mcs814x: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45372

44 files changed, 0 insertions, 3969 deletions

diff --git a/target/linux/mcs814x/config-3.14 b/target/linux/mcs814x/config-3.14
deleted file mode 100644
index 0830c24b13..0000000000
--- a/target/linux/mcs814x/config-3.14
+++ /dev/null
@@ -1,184 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_MCS814X=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-# CONFIG_ARM_THUMB is not set
-# CONFIG_ARPD is not set
-CONFIG_BCMA_POSSIBLE=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CMDLINE="earlyprintk"
-CONFIG_CMDLINE_EXTEND=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_ARM926T=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_NONE=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_FIQ=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MCS814X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MCS814X=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_DOMAIN=y
-# CONFIG_ISDN is not set
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KALLSYMS=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LIBCRC32C=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_DLAN_USB_EXT=y
-CONFIG_MACH_RBT_832=y
-CONFIG_MCS8140=y
-CONFIG_MCS814X_PHY=y
-# CONFIG_MCS814X_WATCHDOG is not set
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MACH_MEMORY_H=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_KEY=y
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NUPORT_ETHERNET_DRIVER=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_SWAP is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_UID16=y
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-# CONFIG_VLAN_8021Q is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_WEXT_PRIV is not set
-# CONFIG_WEXT_SPY is not set
-# CONFIG_WIRELESS_EXT is not set
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/dlan-usb-extender.dts b/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/dlan-usb-extender.dts
deleted file mode 100644
index 0c85b94c0a..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/dlan-usb-extender.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * dlan-usb-extender.dts - Device Tree file for Devolo dLAN USB Extender
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-
-/dts-v1/;
-/include/ "mcs8140.dtsi"
-
-/ {
-	model = "Devolo dLAN USB Extender";
-	compatible = "devolo,dlan-usb-extender", "moschip,mcs8140", "moschip,mcs814x";
-
-	chosen {
-		bootargs = "mem=16M console=ttyS0,57600 earlyprintk";
-	};
-
-	ahb {
-		vci {
-			eth0: ethernet@40084000 {
-				phy = <&phy0>;
-				phy-mode = "mii";
-
-				phy0: ethernet-phy@0 {
-					reg = <8>;
-				};
-			};
-
-			adc {
-				sdram: memory@0,0 {
-					reg = <0 0 0x1000000>;
-				};
-
-				nor: flash@7,0 {
-
-					partition@0 {
-						label = "ArmBoot";
-						reg = <0 0x30000>;
-					};
-					partition@30000 {
-						label = "Config1";
-						reg = <0x30000 0x10000>;
-					};
-					partition@40000 {
-						label = "Config2";
-						reg = <0x40000 0x10000>;
-					};
-					partition@50000 {
-						label = "kernel";
-						reg = <0x50000 0x100000>;
-					};
-					partition@150000 {
-						label = "rootfs";
-						reg = <0x150000 0x3C0000>;
-					};
-					partition@50001 {
-						label = "linux";
-						reg = <0x50000 0x4C0000>;
-					};
-				};
-			};
-
-			leds {
-				compatible = "gpio-leds";
-
-				usb {
-					label = "dlan-usb-extender:green:usb";
-					gpios = <&gpio 19 0>;	// gpio 19 active high
-				};
-			};
-		};
-	};
-};
-
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/mcs8140.dtsi b/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/mcs8140.dtsi
deleted file mode 100644
index b7e8eb4fa4..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/mcs8140.dtsi
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * mcs8140.dtsi - Device Tree Include file for Moschip MCS8140 family SoC
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Moschip MCS8140 family SoC";
-	compatible = "moschip,mcs8140";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uart0;
-		eth0 = &eth0;
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vci {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			eth0: ethernet@40084000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				compatible = "moschip,nuport-mac";
-				reg = <0x40084000 0xd8		// mac
-					0x40080000 0x58>;	// dma channels
-				interrupts = <4 5 29>;	/* tx, rx, link */
-				nuport-mac,buffer-shifting;
-				nuport-mac,link-activity = <0>;
-			};
-
-			tso@40088000 {
-				reg = <0x40088000 0x1c>;
-				interrupts = <7>;
-			};
-
-			i2s@4008c000 {
-				compatible = "moschip,mcs814x-i2s";
-				reg = <0x4008c000 0x18>;
-				interrupts = <8>;
-			};
-
-			ipsec@40094000 {
-				compatible = "moschip,mcs814x-ipsec";
-				reg = <0x40094000 0x1d8>;
-				interrupts = <16>;
-			};
-
-			rng@4009c000 {
-				compatible = "moschip,mcs814x-rng";
-				reg = <0x4009c000 0x8>;
-			};
-
-			memc@400a8000 {
-				reg = <0x400a8000 0x58>;
-			};
-
-			list-proc@400ac0c0 {
-				reg = <0x400ac0c0 0x38>;
-				interrupts = <19 27>;		// done, error
-			};
-
-			gpio: gpio@400d0000 {
-				compatible = "moschip,mcs814x-gpio";
-				reg = <0x400d0000 0x670>;
-				interrupts = <10>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				num-gpios = <20>;
-			};
-
-			eepio: gpio@400d4000 {
-				compatible = "moschip,mcs814x-gpio";
-				reg = <0x400d4000 0x470>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				num-gpios = <4>;
-			};
-
-			uart0: serial@400dc000 {
-				compatible = "ns16550";
-				reg = <0x400dc000 0x20>;
-				clock-frequency = <50000000>;
-				reg-shift = <2>;
-				interrupts = <21>;
-				status = "okay";
-			};
-
-			intc: interrupt-controller@400e4000 {
-				#interrupt-cells = <1>;
-				compatible = "moschip,mcs814x-intc";
-				interrupt-controller;
-				interrupt-parent;
-				reg = <0x400e4000 0x48>;
-			};
-
-			m2m@400e8000 {
-				reg = <0x400e8000 0x24>;
-				interrupts = <17>;
-			};
-
-			eth-filters@400ec000 {
-				reg = <0x400ec000 0x80>;
-			};
-
-			timer: timer@400f800c {
-				compatible = "moschip,mcs814x-timer";
-				interrupts = <0>;
-				reg = <0x400f800c 0x8>;
-			};
-
-			watchdog@400f8014 {
-				compatible = "moschip,mcs814x-wdt";
-				reg = <0x400f8014 0x8>;
-			};
-
-			adc {
-				compatible = "simple-bus";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				// 8 64MB chip-selects
-				ranges = <0 0 0x00000000 0x4000000	// sdram
-					  1 0 0x04000000 0x4000000	// sdram
-					  2 0 0x08000000 0x4000000	// reserved
-					  3 0 0x0c000000 0x4000000	// flash/localbus
-					  4 0 0x10000000 0x4000000	// flash/localbus
-					  5 0 0x14000000 0x4000000	// flash/localbus
-					  6 0 0x18000000 0x4000000	// flash/localbus
-					  7 0 0x1c000000 0x4000000>;	// flash/localbus
-
-				sdram: memory@0,0 {
-					reg = <0 0 0>;
-				};
-
-				nor: flash@7,0 {
-					reg = <7 0 0x4000000>;
-					compatible = "cfi-flash";
-					bank-width = <1>;		// 8-bit external flash
-					#address-cells = <1>;
-					#size-cells = <1>;
-                                };
-                        };
-
-			usb0: ehci@400fc000 {
-				compatible = "moschip,mcs814x-ehci", "usb-ehci";
-				reg = <0x400fc000 0x74>;
-				interrupts = <2>;
-			};
-
-			usb1: ohci@400fd000 {
-				compatible = "moschip,mcs814x-ohci", "ohci-le";
-				reg = <0x400fd000 0x74>;
-				interrupts = <11>;
-			};
-
-			usb2: ohci@400fe000 {
-				compatible = "moschip,mcs814x-ohci", "ohci-le";
-				reg = <0x400fe000 0x74>;
-				interrupts = <12>;
-			};
-
-			usb3: otg@400ff000 {
-				compatible = "moschip,msc814x-otg", "usb-otg";
-				reg = <0x400ff000 0x1000>;
-				interrupts = <13>;
-			};
-		};
-
-	};
-};
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/rbt-832.dts b/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/rbt-832.dts
deleted file mode 100644
index 9949c8ecf3..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/boot/dts/rbt-832.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * rbt-832.dts - Device Tree file for Tigal RBT-832
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-
-/dts-v1/;
-/include/ "mcs8140.dtsi"
-
-/ {
-	model = "Tigal RBT-832";
-	compatible = "tigal,rbt-832", "moschip,mcs8140", "moschip,mcs814x";
-
-	chosen {
-		bootargs = "mem=32M console=ttyS0,115200 earlyprintk";
-	};
-
-	ahb {
-		vci {
-			eth0: ethernet@40084000 {
-				nuport-mac,link-activity = <0x01>;
-				phy = <&phy0>;
-				phy-mode = "mii";
-
-				phy0: ethernet-phy@0 {
-					reg = <1>;
-				};
-			};
-
-			adc {
-				sdram: memory@0,0 {
-					reg = <0 0 0x2000000>;
-				};
-
-				nor: flash@7,0 {
-
-					partition@0 {
-						label = "ArmBoot";
-						reg = <0 0x40000>;
-					};
-					partition@30000 {
-						label = "Enviroment";
-						reg = <0x40000 0x20000>;
-					};
-					partition@50000 {
-						label = "bZimage";
-						reg = <0x60000 0x1a0000>;
-					};
-					partition@150000 {
-						label = "UserFS";
-						reg = <0x200000 0x600000>;
-					};
-				};
-			};
-
-			leds {
-				compatible = "gpio-leds";
-
-				ethernet {
-					label = "rbt-832:red:ethernet";
-					gpios = <&gpio 0 0>;	// gpio 0 active high
-				};
-
-				usb0 {
-					label = "rbt-832:red:usb0";
-					gpios = <&gpio 4 0>;	// gpio 4 active high
-				};
-
-				usb1 {
-					label = "rbt-832:red:usb1";
-					gpios = <&gpio 3 0>;	// gpio 3 active high
-				};
-
-				usb2 {
-					label = "rbt-832:red:usb2";
-					gpios = <&gpio 2 0>;	// gpio 2 active high
-				};
-
-				usb3 {
-					label = "rbt-832:red:usb3";
-					gpios = <&gpio 1 0>;	// gpio 1 active high
-				};
-			};
-		};
-	};
-};
-
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Kconfig b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Kconfig
deleted file mode 100644
index 372c9b87b9..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-if ARCH_MCS814X
-
-config MCS8140
-	bool
-	select CPU_ARM926T
-
-menu "Moschip MCS8140 boards"
-
-config MACH_DLAN_USB_EXT
-	bool "Devolo dLAN USB Extender"
-	select MCS8140
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_GPIO
-	help
-	  Machine support for the Devolo dLAN USB Extender
-
-config MACH_RBT_832
-	bool "Tigal RBT-832"
-	select MCS8140
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_GPIO
-	help
-	  Machine support for the Tigal RBT-832 board
-
-endmenu
-
-endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Makefile b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Makefile
deleted file mode 100644
index 68c5f4a9f5..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y += clock.o
-obj-y += common.o
-obj-y += irq.o
-obj-y += timer.o
-obj-y += board-mcs8140-dt.o
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Makefile.boot b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Makefile.boot
deleted file mode 100644
index b5725078d7..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-    zreladdr-y := 0x00008000
-
-dtb-$(CONFIG_MACH_DLAN_USB_EXT) += dlan-usb-extender.dtb
-dtb-$(CONFIG_MACH_RBT_832) += rbt-832.dtb
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/board-mcs8140-dt.c b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/board-mcs8140-dt.c
deleted file mode 100644
index 0d11450c73..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/board-mcs8140-dt.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Setup code for Moschip MCS8140-based board using Device Tree
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/irqdomain.h>
-#include <linux/of_platform.h>
-
-#include "common.h"
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-static void __init mcs814x_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	mcs814x_init_machine();
-}
-
-static const char *mcs8140_dt_board_compat[] __initdata = {
-	"moschip,mcs8140",
-	NULL,	/* sentinel */
-};
-
-DT_MACHINE_START(mcs8140_dt, "Moschip MCS8140 board")
-	/* Maintainer: Florian Fainelli <florian@openwrt.org> */
-	.map_io		= mcs814x_map_io,
-	.init_early	= mcs814x_clk_init,
-	.init_irq	= mcs814x_of_irq_init,
-	.init_time	= mcs814x_timer_init,
