
+
+define Profile/GL-MT300A/Description
+	Support for gl-mt300a Router
+endef
+$(eval $(call Profile,GL-MT300A))