diff options
| author | Rafał Miłecki <rafal@milecki.pl> | 2021-01-14 12:13:49 +0100 |
|---|---|---|
| committer | Rafał Miłecki <rafal@milecki.pl> | 2021-01-14 12:34:20 +0100 |
| commit | 6c90999e2e0dee6e5e0322b89e8e6fb6f76aecc9 (patch) | |
| tree | bf909eecacb6c901e37b8969f1b79c61e16a0b54 /target/linux | |
| parent | fa02225ee656c18b084988246a0ad83fb202c374 (diff) | |
| download | upstream-6c90999e2e0dee6e5e0322b89e8e6fb6f76aecc9.tar.gz upstream-6c90999e2e0dee6e5e0322b89e8e6fb6f76aecc9.tar.bz2 upstream-6c90999e2e0dee6e5e0322b89e8e6fb6f76aecc9.zip | |
bcm4908: backport brcmstb USB PHY driver changes
This includes BCM4908 support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Diffstat (limited to 'target/linux')
24 files changed, 3746 insertions, 0 deletions
diff --git a/target/linux/bcm4908/config-5.4 b/target/linux/bcm4908/config-5.4 index 6998cdcaf0..9991afda15 100644 --- a/target/linux/bcm4908/config-5.4 +++ b/target/linux/bcm4908/config-5.4 @@ -89,6 +89,7 @@ CONFIG_GENERIC_IRQ_SHOW_LEVEL=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_GENERIC_MSI_IRQ_DOMAIN=y CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y CONFIG_GENERIC_SCHED_CLOCK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_STRNCPY_FROM_USER=y @@ -156,6 +157,7 @@ CONFIG_PGTABLE_LEVELS=3 CONFIG_PHYLIB=y CONFIG_PHYLINK=y CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_PHY_BRCM_USB=y CONFIG_PM=y CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y @@ -193,6 +195,7 @@ CONFIG_TIMER_PROBE=y CONFIG_TREE_RCU=y CONFIG_TREE_SRCU=y CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_USB_SUPPORT=y CONFIG_VMAP_STACK=y CONFIG_XPS=y CONFIG_ZONE_DMA32=y diff --git a/target/linux/bcm4908/patches-5.4/083-v5.5-0001-phy-phy-brcm-usb-init-fix-__iomem-annotations.patch b/target/linux/bcm4908/patches-5.4/083-v5.5-0001-phy-phy-brcm-usb-init-fix-__iomem-annotations.patch new file mode 100644 index 0000000000..90f6224386 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/083-v5.5-0001-phy-phy-brcm-usb-init-fix-__iomem-annotations.patch @@ -0,0 +1,286 @@ +From e4b957d3a7c74749e2ccfb3dedb63b81e84b292c Mon Sep 17 00:00:00 2001 +From: Ben Dooks <ben.dooks@codethink.co.uk> +Date: Tue, 15 Oct 2019 17:03:31 +0100 +Subject: [PATCH] phy: phy-brcm-usb-init: fix __iomem annotations + +The register address should have __iomem attributes +so fix this to remove the following sparse warnings: + +drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:710:64: warning: Using plain integer as NULL pointer +drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: expected void [noderef] <asn:2> *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: cast removes address space '<asn:2>' of expression +drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: got void * +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: expected void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: got void [noderef] <asn:2> * +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces) +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: expected void [noderef] <asn:2> *addr +drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: got void *reg +drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: too many warnings + +Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb-init.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.c +@@ -126,8 +126,8 @@ enum { + USB_CTRL_SELECTOR_COUNT, + }; + +-#define USB_CTRL_REG(base, reg) ((void *)base + USB_CTRL_##reg) +-#define USB_XHCI_EC_REG(base, reg) ((void *)base + USB_XHCI_EC_##reg) ++#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) ++#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) + #define USB_CTRL_MASK(reg, field) \ + USB_CTRL_##reg##_##field##_MASK + #define USB_CTRL_MASK_FAMILY(params, reg, field) \ +@@ -416,7 +416,7 @@ void usb_ctrl_unset_family(struct brcm_u + u32 reg_offset, u32 field) + { + u32 mask; +- void *reg; ++ void __iomem *reg; + + mask = params->usb_reg_bits_map[field]; + reg = params->ctrl_regs + reg_offset; +@@ -428,7 +428,7 @@ void usb_ctrl_set_family(struct brcm_usb + u32 reg_offset, u32 field) + { + u32 mask; +- void *reg; ++ void __iomem *reg; + + mask = params->usb_reg_bits_map[field]; + reg = params->ctrl_regs + reg_offset; diff --git a/target/linux/bcm4908/patches-5.4/083-v5.5-0002-phy-phy-brcm-usb-init-fix-use-of-integer-as-pointer.patch b/target/linux/bcm4908/patches-5.4/083-v5.5-0002-phy-phy-brcm-usb-init-fix-use-of-integer-as-pointer.patch new file mode 100644 index 0000000000..9252c35fb9 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/083-v5.5-0002-phy-phy-brcm-usb-init-fix-use-of-integer-as-pointer.patch @@ -0,0 +1,26 @@ +From 1025cb924bd517f3c458f36973582d4c2adedd6a Mon Sep 17 00:00:00 2001 +From: Ben Dooks <ben.dooks@codethink.co.uk> +Date: Tue, 15 Oct 2019 17:03:32 +0100 +Subject: [PATCH] phy: phy-brcm-usb-init: fix use of integer as pointer + +The xhci_ec_base variable is a pointer, so don't compare +it with an integer. + +Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> +Reviewed-by: Andrew Murray <andrew.murray@arm.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb-init.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.c +@@ -707,7 +707,7 @@ static void brcmusb_usb3_otp_fix(struct + void __iomem *xhci_ec_base = params->xhci_ec_regs; + u32 val; + +- if (params->family_id != 0x74371000 || xhci_ec_base == 0) ++ if (params->family_id != 0x74371000 || !xhci_ec_base) + return; + brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); + val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0001-phy-usb-EHCI-DMA-may-lose-a-burst-of-DMA-data-for-72.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0001-phy-usb-EHCI-DMA-may-lose-a-burst-of-DMA-data-for-72.patch new file mode 100644 index 0000000000..ac368d5dd1 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0001-phy-usb-EHCI-DMA-may-lose-a-burst-of-DMA-data-for-72.patch @@ -0,0 +1,61 @@ +From dc9aa43c43668481089c48135707ec3f8f5b2e19 Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:17:59 -0500 +Subject: [PATCH] phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 + family + +When the EHCI controller received a 512 byte USB packet that +had to be broken into 2 256 byte bursts across the SCB bus AND +there was a following 512 byte USB packet, the second burst of +data from the first packet was sometimes being lost. If the +burst size was changed to 128 bytes via the EBR_SCB_SIZE field +in the USB_CTRL_EBRIDGE register we'd see the 4th 128 byte burst +of the first packet being lost. This problem became much worse +if other threads were running that accessed memory, like a memcpy +test. Setting the EBR_SCB_SIZE to 512, which prevents breaking +the EHCI USB packet (max size of 512 bytes) into bursts, fixed +the problem. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb-init.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.c +@@ -42,6 +42,7 @@ + #define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK 0x80000000 /* option */ + #define USB_CTRL_EBRIDGE 0x0c + #define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK 0x00020000 /* option */ ++#define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK 0x00000f80 /* option */ + #define USB_CTRL_OBRIDGE 0x10 + #define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK 0x08000000 + #define USB_CTRL_MDIO 0x14 +@@ -176,6 +177,7 @@ static const struct id_to_type id_to_typ + { 0x33900000, BRCM_FAMILY_3390A0 }, + { 0x72500010, BRCM_FAMILY_7250B0 }, + { 0x72600000, BRCM_FAMILY_7260A0 }, ++ { 0x72550000, BRCM_FAMILY_7260A0 }, + { 0x72680000, BRCM_FAMILY_7271A0 }, + { 0x72710000, BRCM_FAMILY_7271A0 }, + { 0x73640000, BRCM_FAMILY_7364A0 }, +@@ -948,6 +950,17 @@ void brcm_usb_init_eohci(struct brcm_usb + if (params->selected_family == BRCM_FAMILY_7271A0) + /* Enable LS keep alive fix for certain keyboards */ + USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE); ++ ++ if (params->family_id == 0x72550000) { ++ /* ++ * Make the burst size 512 bytes to fix a hardware bug ++ * on the 7255a0. See HW7255-24. ++ */ ++ reg = brcmusb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); ++ reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE); ++ reg |= 0x800; ++ brcmusb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); ++ } + } + + void brcm_usb_init_xhci(struct brcm_usb_init_params *params) diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0002-phy-usb-Get-all-drivers-that-use-USB-clks-using-corr.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0002-phy-usb-Get-all-drivers-that-use-USB-clks-using-corr.patch new file mode 100644 index 0000000000..e269f80cf4 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0002-phy-usb-Get-all-drivers-that-use-USB-clks-using-corr.patch @@ -0,0 +1,102 @@ +From ece5ffd9e15e9c8471e58b581a098032a679d34e Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:00 -0500 +Subject: [PATCH] phy: usb: Get all drivers that use USB clks using correct + enable/disable + +The BRCM USB Phy, ohci, ehci and xhci drivers all use the USB clocks +but not all drivers use the clk_prepare_enable/clk_disable_unprepare +versions to enable/disable the clocks. This change gets all drivers +using the prepare version. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb.c | 28 ++++++++++++++-------------- + 1 file changed, 14 insertions(+), 14 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -74,8 +74,8 @@ static int brcm_usb_phy_init(struct phy + */ + mutex_lock(&priv->mutex); + if (priv->init_count++ == 0) { +- clk_enable(priv->usb_20_clk); +- clk_enable(priv->usb_30_clk); ++ clk_prepare_enable(priv->usb_20_clk); ++ clk_prepare_enable(priv->usb_30_clk); + brcm_usb_init_common(&priv->ini); + } + mutex_unlock(&priv->mutex); +@@ -106,8 +106,8 @@ static int brcm_usb_phy_exit(struct phy + mutex_lock(&priv->mutex); + if (--priv->init_count == 0) { + brcm_usb_uninit_common(&priv->ini); +- clk_disable(priv->usb_20_clk); +- clk_disable(priv->usb_30_clk); ++ clk_disable_unprepare(priv->usb_20_clk); ++ clk_disable_unprepare(priv->usb_30_clk); + } + mutex_unlock(&priv->mutex); + phy->inited = false; +@@ -360,8 +360,8 @@ static int brcm_usb_phy_probe(struct pla + if (priv->has_eohci) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); +- clk_disable(priv->usb_20_clk); +- clk_disable(priv->usb_30_clk); ++ clk_disable_unprepare(priv->usb_20_clk); ++ clk_disable_unprepare(priv->usb_30_clk); + + phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate); + +@@ -381,8 +381,8 @@ static int brcm_usb_phy_suspend(struct d + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + + if (priv->init_count) { +- clk_disable(priv->usb_20_clk); +- clk_disable(priv->usb_30_clk); ++ clk_disable_unprepare(priv->usb_20_clk); ++ clk_disable_unprepare(priv->usb_30_clk); + } + return 0; + } +@@ -391,8 +391,8 @@ static int brcm_usb_phy_resume(struct de + { + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + +- clk_enable(priv->usb_20_clk); +- clk_enable(priv->usb_30_clk); ++ clk_prepare_enable(priv->usb_20_clk); ++ clk_prepare_enable(priv->usb_30_clk); + brcm_usb_init_ipp(&priv->ini); + + /* +@@ -405,13 +405,13 @@ static int brcm_usb_phy_resume(struct de + brcm_usb_init_eohci(&priv->ini); + } else if (priv->has_eohci) { + brcm_usb_uninit_eohci(&priv->ini); +- clk_disable(priv->usb_20_clk); ++ clk_disable_unprepare(priv->usb_20_clk); + } + if (priv->phys[BRCM_USB_PHY_3_0].inited) { + brcm_usb_init_xhci(&priv->ini); + } else if (priv->has_xhci) { + brcm_usb_uninit_xhci(&priv->ini); +- clk_disable(priv->usb_30_clk); ++ clk_disable_unprepare(priv->usb_30_clk); + } + } else { + if (priv->has_xhci) +@@ -419,8 +419,8 @@ static int brcm_usb_phy_resume(struct de + if (priv->has_eohci) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); +- clk_disable(priv->usb_20_clk); +- clk_disable(priv->usb_30_clk); ++ clk_disable_unprepare(priv->usb_20_clk); ++ clk_disable_unprepare(priv->usb_30_clk); + } + + return 0; diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0003-phy-usb-Put-USB-phys-into-IDDQ-on-suspend-to-save-po.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0003-phy-usb-Put-USB-phys-into-IDDQ-on-suspend-to-save-po.patch new file mode 100644 index 0000000000..356e305460 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0003-phy-usb-Put-USB-phys-into-IDDQ-on-suspend-to-save-po.patch @@ -0,0 +1,51 @@ +From 6597af4e4835ec0709638d48f73c11b5c624790f Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:01 -0500 +Subject: [PATCH] phy: usb: Put USB phys into IDDQ on suspend to save power in + S2 mode + +Currently the Phy driver will put the USB phys into the max +power saving mode (IDDQ) when there is no corresponding XHCI, EHCI +or OHCI client (through rmmod, unbind or if the driver is not +builtin). This change will also put the Phys into IDDQ mode +on suspend so that S2 will get the additional power savings. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb-init.c | 2 -- + drivers/phy/broadcom/phy-brcm-usb.c | 11 +++++++++-- + 2 files changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.c +@@ -1002,8 +1002,6 @@ void brcm_usb_uninit_common(struct brcm_ + + void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params) + { +- if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) +- USB_CTRL_UNSET_FAMILY(params, USB_PM, USB20_HC_RESETB); + } + + void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params) +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -381,8 +381,15 @@ static int brcm_usb_phy_suspend(struct d + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + + if (priv->init_count) { +- clk_disable_unprepare(priv->usb_20_clk); +- clk_disable_unprepare(priv->usb_30_clk); ++ if (priv->phys[BRCM_USB_PHY_3_0].inited) ++ brcm_usb_uninit_xhci(&priv->ini); ++ if (priv->phys[BRCM_USB_PHY_2_0].inited) ++ brcm_usb_uninit_eohci(&priv->ini); ++ brcm_usb_uninit_common(&priv->ini); ++ if (priv->phys[BRCM_USB_PHY_3_0].inited) ++ clk_disable_unprepare(priv->usb_30_clk); ++ if (priv->phys[BRCM_USB_PHY_2_0].inited) ++ clk_disable_unprepare(priv->usb_20_clk); + } + return 0; + } diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0004-phy-usb-Add-wake-on-functionality.