-	.init_machine	= mcs814x_dt_device_init,
-	.restart	= mcs814x_restart,
-	.dt_compat	= mcs8140_dt_board_compat,
-	.handle_irq	= mcs814x_handle_irq,
-MACHINE_END
-
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/clock.c b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/clock.c
deleted file mode 100644
index 413bfecaa1..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/clock.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Moschip MCS814x clock routines
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-
-#include <mach/mcs814x.h>
-
-#include "common.h"
-
-#define KHZ	1000
-#define MHZ	(KHZ * KHZ)
-
-struct clk_ops {
-	unsigned long (*get_rate)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate);
-	struct clk *(*get_parent)(struct clk *clk);
-	int (*enable)(struct clk *clk, int enable);
-};
-
-struct clk {
-	struct clk *parent;     	/* parent clk */
-	unsigned long rate;     	/* clock rate in Hz */
-	unsigned long divider;		/* clock divider */
-	u32 usecount;			/* reference count */
-	struct clk_ops *ops;		/* clock operation */
-	u32 enable_reg;			/* clock enable register */
-	u32 enable_mask;		/* clock enable mask */
-};
-
-static unsigned long clk_divide_parent(struct clk *clk)
-{
-	if (clk->parent && clk->divider)
-		return clk_get_rate(clk->parent) / clk->divider;
-	else
-		return 0;
-}
-
-static int clk_local_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	/* no enable_reg means the clock is always enabled */
-	if (!clk->enable_reg)
-		return 0;
-
-	tmp = readl_relaxed(mcs814x_sysdbg_base + clk->enable_reg);
-	if (!enable)
-		tmp &= ~clk->enable_mask;
-	else
-		tmp |= clk->enable_mask;
-
-	writel_relaxed(tmp, mcs814x_sysdbg_base + clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk_ops default_clk_ops = {
-	.get_rate	= clk_divide_parent,
-	.enable		= clk_local_onoff_enable,
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static const unsigned long cpu_freq_table[] = {
-	175000,
-	300000,
-	125000,
-	137500,
-	212500,
-	250000,
-	162500,
-	187500,
-	162500,
-	150000,
-	225000,
-	237500,
-	200000,
-	262500,
-	275000,
-	287500
-};
-
-static struct clk clk_cpu;
-
-/* System clock is fixed at 50Mhz */
-static struct clk clk_sys = {
-	.rate	= 50 * MHZ,
-};
-
-static struct clk clk_sdram;
-
-static struct clk clk_timer0 = {
-	.parent	= &clk_sdram,
-	.divider = 2,
-	.ops	= &default_clk_ops,
-};
-
-static struct clk clk_timer1_2 = {
-	.parent	= &clk_sys,
-};
-
-/* Watchdog clock is system clock / 128 */
-static struct clk clk_wdt = {
-	.parent	= &clk_sys,
-	.divider = 128,
-	.ops	= &default_clk_ops,
-};
-
-static struct clk clk_emac = {
-	.ops		= &default_clk_ops,
-	.enable_reg	= SYSDBG_SYSCTL,
-	.enable_mask	= SYSCTL_EMAC,
-};
-
-static struct clk clk_ephy = {
-	.ops		= &default_clk_ops,
-	.enable_reg	= SYSDBG_PLL_CTL,
-	.enable_mask	= ~SYSCTL_EPHY,	/* active low */
-};
-
-static struct clk clk_cipher = {
-	.ops		= &default_clk_ops,
-	.enable_reg	= SYSDBG_SYSCTL,
-	.enable_mask	= SYSCTL_CIPHER,
-};
-
-#define CLK(_dev, _con, _clk)	\
-{ .dev_id = (_dev), .con_id = (_con), .clk = (_clk) },
-
-static struct clk_lookup mcs814x_chip_clks[] = {
-	CLK("cpu", NULL, &clk_cpu)
-	CLK("sys", NULL, &clk_sys)
-	CLK("sdram", NULL, &clk_sdram)
-	/* 32-bits timer0 */
-	CLK("timer0", NULL, &clk_timer0)
-	/* 16-bits timer1 */
-	CLK("timer1", NULL, &clk_timer1_2)
-	/* 64-bits timer2, same as timer 1 */
-	CLK("timer2", NULL, &clk_timer1_2)
-	CLK(NULL, "wdt", &clk_wdt)
-	CLK(NULL, "emac", &clk_emac)
-	CLK(NULL, "ephy", &clk_ephy)
-	CLK(NULL, "cipher", &clk_cipher)
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	WARN_ON(!clk->usecount);
-
-	if (clk->usecount > 0) {
-		clk->usecount--;
-
-		if ((clk->usecount == 0) && (clk->ops->enable))
-			clk->ops->enable(clk, 0);
-
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->parent)
-		ret = local_clk_enable(clk->parent);
-
-	if (ret)
-		return ret;
-
-	if ((clk->usecount == 0) && (clk->ops->enable))
-		ret = clk->ops->enable(clk, 1);
-
-	if (!ret)
-		clk->usecount++;
-	else if (clk->parent && clk->parent->ops->enable)
-		local_clk_disable(clk->parent);
-
-	return ret;
-}
-
-int clk_enable(struct clk *clk)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	ret = local_clk_enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	local_clk_disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return 0;
-
-	if (clk->rate)
-		return clk->rate;
-
-	if (clk->ops && clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return NULL;
-
-	if (!clk->ops || !clk->ops->get_parent)
-		return clk->parent;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	clk->parent = clk->ops->get_parent(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-void __init mcs814x_clk_init(void)
-{
-	u32 bs1;
-	u8 cpu_freq;
-
-	clkdev_add_table(mcs814x_chip_clks, ARRAY_SIZE(mcs814x_chip_clks));
-
-	/* read the bootstrap registers to know the exact clocking scheme */
-	bs1 = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS1);
-	cpu_freq = (bs1 >> CPU_FREQ_SHIFT) & CPU_FREQ_MASK;
-
-	pr_info("CPU frequency: %lu (kHz)\n", cpu_freq_table[cpu_freq]);
-	clk_cpu.rate = cpu_freq * KHZ;
-
-	/* read SDRAM frequency */
-	if (bs1 & SDRAM_FREQ_BIT)
-		clk_sdram.rate = 100 * MHZ;
-	else
-		clk_sdram.rate = 133 * MHZ;
-
-	pr_info("SDRAM frequency: %lu (MHz)\n", clk_sdram.rate / MHZ);
-}
-
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/common.c b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/common.c
deleted file mode 100644
index d44f17155a..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/common.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * arch/arm/mach-mcs814x/common.c
- *
- * Core functions for Moschip MCS814x SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/mcs814x.h>
-#include <mach/cpu.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-void __iomem *mcs814x_sysdbg_base;
-
-static struct map_desc mcs814x_io_desc[] __initdata = {
-	{
-		.virtual	= MCS814X_IO_BASE,
-		.pfn		= __phys_to_pfn(MCS814X_IO_START),
-		.length		= MCS814X_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-struct cpu_mode {
-	const char *name;
-	int gpio_start;
-	int gpio_end;
-};
-
-static const struct cpu_mode cpu_modes[] = {
-	{
-		.name		= "I2S",
-		.gpio_start	= 4,
-		.gpio_end	= 8,
-	},
-	{
-		.name		= "UART",
-		.gpio_start	= 4,
-		.gpio_end	= 9,
-	},
-	{
-		.name		= "External MII",
-		.gpio_start	= 0,
-		.gpio_end	= 16,
-	},
-	{
-		.name		= "Normal",
-		.gpio_start	= -1,
-		.gpio_end	= -1,
-	},
-};
-
-static void mcs814x_eth_hardware_filter_set(u8 value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(MCS814X_VIRT_BASE + MCS814X_DBGLED);
-	if (value)
-		reg |= 0x80;
-	else
-		reg &= ~0x80;
-	writel_relaxed(reg, MCS814X_VIRT_BASE + MCS814X_DBGLED);
-}
-
-static void mcs814x_eth_led_cfg_set(u8 cfg)
-{
-	u32 reg;
-
-	reg = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS2);
-	reg &= ~LED_CFG_MASK;
-	reg |= cfg;
-	writel_relaxed(reg, mcs814x_sysdbg_base + SYSDBG_BS2);
-}
-
-static void mcs814x_eth_buffer_shifting_set(u8 value)
-{
-	u8 reg;
-
-	reg = readb_relaxed(mcs814x_sysdbg_base + SYSDBG_SYSCTL_MAC);
-	if (value)
-		reg |= BUF_SHIFT_BIT;
-	else
-		reg &= ~BUF_SHIFT_BIT;
-	writeb_relaxed(reg, mcs814x_sysdbg_base + SYSDBG_SYSCTL_MAC);
-}
-
-static struct of_device_id mcs814x_eth_ids[] __initdata = {
-	{ .compatible = "moschip,nuport-mac", },
-	{ /* sentinel */ },
-};
-
-/* Configure platform specific knobs based on ethernet device node
- * properties */
-static void mcs814x_eth_init(void)
-{
-	struct device_node *np;
-	const unsigned int *intspec;
-
-	np = of_find_matching_node(NULL, mcs814x_eth_ids);
-	if (!np)
-		return;
-
-	/* hardware filter must always be enabled */
-	mcs814x_eth_hardware_filter_set(1);
-
-	intspec = of_get_property(np, "nuport-mac,buffer-shifting", NULL);
-	if (!intspec)
-		mcs814x_eth_buffer_shifting_set(0);
-	else
-		mcs814x_eth_buffer_shifting_set(1);
-
-	intspec = of_get_property(np, "nuport-mac,link-activity", NULL);
-	if (intspec)
-		mcs814x_eth_led_cfg_set(be32_to_cpup(intspec));
-
-	of_node_put(np);
-}
-
-void __init mcs814x_init_machine(void)
-{
-	u32 bs2, cpu_mode;
-	int gpio;
-
-	bs2 = readl_relaxed(mcs814x_sysdbg_base + SYSDBG_BS2);
-	cpu_mode = (bs2 >> CPU_MODE_SHIFT) & CPU_MODE_MASK;
-
-	pr_info("CPU mode: %s\n", cpu_modes[cpu_mode].name);
-
-	/* request the gpios since the pins are muxed for functionnality */
-	for (gpio = cpu_modes[cpu_mode].gpio_start;
-		gpio == cpu_modes[cpu_mode].gpio_end; gpio++) {
-		if (gpio != -1)
-			gpio_request(gpio, cpu_modes[cpu_mode].name);
-	}
-
-	mcs814x_eth_init();
-}
-
-void __init mcs814x_map_io(void)
-{
-	iotable_init(mcs814x_io_desc, ARRAY_SIZE(mcs814x_io_desc));
-
-	mcs814x_sysdbg_base = ioremap(MCS814X_IO_START + MCS814X_SYSDBG,
-					MCS814X_SYSDBG_SIZE);
-	if (!mcs814x_sysdbg_base)
-		panic("unable to remap sysdbg base");
-}
-
-void mcs814x_restart(enum reboot_mode mode, const char *cmd)
-{
-	writel_relaxed(~(1 << 31), mcs814x_sysdbg_base);
-}
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/common.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/common.h
deleted file mode 100644
index c9e4039584..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/common.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ARCH_MCS814X_COMMON_H
-#define __ARCH_MCS814X_COMMON_H
-
-#include <asm/mach/time.h>
-
-void mcs814x_map_io(void);
-void mcs814x_clk_init(void);
-void mcs814x_of_irq_init(void);
-void mcs814x_init_machine(void);
-void mcs814x_handle_irq(struct pt_regs *regs);
-void mcs814x_restart(char mode, const char *cmd);
-void mcs814x_timer_init(void);
-extern void __iomem *mcs814x_sysdbg_base;
-
-#endif /* __ARCH_MCS814X_COMMON_H */
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/cpu.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/cpu.h
deleted file mode 100644
index 1ef3c4a036..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/cpu.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-#include <asm/cputype.h>
-
-#define MCS8140_ID	0x41069260	/* ARM926EJ-S */
-#define MCS814X_MASK	0xff0ffff0
-
-#ifdef CONFIG_MCS8140
-/* Moschip MCS8140 is based on an ARM926EJ-S core */
-#define soc_is_mcs8140()	((read_cpuid_id() & MCS814X_MASK) == MCS8140_ID)
-#else
-#define soc_is_mcs8140()	(0)
-#endif /* !CONFIG_MCS8140 */
-
-#endif /* __ASM_ARCH_CPU_H__ */
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/debug-macro.S b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/debug-macro.S
deleted file mode 100644
index 93ecea4ed2..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <mach/mcs814x.h>
-
-                .macro  addruart, rp, rv, tmp
-		ldr	\rp, =MCS814X_PHYS_BASE
-		ldr	\rv, =MCS814X_VIRT_BASE
-		orr	\rp, \rp, #MCS814X_UART
-		orr	\rv, \rv, #MCS814X_UART
-                .endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/entry-macro.S b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/entry-macro.S
deleted file mode 100644
index 16d2d6d1af..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <mach/mcs814x.h>
-                .macro  disable_fiq
-                .endm
-
-		.macro arch_ret_to_user, tmp1, tmp2
-		.endm
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/gpio.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/gpio.h
deleted file mode 100644
index 20240c2ea2..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/gpio.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-/* new generic GPIO API */
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-#endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/hardware.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/hardware.h
deleted file mode 100644
index 529f648ae6..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mcs814x.h"
-
-#endif
-
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/io.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/io.h
deleted file mode 100644
index 80e56f6ca7..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-/*
- * We don't support ins[lb]/outs[lb].  Make them fault.
