diff options
| author | Steffen Weinreich <steve@weinreich.org> | 2017-04-27 23:59:22 +0200 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2017-05-18 14:47:53 +0200 |
| commit | 224e5f5efa22b8a0132522367afd3b22f05d53e1 (patch) | |
| tree | 6d53ab6c220b03aef69a0700ccf6c9d7133d64a7 /target/toolchain | |
| parent | ec987e59c4a4c5bbf65e6e667fb13853270d58ae (diff) | |
| download | upstream-224e5f5efa22b8a0132522367afd3b22f05d53e1.tar.gz upstream-224e5f5efa22b8a0132522367afd3b22f05d53e1.tar.bz2 upstream-224e5f5efa22b8a0132522367afd3b22f05d53e1.zip | |
ar71xx: Add support for Teltonika RUT900
Teltonika RUT900 is a Router with LTE dual SIM, WiFi, 4x Ethernet
ports, I/O, RS232, RS485, GPS.
The device ist based on a Atheros AR9344 rev 3,
Specifications:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM
- 16 MB of FLASH
- Serial Console header on a Card Board edge connector
- 4x 10/100 Mbps Ethernet (3x LAN, 1x WAN)
- 2.4 GHz Wifi
- 2x external, detachable Wifi antennas
- LTE Modem Huawei ME909u-521 (Also other Modem seen)
- 2x LTE antennas
- 1x GPS antenna
- 7x LED, 1x button
- 1x USB Connector
- 1x Serial RS232
- 1x Serial RS485
- 1x MicroSD Card
The GPL sources of the device are available at www.teltonika.lt/gpl/
and are based on OpenWRT Barrier Breaker (14.07)
Running from tftp:
The Router starts into the uboot Webupdater if the Button ist pressed
more than 3 seconds, if no Network cable is attached it starts the
uboot serial console, from there the router loads the firmware image
via tftpboot from 192.168.1.2:firmware.bin (the router has the
192.168.1.1). With bootm the loaded image will be booted.
Signed-off-by: Steffen Weinreich <steve@weinreich.org>
Diffstat (limited to 'target/toolchain')
0 files changed, 0 insertions, 0 deletions