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0004-phy-usb-Add-wake-on-functionality.patch new file mode 100644 index 0000000000..d52edfef77 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0004-phy-usb-Add-wake-on-functionality.patch @@ -0,0 +1,205 @@ +From f1c0db40a3ade1f1a39e5794d728f2953d817322 Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:02 -0500 +Subject: [PATCH] phy: usb: Add "wake on" functionality + +Add the ability to handle USB wake events from USB devices when +in S2 mode. Typically there is some additional configuration +needed to tell the USB device to generate the wake event when +suspended but this varies with the different USB device classes. +For example, on USB Ethernet dongles, ethtool should be used to +enable the magic packet wake functionality in the dongle. +NOTE: This requires that the "power/wakeup" sysfs entry for +the USB device generating the wakeup be set to "enabled". + +This functionality requires a special hardware sideband path that +will trigger the AON_PM_L2 interrupt needed to wake the system from +S2 even though the USB host controllers are in IDDQ (low power state) +and most USB related clocks are shut off. For the sideband signaling +to work we need to leave the usbx_freerun clock running, but this +clock consumes very little power by design. There's a bug in the +XHCI wake hardware so only EHCI/OHCI wake is currently supported. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb-init.c | 17 +++++++++ + drivers/phy/broadcom/phy-brcm-usb-init.h | 1 + + drivers/phy/broadcom/phy-brcm-usb.c | 48 ++++++++++++++++++++++-- + 3 files changed, 63 insertions(+), 3 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.c +@@ -58,6 +58,8 @@ + #define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 /* option */ + #define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK 0x30000000 /* option */ + #define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK 0x00300000 /* option */ ++#define USB_CTRL_USB_PM_RMTWKUP_EN_MASK 0x00000001 ++#define USB_CTRL_USB_PM_STATUS 0x38 + #define USB_CTRL_USB30_CTL1 0x60 + #define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK 0x00000010 + #define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK 0x00010000 +@@ -855,6 +857,10 @@ void brcm_usb_init_common(struct brcm_us + u32 reg; + void __iomem *ctrl = params->ctrl_regs; + ++ /* Clear any pending wake conditions */ ++ reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); ++ brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); ++ + /* Take USB out of power down */ + if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) { + USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); +@@ -1010,6 +1016,17 @@ void brcm_usb_uninit_xhci(struct brcm_us + USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE); + } + ++void brcm_usb_wake_enable(struct brcm_usb_init_params *params, ++ int enable) ++{ ++ void __iomem *ctrl = params->ctrl_regs; ++ ++ if (enable) ++ USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); ++ else ++ USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); ++} ++ + void brcm_usb_set_family_map(struct brcm_usb_init_params *params) + { + int fam; +--- a/drivers/phy/broadcom/phy-brcm-usb-init.h ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.h +@@ -38,5 +38,6 @@ void brcm_usb_init_xhci(struct brcm_usb_ + void brcm_usb_uninit_common(struct brcm_usb_init_params *ini); + void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini); + void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini); ++void brcm_usb_wake_enable(struct brcm_usb_init_params *params, int enable); + + #endif /* _USB_BRCM_COMMON_INIT_H */ +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -57,11 +57,22 @@ struct brcm_usb_phy_data { + bool has_xhci; + struct clk *usb_20_clk; + struct clk *usb_30_clk; ++ struct clk *suspend_clk; + struct mutex mutex; /* serialize phy init */ + int init_count; ++ int wake_irq; + struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; + }; + ++static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) ++{ ++ struct phy *gphy = dev_id; ++ ++ pm_wakeup_event(&gphy->dev, 0); ++ ++ return IRQ_HANDLED; ++} ++ + static int brcm_usb_phy_init(struct phy *gphy) + { + struct brcm_usb_phy *phy = phy_get_drvdata(gphy); +@@ -76,6 +87,7 @@ static int brcm_usb_phy_init(struct phy + if (priv->init_count++ == 0) { + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); ++ clk_prepare_enable(priv->suspend_clk); + brcm_usb_init_common(&priv->ini); + } + mutex_unlock(&priv->mutex); +@@ -108,6 +120,7 @@ static int brcm_usb_phy_exit(struct phy + brcm_usb_uninit_common(&priv->ini); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); ++ clk_disable_unprepare(priv->suspend_clk); + } + mutex_unlock(&priv->mutex); + phy->inited = false; +@@ -228,11 +241,12 @@ static const struct attribute_group brcm + .attrs = brcm_usb_phy_attrs, + }; + +-static int brcm_usb_phy_dvr_init(struct device *dev, ++static int brcm_usb_phy_dvr_init(struct platform_device *pdev, + struct brcm_usb_phy_data *priv, + struct device_node *dn) + { +- struct phy *gphy; ++ struct device *dev = &pdev->dev; ++ struct phy *gphy = NULL; + int err; + + priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb"); +@@ -275,6 +289,28 @@ static int brcm_usb_phy_dvr_init(struct + if (err) + return err; + } ++ ++ priv->suspend_clk = clk_get(dev, "usb0_freerun"); ++ if (IS_ERR(priv->suspend_clk)) { ++ dev_err(dev, "Suspend Clock not found in Device Tree\n"); ++ priv->suspend_clk = NULL; ++ } ++ ++ priv->wake_irq = platform_get_irq_byname(pdev, "wake"); ++ if (priv->wake_irq < 0) ++ priv->wake_irq = platform_get_irq_byname(pdev, "wakeup"); ++ if (priv->wake_irq >= 0) { ++ err = devm_request_irq(dev, priv->wake_irq, ++ brcm_usb_phy_wake_isr, 0, ++ dev_name(dev), gphy); ++ if (err < 0) ++ return err; ++ device_set_wakeup_capable(dev, 1); ++ } else { ++ dev_info(dev, ++ "Wake interrupt missing, system wake not supported\n"); ++ } ++ + return 0; + } + +@@ -335,7 +371,7 @@ static int brcm_usb_phy_probe(struct pla + if (of_property_read_bool(dn, "brcm,has-eohci")) + priv->has_eohci = true; + +- err = brcm_usb_phy_dvr_init(dev, priv, dn); ++ err = brcm_usb_phy_dvr_init(pdev, priv, dn); + if (err) + return err; + +@@ -386,10 +422,13 @@ static int brcm_usb_phy_suspend(struct d + if (priv->phys[BRCM_USB_PHY_2_0].inited) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); ++ brcm_usb_wake_enable(&priv->ini, true); + if (priv->phys[BRCM_USB_PHY_3_0].inited) + clk_disable_unprepare(priv->usb_30_clk); + if (priv->phys[BRCM_USB_PHY_2_0].inited) + clk_disable_unprepare(priv->usb_20_clk); ++ if (priv->wake_irq >= 0) ++ enable_irq_wake(priv->wake_irq); + } + return 0; + } +@@ -400,6 +439,7 @@ static int brcm_usb_phy_resume(struct de + + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); ++ brcm_usb_wake_enable(&priv->ini, false); + brcm_usb_init_ipp(&priv->ini); + + /* +@@ -407,6 +447,8 @@ static int brcm_usb_phy_resume(struct de + * Uninitialize anything that wasn't previously initialized. + */ + if (priv->init_count) { ++ if (priv->wake_irq >= 0) ++ disable_irq_wake(priv->wake_irq); + brcm_usb_init_common(&priv->ini); + if (priv->phys[BRCM_USB_PHY_2_0].inited) { + brcm_usb_init_eohci(&priv->ini); diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0005-phy-usb-Restructure-in-preparation-for-adding-7216-U.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0005-phy-usb-Restructure-in-preparation-for-adding-7216-U.patch new file mode 100644 index 0000000000..2a63556122 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0005-phy-usb-Restructure-in-preparation-for-adding-7216-U.patch @@ -0,0 +1,611 @@ +From 94583a41047eb9489f576344b8ba9370cf4cbfb7 Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:03 -0500 +Subject: [PATCH] phy: usb: Restructure in preparation for adding 7216 USB + support + +The driver is being restructured in preparation for adding support +for the new Synopsys USB conroller on the 7216. Since all the bugs +and work-arounds in previous STB chips are supposed to be fixed, +most of the code in phy-brcm-usb-init.c is not needed. Instead of +adding more complexity to the already complicated phy-brcm-usb-init.c +module, the driver will be restructured to use a vector table to +dispatch into different C modules for the different controllers. + +There was also some general cleanup done including some ipp setup +code that was incorrect. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb-init.c | 191 ++++++++++------------- + drivers/phy/broadcom/phy-brcm-usb-init.h | 140 +++++++++++++++-- + drivers/phy/broadcom/phy-brcm-usb.c | 6 +- + 3 files changed, 214 insertions(+), 123 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.c +@@ -129,10 +129,6 @@ enum { + USB_CTRL_SELECTOR_COUNT, + }; + +-#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) +-#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) +-#define USB_CTRL_MASK(reg, field) \ +- USB_CTRL_##reg##_##field##_MASK + #define USB_CTRL_MASK_FAMILY(params, reg, field) \ + (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) + +@@ -143,13 +139,6 @@ enum { + usb_ctrl_unset_family(params, USB_CTRL_##reg, \ + USB_CTRL_##reg##_##field##_SELECTOR) + +-#define USB_CTRL_SET(base, reg, field) \ +- usb_ctrl_set(USB_CTRL_REG(base, reg), \ +- USB_CTRL_##reg##_##field##_MASK) +-#define USB_CTRL_UNSET(base, reg, field) \ +- usb_ctrl_unset(USB_CTRL_REG(base, reg), \ +- USB_CTRL_##reg##_##field##_MASK) +- + #define MDIO_USB2 0 + #define MDIO_USB3 BIT(31) + +@@ -405,26 +394,14 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT + }, + }; + +-static inline u32 brcmusb_readl(void __iomem *addr) +-{ +- return readl(addr); +-} +- +-static inline void brcmusb_writel(u32 val, void __iomem *addr) +-{ +- writel(val, addr); +-} +- + static inline + void usb_ctrl_unset_family(struct brcm_usb_init_params *params, + u32 reg_offset, u32 field) + { + u32 mask; +- void __iomem *reg; + + mask = params->usb_reg_bits_map[field]; +- reg = params->ctrl_regs + reg_offset; +- brcmusb_writel(brcmusb_readl(reg) & ~mask, reg); ++ brcm_usb_ctrl_unset(params->ctrl_regs + reg_offset, mask); + }; + + static inline +@@ -432,45 +409,27 @@ void usb_ctrl_set_family(struct brcm_usb + u32 reg_offset, u32 field) + { + u32 mask; +- void __iomem *reg; + + mask = params->usb_reg_bits_map[field]; +- reg = params->ctrl_regs + reg_offset; +- brcmusb_writel(brcmusb_readl(reg) | mask, reg); ++ brcm_usb_ctrl_set(params->ctrl_regs + reg_offset, mask); + }; + +-static inline void usb_ctrl_set(void __iomem *reg, u32 field) +-{ +- u32 value; +- +- value = brcmusb_readl(reg); +- brcmusb_writel(value | field, reg); +-} +- +-static inline void usb_ctrl_unset(void __iomem *reg, u32 field) +-{ +- u32 value; +- +- value = brcmusb_readl(reg); +- brcmusb_writel(value & ~field, reg); +-} +- + static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) + { + u32 data; + + data = (reg << 16) | mode; +- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); ++ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + data |= (1 << 24); +- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); ++ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + data &= ~(1 << 24); + /* wait for the 60MHz parallel to serial shifter */ + usleep_range(10, 20); +- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); ++ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + /* wait for the 60MHz parallel to serial shifter */ + usleep_range(10, 20); + +- return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; ++ return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; + } + + static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, +@@ -479,14 +438,14 @@ static void brcmusb_usb_mdio_write(void + u32 data; + + data = (reg << 16) | val | mode; +- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); ++ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + data |= (1 << 25); +- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); ++ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + data &= ~(1 << 25); + + /* wait for the 60MHz parallel to serial shifter */ + usleep_range(10, 20); +- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); ++ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + /* wait for the 60MHz parallel to serial shifter */ + usleep_range(10, 20); + } +@@ -713,12 +672,12 @@ static void brcmusb_usb3_otp_fix(struct + + if (params->family_id != 0x74371000 || !xhci_ec_base) + return; +- brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); +- val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); ++ brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); ++ val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + + /* set cfg_pick_ss_lock */ + val |= (1 << 27); +- brcmusb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); ++ brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + + /* Reset USB 3.0 PHY for workaround to take effect */ + USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); +@@ -751,7 +710,7 @@ static void brcmusb_xhci_soft_reset(stru + * - default chip/rev. + * NOTE: The minor rev is always ignored. + */ +-static enum brcm_family_type brcmusb_get_family_type( ++static enum brcm_family_type get_family_type( + struct brcm_usb_init_params *params) + { + int last_type = -1; +@@ -779,7 +738,7 @@ static enum brcm_family_type brcmusb_get + return last_type; + } + +-void brcm_usb_init_ipp(struct brcm_usb_init_params *params) ++static void usb_init_ipp(struct brcm_usb_init_params *params) + { + void __iomem *ctrl = params->ctrl_regs; + u32 reg; +@@ -795,7 +754,7 @@ void brcm_usb_init_ipp(struct brcm_usb_i + USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP); + } + +- reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + orig_reg = reg; + if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)) + /* Never use the strap, it's going away. */ +@@ -803,8 +762,8 @@ void brcm_usb_init_ipp(struct brcm_usb_i + SETUP, + STRAP_CC_DRD_MODE_ENABLE_SEL)); + if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)) ++ /* override ipp strap pin (if it exits) */ + if (params->ipp != 2) +- /* override ipp strap pin (if it exits) */ + reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP, + STRAP_IPP_SEL)); + +@@ -812,54 +771,26 @@ void brcm_usb_init_ipp(struct brcm_usb_i + reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); + if (params->ioc) + reg |= USB_CTRL_MASK(SETUP, IOC); +- if (params->ipp == 1 && ((reg & USB_CTRL_MASK(SETUP, IPP)) == 0)) ++ if (params->ipp == 1) + reg |= USB_CTRL_MASK(SETUP, IPP); +- brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + /* + * If we're changing IPP, make sure power is off long enough + * to turn off any connected devices. + */ +- if (reg != orig_reg) ++ if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) + msleep(50); + } + +-int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params) +-{ +- void __iomem *ctrl = params->ctrl_regs; +- u32 reg = 0; +- +- if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { +- reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); +- reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, +- PORT_MODE); +- } +- return reg; +-} +- +-void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params, +- int mode) +-{ +- void __iomem *ctrl = params->ctrl_regs; +- u32 