- */
-#define __raw_readsb(p, d, l)	do { *(int *)0 = 0; } while (0)
-#define __raw_readsl(p, d, l)	do { *(int *)0 = 0; } while (0)
-#define __raw_writesb(p, d, l)	do { *(int *)0 = 0; } while (0)
-#define __raw_writesl(p, d, l)	do { *(int *)0 = 0; } while (0)
-
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/irqs.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/irqs.h
deleted file mode 100644
index 7b9e07c1a7..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/irqs.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define FIQ_START	0
-
-#define NR_IRQS		32
-
-#endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/mcs814x.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/mcs814x.h
deleted file mode 100644
index 8252d33a7d..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/mcs814x.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_MCS814X_H
-#define __ASM_ARCH_MCS814X_H
-
-#define MCS814X_IO_BASE		0xF0000000
-#define MCS814X_IO_START	0x40000000
-#define MCS814X_IO_SIZE		0x00100000
-
-/* IRQ controller register offset */
-#define MCS814X_IRQ_ICR		0x00
-#define MCS814X_IRQ_ISR		0x04
-#define MCS814X_IRQ_MASK	0x20
-#define MCS814X_IRQ_STS0	0x40
-
-#define MCS814X_PHYS_BASE	0x40000000
-#define MCS814X_VIRT_BASE	MCS814X_IO_BASE
-
-#define MCS814X_UART    	0x000DC000
-#define MCS814X_DBGLED  	0x000EC000
-#define MCS814X_SYSDBG  	0x000F8000
-#define MCS814X_SYSDBG_SIZE	0x50
-
-/* System configuration and bootstrap registers */
-#define SYSDBG_BS1		0x00
-#define  CPU_FREQ_SHIFT		27
-#define  CPU_FREQ_MASK		0x0F
-#define  SDRAM_FREQ_BIT		(1 << 22)
-
-#define SYSDBG_BS2		0x04
-#define  LED_CFG_MASK		0x03
-#define  CPU_MODE_SHIFT		23
-#define  CPU_MODE_MASK		0x03
-
-#define SYSDBG_SYSCTL_MAC	0x1d
-#define  BUF_SHIFT_BIT		(1 << 0)
-
-#define SYSDBG_SYSCTL		0x08
-#define  SYSCTL_EMAC		(1 << 0)
-#define  SYSCTL_EPHY		(1 << 0) /* active low */
-#define  SYSCTL_CIPHER		(1 << 16)
-
-#define SYSDBG_PLL_CTL		0x3C
-
-#endif /* __ASM_ARCH_MCS814X_H */
-
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/memory.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/memory.h
deleted file mode 100644
index ad87c7ba6a..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-
-#endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/param.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/param.h
deleted file mode 100644
index 7ffe70b7d5..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/param.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-
-#define HZ 100
-
-#endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/system.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/system.h
deleted file mode 100644
index cf5453df25..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/system.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-#endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/timex.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/timex.h
deleted file mode 100644
index f05c8eeb6d..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2003 Artec Design Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Timex specification for MCS814X
- */
-#define CLOCK_TICK_RATE		100
-
-#endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/uncompress.h b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/uncompress.h
deleted file mode 100644
index cf3ed9a1a6..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/include/mach/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/serial_reg.h>
-#include <asm/io.h>
-#include <mach/mcs814x.h>
-#include <mach/cpu.h>
-
-#define UART_SHIFT	(2)
-
-/* cannot be static because the code will be inlined */
-void __iomem *uart_base;
-
-static inline void putc(int c)
-{
-	while (!(__raw_readb(uart_base + (UART_LSR << UART_SHIFT)) & UART_LSR_TEMT));
-	__raw_writeb(c, uart_base + (UART_TX << UART_SHIFT));
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	if (soc_is_mcs8140())
-		uart_base = (void __iomem *)(MCS814X_PHYS_BASE +MCS814X_UART);
-}
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/irq.c b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/irq.c
deleted file mode 100644
index f84c412839..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/irq.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Moschip MCS814x generic interrupt controller routines
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under the GPLv2
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/irqdomain.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-#include <mach/mcs814x.h>
-
-static void __iomem *mcs814x_intc_base;
-
-static void __init mcs814x_alloc_gc(void __iomem *base, unsigned int irq_start,
-					unsigned int num)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("mcs814x-intc", 1,
-			irq_start, base, handle_level_irq);
-	if (!gc)
-		panic("unable to allocate generic irq chip");
-
-	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_unmask_enable_reg;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->regs.mask = MCS814X_IRQ_MASK;
-	ct->regs.enable = MCS814X_IRQ_ICR;
-
-	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-		IRQ_NOREQUEST, 0);
-
-	/* Clear all interrupts */
-	writel_relaxed(0xffffffff, base + MCS814X_IRQ_ICR);
-}
-
-asmlinkage void __exception_irq_entry mcs814x_handle_irq(struct pt_regs *regs)
-{
-	u32 status, irq;
-
-	do {
-		/* read the status register */
-		status = __raw_readl(mcs814x_intc_base + MCS814X_IRQ_STS0);
-		if (!status)
-			break;
-
-		irq = ffs(status) - 1;
-		status |= (1 << irq);
-		/* clear the interrupt */
-		__raw_writel(status, mcs814x_intc_base + MCS814X_IRQ_STS0);
-		/* call the generic handler */
-		handle_IRQ(irq, regs);
-
-	} while (1);
-}
-
-static const struct of_device_id mcs814x_intc_ids[] = {
-	{ .compatible = "moschip,mcs814x-intc" },
-	{ /* sentinel */ },
-};
-
-void __init mcs814x_of_irq_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, mcs814x_intc_ids);
-	if (!np)
-		panic("unable to find compatible intc node in dtb\n");
-
-	mcs814x_intc_base = of_iomap(np, 0);
-	if (!mcs814x_intc_base)
-		panic("unable to map intc cpu registers\n");
-
-	irq_domain_add_simple(np, 32, 0, &irq_generic_chip_ops, NULL);
-
-	of_node_put(np);
-
-	mcs814x_alloc_gc(mcs814x_intc_base, 0, 32);
-}
-
diff --git a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/timer.c b/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/timer.c
deleted file mode 100644
index ff9d44aa6e..0000000000
--- a/target/linux/mcs814x/files-3.14/arch/arm/mach-mcs814x/timer.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Moschip MCS814x timer routines
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/mach/time.h>
-#include <mach/mcs814x.h>
-
-/* Timer block registers */
-#define TIMER_VAL	0x00
-#define TIMER_CTL	0x04
-#define  TIMER_CTL_EN	0x01
-#define  TIMER_CTL_DBG	0x02
-
-static u32 last_reload;
-static u32 timer_correct;
-static u32 clock_rate;
-static u32 timer_reload_value;
-static void __iomem *mcs814x_timer_base;
-
-static inline u32 ticks2usecs(u32 x)
-{
-	return x / (clock_rate / 1000000);
-}
-
-/*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static u32 mcs814x_gettimeoffset(void)
-{
-	u32 ticks = readl_relaxed(mcs814x_timer_base + TIMER_VAL);
-
-	if (ticks < last_reload)
-		return ticks2usecs(ticks + (u32)(0xffffffff - last_reload));
-	else
-		return ticks2usecs(ticks - last_reload);
-}
-
-
-static irqreturn_t mcs814x_timer_interrupt(int irq, void *dev_id)
-{
-	u32 count = readl_relaxed(mcs814x_timer_base + TIMER_VAL);
-
-	/* take into account delay up to this moment */
-	last_reload = count + timer_correct + timer_reload_value;
-
-	if (last_reload < timer_reload_value) {
-		last_reload = timer_reload_value;
-	} else {
-		if (timer_correct == 0)
-			timer_correct = readl_relaxed(mcs814x_timer_base + TIMER_VAL) - count;
-	}
-	writel_relaxed(last_reload, mcs814x_timer_base + TIMER_VAL);
-
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mcs814x_timer_irq = {
-	.name		= "mcs814x-timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= mcs814x_timer_interrupt,
-};
-
-static struct of_device_id mcs814x_timer_ids[] = {
-	{ .compatible = "moschip,mcs814x-timer" },
-	{ /* sentinel */ },
-};
-
-static void __init mcs814x_of_timer_init(void)
-{
-	struct device_node *np;
-	const unsigned int *intspec;
-
-	np = of_find_matching_node(NULL, mcs814x_timer_ids);
-	if (!np)
-		panic("unable to find compatible timer node in dtb");
-
-	mcs814x_timer_base = of_iomap(np, 0);
-	if (!mcs814x_timer_base)
-		panic("unable to remap timer cpu registers");
-
-	intspec = of_get_property(np, "interrupts", NULL);
-	if (!intspec)
-		panic("no interrupts property for timer");
-
-	mcs814x_timer_irq.irq = be32_to_cpup(intspec);
-}
-
-void __init mcs814x_timer_init(void)
-{
-	struct clk *clk;
-
-	arch_gettimeoffset = mcs814x_gettimeoffset;
-
-	clk = clk_get_sys("timer0", NULL);
-	if (IS_ERR_OR_NULL(clk))
-		panic("unable to get timer0 clock");
-
-	clock_rate = clk_get_rate(clk);
-
-	mcs814x_of_timer_init();
-
-	pr_info("Timer frequency: %d (kHz)\n", clock_rate / 1000);
-
-	timer_reload_value = 0xffffffff - (clock_rate / HZ);
-
-	/* disable timer */
-	writel_relaxed(~TIMER_CTL_EN, mcs814x_timer_base + TIMER_CTL);
-	writel_relaxed(timer_reload_value, mcs814x_timer_base + TIMER_VAL);
-	last_reload = timer_reload_value;
-
-	setup_irq(mcs814x_timer_irq.irq, &mcs814x_timer_irq);
-	/* enable timer, stop timer in debug mode */
-	writel_relaxed(TIMER_CTL_EN | TIMER_CTL_DBG,
-		mcs814x_timer_base + TIMER_CTL);
-}
diff --git a/target/linux/mcs814x/files-3.14/drivers/char/hw_random/mcs814x-rng.c b/target/linux/mcs814x/files-3.14/drivers/char/hw_random/mcs814x-rng.c
deleted file mode 100644
index e347970c51..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/char/hw_random/mcs814x-rng.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * RNG driver for Moschip MCS814x SoC
- *
- * Copyright 2012 (C), Florian Fainelli <florian@openwrt.org>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/hw_random.h>
-#include <linux/io.h>
-#include <linux/of.h>
-
-#define STAT	0x00
-#define RND	0x04
-
-struct mcs814x_rng_priv {
-	void __iomem	*regs;
-};
-
-static int mcs814x_rng_data_read(struct hwrng *rng, u32 *buffer)
-{
-	struct mcs814x_rng_priv *priv = (struct mcs814x_rng_priv *)rng->priv;
-
-	*buffer = readl_relaxed(priv->regs + RND);
-
-	return 4;
-}
-
-static int mcs814x_rng_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct mcs814x_rng_priv *priv;
-	struct hwrng *rng;
-	int ret;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	rng = kzalloc(sizeof(*rng), GFP_KERNEL);
-	if (!rng) {
-		ret = -ENOMEM;
-		goto out_priv;
-	}
-
-	platform_set_drvdata(pdev, rng);
-	rng->priv = (unsigned long)priv;
-	rng->name = pdev->name;
-	rng->data_read = mcs814x_rng_data_read;
-
-	priv->regs = devm_request_and_ioremap(&pdev->dev, res);
-	if (!priv->regs) {
-		ret = -ENOMEM;
-		goto out_rng;
-	}
-
-	ret = hwrng_register(rng);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register hwrng driver\n");
-		goto out;
-	}
-
-	dev_info(&pdev->dev, "registered\n");
-
-	return ret;
-
-out_rng:
-	platform_set_drvdata(pdev, NULL);
-	kfree(rng);
-out_priv:
-	kfree(priv);
-out:
-	return ret;
-}
-
-static int mcs814x_rng_remove(struct platform_device *pdev)
-{
-	struct hwrng *rng = platform_get_drvdata(pdev);
-	struct mcs814x_rng_priv *priv = (struct mcs814x_rng_priv *)rng->priv;
-
-	hwrng_unregister(rng);
-	kfree(priv);
-	kfree(rng);
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-static const struct of_device_id mcs814x_rng_ids[] = {
-	{ .compatible = "moschip,mcs814x-rng", },
-	{ /* sentinel */ },
-};
-
-static struct platform_driver mcs814x_rng_driver = {
-	.driver	= {
-		.name	= "mcs814x-rng",
-		.owner	= THIS_MODULE,
-		.of_match_table = mcs814x_rng_ids,
-	},
-	.probe	= mcs814x_rng_probe,
-	.remove	= mcs814x_rng_remove,
-};
-
-module_platform_driver(mcs814x_rng_driver);
-
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("H/W Random Number Generator (RNG) for Moschip MCS814x");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/mcs814x/files-3.14/drivers/gpio/gpio-mcs814x.c b/target/linux/mcs814x/files-3.14/drivers/gpio/gpio-mcs814x.c
deleted file mode 100644
index 2817e56c6d..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/gpio/gpio-mcs814x.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Moschip MCS814x GPIO support
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under the GPLv2
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-struct mcs814x_gpio_chip {
-	void __iomem *regs;
-	struct gpio_chip chip;
-};
-
-#define GPIO_PIN	0x00
-#define GPIO_DIR	0x04
-
-#define to_mcs814x_gpio_chip(x)	container_of(x, struct mcs814x_gpio_chip, chip)
-
-static int mcs814x_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
-
-	return readl_relaxed(mcs814x->regs + GPIO_PIN) & (1 << offset);
-}
-
-static void mcs814x_gpio_set(struct gpio_chip *chip,
-				unsigned offset, int value)
-{
-	struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
-	u32 mask;
-
-	mask = readl_relaxed(mcs814x->regs + GPIO_PIN);
-	if (value)
-		mask |= (1 << offset);
-	else
-		mask &= ~(1 << offset);
-	writel_relaxed(mask, mcs814x->regs + GPIO_PIN);
-}
-
-static int mcs814x_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
-	u32 mask;
-
-	mask = readl_relaxed(mcs814x->regs + GPIO_DIR);
-	mask &= ~(1 << offset);
-	writel_relaxed(mask, mcs814x->regs + GPIO_DIR);
