mvebu: add some more flash driver fixes

Disable marvell,nand-keep-config property on WRT1900AC to allow the
flash driver to properly probe the chip

Signed-off-by: Felix Fietkau <nbd@nbd.name>

3 files changed, 156 insertions, 0 deletions

diff --git a/target/linux/mvebu/patches-4.4/021-mtd-pxa3xx_nand-Increase-the-initial-chunk-size.patch b/target/linux/mvebu/patches-4.4/021-mtd-pxa3xx_nand-Increase-the-initial-chunk-size.patch
new file mode 100644
index 0000000000..f928f46cc6
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/021-mtd-pxa3xx_nand-Increase-the-initial-chunk-size.patch
@@ -0,0 +1,42 @@
+From: =?UTF-8?q?Ezequiel=20Garc=C3=ADa?= <ezequiel@vanguardiasur.com.ar>
+Date: Wed, 4 Nov 2015 13:13:41 -0300
+Subject: [PATCH] mtd: pxa3xx_nand: Increase the initial chunk size
+
+The chunk size represents the size of the data chunks, which
+is used by the controllers that allow to split transfered data.
+
+However, the initial chunk size is used in a non-splitted way,
+during device identification. Therefore, it must be large enough
+for all the NAND commands issued during device identification.
+This includes NAND_CMD_PARAM which was recently changed to
+transfer up to 2048 bytes (for the redundant parameter pages).
+
+Thus, the initial chunk size should be 2048 as well.
+
+On Armada 370/XP platforms (NFCv2) booted without the keep-config
+devicetree property, this commit fixes a timeout on the NAND_CMD_PARAM
+command:
+
+  [..]
+  pxa3xx-nand f10d0000.nand: This platform can't do DMA on this device
+  pxa3xx-nand f10d0000.nand: Wait time out!!!
+  nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x38
+  nand: Micron MT29F8G08ABABAWP
+  nand: 1024 MiB, SLC, erase size: 512 KiB, page size: 4096, OOB size: 224
+
+Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+---
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -1636,7 +1636,7 @@ static int pxa3xx_nand_scan(struct mtd_i
+ 		goto KEEP_CONFIG;
+ 
+ 	/* Set a default chunk size */
+-	info->chunk_size = 512;
++	info->chunk_size = PAGE_CHUNK_SIZE;
+ 
+ 	ret = pxa3xx_nand_config_flash(info);
+ 	if (ret)
diff --git a/target/linux/mvebu/patches-4.4/022-mtd-pxa3xx_nand-Fix-initial-controller-configuration.patch b/target/linux/mvebu/patches-4.4/022-mtd-pxa3xx_nand-Fix-initial-controller-configuration.patch
new file mode 100644
index 0000000000..260e7dc1bc
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/022-mtd-pxa3xx_nand-Fix-initial-controller-configuration.patch
@@ -0,0 +1,104 @@
+From: =?UTF-8?q?Ezequiel=20Garc=C3=ADa?= <ezequiel@vanguardiasur.com.ar>
+Date: Wed, 4 Nov 2015 13:13:42 -0300
+Subject: [PATCH] mtd: pxa3xx_nand: Fix initial controller configuration
+
+The Data Flash Control Register (NDCR) contains two types
+of parameters: those that are needed for device identification,
+and those that can only be set after device identification.
+
+Therefore, the driver can't set them all at once and instead
+needs to configure the first group before nand_scan_ident()
+and the second group later.
+
+Let's split pxa3xx_nand_config in two halves, and set the
+parameters that depend on the device geometry once this is known.
+
+Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+---
+
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -1419,34 +1419,43 @@ static int pxa3xx_nand_waitfunc(struct m
+ 	return NAND_STATUS_READY;
+ }
+ 
+-static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info)
++static int pxa3xx_nand_config_ident(struct pxa3xx_nand_info *info)
+ {
+ 	struct platform_device *pdev = info->pdev;
+ 	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+-	struct pxa3xx_nand_host *host = info->host[info->cs];
+-	struct mtd_info *mtd = host->mtd;
+-	struct nand_chip *chip = mtd->priv;
+ 
+-	/* configure default flash values */
++	/* Configure default flash values */
++	info->chunk_size = PAGE_CHUNK_SIZE;
+ 	info->reg_ndcr = 0x0; /* enable all interrupts */
+ 	info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ 	info->reg_ndcr |= NDCR_RD_ID_CNT(READ_ID_BYTES);
+-	info->reg_ndcr |= NDCR_SPARE_EN; /* enable spare by default */
++	info->reg_ndcr |= NDCR_SPARE_EN;
++
++	return 0;
++}
++
++static void pxa3xx_nand_config_tail(struct pxa3xx_nand_info *info)
++{
++	struct pxa3xx_nand_host *host = info->host[info->cs];
++	struct mtd_info *mtd = host->mtd;
++	struct nand_chip *chip = mtd->priv;
++
+ 	info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+ 	info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
+ 	info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
+-
+-	return 0;
+ }
+ 
+ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
+ {
++	struct platform_device *pdev = info->pdev;
++	struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ 	uint32_t ndcr = nand_readl(info, NDCR);
+ 
+ 	/* Set an initial chunk size */
+ 	info->chunk_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
+ 	info->reg_ndcr = ndcr &
+ 		~(NDCR_INT_MASK | NDCR_ND_ARB_EN | NFCV1_NDCR_ARB_CNTL);
++	info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ 	info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ 	info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ 	return 0;
+@@ -1635,10 +1644,7 @@ static int pxa3xx_nand_scan(struct mtd_i
+ 	if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
+ 		goto KEEP_CONFIG;
+ 
+-	/* Set a default chunk size */
+-	info->chunk_size = PAGE_CHUNK_SIZE;
+-
+-	ret = pxa3xx_nand_config_flash(info);
++	ret = pxa3xx_nand_config_ident(info);
+ 	if (ret)
+ 		return ret;
+ 
+@@ -1651,7 +1657,6 @@ static int pxa3xx_nand_scan(struct mtd_i
+ 	}
+ 
+ KEEP_CONFIG:
+-	info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ 	if (info->reg_ndcr & NDCR_DWIDTH_M)
+ 		chip->options |= NAND_BUSWIDTH_16;
+ 
+@@ -1736,6 +1741,10 @@ KEEP_CONFIG:
+ 		host->row_addr_cycles = 3;
+ 	else
+ 		host->row_addr_cycles = 2;
++
++	if (!pdata->keep_config)
++		pxa3xx_nand_config_tail(info);
++
+ 	return nand_scan_tail(mtd);
+ }
+ 
diff --git a/target/linux/mvebu/patches-4.4/104-linksys_mamba_disable_keep_config.patch b/target/linux/mvebu/patches-4.4/104-linksys_mamba_disable_keep_config.patch
new file mode 100644
index 0000000000..4c6b3115ed
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/104-linksys_mamba_disable_keep_config.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+@@ -298,7 +298,6 @@
+ 			nand@d0000 {
+ 				status = "okay";
+ 				num-cs = <1>;
+-				marvell,nand-keep-config;
+ 				marvell,nand-enable-arbiter;
+ 				nand-on-flash-bbt;
+ 				nand-ecc-strength = <4>;