diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-31 12:46:26 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-03 15:28:50 +0200 |
| commit | e36bdd5dc5bf48fc0102394736c24a075959bc53 (patch) | |
| tree | 65ca24d6be26fa13b0253dd8a29e4bec898fc2e9 /target/linux | |
| parent | 21454a772bd8ccf13923db37a9bf02e48abeb278 (diff) | |
| download | upstream-e36bdd5dc5bf48fc0102394736c24a075959bc53.tar.gz upstream-e36bdd5dc5bf48fc0102394736c24a075959bc53.tar.bz2 upstream-e36bdd5dc5bf48fc0102394736c24a075959bc53.zip | |
ath79: fix LEDs for GL.inet GL-AR150
Since the wireless LED was used for boot and set up with a DT
trigger, the WiFi indication hasn't worked on ath79 at all.
In addition, a look into the manual revealed that the OEM
configuration is as follows:
LED 1 (green): power
LED 2 (green): configurable
LED 3 (red): wireless
So, let's just keep the WiFi trigger and convert the rest to its
"intended" use.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 705fe43522c756962589b360141d4c398363ce1c)
Diffstat (limited to 'target/linux')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/01_leds | 4 | ||||
| -rw-r--r-- | target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts | 18 |
2 files changed, 10 insertions, 12 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index c3fa7f6a61..058ab006e5 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -74,10 +74,6 @@ etactica,eg200) ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33" ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore" ;; -glinet,gl-ar150) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02" - ;; glinet,gl-ar300m-nand|\ glinet,gl-ar300m-nor) ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0" diff --git a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts index 76f6e80236..c5f559bb36 100644 --- a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts +++ b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts @@ -12,28 +12,30 @@ aliases { serial0 = &uart; - led-boot = &wlan; - led-failsafe = &wlan; - led-upgrade = &wlan; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; }; leds { compatible = "gpio-leds"; - wlan: wlan { + wlan { label = "gl-ar150:orange:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; - lan { - label = "gl-ar150:green:lan"; + configurable { + label = "gl-ar150:green:configurable"; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; - wan { - label = "gl-ar150:green:wan"; + led_power: power { + label = "gl-ar150:green:power"; gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; |