-
-	return 0;
-}
-
-static int mcs814x_gpio_direction_input(struct gpio_chip *chip,
-					unsigned offset)
-{
-	struct mcs814x_gpio_chip *mcs814x = to_mcs814x_gpio_chip(chip);
-	u32 mask;
-
-	mask = readl_relaxed(mcs814x->regs + GPIO_DIR);
-	mask |= (1 << offset);
-	writel_relaxed(mask, mcs814x->regs + GPIO_DIR);
-
-	return 0;
-}
-
-static int mcs814x_gpio_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct mcs814x_gpio_chip *mcs814x_chip;
-	int ret;
-	const unsigned int *num_gpios;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	num_gpios = of_get_property(pdev->dev.of_node, "num-gpios", NULL);
-	if (!num_gpios)
-		dev_err(&pdev->dev, "FIXME: no num-gpios property\n");
-
-	mcs814x_chip = kzalloc(sizeof(*mcs814x_chip), GFP_KERNEL);
-	if (!mcs814x_chip)
-		return -ENOMEM;
-
-	mcs814x_chip->regs = devm_request_and_ioremap(&pdev->dev, res);
-	if (!mcs814x_chip->regs) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	platform_set_drvdata(pdev, mcs814x_chip);
-
-#ifdef CONFIG_OF_GPIO
-	mcs814x_chip->chip.of_node = pdev->dev.of_node;
-#endif
-
-	mcs814x_chip->chip.label = pdev->name;
-	mcs814x_chip->chip.get = mcs814x_gpio_get;
-	mcs814x_chip->chip.set = mcs814x_gpio_set;
-	mcs814x_chip->chip.direction_input = mcs814x_gpio_direction_input;
-	mcs814x_chip->chip.direction_output = mcs814x_gpio_direction_output;
-	mcs814x_chip->chip.ngpio = be32_to_cpup(num_gpios);
-	/* we want dynamic base allocation */
-	mcs814x_chip->chip.base = -1;
-
-	ret = gpiochip_add(&mcs814x_chip->chip);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register gpiochip\n");
-		goto out;
-	}
-
-	return 0;
-
-out:
-	platform_set_drvdata(pdev, NULL);
-	kfree(mcs814x_chip);
-	return ret;
-}
-
-static struct of_device_id mcs814x_gpio_ids[] = {
-	{ .compatible = "moschip,mcs814x-gpio" },
-	{ /* sentinel */ },
-};
-
-static struct platform_driver mcs814x_gpio_driver = {
-	.driver	= {
-		.name	= "mcs814x-gpio",
-		.owner	= THIS_MODULE,
-		.of_match_table = mcs814x_gpio_ids,
-	},
-	.probe	= mcs814x_gpio_probe,
-};
-
-int __init mcs814x_gpio_init(void)
-{
-	return platform_driver_register(&mcs814x_gpio_driver);
-}
-postcore_initcall(mcs814x_gpio_init);
diff --git a/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/Kconfig b/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/Kconfig
deleted file mode 100644
index 8fa38a4091..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-config  NUPORT_ETHERNET_DRIVER
-	tristate "MCS8140 Ethernet driver"
-	depends on ETHERNET && ARCH_MCS814X
-          help
diff --git a/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/Makefile b/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/Makefile
deleted file mode 100644
index 9719c51b7f..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_NUPORT_ETHERNET_DRIVER)   += mcs8140.o
-
-mcs8140-objs  := nuport_mac.o 
diff --git a/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/nuport_mac.c b/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/nuport_mac.c
deleted file mode 100644
index ae6ce45776..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/net/ethernet/mcs8140/nuport_mac.c
+++ /dev/null
@@ -1,1206 +0,0 @@
-/*
- * Moschip MCS8140 Ethernet MAC driver
- *
- * Copyright (C) 2003, Moschip Semiconductors
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * Licensed under GPLv2
- */
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_mdio.h>
-#include <linux/of_net.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/unaligned.h>
-#include <asm/sizes.h>
-
-/* Hardware registers */
-#define MAC_BASE_ADDR		((priv->mac_base))
-
-#define CTRL_REG		(MAC_BASE_ADDR)
-#define  MII_BUSY		(1 << 0)
-#define  MII_WRITE		(1 << 1)
-#define  RX_ENABLE		(1 << 2)
-#define  TX_ENABLE		(1 << 3)
-#define  DEFER_CHECK		(1 << 5)
-#define  STRIP_PAD		(1 << 8)
-#define  DRTRY_DISABLE		(1 << 10)
-#define  FULL_DUPLEX		(1 << 20)
-#define  HBD_DISABLE		(1 << 28)
-#define MAC_ADDR_HIGH_REG	(MAC_BASE_ADDR + 0x04)
-#define MAC_ADDR_LOW_REG	(MAC_BASE_ADDR + 0x08)
-#define MII_ADDR_REG		(MAC_BASE_ADDR + 0x14)
-#define  MII_ADDR_SHIFT		(11)
-#define  MII_REG_SHIFT		(6)
-#define MII_DATA_REG		(MAC_BASE_ADDR + 0x18)
-/* Link interrupt registers */
-#define LINK_INT_CSR		(MAC_BASE_ADDR + 0xD0)
-#define  LINK_INT_EN		(1 << 0)
-#define  LINK_PHY_ADDR_SHIFT	(1)
-#define  LINK_PHY_REG_SHIFT	(6)
-#define  LINK_BIT_UP_SHIFT	(11)
-#define  LINK_UP		(1 << 16)
-#define LINK_INT_POLL_TIME	(MAC_BASE_ADDR + 0xD4)
-#define  LINK_POLL_MASK		((1 << 20) - 1)
-
-#define DMA_CHAN_WIDTH		32
-#define DMA_RX_CHAN		0
-#define DMA_TX_CHAN		2
-
-/* Receive DMA registers */
-#define RX_DMA_BASE		((priv->dma_base) + \
-				(DMA_CHAN_WIDTH * DMA_RX_CHAN))
-#define RX_BUFFER_ADDR		(RX_DMA_BASE + 0x00)
-#define RX_MAX_BYTES		(RX_DMA_BASE + 0x04)
-#define RX_ACT_BYTES		(RX_DMA_BASE + 0x08)
-#define RX_START_DMA		(RX_DMA_BASE + 0x0C)
-#define  RX_DMA_ENABLE		(1 << 0)
-#define  RX_DMA_RESET		(1 << 1)
-#define  RX_DMA_STATUS_FIFO	(1 << 12)
-#define RX_DMA_ENH		(RX_DMA_BASE + 0x14)
-#define  RX_DMA_INT_ENABLE	(1 << 1)
-
-/* Transmit DMA registers */
-#define TX_DMA_BASE		((priv->dma_base) + \
-				(DMA_CHAN_WIDTH * DMA_TX_CHAN))
-#define TX_BUFFER_ADDR		(TX_DMA_BASE + 0x00)
-#define TX_PKT_BYTES		(TX_DMA_BASE + 0x04)
-#define TX_BYTES_SENT		(TX_DMA_BASE + 0x08)
-#define TX_START_DMA		(TX_DMA_BASE + 0x0C)
-#define  TX_DMA_ENABLE		(1 << 0)
-#define  TX_DMA_START_FRAME	(1 << 2)
-#define  TX_DMA_END_FRAME	(1 << 3)
-#define  TX_DMA_PAD_DISABLE	(1 << 8)
-#define  TX_DMA_CRC_DISABLE	(1 << 9)
-#define  TX_DMA_FIFO_FULL	(1 << 16)
-#define  TX_DMA_FIFO_EMPTY	(1 << 17)
-#define  TX_DMA_STATUS_AVAIL	(1 << 18)
-#define  TX_DMA_RESET		(1 << 24)
-#define TX_DMA_STATUS		(TX_DMA_BASE + 0x10)
-#define TX_DMA_ENH		(TX_DMA_BASE + 0x14)
-#define  TX_DMA_ENH_ENABLE	(1 << 0)
-#define  TX_DMA_INT_FIFO	(1 << 1)
-
-#define RX_ALLOC_SIZE		SZ_2K
-#define MAX_ETH_FRAME_SIZE	1536
-#define RX_SKB_TAILROOM		128
-#define RX_SKB_HEADROOM		(RX_ALLOC_SIZE  - \
-				(MAX_ETH_FRAME_SIZE + RX_SKB_TAILROOM) + 0)
-
-			/* WDT     Late COL    Lenght     COL      Type */
-#define ERROR_FILTER_MASK ((1<<14) | (1<<15) | (1<<16) | (1<<17) | (0<<18) | \
-			/* MII    Dribbling    CRC    Len/type   Control */\
-			(1<<19) | (1<<20) | (1<<21) | (0<<24) | (1<<25) | \
-			/* Unsup   Missed */\
-			(1<<26) | (0<<31))
-#define  TX_RING_SIZE  30
-#define  RX_RING_SIZE  30
-
-static inline u32 nuport_mac_readl(void __iomem *reg)
-{
-	return readl_relaxed(reg);
-}
-
-static inline u8 nuport_mac_readb(void __iomem *reg)
-{
-	return readb_relaxed(reg);
-}
-
-static inline void nuport_mac_writel(u32 value, void __iomem *reg)
-{
-	writel_relaxed(value, reg);
-}
-
-static inline void nuport_mac_writeb(u8 value, void __iomem *reg)
-{
-	writel_relaxed(value, reg);
-}
-
-/* MAC private data */
-struct nuport_mac_priv {
-	spinlock_t lock;
-
-	void __iomem	*mac_base;
-	void __iomem	*dma_base;
-
-	int		rx_irq;
-	int		tx_irq;
-	int		link_irq;
-	struct clk	*emac_clk;
-	struct clk	*ephy_clk;
-
-	/* Transmit buffers */
-	struct sk_buff *tx_skb[TX_RING_SIZE];
-	dma_addr_t tx_addr;
-	unsigned int valid_txskb[TX_RING_SIZE];
-	unsigned int cur_tx;
-	unsigned int dma_tx;
-	unsigned int tx_full;
-
-	/* Receive buffers */
-	struct sk_buff *rx_skb[RX_RING_SIZE];
-	dma_addr_t rx_addr;
-	unsigned int irq_rxskb[RX_RING_SIZE];
-	int pkt_len[RX_RING_SIZE];
-	unsigned int cur_rx;
-	unsigned int dma_rx;
-	unsigned int rx_full;
-
-	unsigned int first_pkt;
-
-	/* Private data */
-	struct napi_struct napi;
-	struct net_device	*dev;
-	struct platform_device	*pdev;
-	struct mii_bus		*mii_bus;
-	struct phy_device	*phydev;
-	struct device_node	*phy_node;
-	phy_interface_t		phy_interface;
-	int			old_link;
-	int			old_duplex;
-	u32			msg_level;
-	unsigned int		buffer_shifting_len;
-};
-
-static inline int nuport_mac_mii_busy_wait(struct nuport_mac_priv *priv)
-{
-	unsigned long curr;
-	unsigned long finish = jiffies + 3 * HZ;
-
-	do {
-		curr = jiffies;
-		if (!(nuport_mac_readl(MII_ADDR_REG) & MII_BUSY))
-			return 0;
-		cpu_relax();
-	} while (!time_after_eq(curr, finish));
-
-	return -EBUSY;
-}
-
-/* Read from PHY registers */
-static int nuport_mac_mii_read(struct mii_bus *bus,
-				int mii_id, int regnum)
-{
-	struct net_device *dev = bus->priv;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	int ret;
-	u32 val = 0;
-
-	ret = nuport_mac_mii_busy_wait(priv);
-	if (ret)
-		return ret;
-
-	val |= (mii_id << MII_ADDR_SHIFT) | (regnum << MII_REG_SHIFT) | MII_BUSY;
-	nuport_mac_writel(val, MII_ADDR_REG);
-	ret = nuport_mac_mii_busy_wait(priv);
-	if (ret)
-		return ret;
-
-	return nuport_mac_readl(MII_DATA_REG);
-}
-
-static int nuport_mac_mii_write(struct mii_bus *bus, int mii_id,
-				int regnum, u16 value)
-{
-	struct net_device *dev = bus->priv;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	int ret;
-	u32 val = 0;
-
-	ret = nuport_mac_mii_busy_wait(priv);
-	if (ret)
-		return ret;
-
-	val |= (mii_id << MII_ADDR_SHIFT) | (regnum << MII_REG_SHIFT);
-	val |= MII_BUSY | MII_WRITE;
-	nuport_mac_writel(value, MII_DATA_REG);
-	nuport_mac_writel(val, MII_ADDR_REG);
-
-	return nuport_mac_mii_busy_wait(priv);
-}
-
-static int nuport_mac_mii_reset(struct mii_bus *bus)
-{
-	return 0;
-}
-
-static int nuport_mac_start_tx_dma(struct nuport_mac_priv *priv,
-					struct sk_buff *skb)
-{
-	u32 reg;
-	unsigned int timeout = 2048;
-
-	while (timeout--) {
-		reg = nuport_mac_readl(TX_START_DMA);
-		if (!(reg & TX_DMA_ENABLE)) {
-			netdev_dbg(priv->dev, "dma ready\n");
-			break;
-		}
-		cpu_relax();
-	}
-
-	if (!timeout)
-		return -EBUSY;
-
-	priv->tx_addr = dma_map_single(&priv->pdev->dev, skb->data,
-			skb->len, DMA_TO_DEVICE);
-	if (dma_mapping_error(&priv->pdev->dev, priv->tx_addr))
-		return -ENOMEM;
-
-	/* enable enhanced mode */
-	nuport_mac_writel(TX_DMA_ENH_ENABLE, TX_DMA_ENH);
-	nuport_mac_writel(priv->tx_addr, TX_BUFFER_ADDR);
-	nuport_mac_writel((skb->len) - 1, TX_PKT_BYTES);
-	wmb();
-	reg = TX_DMA_ENABLE | TX_DMA_START_FRAME | TX_DMA_END_FRAME;
-	nuport_mac_writel(reg, TX_START_DMA);
-
-	return 0;
-}
-
-static void nuport_mac_reset_tx_dma(struct nuport_mac_priv *priv)
-{
-	u32 reg;
-
-	reg = nuport_mac_readl(TX_START_DMA);
-	reg |= TX_DMA_RESET;
-	nuport_mac_writel(reg, TX_START_DMA);
-}
-
-static int nuport_mac_start_rx_dma(struct nuport_mac_priv *priv,
-					struct sk_buff *skb)
-{
-	u32 reg;
-	unsigned int timeout = 2048;
-
-	while (timeout--) {
-		reg = nuport_mac_readl(RX_START_DMA);
-		if (!(reg & RX_DMA_ENABLE)) {
-			netdev_dbg(priv->dev, "dma ready\n");
-			break;
-		}
-		cpu_relax();
-	}
-
-	if (!timeout)
-		return -EBUSY;
-
-	priv->rx_addr = dma_map_single(&priv->pdev->dev, skb->data,
-				RX_ALLOC_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(&priv->pdev->dev, priv->rx_addr))
-		return -ENOMEM;
-
-	nuport_mac_writel(priv->rx_addr, RX_BUFFER_ADDR);
-	wmb();
-	nuport_mac_writel(RX_DMA_ENABLE, RX_START_DMA);
-
-	return 0;
-}
-
-static void nuport_mac_reset_rx_dma(struct nuport_mac_priv *priv)
-{
-	u32 reg;
-
-	reg = nuport_mac_readl(RX_START_DMA);
-	reg |= RX_DMA_RESET;
-	nuport_mac_writel(reg, RX_START_DMA);
-}
-
-/* I suppose this might do something, but I am not sure actually */
-static void nuport_mac_disable_rx_dma(struct nuport_mac_priv *priv)
-{
-	u32 reg;
-
-	reg = nuport_mac_readl(RX_DMA_ENH);
-	reg &= ~RX_DMA_INT_ENABLE;
-	nuport_mac_writel(reg, RX_DMA_ENH);
-}
-
-static void nuport_mac_enable_rx_dma(struct nuport_mac_priv *priv)
-{
-	u32 reg;
-
-	reg = nuport_mac_readl(RX_DMA_ENH);
-	reg |= RX_DMA_INT_ENABLE;
-	nuport_mac_writel(reg, RX_DMA_ENH);
-}
-
-/* Add packets to the transmit queue */
-static int nuport_mac_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	unsigned long flags;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	int ret;
-
-	if (netif_queue_stopped(dev)) {
-		netdev_warn(dev, "netif queue was stopped, restarting\n");
-		netif_start_queue(dev);
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->first_pkt) {
-		ret = nuport_mac_start_tx_dma(priv, skb);
-		if (ret) {
-			netif_stop_queue(dev);
-			spin_unlock_irqrestore(&priv->lock, flags);
-			netdev_err(dev, "transmit path busy\n");
-			return NETDEV_TX_BUSY;
-		}
-		priv->first_pkt = 0;
-	}
-
-	priv->tx_skb[priv->cur_tx] = skb;
-	dev->stats.tx_bytes += skb->len;
-	dev->stats.tx_packets++;
-	priv->valid_txskb[priv->cur_tx] = 1;
-	priv->cur_tx++;
-	dev->trans_start = jiffies;
-
-	if (priv->cur_tx >= TX_RING_SIZE)
-		priv->cur_tx = 0;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (priv->valid_txskb[priv->cur_tx]) {
-		priv->tx_full = 1;
-		netdev_err(dev, "stopping queue\n");
-		netif_stop_queue(dev);
-	}
-
-	return NETDEV_TX_OK;
-}
-
-static void nuport_mac_adjust_link(struct net_device *dev)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	struct phy_device *phydev = priv->phydev;
-	unsigned int status_changed = 0;
-	u32 reg;
-
-	BUG_ON(!phydev);
-
-	if (priv->old_link != phydev->link) {
-		status_changed = 1;
-		priv->old_link = phydev->link;
-	}
-
-	if (phydev->link && (priv->old_duplex != phydev->duplex)) {
-		reg = nuport_mac_readl(CTRL_REG);
-		if (phydev->duplex == DUPLEX_FULL)
-			reg |= DUPLEX_FULL;
-		else
-			reg &= ~DUPLEX_FULL;
-		nuport_mac_writel(reg, CTRL_REG);
-
-		status_changed = 1;
-		priv->old_duplex = phydev->duplex;
-	}
-
-	if (!status_changed)
-		return;
-
-	pr_info("%s: link %s", dev->name, phydev->link ?