reg; +- +- if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { +- reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); +- reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, +- PORT_MODE); +- reg |= mode; +- brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); +- } +-} +- +-void brcm_usb_init_common(struct brcm_usb_init_params *params) ++static void usb_init_common(struct brcm_usb_init_params *params) + { + u32 reg; + void __iomem *ctrl = params->ctrl_regs; + + /* Clear any pending wake conditions */ +- reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); +- brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); + + /* Take USB out of power down */ + if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) { +@@ -885,7 +816,7 @@ void brcm_usb_init_common(struct brcm_us + /* Block auto PLL suspend by USB2 PHY (Sasi) */ + USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); + +- reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + if (params->selected_family == BRCM_FAMILY_7364A0) + /* Suppress overcurrent indication from USB30 ports for A0 */ + reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE); +@@ -901,16 +832,16 @@ void brcm_usb_init_common(struct brcm_us + reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN); + if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN)) + reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN); +- brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + brcmusb_memc_fix(params); + + if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { +- reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, + PORT_MODE); + reg |= params->mode; +- brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } + if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) { + switch (params->mode) { +@@ -932,7 +863,7 @@ void brcm_usb_init_common(struct brcm_us + } + } + +-void brcm_usb_init_eohci(struct brcm_usb_init_params *params) ++static void usb_init_eohci(struct brcm_usb_init_params *params) + { + u32 reg; + void __iomem *ctrl = params->ctrl_regs; +@@ -948,10 +879,10 @@ void brcm_usb_init_eohci(struct brcm_usb + USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ); + + /* Setup the endian bits */ +- reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + reg &= ~USB_CTRL_SETUP_ENDIAN_BITS; + reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN); +- brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + if (params->selected_family == BRCM_FAMILY_7271A0) + /* Enable LS keep alive fix for certain keyboards */ +@@ -962,14 +893,14 @@ void brcm_usb_init_eohci(struct brcm_usb + * Make the burst size 512 bytes to fix a hardware bug + * on the 7255a0. See HW7255-24. + */ +- reg = brcmusb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); + reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE); + reg |= 0x800; +- brcmusb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); + } + } + +-void brcm_usb_init_xhci(struct brcm_usb_init_params *params) ++static void usb_init_xhci(struct brcm_usb_init_params *params) + { + void __iomem *ctrl = params->ctrl_regs; + +@@ -997,7 +928,7 @@ void brcm_usb_init_xhci(struct brcm_usb_ + brcmusb_usb3_otp_fix(params); + } + +-void brcm_usb_uninit_common(struct brcm_usb_init_params *params) ++static void usb_uninit_common(struct brcm_usb_init_params *params) + { + if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) + USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN); +@@ -1006,17 +937,47 @@ void brcm_usb_uninit_common(struct brcm_ + USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); + } + +-void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params) ++static void usb_uninit_eohci(struct brcm_usb_init_params *params) + { + } + +-void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params) ++static void usb_uninit_xhci(struct brcm_usb_init_params *params) + { + brcmusb_xhci_soft_reset(params, 1); + USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE); + } + +-void brcm_usb_wake_enable(struct brcm_usb_init_params *params, ++static int usb_get_dual_select(struct brcm_usb_init_params *params) ++{ ++ void __iomem *ctrl = params->ctrl_regs; ++ u32 reg = 0; ++ ++ pr_debug("%s\n", __func__); ++ if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, ++ PORT_MODE); ++ } ++ return reg; ++} ++ ++static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) ++{ ++ void __iomem *ctrl = params->ctrl_regs; ++ u32 reg; ++ ++ pr_debug("%s\n", __func__); ++ ++ if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, ++ PORT_MODE); ++ reg |= mode; ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ } ++} ++ ++static void usb_wake_enable(struct brcm_usb_init_params *params, + int enable) + { + void __iomem *ctrl = params->ctrl_regs; +@@ -1027,13 +988,29 @@ void brcm_usb_wake_enable(struct brcm_us + USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); + } + +-void brcm_usb_set_family_map(struct brcm_usb_init_params *params) ++static const struct brcm_usb_init_ops bcm7445_ops = { ++ .init_ipp = usb_init_ipp, ++ .init_common = usb_init_common, ++ .init_eohci = usb_init_eohci, ++ .init_xhci = usb_init_xhci, ++ .uninit_common = usb_uninit_common, ++ .uninit_eohci = usb_uninit_eohci, ++ .uninit_xhci = usb_uninit_xhci, ++ .get_dual_select = usb_get_dual_select, ++ .set_dual_select = usb_set_dual_select, ++ .wake_enable = usb_wake_enable, ++}; ++ ++void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params) + { + int fam; + +- fam = brcmusb_get_family_type(params); ++ pr_debug("%s\n", __func__); ++ ++ fam = get_family_type(params); + params->selected_family = fam; + params->usb_reg_bits_map = + &usb_reg_bits_map_table[fam][0]; + params->family_name = family_names[fam]; ++ params->ops = &bcm7445_ops; + } +--- a/drivers/phy/broadcom/phy-brcm-usb-init.h ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.h +@@ -13,6 +13,33 @@ + + struct brcm_usb_init_params; + ++#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) ++#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) ++#define USB_CTRL_MASK(reg, field) \ ++ USB_CTRL_##reg##_##field##_MASK ++#define USB_CTRL_SET(base, reg, field) \ ++ brcm_usb_ctrl_set(USB_CTRL_REG(base, reg), \ ++ USB_CTRL_##reg##_##field##_MASK) ++#define USB_CTRL_UNSET(base, reg, field) \ ++ brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \ ++ USB_CTRL_##reg##_##field##_MASK) ++ ++struct brcm_usb_init_params; ++ ++struct brcm_usb_init_ops { ++ void (*init_ipp)(struct brcm_usb_init_params *params); ++ void (*init_common)(struct brcm_usb_init_params *params); ++ void (*init_eohci)(struct brcm_usb_init_params *params); ++ void (*init_xhci)(struct brcm_usb_init_params *params); ++ void (*uninit_common)(struct brcm_usb_init_params *params); ++ void (*uninit_eohci)(struct brcm_usb_init_params *params); ++ void (*uninit_xhci)(struct brcm_usb_init_params *params); ++ int (*get_dual_select)(struct brcm_usb_init_params *params); ++ void (*set_dual_select)(struct brcm_usb_init_params *params, int mode); ++ void (*wake_enable)(struct brcm_usb_init_params *params, ++ int enable); ++}; ++ + struct brcm_usb_init_params { + void __iomem *ctrl_regs; + void __iomem *xhci_ec_regs; +@@ -24,20 +51,107 @@ struct brcm_usb_init_params { + int selected_family; + const char *family_name; + const u32 *usb_reg_bits_map; ++ const struct brcm_usb_init_ops *ops; + }; + +-void brcm_usb_set_family_map(struct brcm_usb_init_params *params); +-int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params); +-void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params, +- int mode); +- +-void brcm_usb_init_ipp(struct brcm_usb_init_params *ini); +-void brcm_usb_init_common(struct brcm_usb_init_params *ini); +-void brcm_usb_init_eohci(struct brcm_usb_init_params *ini); +-void brcm_usb_init_xhci(struct brcm_usb_init_params *ini); +-void brcm_usb_uninit_common(struct brcm_usb_init_params *ini); +-void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini); +-void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini); +-void brcm_usb_wake_enable(struct brcm_usb_init_params *params, int enable); ++void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); ++ ++static inline u32 brcm_usb_readl(void __iomem *addr) ++{ ++ /* ++ * MIPS endianness is configured by boot strap, which also reverses all ++ * bus endianness (i.e., big-endian CPU + big endian bus ==> native ++ * endian I/O). ++ * ++ * Other architectures (e.g., ARM) either do not support big endian, or ++ * else leave I/O in little endian mode. ++ */ ++ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) ++ return __raw_readl(addr); ++ else ++ return readl_relaxed(addr); ++} ++ ++static inline void brcm_usb_writel(u32 val, void __iomem *addr) ++{ ++ /* See brcmnand_readl() comments */ ++ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) ++ __raw_writel(val, addr); ++ else ++ writel_relaxed(val, addr); ++} ++ ++static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask) ++{ ++ brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg); ++}; ++ ++static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask) ++{ ++ brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg); ++}; ++ ++static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini) ++{ ++ if (ini->ops->init_ipp) ++ ini->ops->init_ipp(ini); ++} ++ ++static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini) ++{ ++ if (ini->ops->init_common) ++ ini->ops->init_common(ini); ++} ++ ++static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini) ++{ ++ if (ini->ops->init_eohci) ++ ini->ops->init_eohci(ini); ++} ++ ++static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini) ++{ ++ if (ini->ops->init_xhci) ++ ini->ops->init_xhci(ini); ++} ++ ++static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini) ++{ ++ if (ini->ops->uninit_common) ++ ini->ops->uninit_common(ini); ++} ++ ++static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini) ++{ ++ if (ini->ops->uninit_eohci) ++ ini->ops->uninit_eohci(ini); ++} ++ ++static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini) ++{ ++ if (ini->ops->uninit_xhci) ++ ini->ops->uninit_xhci(ini); ++} ++ ++static inline void brcm_usb_wake_enable(struct brcm_usb_init_params *ini, ++ int enable) ++{ ++ if (ini->ops->wake_enable) ++ ini->ops->wake_enable(ini, enable); ++} ++ ++static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini) ++{ ++ if (ini->ops->get_dual_select) ++ return ini->ops->get_dual_select(ini); ++ return 0; ++} ++ ++static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini, ++ int mode) ++{ ++ if (ini->ops->set_dual_select) ++ ini->ops->set_dual_select(ini, mode); ++} + + #endif /* _USB_BRCM_COMMON_INIT_H */ +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -207,7 +207,7 @@ static ssize_t dual_select_store(struct + res = name_to_value(&brcm_dual_mode_to_name[0], + ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value); + if (!res) { +- brcm_usb_init_set_dual_select(&priv->ini, value); ++ brcm_usb_set_dual_select(&priv->ini, value); + res = len; + } + mutex_unlock(&sysfs_lock); +@@ -222,7 +222,7 @@ static ssize_t dual_select_show(struct d + int value; + + mutex_lock(&sysfs_lock); +- value = brcm_usb_init_get_dual_select(&priv->ini); ++ value = brcm_usb_get_dual_select(&priv->ini); + mutex_unlock(&sysfs_lock); + return sprintf(buf, "%s\n", + value_to_name(&brcm_dual_mode_to_name[0], +@@ -331,7 +331,7 @@ static int brcm_usb_phy_probe(struct pla + + priv->ini.family_id = brcmstb_get_family_id(); + priv->ini.product_id = brcmstb_get_product_id(); +- brcm_usb_set_family_map(&priv->ini); ++ brcm_usb_dvr_init_7445(&priv->ini); + dev_dbg(dev, "Best mapping table is for %s\n", + priv->ini.family_name); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch new file mode 100644 index 0000000000..2a57d1dc80 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0006-dt-bindings-Add-Broadcom-STB-USB-PHY-binding-documen.patch @@ -0,0 +1,108 @@ +From b11df0c9efbbe2b52c5133ca15030f01b43ec6ef Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:04 -0500 +Subject: [PATCH] dt-bindings: Add Broadcom STB USB PHY binding document + +Add support for bcm7216 and bcm7211 + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Rob Herring <robh@kernel.org> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + .../bindings/phy/brcm,brcmstb-usb-phy.txt | 69 +++++++++++++++---- + 1 file changed, 56 insertions(+), 13 deletions(-) + +--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt ++++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt +@@ -1,30 +1,49 @@ + Broadcom STB USB PHY + + Required properties: +- - compatible: brcm,brcmstb-usb-phy +- - reg: two offset and length pairs. +- The first pair specifies a manditory set of memory mapped +- registers used for general control of the PHY. +- The second pair specifies optional registers used by some of +- the SoCs that support USB 3.x +- - #phy-cells: Shall be 1 as it expects one argument for setting +- the type of the PHY. Possible values are: +- - PHY_TYPE_USB2 for USB1.1/2.0 PHY +- - PHY_TYPE_USB3 for USB3.x PHY ++- compatible: should be one of ++ "brcm,brcmstb-usb-phy" ++ "brcm,bcm7216-usb-phy" ++ "brcm,bcm7211-usb-phy" ++ ++- reg and reg-names properties requirements are specific to the ++ compatible string. ++ "brcm,brcmstb-usb-phy": ++ - reg: 1 or 2 offset and length pairs. One for the base CTRL registers ++ and an optional pair for systems with USB 3.x support ++ - reg-names: not specified ++ "brcm,bcm7216-usb-phy": ++ - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL ++ registers ++ - reg-names: "ctrl", "xhci_ec", "xhci_gbl" ++ "brcm,bcm7211-usb-phy": ++ - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL, ++ USB_PHY and USB_MDIO registers and an optional pair ++ for the BDC registers ++ - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" ++ ++- #phy-cells: Shall be 1 as it expects one argument for setting ++ the type of the PHY. Possible values are: ++ - PHY_TYPE_USB2 for USB1.1/2.0 PHY ++ - PHY_TYPE_USB3 for USB3.x PHY + + Optional Properties: + - clocks : clock phandles. + - clock-names: String, clock name. ++- interrupts: wakeup interrupt ++- interrupt-names: "wakeup" + - brcm,ipp: Boolean, Invert Port Power. + Possible values are: 0 (Don't invert), 1 (Invert) + - brcm,ioc: Boolean, Invert Over Current detection. + Possible values are: 0 (Don't invert), 1 (Invert) +-NOTE: one or both of the following two properties must be set +-- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +-- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. + - dr_mode: String, PHY Device mode. + Possible values are: "host", "peripheral ", "drd" or "typec-pd" + If this property is not defined, the phy will default to "host" mode. ++- brcm,syscon-piarbctl: phandle to syscon