diff options
| author | Luis Araneda <luaraneda@gmail.com> | 2017-10-19 00:18:39 -0300 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2017-11-17 08:20:14 +0100 |
| commit | ef1483b8feb85f177e1e0f6e1031201b695ae0bc (patch) | |
| tree | e5b4ef2e9b7722508dbd1fdef476a41e9abd9f6b /target/linux | |
| parent | bf6b3afa8cb06a3a11ffcce88c5b0fe98ed6e9f2 (diff) | |
| download | upstream-ef1483b8feb85f177e1e0f6e1031201b695ae0bc.tar.gz upstream-ef1483b8feb85f177e1e0f6e1031201b695ae0bc.tar.bz2 upstream-ef1483b8feb85f177e1e0f6e1031201b695ae0bc.zip | |
sunxi: base files: add AP6212 (brcm43430) NVRAM
Used by the NanoPi M1 Plus board
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/sunxi/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt | 53 |
1 files changed, 53 insertions, 0 deletions
diff --git a/target/linux/sunxi/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt b/target/linux/sunxi/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt new file mode 100644 index 0000000000..9baa5c33bf --- /dev/null +++ b/target/linux/sunxi/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt @@ -0,0 +1,53 @@ +#AP6212_NVRAM_V1.0_20140603 +# 2.4 GHz, 20 MHz BW mode + +# The following parameter values are just placeholders, need to be updated. +manfid=0x2d0 +prodid=0x0726 +vendid=0x14e4 +devid=0x43e2 +boardtype=0x0726 +boardrev=0x1101 +boardnum=22 +macaddr=00:90:4c:c5:12:38 +sromrev=11 +boardflags=0x00404201 +xtalfreq=26000 +nocrc=1 +ag0=255 +aa2g=1 +ccode=ALL + +pa0itssit=0x20 +extpagain2g=0 + +#PA parameters for 2.4GHz, measured at CHIP OUTPUT +pa2ga0=-168,7161,-820 +AvVmid_c0=0x0,0xc8 +cckpwroffset0=5 + +# PPR params +maxp2ga0=90 +txpwrbckof=6 +cckbw202gpo=0x5555 +legofdmbw202gpo=0x77777777 +mcsbw202gpo=0xaaaaaaaa + +# OFDM IIR : +ofdmdigfilttype=7 +# PAPD mode: +papdmode=2 + +il0macaddr=00:90:4c:c5:12:38 +wl0id=0x431b + +#OOB parameters +hostwake=0x40 +hostrdy=0x41 +usbrdy=0x03 +usbrdydelay=100 +deadman_to=0xffffffff +# muxenab: 0x1 for UART enable, 0x10 for Host awake +muxenab=0x10 +# CLDO PWM voltage settings - 0x4 - 1.1 volt +#cldo_pwm=0x4 |