-		"UP" : "DOWN");
-	if (phydev->link) {
-		pr_cont(" - %d/%s", phydev->speed,
-		phydev->duplex == DUPLEX_FULL ? "full" : "half");
-	}
-	pr_cont("\n");
-}
-
-static irqreturn_t nuport_mac_link_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	u32 reg;
-	u8 phy_addr;
-	unsigned long flags;
-	irqreturn_t ret = IRQ_HANDLED;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	reg = nuport_mac_readl(LINK_INT_CSR);
-	phy_addr = (reg >> LINK_PHY_ADDR_SHIFT) & (PHY_MAX_ADDR - 1);
-
-	if (phy_addr != priv->phydev->addr) {
-		netdev_err(dev, "spurious PHY irq (phy: %d)\n", phy_addr);
-		ret = IRQ_NONE;
-		goto out;
-	}
-
-	priv->phydev->link = (reg & LINK_UP);
-	nuport_mac_adjust_link(dev);
-
-out:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return ret;
-}
-
-static irqreturn_t nuport_mac_tx_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = (struct net_device *)dev_id;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	struct sk_buff *skb;
-	unsigned long flags;
-	int ret;
-	u32 reg;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	/* clear status word available if ready */
-	reg = nuport_mac_readl(TX_START_DMA);
-	if (reg & TX_DMA_STATUS_AVAIL) {
-		nuport_mac_writel(reg, TX_START_DMA);
-		reg = nuport_mac_readl(TX_DMA_STATUS);
-
-		if (reg & 1)
-			dev->stats.tx_errors++;
-	} else
-		netdev_dbg(dev, "no status word: %08x\n", reg);
-
-	skb = priv->tx_skb[priv->dma_tx];
-	priv->tx_skb[priv->dma_tx] = NULL;
-	priv->valid_txskb[priv->dma_tx] = 0;
-	dma_unmap_single(&priv->pdev->dev, priv->rx_addr, skb->len,
-				DMA_TO_DEVICE);
-	dev_kfree_skb_irq(skb);
-
-	priv->dma_tx++;
-	if (priv->dma_tx >= TX_RING_SIZE)
-		priv->dma_tx = 0;
-
-	if (!priv->valid_txskb[priv->dma_tx])
-		priv->first_pkt = 1;
-	else {
-		ret = nuport_mac_start_tx_dma(priv, priv->tx_skb[priv->dma_tx]);
-		if (ret)
-			netdev_err(dev, "failed to restart TX dma\n");
-	}
-
-	if (priv->tx_full) {
-		netdev_dbg(dev, "restarting transmit queue\n");
-		netif_wake_queue(dev);
-		priv->tx_full = 0;
-	}
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-static unsigned int nuport_mac_has_work(struct nuport_mac_priv *priv)
-{
-	unsigned int i;
-
-	for (i = 0; i < RX_RING_SIZE; i++)
-		if (priv->rx_skb[i])
-			return 1;
-
-	return 0;
-}
-
-static irqreturn_t nuport_mac_rx_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = (struct net_device *)dev_id;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->rx_full) {
-		priv->pkt_len[priv->dma_rx] = nuport_mac_readl(RX_ACT_BYTES) - 4;
-		priv->irq_rxskb[priv->dma_rx] = 0;
-		priv->dma_rx++;
-
-		if (priv->dma_rx >= RX_RING_SIZE)
-			priv->dma_rx = 0;
-	} else
-		priv->rx_full = 0;
-
-	if (priv->irq_rxskb[priv->dma_rx] == 1) {
-		ret = nuport_mac_start_rx_dma(priv, priv->rx_skb[priv->dma_rx]);
-		if (ret)
-			netdev_err(dev, "failed to start rx dma\n");
-	} else {
-		priv->rx_full = 1;
-		netdev_dbg(dev, "RX ring full\n");
-	}
-
-	if (likely(nuport_mac_has_work(priv))) {
-		/* find a way to disable DMA rx irq */
-		nuport_mac_disable_rx_dma(priv);
-		napi_schedule(&priv->napi);
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-/* Process received packets in tasklet */
-static int nuport_mac_rx(struct net_device *dev, int limit)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	struct sk_buff *skb;
-	int len, status;
-	int count = 0;
-
-	while (count < limit && !priv->irq_rxskb[priv->cur_rx]) {
-		skb = priv->rx_skb[priv->cur_rx];
-		len = priv->pkt_len[priv->cur_rx];
-
-		/* Remove 2 bytes added by RX buffer shifting */
-		len = len - priv->buffer_shifting_len;
-		skb->data = skb->data + priv->buffer_shifting_len;
-
-		/* Get packet status */
-		status = get_unaligned((u32 *) (skb->data + len));
-
-		dma_unmap_single(&priv->pdev->dev, priv->rx_addr, skb->len,
-				DMA_FROM_DEVICE);
-
-		/* packet filter failed */
-		if (!(status & (1 << 30))) {
-			dev_kfree_skb_irq(skb);
-			goto exit;
-		}
-
-		/* missed frame */
-		if (status & (1 << 31)) {
-			dev->stats.rx_missed_errors++;
-			dev_kfree_skb_irq(skb);
-			goto exit;
-		}
-
-		/* Not ethernet type */
-		if ((!(status & (1 << 18))) || (status & ERROR_FILTER_MASK))
-			dev->stats.rx_errors++;
-
-		if (len > MAX_ETH_FRAME_SIZE) {
-			dev_kfree_skb_irq(skb);
-			goto exit;
-		} else
-			skb_put(skb, len);
-
-		skb->protocol = eth_type_trans(skb, dev);
-		dev->stats.rx_packets++;
-
-		if (status & (1 << 29))
-			skb->pkt_type = PACKET_OTHERHOST;
-		if (status & (1 << 27))
-			skb->pkt_type = PACKET_MULTICAST;
-		if (status & (1 << 28))
-			skb->pkt_type = PACKET_BROADCAST;
-
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-		/* Pass the received packet to network layer */
-		status = netif_receive_skb(skb);
-		if (status != NET_RX_DROP)
-			dev->stats.rx_bytes += len - 4;	/* Without CRC */
-		else
-			dev->stats.rx_dropped++;
-
-		dev->last_rx = jiffies;
-
-exit:
-		skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE);
-		if (!skb)
-			goto out;
-
-		skb_reserve(skb, RX_SKB_HEADROOM);
-		priv->rx_skb[priv->cur_rx] = skb;
-		priv->irq_rxskb[priv->cur_rx] = 1;
-		priv->cur_rx++;
-
-		if (priv->cur_rx >= RX_RING_SIZE)
-			priv->cur_rx = 0;
-		count++;
-	}
-out:
-	return count;
-}
-
-static int nuport_mac_poll(struct napi_struct *napi, int budget)
-{
-	struct nuport_mac_priv *priv =
-		container_of(napi, struct nuport_mac_priv, napi);
-	struct net_device *dev = priv->dev;
-	int work_done;
-
-	work_done = nuport_mac_rx(dev, budget);
-
-	if (work_done < budget) {
-		napi_complete(napi);
-		nuport_mac_enable_rx_dma(priv);
-	}
-
-	return work_done;
-}
-
-static void nuport_mac_init_tx_ring(struct nuport_mac_priv *priv)
-{
-	int i;
-
-	priv->cur_tx = priv->dma_tx = priv->tx_full = 0;
-	for (i = 0; i < TX_RING_SIZE; i++) {
-		priv->tx_skb[i] = NULL;
-		priv->valid_txskb[i] = 0;
-	}
-	priv->first_pkt = 1;
-}
-
-static int nuport_mac_init_rx_ring(struct net_device *dev)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	struct sk_buff *skb;
-	int i;
-
-	priv->cur_rx = priv->dma_rx = priv->rx_full = 0;
-
-	for (i = 0; i < RX_RING_SIZE; i++) {
-		skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE);
-		if (!skb)
-			return -ENOMEM;
-		skb_reserve(skb, RX_SKB_HEADROOM);
-		priv->rx_skb[i] = skb;
-		priv->irq_rxskb[i] = 1;
-	}
-
-	return 0;
-}
-
-static void nuport_mac_free_rx_ring(struct nuport_mac_priv *priv)
-{
-	int i;
-
-	for (i = 0; i < RX_RING_SIZE; i++) {
-		if (!priv->rx_skb[i])
-			continue;
-
-		dev_kfree_skb(priv->rx_skb[i]);
-		priv->rx_skb[i] = NULL;
-	}
-
-	if (priv->rx_addr)
-		dma_unmap_single(&priv->pdev->dev, priv->rx_addr, RX_ALLOC_SIZE,
-				DMA_TO_DEVICE);
-}
-
-static void nuport_mac_read_mac_address(struct net_device *dev)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	int i;
-
-	for (i = 0; i < 4; i++)
-		dev->dev_addr[i] = nuport_mac_readb(MAC_ADDR_LOW_REG + i);
-	dev->dev_addr[4] = nuport_mac_readb(MAC_ADDR_HIGH_REG);
-	dev->dev_addr[5] = nuport_mac_readb(MAC_ADDR_HIGH_REG + 1);
-
-	if (!is_valid_ether_addr(dev->dev_addr)) {
-		dev_info(&priv->pdev->dev, "using random address\n");
-		random_ether_addr(dev->dev_addr);
-	}
-}
-
-static int nuport_mac_change_mac_address(struct net_device *dev, void *mac_addr)
-{
-	struct sockaddr *addr = mac_addr;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	unsigned long *temp = (unsigned long *)dev->dev_addr;
-	u32 high, low;
-
-	if (netif_running(dev))
-		return -EBUSY;
-
-	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
-
-	spin_lock_irq(&priv->lock);
-
-	nuport_mac_writel(*temp, MAC_ADDR_LOW_REG);
-	temp = (unsigned long *)(dev->dev_addr + 4);
-	nuport_mac_writel(*temp, MAC_ADDR_HIGH_REG);
-
-	low = nuport_mac_readl(MAC_ADDR_LOW_REG);
-	high = nuport_mac_readl(MAC_ADDR_HIGH_REG);
-
-	spin_unlock_irq(&priv->lock);
-
-	return 0;
-}
-
-static int nuport_mac_open(struct net_device *dev)
-{
-	int ret;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	unsigned long flags;
-	u32 reg = 0;
-
-	ret = clk_enable(priv->emac_clk);
-	if (ret) {
-		netdev_err(dev, "failed to enable EMAC clock\n");
-		return ret;
-	}
-
-	/* Set MAC into full duplex mode by default */
-	reg |= RX_ENABLE | TX_ENABLE;
-	reg |= DEFER_CHECK | STRIP_PAD | DRTRY_DISABLE;
-	reg |= FULL_DUPLEX | HBD_DISABLE;
-	nuport_mac_writel(reg, CTRL_REG);
-
-	/* set mac address in hardware in case it was not already */
-	nuport_mac_change_mac_address(dev, dev->dev_addr);
-
-	ret = request_irq(priv->link_irq, &nuport_mac_link_interrupt,
-				0, dev->name, dev);
-	if (ret) {
-		netdev_err(dev, "unable to request link interrupt\n");
-		goto out_emac_clk;
-	}
-
-	ret = request_irq(priv->tx_irq, &nuport_mac_tx_interrupt,
-				0, dev->name, dev);
-	if (ret) {
-		netdev_err(dev, "unable to request rx interrupt\n");
-		goto out_link_irq;
-	}
-
-	/* Enable link interrupt monitoring for our PHY address */
-	reg = LINK_INT_EN | (priv->phydev->addr << LINK_PHY_ADDR_SHIFT);
-	/* MII_BMSR register to be watched */
-	reg |= (1 << LINK_PHY_REG_SHIFT);
-	/* BMSR_STATUS to be watched in particular */
-	reg |= (2 << LINK_BIT_UP_SHIFT);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	nuport_mac_writel(reg, LINK_INT_CSR);
-	nuport_mac_writel(LINK_POLL_MASK, LINK_INT_POLL_TIME);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	phy_start(priv->phydev);
-
-	ret = request_irq(priv->rx_irq, &nuport_mac_rx_interrupt,
-				0, dev->name, dev);
-	if (ret) {
-		netdev_err(dev, "unable to request tx interrupt\n");
-		goto out_tx_irq;
-	}
-
-	netif_start_queue(dev);
-
-	nuport_mac_init_tx_ring(priv);
-
-	ret = nuport_mac_init_rx_ring(dev);
-	if (ret) {
-		netdev_err(dev, "rx ring init failed\n");
-		goto out_rx_skb;
-	}
-
-	nuport_mac_reset_tx_dma(priv);
-	nuport_mac_reset_rx_dma(priv);
-
-	/* Start RX DMA */
-	spin_lock_irqsave(&priv->lock, flags);
-	ret = nuport_mac_start_rx_dma(priv, priv->rx_skb[0]);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	napi_enable(&priv->napi);
-
-	return ret;
-
-out_rx_skb:
-	nuport_mac_free_rx_ring(priv);
-	free_irq(priv->rx_irq, dev);
-out_tx_irq:
-	free_irq(priv->tx_irq, dev);
-out_link_irq:
-	free_irq(priv->link_irq, dev);
-out_emac_clk:
-	clk_disable(priv->emac_clk);
-	return ret;
-}
-
-static int nuport_mac_close(struct net_device *dev)
-{
-	u32 reg;
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-
-	spin_lock_irq(&priv->lock);
-	reg = nuport_mac_readl(CTRL_REG);
-	reg &= ~(RX_ENABLE | TX_ENABLE);
-	nuport_mac_writel(reg, CTRL_REG);
-
-	napi_disable(&priv->napi);
-	netif_stop_queue(dev);
-
-	free_irq(priv->link_irq, dev);
-	/* disable PHY polling */
-	nuport_mac_writel(0, LINK_INT_CSR);
-	nuport_mac_writel(0, LINK_INT_POLL_TIME);
-	phy_stop(priv->phydev);
-
-	free_irq(priv->tx_irq, dev);
-	free_irq(priv->rx_irq, dev);
-	spin_unlock_irq(&priv->lock);
-
-	nuport_mac_free_rx_ring(priv);
-
-	clk_disable(priv->emac_clk);
-
-	return 0;
-}
-
-static void nuport_mac_tx_timeout(struct net_device *dev)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	unsigned int i;
-
-	netdev_warn(dev, "transmit timeout, attempting recovery\n");
-
-	netdev_info(dev, "TX DMA regs\n");
-	for (i = 0; i < DMA_CHAN_WIDTH; i += 4)
-		netdev_info(dev, "[%02x]: 0x%08x\n", i, nuport_mac_readl(TX_DMA_BASE + i));
-	netdev_info(dev, "RX DMA regs\n");
-	for (i = 0; i < DMA_CHAN_WIDTH; i += 4)
-		netdev_info(dev, "[%02x]: 0x%08x\n", i, nuport_mac_readl(RX_DMA_BASE + i));
-
-	nuport_mac_init_tx_ring(priv);
-	nuport_mac_reset_tx_dma(priv);
-
-	netif_wake_queue(dev);
-}
-
-static int nuport_mac_mii_probe(struct net_device *dev)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-	struct phy_device *phydev = NULL;
-	int ret;
-
-	ret = clk_enable(priv->ephy_clk);
-	if (ret) {
-		netdev_err(dev, "unable to enable ePHY clk\n");
-		return ret;
-	}
-