for handling config registers ++NOTE: one or both of the following two properties must be set ++- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. ++- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. ++ + + Example: + +@@ -41,3 +60,27 @@ usbphy_0: usb-phy@f0470200 { + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; + }; ++ ++usb-phy@29f0200 { ++ reg = <0x29f0200 0x200>, ++ <0x29c0880 0x30>, ++ <0x29cc100 0x534>, ++ <0x2808000 0x24>, ++ <0x2980080 0x8>; ++ reg-names = "ctrl", ++ "xhci_ec", ++ "xhci_gbl", ++ "usb_phy", ++ "usb_mdio"; ++ brcm,ioc = <0x0>; ++ brcm,ipp = <0x0>; ++ compatible = "brcm,bcm7211-usb-phy"; ++ interrupts = <0x30>; ++ interrupt-parent = <&vpu_intr1_nosec_intc>; ++ interrupt-names = "wake"; ++ #phy-cells = <0x1>; ++ brcm,has-xhci; ++ syscon-piarbctl = <&syscon_piarbctl>; ++ clocks = <&scmi_clk 256>; ++ clock-names = "sw_usb"; ++}; diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0007-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0007-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch new file mode 100644 index 0000000000..11cc080c23 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0007-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch @@ -0,0 +1,358 @@ +From 4e5b9c9a73b32d28759225a40d30848393a8f1fd Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:05 -0500 +Subject: [PATCH] phy: usb: Add support for new Synopsys USB controller on the + 7216 + +The 7216 has the new USB XHCI controller from Synopsys. While +this new controller and the PHY are similar to the STB versions, +the major differences are: + +- Many of the registers and fields in the CTRL block have been + removed or changed. +- A new set of Synopsys control registers, BCHP_USB_XHCI_GBL, were + added. +- MDIO functionality has been replaced with direct access registers + in the BCHP_USB_XHCI_GBL block. +- Power up PHY defaults that had to be changed by MDIO in previous + chips will now power up with the correct defaults. + +A new init module was created for this new Synopsys USB controller. +A new compatible string was added and the driver will dispatch +into one of two init modules based on it. A "reg-names" field was +added so the driver can more easily get optional registers. +A DT bindings document was also added for this driver. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/Makefile | 2 +- + .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 171 ++++++++++++++++++ + drivers/phy/broadcom/phy-brcm-usb-init.h | 2 + + drivers/phy/broadcom/phy-brcm-usb.c | 70 +++++-- + 4 files changed, 227 insertions(+), 18 deletions(-) + create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c + +--- a/drivers/phy/broadcom/Makefile ++++ b/drivers/phy/broadcom/Makefile +@@ -8,7 +8,7 @@ obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bc + obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o + obj-$(CONFIG_PHY_BRCM_USB) += phy-brcm-usb-dvr.o + +-phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o ++phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o phy-brcm-usb-init-synopsys.o + + obj-$(CONFIG_PHY_BCM_SR_PCIE) += phy-bcm-sr-pcie.o + obj-$(CONFIG_PHY_BCM_SR_USB) += phy-bcm-sr-usb.o +--- /dev/null ++++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +@@ -0,0 +1,171 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* Copyright (c) 2018, Broadcom */ ++ ++/* ++ * This module contains USB PHY initialization for power up and S3 resume ++ * for newer Synopsys based USB hardware first used on the bcm7216. ++ */ ++ ++#include <linux/delay.h> ++#include <linux/io.h> ++ ++#include <linux/soc/brcmstb/brcmstb.h> ++#include "phy-brcm-usb-init.h" ++ ++/* Register definitions for the USB CTRL block */ ++#define USB_CTRL_SETUP 0x00 ++#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 ++#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 ++#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 ++#define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200 ++#define USB_CTRL_SETUP_IPP_MASK 0x00000020 ++#define USB_CTRL_SETUP_IOC_MASK 0x00000010 ++#define USB_CTRL_USB_PM 0x04 ++#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000 ++#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 ++#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000 ++#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000 ++#define USB_CTRL_USB_PM_STATUS 0x08 ++#define USB_CTRL_USB_DEVICE_CTL1 0x10 ++#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 ++ ++ ++static void xhci_soft_reset(struct brcm_usb_init_params *params, ++ int on_off) ++{ ++ void __iomem *ctrl = params->ctrl_regs; ++ ++ /* Assert reset */ ++ if (on_off) ++ USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB); ++ /* De-assert reset */ ++ else ++ USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB); ++} ++ ++static void usb_init_ipp(struct brcm_usb_init_params *params) ++{ ++ void __iomem *ctrl = params->ctrl_regs; ++ u32 reg; ++ u32 orig_reg; ++ ++ pr_debug("%s\n", __func__); ++ ++ orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); ++ if (params->ipp != 2) ++ /* override ipp strap pin (if it exits) */ ++ reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL)); ++ ++ /* Override the default OC and PP polarity */ ++ reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); ++ if (params->ioc) ++ reg |= USB_CTRL_MASK(SETUP, IOC); ++ if (params->ipp == 1) ++ reg |= USB_CTRL_MASK(SETUP, IPP); ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); ++ ++ /* ++ * If we're changing IPP, make sure power is off long enough ++ * to turn off any connected devices. ++ */ ++ if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) ++ msleep(50); ++} ++ ++static void usb_init_common(struct brcm_usb_init_params *params) ++{ ++ u32 reg; ++ void __iomem *ctrl = params->ctrl_regs; ++ ++ pr_debug("%s\n", __func__); ++ ++ USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); ++ /* 1 millisecond - for USB clocks to settle down */ ++ usleep_range(1000, 2000); ++ ++ if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) { ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); ++ reg |= params->mode; ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ } ++ switch (params->mode) { ++ case USB_CTLR_MODE_HOST: ++ USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); ++ break; ++ default: ++ USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); ++ USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB); ++ break; ++ } ++} ++ ++static void usb_init_xhci(struct brcm_usb_init_params *params) ++{ ++ pr_debug("%s\n", __func__); ++ ++ xhci_soft_reset(params, 0); ++} ++ ++static void usb_uninit_common(struct brcm_usb_init_params *params) ++{ ++ void __iomem *ctrl = params->ctrl_regs; ++ ++ pr_debug("%s\n", __func__); ++ ++ USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); ++ ++} ++ ++static void usb_uninit_xhci(struct brcm_usb_init_params *params) ++{ ++ ++ pr_debug("%s\n", __func__); ++ ++ xhci_soft_reset(params, 1); ++} ++ ++static int usb_get_dual_select(struct brcm_usb_init_params *params) ++{ ++ void __iomem *ctrl = params->ctrl_regs; ++ u32 reg = 0; ++ ++ pr_debug("%s\n", __func__); ++ ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); ++ return reg; ++} ++ ++static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) ++{ ++ void __iomem *ctrl = params->ctrl_regs; ++ u32 reg; ++ ++ pr_debug("%s\n", __func__); ++ ++ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++ reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); ++ reg |= mode; ++ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); ++} ++ ++ ++static const struct brcm_usb_init_ops bcm7216_ops = { ++ .init_ipp = usb_init_ipp, ++ .init_common = usb_init_common, ++ .init_xhci = usb_init_xhci, ++ .uninit_common = usb_uninit_common, ++ .uninit_xhci = usb_uninit_xhci, ++ .get_dual_select = usb_get_dual_select, ++ .set_dual_select = usb_set_dual_select, ++}; ++ ++void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) ++{ ++ ++ pr_debug("%s\n", __func__); ++ ++ params->family_name = "7216"; ++ params->ops = &bcm7216_ops; ++} +--- a/drivers/phy/broadcom/phy-brcm-usb-init.h ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.h +@@ -43,6 +43,7 @@ struct brcm_usb_init_ops { + struct brcm_usb_init_params { + void __iomem *ctrl_regs; + void __iomem *xhci_ec_regs; ++ void __iomem *xhci_gbl_regs; + int ioc; + int ipp; + int mode; +@@ -55,6 +56,7 @@ struct brcm_usb_init_params { + }; + + void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); ++void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params); + + static inline u32 brcm_usb_readl(void __iomem *addr) + { +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -241,6 +241,15 @@ static const struct attribute_group brcm + .attrs = brcm_usb_phy_attrs, + }; + ++static const struct of_device_id brcm_usb_dt_ids[] = { ++ { ++ .compatible = "brcm,bcm7216-usb-phy", ++ .data = &brcm_usb_dvr_init_7216, ++ }, ++ { .compatible = "brcm,brcmstb-usb-phy" }, ++ { /* sentinel */ } ++}; ++ + static int brcm_usb_phy_dvr_init(struct platform_device *pdev, + struct brcm_usb_phy_data *priv, + struct device_node *dn) +@@ -316,13 +325,16 @@ static int brcm_usb_phy_dvr_init(struct + + static int brcm_usb_phy_probe(struct platform_device *pdev) + { +- struct resource *res; ++ struct resource *res_ctrl; ++ struct resource *res_xhciec = NULL; ++ struct resource *res_xhcigbl = NULL; + struct device *dev = &pdev->dev; + struct brcm_usb_phy_data *priv; + struct phy_provider *phy_provider; + struct device_node *dn = pdev->dev.of_node; + int err; + const char *mode; ++ const struct of_device_id *match; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) +@@ -331,30 +343,59 @@ static int brcm_usb_phy_probe(struct pla + + priv->ini.family_id = brcmstb_get_family_id(); + priv->ini.product_id = brcmstb_get_product_id(); +- brcm_usb_dvr_init_7445(&priv->ini); ++ ++ match = of_match_node(brcm_usb_dt_ids, dev->of_node); ++ if (match && match->data) { ++ void (*dvr_init)(struct brcm_usb_init_params *params); ++ ++ dvr_init = match->data; ++ (*dvr_init)(&priv->ini); ++ } else { ++ brcm_usb_dvr_init_7445(&priv->ini); ++ } ++ + dev_dbg(dev, "Best mapping table is for %s\n", + priv->ini.family_name); +- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (!res) { +- dev_err(dev, "can't get USB_CTRL base address\n"); +- return -EINVAL; ++ ++ /* Newer DT node has reg-names. xhci_ec and xhci_gbl are optional. */ ++ res_ctrl = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); ++ if (res_ctrl != NULL) { ++ res_xhciec = platform_get_resource_byname(pdev, ++ IORESOURCE_MEM, ++ "xhci_ec"); ++ res_xhcigbl = platform_get_resource_byname(pdev, ++ IORESOURCE_MEM, ++ "xhci_gbl"); ++ } else { ++ /* Older DT node without reg-names, use index */ ++ res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (res_ctrl == NULL) { ++ dev_err(dev, "can't get CTRL base address\n"); ++ return -EINVAL; ++ } ++ res_xhciec = platform_get_resource(pdev, IORESOURCE_MEM, 1); + } +- priv->ini.ctrl_regs = devm_ioremap_resource(dev, res); ++ priv->ini.ctrl_regs = devm_ioremap_resource(dev, res_ctrl); + if (IS_ERR(priv->ini.ctrl_regs)) { + dev_err(dev, "can't map CTRL register space\n"); + return -EINVAL; + } +- +- /* The XHCI EC registers are optional */ +- res = platform_get_resource(pdev, IORESOURCE_MEM, 1); +- if (res) { ++ if (res_xhciec) { + priv->ini.xhci_ec_regs = +- devm_ioremap_resource(dev, res); ++ devm_ioremap_resource(dev, res_xhciec); + if (IS_ERR(priv->ini.xhci_ec_regs)) { + dev_err(dev, "can't map XHCI EC register space\n"); + return -EINVAL; + } + } ++ if (res_xhcigbl) { ++ priv->ini.xhci_gbl_regs = ++ devm_ioremap_resource(dev, res_xhcigbl); ++ if (IS_ERR(priv->ini.xhci_gbl_regs)) { ++ dev_err(dev, "can't map XHCI Global register space\n"); ++ return -EINVAL; ++ } ++ } + + of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp); + of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc); +@@ -480,11 +521,6 @@ static const struct dev_pm_ops brcm_usb_ + SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume) + }; + +-static const struct of_device_id brcm_usb_dt_ids[] = { +- { .compatible = "brcm,brcmstb-usb-phy" }, +- { /* sentinel */ } +-}; +- + MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids); + + static struct platform_driver brcm_usb_driver = { diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0008-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0008-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch new file mode 100644 index 0000000000..008108c589 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0008-phy-usb-Add-support-for-new-Synopsys-USB-controller-.patch @@ -0,0 +1,680 @@ +From 9d5f51dcdb646c2ed21649d379fbb703994f1ec9 Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:06 -0500 +Subject: [PATCH] phy: usb: Add support for new Synopsys USB controller on the + 7211b0 + +The 7211b0 has added the STB XHCI Synopsys controller and it +will be used instead of the RPi based DWC USB controller. The new +Synopsys XHCI controller core is the same one that is used on the +7216, but because of the way the STB USB PHY is used on both the A0 +and B0, some of the PHY control is different. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 163 +++++++++++++++++- + drivers/phy/broadcom/phy-brcm-usb-init.c | 31 ++-- + drivers/phy/broadcom/phy-brcm-usb-init.h | 17 +- + drivers/phy/broadcom/phy-brcm-usb.c | 162 +++++++++++------ + 4 files changed, 295 insertions(+), 78 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +@@ -12,10 +12,33 @@ + #include <linux/soc/brcmstb/brcmstb.h> + #include "phy-brcm-usb-init.h" + ++#define PHY_LOCK_TIMEOUT_MS 200 ++ ++/* Register definitions for syscon piarbctl registers */ ++#define PIARBCTL_CAM 0x00 ++#define PIARBCTL_SPLITTER 0x04 ++#define PIARBCTL_MISC 0x08 ++#define PIARBCTL_MISC_SECURE_MASK 0x80000000 ++#define PIARBCTL_MISC_USB_SELECT_MASK 0x40000000 ++#define PIARBCTL_MISC_USB_4G_SDRAM_MASK 0x20000000 ++#define PIARBCTL_MISC_USB_PRIORITY_MASK 0x000f0000 ++#define PIARBCTL_MISC_USB_MEM_PAGE_MASK 0x0000f000 ++#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00 ++#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0 ++#define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f ++#define PIARBCTL_USB_M_ASB_CTRL 0x10 ++ ++#define PIARBCTL_MISC_USB_ONLY_MASK \ ++ (PIARBCTL_MISC_USB_SELECT_MASK | \ ++ PIARBCTL_MISC_USB_4G_SDRAM_MASK | \ ++ PIARBCTL_MISC_USB_PRIORITY_MASK | \ ++ PIARBCTL_MISC_USB_MEM_PAGE_MASK) ++ + /* Register definitions for the USB CTRL block */ + #define USB_CTRL_SETUP 0x00 + #define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 + #define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 ++#define USB_CTRL_SETUP_tca_drv_sel_MASK 0x01000000 + #define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 + #define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200 + #define USB_CTRL_SETUP_IPP_MASK 0x00000020 +@@ -29,11 +52,73 @@ + #define USB_CTRL_USB_DEVICE_CTL1 0x10 + #define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 + ++/* Register definitions for the USB_PHY block in 7211b0 */ ++#define USB_PHY_PLL_LDO_CTL 0x08 ++#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 ++#define USB_PHY_UTMI_CTL_1 0x04 ++#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c ++#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 ++#define USB_PHY_STATUS 0x20 ++#define USB_PHY_STATUS_pll_lock_MASK 0x00000001 ++ ++/* Register definitions for the MDIO registers in the DWC2 block of ++ * the 7211b0. ++ * NOTE: The PHY's MDIO registers are only accessible through the ++ * legacy DesignWare USB controller even though it's not being used. ++ */ ++#define USB_GMDIOCSR 0 ++#define USB_GMDIOGEN 4 ++ ++ ++static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, ++ uint8_t addr, uint16_t data) ++{ ++ void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; ++ ++ addr &= 0x1f; /* 5-bit address */ ++ brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); ++ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) ++ ; ++ brcm_usb_writel(0x59020000 | (addr << 18) | data, ++ usb_mdio + USB_GMDIOGEN); ++ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) ++ ; ++ brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); ++ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) ++ ; ++} ++ ++static uint16_t __maybe_unused usb_mdio_read_7211b0( ++ struct brcm_usb_init_params *params, uint8_t addr) ++{ ++ void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; ++ ++ addr &= 0x1f; /* 5-bit address */ ++ brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); ++ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) ++ ; ++ brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN); ++ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) ++ ; ++ brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); ++ while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) ++ ; ++ return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff; ++} ++ ++static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params) ++{ ++ /* select bank */ ++ usb_mdio_write_7211b0(params, 0x1f, 0x80a0); ++ ++ /* Set the eye */ ++ usb_mdio_write_7211b0(params, 0x0a, 0xc6a0); ++} + + static void xhci_soft_reset(struct brcm_usb_init_params *params, + int on_off) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + /* Assert reset */ + if (on_off) +@@ -45,7 +130,7 @@ static void xhci_soft_reset(struct brcm_ + + static void usb_init_ipp(struct brcm_usb_init_params *params) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + u32 orig_reg; + +@@ -72,10 +157,18 @@ static void usb_init_ipp(struct brcm_usb + msleep(50); + } + ++static void syscon_piarbctl_init(struct regmap *rmap) ++{ ++ /* Switch from legacy USB OTG controller to new STB USB controller */ ++ regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK, ++ PIARBCTL_MISC_USB_SELECT_MASK | ++ PIARBCTL_MISC_USB_4G_SDRAM_MASK); ++} ++ + static void usb_init_common(struct brcm_usb_init_params *params) + { + u32 reg; +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + +@@ -100,6 +193,45 @@ static void usb_init_common(struct brcm_ + } + } + ++static void usb_init_common_7211b0(struct brcm_usb_init_params *params) ++{ ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; ++ void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; ++ int timeout_ms = PHY_LOCK_TIMEOUT_MS; ++ u32 reg; ++ ++ if (params->syscon_piarbctl) ++ syscon_piarbctl_init(params->syscon_piarbctl); ++ ++ /* Init the PHY */ ++ reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_LDO_CTL); ++ reg |= USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK; ++ brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL); ++ ++ /* wait for lock */ ++ while (timeout_ms-- > 0) { ++ reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS); ++ if (reg & USB_PHY_STATUS_pll_lock_MASK) ++ break; ++ usleep_range(1000, 2000); ++ } ++ ++ /* Set the PHY_MODE */ ++ reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); ++ reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK; ++ reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; ++ brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); ++ ++ /* Fix the incorrect default */ ++ reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP); ++ reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK; ++ brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP); ++ ++ usb_init_common(params); ++ ++ usb2_eye_fix_7211b0(params); ++} ++ + static void usb_init_xhci(struct brcm_usb_init_params *params) + { + pr_debug("%s\n", __func__); +@@ -109,7 +241,7 @@ static void usb_init_xhci(struct brcm_us + + static void usb_uninit_common(struct brcm_usb_init_params *params) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + +@@ -127,7 +259,7 @@ static void usb_uninit_xhci(struct brcm_ + + static int usb_get_dual_select(struct brcm_usb_init_params *params) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); +@@ -139,7 +271,7 @@ static int usb_get_dual_select(struct br + + static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); +@@ -161,6 +293,16 @@ static const struct brcm_usb_init_ops bc + .set_dual_select = usb_set_dual_select, + }; + ++static const struct brcm_usb_init_ops bcm7211b0_ops = { ++ .init_ipp = usb_init_ipp, ++ .init_common = usb_init_common_7211b0, ++ .init_xhci = usb_init_xhci, ++ .uninit_common = usb_uninit_common, ++ .uninit_xhci = usb_uninit_xhci, ++ .get_dual_select = usb_get_dual_select, ++ .set_dual_select = usb_set_dual_select, ++}; ++ + void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) + { + +@@ -169,3 +311,12 @@ void brcm_usb_dvr_init_7216(struct brcm_ + params->family_name = "7216"; + params->ops = &bcm7216_ops; + } ++ ++void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params) ++{ ++ ++ pr_debug("%s\n", __func__); ++ ++ params->family_name = "7211"; ++ params->ops = &bcm7211b0_ops; ++} +--- a/drivers/phy/broadcom/phy-brcm-usb-init.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.c +@@ -401,7 +401,7 @@ void usb_ctrl_unset_family(struct brcm_u + u32 mask; + + mask = params->usb_reg_bits_map[field]; +- brcm_usb_ctrl_unset(params->ctrl_regs + reg_offset, mask); ++ brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); + }; + + static inline +@@ -411,7 +411,7 @@ void usb_ctrl_set_family(struct brcm_usb + u32 mask; + + mask = params->usb_reg_bits_map[field]; +- brcm_usb_ctrl_set(params->ctrl_regs + reg_offset, mask); ++ brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); + }; + + static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) +@@ -544,7 +544,7 @@ static void brcmusb_usb3_pll_54mhz(struc + { + u32 ofs; + int ii; +- void __iomem *ctrl_base = params->ctrl_regs; ++ void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; + + /* + * On newer B53 based SoC's, the reference clock for the +@@ -625,7 +625,7 @@ static void brcmusb_usb3_ssc_enable(void + + static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) + { +- void __iomem *ctrl_base = params->ctrl_regs; ++ void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; + + brcmusb_usb3_pll_fix(ctrl_base); + brcmusb_usb3_pll_54mhz(params); +@@ -667,7 +667,7 @@ static void brcmusb_memc_fix(struct brcm + + static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) + { +- void __iomem *xhci_ec_base = params->xhci_ec_regs; ++ void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; + u32 val; + + if (params->family_id != 0x74371000 || !xhci_ec_base) +@@ -680,8 +680,8 @@ static void brcmusb_usb3_otp_fix(struct + brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + + /* Reset USB 3.0 PHY for workaround to take effect */ +- USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); +- USB_CTRL_SET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); ++ USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); ++ USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); + } + + static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, +@@ -740,7 +740,7 @@ static enum brcm_family_type get_family_ + + static void usb_init_ipp(struct brcm_usb_init_params *params) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + u32 orig_reg; + +@@ -786,7 +786,7 @@ static void usb_init_ipp(struct brcm_usb + static void usb_init_common(struct brcm_usb_init_params *params) + { + u32 reg; +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + /* Clear any pending wake conditions */ + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); +@@ -866,7 +866,7 @@ static void usb_init_common(struct brcm_ + static void usb_init_eohci(struct brcm_usb_init_params *params) + { + u32 reg; +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) + USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB); +@@ -902,7 +902,7 @@ static void usb_init_eohci(struct brcm_u + + static void usb_init_xhci(struct brcm_usb_init_params *params) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); + /* 1 millisecond - for USB clocks to settle down */ +@@ -944,12 +944,13 @@ static void usb_uninit_eohci(struct brcm + static void usb_uninit_xhci(struct brcm_usb_init_params *params) + { + brcmusb_xhci_soft_reset(params, 1); +- USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE); ++ USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL, ++ PHY3_IDDQ_OVERRIDE); + } + + static int usb_get_dual_select(struct brcm_usb_init_params *params) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); +@@ -963,7 +964,7 @@ static int usb_get_dual_select(struct br + + static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); +@@ -980,7 +981,7 @@ static void usb_set_dual_select(struct b + static void usb_wake_enable(struct brcm_usb_init_params *params, + int enable) + { +- void __iomem *ctrl = params->ctrl_regs; ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (enable) + USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); +--- a/drivers/phy/broadcom/phy-brcm-usb-init.h ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.h +@@ -6,12 +6,21 @@ + #ifndef _USB_BRCM_COMMON_INIT_H + #define _USB_BRCM_COMMON_INIT_H + ++#include <linux/regmap.h> ++ + #define USB_CTLR_MODE_HOST 0 + #define USB_CTLR_MODE_DEVICE 1 + #define USB_CTLR_MODE_DRD 2 + #define USB_CTLR_MODE_TYPEC_PD 3 + +-struct brcm_usb_init_params; ++enum brcmusb_reg_sel { ++ BRCM_REGS_CTRL = 0, ++ BRCM_REGS_XHCI_EC, ++ BRCM_REGS_XHCI_GBL, ++ BRCM_REGS_USB_PHY, ++ BRCM_REGS_USB_MDIO, ++ BRCM_REGS_MAX ++}; + + #define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) + #define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) +@@ -41,9 +50,7 @@ struct brcm_usb_init_ops { + }; + + struct brcm_usb_init_params { +- void __iomem *ctrl_regs; +- void __iomem *xhci_ec_regs; +- void __iomem *xhci_gbl_regs; ++ void __iomem *regs[BRCM_REGS_MAX]; + int ioc; + int ipp; + int mode; +@@ -53,10 +60,12 @@ struct brcm_usb_init_params { + const char *family_name; + const u32 *usb_reg_bits_map; + const struct brcm_usb_init_ops *ops; ++ struct regmap *syscon_piarbctl; + }; + + void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); + void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params); ++void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params); + + static inline u32 brcm_usb_readl(void __iomem *addr) + { +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -16,6 +16,7 @@ + #include <linux/interrupt.h> + #include <linux/soc/brcmstb/brcmstb.h> + #include <dt-bindings/phy/phy.h> ++#include <linux/mfd/syscon.h> + + #include "phy-brcm-usb-init.h" + +@@ -32,6 +33,11 @@ struct value_to_name_map { + const char *name; + }; + ++struct match_chip_info { ++ void *init_func; ++ u8 required_regs[BRCM_REGS_MAX + 1]; ++}; ++ + static struct value_to_name_map brcm_dr_mode_to_name[] = { + { USB_CTLR_MODE_HOST, "host" }, + { USB_CTLR_MODE_DEVICE, "peripheral" }, +@@ -64,6 +70,10 @@ struct brcm_usb_phy_data { + struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; + }; + ++static s8 *node_reg_names[BRCM_REGS_MAX] = { ++ "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio" ++}; ++ + static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) + { + struct phy *gphy = dev_id; +@@ -241,15 +251,86 @@ static const struct attribute_group brcm + .attrs = brcm_usb_phy_attrs, + }; + ++static struct match_chip_info chip_info_7216 = { ++ .init_func = &brcm_usb_dvr_init_7216, ++ .required_regs = { ++ BRCM_REGS_CTRL, ++ BRCM_REGS_XHCI_EC, ++ BRCM_REGS_XHCI_GBL, ++ -1, ++ }, ++}; ++ ++static struct match_chip_info chip_info_7211b0 = { ++ .init_func = &brcm_usb_dvr_init_7211b0, ++ .required_regs = { ++ BRCM_REGS_CTRL, ++ BRCM_REGS_XHCI_EC, ++ BRCM_REGS_XHCI_GBL, ++ BRCM_REGS_USB_PHY, ++ BRCM_REGS_USB_MDIO, ++ -1, ++ }, ++}; ++ ++static struct match_chip_info chip_info_7445 = { ++ .init_func = &brcm_usb_dvr_init_7445, ++ .required_regs = { ++ BRCM_REGS_CTRL, ++ BRCM_REGS_XHCI_EC, ++ -1, ++ }, ++}; ++ + static const struct of_device_id brcm_usb_dt_ids[] = { + { + .compatible = "brcm,bcm7216-usb-phy", +- .data = &brcm_usb_dvr_init_7216, ++ .data = &chip_info_7216, ++ }, ++ { ++ .compatible = "brcm,bcm7211-usb-phy", ++ .data = &chip_info_7211b0, ++ }, ++ { ++ .compatible = "brcm,brcmstb-usb-phy", ++ .data = &chip_info_7445, + }, +- { .compatible = "brcm,brcmstb-usb-phy" }, + { /* sentinel */ } + }; + ++static int brcm_usb_get_regs(struct platform_device *pdev, ++ enum brcmusb_reg_sel regs, ++ struct brcm_usb_init_params *ini) ++{ ++ struct resource *res; ++ ++ /* Older DT nodes have ctrl and optional xhci_ec by index only */ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ node_reg_names[regs]); ++ if (res == NULL) { ++ if (regs == BRCM_REGS_CTRL) { ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ } else if (regs == BRCM_REGS_XHCI_EC) { ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ /* XHCI_EC registers are optional */ ++ if (res == NULL) ++ return 0; ++ } ++ if (res == NULL) { ++ dev_err(&pdev->dev, "can't get %s base address\n", ++ node_reg_names[regs]); ++ return 1; ++ } ++ } ++ ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(ini->regs[regs])) { ++ dev_err(&pdev->dev, "can't map %s register space\n", ++ node_reg_names[regs]); ++ return 1; ++ } ++ return 0; ++} ++ + static int brcm_usb_phy_dvr_init(struct platform_device *pdev, + struct brcm_usb_phy_data *priv, + struct device_node *dn) +@@ -325,9 +406,6 @@ static int brcm_usb_phy_dvr_init(struct + + static int brcm_usb_phy_probe(struct platform_device *pdev) + { +- struct resource *res_ctrl; +- struct resource *res_xhciec = NULL; +- struct resource *res_xhcigbl = NULL; + struct