-	phydev = phy_find_first(priv->mii_bus);
-	if (!phydev) {
-		netdev_err(dev, "no PHYs found\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	phydev = of_phy_connect(dev, priv->phy_node,
-			nuport_mac_adjust_link, 0,
-			priv->phy_interface);
-	if (IS_ERR(phydev)) {
-		netdev_err(dev, "could not attach PHY\n");
-		ret = PTR_ERR(phydev);
-		goto out;
-	}
-
-	phydev->supported &= PHY_BASIC_FEATURES;
-	phydev->advertising = phydev->supported;
-	priv->phydev = phydev;
-	priv->old_link = 1;
-	priv->old_duplex = DUPLEX_FULL;
-
-	dev_info(&priv->pdev->dev, "attached PHY driver [%s] "
-		"(mii_bus:phy_addr=%d)\n",
-		phydev->drv->name, phydev->addr);
-
-	return 0;
-
-out:
-	/* disable the Ethernet PHY clock for the moment */
-	clk_disable(priv->ephy_clk);
-
-	return ret;
-}
-
-static void nuport_mac_ethtool_drvinfo(struct net_device *dev,
-					struct ethtool_drvinfo *info)
-{
-	strncpy(info->driver, "nuport-mac", sizeof(info->driver));
-	strncpy(info->version, "0.1", sizeof(info->version));
-	strncpy(info->fw_version, "N/A", sizeof(info->fw_version));
-	strncpy(info->bus_info, "internal", sizeof(info->bus_info));
-	info->n_stats = 0;
-	info->testinfo_len = 0;
-	info->regdump_len = 0;
-	info->eedump_len = 0;
-}
-
-static int nuport_mac_ethtool_get_settings(struct net_device *dev,
-					struct ethtool_cmd *cmd)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-
-	if (priv->phydev)
-		return phy_ethtool_gset(priv->phydev, cmd);
-
-	return -EINVAL;
-}
-
-static int nuport_mac_ethtool_set_settings(struct net_device *dev,
-					struct ethtool_cmd *cmd)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-
-	if (priv->phydev)
-		return phy_ethtool_sset(priv->phydev, cmd);
-
-	return -EINVAL;
-}
-
-static void nuport_mac_set_msglevel(struct net_device *dev, u32 msg_level)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-
-	priv->msg_level = msg_level;
-}
-
-static u32 nuport_mac_get_msglevel(struct net_device *dev)
-{
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-
-	return priv->msg_level;
-}
-
-static const struct ethtool_ops nuport_mac_ethtool_ops = {
-	.get_drvinfo		= nuport_mac_ethtool_drvinfo,
-	.get_link		= ethtool_op_get_link,
-	.get_settings		= nuport_mac_ethtool_get_settings,
-	.set_settings		= nuport_mac_ethtool_set_settings,
-	.set_msglevel		= nuport_mac_set_msglevel,
-	.get_msglevel		= nuport_mac_get_msglevel,
-};
-
-static const struct net_device_ops nuport_mac_ops = {
-	.ndo_open		= nuport_mac_open,
-	.ndo_stop		= nuport_mac_close,
-	.ndo_start_xmit		= nuport_mac_start_xmit,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= nuport_mac_change_mac_address,
-	.ndo_tx_timeout		= nuport_mac_tx_timeout,
-};
-
-static int __init nuport_mac_probe(struct platform_device *pdev)
-{
-	struct net_device *dev;
-	struct nuport_mac_priv *priv = NULL;
-	struct resource *regs, *dma;
-	int ret = 0;
-	int rx_irq, tx_irq, link_irq;
-	int i;
-	const unsigned int *intspec;
-
-	dev = alloc_etherdev(sizeof(struct nuport_mac_priv));
-	if (!dev) {
-		dev_err(&pdev->dev, "no memory for net_device\n");
-		return -ENOMEM;
-	}
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!regs || !dma) {
-		dev_err(&pdev->dev, "failed to get regs resources\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	rx_irq = platform_get_irq(pdev, 0);
-	tx_irq = platform_get_irq(pdev, 1);
-	link_irq = platform_get_irq(pdev, 2);
-	if (rx_irq < 0 || tx_irq < 0 || link_irq < 0) {
-		ret = -ENODEV;
-		goto out;
-	}
-
-	platform_set_drvdata(pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
-	priv = netdev_priv(dev);
-	priv->pdev = pdev;
-	priv->dev = dev;
-	spin_lock_init(&priv->lock);
-
-	intspec = of_get_property(pdev->dev.of_node,
-				"nuport-mac,buffer-shifting", NULL);
-	if (!intspec)
-		priv->buffer_shifting_len = 0;
-	else
-		priv->buffer_shifting_len = 2;
-
-	priv->mac_base = devm_request_and_ioremap(&pdev->dev, regs);
-	if (!priv->mac_base) {
-		dev_err(&pdev->dev, "failed to remap regs\n");
-		ret = -ENOMEM;
-		goto out_platform;
-	}
-
-	priv->dma_base = devm_request_and_ioremap(&pdev->dev, dma);
-	if (!priv->dma_base) {
-		dev_err(&pdev->dev, "failed to remap dma-regs\n");
-		ret = -ENOMEM;
-		goto out_platform;
-	}
-
-	priv->emac_clk = clk_get(&pdev->dev, "emac");
-	if (IS_ERR_OR_NULL(priv->emac_clk)) {
-		dev_err(&pdev->dev, "failed to get emac clk\n");
-		ret = PTR_ERR(priv->emac_clk);
-		goto out_platform;
-	}
-
-	priv->ephy_clk = clk_get(&pdev->dev, "ephy");
-	if (IS_ERR_OR_NULL(priv->ephy_clk)) {
-		dev_err(&pdev->dev, "failed to get ephy clk\n");
-		ret = PTR_ERR(priv->ephy_clk);
-		goto out_platform;
-	}
-
-	priv->link_irq = link_irq;
-	priv->rx_irq = rx_irq;
-	priv->tx_irq = tx_irq;
-	priv->msg_level = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK;
-	dev->netdev_ops = &nuport_mac_ops;
-	dev->ethtool_ops = &nuport_mac_ethtool_ops;
-	dev->watchdog_timeo = HZ;
-	dev->flags = IFF_BROADCAST;	/* Supports Broadcast */
-	dev->tx_queue_len = TX_RING_SIZE / 2;
-
-	netif_napi_add(dev, &priv->napi, nuport_mac_poll, 64);
-
-	priv->phy_node = of_parse_phandle(pdev->dev.of_node, "phy", 0);
-	if (!priv->phy_node) {
-		dev_err(&pdev->dev, "no associated PHY\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	priv->phy_interface = of_get_phy_mode(pdev->dev.of_node);
-	if (priv->phy_interface < 0) {
-		dev_err(&pdev->dev, "invalid PHY mode\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	priv->mii_bus = mdiobus_alloc();
-	if (!priv->mii_bus) {
-		dev_err(&pdev->dev, "mii bus allocation failed\n");
-		goto out;
-	}
-
-	priv->mii_bus->priv = dev;
-	priv->mii_bus->read = nuport_mac_mii_read;
-	priv->mii_bus->write = nuport_mac_mii_write;
-	priv->mii_bus->reset = nuport_mac_mii_reset;
-	priv->mii_bus->name = "nuport-mac-mii";
-	priv->mii_bus->phy_mask = (1 << 0);
-	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
-	priv->mii_bus->irq = kzalloc(PHY_MAX_ADDR * sizeof(int), GFP_KERNEL);
-	if (!priv->mii_bus->irq) {
-		dev_err(&pdev->dev, "failed to allocate mii_bus irqs\n");
-		ret = -ENOMEM;
-		goto out_mdio;
-	}
-
-	/* We support PHY interrupts routed back to the MAC */
-	for (i = 0; i < PHY_MAX_ADDR; i++)
-		priv->mii_bus->irq[i] = PHY_IGNORE_INTERRUPT;
-
-	ret = of_mdiobus_register(priv->mii_bus, pdev->dev.of_node);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register mii_bus\n");
-		goto out_mdio_irq;
-	}
-
-	ret = nuport_mac_mii_probe(dev);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to probe MII bus\n");
-		goto out_mdio_unregister;
-	}
-
-	ret = register_netdev(dev);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register net_device\n");
-		goto out_mdio_probe;
-	}
-
-	/* read existing mac address */
-	nuport_mac_read_mac_address(dev);
-
-	dev_info(&pdev->dev, "registered (MAC: %pM)\n", dev->dev_addr);
-
-	return ret;
-
-out_mdio_probe:
-	phy_disconnect(priv->phydev);
-out_mdio_unregister:
-	mdiobus_unregister(priv->mii_bus);
-out_mdio_irq:
-	kfree(priv->mii_bus->irq);
-out_mdio:
-	mdiobus_free(priv->mii_bus);
-out_platform:
-	platform_set_drvdata(pdev, NULL);
-out:
-	clk_put(priv->ephy_clk);
-	clk_put(priv->emac_clk);
-	free_netdev(dev);
-	platform_set_drvdata(pdev, NULL);
-	return ret;
-}
-
-static int nuport_mac_remove(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct nuport_mac_priv *priv = netdev_priv(dev);
-
-	unregister_netdev(dev);
-	phy_disconnect(priv->phydev);
-	mdiobus_unregister(priv->mii_bus);
-	kfree(priv->mii_bus->irq);
-	mdiobus_free(priv->mii_bus);
-	clk_put(priv->ephy_clk);
-	clk_put(priv->emac_clk);
-	free_netdev(dev);
-
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-static struct of_device_id nuport_eth_ids[] __initdata = {
-	{.compatible = "moschip,nuport-mac",},
-	{ /* sentinel */ },
-};
-
-static struct platform_driver nuport_eth_driver = {
-	.driver = {
-		.name = "nuport-mac",
-		.owner = THIS_MODULE,
-		.of_match_table = nuport_eth_ids,
-	},
-	.probe	= nuport_mac_probe,
-	.remove	= nuport_mac_remove,
-};
-
-module_platform_driver(nuport_eth_driver);
-
-MODULE_AUTHOR("Moschip Semiconductors Ltd.");
-MODULE_DESCRIPTION("Moschip MCS8140 Ethernet MAC driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/mcs814x/files-3.14/drivers/net/phy/mcs814x.c b/target/linux/mcs814x/files-3.14/drivers/net/phy/mcs814x.c
deleted file mode 100644
index e92176e3be..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/net/phy/mcs814x.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Driver for Moschip MCS814x internal PHY
- *
- * Copyright (c) 2012 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/phy.h>
-
-MODULE_DESCRIPTION("Moschip MCS814x PHY driver");
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_LICENSE("GPL");
-
-/* Nothing special about this PHY but its OUI (O) */
-static struct phy_driver mcs8140_driver = {
-	.phy_id		= 0,
-	.name		= "Moschip MCS8140",
-	.phy_id_mask	= 0x02,
-	.features	= PHY_BASIC_FEATURES,
-	.config_aneg	= &genphy_config_aneg,
-	.read_status	= &genphy_read_status,
-	.suspend	= genphy_suspend,
-	.resume		= genphy_resume,
-	.driver		= { .owner = THIS_MODULE,},
-};
-
-static int __init mcs814x_phy_init(void)
-{
-	return phy_driver_register(&mcs8140_driver);
-}
-
-static void __exit mcs814x_phy_exit(void)
-{
-	phy_driver_unregister(&mcs8140_driver);
-}
-
-module_init(mcs814x_phy_init);
-module_exit(mcs814x_phy_exit);
-
-static struct mdio_device_id __maybe_unused mcs814x_phy_tbl[] = {
-	{ 0x0, 0x0ffffff0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(mdio, mcs814x_phy_tbl);
diff --git a/target/linux/mcs814x/files-3.14/drivers/usb/host/ehci-mcs814x.c b/target/linux/mcs814x/files-3.14/drivers/usb/host/ehci-mcs814x.c
deleted file mode 100644
index 23928f2c4b..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/usb/host/ehci-mcs814x.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * MCS814X EHCI Host Controller Driver
- *
- * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#define MCS814X_EHCI_CAPS_OFFSET	0x68
-
-static int mcs814x_ehci_init(struct usb_hcd *hcd)
-{
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	int retval = 0;
-
-	ehci->caps = hcd->regs + MCS814X_EHCI_CAPS_OFFSET;
-	ehci->regs = hcd->regs
-		+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-	ehci_reset(ehci);
-
-	retval = ehci_init(hcd);
-	if (retval) {
-		pr_err("ehci_init failed\n");
-		return retval;
-	}
-
-	return retval;
-}
-
-static const struct hc_driver mcs814x_ehci_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "MCS814X EHCI Host Controller",
-	.hcd_priv_size		= sizeof(struct ehci_hcd),
-	.irq			= ehci_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
-	.reset			= mcs814x_ehci_init,
-	.start			= ehci_run,
-	.stop			= ehci_stop,
-	.shutdown		= ehci_shutdown,
-	.urb_enqueue		= ehci_urb_enqueue,
-	.urb_dequeue		= ehci_urb_dequeue,
-	.endpoint_disable	= ehci_endpoint_disable,
-	.get_frame_number	= ehci_get_frame,
-	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= ehci_hub_control,
-#if defined(CONFIG_PM)
-	.bus_suspend		= ehci_bus_suspend,
-	.bus_resume		= ehci_bus_resume,
-#endif
-	.relinquish_port	= ehci_relinquish_port,
-	.port_handed_over	= ehci_port_handed_over,
-
-	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
-};
-
-static int mcs814x_ehci_probe(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd;
-	const struct hc_driver *driver = &mcs814x_ehci_hc_driver;
-	struct resource *res;
-	int irq;
-	int retval;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(&pdev->dev,
-			"Found HC with no IRQ. Check %s setup!\n",
-			dev_name(&pdev->dev));
-		return -ENODEV;
-	}
-	irq = res->start;
-
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-	pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-
-	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-	if (!hcd) {