device *dev = &pdev->dev; + struct brcm_usb_phy_data *priv; + struct phy_provider *phy_provider; +@@ -335,6 +413,10 @@ static int brcm_usb_phy_probe(struct pla + int err; + const char *mode; + const struct of_device_id *match; ++ void (*dvr_init)(struct brcm_usb_init_params *params); ++ const struct match_chip_info *info; ++ struct regmap *rmap; ++ int x; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) +@@ -345,58 +427,13 @@ static int brcm_usb_phy_probe(struct pla + priv->ini.product_id = brcmstb_get_product_id(); + + match = of_match_node(brcm_usb_dt_ids, dev->of_node); +- if (match && match->data) { +- void (*dvr_init)(struct brcm_usb_init_params *params); +- +- dvr_init = match->data; +- (*dvr_init)(&priv->ini); +- } else { +- brcm_usb_dvr_init_7445(&priv->ini); +- } ++ info = match->data; ++ dvr_init = info->init_func; ++ (*dvr_init)(&priv->ini); + + dev_dbg(dev, "Best mapping table is for %s\n", + priv->ini.family_name); + +- /* Newer DT node has reg-names. xhci_ec and xhci_gbl are optional. */ +- res_ctrl = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); +- if (res_ctrl != NULL) { +- res_xhciec = platform_get_resource_byname(pdev, +- IORESOURCE_MEM, +- "xhci_ec"); +- res_xhcigbl = platform_get_resource_byname(pdev, +- IORESOURCE_MEM, +- "xhci_gbl"); +- } else { +- /* Older DT node without reg-names, use index */ +- res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (res_ctrl == NULL) { +- dev_err(dev, "can't get CTRL base address\n"); +- return -EINVAL; +- } +- res_xhciec = platform_get_resource(pdev, IORESOURCE_MEM, 1); +- } +- priv->ini.ctrl_regs = devm_ioremap_resource(dev, res_ctrl); +- if (IS_ERR(priv->ini.ctrl_regs)) { +- dev_err(dev, "can't map CTRL register space\n"); +- return -EINVAL; +- } +- if (res_xhciec) { +- priv->ini.xhci_ec_regs = +- devm_ioremap_resource(dev, res_xhciec); +- if (IS_ERR(priv->ini.xhci_ec_regs)) { +- dev_err(dev, "can't map XHCI EC register space\n"); +- return -EINVAL; +- } +- } +- if (res_xhcigbl) { +- priv->ini.xhci_gbl_regs = +- devm_ioremap_resource(dev, res_xhcigbl); +- if (IS_ERR(priv->ini.xhci_gbl_regs)) { +- dev_err(dev, "can't map XHCI Global register space\n"); +- return -EINVAL; +- } +- } +- + of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp); + of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc); + +@@ -412,6 +449,16 @@ static int brcm_usb_phy_probe(struct pla + if (of_property_read_bool(dn, "brcm,has-eohci")) + priv->has_eohci = true; + ++ for (x = 0; x < BRCM_REGS_MAX; x++) { ++ if (info->required_regs[x] >= BRCM_REGS_MAX) ++ break; ++ ++ err = brcm_usb_get_regs(pdev, info->required_regs[x], ++ &priv->ini); ++ if (err) ++ return -EINVAL; ++ } ++ + err = brcm_usb_phy_dvr_init(pdev, priv, dn); + if (err) + return err; +@@ -431,6 +478,15 @@ static int brcm_usb_phy_probe(struct pla + if (err) + dev_warn(dev, "Error creating sysfs attributes\n"); + ++ /* Get piarbctl syscon if it exists */ ++ rmap = syscon_regmap_lookup_by_phandle(dev->of_node, ++ "syscon-piarbctl"); ++ if (IS_ERR(rmap)) ++ rmap = syscon_regmap_lookup_by_phandle(dev->of_node, ++ "brcm,syscon-piarbctl"); ++ if (!IS_ERR(rmap)) ++ priv->ini.syscon_piarbctl = rmap; ++ + /* start with everything off */ + if (priv->has_xhci) + brcm_usb_uninit_xhci(&priv->ini); diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0009-phy-usb-fix-driver-to-defer-on-clk_get-defer.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0009-phy-usb-fix-driver-to-defer-on-clk_get-defer.patch new file mode 100644 index 0000000000..a9e4b60ea6 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0009-phy-usb-fix-driver-to-defer-on-clk_get-defer.patch @@ -0,0 +1,44 @@ +From 89927fe0061aaa69b39e95ed793d2c61903b7895 Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:07 -0500 +Subject: [PATCH] phy: usb: fix driver to defer on clk_get defer + +Handle defer on clk_get because the new SCMI clock driver comes +up after this driver. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -341,6 +341,8 @@ static int brcm_usb_phy_dvr_init(struct + + priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb"); + if (IS_ERR(priv->usb_20_clk)) { ++ if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; + dev_info(dev, "Clock not found in Device Tree\n"); + priv->usb_20_clk = NULL; + } +@@ -371,6 +373,8 @@ static int brcm_usb_phy_dvr_init(struct + + priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3"); + if (IS_ERR(priv->usb_30_clk)) { ++ if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; + dev_info(dev, + "USB3.0 clock not found in Device Tree\n"); + priv->usb_30_clk = NULL; +@@ -382,6 +386,8 @@ static int brcm_usb_phy_dvr_init(struct + + priv->suspend_clk = clk_get(dev, "usb0_freerun"); + if (IS_ERR(priv->suspend_clk)) { ++ if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER) ++ return -EPROBE_DEFER; + dev_err(dev, "Suspend Clock not found in Device Tree\n"); + priv->suspend_clk = NULL; + } diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0010-phy-usb-PHY-s-MDIO-registers-not-accessible-without-.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0010-phy-usb-PHY-s-MDIO-registers-not-accessible-without-.patch new file mode 100644 index 0000000000..48f829f799 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0010-phy-usb-PHY-s-MDIO-registers-not-accessible-without-.patch @@ -0,0 +1,44 @@ +From fc430aea02068150d053ef24bc424db3dd1357d4 Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:08 -0500 +Subject: [PATCH] phy: usb: PHY's MDIO registers not accessible without device + installed + +When there is no device connected and FSM is enabled, the XHCI puts +the PHY into suspend mode. When the PHY is put into suspend mode +the USB LDO powers down the PHY. This causes the MDIO to be +inaccessible and its registers reset to default. The fix is to +disable FSM. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +@@ -56,6 +56,7 @@ + #define USB_PHY_PLL_LDO_CTL 0x08 + #define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 + #define USB_PHY_UTMI_CTL_1 0x04 ++#define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800 + #define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c + #define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 + #define USB_PHY_STATUS 0x20 +@@ -229,6 +230,14 @@ static void usb_init_common_7211b0(struc + + usb_init_common(params); + ++ /* ++ * Disable FSM, otherwise the PHY will auto suspend when no ++ * device is connected and will be reset on resume. ++ */ ++ reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); ++ reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; ++ brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); ++ + usb2_eye_fix_7211b0(params); + } + diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0011-phy-usb-bdc-Fix-occasional-failure-with-BDC-on-7211.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0011-phy-usb-bdc-Fix-occasional-failure-with-BDC-on-7211.patch new file mode 100644 index 0000000000..80ec141685 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0011-phy-usb-bdc-Fix-occasional-failure-with-BDC-on-7211.patch @@ -0,0 +1,135 @@ +From bed63b636fedf47dbab899a5193ec5ec4539f6fc Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:09 -0500 +Subject: [PATCH] phy: usb: bdc: Fix occasional failure with BDC on 7211 + +The BDC "Read Transaction Size" needs to be changed from 1024 +bytes to 256 bytes to prevent occasional transaction failures. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 18 +++++++++++++++ + drivers/phy/broadcom/phy-brcm-usb-init.h | 1 + + drivers/phy/broadcom/phy-brcm-usb.c | 23 +++++++++++++++---- + 3 files changed, 38 insertions(+), 4 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +@@ -70,6 +70,11 @@ + #define USB_GMDIOCSR 0 + #define USB_GMDIOGEN 4 + ++/* Register definitions for the BDC EC block in 7211b0 */ ++#define BDC_EC_AXIRDA 0x0c ++#define BDC_EC_AXIRDA_RTS_MASK 0xf0000000 ++#define BDC_EC_AXIRDA_RTS_SHIFT 28 ++ + + static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, + uint8_t addr, uint16_t data) +@@ -198,6 +203,7 @@ static void usb_init_common_7211b0(struc + { + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; ++ void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC]; + int timeout_ms = PHY_LOCK_TIMEOUT_MS; + u32 reg; + +@@ -231,6 +237,18 @@ static void usb_init_common_7211b0(struc + usb_init_common(params); + + /* ++ * The BDC controller will get occasional failures with ++ * the default "Read Transaction Size" of 6 (1024 bytes). ++ * Set it to 4 (256 bytes). ++ */ ++ if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) { ++ reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA); ++ reg &= ~BDC_EC_AXIRDA_RTS_MASK; ++ reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT); ++ brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA); ++ } ++ ++ /* + * Disable FSM, otherwise the PHY will auto suspend when no + * device is connected and will be reset on resume. + */ +--- a/drivers/phy/broadcom/phy-brcm-usb-init.h ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.h +@@ -19,6 +19,7 @@ enum brcmusb_reg_sel { + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, ++ BRCM_REGS_BDC_EC, + BRCM_REGS_MAX + }; + +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -36,6 +36,7 @@ struct value_to_name_map { + struct match_chip_info { + void *init_func; + u8 required_regs[BRCM_REGS_MAX + 1]; ++ u8 optional_reg; + }; + + static struct value_to_name_map brcm_dr_mode_to_name[] = { +@@ -71,7 +72,7 @@ struct brcm_usb_phy_data { + }; + + static s8 *node_reg_names[BRCM_REGS_MAX] = { +- "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio" ++ "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" + }; + + static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) +@@ -271,6 +272,7 @@ static struct match_chip_info chip_info_ + BRCM_REGS_USB_MDIO, + -1, + }, ++ .optional_reg = BRCM_REGS_BDC_EC, + }; + + static struct match_chip_info chip_info_7445 = { +@@ -300,7 +302,8 @@ static const struct of_device_id brcm_us + + static int brcm_usb_get_regs(struct platform_device *pdev, + enum brcmusb_reg_sel regs, +- struct brcm_usb_init_params *ini) ++ struct brcm_usb_init_params *ini, ++ bool optional) + { + struct resource *res; + +@@ -317,7 +320,13 @@ static int brcm_usb_get_regs(struct plat + return 0; + } + if (res == NULL) { +- dev_err(&pdev->dev, "can't get %s base address\n", ++ if (optional) { ++ dev_dbg(&pdev->dev, ++ "Optional reg %s not found\n", ++ node_reg_names[regs]); ++ return 0; ++ } ++ dev_err(&pdev->dev, "can't get %s base addr\n", + node_reg_names[regs]); + return 1; + } +@@ -460,7 +469,13 @@ static int brcm_usb_phy_probe(struct pla + break; + + err = brcm_usb_get_regs(pdev, info->required_regs[x], +- &priv->ini); ++ &priv->ini, false); ++ if (err) ++ return -EINVAL; ++ } ++ if (info->optional_reg) { ++ err = brcm_usb_get_regs(pdev, info->optional_reg, ++ &priv->ini, true); + if (err) + return -EINVAL; + } diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0012-phy-usb-USB-driver-is-crashing-during-S3-resume-on-7.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0012-phy-usb-USB-driver-is-crashing-during-S3-resume-on-7.patch new file mode 100644 index 0000000000..b10f86d0a3 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0012-phy-usb-USB-driver-is-crashing-during-S3-resume-on-7.patch @@ -0,0 +1,26 @@ +From 5dfe1cec580829faa49842672a25481b104c26ef Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:10 -0500 +Subject: [PATCH] phy: usb: USB driver is crashing during S3 resume on 7216 + +This is a result of the USB 2.0 clocks not being disabled/enabled +during suspend/resume on XHCI only systems. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -543,7 +543,7 @@ static int brcm_usb_phy_suspend(struct d + brcm_usb_wake_enable(&priv->ini, true); + if (priv->phys[BRCM_USB_PHY_3_0].inited) + clk_disable_unprepare(priv->usb_30_clk); +- if (priv->phys[BRCM_USB_PHY_2_0].inited) ++ if (priv->phys[BRCM_USB_PHY_2_0].inited || !priv->has_eohci) + clk_disable_unprepare(priv->usb_20_clk); + if (priv->wake_irq >= 0) + enable_irq_wake(priv->wake_irq); diff --git a/target/linux/bcm4908/patches-5.4/084-v5.6-0013-phy-usb-Add-support-for-wake-and-USB-low-power-mode-.patch b/target/linux/bcm4908/patches-5.4/084-v5.6-0013-phy-usb-Add-support-for-wake-and-USB-low-power-mode-.patch new file mode 100644 index 0000000000..5a3a687adb --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/084-v5.6-0013-phy-usb-Add-support-for-wake-and-USB-low-power-mode-.patch @@ -0,0 +1,328 @@ +From b0c0b66c0b432d3f3a1ae5849298ba9c7f1810c5 Mon Sep 17 00:00:00 2001 +From: Al Cooper <alcooperx@gmail.com> +Date: Fri, 3 Jan 2020 13:18:11 -0500 +Subject: [PATCH] phy: usb: Add support for wake and USB low power mode for + 7211 S2/S5 + +Add support for 7211 USB wake. Disable all possible 7211 USB logic +for S2/S5 if USB wake is not enabled. + +On the 7211, the XHCI wake signal was not connected properly and +only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register. +The workaround is to have VPU code running that polls for the +proper bit in the DIAG register and to wake the system when +the bit is asserted. + +Signed-off-by: Al Cooper <alcooperx@gmail.com> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 77 +++++++++++++++++-- + drivers/phy/broadcom/phy-brcm-usb-init.c | 26 ++++--- + drivers/phy/broadcom/phy-brcm-usb-init.h | 11 +-- + drivers/phy/broadcom/phy-brcm-usb.c | 25 ++++-- + 4 files changed, 105 insertions(+), 34 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +@@ -26,7 +26,6 @@ + #define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00 + #define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0 + #define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f +-#define PIARBCTL_USB_M_ASB_CTRL 0x10 + + #define PIARBCTL_MISC_USB_ONLY_MASK \ + (PIARBCTL_MISC_USB_SELECT_MASK | \ +@@ -51,14 +50,27 @@ + #define USB_CTRL_USB_PM_STATUS 0x08 + #define USB_CTRL_USB_DEVICE_CTL1 0x10 + #define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 ++#define USB_CTRL_TEST_PORT_CTL 0x30 ++#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK 0x000000ff ++#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK 0x0000002e ++#define USB_CTRL_TP_DIAG1 0x34 ++#define USB_CTLR_TP_DIAG1_wake_MASK 0x00000002 ++#define USB_CTRL_CTLR_CSHCR 0x50 ++#define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK 0x00040000 + + /* Register definitions for the USB_PHY block in 7211b0 */ ++#define USB_PHY_PLL_CTL 0x00 ++#define USB_PHY_PLL_CTL_PLL_RESETB_MASK 0x40000000 + #define USB_PHY_PLL_LDO_CTL 0x08 + #define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 ++#define USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK 0x00000002 ++#define USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK 0x00000001 + #define USB_PHY_UTMI_CTL_1 0x04 + #define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800 + #define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c + #define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 ++#define USB_PHY_IDDQ 0x1c ++#define USB_PHY_IDDQ_phy_iddq_MASK 0x00000001 + #define USB_PHY_STATUS 0x20 + #define USB_PHY_STATUS_pll_lock_MASK 0x00000001 + +@@ -199,6 +211,17 @@ static void usb_init_common(struct brcm_ + } + } + ++static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params, ++ bool enable) ++{ ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; ++ ++ if (enable) ++ USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en); ++ else ++ USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en); ++} ++ + static void usb_init_common_7211b0(struct brcm_usb_init_params *params) + { + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; +@@ -210,9 +233,27 @@ static void usb_init_common_7211b0(struc + if (params->syscon_piarbctl) + syscon_piarbctl_init(params->syscon_piarbctl); + ++ USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); ++ ++ usb_wake_enable_7211b0(params, false); ++ if (!params->wake_enabled) { ++ ++ /* undo possible suspend settings */ ++ brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ); ++ reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); ++ reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK; ++ brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); ++ ++ /* temporarily enable FSM so PHY comes up properly */ ++ reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); ++ reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; ++ brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); ++ } ++ + /* Init the PHY */ +- reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_LDO_CTL); +- reg |= USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK; ++ reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK | ++ USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK | ++ USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL); + + /* wait for lock */ +@@ -276,12 +317,36 @@ static void usb_uninit_common(struct brc + + } + ++static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params) ++{ ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; ++ void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; ++ u32 reg; ++ ++ pr_debug("%s\n", __func__); ++ ++ if (params->wake_enabled) { ++ USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN); ++ usb_wake_enable_7211b0(params, true); ++ } else { ++ USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); ++ brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL); ++ reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); ++ reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK; ++ brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); ++ brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK, ++ usb_phy + USB_PHY_IDDQ); ++ } ++ ++} ++ + static void usb_uninit_xhci(struct brcm_usb_init_params *params) + { + + pr_debug("%s\n", __func__); + +- xhci_soft_reset(params, 1); ++ if (!params->wake_enabled) ++ xhci_soft_reset(params, 1); + } + + static int usb_get_dual_select(struct brcm_usb_init_params *params) +@@ -309,7 +374,6 @@ static void usb_set_dual_select(struct b + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } + +- + static const struct brcm_usb_init_ops bcm7216_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common, +@@ -324,7 +388,7 @@ static const struct brcm_usb_init_ops bc + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_7211b0, + .init_xhci = usb_init_xhci, +- .uninit_common = usb_uninit_common, ++ .uninit_common = usb_uninit_common_7211b0, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +@@ -346,4 +410,5 @@ void brcm_usb_dvr_init_7211b0(struct brc + + params->family_name = "7211"; + params->ops = &bcm7211b0_ops; ++ params->suspend_with_clocks = true; + } +--- a/drivers/phy/broadcom/phy-brcm-usb-init.c ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.c +@@ -783,12 +783,24 @@ static void usb_init_ipp(struct brcm_usb + msleep(50); + } + ++static void usb_wake_enable(struct brcm_usb_init_params *params, ++ bool enable) ++{ ++ void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; ++ ++ if (enable) ++ USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); ++ else ++ USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); ++} ++ + static void usb_init_common(struct brcm_usb_init_params *params) + { + u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + /* Clear any pending wake conditions */ ++ usb_wake_enable(params, false); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); + +@@ -935,6 +947,8 @@ static void usb_uninit_common(struct brc + + if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) + USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); ++ if (params->wake_enabled) ++ usb_wake_enable(params, true); + } + + static void usb_uninit_eohci(struct brcm_usb_init_params *params) +@@ -978,17 +992,6 @@ static void usb_set_dual_select(struct b + } + } + +-static void usb_wake_enable(struct brcm_usb_init_params *params, +- int enable) +-{ +- void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; +- +- if (enable) +- USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); +- else +- USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); +-} +- + static const struct brcm_usb_init_ops bcm7445_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common, +@@ -999,7 +1002,6 @@ static const struct brcm_usb_init_ops bc + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +- .wake_enable = usb_wake_enable, + }; + + void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params) +--- a/drivers/phy/broadcom/phy-brcm-usb-init.h ++++ b/drivers/phy/broadcom/phy-brcm-usb-init.h +@@ -46,8 +46,6 @@ struct brcm_usb_init_ops { + void (*uninit_xhci)(struct brcm_usb_init_params *params); + int (*get_dual_select)(struct brcm_usb_init_params *params); + void (*set_dual_select)(struct brcm_usb_init_params *params, int mode); +- void (*wake_enable)(struct brcm_usb_init_params *params, +- int enable); + }; + + struct brcm_usb_init_params { +@@ -62,6 +60,8 @@ struct brcm_usb_init_params { + const u32 *usb_reg_bits_map; + const struct brcm_usb_init_ops *ops; + struct regmap *syscon_piarbctl; ++ bool wake_enabled; ++ bool suspend_with_clocks; + }; + + void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); +@@ -145,13 +145,6 @@ static inline void brcm_usb_uninit_xhci( + ini->ops->uninit_xhci(ini); + } + +-static inline void brcm_usb_wake_enable(struct brcm_usb_init_params *ini, +- int enable) +-{ +- if (ini->ops->wake_enable) +- ini->ops->wake_enable(ini, enable); +-} +- + static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini) + { + if (ini->ops->get_dual_select) +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -535,16 +535,26 @@ static int brcm_usb_phy_suspend(struct d + struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); + + if (priv->init_count) { ++ priv->ini.wake_enabled = device_may_wakeup(dev); + if (priv->phys[BRCM_USB_PHY_3_0].inited) + brcm_usb_uninit_xhci(&priv->ini); + if (priv->phys[BRCM_USB_PHY_2_0].inited) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); +- brcm_usb_wake_enable(&priv->ini, true); +- if (priv->phys[BRCM_USB_PHY_3_0].inited) +- clk_disable_unprepare(priv->usb_30_clk); +- if (priv->phys[BRCM_USB_PHY_2_0].inited || !priv->has_eohci) +- clk_disable_unprepare(priv->usb_20_clk); ++ ++ /* ++ * Handle the clocks unless needed for wake. This has ++ * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks ++ * and newer XHCI->2.0-clks/3.0-clks. ++ */ ++ ++ if (!priv->ini.suspend_with_clocks) { ++ if (priv->phys[BRCM_USB_PHY_3_0].inited) ++ clk_disable_unprepare(priv->usb_30_clk); ++ if (priv->phys[BRCM_USB_PHY_2_0].inited || ++ !priv->has_eohci) ++ clk_disable_unprepare(priv->usb_20_clk); ++ } + if (priv->wake_irq >= 0) + enable_irq_wake(priv->wake_irq); + } +@@ -557,7 +567,6 @@ static int brcm_usb_phy_resume(struct de + + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); +- brcm_usb_wake_enable(&priv->ini, false); + brcm_usb_init_ipp(&priv->ini); + + /* +@@ -579,6 +588,8 @@ static int brcm_usb_phy_resume(struct de + } else if (priv->has_xhci) { + brcm_usb_uninit_xhci(&priv->ini); + clk_disable_unprepare(priv->usb_30_clk); ++ if (!priv->has_eohci) ++ clk_disable_unprepare(priv->usb_20_clk); + } + } else { + if (priv->has_xhci) +@@ -589,7 +600,7 @@ static int brcm_usb_phy_resume(struct de + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); + } +- ++ priv->ini.wake_enabled = false; + return 0; + } + #endif /* CONFIG_PM_SLEEP */ diff --git a/target/linux/bcm4908/patches-5.4/085-v5.8-0001-phy-phy-brcm-usb-Constify-static-structs.patch b/target/linux/bcm4908/patches-5.4/085-v5.8-0001-phy-phy-brcm-usb-Constify-static-structs.patch new file mode 100644 index 0000000000..36683fc437 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/085-v5.8-0001-phy-phy-brcm-usb-Constify-static-structs.patch @@ -0,0 +1,99 @@ +From c79cc3d55c4bf94e9028d6818d449fbdc488eac5 Mon Sep 17 00:00:00 2001 +From: Rikard Falkeborn <rikard.falkeborn@gmail.com> +Date: Sat, 16 May 2020 14:04:41 +0200 +Subject: [PATCH] phy: phy-brcm-usb: Constify static structs + +A number of structs were not modified and can therefore be made const +to allow the compiler to put them in read-only memory. + +In order to do so, update a few functions that don't modify there input +to take pointers to const. + +Before: + text data bss dec hex filename + 15511 6448 64 22023 5607 drivers/phy/broadcom/phy-brcm-usb.o + +After: + text data bss dec hex filename + 16058 5936 64 22058 562a drivers/phy/broadcom/phy-brcm-usb.o + +Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> +Link: https://lore.kernel.org/r/20200516120441.7627-4-rikard.falkeborn@gmail.com +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/broadcom/phy-brcm-usb.c | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -39,14 +39,14 @@ struct match_chip_info { + u8 optional_reg; + }; + +-static struct value_to_name_map brcm_dr_mode_to_name[] = { ++static const struct value_to_name_map brcm_dr_mode_to_name[] = { + { USB_CTLR_MODE_HOST, "host" }, + { USB_CTLR_MODE_DEVICE, "peripheral" }, + { USB_CTLR_MODE_DRD, "drd" }, + { USB_CTLR_MODE_TYPEC_PD, "typec-pd" } + }; + +-static struct value_to_name_map brcm_dual_mode_to_name[] = { ++static const struct value_to_name_map brcm_dual_mode_to_name[] = { + { 0, "host" }, + { 1, "device" }, + { 2, "auto" }, +@@ -138,7 +138,7 @@ static int brcm_usb_phy_exit(struct phy + return 0; + } + +-static struct phy_ops brcm_usb_phy_ops = { ++static const struct phy_ops brcm_usb_phy_ops = { + .init = brcm_usb_phy_init, + .exit = brcm_usb_phy_exit, + .owner = THIS_MODULE, +@@ -170,7 +170,7 @@ static struct phy *brcm_usb_phy_xlate(st + return ERR_PTR(-ENODEV); + } + +-static int name_to_value(struct value_to_name_map *table, int count, ++static int name_to_value(const struct value_to_name_map *table, int count, + const char *name, int *value) + { + int x; +@@ -185,7 +185,7 @@ static int name_to_value(struct value_to + return -EINVAL; + } + +-static const char *value_to_name(struct value_to_name_map *table, int count, ++static const char *value_to_name(const struct value_to_name_map *table, int count, + int value) + { + if (value >= count) +@@ -252,7 +252,7 @@ static const struct attribute_group brcm + .attrs = brcm_usb_phy_attrs, + }; + +-static struct match_chip_info chip_info_7216 = { ++static const struct match_chip_info chip_info_7216 = { + .init_func = &brcm_usb_dvr_init_7216, + .required_regs = { + BRCM_REGS_CTRL, +@@ -262,7 +262,7 @@ static struct match_chip_info chip_info_ + }, + }; + +-static struct match_chip_info chip_info_7211b0 = { ++static const struct match_chip_info chip_info_7211b0 = { + .init_func = &brcm_usb_dvr_init_7211b0, + .required_regs = { + BRCM_REGS_CTRL, +@@ -275,7 +275,7 @@ static struct match_chip_info chip_info_ + .optional_reg = BRCM_REGS_BDC_EC, + }; + +-static struct match_chip_info chip_info_7445 = { ++static const struct match_chip_info chip_info_7445 = { + .init_func = &brcm_usb_dvr_init_7445, + .required_regs = { + BRCM_REGS_CTRL, diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch new file mode 100644 index 0000000000..cc71373165 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch @@ -0,0 +1,49 @@ +From d14f4cce9340a6586512a0eb6bc680dedeaaef14 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Wed, 16 Dec 2020 15:33:04 +0100 +Subject: [PATCH] phy: phy-brcm-usb: improve getting OF matching data +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +1. Use of_device_get_match_data() helper to simplify the code +2. Check for NULL as a good practice + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Acked-by: Florian Fainelli <f.fainelli@gmail.com> +Link: https://lore.kernel.org/r/20201216143305.12179-1-zajec5@gmail.com +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + drivers/phy/broadcom/phy-brcm-usb.c | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -11,6 +11,7 @@ + #include <linux/io.h> + #include <linux/module.h> + #include <linux/of.h> ++#include <linux/of_device.h> + #include <linux/phy/phy.h> + #include <linux/platform_device.h> + #include <linux/interrupt.h> +@@ -427,7 +428,6 @@ static int brcm_usb_phy_probe(struct pla + struct device_node *dn = pdev->dev.of_node; + int err; + const char *mode; +- const struct of_device_id *match; + void (*dvr_init)(struct brcm_usb_init_params *params); + const struct match_chip_info *info; + struct regmap *rmap; +@@ -441,8 +441,9 @@ static int brcm_usb_phy_probe(struct pla + priv->ini.family_id = brcmstb_get_family_id(); + priv->ini.product_id = brcmstb_get_product_id(); + +- match = of_match_node(brcm_usb_dt_ids, dev->of_node); +- info = match->data; ++ info = of_device_get_match_data(&pdev->dev); ++ if (!info) ++ return -ENOENT; + dvr_init = info->init_func; + (*dvr_init)(&priv->ini); + diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch new file mode 100644 index 0000000000..bdc932732c --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch @@ -0,0 +1,50 @@ +From 915f1d230e5292bc2156a9997bcb19d9e632f10b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Wed, 16 Dec 2020 15:33:05 +0100 +Subject: [PATCH] phy: phy-brcm-usb: specify init function format at struct + level +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is slightly cleaner solution that assures noone assings a wrong +function to the pointer. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Acked-by: Florian Fainelli <f.fainelli@gmail.com> +Link: https://lore.kernel.org/r/20201216143305.12179-2-zajec5@gmail.com +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + drivers/phy/broadcom/phy-brcm-usb.c | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -35,7 +35,7 @@ struct value_to_name_map { + }; + + struct match_chip_info { +- void *init_func; ++ void (*init_func)(struct brcm_usb_init_params *params); + u8 required_regs[BRCM_REGS_MAX + 1]; + u8 optional_reg; + }; +@@ -428,7 +428,6 @@ static int brcm_usb_phy_probe(struct pla + struct device_node *dn = pdev->dev.of_node; + int err; + const char *mode; +- void (*dvr_init)(struct brcm_usb_init_params *params); + const struct match_chip_info *info; + struct regmap *rmap; + int x; +@@ -444,8 +443,8 @@ static int brcm_usb_phy_probe(struct pla + info = of_device_get_match_data(&pdev->dev); + if (!info) + return -ENOENT; +- dvr_init = info->init_func; +- (*dvr_init)(&priv->ini); ++ ++ info->init_func(&priv->ini); + + dev_dbg(dev, "Best mapping table is for %s\n", + priv->ini.family_name); diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch new file mode 100644 index 0000000000..1edd63ea5d --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/086-v5.12-0003-dt-bindings-phy-brcm-brcmstb-usb-phy-convert-to-the-.patch @@ -0,0 +1,315 @@ +From b39069a482ade0c5e18c407c3218ba1aeed371b6 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Wed, 6 Jan 2021 21:58:36 +0100 +Subject: [PATCH] dt-bindings: phy: brcm, brcmstb-usb-phy: convert to the + json-schema +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Changes that require mentioning: +1. interrupt-names + Name "wakeup" was changed to the "wake". It matches example and what + Linux driver looks for in the first place +2. brcm,ipp and brcm,ioc + Both were described as booleans with 0 / 1 values. In examples they + were integers and Linux checks for int as well. Both got uint32. +3. Added minimal description + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Reviewed-by: Rob Herring <robh@kernel.org> +Link: https://lore.kernel.org/r/20210106205838.10964-1-zajec5@gmail.com +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + .../bindings/phy/brcm,brcmstb-usb-phy.txt | 86 -------- + .../bindings/phy/brcm,brcmstb-usb-phy.yaml | 193 ++++++++++++++++++ + 2 files changed, 193 insertions(+), 86 deletions(-) + delete mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt + create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml + +--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt ++++ /dev/null +@@ -1,86 +0,0 @@ +-Broadcom STB USB PHY +- +-Required properties: +-- compatible: should be one of +- "brcm,brcmstb-usb-phy" +- "brcm,bcm7216-usb-phy" +- "brcm,bcm7211-usb-phy" +- +-- reg and reg-names properties requirements are specific to the +- compatible string. +- "brcm,brcmstb-usb-phy": +- - reg: 1 or 2 offset and length pairs. One for the base CTRL registers +- and an optional pair for systems with USB 3.x support +- - reg-names: not specified +- "brcm,bcm7216-usb-phy": +- - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL +- registers +- - reg-names: "ctrl", "xhci_ec", "xhci_gbl" +- "brcm,bcm7211-usb-phy": +- - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL, +- USB_PHY and USB_MDIO registers and an optional pair +- for the BDC registers +- - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" +- +-- #phy-cells: Shall be 1 as it expects one argument for setting +- the type of the PHY. Possible values are: +- - PHY_TYPE_USB2 for USB1.1/2.0 PHY +- - PHY_TYPE_USB3 for USB3.x PHY +- +-Optional Properties: +-- clocks : clock phandles. +-- clock-names: String, clock name. +-- interrupts: wakeup interrupt +-- interrupt-names: "wakeup" +-- brcm,ipp: Boolean, Invert Port Power. +- Possible values are: 0 (Don't invert), 1 (Invert) +-- brcm,ioc: Boolean, Invert Over Current detection. +- Possible values are: 0 (Don't invert), 1 (Invert) +-- dr_mode: String, PHY Device mode. +- Possible values are: "host", "peripheral ", "drd" or "typec-pd" +- If this property is not defined, the phy will default to "host" mode. +-- brcm,syscon-piarbctl: phandle to syscon for handling config registers +-NOTE: one or both of the following two properties must be set +-- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +-- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. +- +- +-Example: +- +-usbphy_0: usb-phy@f0470200 { +- reg = <0xf0470200 0xb8>, +- <0xf0471940 0x6c0>; +- compatible = "brcm,brcmstb-usb-phy"; +- #phy-cells = <1>; +- dr_mode = "host" +- brcm,ioc = <1>; +- brcm,ipp = <1>; +- brcm,has-xhci; +- brcm,has-eohci; +- clocks = <&usb20>, <&usb30>; +- clock-names = "sw_usb", "sw_usb3"; +-}; +- +-usb-phy@29f0200 { +- reg = <0x29f0200 0x200>, +- <0x29c0880 0x30>, +- <0x29cc100 0x534>, +- <0x2808000 0x24>, +- <0x2980080 0x8>; +- reg-names = "ctrl", +- "xhci_ec", +- "xhci_gbl", +- "usb_phy", +- "usb_mdio"; +- brcm,ioc = <0x0>; +- brcm,ipp = <0x0>; +- compatible = "brcm,bcm7211-usb-phy"; +- interrupts = <0x30>; +- interrupt-parent = <&vpu_intr1_nosec_intc>; +- interrupt-names = "wake"; +- #phy-cells = <0x1>; +- brcm,has-xhci; +- syscon-piarbctl = <&syscon_piarbctl>; +- clocks = <&scmi_clk 256>; +- clock-names = "sw_usb"; +-}; +--- /dev/null ++++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml +@@ -0,0 +1,193 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom STB USB PHY ++ ++description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI ++ ++maintainers: ++ - Al Cooper <alcooperx@gmail.com> ++ - Rafał Miłecki <rafal@milecki.pl> ++ ++properties: ++ compatible: ++ enum: ++ - brcm,bcm7211-usb-phy ++ - brcm,bcm7216-usb-phy ++ - brcm,brcmstb-usb-phy ++ ++ reg: ++ minItems: 1 ++ maxItems: 6 ++ items: ++ - description: the base CTRL register ++ - description: XHCI EC register ++ - description: XHCI GBL register ++ - description: USB PHY register ++ - description: USB MDIO register ++ - description: BDC register ++ ++ reg-names: ++ minItems: 1 ++ maxItems: 6 ++ items: ++ - const: ctrl ++ - const: xhci_ec ++ - const: xhci_gbl ++ - const: usb_phy ++ - const: usb_mdio ++ - const: bdc_ec ++ ++ clocks: ++ minItems: 1 ++ maxItems: 2 ++ ++ clock-names: ++ minItems: 1 ++ maxItems: 2 ++ items: ++ - const: sw_usb ++ - const: sw_usb3 ++ ++ interrupts: ++ description: wakeup interrupt ++ ++ interrupt-names: ++ const: wake ++ ++ brcm,ipp: ++ $ref: /schemas/types.yaml#/definitions/uint32 ++ description: Invert Port Power ++ minimum: 0 ++ maximum: 1 ++ ++ brcm,ioc: ++ $ref: /schemas/types.yaml#/definitions/uint32 ++ description: Invert Over Current detection ++ minimum: 0 ++ maximum: 1 ++ ++ dr_mode: ++ description: PHY Device mode. If this property is not defined, the PHY will ++ default to "host" mode. ++ enum: ++ - host ++ - peripheral ++ - drd ++ - typec-pd ++ ++ brcm,syscon-piarbctl: ++ description: phandle to syscon for handling config registers ++ $ref: /schemas/types.yaml#/definitions/phandle ++ ++ brcm,has-xhci: ++ description: Indicates the PHY has an XHCI PHY. ++ type: boolean ++ ++ brcm,has-eohci: ++ description: Indicates the PHY has an EHCI/OHCI PHY. ++ type: boolean ++ ++ "#phy-cells": ++ description: | ++ Cell allows setting the type of the PHY. Possible values are: ++ - PHY_TYPE_USB2 for USB1.1/2.0 PHY ++ - PHY_TYPE_USB3 for USB3.x PHY ++ const: 1 ++ ++required: ++ - reg ++ - "#phy-cells" ++ ++anyOf: ++ - required: ++ - brcm,has-xhci ++ - required: ++ - brcm,has-eohci ++ ++allOf: ++ - if: ++ properties: ++ compatible: ++ contains: ++ const: brcm,brcmstb-usb-phy ++ then: ++ properties: ++ reg: ++ minItems: 1 ++ maxItems: 2 ++ - if: ++ properties: ++ compatible: ++ contains: ++ const: brcm,bcm7211-usb-phy ++ then: ++ properties: ++ reg: ++ minItems: 5 ++ maxItems: 6 ++ reg-names: ++ minItems: 5 ++ maxItems: 6 ++ - if: ++ properties: ++ compatible: ++ contains: ++ const: brcm,bcm7216-usb-phy ++ then: ++ properties: ++ reg: ++ minItems: 3 ++ maxItems: 3 ++ reg-names: ++ minItems: 3 ++ maxItems: 3 ++ ++additionalProperties: false ++ ++examples: ++ - | ++ #include <dt-bindings/phy/phy.h> ++ ++ usb-phy@f0470200 { ++ compatible = "brcm,brcmstb-usb-phy"; ++ reg = <0xf0470200 0xb8>, ++ <0xf0471940 0x6c0>; ++ #phy-cells = <1>; ++ dr_mode = "host"; ++ brcm,ioc = <1>; ++ brcm,ipp = <1>; ++ brcm,has-xhci; ++ brcm,has-eohci; ++ clocks = <&usb20>, <&usb30>; ++ clock-names = "sw_usb", "sw_usb3"; ++ }; ++ - | ++ #include <dt-bindings/phy/phy.h> ++ ++ usb-phy@29f0200 { ++ compatible = "brcm,bcm7211-usb-phy"; ++ reg = <0x29f0200 0x200>, ++ <0x29c0880 0x30>, ++ <0x29cc100 0x534>, ++ <0x2808000 0x24>, ++ <0x2980080 0x8>; ++ reg-names = "ctrl", ++ "xhci_ec", ++ "xhci_gbl", ++ "usb_phy", ++ "usb_mdio"; ++ brcm,ioc = <0x0>; ++ brcm,ipp = <0x0>; ++ interrupts = <0x30>; ++ interrupt-parent = <&vpu_intr1_nosec_intc>; ++ interrupt-names = "wake"; ++ #phy-cells = <0x1>; ++ brcm,has-xhci; ++ brcm,syscon-piarbctl = <&syscon_piarbctl>; ++ clocks = <&scmi_clk 256>; ++ clock-names = "sw_usb"; ++ }; diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch new file mode 100644 index 0000000000..6127800a43 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/086-v5.12-0004-dt-bindings-phy-brcm-brcmstb-usb-phy-add-BCM4908-bin.patch @@ -0,0 +1,41 @@ +From 46b616c1574def7a1629bdeded3d44e76382f950 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Wed, 6 Jan 2021 21:58:37 +0100 +Subject: [PATCH] dt-bindings: phy: brcm, brcmstb-usb-phy: add BCM4908 binding +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 uses the same PHY and may require just a slightly different +programming. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Acked-by: Florian Fainelli <f.fainelli@gmail.com> +Acked-by: Rob Herring <robh@kernel.org> +Link: https://lore.kernel.org/r/20210106205838.10964-2-zajec5@gmail.com +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + .../devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml ++++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml +@@ -15,6 +15,7 @@ maintainers: + properties: + compatible: + enum: ++ - brcm,bcm4908-usb-phy + - brcm,bcm7211-usb-phy + - brcm,bcm7216-usb-phy + - brcm,brcmstb-usb-phy +@@ -113,7 +114,9 @@ allOf: + properties: + compatible: + contains: +- const: brcm,brcmstb-usb-phy ++ enum: ++ - const: brcm,bcm4908-usb-phy ++ - const: brcm,brcmstb-usb-phy + then: + properties: + reg: diff --git a/target/linux/bcm4908/patches-5.4/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.4/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch new file mode 100644 index 0000000000..c021201f6b --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch @@ -0,0 +1,48 @@ +From 4b402fa8e0b7817f3e3738d7828038f114e6899e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Wed, 6 Jan 2021 21:58:38 +0100 +Subject: [PATCH] phy: phy-brcm-usb: support PHY on the BCM4908 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 seems to have slightly different registers but works when +programmed just like the STB one. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Acked-by: Florian Fainelli <f.fainelli@gmail.com> +Link: https://lore.kernel.org/r/20210106205838.10964-3-zajec5@gmail.com +Signed-off-by: Vinod Koul <vkoul@kernel.org> +--- + drivers/phy/broadcom/Kconfig | 3 ++- + drivers/phy/broadcom/phy-brcm-usb.c | 4 ++++ + 2 files changed, 6 insertions(+), 1 deletion(-) + +--- a/drivers/phy/broadcom/Kconfig ++++ b/drivers/phy/broadcom/Kconfig +@@ -83,10 +83,11 @@ config PHY_BRCM_SATA + + config PHY_BRCM_USB + tristate "Broadcom STB USB PHY driver" +- depends on ARCH_BRCMSTB ++ depends on ARCH_BCM4908 || ARCH_BRCMSTB + depends on OF + select GENERIC_PHY + select SOC_BRCMSTB ++ default ARCH_BCM4908 + default ARCH_BRCMSTB + help + Enable this to support the Broadcom STB USB PHY. +--- a/drivers/phy/broadcom/phy-brcm-usb.c ++++ b/drivers/phy/broadcom/phy-brcm-usb.c +@@ -287,6 +287,10 @@ static const struct match_chip_info chip + + static const struct of_device_id brcm_usb_dt_ids[] = { + { ++ .compatible = "brcm,bcm4908-usb-phy", ++ .data = &chip_info_7445, ++ }, ++ { + .compatible = "brcm,bcm7216-usb-phy", + .data = &chip_info_7216, + }, diff --git a/target/linux/bcm4908/patches-5.4/180-soc-brcmstb-add-stubs-for-getting-platform-IDs.patch b/target/linux/bcm4908/patches-5.4/180-soc-brcmstb-add-stubs-for-getting-platform-IDs.patch new file mode 100644 index 0000000000..366e6089c4 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/180-soc-brcmstb-add-stubs-for-getting-platform-IDs.patch @@ -0,0 +1,50 @@ +From c149974b2ae2e2296c66262a4ee797c06c39982b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Thu, 14 Jan 2021 11:33:01 +0100 +Subject: [PATCH] soc: brcmstb: add stubs for getting platform IDs + +Some brcmstb drivers may be shared with other SoC families. E.g. the +same USB PHY block is shared by brcmstb and BCM4908. + +To avoid building brcmstb common code on non-brcmstb platforms we need +stubs for: +1. brcmstb_get_family_id() +2. brcmstb_get_product_id() +(to avoid "undefined reference to" errors). + +With this change PHY_BRCM_USB will not have to unconditionally select +SOC_BRCMSTB anymore. +--- + include/linux/soc/brcmstb/brcmstb.h | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/include/linux/soc/brcmstb/brcmstb.h ++++ b/include/linux/soc/brcmstb/brcmstb.h +@@ -12,6 +12,8 @@ static inline u32 BRCM_REV(u32 reg) + return reg & 0xff; + } + ++#ifdef CONFIG_SOC_BRCMSTB ++ + /* + * Helper functions for getting family or product id from the + * SoC driver. +@@ -19,4 +21,18 @@ static inline u32 BRCM_REV(u32 reg) + u32 brcmstb_get_family_id(void); + u32 brcmstb_get_product_id(void); + ++#else ++ ++static inline u32 brcmstb_get_family_id(void) ++{ ++ return 0; ++} ++ ++static inline u32 brcmstb_get_product_id(void) ++{ ++ return 0; ++} ++ ++#endif ++ + #endif /* __BRCMSTB_SOC_H */ diff --git a/target/linux/bcm4908/patches-5.4/800-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch b/target/linux/bcm4908/patches-5.4/800-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch new file mode 100644 index 0000000000..965d60c18e --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/800-phy-phy-brcm-usb-select-SOC_BRCMSTB-on-brcmstb-only.patch @@ -0,0 +1,26 @@ +From 73f63c66bf80bebd46d38a2660078dbe3fe11170 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Thu, 14 Jan 2021 12:02:28 +0100 +Subject: [PATCH] phy: phy-brcm-usb: select SOC_BRCMSTB on brcmstb only +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM4908 doesn't need brcmstb SoC stuff compiled. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +--- + drivers/phy/broadcom/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/phy/broadcom/Kconfig ++++ b/drivers/phy/broadcom/Kconfig +@@ -86,7 +86,7 @@ config PHY_BRCM_USB + depends on ARCH_BCM4908 || ARCH_BRCMSTB + depends on OF + select GENERIC_PHY +- select SOC_BRCMSTB ++ select SOC_BRCMSTB if ARCH_BRCMSTB + default ARCH_BCM4908 + default ARCH_BRCMSTB + help |