-		retval = -ENOMEM;
-		goto fail_create_hcd;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev,
-			"Found HC with no register addr. Check %s setup!\n",
-			dev_name(&pdev->dev));
-		retval = -ENODEV;
-		goto fail_request_resource;
-	}
-	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = resource_size(res);
-
-	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-				driver->description)) {
-		dev_dbg(&pdev->dev, "controller already in use\n");
-		retval = -EBUSY;
-		goto fail_request_resource;
-	}
-
-	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-	if (hcd->regs == NULL) {
-		dev_dbg(&pdev->dev, "error mapping memory\n");
-		retval = -EFAULT;
-		goto fail_ioremap;
-	}
-
-	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-	if (retval)
-		goto fail_add_hcd;
-
-	dev_info(&pdev->dev, "added MCS814X EHCI driver\n");
-
-	return retval;
-
-fail_add_hcd:
-	iounmap(hcd->regs);
-fail_ioremap:
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-fail_request_resource:
-	usb_put_hcd(hcd);
-fail_create_hcd:
-	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
-	return retval;
-}
-
-static int mcs814x_ehci_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	usb_remove_hcd(hcd);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
-
-	return 0;
-}
-
-MODULE_ALIAS("platform:mcs814x-ehci");
-
-static const struct of_device_id mcs814x_ehci_id[] = {
-	{ .compatible = "moschip,mcs814x-ehci" },
-	{ .compatible = "usb-ehci" },
-	{ /* sentinel */ },
-};
-
-static struct platform_driver mcs814x_ehci_driver = {
-	.probe = mcs814x_ehci_probe,
-	.remove = mcs814x_ehci_remove,
-	.driver = {
-		.name = "mcs814x-ehci",
-		.of_match_table = mcs814x_ehci_id,
-	},
-};
diff --git a/target/linux/mcs814x/files-3.14/drivers/usb/host/ohci-mcs814x.c b/target/linux/mcs814x/files-3.14/drivers/usb/host/ohci-mcs814x.c
deleted file mode 100644
index 161176b0e6..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/usb/host/ohci-mcs814x.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- *
- * Bus Glue for Moschip MCS814x.
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *
- * Modified for pxa27x from ohci-lh7a404.c
- *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
- *
- * Modified for mcs814x from ohci-mcs814x.c
- *  by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
- *  Based on an earlier driver by Ray Lehtiniemi
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/device.h>
-#include <linux/signal.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-static int usb_hcd_mcs814x_probe(const struct hc_driver *driver,
-			 struct platform_device *pdev)
-{
-	int retval;
-	struct usb_hcd *hcd;
-
-	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
-		return -ENOMEM;
-	}
-
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-	pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-
-	hcd = usb_create_hcd(driver, &pdev->dev, "mcs814x");
-	if (hcd == NULL)
-		return -ENOMEM;
-
-	hcd->rsrc_start = pdev->resource[0].start;
-	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		usb_put_hcd(hcd);
-		retval = -EBUSY;
-		goto err1;
-	}
-
-	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-	if (hcd->regs == NULL) {
-		pr_debug("ioremap failed");
-		retval = -ENOMEM;
-		goto err2;
-	}
-
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
-	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
-	if (retval == 0)
-		return retval;
-
-	iounmap(hcd->regs);
-err2:
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err1:
-	usb_put_hcd(hcd);
-
-	return retval;
-}
-
-static void usb_hcd_mcs814x_remove(struct usb_hcd *hcd,
-			struct platform_device *pdev)
-{
-	usb_remove_hcd(hcd);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
-}
-
-static int ohci_mcs814x_start(struct usb_hcd *hcd)
-{
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int ret;
-
-	ret = ohci_init(ohci);
-	if (ret < 0)
-		return ret;
-
-	ret = ohci_run(ohci);
-	if (ret < 0) {
-		ohci_err(ohci, "can't start %s", hcd->self.bus_name);
-		ohci_stop(hcd);
-		return ret;
-	}
-
-	return 0;
-}
-
-static struct hc_driver ohci_mcs814x_hc_driver = {
-	.description		= hcd_name,
-	.product_desc		= "MCS814X OHCI",
-	.hcd_priv_size		= sizeof(struct ohci_hcd),
-	.irq			= ohci_irq,
-	.flags			= HCD_USB11 | HCD_MEMORY,
-	.start			= ohci_mcs814x_start,
-	.stop			= ohci_stop,
-	.shutdown		= ohci_shutdown,
-	.urb_enqueue		= ohci_urb_enqueue,
-	.urb_dequeue		= ohci_urb_dequeue,
-	.endpoint_disable	= ohci_endpoint_disable,
-	.get_frame_number	= ohci_get_frame,
-	.hub_status_data	= ohci_hub_status_data,
-	.hub_control		= ohci_hub_control,
-#ifdef CONFIG_PM
-	.bus_suspend		= ohci_bus_suspend,
-	.bus_resume		= ohci_bus_resume,
-#endif
-	.start_port_reset	= ohci_start_port_reset,
-};
-
-extern int usb_disabled(void);
-
-static int ohci_hcd_mcs814x_drv_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = -ENODEV;
-	if (!usb_disabled())
-		ret = usb_hcd_mcs814x_probe(&ohci_mcs814x_hc_driver, pdev);
-
-	return ret;
-}
-
-static int ohci_hcd_mcs814x_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	usb_hcd_mcs814x_remove(hcd, pdev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int ohci_hcd_mcs814x_drv_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
-	if (time_before(jiffies, ohci->next_statechange))
-		msleep(5);
-	ohci->next_statechange = jiffies;
-
-	hcd->state = HC_STATE_SUSPENDED;
-
-	return 0;
-}
-
-static int ohci_hcd_mcs814x_drv_resume(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-	int status;
-
-	if (time_before(jiffies, ohci->next_statechange))
-		msleep(5);
-	ohci->next_statechange = jiffies;
-
-	ohci_finish_controller_resume(hcd);
-	return 0;
-}
-#endif
-
-static const struct of_device_id mcs814x_ohci_id[] = {
-	{ .compatible = "moschip,mcs814x-ohci" },
-	{ .compatible = "ohci-le" },
-	{ /* sentinel */ },
-};
-
-static struct platform_driver ohci_hcd_mcs814x_driver = {
-	.probe		= ohci_hcd_mcs814x_drv_probe,
-	.remove		= ohci_hcd_mcs814x_drv_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
-	.suspend	= ohci_hcd_mcs814x_drv_suspend,
-	.resume		= ohci_hcd_mcs814x_drv_resume,
-#endif
-	.driver		= {
-		.name	= "mcs814x-ohci",
-		.owner	= THIS_MODULE,
-		.of_match_table = mcs814x_ohci_id,
-	},
-};
-
-MODULE_ALIAS("platform:mcs814x-ohci");
diff --git a/target/linux/mcs814x/files-3.14/drivers/watchdog/mcs814x_wdt.c b/target/linux/mcs814x/files-3.14/drivers/watchdog/mcs814x_wdt.c
deleted file mode 100644
index 7bcded505e..0000000000
--- a/target/linux/mcs814x/files-3.14/drivers/watchdog/mcs814x_wdt.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Moschip MCS814x Watchdog driver
- *
- * Copyright (C) 2012, Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/of.h>
-
-#define WDT_COUNT	0x00
-#define WDT_CTRL	0x04
-#define  WDT_CTRL_EN	0x1
-
-/* watchdog frequency */
-#define WDT_MAX_VALUE	(0xffffffff)
-
-struct mcs814x_wdt {
-	void __iomem		*regs;
-	spinlock_t		lock;
-	struct watchdog_device	wdt_dev;
-	struct clk		*clk;
-};
-
-static int mcs814x_wdt_start(struct watchdog_device *dev)
-{
-	struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
-	u32 reg;
-
-	spin_lock(&wdt->lock);
-	reg = readl_relaxed(wdt->regs + WDT_CTRL);
-	reg |= WDT_CTRL_EN;
-	writel_relaxed(reg, wdt->regs + WDT_CTRL);
-	spin_unlock(&wdt->lock);
-
-	return 0;
-}
-
-static int mcs814x_wdt_stop(struct watchdog_device *dev)
-{
-	struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
-	u32 reg;
-
-	spin_lock(&wdt->lock);
-	reg = readl_relaxed(wdt->regs + WDT_CTRL);
-	reg &= ~WDT_CTRL_EN;
-	writel_relaxed(reg, wdt->regs + WDT_CTRL);
-	spin_unlock(&wdt->lock);
-
-	return 0;
-}
-
-static int mcs814x_wdt_set_timeout(struct watchdog_device *dev,
-				unsigned int new_timeout)
-{
-	struct mcs814x_wdt *wdt = watchdog_get_drvdata(dev);
-
-	spin_lock(&wdt->lock);
-	/* watchdog counts upward and rollover (0xfffffff -> 0)
-	 * triggers the reboot
-	 */
-	writel_relaxed(WDT_MAX_VALUE - (new_timeout * clk_get_rate(wdt->clk)),
-		wdt->regs + WDT_COUNT);
-	spin_unlock(&wdt->lock);
-
-	return 0;
-}
-
-static int mcs814x_wdt_ping(struct watchdog_device *dev)
-{
-	/* restart the watchdog */
-	mcs814x_wdt_stop(dev);
-	mcs814x_wdt_set_timeout(dev, dev->timeout);
-	mcs814x_wdt_start(dev);
-
-	return 0;
-}
-
-static const struct watchdog_info mcs814x_wdt_ident = {
-	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT |
-			  WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
-	.identity	= "MCS814x Watchdog",
-};
-
-static struct watchdog_ops mcs814x_wdt_ops = {
-	.owner		= THIS_MODULE,
-	.start		= mcs814x_wdt_start,
-	.stop		= mcs814x_wdt_stop,
-	.set_timeout	= mcs814x_wdt_set_timeout,
-	.ping		= mcs814x_wdt_ping,
-};
-
-static int mcs814x_wdt_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct mcs814x_wdt *wdt;
-	int ret;
-	struct clk *clk;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	clk = clk_get(NULL, "wdt");
-	if (IS_ERR_OR_NULL(clk)) {
-		dev_err(&pdev->dev, "failed to get watchdog clock\n");
-		return PTR_ERR(clk);
-	}
-
-	wdt = kzalloc(sizeof(*wdt), GFP_KERNEL);
-	if (!wdt) {
-		ret = -ENOMEM;
-		goto out_clk;
-	}
-
-	spin_lock_init(&wdt->lock);
-	wdt->clk = clk;
-	wdt->wdt_dev.info = &mcs814x_wdt_ident;
-	wdt->wdt_dev.ops = &mcs814x_wdt_ops;
-	wdt->wdt_dev.min_timeout = 1;
-	/* approximately 10995 secs */
-	wdt->wdt_dev.max_timeout = (WDT_MAX_VALUE / clk_get_rate(clk));
-
-	platform_set_drvdata(pdev, wdt);
-
-	/* only ioremap registers, because the register is shared */
-	wdt->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!wdt->regs) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	watchdog_set_drvdata(&wdt->wdt_dev, wdt);
-
-	ret = watchdog_register_device(&wdt->wdt_dev);
-	if (ret) {
-		dev_err(&pdev->dev, "cannot register watchdog: %d\n", ret);
-		goto out;
-	}
-
-	dev_info(&pdev->dev, "registered\n");
-	return 0;
-
-out:
-	platform_set_drvdata(pdev, NULL);
-	kfree(wdt);
-out_clk:
-	clk_put(clk);
-	return ret;
-}
-
-static int mcs814x_wdt_remove(struct platform_device *pdev)
-{
-	struct mcs814x_wdt *wdt = platform_get_drvdata(pdev);
-
-	clk_put(wdt->clk);
-	watchdog_unregister_device(&wdt->wdt_dev);
-	watchdog_set_drvdata(&wdt->wdt_dev, NULL);
-	kfree(wdt);
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-static const struct of_device_id mcs814x_wdt_ids[] = {
-	{ .compatible = "moschip,mcs814x-wdt", },
-	{ /* sentinel */ },
-};
-
-static struct platform_driver mcs814x_wdt_driver = {
-	.driver	= {
-		.name	= "mcs814x-wdt",
-		.owner	= THIS_MODULE,
-		.of_match_table = mcs814x_wdt_ids,
-	},
-	.probe		= mcs814x_wdt_probe,
-	.remove		= mcs814x_wdt_remove,
-};
-
-module_platform_driver(mcs814x_wdt_driver);
-
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("Moschip MCS814x Watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform:mcs814x-wdt");
diff --git a/target/linux/mcs814x/patches-3.14/001-platform.patch b/target/linux/mcs814x/patches-3.14/001-platform.patch
deleted file mode 100644
index 5ba0318896..0000000000
--- a/target/linux/mcs814x/patches-3.14/001-platform.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-Index: linux-3.14.25/arch/arm/Kconfig
-===================================================================
---- linux-3.14.25.orig/arch/arm/Kconfig
-+++ linux-3.14.25/arch/arm/Kconfig
-@@ -880,6 +880,22 @@ config ARCH_OMAP1
- 	help
- 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
- 
-+config ARCH_MCS814X
-+	bool "Moschip MCS814x"
-+	select FIQ
-+	select GENERIC_IRQ_CHIP
-+	select GENERIC_GPIO
-+	select ARCH_REQUIRE_GPIOLIB
-+	select CLKDEV_LOOKUP
-+	select ARCH_USES_GETTIMEOFFSET
-+	select NEED_MACH_MEMORY_H
-+	select USB_ARCH_HAS_OHCI
-+	select USB_ARCH_HAS_EHCI
-+	select MULTI_IRQ_HANDLER
-+	help
-+	  Support for Moschip MCS814x SoCs (MCS8140).
-+
-+
- endchoice
- 
- menu "Multiple platform selection"
-@@ -1004,6 +1020,8 @@ source "arch/arm/mach-picoxcell/Kconfig"
- source "arch/arm/mach-pxa/Kconfig"
- source "arch/arm/plat-pxa/Kconfig"
- 
-+source "arch/arm/mach-mcs814x/Kconfig"
-+
- source "arch/arm/mach-mmp/Kconfig"
- 
- source "arch/arm/mach-realview/Kconfig"
-Index: linux-3.14.25/arch/arm/Makefile
-===================================================================
---- linux-3.14.25.orig/arch/arm/Makefile
-+++ linux-3.14.25/arch/arm/Makefile
-@@ -170,6 +170,7 @@ machine-$(CONFIG_ARCH_KEYSTONE)		+= keys
- machine-$(CONFIG_ARCH_KIRKWOOD)		+= kirkwood
- machine-$(CONFIG_ARCH_KS8695)		+= ks8695
- machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
-+machine-$(CONFIG_ARCH_MCS814X)		+= mcs814x
- machine-$(CONFIG_ARCH_MMP)		+= mmp
- machine-$(CONFIG_ARCH_MOXART)		+= moxart
- machine-$(CONFIG_ARCH_MSM)		+= msm
-Index: linux-3.14.25/arch/arm/boot/dts/Makefile
-===================================================================
---- linux-3.14.25.orig/arch/arm/boot/dts/Makefile
-+++ linux-3.14.25/arch/arm/boot/dts/Makefile
-@@ -118,6 +118,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
- 	kirkwood-ts219-6281.dtb \
- 	kirkwood-ts219-6282.dtb
- dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-+dtb-$(CONFIG_ARCH_MCS814X) += dlan-usb-extender.dtb \
-+	rbt-832.dtb
- dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
- dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
- 	qcom-msm8960-cdp.dtb \
diff --git a/target/linux/mcs814x/patches-3.14/003-ethernet.patch b/target/linux/mcs814x/patches-3.14/003-ethernet.patch
deleted file mode 100644
index 21598cbcca..0000000000
--- a/target/linux/mcs814x/patches-3.14/003-ethernet.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -167,4 +167,6 @@ source "drivers/net/ethernet/wiznet/Kcon
- source "drivers/net/ethernet/xilinx/Kconfig"
- source "drivers/net/ethernet/xircom/Kconfig"
- 
-+source "drivers/net/ethernet/mcs8140/Kconfig"
-+
- endif # ETHERNET
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -77,3 +77,4 @@ obj-$(CONFIG_NET_VENDOR_VIA) += via/
- obj-$(CONFIG_NET_VENDOR_WIZNET) += wiznet/
- obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
- obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
-+obj-$(CONFIG_NUPORT_ETHERNET_DRIVER) += mcs8140/
diff --git a/target/linux/mcs814x/patches-3.14/004-usb.patch b/target/linux/mcs814x/patches-3.14/004-usb.patch
deleted file mode 100644
index 5315cc95da..0000000000
--- a/target/linux/mcs814x/patches-3.14/004-usb.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1298,6 +1298,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
- #endif
- 
-+#ifdef CONFIG_ARCH_MCS814X
-+#include "ehci-mcs814x.c"
-+#define PLATFORM_DRIVER		mcs814x_ehci_driver
-+#endif
-+
- static int __init ehci_hcd_init(void)
- {
- 	int retval = 0;
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1218,6 +1218,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER		ohci_hcd_tilegx_driver
- #endif
- 
-+#ifdef CONFIG_ARCH_MCS814X
-+#include "ohci-mcs814x.c"
-+#define PLATFORM_DRIVER		ohci_hcd_mcs814x_driver
-+#endif
-+
- static int __init ohci_hcd_mod_init(void)
- {
- 	int retval = 0;
diff --git a/target/linux/mcs814x/patches-3.14/005-mcs814x_rng.patch b/target/linux/mcs814x/patches-3.14/005-mcs814x_rng.patch
deleted file mode 100644
index 06deb0e09a..0000000000
--- a/target/linux/mcs814x/patches-3.14/005-mcs814x_rng.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -227,6 +227,18 @@ config HW_RANDOM_TX4939
- 
- 	  If unsure, say Y.
- 
-+config HW_RANDOM_MCS814X
-+	tristate "Moschip MCS814x Random Number Generator"
-+	depends on HW_RANDOM && ARCH_MCS814X
-+	---help---
-+	  This driver provides kernel-side support for the Random Number
-+	  Generator hardware found on Moschip MCS814x processors.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called mcs814x-rng.
-+
-+	  If unusure, say Y.
-+
- config HW_RANDOM_MXC_RNGA
- 	tristate "Freescale i.MX RNGA Random Number Generator"
- 	depends on HW_RANDOM && ARCH_HAS_RNGA
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += oma
- obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
- obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
- obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
-+obj-$(CONFIG_HW_RANDOM_MCS814X) += mcs814x-rng.o
- obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
- obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
- obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
diff --git a/target/linux/mcs814x/patches-3.14/006-mcs814x_wdt.patch b/target/linux/mcs814x/patches-3.14/006-mcs814x_wdt.patch
deleted file mode 100644
index 41157ea234..0000000000
--- a/target/linux/mcs814x/patches-3.14/006-mcs814x_wdt.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -421,6 +421,12 @@ config SIRFSOC_WATCHDOG
- 	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
- 	  the watchdog triggers the system will be reset.
- 
-+config MCS814X_WATCHDOG
-+	tristate "Moschip MCS814x watchdog"
-+	depends on WATCHDOG_CORE && ARCH_MCS814X
-+	help
-+	  Support for the Moschip MCS814x SoCs on-chip watchdog timer.
-+
- # AVR32 Architecture
- 
- config AT32AP700X_WDT
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt
- obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
- obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
- obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
-+obj-$(CONFIG_MCS814X_WATCHDOG) += mcs814x_wdt.o
- 
- # AVR32 Architecture
- obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/target/linux/mcs814x/patches-3.14/008-mcs814x_gpio.patch b/target/linux/mcs814x/patches-3.14/008-mcs814x_gpio.patch
deleted file mode 100644
index 442ee1c678..0000000000
--- a/target/linux/mcs814x/patches-3.14/008-mcs814x_gpio.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -748,6 +748,12 @@ config GPIO_MC33880
- 	  SPI driver for Freescale MC33880 high-side/low-side switch.
- 	  This provides GPIO interface supporting inputs and outputs.
- 
-+config GPIO_MCS814X
-+	tristate "Moschip MCS814x GPIO support"
-+	depends on ARCH_MCS814X
-+	help
-+	   GPIO driver for Moschip MCS814x SoC gpio controllers.
-+
- config GPIO_74X164
- 	tristate "74x164 serial-in/parallel-out 8-bits shift register"
- 	depends on SPI_MASTER && OF
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_GPIO_MAX732X)	+= gpio-max73
- obj-$(CONFIG_GPIO_MC33880)	+= gpio-mc33880.o
- obj-$(CONFIG_GPIO_MC9S08DZ60)	+= gpio-mc9s08dz60.o
- obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
-+obj-$(CONFIG_GPIO_MCS814X)	+= gpio-mcs814x.o
- obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
- obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o
- obj-$(CONFIG_GPIO_MOXART)	+= gpio-moxart.o
diff --git a/target/linux/mcs814x/patches-3.14/011-mcs814x_internal_phy.patch b/target/linux/mcs814x/patches-3.14/011-mcs814x_internal_phy.patch
deleted file mode 100644
index 9aeaf6e632..0000000000
--- a/target/linux/mcs814x/patches-3.14/011-mcs814x_internal_phy.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -157,6 +157,10 @@ config MICREL_PHY
- 	---help---
- 	  Currently has a driver for the KSZ8041
- 
-+config MCS814X_PHY
-+	tristate "Driver for the Moschip MCS814x internal PHY"
-+	depends on ARCH_MCS814X
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -49,3 +49,4 @@ obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-
- obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
- obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o
- obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
-+obj-$(CONFIG_MCS814X_PHY)	+= mcs814x.o
diff --git a/target/linux/mcs814x/patches-3.14/012-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/mcs814x/patches-3.14/012-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644
index c6e3c37a46..0000000000
--- a/target/linux/mcs814x/patches-3.14/012-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -41,9 +41,9 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
--#define MAX_WORD_RETRIES 3
-+#define MAX_WORD_RETRIES 10
- 
- #define SST49LF004B	        0x0060
- #define SST49LF040B	        0x0050
diff --git a/target/linux/mcs814x/patches-3.14/013-ohci_workarounds.patch b/target/linux/mcs814x/patches-3.14/013-ohci_workarounds.patch
deleted file mode 100644
index 691e7e412a..0000000000
--- a/target/linux/mcs814x/patches-3.14/013-ohci_workarounds.patch
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -114,7 +114,7 @@ struct td {
- 	/* PSW is only for ISO.  Only 1 PSW entry is used, but on
- 	 * big-endian PPC hardware that's the second entry.
- 	 */
--#define MAXPSW	2
-+#define MAXPSW	8
- 	__hc16		hwPSW [MAXPSW];
- 
- 	/* rest are purely for the driver's use */
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -505,6 +505,7 @@ static int ohci_init (struct ohci_hcd *o
- {
- 	int ret;
- 	struct usb_hcd *hcd = ohci_to_hcd(ohci);
-+	u32 hcca_area;
- 
- 	if (distrust_firmware)
- 		ohci->flags |= OHCI_QUIRK_HUB_POWER;
-@@ -558,11 +559,13 @@ static int ohci_init (struct ohci_hcd *o
- 	if (ohci->hcca)
- 		return 0;
- 
--	ohci->hcca = dma_alloc_coherent (hcd->self.controller,
--			sizeof *ohci->hcca, &ohci->hcca_dma, 0);
-+	hcca_area = ohci_readl(ohci, &ohci->regs->hcca);
-+	ohci->hcca = ioremap_nocache(hcca_area, sizeof *ohci->hcca);
- 	if (!ohci->hcca)
- 		return -ENOMEM;
- 
-+	ohci->hcca_dma = hcca_area;
-+
- 	if ((ret = ohci_mem_init (ohci)) < 0)
- 		ohci_stop (hcd);
- 	else {
-@@ -580,6 +583,7 @@ static int ohci_init (struct ohci_hcd *o
-  */
- static int ohci_run (struct ohci_hcd *ohci)
- {
-+	int			i = 0;
- 	u32			mask, val;
- 	int			first = ohci->fminterval == 0;
- 	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
-@@ -630,6 +634,8 @@ static int ohci_run (struct ohci_hcd *oh
- 	msleep(val);
- 
- 	memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
-+	for (i = 0; i < NUM_INTS; i++)
-+		ohci->hcca->int_table[i] = 0;
- 
- 	/* 2msec timelimit here means no irqs/preempt */
- 	spin_lock_irq (&ohci->lock);
-@@ -943,9 +949,6 @@ static void ohci_stop (struct usb_hcd *h
- 	remove_debug_files (ohci);
- 	ohci_mem_cleanup (ohci);
- 	if (ohci->hcca) {
--		dma_free_coherent (hcd->self.controller,
--				sizeof *ohci->hcca,
--				ohci->hcca, ohci->hcca_dma);
- 		ohci->hcca = NULL;
- 		ohci->hcca_dma = 0;
- 	}